CIENA-CES-MPLS-MIB :: cienaCesGmplsDynamicEgressCoroutedTunnelReversionTimeout

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCIENA-CES-MPLS-MIBcienaCesGmplsDynamicEgressCoroutedTunnelReversionTimeout

cienaCesGmplsDynamicEgressCoroutedTunnelReversionTimeout

Module: CIENA-CES-MPLS-MIB

OID (symbolic): CIENA-CES-MPLS-MIB::cienaCesGmplsDynamicEgressCoroutedTunnelReversionTimeout

OID (numeric): 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.16

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: This object represents the tunnel reversion hold time in seconds before the primary encap tunnel switches back as active tunnel in its tunnel group.

What is cienaCesGmplsDynamicEgressCoroutedTunnelReversionTimeout?

This is the hold time, in seconds, that the primary tunnel must remain stable before traffic reverts back to it from backup. This delay exists specifically to prevent flapping — if the primary path is intermittently failing, switching back the instant it appears to recover would just cause traffic to bounce back and forth, so this timer makes the device wait out a stable window first. With this set to 412 seconds, tunnel 'BOS-DC-PRI-01' would only revert to its primary path after that many seconds of continuous stability.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.16
snmpwalk -v2c -c public <target> CIENA-CES-MPLS-MIB::cienaCesGmplsDynamicEgressCoroutedTunnelReversionTimeout

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.16.1
snmpget -v2c -c public <target> CIENA-CES-MPLS-MIB::cienaCesGmplsDynamicEgressCoroutedTunnelReversionTimeout.1

Start monitoring Ciena Carrier Ethernet switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-MPLS-MIB::cienaCesGmplsDynamicEgressCoroutedTunnelReversionTimeout OID value, configure state conditions and alerts, and monitor any Ciena Carrier Ethernet switches from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1271cienaCIENA-SMI
1.3.6.1.4.1.1271.2cienaCesCIENA-SMI
1.3.6.1.4.1.1271.2.1cienaCesConfigCIENA-SMI
Numeric OIDNameModule
1.3.6.1.4.1.1271.2.1.18cienaCesMplsMIBCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1cienaCesMplsMIBObjectsCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1.2cienaCesGmplsCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1.2.8cienaCesGmplsDynamicEgressCoroutedTunnelTableCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1.2.8.1cienaCesGmplsDynamicEgressCoroutedTunnelEntryCIENA-CES-MPLS-MIB
1.3.6.1.4.1.1271.2.1.18.1.2.8.1.16cienaCesGmplsDynamicEgressCoroutedTunnelReversionTimeoutCIENA-CES-MPLS-MIB