All MIBs › CIENA-CES-MPLS-MIB › cienaCesGmplsDynamicIngressCoroutedTunnelLspReOptTimeInterval
cienaCesGmplsDynamicIngressCoroutedTunnelLspReOptTimeInterval
Module: CIENA-CES-MPLS-MIB
OID (symbolic): CIENA-CES-MPLS-MIB::cienaCesGmplsDynamicIngressCoroutedTunnelLspReOptTimeInterval
OID (numeric): 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.35
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: Indicates Lsp-Reoptimization Time interval(in minutes) for this tunnel and always remains 0 in case of backup tunnel.
What is cienaCesGmplsDynamicIngressCoroutedTunnelLspReOptTimeInterval?
This is the interval, in minutes (5-60), at which this tunnel checks for a better path and re-optimizes if LSP re-optimization is enabled, and per the description always reads 0 on a backup-role tunnel since re-optimization applies only to the active/primary LSP. An admin tunes this interval to balance responsiveness to topology improvements against the overhead and small disruption risk of frequent re-signaling checks. For example, a re-optimization interval of 30 minutes means this tunnel evaluates for a better path twice an hour, versus a 5-minute interval that would check twelve times as often.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.35 snmpwalk -v2c -c public <target> CIENA-CES-MPLS-MIB::cienaCesGmplsDynamicIngressCoroutedTunnelLspReOptTimeInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.35.1 snmpget -v2c -c public <target> CIENA-CES-MPLS-MIB::cienaCesGmplsDynamicIngressCoroutedTunnelLspReOptTimeInterval.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cienaCesGmplsDynamicIngressCoroutedTunnelLspReOptTimeInterval.1
Start monitoring Ciena Carrier Ethernet switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-MPLS-MIB::cienaCesGmplsDynamicIngressCoroutedTunnelLspReOptTimeInterval OID value, configure state conditions and alerts, and monitor any Ciena Carrier Ethernet switches from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1271 | ciena | CIENA-SMI |
| 1.3.6.1.4.1.1271.2 | cienaCes | CIENA-SMI |
| 1.3.6.1.4.1.1271.2.1 | cienaCesConfig | CIENA-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1271.2.1.18 | cienaCesMplsMIB | CIENA-CES-MPLS-MIB |
| 1.3.6.1.4.1.1271.2.1.18.1 | cienaCesMplsMIBObjects | CIENA-CES-MPLS-MIB |
| 1.3.6.1.4.1.1271.2.1.18.1.2 | cienaCesGmpls | CIENA-CES-MPLS-MIB |
| 1.3.6.1.4.1.1271.2.1.18.1.2.4 | cienaCesGmplsDynamicIngressCoroutedTunnelTable | CIENA-CES-MPLS-MIB |
| 1.3.6.1.4.1.1271.2.1.18.1.2.4.1 | cienaCesGmplsDynamicIngressCoroutedTunnelEntry | CIENA-CES-MPLS-MIB |
| 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.35 | cienaCesGmplsDynamicIngressCoroutedTunnelLspReOptTimeInterval | CIENA-CES-MPLS-MIB |