All MIBs › CADANT-AAA-MIB
Organization: Arris International Inc.
Last Updated: 2015-09-30
Category: DOCSIS and Cable, Vendor: ARRIS
Description: Manages AAA (Authentication, Authorization, Accounting) services on ARRIS/Cadant C4 CMTS including RADIUS server configuration and session accounting.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is CADANT-AAA-MIB?
CADANT-AAA-MIB is an Arris (formerly Cadant) proprietary MIB configuring AAA-related console/line access parameters on the Cadant C4 CMTS. Its line table, keyed by line index, covers line type, enable state, session and idle timeouts, output pagination, baud rate, and a line-specific password. As a configuration/security MIB it lets an administrator audit console and terminal line access settings — timeouts, baud rate, password presence — across the C4's management lines. It is deployed on Arris/Cadant C4 CMTS platforms in cable operator head-ends. Engineers can download the CADANT-AAA-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in CADANT-AAA-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Arris (Cadant) C4 CMTS
Monitoring Examples
An administrator audits cadLineSessionTimeout and cadLineIdleTimeout across all configured lines to confirm consistent session-security policy on the C4's management access lines.
What Can Be Monitored
- console/terminal line timeouts and access configuration
This MIB depends on
Related MIBs
Imported Objects
From CADANT-PRODUCTS-MIB
| cadAuthentication | OBJECT-IDENTITY |
From CADANT-TC
| AAAmethod | |
| AccountingType | |
| InetAddressIPv4or6 | |
| LineType | |
| SshAuthMethod | |
| SshCipher | |
| SshCipherType | |
| SshKeyExchangeMethod | |
| SshKeyType | |
| SshMacAlg | |
| SshProtocol | |
| SshService |
From SNMP-FRAMEWORK-MIB
| SnmpAdminString |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| TimeTicks | |
| Unsigned32 |
From SNMPv2-TC
| DisplayString | |
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| cadAAA | 1.3.6.1.4.1.4998.1.1.40.1 | The MIB module describes the proprietary AAA configuration parameters used to support authentication and authorization in the C4. | ||
| cadLineTable | 1.3.6.1.4.1.4998.1.1.40.1.2 | not-accessible | This table reflects the AAA configuration for each line (vty or console) in the system. | |
| cadLineEntry | 1.3.6.1.4.1.4998.1.1.40.1.2.1 | not-accessible | ||
| I32 cadLineIndex | 1.3.6.1.4.1.4998.1.1.40.1.2.1.1 | Integer32 | not-accessible | The line index corresponding to a console or vty line. These are preallocated by the system at startup. |
| LIN cadLineType | 1.3.6.1.4.1.4998.1.1.40.1.2.1.2 | LineType | read-only | The type (vty or console) of the access line. |
| T/F cadLineEnabled | 1.3.6.1.4.1.4998.1.1.40.1.2.1.3 | TruthValue | read-only | The status of the line. When enabled, the line is available for access to the C4. |
| I32 cadLineSessionTimeout | 1.3.6.1.4.1.4998.1.1.40.1.2.1.4 | Integer32 | read-only | Session length in seconds. The C4 automatically terminates the the session when this interval expires. A value of zero indicates no timeout. |
| I32 cadLineIdleTimeout | 1.3.6.1.4.1.4998.1.1.40.1.2.1.5 | Integer32 | read-only | Maximum idle time in seconds. The C4 automatically terminates the session if no I/O activity occurs within this interval. A value of zero indicates no timeout. |
| I32 cadLinePagination | 1.3.6.1.4.1.4998.1.1.40.1.2.1.6 | Integer32 | read-only | Number of lines of consecutive output to display before pausing and prompting the user. A value of zero indicates no pagination. |
| I32 cadLineBaud | 1.3.6.1.4.1.4998.1.1.40.1.2.1.7 | Integer32 | read-only | Baud rate in bits per second. This is applicable to console lines only and is saved in the eeprom. |
| OCT cadLinePassword | 1.3.6.1.4.1.4998.1.1.40.1.2.1.8 | OCTET STRING | read-only | The (encrypted) password associated with this line if line-based authentication is active. This is the line password. |
| STR cadLineLoginAuthMethodList | 1.3.6.1.4.1.4998.1.1.40.1.2.1.9 | SnmpAdminString | read-only | The authentication methods used in allowing login access on this line. This is a partial index into the cadAuthMethodTable. An empty string indicates no authentication is possible and effectively disables the line. |
| STR cadLineEnableAuthMethodList | 1.3.6.1.4.1.4998.1.1.40.1.2.1.10 | SnmpAdminString | read-only | The authentication methods used in allowing enable access on this line. This is a partial index into the cadAuthMethodTable. An empty string indicates no authentication is possible and effectively disables the line. |
| STR cadLineAuthorMethodList | 1.3.6.1.4.1.4998.1.1.40.1.2.1.11 | SnmpAdminString | read-only | The authorization methods used in allowing different privledge levels on this line. This is a partial index into the cadAuthorMethodTable. An empty string indicates no authorization is possible, in that case, authorization is equivalent to authentication. |
| STR cadLineShellAccountingMethodList | 1.3.6.1.4.1.4998.1.1.40.1.2.1.12 | SnmpAdminString | read-only | The method list used for shell accounting. An empty string indicates no command accounting is possible. |
| STR cadLineCommandAccountingMethodList | 1.3.6.1.4.1.4998.1.1.40.1.2.1.13 | SnmpAdminString | read-only | The method list used for command accounting. Accounting will be done only for commands whose privilege level is greater than or equal to cadLineCommandAccountingPrivilegeLevel. An empty string indicates no command accounting is possible. |
| ACC cadLineShellAccountingType | 1.3.6.1.4.1.4998.1.1.40.1.2.1.14 | AccountingType | read-only | Accounting type for shell accounting. The accounting type is used to decide whether accounting records are sent at the initiation and termination of a session or only at the termination of a session. |
| ACC cadLineCommandAccountingType | 1.3.6.1.4.1.4998.1.1.40.1.2.1.15 | AccountingType | read-only | Accounting type for command accounting. The accounting type is used to decide whether accounting records are sent at the initiation and termination of a command or only at the termination of a command. |
| I32 cadLineCommandAccountingPrivilegeLevel | 1.3.6.1.4.1.4998.1.1.40.1.2.1.16 | Integer32 | read-only | When command accounting is enabled, accounting records will be sent only for commands whose privilege level is greater than or equal to cadLineCommandAccountingPrivilegeLevel. |
| cadAuthorizationMethodTable | 1.3.6.1.4.1.4998.1.1.40.1.3 | not-accessible | A list of methods which are used in determining the type and sequence of authorization. | |
| cadAuthorizationMethodEntry | 1.3.6.1.4.1.4998.1.1.40.1.3.1 | not-accessible | Each row describes a single AAA method. Order is used in determining the sequence in which the methods are applied. | |
| STR cadAuthorizationListName | 1.3.6.1.4.1.4998.1.1.40.1.3.1.1 | SnmpAdminString | not-accessible | The name of the authorization method list. Each list can have a number of different authorization methods that are tried in order to authorize the command. |
| I32 cadAuthorizationListIndex | 1.3.6.1.4.1.4998.1.1.40.1.3.1.2 | Integer32 | not-accessible | The order in the authorization sequence when this method is used. A value of zero allows the snmp agent to choose the next hightest available index that preserves the list order. |
| AAA cadAuthorizationType | 1.3.6.1.4.1.4998.1.1.40.1.3.1.3 | AAAmethod | read-only | |
| STR cadAuthorizationGroup | 1.3.6.1.4.1.4998.1.1.40.1.3.1.4 | SnmpAdminString | read-only | The name of the group used in TACACS+ method. The default names of 'tac_default' represent the entire set of defined TACACS+ servers. |
| ROW cadAuthorizationRowStatus | 1.3.6.1.4.1.4998.1.1.40.1.3.1.5 | RowStatus | read-only | |
| cadAuthMethodTable | 1.3.6.1.4.1.4998.1.1.40.1.4 | not-accessible | A list of methods which are used in determining the type and sequence of authentication. | |
| cadAuthMethodEntry | 1.3.6.1.4.1.4998.1.1.40.1.4.1 | not-accessible | Each row describes a single AAA method. Order is used in determining the sequence in which the methods are applied. | |
| STR cadAuthListName | 1.3.6.1.4.1.4998.1.1.40.1.4.1.1 | SnmpAdminString | not-accessible | The name of the authentication method list. Each list can have a number of different authentication methods that are tried in order to authenticate the user. |
| I32 cadAuthListIndex | 1.3.6.1.4.1.4998.1.1.40.1.4.1.2 | Integer32 | not-accessible | The order in the authentication sequence when this method is used. A value of zero allows the snmp agent to choose the next hightest available index that preserves the list order. |
| AAA cadAuthType | 1.3.6.1.4.1.4998.1.1.40.1.4.1.3 | AAAmethod | read-only | |
| STR cadAuthGroup | 1.3.6.1.4.1.4998.1.1.40.1.4.1.4 | SnmpAdminString | read-only | The name of the group used in RADIUS/TACACS+ methods. The default names of 'default' and 'tac_default' represent the entire set of defined RADIUS and TACACS+ servers respectively. |
| ROW cadAuthRowStatus | 1.3.6.1.4.1.4998.1.1.40.1.4.1.5 | RowStatus | read-only | |
| cadAccountingMethodTable | 1.3.6.1.4.1.4998.1.1.40.1.5 | not-accessible | A list of methods which are used in determining the type and sequence of accounting. | |
| cadAccountingMethodEntry | 1.3.6.1.4.1.4998.1.1.40.1.5.1 | not-accessible | Each row describes a single AAA method. Order is used in determining the sequence in which the methods are applied. | |
| STR cadAccountingListName | 1.3.6.1.4.1.4998.1.1.40.1.5.1.1 | SnmpAdminString | not-accessible | The name of the accounting method list. Each list can have a number of different accounting methods that are tried in order to authorize the command. |
| I32 cadAccountingListIndex | 1.3.6.1.4.1.4998.1.1.40.1.5.1.2 | Integer32 | not-accessible | The order in the accounting sequence when this method is used. A value of zero allows the snmp agent to choose the next hightest available index that preserves the list order. |
| AAA cadAccountingType | 1.3.6.1.4.1.4998.1.1.40.1.5.1.3 | AAAmethod | read-create | |
| STR cadAccountingGroup | 1.3.6.1.4.1.4998.1.1.40.1.5.1.4 | SnmpAdminString | read-only | The name of the group used in TACACS+ method. The default names of 'tac_default' represent the entire set of defined TACACS+ servers. |
| ROW cadAccountingRowStatus | 1.3.6.1.4.1.4998.1.1.40.1.5.1.5 | RowStatus | read-only | |
| cadServerGroupTable | 1.3.6.1.4.1.4998.1.1.40.1.6 | not-accessible | ||
| cadServerGroupEntry | 1.3.6.1.4.1.4998.1.1.40.1.6.1 | not-accessible | This is the cross-reference table linking server group names used in authentication lists to the ordered set of individual servers. | |
| STR cadGroupName | 1.3.6.1.4.1.4998.1.1.40.1.6.1.1 | SnmpAdminString | not-accessible | Server Group name. The group name 'radius' includes all defined radius servers on the C4. |
| I32 cadGroupIndex | 1.3.6.1.4.1.4998.1.1.40.1.6.1.2 | Integer32 | not-accessible | Orders the group based on the order in which the servers were defined. A value of zero allows the snmp agent to choose the next largest available index that preserves the list order. |
| INT cadGroupType | 1.3.6.1.4.1.4998.1.1.40.1.6.1.3 | INTEGER | read-only | Orders the group based on the order in which the servers were defined. |
| ADR cadGroupIpAddress | 1.3.6.1.4.1.4998.1.1.40.1.6.1.4 | InetAddressIPv4or6 | read-only | Ip address of the AAA server. |
| I32 cadGroupPort | 1.3.6.1.4.1.4998.1.1.40.1.6.1.5 | Integer32 | read-only | Port number of the AAA server. |
| ROW cadGroupRowStatus | 1.3.6.1.4.1.4998.1.1.40.1.6.1.6 | RowStatus | read-only | |
| cadRadiusTable | 1.3.6.1.4.1.4998.1.1.40.1.7 | not-accessible | This table defines the configuration parameters of the RADIUS servers used for authentication by the C4. | |
| cadRadiusEntry | 1.3.6.1.4.1.4998.1.1.40.1.7.1 | not-accessible | ||
| ADR cadRadiusIpAddress | 1.3.6.1.4.1.4998.1.1.40.1.7.1.1 | InetAddressIPv4or6 | not-accessible | The IP address of the radius server host. |
| I32 cadRadiusAuthPort | 1.3.6.1.4.1.4998.1.1.40.1.7.1.2 | Integer32 | read-only | The UDP port to use for RADIUS authentication. |
| I32 cadRadiusAcctPort | 1.3.6.1.4.1.4998.1.1.40.1.7.1.3 | Integer32 | read-only | The UDP port to use for RADIUS accounting records. |
| I32 cadRadiusTimeout | 1.3.6.1.4.1.4998.1.1.40.1.7.1.4 | Integer32 | read-only | Time in seconds to wait between retransmissions of a RADIUS request. |
| I32 cadRadiusRetrans | 1.3.6.1.4.1.4998.1.1.40.1.7.1.5 | Integer32 | read-only | The number of retransmissions before declaring a RADIUS server dead. |
| OCT cadRadiusKey | 1.3.6.1.4.1.4998.1.1.40.1.7.1.7 | OCTET STRING | read-only | The shared secret used between the C4 and the RADIUS server. |
| I32 cadRadiusAuthServerIndex | 1.3.6.1.4.1.4998.1.1.40.1.7.1.8 | Integer32 | read-only | The index in the radiusAuthServerEntry table corresponding to this radius host. |
| ROW cadRadiusRowStatus | 1.3.6.1.4.1.4998.1.1.40.1.7.1.9 | RowStatus | read-only | |
| cadTacacsTable | 1.3.6.1.4.1.4998.1.1.40.1.8 | not-accessible | This table defines the configuration parameters of the TACACS+ servers used by the C4. | |
| cadTacacsEntry | 1.3.6.1.4.1.4998.1.1.40.1.8.1 | not-accessible | ||
| ADR cadTacacsIpAddress | 1.3.6.1.4.1.4998.1.1.40.1.8.1.1 | InetAddressIPv4or6 | not-accessible | The IP address of the TACACS+ server host. |
| I32 cadTacacsPort | 1.3.6.1.4.1.4998.1.1.40.1.8.1.2 | Integer32 | read-only | The TCP port to use for TACACS+ authentication. |
| I32 cadTacacsTimeout | 1.3.6.1.4.1.4998.1.1.40.1.8.1.3 | Integer32 | read-only | Time in seconds before TCP times out. |
| OCT cadTacacsKey | 1.3.6.1.4.1.4998.1.1.40.1.8.1.4 | OCTET STRING | read-only | The shared secret used between the C4 and the TACACS+ server. |
| T/F cadTacacsSingleConnect | 1.3.6.1.4.1.4998.1.1.40.1.8.1.5 | TruthValue | read-only | Indicates whether this TACACS+ server will support multiplexing of multiple sessions over a single TCP connection. |
| I32 cadTacacsServerIndex | 1.3.6.1.4.1.4998.1.1.40.1.8.1.6 | Integer32 | read-only | The index in the tacacsServerEntry table corresponding to this tacacs host. |
| ROW cadTacacsRowStatus | 1.3.6.1.4.1.4998.1.1.40.1.8.1.7 | RowStatus | read-only | |
| cadSshConfig | 1.3.6.1.4.1.4998.1.1.40.1.9 | |||
| T/F cadSshEnabled | 1.3.6.1.4.1.4998.1.1.40.1.9.1 | TruthValue | read-only | The current adminstative status of the SSH server. True implies the SSH server is active. |
| I32 cadSshPort | 1.3.6.1.4.1.4998.1.1.40.1.9.2 | Integer32 | read-only | Port on which the SSH server listens. |
| I32 cadSshSessionIdleTimeout | 1.3.6.1.4.1.4998.1.1.40.1.9.3 | Integer32 | read-only | Seconds the SSH server will allow an established connection to remain idle connection before terminating it. 0 implies an unlimited idle timeout. |
| I32 cadSshMaxClients | 1.3.6.1.4.1.4998.1.1.40.1.9.4 | Integer32 | read-only | Maximum number of active SSH clients allowed by the SSH server. 0 implies the upper range of 20. |
| T/F cadSshPasswordAuthEnabled | 1.3.6.1.4.1.4998.1.1.40.1.9.5 | TruthValue | read-only | True means that password authentication is allowed by the SSH server. False implies that public key authentication must be allowed. Setting this object fo false(2) will automatically cause cadSshPasswordAuthRequired to be set to false(2). |
| T/F cadSshPublicKeyAuthEnabled | 1.3.6.1.4.1.4998.1.1.40.1.9.6 | TruthValue | read-only | When true, the SSH server will allow clients to authenticate using a digital signature. If false, password authentication must be allowed. Setting this object to false(2) will automatically cause cadSshPublicKeyAuthRequired and cadSshPublicKeyAuthFirst to be set to false(2). |
| T/F cadSshCliLoginEnabled | 1.3.6.1.4.1.4998.1.1.40.1.9.7 | TruthValue | read-only | When true, the SSH server will allow clients to login into the CLI. |
| T/F cadSshSecureFtpEnabled | 1.3.6.1.4.1.4998.1.1.40.1.9.8 | TruthValue | read-only | When true, the SSH server will allow clients to establish secure ftp sessions. |
| PEM cadSshPublicKey | 1.3.6.1.4.1.4998.1.1.40.1.9.11 | PemKey | read-only | The SSH server's public key. |
| PEM cadSshPrivateKey | 1.3.6.1.4.1.4998.1.1.40.1.9.12 | PemKey | read-only | The SSH server private key |
| SSH cadSshCiphers | 1.3.6.1.4.1.4998.1.1.40.1.9.13 | SshCipher | read-only | SSH message encryption ciphers |
| T/F cadSshPortForwardingEnabled | 1.3.6.1.4.1.4998.1.1.40.1.9.14 | TruthValue | read-only | Set this object to true(1) if SSH port forwarding is to be enabled. Otherwise, this object should be false(2) if SSH port forwarding is disabled. |
| T/F cadSshPasswordAuthRequired | 1.3.6.1.4.1.4998.1.1.40.1.9.15 | TruthValue | read-only | If cadSshPasswordAuthEnabled is set to true(1), then setting cadSshPasswordAuthRequired to true(1) instructs the SSH server to require password authentication from connecting clients. If cadSshPasswordAuthEnabled is set to true(1) and this object it set to false(2), then password authentication may not be necessary as long as cadSshPublicAuthEnabled is set to true(1). Otherwise, if cadSshPasswordAuthEnabled is set to false(2), any attempt to set cadSshPasswordAuthRequired to true(1) will be rejected. |
| T/F cadSshPublicKeyAuthRequired | 1.3.6.1.4.1.4998.1.1.40.1.9.16 | TruthValue | read-only | If cadSshPublicKeyAuthEnabled is set to true(1), then setting cadSshPublicKeyAuthRequired to true(1) instructs the SSH server to require public key authentication from connecting clients. If cadSshPublicKeyAuthRequired is set to true(1) and this object it set to false(2), then public key authentication may not be necessary as long as cadSshPasswordAuthEnabled is set to true(1). Otherwise, if cadSshPublicKeyAuthEnabled is set to false(2), any attempt to set cadSshPublicKeyAuthRequired to true(1) will be rejected. Setting this object to false(2) will automatically cause cadSshPublicKeyAuthFirst to be set to false(2). |
| T/F cadSshPublicKeyAuthFirst | 1.3.6.1.4.1.4998.1.1.40.1.9.17 | TruthValue | read-only | If both cadSshPublicKeyAuthEnabled and cadSshPublicKeyAuthRequired are set to true(1), then this object may set to true(1). Otherwise, attempts to set this object to true(1) will fail. If set to true(1) and cadSshPasswordAuthRequired is set to true, then the SSH server will required public key authentication to preceed password authentication. |
| U32 cadSshMaxAuthFailures | 1.3.6.1.4.1.4998.1.1.40.1.9.18 | Unsigned32 | read-only | The SSH server will reject clients who fail to authorize after this many attempts. |
| SSH cadSshServerKeyType | 1.3.6.1.4.1.4998.1.1.40.1.9.19 | SshKeyType | read-only | The SSH server key type (DSA-1024 or RSA-2048). |
| SSH cadSshKeyExchange | 1.3.6.1.4.1.4998.1.1.40.1.9.20 | SshKeyExchangeMethod | read-only | The SSH server key exhange method. |
| cadPasswordTable | 1.3.6.1.4.1.4998.1.1.40.1.10 | not-accessible | This table reflects the local user passwords defined for the C4. | |
| cadPasswordEntry | 1.3.6.1.4.1.4998.1.1.40.1.10.1 | not-accessible | ||
| STR cadPassUser | 1.3.6.1.4.1.4998.1.1.40.1.10.1.1 | SnmpAdminString | not-accessible | Local user name defined on the C4. |
| OCT cadPassPassword | 1.3.6.1.4.1.4998.1.1.40.1.10.1.2 | OCTET STRING | read-only | Encrypted password for local user defined on the C4. |
| INT cadPassAuthLevel | 1.3.6.1.4.1.4998.1.1.40.1.10.1.3 | INTEGER | read-only | Authorization level for this user account. |
| PEM cadPassPublicKey | 1.3.6.1.4.1.4998.1.1.40.1.10.1.4 | PemKey | read-only | User's public key for use by SSH |
| ROW cadPassRowStatus | 1.3.6.1.4.1.4998.1.1.40.1.10.1.5 | RowStatus | read-only | |
| cadEnablePasswordTable | 1.3.6.1.4.1.4998.1.1.40.1.11 | not-accessible | This table reflects the local enable passwords defined for various privilege levels. | |
| cadEnablePasswordEntry | 1.3.6.1.4.1.4998.1.1.40.1.11.1 | not-accessible | ||
| INT cadPrivilegeLevel | 1.3.6.1.4.1.4998.1.1.40.1.11.1.1 | INTEGER | not-accessible | Privilege level. |
| OCT cadEnablePassword | 1.3.6.1.4.1.4998.1.1.40.1.11.1.2 | OCTET STRING | read-only | Encrypted enable password associated with the privilege level. |
| ROW cadEnablePasswordRowStatus | 1.3.6.1.4.1.4998.1.1.40.1.11.1.3 | RowStatus | read-only | |
| cadCLIcommandPrivilegeLevelTable | 1.3.6.1.4.1.4998.1.1.40.1.12 | |||
| cadSshStatus | 1.3.6.1.4.1.4998.1.1.40.1.13 | |||
| STR cadSshServerVersion | 1.3.6.1.4.1.4998.1.1.40.1.13.1 | SnmpAdminString | read-only | The current version information for this C4 SSH server. |
| SSH cadSshOfferedProtocols | 1.3.6.1.4.1.4998.1.1.40.1.13.2 | SshProtocol | read-only | SSH Protocols available on this C4 SSH server. |
| T/F cadSshServerRunning | 1.3.6.1.4.1.4998.1.1.40.1.13.3 | TruthValue | read-only | If true, the C4 SSH server is active. |
| cadSshSessionTable | 1.3.6.1.4.1.4998.1.1.40.1.13.4 | not-accessible | This table defines the configuration parameters of the RADIUS servers used for authentication by the C4. | |
| cadSshSessionEntry | 1.3.6.1.4.1.4998.1.1.40.1.13.4.1 | not-accessible | ||
| I32 cadSshSessionIndex | 1.3.6.1.4.1.4998.1.1.40.1.13.4.1.1 | Integer32 | not-accessible | The session index corresponding to a SSH session. These are preallocated by the system at startup. |
| I32 cadSshConnectionId | 1.3.6.1.4.1.4998.1.1.40.1.13.4.1.2 | Integer32 | read-only | The connection identifier for this SSH session. |
| STR cadSshUser | 1.3.6.1.4.1.4998.1.1.40.1.13.4.1.3 | SnmpAdminString | read-only | |
| ADR cadSshClientIpAddr | 1.3.6.1.4.1.4998.1.1.40.1.13.4.1.4 | InetAddressIPv4or6 | read-only | The client IP address. |
| SSH cadSshServiceType | 1.3.6.1.4.1.4998.1.1.40.1.13.4.1.5 | SshService | read-only | |
| SSH cadSshAuthMethod | 1.3.6.1.4.1.4998.1.1.40.1.13.4.1.6 | SshAuthMethod | read-only | The authentication method for this session. |
| SSH cadSshCipherType | 1.3.6.1.4.1.4998.1.1.40.1.13.4.1.7 | SshCipherType | read-only | |
| SSH cadSshMacAlg | 1.3.6.1.4.1.4998.1.1.40.1.13.4.1.8 | SshMacAlg | read-only | |
| STR cadSshClientSw | 1.3.6.1.4.1.4998.1.1.40.1.13.4.1.9 | SnmpAdminString | read-only | |
| ROW cadSshSessionRowStatus | 1.3.6.1.4.1.4998.1.1.40.1.13.4.1.10 | RowStatus | read-only | |
| cadCLIcommandPrivilegeTable | 1.3.6.1.4.1.4998.1.1.40.1.14 | not-accessible | This table reflects the mapping of CLI commands to privilege levels. | |
| cadCLIcommandPrivilegeEntry | 1.3.6.1.4.1.4998.1.1.40.1.14.1 | not-accessible | ||
| CMD cadCLIcommandPrivilegeNodeAddr | 1.3.6.1.4.1.4998.1.1.40.1.14.1.1 | CmdNode | not-accessible | Address of the command node that uniquely identifies a CLI command. |
| STR cadCLIcommandPrivilegeCommand | 1.3.6.1.4.1.4998.1.1.40.1.14.1.2 | DisplayString | not-accessible | Fully expanded CLI command text that uniquely identifies this command node. |
| INT cadCLIcommandPrivilegeOriginalLevel | 1.3.6.1.4.1.4998.1.1.40.1.14.1.3 | INTEGER | read-create | Original privilege level defined at compile time. |
| INT cadCLIcommandPrivilegeNewLevel | 1.3.6.1.4.1.4998.1.1.40.1.14.1.4 | INTEGER | read-create | Configured privilege level that overrides cadCLIcommandPrivilegeOriginalLevel |
| ROW cadCLIcommandPrivilegeRowStatus | 1.3.6.1.4.1.4998.1.1.40.1.14.1.5 | RowStatus | read-create | Control object for this row |
| cadAAAConformance | 1.3.6.1.4.1.4998.1.1.40.1.20 | |||
| cadAAAGroups | 1.3.6.1.4.1.4998.1.1.40.1.20.1 | |||
| cadAAALineGroup | 1.3.6.1.4.1.4998.1.1.40.1.20.1.1 | This group defines line configuration for the C4. | ||
| cadAAAMethodGroup | 1.3.6.1.4.1.4998.1.1.40.1.20.1.2 | This group defines the AAA methods for the C4. | ||
| cadAAAServerGroup | 1.3.6.1.4.1.4998.1.1.40.1.20.1.3 | This group defines the server cross reference group for AAA. | ||
| cadAAAProtocolGroup | 1.3.6.1.4.1.4998.1.1.40.1.20.1.4 | This group defines AAA protocol information for the C4. | ||
| cadAAASshGroup | 1.3.6.1.4.1.4998.1.1.40.1.20.1.5 | This group defines AAA SSH information for the C4. | ||
| cadAAAPasswordGroup | 1.3.6.1.4.1.4998.1.1.40.1.20.1.6 | This group defines AAA local password information for the C4. | ||
| cadAAAEnableGroup | 1.3.6.1.4.1.4998.1.1.40.1.20.1.7 | This group defines AAA local enable password information for the C4. | ||
| cadAAACompliances | 1.3.6.1.4.1.4998.1.1.40.1.20.2 | |||
| cadAAACompliance | 1.3.6.1.4.1.4998.1.1.40.1.20.2.1 | The compliance statement |
RFC description
Cadant Inc. enterprise MIB for managing Authentication, Authorization, and Accounting (AAA) functionality on Cadant CMTS and network equipment.
Start monitoring ARRIS/Cadant C4/E6000 CMTS (cable modem termination system) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.