CIENA-CES-MPLS-MIB :: cienaCesMplsDynamicIngressTunnelDestIpAddr

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCIENA-CES-MPLS-MIBcienaCesMplsDynamicIngressTunnelDestIpAddr

cienaCesMplsDynamicIngressTunnelDestIpAddr

Module: CIENA-CES-MPLS-MIB

OID (symbolic): CIENA-CES-MPLS-MIB::cienaCesMplsDynamicIngressTunnelDestIpAddr

OID (numeric): 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.8

Node type: OBJECT-TYPE

Type: IpAddress

Access: read-only

Description: Destination IP address of the dynamic encap tunnel. If not specified, the dynamic encap tunnel inherits the IP address of the tunnel group. This object cannot be modified once the dynamic encap tunnel entry is created.

What is cienaCesMplsDynamicIngressTunnelDestIpAddr?

This object specifies the destination IP address of the dynamic encap tunnel, inheriting the tunnel group's address if unset and, like the static tunnel version, unable to be modified once the entry is created, as the description states. This immutability means correcting a wrong destination on a dynamic tunnel entry requires deleting and recreating it rather than editing the field in place, a detail worth knowing before scripting automated dynamic tunnel provisioning. For example, a destination of 10.0.88.1 identifying a specific far-end PE loopback would require a full tunnel recreation to fix if entered incorrectly.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.8
snmpwalk -v2c -c public <target> CIENA-CES-MPLS-MIB::cienaCesMplsDynamicIngressTunnelDestIpAddr

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.8.1
snmpget -v2c -c public <target> CIENA-CES-MPLS-MIB::cienaCesMplsDynamicIngressTunnelDestIpAddr.1

Start monitoring Ciena Carrier Ethernet switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-MPLS-MIB::cienaCesMplsDynamicIngressTunnelDestIpAddr OID value, configure state conditions and alerts, and monitor any Ciena Carrier Ethernet switches from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1271cienaCIENA-SMI
1.3.6.1.4.1.1271.2cienaCesCIENA-SMI
1.3.6.1.4.1.1271.2.1cienaCesConfigCIENA-SMI
Numeric OIDNameModule
1.3.6.1.4.1.1271.2.1.18cienaCesMplsMIBCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1cienaCesMplsMIBObjectsCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1.1cienaCesMplsCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1.1.3cienaCesMplsDynamicIngressTunnelTableCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1.1.3.1cienaCesMplsDynamicIngressTunnelEntryCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.8cienaCesMplsDynamicIngressTunnelDestIpAddrCIENA-CES-MPLS-MIB