All MIBs › CISCO-RTTMON-IP-EXT-MIB › crttMonIPEchoAdminLSPSelAddress
crttMonIPEchoAdminLSPSelAddress
Module: CISCO-RTTMON-IP-EXT-MIB
OID (symbolic): CISCO-RTTMON-IP-EXT-MIB::crttMonIPEchoAdminLSPSelAddress
OID (numeric): 1.3.6.1.4.1.9.9.572.1.1.1.8
Node type: OBJECT-TYPE
Type: InetAddress
Access: read-write
Description: A string which specifies the address of the LSP Selector. This object, in conjunction with the crttMonIPEchoAdminLSPSelAddrType object, may be used to specify either an IPv6 or an IPv4 address and is an alternative to the rttMonEchoAdminLSPSelector object, which can only specify an IPv4 address.In case the target is a V4 IP address then both crttMonIPEchoAdminLSPSelAddrType/ crttMonIPEchoAdminLSPSelAddress AND rttMonEchoAdminLSPSelector may be used to specify it so long as both try to specify the same V4 IP address. Alternatively only one of rttMonEchoAdminLSPSelector OR crttMonIPEchoAdminLSPSelAddrType/ crttMonIPEchoAdminLSPSelAddress may be used to specify the V4 IP address, in which case the other may either not be instantiated or contain a zero length string. In case the the target is a V6 IP address then only crttMonIPEchoAdminLSPSelAddrType/ crttMonIPEchoAdminLSPSelAddress must be used and rttMonEchoAdminLSPSelector may not be instantiated or may have a zero length string.
What is crttMonIPEchoAdminLSPSelAddress?
Read-write string specifying the LSP (Label Switched Path) selector address, IPv4 or IPv6, used to steer an IP SLA operation's probes onto a particular MPLS path.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.572.1.1.1.8 snmpwalk -v2c -c public <target> CISCO-RTTMON-IP-EXT-MIB::crttMonIPEchoAdminLSPSelAddress
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.572.1.1.1.8.1 snmpget -v2c -c public <target> CISCO-RTTMON-IP-EXT-MIB::crttMonIPEchoAdminLSPSelAddress.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.572.1.1.1.8.1 s <value>
Start monitoring Cisco routers/switches running IP SLA with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-RTTMON-IP-EXT-MIB::crttMonIPEchoAdminLSPSelAddress OID value, configure state conditions and alerts, and monitor any Cisco routers/switches running IP SLA from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.572 | ciscoRttMonIPExtMIB | CISCO-RTTMON-IP-EXT-MIB |
| 1.3.6.1.4.1.9.9.572.1 | crttMonIPExtObjects | CISCO-RTTMON-IP-EXT-MIB |
| 1.3.6.1.4.1.9.9.572.1.1 | crttMonIPEchoAdminTable | CISCO-RTTMON-IP-EXT-MIB |
| 1.3.6.1.4.1.9.9.572.1.1.1 | crttMonIPEchoAdminEntry | CISCO-RTTMON-IP-EXT-MIB |
| 1.3.6.1.4.1.9.9.572.1.1.1.8 | crttMonIPEchoAdminLSPSelAddress | CISCO-RTTMON-IP-EXT-MIB |