All MIBs › CIENA-CES-MPLS-MIB › cienaCesGmplsDynamicTransitCoroutedTunnelReverseOutgoingBytes
cienaCesGmplsDynamicTransitCoroutedTunnelReverseOutgoingBytes
Module: CIENA-CES-MPLS-MIB
OID (symbolic): CIENA-CES-MPLS-MIB::cienaCesGmplsDynamicTransitCoroutedTunnelReverseOutgoingBytes
OID (numeric): 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.22
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: The number of reverse outgoing bytes for the given transit tunnel. This object is supported only on specific platforms.
What is cienaCesGmplsDynamicTransitCoroutedTunnelReverseOutgoingBytes?
This is a running byte count of reverse-direction traffic this node has forwarded onward for this transit tunnel, available only on certain platforms per its description. Because this counts bytes rather than packets, it's the number to use for bandwidth utilization graphs against this tunnel's reserved or requested bandwidth, whereas the packet counters are more useful for spotting small-packet-heavy traffic patterns like control-plane storms. Over a 5-minute polling interval, this might increase by around 199,506,606 bytes, letting a monitoring tool graph this tunnel's outbound bit rate.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.22 snmpwalk -v2c -c public <target> CIENA-CES-MPLS-MIB::cienaCesGmplsDynamicTransitCoroutedTunnelReverseOutgoingBytes
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.22.1 snmpget -v2c -c public <target> CIENA-CES-MPLS-MIB::cienaCesGmplsDynamicTransitCoroutedTunnelReverseOutgoingBytes.1
Start monitoring Ciena Carrier Ethernet switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-MPLS-MIB::cienaCesGmplsDynamicTransitCoroutedTunnelReverseOutgoingBytes OID value, configure state conditions and alerts, and monitor any Ciena Carrier Ethernet switches from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1271 | ciena | CIENA-SMI |
| 1.3.6.1.4.1.1271.2 | cienaCes | CIENA-SMI |
| 1.3.6.1.4.1.1271.2.1 | cienaCesConfig | CIENA-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1271.2.1.18 | cienaCesMplsMIB | CIENA-CES-MPLS-MIB |
| 1.3.6.1.4.1.1271.2.1.18.1 | cienaCesMplsMIBObjects | CIENA-CES-MPLS-MIB |
| 1.3.6.1.4.1.1271.2.1.18.1.2 | cienaCesGmpls | CIENA-CES-MPLS-MIB |
| 1.3.6.1.4.1.1271.2.1.18.1.2.12 | cienaCesGmplsDynamicTransitCoroutedTunnelTable | CIENA-CES-MPLS-MIB |
| 1.3.6.1.4.1.1271.2.1.18.1.2.12.1 | cienaCesGmplsDynamicTransitCoroutedTunnelEntry | CIENA-CES-MPLS-MIB |
| 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.22 | cienaCesGmplsDynamicTransitCoroutedTunnelReverseOutgoingBytes | CIENA-CES-MPLS-MIB |