CIENA-CES-MPLS-MIB :: cienaCesMplsStaticTransitTunnelOutgoingPackets

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCIENA-CES-MPLS-MIBcienaCesMplsStaticTransitTunnelOutgoingPackets

cienaCesMplsStaticTransitTunnelOutgoingPackets

Module: CIENA-CES-MPLS-MIB

OID (symbolic): CIENA-CES-MPLS-MIB::cienaCesMplsStaticTransitTunnelOutgoingPackets

OID (numeric): 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.20

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: The number of outgoing packets for the given transit tunnel. This object is supported only on specific platforms.

What is cienaCesMplsStaticTransitTunnelOutgoingPackets?

This object counts the number of outgoing packets forwarded for this specific transit tunnel after the label swap, and as the description notes, is only supported on certain platforms. Comparing this against cienaCesMplsStaticTransitTunnelIncomingPackets on the same row reveals whether this transit hop is silently dropping a portion of the LSP's traffic internally, since a healthy transiting LSP should show incoming and outgoing packet counts tracking closely together over time. For example, an incoming counter climbing steadily while the outgoing counter on the same row stays flat indicates this specific router is dropping transit traffic for this tunnel rather than the problem lying elsewhere in the path.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.20
snmpwalk -v2c -c public <target> CIENA-CES-MPLS-MIB::cienaCesMplsStaticTransitTunnelOutgoingPackets

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.20.1
snmpget -v2c -c public <target> CIENA-CES-MPLS-MIB::cienaCesMplsStaticTransitTunnelOutgoingPackets.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cienaCesMplsStaticTransitTunnelOutgoingPackets.1

Start monitoring Ciena Carrier Ethernet switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-MPLS-MIB::cienaCesMplsStaticTransitTunnelOutgoingPackets OID value, configure state conditions and alerts, and monitor any Ciena Carrier Ethernet switches from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1271cienaCIENA-SMI
1.3.6.1.4.1.1271.2cienaCesCIENA-SMI
1.3.6.1.4.1.1271.2.1cienaCesConfigCIENA-SMI
Numeric OIDNameModule
1.3.6.1.4.1.1271.2.1.18cienaCesMplsMIBCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1cienaCesMplsMIBObjectsCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1.1cienaCesMplsCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1.1.6cienaCesMplsStaticTransitTunnelTableCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1.1.6.1cienaCesMplsStaticTransitTunnelEntryCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1.1.6.1.20cienaCesMplsStaticTransitTunnelOutgoingPacketsCIENA-CES-MPLS-MIB