All MIBs › CISCO-RTTMON-IP-EXT-MIB › crttMonIPEchoAdminNameServerAddress
crttMonIPEchoAdminNameServerAddress
Module: CISCO-RTTMON-IP-EXT-MIB
OID (symbolic): CISCO-RTTMON-IP-EXT-MIB::crttMonIPEchoAdminNameServerAddress
OID (numeric): 1.3.6.1.4.1.9.9.572.1.1.1.6
Node type: OBJECT-TYPE
Type: InetAddress
Access: read-write
Description: A string which specifies the address of the target. This object, together with the crttMonIPEchoAdminNameServerAddrType object, may be used to specify either an IPv6 or an IPv4 address and is an alternative to the rttMonEchoAdminNameServer object, which can only specify an IPv4. In case the target is a V4 IP address then both crttMonIPEchoAdminNameServerAddrType/ crttMonIPEchoAdminNameServerAddress AND rttMonEchoAdminNameServer may be used to specify it so long as both try to specify the same V4 IP address. Alternatively only one of rttMonEchoAdminNameServer OR crttMonIPEchoAdminNameServerAddrType/ crttMonIPEchoAdminNameServerAddress may be used to specify the V4 IP address, in which case the other may either not be instantiated or contain a zero length string. In case the the target is a V6 IP address then only crttMonIPEchoAdminNameServerAddrType/ crttMonIPEchoAdminNameServerAddress must be used and rttMonEchoAdminNameServer may not be instantiated or may have a zero length string.
What is crttMonIPEchoAdminNameServerAddress?
Read-write string giving the address of the DNS name server used by an IP SLA echo operation to resolve the test target, supporting both IPv4 and IPv6.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.572.1.1.1.6 snmpwalk -v2c -c public <target> CISCO-RTTMON-IP-EXT-MIB::crttMonIPEchoAdminNameServerAddress
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.572.1.1.1.6.1 snmpget -v2c -c public <target> CISCO-RTTMON-IP-EXT-MIB::crttMonIPEchoAdminNameServerAddress.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.572.1.1.1.6.1 s <value>
Start monitoring Cisco routers/switches running IP SLA with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-RTTMON-IP-EXT-MIB::crttMonIPEchoAdminNameServerAddress OID value, configure state conditions and alerts, and monitor any Cisco routers/switches running IP SLA from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.572 | ciscoRttMonIPExtMIB | CISCO-RTTMON-IP-EXT-MIB |
| 1.3.6.1.4.1.9.9.572.1 | crttMonIPExtObjects | CISCO-RTTMON-IP-EXT-MIB |
| 1.3.6.1.4.1.9.9.572.1.1 | crttMonIPEchoAdminTable | CISCO-RTTMON-IP-EXT-MIB |
| 1.3.6.1.4.1.9.9.572.1.1.1 | crttMonIPEchoAdminEntry | CISCO-RTTMON-IP-EXT-MIB |
| 1.3.6.1.4.1.9.9.572.1.1.1.6 | crttMonIPEchoAdminNameServerAddress | CISCO-RTTMON-IP-EXT-MIB |