CIENA-CES-MPLS-MIB :: cienaCesGmplsDynamicIngressUniDirTunnelDestIpAddr

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCIENA-CES-MPLS-MIBcienaCesGmplsDynamicIngressUniDirTunnelDestIpAddr

cienaCesGmplsDynamicIngressUniDirTunnelDestIpAddr

Module: CIENA-CES-MPLS-MIB

OID (symbolic): CIENA-CES-MPLS-MIB::cienaCesGmplsDynamicIngressUniDirTunnelDestIpAddr

OID (numeric): 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.6

Node type: OBJECT-TYPE

Type: IpAddress

Access: read-only

Description: Destination IP address of the Dynamic encap tunnel. If not specified, the Dynamic encap tunnel inherits the IP address of the tunnel-group. This object cannot be modified once the Dynamic encap tunnel entry is created.

What is cienaCesGmplsDynamicIngressUniDirTunnelDestIpAddr?

This is the destination IP address this dynamically-signaled tunnel targets, inheriting the tunnel-group's address if unspecified and immutable once the tunnel is created, even as RSVP-TE may vary the actual path taken to reach it. An admin relies on this value staying fixed as the one constant anchor point of an otherwise path-flexible LSP. For example, this destination staying at 10.100.0.9 across multiple re-signaling events confirms the tunnel always converges back on the same intended remote endpoint despite taking different paths to get there.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.6
snmpwalk -v2c -c public <target> CIENA-CES-MPLS-MIB::cienaCesGmplsDynamicIngressUniDirTunnelDestIpAddr

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.6.1
snmpget -v2c -c public <target> CIENA-CES-MPLS-MIB::cienaCesGmplsDynamicIngressUniDirTunnelDestIpAddr.1

Start monitoring Ciena Carrier Ethernet switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-MPLS-MIB::cienaCesGmplsDynamicIngressUniDirTunnelDestIpAddr OID value, configure state conditions and alerts, and monitor any Ciena Carrier Ethernet switches from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1271cienaCIENA-SMI
1.3.6.1.4.1.1271.2cienaCesCIENA-SMI
1.3.6.1.4.1.1271.2.1cienaCesConfigCIENA-SMI
Numeric OIDNameModule
1.3.6.1.4.1.1271.2.1.18cienaCesMplsMIBCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1cienaCesMplsMIBObjectsCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1.2cienaCesGmplsCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1.2.3cienaCesGmplsDynamicIngressUniDirTunnelTableCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1.2.3.1cienaCesGmplsDynamicIngressUniDirTunnelEntryCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1.2.3.1.6cienaCesGmplsDynamicIngressUniDirTunnelDestIpAddrCIENA-CES-MPLS-MIB