CIENA-CES-MPLS-MIB :: cienaCesGmplsStaticIngressCoroutedTunnelSrcIpAddr

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCIENA-CES-MPLS-MIBcienaCesGmplsStaticIngressCoroutedTunnelSrcIpAddr

cienaCesGmplsStaticIngressCoroutedTunnelSrcIpAddr

Module: CIENA-CES-MPLS-MIB

OID (symbolic): CIENA-CES-MPLS-MIB::cienaCesGmplsStaticIngressCoroutedTunnelSrcIpAddr

OID (numeric): 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.4

Node type: OBJECT-TYPE

Type: IpAddress

Access: read-only

Description: Source IP address of the static encap tunnel. If not specified, the static encap tunnel inherits the IP address of the tunnel-group. This object cannot be modified once the static encap tunnel entry is created.

What is cienaCesGmplsStaticIngressCoroutedTunnelSrcIpAddr?

This is the source IP address of this static co-routed tunnel, inheriting the tunnel-group's address if left unspecified, and immutable once the tunnel entry is created, same as on the unidirectional static tunnel. An admin treats getting this right at creation time as critical precisely because this tunnel type carries both directions of traffic, so a wrong or unexpectedly-inherited source affects the whole bidirectional service rather than a single leg. For example, this field showing no explicit value but the tunnel actually forwarding with the tunnel-group's address of 10.90.0.1 means both forward and return traffic are using that inherited source.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.4
snmpwalk -v2c -c public <target> CIENA-CES-MPLS-MIB::cienaCesGmplsStaticIngressCoroutedTunnelSrcIpAddr

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.4.1
snmpget -v2c -c public <target> CIENA-CES-MPLS-MIB::cienaCesGmplsStaticIngressCoroutedTunnelSrcIpAddr.1

Start monitoring Ciena Carrier Ethernet switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-MPLS-MIB::cienaCesGmplsStaticIngressCoroutedTunnelSrcIpAddr OID value, configure state conditions and alerts, and monitor any Ciena Carrier Ethernet switches from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1271cienaCIENA-SMI
1.3.6.1.4.1.1271.2cienaCesCIENA-SMI
1.3.6.1.4.1.1271.2.1cienaCesConfigCIENA-SMI
Numeric OIDNameModule
1.3.6.1.4.1.1271.2.1.18cienaCesMplsMIBCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1cienaCesMplsMIBObjectsCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1.2cienaCesGmplsCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1.2.2cienaCesGmplsStaticIngressCoroutedTunnelTableCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1.2.2.1cienaCesGmplsStaticIngressCoroutedTunnelEntryCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1.2.2.1.4cienaCesGmplsStaticIngressCoroutedTunnelSrcIpAddrCIENA-CES-MPLS-MIB