CIENA-WS-SYSTEM-MIB

All MIBs › CIENA-WS-SYSTEM-MIB

Organization: Ciena Corporation

Last Updated: 2017-07-26

Category: Device Management, Optical and WDM, Vendor: Ciena

Description: Monitors system-level parameters including uptime, identity, and health on Ciena WaveServer platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CIENA-WS-SYSTEM-MIB?

CIENA-WS-SYSTEM-MIB is a Ciena proprietary MIB, auto-derived from a YANG/NETCONF module, providing system-level representation for Ciena's WaveServer DWDM optical transport platform. Per its overall design it covers general system identity, uptime, and health, while the available sample objects show site and group organizational metadata — site name, description, geographic latitude/longitude, and address, plus system group membership. It supports monitoring the software/system status of a WaveServer node by associating it with a physical site and logical group for topology-aware health reporting, alongside the uptime/identity/health objects the system-level module is intended to expose. It is derived from a YANG data model translated for NETCONF/SNMP use and would work alongside Ciena's other WaveServer MIBs covering interfaces and optics. It is typically deployed on Ciena WaveServer optical transport platforms in service-provider or enterprise DWDM networks. Engineers can download the CIENA-WS-SYSTEM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CIENA-WS-SYSTEM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ciena WaveServer optical transport platform

Monitoring Examples

An administrator would poll cwsSystemSiteTable (via cwsSystemSiteEntry/cwsSystemSiteId) to retrieve cwsSystemSiteName, cwsSystemSiteLatitude/Longitude, and cwsSystemSiteAddress, correlating alarms from a given WaveServer node with its physical site location. Polling cwsSystemGroupTable would similarly reveal which logical group a system belongs to, useful for aggregating status across related WaveServer nodes in a topology view.

What Can Be Monitored

system site identity and location
site geographic coordinates and address
system group membership
overall system health/uptime (per module design)

Imported Objects

From CIENA-WS-MIB

cienaWsConfig

OBJECT-IDENTITY

From CIENA-WS-TYPEDEFS-MIB

EnabledDisabledEnum
StringMaxl128
StringMaxl16
StringMaxl256
StringMaxl32
StringMaxl64

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
cienaWsSystemCompliance	1.3.6.1.4.1.1271.3.4.12.2.2.1			Compliance
cienaWsSystemCompliances	1.3.6.1.4.1.1271.3.4.12.2.2
cienaWsSystemConformance	1.3.6.1.4.1.1271.3.4.12.2
cienaWsSystemGroup	1.3.6.1.4.1.1271.3.4.12.2.1.1			Conformance Group
cienaWsSystemGroups	1.3.6.1.4.1.1271.3.4.12.2.1
cienaWsSystemMIB	1.3.6.1.4.1.1271.3.4.12			This YANG module defines Ciena's WaveServer System representation for the NETCONF protocol
cienaWsSystemObjects	1.3.6.1.4.1.1271.3.4.12.1
ENA cwsSystemDhcpAdminState	1.3.6.1.4.1.1271.3.4.12.21.1.2	EnabledDisabledEnum	read-only	DHCP Client Administrative State
cwsSystemDhcpEntry	1.3.6.1.4.1.1271.3.4.12.21.1		not-accessible	Entry for cwsSystemDhcpTable.
cwsSystemDhcpTable	1.3.6.1.4.1.1271.3.4.12.21		not-accessible	Waveserver DHCP client configuration attributes.
I32 cwsSystemDhcpTableSnmpKey	1.3.6.1.4.1.1271.3.4.12.21.1.1	Integer32	not-accessible	Unique key for cwsSystemDhcp
ENA cwsSystemFrontDisplayAdminState	1.3.6.1.4.1.1271.3.4.12.14.1.2	EnabledDisabledEnum	read-write	Display is enabled or disabled. When the display is disabled, it will be turned off and will not be woken up by pressing on the faceplate navigation buttons
cwsSystemFrontDisplayEntry	1.3.6.1.4.1.1271.3.4.12.14.1		not-accessible	Entry for cwsSystemFrontDisplayTable.
ENA cwsSystemFrontDisplayInputButtonState	1.3.6.1.4.1.1271.3.4.12.14.1.5	EnabledDisabledEnum	read-write	Enable or disable display input control.
ENA cwsSystemFrontDisplayScreensaverState	1.3.6.1.4.1.1271.3.4.12.14.1.3	EnabledDisabledEnum	read-write	Screensaver is enabled or disabled. When the screensaver is enabled, the LED display on the faceplate will be automatically turned off after N minutes of inactivity. If an input button is pressed, it will turn the display back on. The length of the screensaver idle time is controlled by the screensaver-timeout parameter.
U32 cwsSystemFrontDisplayScreensaverTimeout	1.3.6.1.4.1.1271.3.4.12.14.1.4	Unsigned32	read-write	Number of minutes before screensaver activates. The screensaver can be disabled via the display-screensaver-state attribute. The display can be completely disabled via the display-admin-state attribute.
cwsSystemFrontDisplayTable	1.3.6.1.4.1.1271.3.4.12.14		not-accessible	Waveserver system front display configuration.
I32 cwsSystemFrontDisplayTableSnmpKey	1.3.6.1.4.1.1271.3.4.12.14.1.1	Integer32	not-accessible	Unique key for cwsSystemFrontDisplay
OCT cwsSystemFrontDisplayUserMessage	1.3.6.1.4.1.1271.3.4.12.14.1.7	OCTET STRING	read-write	Message to be shown on the display. This is a custom message to be displayed on the LED display.
ENA cwsSystemFrontDisplayUserMessageState	1.3.6.1.4.1.1271.3.4.12.14.1.6	EnabledDisabledEnum	read-write	Enable or disable user message display. If a user-message has been provisioned, enabling it via this parameter will display that message on the LED display. This leaf is now obsolete in WS 1.5
cwsSystemFtpEntry	1.3.6.1.4.1.1271.3.4.12.11.1		not-accessible	Entry for cwsSystemFtpTable.
STR cwsSystemFtpHostName	1.3.6.1.4.1.1271.3.4.12.11.1.2	StringMaxl64	read-write	FTP host name configured by user.
STR cwsSystemFtpPassword	1.3.6.1.4.1.1271.3.4.12.11.1.4	StringMaxl128	read-write	FTP password string.
STR cwsSystemFtpSecret	1.3.6.1.4.1.1271.3.4.12.11.1.5	StringMaxl256	read-write	FTP secret string.
cwsSystemFtpTable	1.3.6.1.4.1.1271.3.4.12.11		not-accessible	Waveserver system FTP configuration.
I32 cwsSystemFtpTableSnmpKey	1.3.6.1.4.1.1271.3.4.12.11.1.1	Integer32	not-accessible	Unique key for cwsSystemFtp
STR cwsSystemFtpUserName	1.3.6.1.4.1.1271.3.4.12.11.1.3	StringMaxl32	read-write	FTP user name.
STR cwsSystemGlobalProvisioningChassisFunctionality	1.3.6.1.4.1.1271.3.4.12.13.1.6	StringMaxl16	read-write	Description of chassis functionality, used by MCP.
cwsSystemGlobalProvisioningEntry	1.3.6.1.4.1.1271.3.4.12.13.1		not-accessible	Entry for cwsSystemGlobalProvisioningTable.
T/F cwsSystemGlobalProvisioningFcsErrorForwarding	1.3.6.1.4.1.1271.3.4.12.13.1.5	TruthValue	read-write	FCS error forwarding settings.
ENA cwsSystemGlobalProvisioningLampTest	1.3.6.1.4.1.1271.3.4.12.13.1.3	EnabledDisabledEnum	read-write	Enable to initiate chassis level lamp test. Disable to end the test.
ENA cwsSystemGlobalProvisioningLowPowerMode	1.3.6.1.4.1.1271.3.4.12.13.1.2	EnabledDisabledEnum	read-write	Low power mode is enabled or disabled
ENA cwsSystemGlobalProvisioningResetToFactoryDefaultButton	1.3.6.1.4.1.1271.3.4.12.13.1.4	EnabledDisabledEnum	read-write	Indicate whether the reset button for reset to factory default is enabled. If enabled, the reset button on the faceplate will trigger a reset to factory default settings
cwsSystemGlobalProvisioningTable	1.3.6.1.4.1.1271.3.4.12.13		not-accessible	Waveserver system global provisioning attributes.
I32 cwsSystemGlobalProvisioningTableSnmpKey	1.3.6.1.4.1.1271.3.4.12.13.1.1	Integer32	not-accessible	Unique key for cwsSystemGlobalProvisioning
OCT cwsSystemGroupDescription	1.3.6.1.4.1.1271.3.4.12.4.1.4	OCTET STRING	read-write	A description for the group of Waveservers.
cwsSystemGroupEntry	1.3.6.1.4.1.1271.3.4.12.4.1		not-accessible	Entry for cwsSystemGroupTable.
U32 cwsSystemGroupId	1.3.6.1.4.1.1271.3.4.12.4.1.2	Unsigned32	read-write	An integer to uniquely identify a group of Waveservers within a site.
OCT cwsSystemGroupName	1.3.6.1.4.1.1271.3.4.12.4.1.3	OCTET STRING	read-write	A name for the group of Waveservers.
cwsSystemGroupTable	1.3.6.1.4.1.1271.3.4.12.4		not-accessible	Waveserver system group attributes.
I32 cwsSystemGroupTableSnmpKey	1.3.6.1.4.1.1271.3.4.12.4.1.1	Integer32	not-accessible	Unique key for cwsSystemGroup
STR cwsSystemHostNameConfigHostName	1.3.6.1.4.1.1271.3.4.12.6.1.3	StringMaxl64	read-write	User configured host name.
STR cwsSystemHostNameCurrentHostName	1.3.6.1.4.1.1271.3.4.12.6.1.2	StringMaxl64	read-only	Current host name.
STR cwsSystemHostNameDhcpHostName	1.3.6.1.4.1.1271.3.4.12.6.1.4	StringMaxl64	read-only	DHCP Host name.
cwsSystemHostNameEntry	1.3.6.1.4.1.1271.3.4.12.6.1		not-accessible	Entry for cwsSystemHostNameTable.
cwsSystemHostNameTable	1.3.6.1.4.1.1271.3.4.12.6		not-accessible	Waveserver system host name attributes.
I32 cwsSystemHostNameTableSnmpKey	1.3.6.1.4.1.1271.3.4.12.6.1.1	Integer32	not-accessible	Unique key for cwsSystemHostName
cwsSystemLampFlashTestEntry	1.3.6.1.4.1.1271.3.4.12.16.1		not-accessible	Entry for cwsSystemLampFlashTestTable.
LAM cwsSystemLampFlashTestMode	1.3.6.1.4.1.1271.3.4.12.16.1.3	LampModeEnum	read-only	Lamp mode selection. The default mode is flash. It is the only mode supported
ENA cwsSystemLampFlashTestOperationalState	1.3.6.1.4.1.1271.3.4.12.16.1.2	EnabledDisabledEnum	read-only	Lamp flash test operational state. It reflects whether the lamp flash test is enabled or disabled.
BIT cwsSystemLampFlashTestPorts	1.3.6.1.4.1.1271.3.4.12.16.1.6	Bits	read-write	Ports selected for lamp flash test. The bits in this leaf represent port number from 1 to 12, starting from position 1. When target-type is port and lamp-flash-test is enabled, the selected ports (bit is set) will have its lamp operate in the mode set. When the target-type is chassis, this leaf should not be specified or should be empty.
cwsSystemLampFlashTestTable	1.3.6.1.4.1.1271.3.4.12.16		not-accessible	Waveserver lamp flash test attributes.
I32 cwsSystemLampFlashTestTableSnmpKey	1.3.6.1.4.1.1271.3.4.12.16.1.1	Integer32	not-accessible	Unique key for cwsSystemLampFlashTest
LAM cwsSystemLampFlashTestTargetType	1.3.6.1.4.1.1271.3.4.12.16.1.4	LampTargetTypeEnum	read-write	Lamp testing target type. It can be chassis or port. The default type is chassis. When the target-type is port, the port list should be set for the selected ports to be tested.
U32 cwsSystemLampFlashTestTimeout	1.3.6.1.4.1.1271.3.4.12.16.1.5	Unsigned32	read-write	The number of minutes the lamp flash testing will be operating when enabled. The default timeout value is 30 minutes
BAN cwsSystemLineConfigBandPlan	1.3.6.1.4.1.1271.3.4.12.15.1.2	BandplanEnum	read-write	Band Plan. The band plan is a way of selecting a mapping between channels and wavelengths/frequencies. The selected band plan should correspond to the band plan on the line system. The band plan is used to automatically select the next wavelength or frequency for newly installed Waveservers based on the member-id assigned to the device. Modifying Band plan will have an effect on PTP attributes. Software will automatically assign a per-defined PTP Wavelength, Frequency, and Channel combination from selected Band Plan. Note that the automatic reassignment will only occur when a valid Band Plan is already provisioned (i.e. existing Band Plan is not equal to None), the existing PTP Wavelength, Frequency, and Channel have value of zero, and user provisions Member ID from 0 to a non-zero value (i.e. from 'uncommisioned' state to 'commissioned' state) that's within the maximum wavelength allocation specified in the Band Plan (each Member ID reserves two wavelengths) . Software shall automatically update existing channel number provisioning when user changes Band Plan provisioning. Channel number shall be set to 0 if provisioned wavelength/frequency is not found in the new Band Plan or the new Band Plan equals to None.
cwsSystemLineConfigEntry	1.3.6.1.4.1.1271.3.4.12.15.1		not-accessible	Entry for cwsSystemLineConfigTable.
LIN cwsSystemLineConfigLineProtection	1.3.6.1.4.1.1271.3.4.12.15.1.3	LineProtectionEnum	read-write	Line protection settings. If line protection is enabled, this means that the photonic line the Waveserver is connected to has protection enabled. In the event of a line side fault, the protection card on the line side will select the protection path and the modems will reacquire the signal on the alternate path. While the switch is occuring, link state messaging will be disabled to the clients so that the connected devices do not attempt a switch or a restoration.
cwsSystemLineConfigTable	1.3.6.1.4.1.1271.3.4.12.15		not-accessible	Waveserver system line configuration.
I32 cwsSystemLineConfigTableSnmpKey	1.3.6.1.4.1.1271.3.4.12.15.1.1	Integer32	not-accessible	Unique key for cwsSystemLineConfig
OCT cwsSystemMemberDescription	1.3.6.1.4.1.1271.3.4.12.5.1.4	OCTET STRING	read-write	A description for the Waveserver chassis.
cwsSystemMemberEntry	1.3.6.1.4.1.1271.3.4.12.5.1		not-accessible	Entry for cwsSystemMemberTable.
OCT cwsSystemMemberFrameIdentification	1.3.6.1.4.1.1271.3.4.12.5.1.5	OCTET STRING	read-write	A description to identify the location of the Waveserver chassis within the data center. For example, the building, floor, aisle, frame number, etc.
U32 cwsSystemMemberId	1.3.6.1.4.1.1271.3.4.12.5.1.2	Unsigned32	read-write	An integer to uniquely identify a Waveserver chassis within a group of Waveservers. Initial configuration of this identifier automatically assigns 2 specific wavelengths for the Ciena wavelength grid to the Wavelogic 3 Extreme ports 1 and 12. Wavelengths can also be manually assigned independently.
OCT cwsSystemMemberName	1.3.6.1.4.1.1271.3.4.12.5.1.3	OCTET STRING	read-write	A name for the Waveserver chassis.
U32 cwsSystemMemberRackUnitNumber	1.3.6.1.4.1.1271.3.4.12.5.1.6	Unsigned32	read-write	A logical identifier for the Waveservers location within the frame or rack. For example, the device at the top could be labelled unit 1.
cwsSystemMemberTable	1.3.6.1.4.1.1271.3.4.12.5		not-accessible	Waveserver system member attributes.
I32 cwsSystemMemberTableSnmpKey	1.3.6.1.4.1.1271.3.4.12.5.1.1	Integer32	not-accessible	Unique key for cwsSystemMember
cwsSystemRootEntry	1.3.6.1.4.1.1271.3.4.12.18.1		not-accessible	Entry for cwsSystemRootTable.
STR cwsSystemRootPassword	1.3.6.1.4.1.1271.3.4.12.18.1.2	StringMaxl128	read-only	User root password string.
cwsSystemRootTable	1.3.6.1.4.1.1271.3.4.12.18		not-accessible	Waveserver system user root configuration.
I32 cwsSystemRootTableSnmpKey	1.3.6.1.4.1.1271.3.4.12.18.1.1	Integer32	not-accessible	Unique key for cwsSystemRoot
cwsSystemScpEntry	1.3.6.1.4.1.1271.3.4.12.19.1		not-accessible	Entry for cwsSystemScpTable.
STR cwsSystemScpHostName	1.3.6.1.4.1.1271.3.4.12.19.1.2	StringMaxl64	read-write	SCP host name configured by user.
STR cwsSystemScpPassword	1.3.6.1.4.1.1271.3.4.12.19.1.4	StringMaxl128	read-write	SCP password string.
STR cwsSystemScpSecret	1.3.6.1.4.1.1271.3.4.12.19.1.5	StringMaxl256	read-write	SCP secret string.
cwsSystemScpTable	1.3.6.1.4.1.1271.3.4.12.19		not-accessible	Waveserver system SCP configuration.
I32 cwsSystemScpTableSnmpKey	1.3.6.1.4.1.1271.3.4.12.19.1.1	Integer32	not-accessible	Unique key for cwsSystemScp
STR cwsSystemScpUserName	1.3.6.1.4.1.1271.3.4.12.19.1.3	StringMaxl32	read-write	SCP user name.
cwsSystemServerConfigEntry	1.3.6.1.4.1.1271.3.4.12.8.1		not-accessible	Entry for cwsSystemServerConfigTable.
ENA cwsSystemServerConfigNetconfServerState	1.3.6.1.4.1.1271.3.4.12.8.1.4	EnabledDisabledEnum	read-write	Indicate whether netconf server is enabled.
ENA cwsSystemServerConfigRestconfServerState	1.3.6.1.4.1.1271.3.4.12.8.1.5	EnabledDisabledEnum	read-write	Indicate whether RESTCONF server is enabled, HTTPS only.
ENA cwsSystemServerConfigSftpServerState	1.3.6.1.4.1.1271.3.4.12.8.1.2	EnabledDisabledEnum	read-write	Indicate whether SFTP server is enabled.
cwsSystemServerConfigTable	1.3.6.1.4.1.1271.3.4.12.8		not-accessible	Waveserver system server configuration attributes.
I32 cwsSystemServerConfigTableSnmpKey	1.3.6.1.4.1.1271.3.4.12.8.1.1	Integer32	not-accessible	Unique key for cwsSystemServerConfig
ENA cwsSystemServerConfigWebServerState	1.3.6.1.4.1.1271.3.4.12.8.1.3	EnabledDisabledEnum	read-write	Indicate whether web server is enabled, HTTPS only.
cwsSystemSftpEntry	1.3.6.1.4.1.1271.3.4.12.12.1		not-accessible	Entry for cwsSystemSftpTable.
STR cwsSystemSftpHostName	1.3.6.1.4.1.1271.3.4.12.12.1.2	StringMaxl64	read-write	SFTP host name configured by user.
STR cwsSystemSftpPassword	1.3.6.1.4.1.1271.3.4.12.12.1.4	StringMaxl128	read-write	SFTP password string.
STR cwsSystemSftpSecret	1.3.6.1.4.1.1271.3.4.12.12.1.5	StringMaxl256	read-write	SFTP secret string.
cwsSystemSftpTable	1.3.6.1.4.1.1271.3.4.12.12		not-accessible	Waveserver system SFTP configuration.
I32 cwsSystemSftpTableSnmpKey	1.3.6.1.4.1.1271.3.4.12.12.1.1	Integer32	not-accessible	Unique key for cwsSystemSftp
STR cwsSystemSftpUserName	1.3.6.1.4.1.1271.3.4.12.12.1.3	StringMaxl32	read-write	SFTP user name.
OCT cwsSystemSiteAddress	1.3.6.1.4.1.1271.3.4.12.3.1.7	OCTET STRING	read-write	The street address of the site.
OCT cwsSystemSiteDescription	1.3.6.1.4.1.1271.3.4.12.3.1.4	OCTET STRING	read-write	The site description
cwsSystemSiteEntry	1.3.6.1.4.1.1271.3.4.12.3.1		not-accessible	Entry for cwsSystemSiteTable.
U32 cwsSystemSiteId	1.3.6.1.4.1.1271.3.4.12.3.1.2	Unsigned32	read-write	An integer to uniquely identify the site where this Waveserver is located. This is used to help group Waveservers together with line system equipment. All equipment in a common site should share the same site identifier.
DEC cwsSystemSiteLatitude	1.3.6.1.4.1.1271.3.4.12.3.1.5	Decimal32Len5	read-write	Geographic coordinate for the site location in degrees.
DEC cwsSystemSiteLongitude	1.3.6.1.4.1.1271.3.4.12.3.1.6	Decimal32Len5	read-write	Geographic coordinate for the site location in degrees.
OCT cwsSystemSiteName	1.3.6.1.4.1.1271.3.4.12.3.1.3	OCTET STRING	read-write	The name for the site where the Waveserver is located.
cwsSystemSiteTable	1.3.6.1.4.1.1271.3.4.12.3		not-accessible	Waveserver system site attributes.
I32 cwsSystemSiteTableSnmpKey	1.3.6.1.4.1.1271.3.4.12.3.1.1	Integer32	not-accessible	Unique key for cwsSystemSite
STR cwsSystemTftpConfigHostName	1.3.6.1.4.1.1271.3.4.12.10.1.2	StringMaxl64	read-write	TFTP host name configured by user.
STR cwsSystemTftpCurrentHostName	1.3.6.1.4.1.1271.3.4.12.10.1.4	StringMaxl64	read-write	TFTP current host name.
STR cwsSystemTftpDhcpHostName	1.3.6.1.4.1.1271.3.4.12.10.1.3	StringMaxl64	read-write	TFTP DHCP host name.
cwsSystemTftpEntry	1.3.6.1.4.1.1271.3.4.12.10.1		not-accessible	Entry for cwsSystemTftpTable.
cwsSystemTftpTable	1.3.6.1.4.1.1271.3.4.12.10		not-accessible	Waveserver system TFTP configuration.
I32 cwsSystemTftpTableSnmpKey	1.3.6.1.4.1.1271.3.4.12.10.1.1	Integer32	not-accessible	Unique key for cwsSystemTftp
OCT cwsSystemTimeConfigCoordinatedUniversalTime	1.3.6.1.4.1.1271.3.4.12.7.1.7	OCTET STRING	read-only	UTC date and time Time
OCT cwsSystemTimeConfigDate	1.3.6.1.4.1.1271.3.4.12.7.1.2	OCTET STRING	read-write	Date: must be in format: yyyy-mm-dd, or yy-mm-dd, or mm-dd.
cwsSystemTimeConfigEntry	1.3.6.1.4.1.1271.3.4.12.7.1		not-accessible	Entry for cwsSystemTimeConfigTable.
OCT cwsSystemTimeConfigLocalDateTime	1.3.6.1.4.1.1271.3.4.12.7.1.6	OCTET STRING	read-only	Local date and time Time
OCT cwsSystemTimeConfigSystemUptime	1.3.6.1.4.1.1271.3.4.12.7.1.8	OCTET STRING	read-only	Time since last reboot, in format: xxxd xxh xxm xxs
cwsSystemTimeConfigTable	1.3.6.1.4.1.1271.3.4.12.7		not-accessible	Waveserver system time configuration attributes.
I32 cwsSystemTimeConfigTableSnmpKey	1.3.6.1.4.1.1271.3.4.12.7.1.1	Integer32	not-accessible	Unique key for cwsSystemTimeConfig
OCT cwsSystemTimeConfigTime	1.3.6.1.4.1.1271.3.4.12.7.1.3	OCTET STRING	read-write	Time: must be in format: hh:mm:ss
DEC cwsSystemTimeConfigTimeOffset	1.3.6.1.4.1.1271.3.4.12.7.1.4	Decimal32Len2	read-write	System time-offset from UTC in seconds.
INT cwsSystemTimeConfigTimeStamp	1.3.6.1.4.1.1271.3.4.12.7.1.5	INTEGER	read-write	System time stamp format: local time or UTC time.
cwsSystemXftpConfigEntry	1.3.6.1.4.1.1271.3.4.12.9.1		not-accessible	Entry for cwsSystemXftpConfigTable.
INT cwsSystemXftpConfigMode	1.3.6.1.4.1.1271.3.4.12.9.1.2	INTEGER	read-only	XFTP mode: FTP, SFTP, or TFTP
cwsSystemXftpConfigTable	1.3.6.1.4.1.1271.3.4.12.9		not-accessible	Waveserver system XFTP configuration attributes.
I32 cwsSystemXftpConfigTableSnmpKey	1.3.6.1.4.1.1271.3.4.12.9.1.1	Integer32	not-accessible	Unique key for cwsSystemXftpConfig

RFC description

Vendor-private MIB for Ciena WaveServer optical transport platforms; defines system configuration, service state, and environmental monitoring.

Start monitoring Ciena WaveServer optical transport platform with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CIENA-WS-SYSTEM-MIB

What Is CIENA-WS-SYSTEM-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description