CIENA-CES-MPLS-MIB :: cienaCesMplsStaticIngressTunnelReversionTimeout

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCIENA-CES-MPLS-MIBcienaCesMplsStaticIngressTunnelReversionTimeout

cienaCesMplsStaticIngressTunnelReversionTimeout

Module: CIENA-CES-MPLS-MIB

OID (symbolic): CIENA-CES-MPLS-MIB::cienaCesMplsStaticIngressTunnelReversionTimeout

OID (numeric): 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.17

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This object represents the tunnel reversion hold time in seconds before the primary encap tunnel switches back as active tunnel in its tunnel group.

What is cienaCesMplsStaticIngressTunnelReversionTimeout?

This object sets the hold time, in seconds, that the primary encap tunnel in a group must stay continuously healthy before traffic reverts back to it, as the description states. This delay exists specifically to avoid flapping: a primary that comes back up only to fail again moments later shouldn't cause traffic to bounce back and forth between it and the backup. For example, a reversion timeout of 300 seconds means the primary tunnel must remain stable for a full five minutes before traffic switches back to it after an earlier failure.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.17
snmpwalk -v2c -c public <target> CIENA-CES-MPLS-MIB::cienaCesMplsStaticIngressTunnelReversionTimeout

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.17.1
snmpget -v2c -c public <target> CIENA-CES-MPLS-MIB::cienaCesMplsStaticIngressTunnelReversionTimeout.1

Start monitoring Ciena Carrier Ethernet switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-MPLS-MIB::cienaCesMplsStaticIngressTunnelReversionTimeout OID value, configure state conditions and alerts, and monitor any Ciena Carrier Ethernet switches from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1271cienaCIENA-SMI
1.3.6.1.4.1.1271.2cienaCesCIENA-SMI
1.3.6.1.4.1.1271.2.1cienaCesConfigCIENA-SMI
Numeric OIDNameModule
1.3.6.1.4.1.1271.2.1.18cienaCesMplsMIBCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1cienaCesMplsMIBObjectsCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1.1cienaCesMplsCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1.1.2cienaCesMplsStaticIngressTunnelTableCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1.1.2.1cienaCesMplsStaticIngressTunnelEntryCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1.1.2.1.17cienaCesMplsStaticIngressTunnelReversionTimeoutCIENA-CES-MPLS-MIB