CIENA-CES-MPLS-MIB :: cienaCesGmplsDynamicIngressUniDirTunnelNextHopIp

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCIENA-CES-MPLS-MIBcienaCesGmplsDynamicIngressUniDirTunnelNextHopIp

cienaCesGmplsDynamicIngressUniDirTunnelNextHopIp

Module: CIENA-CES-MPLS-MIB

OID (symbolic): CIENA-CES-MPLS-MIB::cienaCesGmplsDynamicIngressUniDirTunnelNextHopIp

OID (numeric): 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.4

Node type: OBJECT-TYPE

Type: IpAddress

Access: read-only

Description: Specifies the next hop IP address for the Dynamic encap tunnel.

What is cienaCesGmplsDynamicIngressUniDirTunnelNextHopIp?

This is the next-hop IP address this RSVP-TE-signaled one-directional tunnel is currently using, computed dynamically by the signaling protocol's path selection rather than fixed by the operator. An admin compares this live value against the tunnel's configured constraints (bandwidth, affinity, explicit path) to confirm the signaled path matches expectations, since unlike a static tunnel this value can legitimately change on its own after a re-signal. For example, this next hop shifting from 172.16.30.1 to 172.16.30.5 between two polls, with no admin action taken, indicates the tunnel automatically re-signaled over an alternate path.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.4
snmpwalk -v2c -c public <target> CIENA-CES-MPLS-MIB::cienaCesGmplsDynamicIngressUniDirTunnelNextHopIp

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.4.1
snmpget -v2c -c public <target> CIENA-CES-MPLS-MIB::cienaCesGmplsDynamicIngressUniDirTunnelNextHopIp.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cienaCesGmplsDynamicIngressUniDirTunnelNextHopIp.1

Start monitoring Ciena Carrier Ethernet switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-MPLS-MIB::cienaCesGmplsDynamicIngressUniDirTunnelNextHopIp OID value, configure state conditions and alerts, and monitor any Ciena Carrier Ethernet switches from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1271cienaCIENA-SMI
1.3.6.1.4.1.1271.2cienaCesCIENA-SMI
1.3.6.1.4.1.1271.2.1cienaCesConfigCIENA-SMI
Numeric OIDNameModule
1.3.6.1.4.1.1271.2.1.18cienaCesMplsMIBCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1cienaCesMplsMIBObjectsCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1.2cienaCesGmplsCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1.2.3cienaCesGmplsDynamicIngressUniDirTunnelTableCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1.2.3.1cienaCesGmplsDynamicIngressUniDirTunnelEntryCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1.2.3.1.4cienaCesGmplsDynamicIngressUniDirTunnelNextHopIpCIENA-CES-MPLS-MIB