CIENA-CES-MPLS-MIB :: cienaCesGmplsDynamicIngressUniDirTunnelBandwidthProfile

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCIENA-CES-MPLS-MIBcienaCesGmplsDynamicIngressUniDirTunnelBandwidthProfile

cienaCesGmplsDynamicIngressUniDirTunnelBandwidthProfile

Module: CIENA-CES-MPLS-MIB

OID (symbolic): CIENA-CES-MPLS-MIB::cienaCesGmplsDynamicIngressUniDirTunnelBandwidthProfile

OID (numeric): 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.26

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-only

Description: This object represents the bandwidth profile attached to this tunnel.

What is cienaCesGmplsDynamicIngressUniDirTunnelBandwidthProfile?

This names the bandwidth profile attached to this dynamic tunnel, the traffic-shaping/policing template governing how much bandwidth this LSP is entitled to request and enforce during RSVP-TE signaling. An admin checks this to confirm the tunnel is signaling with the bandwidth reservation the service actually requires, since an undersized profile here would cause the tunnel to under-request bandwidth and risk congestion under real traffic load. For example, a bandwidth profile named 500mbps-cir attached here confirms this tunnel is signaling for a 500 Mbps committed rate, which an admin would check against the tunnel's actual traffic volume if congestion is suspected.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.26
snmpwalk -v2c -c public <target> CIENA-CES-MPLS-MIB::cienaCesGmplsDynamicIngressUniDirTunnelBandwidthProfile

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.26.1
snmpget -v2c -c public <target> CIENA-CES-MPLS-MIB::cienaCesGmplsDynamicIngressUniDirTunnelBandwidthProfile.1

Start monitoring Ciena Carrier Ethernet switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-MPLS-MIB::cienaCesGmplsDynamicIngressUniDirTunnelBandwidthProfile OID value, configure state conditions and alerts, and monitor any Ciena Carrier Ethernet switches from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1271cienaCIENA-SMI
1.3.6.1.4.1.1271.2cienaCesCIENA-SMI
1.3.6.1.4.1.1271.2.1cienaCesConfigCIENA-SMI
Numeric OIDNameModule
1.3.6.1.4.1.1271.2.1.18cienaCesMplsMIBCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1cienaCesMplsMIBObjectsCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1.2cienaCesGmplsCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1.2.3cienaCesGmplsDynamicIngressUniDirTunnelTableCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1.2.3.1cienaCesGmplsDynamicIngressUniDirTunnelEntryCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1.2.3.1.26cienaCesGmplsDynamicIngressUniDirTunnelBandwidthProfileCIENA-CES-MPLS-MIB