CIENA-CES-MPLS-MIB :: cienaCesMplsGlobalStaticAdminVcLabelRangeStart

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCIENA-CES-MPLS-MIBcienaCesMplsGlobalStaticAdminVcLabelRangeStart

cienaCesMplsGlobalStaticAdminVcLabelRangeStart

Module: CIENA-CES-MPLS-MIB

OID (symbolic): CIENA-CES-MPLS-MIB::cienaCesMplsGlobalStaticAdminVcLabelRangeStart

OID (numeric): 1.3.6.1.4.1.1271.2.1.18.1.3.1.13

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: The beginning of the static VC administrative label range. There cannot be any overlap between static and dynamic label ranges. Setting this object does not become effective until the device is rebooted.

What is cienaCesMplsGlobalStaticAdminVcLabelRangeStart?

This is the administratively configured lower boundary of the label range set aside specifically for statically provisioned VCs (virtual circuits/pseudowires), a separate sub-pool from the static tunnel range, and a change here similarly requires a reboot to take effect. This lets network operators size the static pseudowire label pool independently of the static tunnel pool, which matters on a device carrying a large number of manually configured Layer 2 pseudowires. If pseudowire provisioning is being throttled by label exhaustion while tunnel labels are plentiful, this is the specific boundary to widen.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.1.18.1.3.1.13
snmpwalk -v2c -c public <target> CIENA-CES-MPLS-MIB::cienaCesMplsGlobalStaticAdminVcLabelRangeStart

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.1.18.1.3.1.13.1
snmpget -v2c -c public <target> CIENA-CES-MPLS-MIB::cienaCesMplsGlobalStaticAdminVcLabelRangeStart.1

Start monitoring Ciena Carrier Ethernet switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-MPLS-MIB::cienaCesMplsGlobalStaticAdminVcLabelRangeStart OID value, configure state conditions and alerts, and monitor any Ciena Carrier Ethernet switches from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1271cienaCIENA-SMI
1.3.6.1.4.1.1271.2cienaCesCIENA-SMI
1.3.6.1.4.1.1271.2.1cienaCesConfigCIENA-SMI
Numeric OIDNameModule
1.3.6.1.4.1.1271.2.1.18cienaCesMplsMIBCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1cienaCesMplsMIBObjectsCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1.3cienaCesMplsGlobalCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1.3.1cienaCesMplsAttrsCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1.3.1.13cienaCesMplsGlobalStaticAdminVcLabelRangeStartCIENA-CES-MPLS-MIB