CIENA-CES-MPLS-MIB :: cienaCesGmplsStaticEgressCoroutedTunnelProtectionState

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCIENA-CES-MPLS-MIBcienaCesGmplsStaticEgressCoroutedTunnelProtectionState

cienaCesGmplsStaticEgressCoroutedTunnelProtectionState

Module: CIENA-CES-MPLS-MIB

OID (symbolic): CIENA-CES-MPLS-MIB::cienaCesGmplsStaticEgressCoroutedTunnelProtectionState

OID (numeric): 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.12

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Specifies the Protection status of the static encap tunnel.

What is cienaCesGmplsStaticEgressCoroutedTunnelProtectionState?

This indicates whether this tunnel is currently the active (traffic-carrying) member of its protection pair or sitting in standby. This is the field to check to know, right now, which of a primary/backup pair is actually forwarding traffic — the ProtectionRole object tells you the design intent, but this one tells you the live state, and after a failover the two can legitimately disagree (a backup tunnel with role backup(2) can show state active(1)). Right after a link failure, tunnel 'MIA-HOU-LSP-02' — normally standby — might flip to active(1) as it takes over traffic from its failed primary partner.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.12
snmpwalk -v2c -c public <target> CIENA-CES-MPLS-MIB::cienaCesGmplsStaticEgressCoroutedTunnelProtectionState

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.12.1
snmpget -v2c -c public <target> CIENA-CES-MPLS-MIB::cienaCesGmplsStaticEgressCoroutedTunnelProtectionState.1

Start monitoring Ciena Carrier Ethernet switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-MPLS-MIB::cienaCesGmplsStaticEgressCoroutedTunnelProtectionState OID value, configure state conditions and alerts, and monitor any Ciena Carrier Ethernet switches from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1271cienaCIENA-SMI
1.3.6.1.4.1.1271.2cienaCesCIENA-SMI
1.3.6.1.4.1.1271.2.1cienaCesConfigCIENA-SMI
Numeric OIDNameModule
1.3.6.1.4.1.1271.2.1.18cienaCesMplsMIBCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1cienaCesMplsMIBObjectsCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1.2cienaCesGmplsCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1.2.6cienaCesGmplsStaticEgressCoroutedTunnelTableCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1.2.6.1cienaCesGmplsStaticEgressCoroutedTunnelEntryCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1.2.6.1.12cienaCesGmplsStaticEgressCoroutedTunnelProtectionStateCIENA-CES-MPLS-MIB