CISCO-MEGACO-EXT-MIB :: cmedxGatewayStateChangeMethod

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-MEGACO-EXT-MIBcmedxGatewayStateChangeMethod

cmedxGatewayStateChangeMethod

Module: CISCO-MEGACO-EXT-MIB

OID (symbolic): CISCO-MEGACO-EXT-MIB::cmedxGatewayStateChangeMethod

OID (numeric): 1.3.6.1.4.1.9.10.104.1.1.1.1.21

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This object indicates the method for the operational state change (cmedGatewayOperStatus) in the media gateway link.

other (1) - None of the methods listed below. graceful (2) - The state change to 'down(2)' is by the way of graceful out of service. forced (3) - The state change to 'down(2)' is by the way of forced out of service. handoff (4) - The state change is by the way that the MGC hands off to another MGC. failover (5) - The state change is by the way that MG reconnects to current MGC because of the failure of previous MGC. restart (6) - The state change is by the way that MG or MGC restarts. disconnect (7) - The state change is by the way that MG brings down the service because of the MG port has been modified, the number of retries has exhausted, or the inactivity timer has expired. cancelGraceful (8) - After issuing graceful out of service with a delay (cmedxGatewayDownServiceDelay>0), MG then sends an in-service command before the delay has been expired.

What is cmedxGatewayStateChangeMethod?

This read-only object indicates how the media gateway link's operational state transitioned to its current state, for example gracefully versus other methods.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.104.1.1.1.1.21
snmpwalk -v2c -c public <target> CISCO-MEGACO-EXT-MIB::cmedxGatewayStateChangeMethod

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.104.1.1.1.1.21.1
snmpget -v2c -c public <target> CISCO-MEGACO-EXT-MIB::cmedxGatewayStateChangeMethod.1

Start monitoring Cisco media gateway/media gateway controller (H.248/Megaco) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-MEGACO-EXT-MIB::cmedxGatewayStateChangeMethod OID value, configure state conditions and alerts, and monitor any Cisco media gateway/media gateway controller (H.248/Megaco) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.104ciscoMegacoExtMIBCISCO-MEGACO-EXT-MIB
1.3.6.1.4.1.9.10.104.1ciscoMegacoExtMIBObjectsCISCO-MEGACO-EXT-MIB
1.3.6.1.4.1.9.10.104.1.1cmedxConfigCISCO-MEGACO-EXT-MIB
1.3.6.1.4.1.9.10.104.1.1.1cmedxGatewayConfigTableCISCO-MEGACO-EXT-MIB
1.3.6.1.4.1.9.10.104.1.1.1.1cmedxGatewayConfigEntryCISCO-MEGACO-EXT-MIB
1.3.6.1.4.1.9.10.104.1.1.1.1.21cmedxGatewayStateChangeMethodCISCO-MEGACO-EXT-MIB