All MIBs › CIENA-CES-MPLS-MIB › cienaCesGmplsDynamicTransitCoroutedTunnelReverseIncomingBytes
cienaCesGmplsDynamicTransitCoroutedTunnelReverseIncomingBytes
Module: CIENA-CES-MPLS-MIB
OID (symbolic): CIENA-CES-MPLS-MIB::cienaCesGmplsDynamicTransitCoroutedTunnelReverseIncomingBytes
OID (numeric): 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.21
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: The number of reverse incoming bytes for the given transit tunnel. This object is supported only on specific platforms.
What is cienaCesGmplsDynamicTransitCoroutedTunnelReverseIncomingBytes?
This is a running byte count of reverse-direction traffic that has entered this transit tunnel at this node, available only on certain platforms per its description. Dividing the delta between two polls of this byte counter by the polling interval gives you the tunnel's actual throughput in bits per second at this hop, which is the figure you'd want when deciding whether this LSP is approaching its reserved bandwidth. Polled a minute apart, this counter might climb by roughly 341,466,572 bytes, translating to a throughput estimate for capacity planning.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.21 snmpwalk -v2c -c public <target> CIENA-CES-MPLS-MIB::cienaCesGmplsDynamicTransitCoroutedTunnelReverseIncomingBytes
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.21.1 snmpget -v2c -c public <target> CIENA-CES-MPLS-MIB::cienaCesGmplsDynamicTransitCoroutedTunnelReverseIncomingBytes.1
Start monitoring Ciena Carrier Ethernet switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-MPLS-MIB::cienaCesGmplsDynamicTransitCoroutedTunnelReverseIncomingBytes OID value, configure state conditions and alerts, and monitor any Ciena Carrier Ethernet switches from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1271 | ciena | CIENA-SMI |
| 1.3.6.1.4.1.1271.2 | cienaCes | CIENA-SMI |
| 1.3.6.1.4.1.1271.2.1 | cienaCesConfig | CIENA-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1271.2.1.18 | cienaCesMplsMIB | CIENA-CES-MPLS-MIB |
| 1.3.6.1.4.1.1271.2.1.18.1 | cienaCesMplsMIBObjects | CIENA-CES-MPLS-MIB |
| 1.3.6.1.4.1.1271.2.1.18.1.2 | cienaCesGmpls | CIENA-CES-MPLS-MIB |
| 1.3.6.1.4.1.1271.2.1.18.1.2.12 | cienaCesGmplsDynamicTransitCoroutedTunnelTable | CIENA-CES-MPLS-MIB |
| 1.3.6.1.4.1.1271.2.1.18.1.2.12.1 | cienaCesGmplsDynamicTransitCoroutedTunnelEntry | CIENA-CES-MPLS-MIB |
| 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.21 | cienaCesGmplsDynamicTransitCoroutedTunnelReverseIncomingBytes | CIENA-CES-MPLS-MIB |