MITEL-PPPGROUP-MIB

All MIBs › MITEL-PPPGROUP-MIB

Organization: MITEL Corporation

Last Updated: 2003-03-24

Category: WAN

Description: Manages MITEL PPP interface group configuration and link negotiation state.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is MITEL-PPPGROUP-MIB?

MITEL-PPPGROUP-MIB is a Mitel proprietary MIB (under mitelPropIpNetworking) that manages configuration of PPP interface groups on Mitel networking/voice-gateway devices, covering negotiation order, dynamic IP address assignment, DNS/WINS handling, and per-remote-peer link configuration. It exposes group-wide settings (mitelGblGrpNegotiateFirst, mitelGblGrpDynamicIpAddr, mitelGblGrpDynamicIpAdrrHoldoff, WINS server addresses) plus a remote-peer configuration table (mitelPppGrpRemoteConfigTable) tracking per-connection IP handling and row status. Monitoring this MIB reveals the software-configured and operational state of PPP links — whether dynamic addressing settings are correctly applied and whether individual remote-peer entries remain active via mitelRmtCfgTableStatus — useful for diagnosing failed or misconfigured PPP dial-up or WAN links rather than hardware sensor telemetry. No specific external MIB dependency is called out, though it builds on standard PPP negotiation concepts. It is typically deployed on Mitel WAN/voice gateways using PPP-based dial-up or leased-line connectivity. Engineers can download the MITEL-PPPGROUP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in MITEL-PPPGROUP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Mitel WAN gateway / voice gateway with PPP interfaces

Monitoring Examples

An administrator polls mitelPppGrpRemoteConfigTable to check mitelRmtCfgTableStatus and mitelRmtCfgTableIpAddrHandling for each remote peer entry; a peer stuck in a non-active row status alongside a stale mitelRmtCfgTableRemIpAddr indicates a PPP link that failed negotiation, while mitelGblGrpDynamicIpAddr and its holdoff timer reveal whether dynamic address assignment is properly throttled group-wide.

What Can Be Monitored

PPP negotiation order
dynamic IP address pool usage
remote peer connection/row status
DNS/WINS server configuration
per-peer IP address handling

Imported Objects

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
enterprises

From SNMPv2-TC

RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
mitel	1.3.6.1.4.1.1027
mitelProprietary	1.3.6.1.4.1.1027.4
mitelPropIpNetworking	1.3.6.1.4.1.1027.4.8
mitelIpNetRouter	1.3.6.1.4.1.1027.4.8.1
mitelRouterPppGroup	1.3.6.1.4.1.1027.4.8.1.2			The MITEL PPP MIB module.
mitelPppGrpGlobalGroup	1.3.6.1.4.1.1027.4.8.1.2.1
INT mitelGblGrpNegotiateFirst	1.3.6.1.4.1.1027.4.8.1.2.1.1	INTEGER	read-write	This attribute defines which PPP authentication protocol is negotiated first on incoming call. DEFAULT = chap
IP mitelGblGrpDynamicIpAddr	1.3.6.1.4.1.1027.4.8.1.2.1.2	IpAddress	read-write	This attribute defines the start address of the dynamic addres pool.
INT mitelGblGrpNumDynamicIpAddr	1.3.6.1.4.1.1027.4.8.1.2.1.3	INTEGER	read-write	This attribute defines the number of dynamic IP addresses in the pool.
INT mitelGblGrpDynamicIpAdrrHoldoff	1.3.6.1.4.1.1027.4.8.1.2.1.4	INTEGER	read-write	This attribute defines the time in seconds before the same IP address can be reused after a call has been disconnected.
INT mitelGblGrpRemDnsIpAddrHandling	1.3.6.1.4.1.1027.4.8.1.2.1.5	INTEGER	read-write	This attribute determines wether the system can accept or override the DNS IP address submitted by a remote system. DEFAULT = accept. Override has been superceded by overridewith.
IP mitelGblGrpPrimaryWinsServerIpAddr	1.3.6.1.4.1.1027.4.8.1.2.1.6	IpAddress	read-write	This attribute defines the Primary WINS server IP address of your Network.
IP mitelGblGrpSecondaryWinsServerIpAddr	1.3.6.1.4.1.1027.4.8.1.2.1.7	IpAddress	read-write	This attribute defines the Secondary WINS server IP address of your Network.
mitelPppGrpRemoteConfigTable	1.3.6.1.4.1.1027.4.8.1.2.2		not-accessible	This table contains objects that pertain to the management of remote LANs that use the PPP Internet standard link protocol.
mitelPppGrpRemoteConfigEntry	1.3.6.1.4.1.1027.4.8.1.2.2.1		not-accessible	A default entry at conceptual row zero does exist in this table. The default entry can be used to specify the PPP authentication protocol only.
I32 mitelRmtCfgTableIndex	1.3.6.1.4.1.1027.4.8.1.2.2.1.1	Integer32	read-only	This object uniquely identifies this object
INT mitelRmtCfgTableIpAddrHandling	1.3.6.1.4.1.1027.4.8.1.2.2.1.2	INTEGER	read-write	This attribute determines wether the system can accept or override the DNS IP address submitted by a remote system. DEFAULT = accept.
IP mitelRmtCfgTableRemIpAddr	1.3.6.1.4.1.1027.4.8.1.2.2.1.3	IpAddress	read-write	The IP address to assign to remote if mitelRmtCfgTableIPAddrHandling is set to assign(3)
ROW mitelRmtCfgTableStatus	1.3.6.1.4.1.1027.4.8.1.2.2.1.4	RowStatus	read-create	The current status of this entry.
INT mitelRmtCfgTablePppMode	1.3.6.1.4.1.1027.4.8.1.2.2.1.5	INTEGER	read-write	The mode PPP will be using for the given destination.
mitelPppGrpPppOverEthernetTable	1.3.6.1.4.1.1027.4.8.1.2.3		not-accessible	Table containing the configuration items needed by the PPPoE stack.
mitelPppGrpPppOverEthernetEntry	1.3.6.1.4.1.1027.4.8.1.2.3.1		not-accessible	PPPoE information
I32 mitelPppOEthTableIndex	1.3.6.1.4.1.1027.4.8.1.2.3.1.1	Integer32	read-write	Unique Identifier for an entry in PPP over Ethernet Table.
INT mitelPppOEthTableEnabled	1.3.6.1.4.1.1027.4.8.1.2.3.1.2	INTEGER	read-write	Is this PPPoE instance enabled or not.
INT mitelPppOEthTablePacketTimeout	1.3.6.1.4.1.1027.4.8.1.2.3.1.3	INTEGER	read-write	The time to wait, in seconds, for a valid response to a discovery packet before resending it. Warning: this value is doubled ever time a packet is resent.
INT mitelPppOEthTablePacketRetries	1.3.6.1.4.1.1027.4.8.1.2.3.1.4	INTEGER	read-write	The number of times to resend discovery packets before giving up on the negotiation.
INT mitelPppOEthTableTotalRetries	1.3.6.1.4.1.1027.4.8.1.2.3.1.5	INTEGER	read-write	The RFC states that failure to receive a valid PADS packet should restart the negotiation. This count stops the system retrying indefinitely on duff PADS packets by capping the total number of retry attempts.
OCT mitelPppOEthTableServiceName	1.3.6.1.4.1.1027.4.8.1.2.3.1.6	OCTET STRING	read-write	The service we wish to request from the remote access concentrator. Examples of the use of the service name are to indicate an ISP or a class or quality of service. An empty string indicates any service.
OCT mitelPppOEthTableACName	1.3.6.1.4.1.1027.4.8.1.2.3.1.7	OCTET STRING	read-write	Description of the remote access concentrator we wish to connect to. An empty string indicates no preference.
ROW mitelPppOEthTableStatus	1.3.6.1.4.1.1027.4.8.1.2.3.1.8	RowStatus	read-create	The entry's row status.

RFC description

Point-to-Point Protocol (PPP) global settings and authentication configuration for MITEL routers.

Start monitoring Mitel WAN gateway / voice gateway with PPP interfaces with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download MITEL-PPPGROUP-MIB

What Is MITEL-PPPGROUP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description