CIENA-CES-MPLS-MIB :: cienaCesGmplsDynamicIngressCoroutedTunnelSetupPriority

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCIENA-CES-MPLS-MIBcienaCesGmplsDynamicIngressCoroutedTunnelSetupPriority

cienaCesGmplsDynamicIngressCoroutedTunnelSetupPriority

Module: CIENA-CES-MPLS-MIB

OID (symbolic): CIENA-CES-MPLS-MIB::cienaCesGmplsDynamicIngressCoroutedTunnelSetupPriority

OID (numeric): 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.22

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: Indicates the set up priority of the dynamic encap tunnel.

What is cienaCesGmplsDynamicIngressCoroutedTunnelSetupPriority?

This is the setup priority (0-7) this dynamic co-routed tunnel uses when signaling for bandwidth against competing LSPs, following the same RSVP-TE preemption rules as the unidirectional tunnel type but for a bidirectional reservation. An admin sets this low (numerically) for a business-critical bidirectional circuit so it can preempt a lower-priority LSP occupying bandwidth on a congested shared link during signaling. For example, a setup priority of 1 lets this voice-trunk circuit bump a lower-priority best-effort LSP off a saturated core link when it needs to signal.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.22
snmpwalk -v2c -c public <target> CIENA-CES-MPLS-MIB::cienaCesGmplsDynamicIngressCoroutedTunnelSetupPriority

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.22.1
snmpget -v2c -c public <target> CIENA-CES-MPLS-MIB::cienaCesGmplsDynamicIngressCoroutedTunnelSetupPriority.1

Start monitoring Ciena Carrier Ethernet switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-MPLS-MIB::cienaCesGmplsDynamicIngressCoroutedTunnelSetupPriority OID value, configure state conditions and alerts, and monitor any Ciena Carrier Ethernet switches from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1271cienaCIENA-SMI
1.3.6.1.4.1.1271.2cienaCesCIENA-SMI
1.3.6.1.4.1.1271.2.1cienaCesConfigCIENA-SMI
Numeric OIDNameModule
1.3.6.1.4.1.1271.2.1.18cienaCesMplsMIBCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1cienaCesMplsMIBObjectsCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1.2cienaCesGmplsCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1.2.4cienaCesGmplsDynamicIngressCoroutedTunnelTableCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1.2.4.1cienaCesGmplsDynamicIngressCoroutedTunnelEntryCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.22cienaCesGmplsDynamicIngressCoroutedTunnelSetupPriorityCIENA-CES-MPLS-MIB