CFG-PLCY-MIB

All MIBs › CFG-PLCY-MIB

Organization: Sitara, Incorporated

Last Updated: 2002-03-06

Category: Device Management

Description: Manages configuration policy definitions and their application to network devices for automated configuration management.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CFG-PLCY-MIB?

CFG-PLCY-MIB is Sitara Networks' proprietary SNMP module for the QosWorks/QosArray bandwidth management and QoS policy appliances, covering configuration-policy management. It exposes objects describing the policy configuration subsystem itself -- versioning, storage mode, last update timestamps, per-row update behavior, and cross-reference alias tables linking scheduler, link, group, CBQ (Class-Based Queuing) class, and filter policy elements. Rather than traffic or hardware counters, its principal monitoring value is around configuration/software health: sitaraCfgPlcyVersion and sitaraCfgPlcyLastUpdateTime let an administrator confirm which policy configuration is loaded and when it last changed, while sitaraCfgPlcyApplyError surfaces failures when a policy push/apply operation did not succeed, indicating a configuration or software fault on the device. It is a self-contained enterprise MIB with no explicit dependency noted on other standard MIBs beyond Sitara's own enterprise tree. It would be deployed on enterprise/ISP WAN links where Sitara QosWorks/QosArray appliances enforce bandwidth and QoS policies, with this MIB used to verify policy changes applied cleanly. Engineers can download the CFG-PLCY-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CFG-PLCY-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Sitara Networks QosWorks/QosArray bandwidth management appliances

Monitoring Examples

An administrator would poll sitaraCfgPlcyApplyError after a policy push to confirm the new QoS configuration applied without error, and check sitaraCfgPlcyLastUpdateTime to verify the change took effect; the sitaraCfgPlcyCrossIndexTable/sitaraCfgPlcyCrossIndexTableEntry and its alias objects (sitaraCfgPlcyCrossSchdAlias, sitaraCfgPlcyCrossLinkAlias, sitaraCfgPlcyCrossGroupAlias, sitaraCfgPlcyCrossCbqClassAlias, sitaraCfgPlcyCrossFilterAlias) would be inspected to confirm scheduler, link, group, CBQ class, and filter policy objects are correctly cross-referenced by name.

What Can Be Monitored

policy configuration version
last policy update time
policy apply errors
policy cross-reference aliases (scheduler/link/group/CBQ class/filter)
per-row update mode

Imported Objects

From RFC1155-SMI

IpAddress
enterprises

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Gauge32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
RowStatus
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
sitara	1.3.6.1.4.1.2302
sitaraCfg	1.3.6.1.4.1.2302.1
sitaraCfgPlcy	1.3.6.1.4.1.2302.1.1
sitaraCfgPlcyAction	1.3.6.1.4.1.2302.1.1.7
STR sitaraCfgPlcyApplyError	1.3.6.1.4.1.2302.1.1.2.5	PolicyDisplayString	read-only	sitaraCfgPlcyApplyError object stores the message generated when sitaraCfgPlcyGlobalStorage is set to policy load/verify. If policy load is success then Message is Policy Apply SUCCESSFUL. If policy verify is success then Message is Policy Verify SUCCESSFUL. Message is trunkated to 1024 charecters
sitaraCfgPlcyCbqClass	1.3.6.1.4.1.2302.1.1.7.1.1
POL sitaraCfgPlcyCbqClassAlias	1.3.6.1.4.1.2302.1.1.7.1.1.2.1.2	PolicyAlias	read-create	The class Alias is unique identifier in the Class Table, for a schedule. See the textual convention information at the beginning of this module for PolicyAlias and PolicyPathName for correct usage information.
TRA sitaraCfgPlcyCbqClassDirection	1.3.6.1.4.1.2302.1.1.7.1.1.2.1.27	TrafficDirection	read-create	Cbq Class Traffic direction. Note that the value of this object will determine whether the LAN, WAN or both sets of objects for LAN and WAN parameters are relevant for this class of traffic.
STR sitaraCfgPlcyCbqClassDscr	1.3.6.1.4.1.2302.1.1.7.1.1.2.1.29	PolicyDisplayString	read-create	A textual description for this class.
INT sitaraCfgPlcyCbqClassEnabled	1.3.6.1.4.1.2302.1.1.7.1.1.2.1.4	INTEGER	read-create	The current status of this policy element.
sitaraCfgPlcyCbqClassEntry	1.3.6.1.4.1.2302.1.1.7.1.1.2.1		not-accessible	Locally held information about a particular CBQ policy.
U32 sitaraCfgPlcyCbqClassIndex	1.3.6.1.4.1.2302.1.1.7.1.1.2.1.1	Unsigned32	not-accessible	A unique value for each CbqClass Entry. A new index value will be used each time a CbqClass is associated with a Link/Group creating a new row in this table . The sitaraCfgPlcyCbqClassNextIndex is the object to be used to determine what the next available CbqClass Index should be.
ADM sitaraCfgPlcyCbqClassLanAdminCtrl	1.3.6.1.4.1.2302.1.1.7.1.1.2.1.9	AdmissionState	read-create	Describes the admission rule for a session. The purpose of this object is to allow the system to determine the action to take when new requests are recieved by the system for sessions when the allocated limit for this class has been reached. Depending on the value of this object, new requests can be granted with reduced bandwith, rejected, etc. See the AdmissionState textual convention for more information.
G32 sitaraCfgPlcyCbqClassLanBandWidth	1.3.6.1.4.1.2302.1.1.7.1.1.2.1.5	Gauge32	read-create	Class bandwidth in LAN direction. This object should be set to less than the parent available bandwidth.
G32 sitaraCfgPlcyCbqClassLanBurst	1.3.6.1.4.1.2302.1.1.7.1.1.2.1.6	Gauge32	read-create	Class burst bandwidth in LAN direction. This should be less than the parent link or group's available burst bandwidth.
INT sitaraCfgPlcyCbqClassLanHttpCaching	1.3.6.1.4.1.2302.1.1.7.1.1.2.1.10	INTEGER	read-create	sitaraCfgPlcyCbqClassLanHttpCaching gives the status whether HTTP caching i.e. enabled or not in the LAN direction. This class-level attribute applies only for HTTP traffic. It enables caching WEB pages that are handeled by the class.
INT sitaraCfgPlcyCbqClassLanMaxBurst	1.3.6.1.4.1.2302.1.1.7.1.1.2.1.38	INTEGER	read-create	Class Maxmum Burst bandwidth in LAN direction. Value 0 specified invalid or not defined
TIK sitaraCfgPlcyCbqClassLanMaxDelay	1.3.6.1.4.1.2302.1.1.7.1.1.2.1.15	TimeTicks	read-create	sitaraCfgPlcyCbqClassLanMaxDelay specifies maximum delay in the Lan direction in 'milli sec'. Lower and upper limits for the delay is calulated from the following formulas lower bound delay = roundUp ( 4 * 8 * MTU / BW (in kbps)) upper bound delay = roundDown (200 * 8 * MTU / BW (in kbps))
INT sitaraCfgPlcyCbqClassLanMinBurst	1.3.6.1.4.1.2302.1.1.7.1.1.2.1.37	INTEGER	read-create	Class Minmum Burst bandwidth in LAN direction. Value 0 specified invalid or not defined
U32 sitaraCfgPlcyCbqClassLanMtuValue	1.3.6.1.4.1.2302.1.1.7.1.1.2.1.14	Unsigned32	read-create	MTU value in the Lan direction specified in units 'bytes'
POL sitaraCfgPlcyCbqClassLanPriority	1.3.6.1.4.1.2302.1.1.7.1.1.2.1.7	PolicyPriority	read-create	sitaraCfgPlcyCbqClassLanPriority gives the priority of the Class in the LAN direction.
G32 sitaraCfgPlcyCbqClassLanSessionBw	1.3.6.1.4.1.2302.1.1.7.1.1.2.1.8	Gauge32	read-create	sitaraCfgPlcyCbqClassLanSessionBw specifies the minimum session bandwidth in the LAN direction for TCP/IP traffic.
INT sitaraCfgPlcyCbqClassLanTosEnabled	1.3.6.1.4.1.2302.1.1.7.1.1.2.1.11	INTEGER	read-create	Used to enable or disable type of service remarking in the LAN direction.
INT sitaraCfgPlcyCbqClassLanTosMask	1.3.6.1.4.1.2302.1.1.7.1.1.2.1.13	INTEGER	read-create	Mask applied to the TOS value above.
INT sitaraCfgPlcyCbqClassLanTosValue	1.3.6.1.4.1.2302.1.1.7.1.1.2.1.12	INTEGER	read-create	Type of service value that will be written to packets in this class when they exit the QosWorks device.
U32 sitaraCfgPlcyCbqClassNextIndex	1.3.6.1.4.1.2302.1.1.7.1.1.1	Unsigned32	read-only	The next available CBQ class table index.
STR sitaraCfgPlcyCbqClassOwner	1.3.6.1.4.1.2302.1.1.7.1.1.2.1.28	SitaraOwnerString	read-create	sitaraCfgPlcyCbqClassOwner is used to identify the table row owner for this class. Usually this will either be a user or the management system that created the row in the table. Formate of the Owner string as follows: Owner String = ScheduleAlias(PolicyName):ClassPathName
POL sitaraCfgPlcyCbqClassPathName	1.3.6.1.4.1.2302.1.1.7.1.1.2.1.3	PolicyPathName	read-only	sitaraCfgPlcyCbqClassPathName object contains the fully specified path to this policy element. The last node in the path is the alias described in this row of the table.
POL sitaraCfgPlcyCbqClassPolicyStatus	1.3.6.1.4.1.2302.1.1.7.1.1.2.1.30	PolicyStatus	read-create	The sitaraCfgPlcyCbqClassPolicyStatus PolicyStatus object can be set with the following values: running(1), -- Contents of the row are -- running in the current policy -- configuration. pending(2) -- Contents of the row are -- not running in the curent policy -- configuration. When a row is created, the value of this object is initialized with Pending. When a policy is updated successfully and the system is reinitialized with the new represented by this row of the table, then value is changed from Pending to Running.
ROW sitaraCfgPlcyCbqClassStatus	1.3.6.1.4.1.2302.1.1.7.1.1.2.1.31	RowStatus	read-create	Current status of the sitaraCfgPlcyCbqClass entry.
sitaraCfgPlcyCbqClassTable	1.3.6.1.4.1.2302.1.1.7.1.1.2		not-accessible	The sitaraCfgPlcyCbqClassTable contains an entry for each CBQ policy associated with a particular service. Classes provide the finest resolution available for bandwidth allocation. A single class is typically shared by several categories of traffic which each category defined as a filter. See the sitaraCfgPlcyFilterTable.
ADM sitaraCfgPlcyCbqClassWanAdminCtrl	1.3.6.1.4.1.2302.1.1.7.1.1.2.1.20	AdmissionState	read-create	sitaraCfgPlcyCbqClassWanAdminCtrl allows the system to determine the action to take when new requests are recieved by the system for sessions in the WAN direction when the allocated limit for this class has been reached. Depending on the value of this object, new requests can be granted with reduced bandwith, rejected, etc. See the AdmissionState textual convention for more information.
G32 sitaraCfgPlcyCbqClassWanBandWidth	1.3.6.1.4.1.2302.1.1.7.1.1.2.1.16	Gauge32	read-create	Class bandwidth in WAN direction. This should be less than the available bandwidth of the parent group or link.
G32 sitaraCfgPlcyCbqClassWanBurst	1.3.6.1.4.1.2302.1.1.7.1.1.2.1.17	Gauge32	read-create	Class Burst bandwidth in WAN direction. This should be less than the available burst bandwidth for the parent group or link.
INT sitaraCfgPlcyCbqClassWanHttpCaching	1.3.6.1.4.1.2302.1.1.7.1.1.2.1.21	INTEGER	read-create	Used to enable or disable WEB caching. This is applicable for classes that handle HTTP traffic. The value should be 2 - disabled for those clases that do not handle HTTP traffic or for those classes that do, but for which caching is not desired.
INT sitaraCfgPlcyCbqClassWanMaxBurst	1.3.6.1.4.1.2302.1.1.7.1.1.2.1.40	INTEGER	read-create	Class Maxmum Burst bandwidth in WAN direction. Value 0 specified invalid or not defined
TIK sitaraCfgPlcyCbqClassWanMaxDelay	1.3.6.1.4.1.2302.1.1.7.1.1.2.1.26	TimeTicks	read-create	This object specifies maximum delay in the Wan direction in 'milli sec'. Lower and upper limits for the delay is calulated from the following formulas lower bound delay = roundUp ( 4 * 8 * MTU / BW (in kbps)) upper bound delay = roundDown (200 * 8 * MTU / BW (in kbps))
INT sitaraCfgPlcyCbqClassWanMinBurst	1.3.6.1.4.1.2302.1.1.7.1.1.2.1.39	INTEGER	read-create	Class Minmum Burst bandwidth in WAN direction. Value 0 specified invalid or not defined
U32 sitaraCfgPlcyCbqClassWanMtuValue	1.3.6.1.4.1.2302.1.1.7.1.1.2.1.25	Unsigned32	read-create	MTU value in the Wan direction specified in units 'bytes'
POL sitaraCfgPlcyCbqClassWanPriority	1.3.6.1.4.1.2302.1.1.7.1.1.2.1.18	PolicyPriority	read-create	sitaraCfgPlcyCbqClassWanPriority gives the priority this class should receive relative to all other traffic in the WAN direction.
G32 sitaraCfgPlcyCbqClassWanSessionBw	1.3.6.1.4.1.2302.1.1.7.1.1.2.1.19	Gauge32	read-create	sitaraCfgPlcyCbqClassWanSessionBw specifies the minimum session bandwidth in the WAN direction for TCP/IP traffic.
INT sitaraCfgPlcyCbqClassWanTosEnabled	1.3.6.1.4.1.2302.1.1.7.1.1.2.1.22	INTEGER	read-create	Used to control type of service remarking in the WAN direction.
INT sitaraCfgPlcyCbqClassWanTosMask	1.3.6.1.4.1.2302.1.1.7.1.1.2.1.24	INTEGER	read-create	Mask for the TOS value in the WAN direction.
INT sitaraCfgPlcyCbqClassWanTosValue	1.3.6.1.4.1.2302.1.1.7.1.1.2.1.23	INTEGER	read-create	New TOS value to be applied to traffic in this class in the WAN direction.
POL sitaraCfgPlcyCrossCbqClassAlias	1.3.6.1.4.1.2302.1.1.3.1.1.4	PolicyAlias	not-accessible	This object is used as one of the indices for this table. A value of '0' indicates an as yet unassigned/created class for a particular group or link. In all other cases this value will be the same as values found in sitaraCfgPlcyCbqClassAlias.
U32 sitaraCfgPlcyCrossCbqClassIndex	1.3.6.1.4.1.2302.1.1.3.1.1.11	Unsigned32	read-only	The value of this object is the same as sitaraCfgPlcyCbqClassIndex. '0xffffffff' is used to to represent as yet unassigned/created class for this link or group.
POL sitaraCfgPlcyCrossFilterAlias	1.3.6.1.4.1.2302.1.1.3.1.1.5	PolicyAlias	not-accessible	This object is used as one of the indices for this table. A value of '0' indicates an as yet unassigned/created filter for a class. In all other cases this value will be the same as values found in sitaraCfgPlcyFilterAlias.
U32 sitaraCfgPlcyCrossFilterIndex	1.3.6.1.4.1.2302.1.1.3.1.1.12	Unsigned32	read-only	The value of this object is the same as sitaraCfgPlcyFilterIndex. '0xffffffff' is used to to represent as yet unassigned/created filter for this class.
sitaraCfgPlcyCrossGroup	1.3.6.1.4.1.2302.1.1.3
POL sitaraCfgPlcyCrossGroupAlias	1.3.6.1.4.1.2302.1.1.3.1.1.3	PolicyAlias	not-accessible	This object is used as one of the indices for this table. A value of '0' indicates an as yet unassigned/created group for a particular link. In all other cases this value will be the same as values found in sitaraCfgPlcyGroupAlias.
U32 sitaraCfgPlcyCrossGroupIndex	1.3.6.1.4.1.2302.1.1.3.1.1.10	Unsigned32	read-only	The value of this object is the same as sitaraCfgPlcyGroupIndex. '0xffffffff' is used to to represent as yet unassigned/created group for this link.
U32 sitaraCfgPlcyCrossIndex	1.3.6.1.4.1.2302.1.1.3.1.1.6	Unsigned32	not-accessible	This object specifies the serial number for this row of the table and ensures uniqueness for each row.
sitaraCfgPlcyCrossIndexTable	1.3.6.1.4.1.2302.1.1.3.1		not-accessible	Cross Index table entry objects are the indices of the Schedule, Link, Link Network Destination, Group, CBQ Class and Filter Tables.
sitaraCfgPlcyCrossIndexTableEntry	1.3.6.1.4.1.2302.1.1.3.1.1		not-accessible	All objects in this table, except the sitaraCfgPlcyCrossIndex specify active indices of the rest of the tables in this MIB Module. All objects/indices in an entry need not be valid all the times. That is, an row in this table might have only one or two valid objects. When an entry is created in this table, index objects are initialized with an invalid value '0xffffffff' and all Alias (Those are indices to this table) are initialized with Octet String value '0', i.e. length=1, value =0
POL sitaraCfgPlcyCrossLinkAlias	1.3.6.1.4.1.2302.1.1.3.1.1.2	PolicyAlias	not-accessible	This object is used as one of the indices for this table. A value of '0' indicates an as yet unassigned/created link in a schedule. In all other cases this value will be the same as values found in sitaraCfgPlcyLinkAlias.
U32 sitaraCfgPlcyCrossLinkIndex	1.3.6.1.4.1.2302.1.1.3.1.1.8	Unsigned32	read-only	The value of this object is the same as sitaraCfgPlcySchdIndex. '0xffffffff' is used to to represent an as yet unassigned/created link in this schedule.
U32 sitaraCfgPlcyCrossLinkNetDestIndex	1.3.6.1.4.1.2302.1.1.3.1.1.9	Unsigned32	read-only	The value of this object is the same as sitaraCfgPlcyLinkNetDestNextIndex. '0xffffffff' is used to to represent as yet unassigned/created network destinations specifically targeted for this link as described in the sitaraCfgPlcyLinkNetDestTable.
POL sitaraCfgPlcyCrossSchdAlias	1.3.6.1.4.1.2302.1.1.3.1.1.1	PolicyAlias	not-accessible	This object is used as one of the indices for cross index table. The value of this object will be the same as the values found in the sitaraCfgPlcySchdAlias.
U32 sitaraCfgPlcyCrossSchdIndex	1.3.6.1.4.1.2302.1.1.3.1.1.7	Unsigned32	read-only	The value of this object is the same as that contained in sitaraCfgPlcySchdIndex.
sitaraCfgPlcyFilter	1.3.6.1.4.1.2302.1.1.8
POL sitaraCfgPlcyFilterAlias	1.3.6.1.4.1.2302.1.1.8.2.1.2	PolicyAlias	read-create	The filter alias is unique identifier in the Filter Table for a schedule. See the textual convention information at the beginning of this module for PolicyAlias and PolicyPathName for correct usage information.
STR sitaraCfgPlcyFilterDscr	1.3.6.1.4.1.2302.1.1.8.2.1.15	PolicyDisplayString	read-create	A textual description of this filter entry.
sitaraCfgPlcyFilterEntry	1.3.6.1.4.1.2302.1.1.8.2.1		not-accessible	Locally held information about a particular policy filter.
U32 sitaraCfgPlcyFilterIndex	1.3.6.1.4.1.2302.1.1.8.2.1.1	Unsigned32	not-accessible	A unique value for each filter entry. A new index value will be used each time a Filter is associated with a Class. The sitaraCfgPlcyFilterNextIndex is the object to be used to determine what the next available filter index should be.
IP sitaraCfgPlcyFilterLanIpAddr	1.3.6.1.4.1.2302.1.1.8.2.1.7	IpAddress	read-create	IP address associated with the policy filter if the filter address is on the LAN side of the QosWorks device.
INT sitaraCfgPlcyFilterLanIpEndPort	1.3.6.1.4.1.2302.1.1.8.2.1.6	INTEGER	read-create	The ending IP port number of the port range in the LAN direction. To specify a range this value should be more then the Start port number. If the end port number is less than the start port number, then the range will contain only one port number, the starting port number.
INT sitaraCfgPlcyFilterLanIpStartPort	1.3.6.1.4.1.2302.1.1.8.2.1.5	INTEGER	read-create	The starting IP port number of a range of port numbers for the filter in the LAN direction. When the sitaraCfgPlcyFilterLanIpEndPort is less than sitaraCfgPlcyFilterLanIpStartPort, then the range contains only one port number, the sitaraCfgPlcyFilterLanIpStartPort number.
IP sitaraCfgPlcyFilterLanNetMask	1.3.6.1.4.1.2302.1.1.8.2.1.8	IpAddress	read-create	Network mask associated with the policy filter if the filter address is on the LAN side of the QosWorks device.
U32 sitaraCfgPlcyFilterNextIndex	1.3.6.1.4.1.2302.1.1.8.1	Unsigned32	read-only	Next available Filter Table index value.
INT sitaraCfgPlcyFilterOrder	1.3.6.1.4.1.2302.1.1.8.2.1.13	INTEGER	read-create	The order in which the filters are to be evaluated.
STR sitaraCfgPlcyFilterOwner	1.3.6.1.4.1.2302.1.1.8.2.1.14	SitaraOwnerString	read-create	Used to identify the owner of this row in the table.
POL sitaraCfgPlcyFilterPathName	1.3.6.1.4.1.2302.1.1.8.2.1.3	PolicyPathName	read-only	sitaraCfgPlcyFilterPathName contains the fully specified path to this policy element. The last node in the path is the alias described in this row of the table.
POL sitaraCfgPlcyFilterPolicyStatus	1.3.6.1.4.1.2302.1.1.8.2.1.16	PolicyStatus	read-create	Policy status takes following values. See the PolicyStatus textual convention.
INT sitaraCfgPlcyFilterProtocolType	1.3.6.1.4.1.2302.1.1.8.2.1.4	INTEGER	read-create	Protocol identifier associated with a particular filter.
ROW sitaraCfgPlcyFilterStatus	1.3.6.1.4.1.2302.1.1.8.2.1.17	RowStatus	read-create	Current status of the sitaraCfgPlcyFilter entry.
sitaraCfgPlcyFilterTable	1.3.6.1.4.1.2302.1.1.8.2		not-accessible	The sitaraCfgPlcyFilterTable contains an entry for each filter associated with a particular CBQ Class. Each Class defined in the sitaraCfgPlcyCbqClassTable may have one or more filters associated with it.
INT sitaraCfgPlcyFilterTosEnabled	1.3.6.1.4.1.2302.1.1.8.2.1.18	INTEGER	read-create	Used to enable or disable TOS type of service of this filter. The TOS value is only applied to IP traffic so for nonIP, this should not be used.
INT sitaraCfgPlcyFilterTosMask	1.3.6.1.4.1.2302.1.1.8.2.1.20	INTEGER	read-create	Mask applied to the TOS value above.
INT sitaraCfgPlcyFilterTosValue	1.3.6.1.4.1.2302.1.1.8.2.1.19	INTEGER	read-create	Type of service value that will be written to packets in this class when they exit the Sitara QoS device.
IP sitaraCfgPlcyFilterWanIpAddr	1.3.6.1.4.1.2302.1.1.8.2.1.11	IpAddress	read-create	IP source address associated with the policy filter in the WAN direction.
INT sitaraCfgPlcyFilterWanIpEndPort	1.3.6.1.4.1.2302.1.1.8.2.1.10	INTEGER	read-create	Ending IP port number of the Port range in the WAN direction.
INT sitaraCfgPlcyFilterWanIpStartPort	1.3.6.1.4.1.2302.1.1.8.2.1.9	INTEGER	read-create	Starting IP port number of a port range in the WAN direction. The sitaraCfgPlcyFilterWanIpStartPort, sitaraCfgPlcyFilterWanIpEndPort, sitaraCfgPlcyFilterWanIpAddr, and sitaraCfgPlcyFilterWanNetMask have the same semanitcs as their LAN based equivalents only they control behavior for addresses, ports, and network masks for filters on the WAN side of the QosWorks device.
IP sitaraCfgPlcyFilterWanNetMask	1.3.6.1.4.1.2302.1.1.8.2.1.12	IpAddress	read-create	Network mask associated with the policy filter IP address on the WAN side of the QosWorks device.
sitaraCfgPlcyGenlObjs	1.3.6.1.4.1.2302.1.1.2
INT sitaraCfgPlcyGlobalStorage	1.3.6.1.4.1.2302.1.1.2.3	INTEGER	read-write	When this object value is set to: saveToPerm(1) sys.policy is updated with information currently in all the objects in this subagent with the exception of the cross index table that is not part of the sys.policy information. CBQD will be re-started with the new information. clearAllTables(2) All entries in all tables are cleared. The subagent is reinitialized. syncRunningPlcy(3) All entries in all tables are cleared. The subagent is reinitialized and reads the currently saved sys.policy file. This ensures synchronization of the central policy manager with changes that have been made by the CLI or WEB interfaces.
sitaraCfgPlcyGroup	1.3.6.1.4.1.2302.1.1.6
POL sitaraCfgPlcyGroupAlias	1.3.6.1.4.1.2302.1.1.6.2.1.2	PolicyAlias	read-create	The group alias is unique identifier in the Group Table. See the PolicyAlias and PolicyPathName textual conventions for additional details.
TRA sitaraCfgPlcyGroupDirection	1.3.6.1.4.1.2302.1.1.6.2.1.12	TrafficDirection	read-create	The policy group traffic direction object indicates the directionality of this flow. Based on the value of this object, the LAN and WAN bandwidth paramerts will be filled in. If this is a bi-directional flow, values for both the LAN and WAN objects should be supplied.
STR sitaraCfgPlcyGroupDscr	1.3.6.1.4.1.2302.1.1.6.2.1.5	PolicyDisplayString	read-create	A description of the group defined in the table row entry.
INT sitaraCfgPlcyGroupEnabled	1.3.6.1.4.1.2302.1.1.6.2.1.4	INTEGER	read-create	sitaraCfgPlcyGroupEnabled is to specify whether this entry is enabled or disabled.
sitaraCfgPlcyGroupEntry	1.3.6.1.4.1.2302.1.1.6.2.1		not-accessible	Each entry contains the information about the bandwidth, burst and name of the group. When an entry is created, resources (Bandwidth, Burst..) should be less than the available resources at the parent which could either be a link or a group since the system allows creation of groups that contain groups.
U32 sitaraCfgPlcyGroupIndex	1.3.6.1.4.1.2302.1.1.6.2.1.1	Unsigned32	not-accessible	Unique value for each entry. A new index value must be used each time a row is created in this table to associate a group with a Link. The sitaraCfgPlcyGroupNextIndex is the object to be used to determine what the next available Group Index should be.
G32 sitaraCfgPlcyGroupLanAvlBandWidth	1.3.6.1.4.1.2302.1.1.6.2.1.8	Gauge32	read-only	Available bandwidth in LAN direction for this group. Available bandwidth is the amount of capacity that remains after all the bandwidth that has been configured for all child groups and classes in a link has been subtracted.
G32 sitaraCfgPlcyGroupLanBandWidth	1.3.6.1.4.1.2302.1.1.6.2.1.6	Gauge32	read-create	Group bandwidth in the LAN direction. This should be less than the parent available bandwidth.
G32 sitaraCfgPlcyGroupLanBurst	1.3.6.1.4.1.2302.1.1.6.2.1.7	Gauge32	read-create	Group Burst bandwidth in the LAN direction. This should be less than the parent group/link available burst bandwidth.
U32 sitaraCfgPlcyGroupNextIndex	1.3.6.1.4.1.2302.1.1.6.1	Unsigned32	read-only	Next available index to be used to create an entry in the sitaraCfgPlcyGroupTable.
STR sitaraCfgPlcyGroupOwner	1.3.6.1.4.1.2302.1.1.6.2.1.14	SitaraOwnerString	read-create	Object sitaraCfgPlcyGroupOwner is used to identify the owner of the information identified in this row of the table. Formate of the Owner string as follows: Owner String = ScheduleAlias(PolicyName):GroupPathName
U32 sitaraCfgPlcyGroupParentIndex	1.3.6.1.4.1.2302.1.1.6.2.1.13	Unsigned32	read-create	Object sitaraCfgPlcyGroupParentIndex contains the value of a parent group is this group is desired to be a child of another group. If the value of this object is 0 then this group is not a member of another group and is a direct child of the link specified in the index of this table.
POL sitaraCfgPlcyGroupPathName	1.3.6.1.4.1.2302.1.1.6.2.1.3	PolicyPathName	read-only	The fully qualified unique path to this policy element. See the PolicyAlias and PolicyPathName textual conventions for additional information.
POL sitaraCfgPlcyGroupPolicyStatus	1.3.6.1.4.1.2302.1.1.6.2.1.15	PolicyStatus	read-create	The sitaraCfgPlcyGroupPolicyStatus PolicyStatus object can be set with the following values: running(1), -- Contents of the row are -- running in the current policy -- configuration. pending(2) -- Contents of the row are -- not running in the curent policy -- configuration. When a row is created, the value of this object is initialized with Pending. When a policy is updated successfully and the system is reinitialized with the new represented by this row of the table, then value is changed from Pending to Running.
ROW sitaraCfgPlcyGroupStatus	1.3.6.1.4.1.2302.1.1.6.2.1.16	RowStatus	read-create	Current status of this table row.
sitaraCfgPlcyGroupTable	1.3.6.1.4.1.2302.1.1.6.2		not-accessible	Class groups provide a parent level for two or more classes. This makes it possible to enforce bandwidth and bursting restrictions by group as well as individual class.
G32 sitaraCfgPlcyGroupWanAvlBandWidth	1.3.6.1.4.1.2302.1.1.6.2.1.11	Gauge32	read-only	Available bandwidth in WAN direction for this group. Available bandwidth is the amount of capacity that remains after all the bandwidth that has been configured for all child groups and classes has been subtracted.
G32 sitaraCfgPlcyGroupWanBandWidth	1.3.6.1.4.1.2302.1.1.6.2.1.9	Gauge32	read-create	Group bandwidth in WAN direction. This should be less than the parent available Band width
G32 sitaraCfgPlcyGroupWanBurst	1.3.6.1.4.1.2302.1.1.6.2.1.10	Gauge32	read-create	Group Burst bandwidth in WAN direction. This should be less than the parent available Burst bandwidth.
DAT sitaraCfgPlcyLastUpdateTime	1.3.6.1.4.1.2302.1.1.2.4	DateAndTime	read-only	sitaraCfgPlcyLastUpdateTime object contains the Date and Time when the Last policy is loaded
sitaraCfgPlcyLink	1.3.6.1.4.1.2302.1.1.5
POL sitaraCfgPlcyLinkAlias	1.3.6.1.4.1.2302.1.1.5.2.1.2	PolicyAlias	read-create	The Link Alias is the name associated with the link identified in this row of the table. Since a link may be used in several schedules, it is possible that a link will appear in more than one row of this table.
STR sitaraCfgPlcyLinkDscr	1.3.6.1.4.1.2302.1.1.5.2.1.5	PolicyDisplayString	read-create	Descriptive information about this link entry.
INT sitaraCfgPlcyLinkEnabled	1.3.6.1.4.1.2302.1.1.5.2.1.4	INTEGER	read-create	The current status of this link in this schedule.
sitaraCfgPlcyLinkEntry	1.3.6.1.4.1.2302.1.1.5.2.1		not-accessible	A link alias such as Boston, may appear several times in this table if it is used in several schedules. It is the combination of sitaraCfgPlcySchdIndex and sitaraCfgPlcyLinkIndex that provide uniqueness. The indexing in this table does allow the retrieval of all links associated with a schedule.
U32 sitaraCfgPlcyLinkIndex	1.3.6.1.4.1.2302.1.1.5.2.1.1	Unsigned32	not-accessible	A unique value for each Link Entry. A new index value will be used each time a link is associated with a schedule. The sitaraCfgPlcyLinkNextIndex is the object to be used to determine what the next available Link Index should be.
G32 sitaraCfgPlcyLinkLanAvlBandWidth	1.3.6.1.4.1.2302.1.1.5.2.1.8	Gauge32	read-only	Available bandwidth in the LAN direction for this link. Available bandwidth is the amount of capacity that remains after all the bandwidth that has been configured for all child groups and classes has been subtracted.
G32 sitaraCfgPlcyLinkLanBandWidth	1.3.6.1.4.1.2302.1.1.5.2.1.6	Gauge32	read-create	The bandwidth in kilobits per second allocated to this link in the LAN direction.
G32 sitaraCfgPlcyLinkLanBurst	1.3.6.1.4.1.2302.1.1.5.2.1.7	Gauge32	read-create	The bandwidth limit that traffic in the LAN direction is allowed to burst to on this link. This is measured in kilobits per second.
IP sitaraCfgPlcyLinkNetDestAddr	1.3.6.1.4.1.2302.1.1.5.4.1.2	IpAddress	read-create	IP address of the destination network.
sitaraCfgPlcyLinkNetDestEntry	1.3.6.1.4.1.2302.1.1.5.4.1		not-accessible	Each entry consists of a destination IP Address and corresponding network mask. Each new link created should have at least one destination network specified for IP traffic. See the policy filter table for additional detail.
U32 sitaraCfgPlcyLinkNetDestIndex	1.3.6.1.4.1.2302.1.1.5.4.1.1	Unsigned32	not-accessible	A unique value for each network destination entry. A new index value must be used each time a row is created in this table to associate a network destination with a link. The sitaraCfgPlcyLinkNetDestNextIndex is the object to be used to determine what the next available Link Net Dest Index should be.
IP sitaraCfgPlcyLinkNetDestMask	1.3.6.1.4.1.2302.1.1.5.4.1.3	IpAddress	read-create	The network mask to be used in association with the sitaraCfgPlcyLinkNetDestAddr.
U32 sitaraCfgPlcyLinkNetDestNextIndex	1.3.6.1.4.1.2302.1.1.5.3	Unsigned32	read-only	The next available Link Network Destination Address Table index to be used to create a new entry in the network destination address table.
STR sitaraCfgPlcyLinkNetDestOwner	1.3.6.1.4.1.2302.1.1.5.4.1.4	SitaraOwnerString	read-create	Object sitaraCfgPlcyLinkNetDestOwner is used to identify the Owner of the row. This will usually be the management system or user that created this row of the table.
ROW sitaraCfgPlcyLinkNetDestStatus	1.3.6.1.4.1.2302.1.1.5.4.1.5	RowStatus	read-create	Current status of status information identified by the table row entry.
sitaraCfgPlcyLinkNetDestTable	1.3.6.1.4.1.2302.1.1.5.4		not-accessible	The Link Network Destination Address table gives the IP Addresses and network masks for links that are intended to carry traffic only to specfic destination networks.
U32 sitaraCfgPlcyLinkNextIndex	1.3.6.1.4.1.2302.1.1.5.1	Unsigned32	read-only	Next available Link Table index. This object is used by management applications to determine the value to use for sitaraCfgPlcyLinkIndexindex when creating a new row in the sitaraCfgPlcyLinkTable.
STR sitaraCfgPlcyLinkOwner	1.3.6.1.4.1.2302.1.1.5.2.1.12	SitaraOwnerString	read-create	sitaraCfgPlcyLinkOwner object is used to identify the Owner of the row which will usually be the identity of the management software or user that created this link. Formate of the Owner string as follows: Owner String = ScheduleAlias(PolicyName):LinkPathName:LinkCustomerID
POL sitaraCfgPlcyLinkPathName	1.3.6.1.4.1.2302.1.1.5.2.1.3	PolicyPathName	read-only	Path Name gives the full specification of this link which includes both the schedule and link information. See the PolicyPathName textual convention.
POL sitaraCfgPlcyLinkPolicyStatus	1.3.6.1.4.1.2302.1.1.5.2.1.13	PolicyStatus	read-create	The sitaraCfgPlcyLinkPolicyStatus object can be set with the following values: running(1), -- Contents of the row are -- running in the current policy -- configuration. pending(2) -- Contents of the row are -- not running in the curent policy -- configuration. When a row is created, the value of this object is initialized with Pending. When a policy is updated successfully and the system is reinitialized with the new represented by this row of the table, then value is changed from Pending to Running.
ROW sitaraCfgPlcyLinkStatus	1.3.6.1.4.1.2302.1.1.5.2.1.14	RowStatus	read-create	The current status of this row of the link table.
sitaraCfgPlcyLinkTable	1.3.6.1.4.1.2302.1.1.5.2		not-accessible	The Link Table contains information about links that have been defined to the QosWorks device. Each schedule will contain one or more active links. Each link can contain one or more groups which are in turn comprised of classes. Classes can also be directly contained in links.
G32 sitaraCfgPlcyLinkWanAvlBandWidth	1.3.6.1.4.1.2302.1.1.5.2.1.11	Gauge32	read-only	Available link bandwidth in the WAN direction. Available bandwidth is the amount of capacity that remains after all the bandwidth that has been configured for all child groups and classes has been subtracted.
G32 sitaraCfgPlcyLinkWanBandWidth	1.3.6.1.4.1.2302.1.1.5.2.1.9	Gauge32	read-create	Link bandwidth in the WAN direction.
G32 sitaraCfgPlcyLinkWanBurst	1.3.6.1.4.1.2302.1.1.5.2.1.10	Gauge32	read-create	Link Burst bandwidth in the WAN direction.
sitaraCfgPlcyMIB	1.3.6.1.4.1.2302.1.1.1			This version of MIB supports QoSWorks 1.9.2 or less sitaraCfgPlcyMIB MIB module describes Sitara's QosWorks/QosArray policy configuration objects
sitaraCfgPlcyNotifns	1.3.6.1.4.1.2302.1.1.9
NTF sitaraCfgPlcyNotifnsCbqdReStart	1.3.6.1.4.1.2302.1.1.9.2			sitaraCfgPlcyNotifnsCbqdReStart notification is generated when CBQD is restarted.
NTF sitaraCfgPlcyNotifnsClassEntryUpdate	1.3.6.1.4.1.2302.1.1.9.11			sitaraCfgPlcyNotifnsClassEntryUpdate notification is generated when the sitaraCfgPlcyCbqClassStatus object's status is changed from/to active. This notification message contains SitaraCfgPlcyCbqClassEntry objects
NTF sitaraCfgPlcyNotifnsFailToReStart	1.3.6.1.4.1.2302.1.1.9.3			sitaraCfgPlcyNotifnsFailToReStart, failure notification, is generated when there is failure to Restart the Cbqd based on a restart request initiated by the sub agent that realizes this MIB Module.
NTF sitaraCfgPlcyNotifnsFailToUpdatePolicy	1.3.6.1.4.1.2302.1.1.9.4			sitaraCfgPlcyNotifnsFailToUpdatePolicy notification is generated when there has been a failure to load/Verify the policy
NTF sitaraCfgPlcyNotifnsFailToXlatePolicy	1.3.6.1.4.1.2302.1.1.9.5			sitaraCfgPlcyNotifnsFailToXlatePolicy failure notification is generated when there has been a failure to translate the policy to cbqd conf file.
NTF sitaraCfgPlcyNotifnsFilterEntryUpdate	1.3.6.1.4.1.2302.1.1.9.12			sitaraCfgPlcyNotifnsFilterEntryUpdate notification is generated when the sitaraCfgPlcyFilterstatus object's status is changed from/to active. This notification message contains SitaraCfgPlcyFilterEntry objects
NTF sitaraCfgPlcyNotifnsGroupEntryUpdate	1.3.6.1.4.1.2302.1.1.9.10			sitaraCfgPlcyNotifnsGroupEntryUpdate notification is generated when the sitaraCfgPlcyGroupStatus object's status is changed from/to active. This notification message contains SitaraCfgPlcyGroupEntry objects
NTF sitaraCfgPlcyNotifnsInvalidPolicy	1.3.6.1.4.1.2302.1.1.9.6			sitaraCfgPlcyNotifnsInvalidPolicy notification is generated when a row in any of the policy tables becomes invalid due to deletion of some of the objects/rows in the valid policy. This notification could be generated when agent detects invalid policy
NTF sitaraCfgPlcyNotifnsLinkEntryUpdate	1.3.6.1.4.1.2302.1.1.9.8			sitaraCfgPlcyNotifnsLinkEntryUpdate notification is generated when the sitaraCfgPlcyLinkStatus object's status is changed from/to active. This notification message contains SitaraCfgPlcyLinkEntry objects
NTF sitaraCfgPlcyNotifnsNetDestEntryUpdate	1.3.6.1.4.1.2302.1.1.9.9			sitaraCfgPlcyNotifnsNetDestEntryUpdate notification is generated when the sitaraCfgPlcyLinkNetDestStatus object's status is changed from/to active. This notification message contains SitaraCfgPlcyLinkNetDestEntry objects
NTF sitaraCfgPlcyNotifnsPlcySyncUp	1.3.6.1.4.1.2302.1.1.9.13			sitaraCfgPlcyNotifnsPlcySyncUp notification is generated when Policy agent Sync up with the policy updated by other than SNMP policy agent (Policy update could be from CLI/WebUI)
NTF sitaraCfgPlcyNotifnsPlcySyncUpFailure	1.3.6.1.4.1.2302.1.1.9.14			sitaraCfgPlcyNotifnsPlcySyncUp notification is generated when Policy agent Failed to Sync up with the policy updated by other than SNMP policy agent (Policy update could be from CLI/WebUI)
NTF sitaraCfgPlcyNotifnsPlcyUpdate	1.3.6.1.4.1.2302.1.1.9.1			sitaraCfgPlcyNotifnsPlcyUpdate notification is generated when sitaraCfgPlcyGlobalStorage object is set. This notification could be generated when policy is successfuly Loaded/Verified
NTF sitaraCfgPlcyNotifnsSchdEntryUpdate	1.3.6.1.4.1.2302.1.1.9.7			sitaraCfgPlcyNotifnsSchdEntryUpdate notification is generated when the sitaraCfgPlcySchdStatus object's status is changed from/to active. This notification message contains SitaraCfgPlcySchdEntry objects
OCT sitaraCfgPlcyPerRowUpdate	1.3.6.1.4.1.2302.1.1.2.2	OCTET STRING	read-write	sitaraCfgPlcyPerRowUpdate object gives the ability to automatically update the sys.policy file when ever any row of the type specified by this object is moved to active. This object is checked when any of the rows in the following tables is moved to an active status: . Schedule Table : 0x01 . Link Table : 0x02 . Link Net Destination Table : 0x04 . Group Table : 0x08 . Class Table : 0x10 . Filter Table : 0x20 E.g. When schedule table Row status changes to Active, 0x01 bit is checked, if that is set sys.policy is updated and CBQD will be restarted. Care should be exercised when setting this object since the effect of enabling this automatic update of the sys.policy on a per row basis is that the sys.policy is written with each row's move to the active state. This also causes the queuing system to be restarted with the new parameters. For large change transactions, use the sitaraCfgPlcyGlobalStorage object.
sitaraCfgPlcyQClass	1.3.6.1.4.1.2302.1.1.7.1
sitaraCfgPlcySchd	1.3.6.1.4.1.2302.1.1.4
POL sitaraCfgPlcySchdAlias	1.3.6.1.4.1.2302.1.1.4.2.1.2	PolicyAlias	read-create	The schedule alias must be unique for every row of this table. If an alias is 'foo' it would be allowed only in one row of this table. It would also be allowed to exist once in the respective alias fields of the other tables in this MIB Module, specifically the link, group, class and filter tables.
DAY sitaraCfgPlcySchdDaysOfWeek	1.3.6.1.4.1.2302.1.1.4.2.1.3	DaysOfWeek	read-create	Specifies the days of the week this schedule entry is to be active. When a new schedule is created, the default is that it is not active any time, meaning no days of the week.
TIM sitaraCfgPlcySchdEndTime	1.3.6.1.4.1.2302.1.1.4.2.1.5	TimeAndZone	read-create	Object sitaraCfgPlcySchdEndTime gives the end time of the schedule identified by this row of the table for the days of the week the schedule is active as specified in the sitaraCfgPlcySchdDaysOfWeek object. If zone is not supplied, time is treated as Local time. If zone information is supplied with this object, the system will calculate the correct offset.
sitaraCfgPlcySchdEntry	1.3.6.1.4.1.2302.1.1.4.2.1		not-accessible	Each entry includes the Start-Time and End-Time of the days as specified by the DaysOfWeek textual convention: E.g.: Start-Time :09:00 End-Time :18:00 DaysOfWeek : 0x7c The parameters above would describe a schedule that is active between 9am to 6pm on week days Monday to Friday inclusive.
U32 sitaraCfgPlcySchdIndex	1.3.6.1.4.1.2302.1.1.4.2.1.1	Unsigned32	not-accessible	sitaraCfgPlcySchdIndex is a unique value for each schedule entry.
U32 sitaraCfgPlcySchdNextIndex	1.3.6.1.4.1.2302.1.1.4.1	Unsigned32	read-only	Next available Schedule Table index. This object contains the value that a management application should use when creating a new entry in the sitaraCfgPlcySchdTable. When a row is created with this value, the sitaraCfgPlcySchdNextIndex increment by one. In the boundary case where another manager has accessed the value at the same time and attempted to create a row in sitaraCfgPlcySchdNextIndex with the same index value, the second manager will receive and error notification. The semantic for this object is designed to avoid the problem of objects in other MIB Modules that increment on each read causing a more rapid wrap. In both cases the manager must be prepared to receive a message from the agent that the row is already in use since some rows may be long lived.
STR sitaraCfgPlcySchdOwner	1.3.6.1.4.1.2302.1.1.4.2.1.6	SitaraOwnerString	read-create	Object sitaraCfgPlcySchdOwner should be set by the owner of this table row entry immediately after creating the entry. The owner is the user or management system that sent the commands to the system to create this row.
POL sitaraCfgPlcySchdPolicyStatus	1.3.6.1.4.1.2302.1.1.4.2.1.7	PolicyStatus	read-create	The sitaraCfgPlcySchdPolicyStatus object can be set with the following values: running(1), -- Contents of the row are -- running in the current policy -- configuration. pending(2) -- Contents of the row are -- not running in the curent policy -- configuration. When a row is created, the value of this object is initialized with Pending. When a policy is updated successfully and the system is reinitialized with the new represented by this row of the table, then value is changed from Pending to Running.
TIM sitaraCfgPlcySchdStartTime	1.3.6.1.4.1.2302.1.1.4.2.1.4	TimeAndZone	read-create	Object sitaraCfgPlcySchdStartTime gives the start time of the schedule identified by this row of the table for the days of the week the schedule is active as specified in the sitaraCfgPlcySchdDaysOfWeek object. If zone is information is not supplied, time is treated as Local time. If zone information is supplied with this object, the system will calculate the correct offset.
ROW sitaraCfgPlcySchdStatus	1.3.6.1.4.1.2302.1.1.4.2.1.8	RowStatus	read-create	Current status of the Schedule Table Entry. When ever this status is set to active and the sitaraCfgPlcyPerRowUpdate object value bit 0x01 is set, the sys.policy file is updated and CBQD will be re-started with these new values.
sitaraCfgPlcySchdTable	1.3.6.1.4.1.2302.1.1.4.2		not-accessible	Schedule Table sits in the top of the policy Management tree. Each entry of this table gives schedule time interval at which the policy to be applied. This table is linked to the Link table.
OCT sitaraCfgPlcyVersion	1.3.6.1.4.1.2302.1.1.2.1	OCTET STRING	read-only	sitaraCfgPlcyVersion gives the policy version number, that policy agent supports. Policy Version Value VERSION 1 1.5 VERSION 2 N/A VERSION 3 3 VERSION 2 4 min/max/Buerst support

RFC description

Configuration Policy MIB; defines objects for managing network device configuration policies and enforcement rules.

Start monitoring Sitara Networks QosWorks/QosArray bandwidth management appliances (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CFG-PLCY-MIB

What Is CFG-PLCY-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description