All MIBs › CIENA-CES-MPLS-MIB › cienaCesMplsDynamicIngressTunnelReversionTimeout
cienaCesMplsDynamicIngressTunnelReversionTimeout
Module: CIENA-CES-MPLS-MIB
OID (symbolic): CIENA-CES-MPLS-MIB::cienaCesMplsDynamicIngressTunnelReversionTimeout
OID (numeric): 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.25
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object represents the tunnel reversion hold time in seconds before the primary encap tunnel switches back as active tunnel in its tunnel group.
What is cienaCesMplsDynamicIngressTunnelReversionTimeout?
This object sets the hold time, in seconds, that the primary dynamic tunnel must remain healthy before traffic reverts back to it, mirroring the static tunnel's reversion timeout, as the description states. This hold timer specifically guards against reverting to a primary LSP that just barely resignaled and might still be unstable while its recomputed path fully converges, rather than one that failed for a purely momentary reason. For example, a 300-second reversion timeout requires the resignaled primary tunnel to stay continuously up for five full minutes before traffic is allowed to switch back to it.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.25 snmpwalk -v2c -c public <target> CIENA-CES-MPLS-MIB::cienaCesMplsDynamicIngressTunnelReversionTimeout
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.25.1 snmpget -v2c -c public <target> CIENA-CES-MPLS-MIB::cienaCesMplsDynamicIngressTunnelReversionTimeout.1
Start monitoring Ciena Carrier Ethernet switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-MPLS-MIB::cienaCesMplsDynamicIngressTunnelReversionTimeout OID value, configure state conditions and alerts, and monitor any Ciena Carrier Ethernet switches from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1271 | ciena | CIENA-SMI |
| 1.3.6.1.4.1.1271.2 | cienaCes | CIENA-SMI |
| 1.3.6.1.4.1.1271.2.1 | cienaCesConfig | CIENA-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1271.2.1.18 | cienaCesMplsMIB | CIENA-CES-MPLS-MIB |
| 1.3.6.1.4.1.1271.2.1.18.1 | cienaCesMplsMIBObjects | CIENA-CES-MPLS-MIB |
| 1.3.6.1.4.1.1271.2.1.18.1.1 | cienaCesMpls | CIENA-CES-MPLS-MIB |
| 1.3.6.1.4.1.1271.2.1.18.1.1.3 | cienaCesMplsDynamicIngressTunnelTable | CIENA-CES-MPLS-MIB |
| 1.3.6.1.4.1.1271.2.1.18.1.1.3.1 | cienaCesMplsDynamicIngressTunnelEntry | CIENA-CES-MPLS-MIB |
| 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.25 | cienaCesMplsDynamicIngressTunnelReversionTimeout | CIENA-CES-MPLS-MIB |