C-PRODUCT-DS3-MIB

All MIBs › C-PRODUCT-DS3-MIB

Category: WAN

Description: Monitors and configures DS3 interface parameters on C-PRODUCT WAN access devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is C-PRODUCT-DS3-MIB?

C-PRODUCT-DS3-MIB is a legacy proprietary MIB (built on C-PRODUCT-BASE-MIB/C-PRODUCT-GROUP-MIB) reporting DS3 (ATM-over-DS3) port configuration and cell statistics. Its port table, keyed by index, records loopback type/length, peak rate, framing, cell map, scrambling, timing (line/PLCP/CTX), FEAC loopback, and line rate, while a stats table records RX/TX cells, idle-unassigned cells, HCS-error cells, reset time/date, a reset-stats action, and RX/TX utilization, with a companion clear-stats table. As a configuration/performance MIB it lets an administrator confirm DS3 framing/loopback configuration and watch cell error rates on this legacy ATM-over-DS3 device. It is deployed on legacy ATM-over-DS3 networking equipment. Engineers can download the C-PRODUCT-DS3-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in C-PRODUCT-DS3-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Legacy ATM-over-DS3 networking equipment

Monitoring Examples

An administrator checks ds3PortHCSErrorCells and ds3PortLoopbackType to diagnose a DS3 ATM cell-error problem on this legacy device.

What Can Be Monitored

DS3 port framing/loopback configuration and cell error rates

Imported Objects

From C-PRODUCT-BASE-MIB

TimeAndDate
portNumber	OBJECT-TYPE
portSlot	OBJECT-TYPE

From C-PRODUCT-GROUP-MIB

ds3card

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Gauge

OIDs

OID symbolic	OID numeric	Type	Access	Description
ds3Port	1.3.6.1.4.1.43.1.12.3.1.1.11.1
ds3PortTable	1.3.6.1.4.1.43.1.12.3.1.1.11.1.1		not-accessible	The DS3 port information table.
ds3PortEntry	1.3.6.1.4.1.43.1.12.3.1.1.11.1.1.1		not-accessible	Information about a DS3 port.
INT ds3PortLoopbackType	1.3.6.1.4.1.43.1.12.3.1.1.11.1.1.1.1	INTEGER	read-write	Loopback type of the DS3 port.
INT ds3PortLboLength	1.3.6.1.4.1.43.1.12.3.1.1.11.1.1.1.2	INTEGER	read-write	Cable length for the DS3 port.
INT ds3PortPeakRate	1.3.6.1.4.1.43.1.12.3.1.1.11.1.1.1.3	INTEGER	read-write	Peak data transfer rate of the DS3 port. Unit: Mbps.
INT ds3PortFraming	1.3.6.1.4.1.43.1.12.3.1.1.11.1.1.1.4	INTEGER	read-write	Cbit or M23 framing for the DS3 port.
INT ds3PortCellMap	1.3.6.1.4.1.43.1.12.3.1.1.11.1.1.1.5	INTEGER	read-write	ATM cell mapping for the DS3 port.
INT ds3PortScramble	1.3.6.1.4.1.43.1.12.3.1.1.11.1.1.1.6	INTEGER	read-write	ATM payload scrambling for the DS3 port.
INT ds3PortTiming	1.3.6.1.4.1.43.1.12.3.1.1.11.1.1.1.7	INTEGER	read-write	DS3 timing source.
INT ds3PortPlcpTiming	1.3.6.1.4.1.43.1.12.3.1.1.11.1.1.1.8	INTEGER	read-write	PLCP timing source for the DS3 port.
INT ds3PortCtxTiming	1.3.6.1.4.1.43.1.12.3.1.1.11.1.1.1.9	INTEGER	read-write	CTX timing source from the DS3 port.
INT ds3PortFeacLoopback	1.3.6.1.4.1.43.1.12.3.1.1.11.1.1.1.10	INTEGER	read-write	FEAC loopback for the DS3 port.
INT ds3PortLineRate	1.3.6.1.4.1.43.1.12.3.1.1.11.1.1.1.11	INTEGER	read-only	Physical Line data transfer rate of the DS3 port. Unit: CPS.
ds3PortStats	1.3.6.1.4.1.43.1.12.3.1.1.11.2
ds3PortStatsTable	1.3.6.1.4.1.43.1.12.3.1.1.11.2.1		not-accessible	The DS3 port stats information table.
ds3PortStatsEntry	1.3.6.1.4.1.43.1.12.3.1.1.11.2.1.1		not-accessible	Information about a DS3 port stats.
GAU ds3PortRxCells	1.3.6.1.4.1.43.1.12.3.1.1.11.2.1.1.1	Gauge	read-only	The counter associated with the received cells, encountered on the ATM interface.
GAU ds3PortTxCells	1.3.6.1.4.1.43.1.12.3.1.1.11.2.1.1.2	Gauge	read-only	The counter associated with the transmitted cells, encountered on the ATM interface.
GAU ds3PortIdleUnassignedCells	1.3.6.1.4.1.43.1.12.3.1.1.11.2.1.1.3	Gauge	read-only	The counter associated with the idle/unassigned cells, encountered on the ATM interface.
GAU ds3PortHCSErrorCells	1.3.6.1.4.1.43.1.12.3.1.1.11.2.1.1.4	Gauge	read-only	The counter associated with the HCS errored cells, encountered on the ATM interface.
TIM ds3PortResetTimeDate	1.3.6.1.4.1.43.1.12.3.1.1.11.2.1.1.5	TimeAndDate	read-only	The reset time and date of ATM stats on this ATM interface.
INT ds3PortResetStats	1.3.6.1.4.1.43.1.12.3.1.1.11.2.1.1.6	INTEGER	write-only	This field is used to reset the atm statistics for the ds3 port. If a get is performed on this command, the result will always be zero
INT ds3PortUtilRxCells	1.3.6.1.4.1.43.1.12.3.1.1.11.2.1.1.7	INTEGER	read-only	The Utilization of received Cell is calculated as received cells divided by Line Rate.
INT ds3PortUtilTxCells	1.3.6.1.4.1.43.1.12.3.1.1.11.2.1.1.8	INTEGER	read-only	The Utilization of transmitted Cell is calculated as transmitted cells divided by Line Rate.
ds3PortClearStats	1.3.6.1.4.1.43.1.12.3.1.1.11.3
ds3PortClearStatsTable	1.3.6.1.4.1.43.1.12.3.1.1.11.3.1		not-accessible	This table is used to reset the performance monitoring data for ds3 port.
ds3PortClearStatsEntry	1.3.6.1.4.1.43.1.12.3.1.1.11.3.1.1		not-accessible	Information about a DS3 port.
INT ds3PortResetPMData	1.3.6.1.4.1.43.1.12.3.1.1.11.3.1.1.1	INTEGER	write-only	This field is used to reset the performance monitoring data for the ds3 port. If a get is performed on this command, the result will always be zero

RFC description

DS3 port configuration and statistics including loopback, framing, timing, and line rate parameters.

Start monitoring Networking equipment with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download C-PRODUCT-DS3-MIB

What Is C-PRODUCT-DS3-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description