All MIBs › BROTHER-MIB
Category: Printer and Finishing
Description: Monitors Brother Industries printer device status, consumable levels, and print job counters.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is BROTHER-MIB?
BROTHER-MIB is a Brother Industries enterprise MIB for monitoring Brother printer and multifunction devices, covering print-mechanism status, consumable levels, and print-job/fax counters. It exposes categories such as paper-jam location, toner-low indicators for up to four toner stations (color/multi-toner models), IEEE 1284 device identification, and speed-dial/one-touch-dial configuration tables used by fax-capable models. Its monitoring focus is heavily on hardware and consumable status: brJamPlace pinpoints where a paper jam occurred, brToner1Low through brToner4Low flag consumables approaching depletion, and related counters track job/page activity, making this a classic device-health and supplies-monitoring MIB for print fleets. It builds on the standard Printer MIB (RFC 1759) conventions common across vendors, supplementing it with Brother-specific objects. It is typically deployed in offices and print-fleet management systems monitoring Brother laser/inkjet printers and all-in-one fax/copier/scanner units. Engineers can download the BROTHER-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in BROTHER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Brother printer/multifunction (print/fax/copy/scan) device
Monitoring Examples
A print-fleet monitoring tool would poll brToner1Low through brToner4Low to catch a toner cartridge nearing empty before it causes a failed print job, and check brJamPlace to pinpoint exactly where a paper jam occurred (e.g. input tray vs. fuser) for faster service dispatch. On fax-capable models, walking the brOneTouchDialTable/brOneTouchDialEntry (indexed by brOneTouchDialIndex, holding brOneTouchDialData) would let an administrator audit configured speed-dial numbers, while brieee1284id confirms the device's reported model/identity string.
What Can Be Monitored
- toner level status (per station)
- paper jam location
- one-touch/speed-dial configuration
- device identification (IEEE 1284 ID)
This MIB depends on
Related MIBs
Imported Objects
From IPV6-TC
| Ipv6Address |
From RFC-1212
| OBJECT-TYPE |
From RFC1155-SMI
| Counter | |
| IpAddress | |
| enterprises |
From RFC1213-MIB
| DisplayString |
From SNMPv2-TC
| DateAndTime |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| brother | 1.3.6.1.4.1.2435 | |||
| nm | 1.3.6.1.4.1.2435.2 | |||
| system | 1.3.6.1.4.1.2435.2.3 | |||
| net_peripheral | 1.3.6.1.4.1.2435.2.3.9 | |||
| net_printer | 1.3.6.1.4.1.2435.2.3.9.1 | |||
| generalDeviceStatus | 1.3.6.1.4.1.2435.2.3.9.1.1 | |||
| status | 1.3.6.1.4.1.2435.2.3.9.1.1.2 | |||
| INT brJamPlace | 1.3.6.1.4.1.2435.2.3.9.1.1.2.9 | INTEGER | read-only | Location of JAM. 0:No Jam 1:Jam Trays 2:Jam Inside 3:Jam Rear 4:Jam Duplex unit |
| tonerlow | 1.3.6.1.4.1.2435.2.3.9.1.1.2.10 | |||
| INT brToner1Low | 1.3.6.1.4.1.2435.2.3.9.1.1.2.10.1 | INTEGER | read-only | Black Toner status. 0:Toner Full 1:Toner Low 2:No Toner Cartridge 3:Toner Empty |
| INT brToner2Low | 1.3.6.1.4.1.2435.2.3.9.1.1.2.10.2 | INTEGER | read-only | Cyan Toner status. 0:Toner Ready 1:Toner Low 2:No Toner Cartridge 3:Toner Empty |
| INT brToner3Low | 1.3.6.1.4.1.2435.2.3.9.1.1.2.10.3 | INTEGER | read-only | Magenta Toner status. 0:Toner Ready 1:Toner Low 2:No Toner Cartridge 3:Toner Empty |
| INT brToner4Low | 1.3.6.1.4.1.2435.2.3.9.1.1.2.10.4 | INTEGER | read-only | Yellow Toner status. 0:Toner Ready 1:Toner Low 2:No Toner Cartridge 3:Toner Empty |
| OCT brieee1284id | 1.3.6.1.4.1.2435.2.3.9.1.1.7 | OCTET STRING | read-only | IEEE1284 device ID |
| INT brttt1 | 1.3.6.1.4.1.2435.2.3.9.1.1.10 | INTEGER | read-only | unused |
| net_MFP | 1.3.6.1.4.1.2435.2.3.9.2 | |||
| fax_setup | 1.3.6.1.4.1.2435.2.3.9.2.1 | |||
| autodial | 1.3.6.1.4.1.2435.2.3.9.2.1.1 | |||
| onetouchDial | 1.3.6.1.4.1.2435.2.3.9.2.1.1.1 | |||
| INT brOneTouchDialCount | 1.3.6.1.4.1.2435.2.3.9.2.1.1.1.1 | INTEGER | read-only | Maximum number of One touch dial. |
| brOneTouchDialTable | 1.3.6.1.4.1.2435.2.3.9.2.1.1.1.2 | not-accessible | This table represents One touch dial. | |
| brOneTouchDialEntry | 1.3.6.1.4.1.2435.2.3.9.2.1.1.1.2.1 | not-accessible | A row in the OneTouchDial table. Rows cannot be created or deleted. | |
| INT brOneTouchDialIndex | 1.3.6.1.4.1.2435.2.3.9.2.1.1.1.2.1.1 | INTEGER | read-only | The One touch dial number. |
| OCT brOneTouchDialData | 1.3.6.1.4.1.2435.2.3.9.2.1.1.1.2.1.2 | OCTET STRING | read-write | The One Touch dial data. |
| speedDial | 1.3.6.1.4.1.2435.2.3.9.2.1.1.2 | |||
| INT brSpeedDialCount | 1.3.6.1.4.1.2435.2.3.9.2.1.1.2.1 | INTEGER | read-only | Maximum number of Speed dial. |
| brSpeedDialTable | 1.3.6.1.4.1.2435.2.3.9.2.1.1.2.2 | not-accessible | This table represents Speed dial. | |
| brSpeedDialEntry | 1.3.6.1.4.1.2435.2.3.9.2.1.1.2.2.1 | not-accessible | A row in the speedDial table. Rows cannot be created or deleted. | |
| INT brSpeedDialIndex | 1.3.6.1.4.1.2435.2.3.9.2.1.1.2.2.1.1 | INTEGER | read-only | The Speed dial number. |
| OCT brSpeedDialData | 1.3.6.1.4.1.2435.2.3.9.2.1.1.2.2.1.2 | OCTET STRING | read-write | The Speed dial Data. |
| INT brDialDataAllClear | 1.3.6.1.4.1.2435.2.3.9.2.1.1.3 | INTEGER | read-write | Clear the all data of Onetouch dial and Speed dial. |
| fax_general | 1.3.6.1.4.1.2435.2.3.9.2.1.2 | |||
| INT brFaxReceiveMode | 1.3.6.1.4.1.2435.2.3.9.2.1.2.1 | INTEGER | read-write | Fax Receive Mode 0:Auto 1:Manual 2:FaxTel 3:TAD |
| INT brRingDelayCount | 1.3.6.1.4.1.2435.2.3.9.2.1.2.2 | INTEGER | read-write | Ring Delay Count |
| OCT brOwnFaxNumber | 1.3.6.1.4.1.2435.2.3.9.2.1.2.3 | OCTET STRING | read-write | Own Fax Number |
| scanner_setup | 1.3.6.1.4.1.2435.2.3.9.2.11 | |||
| scanToInfo | 1.3.6.1.4.1.2435.2.3.9.2.11.1 | |||
| OCT brRegisterKeyInfo | 1.3.6.1.4.1.2435.2.3.9.2.11.1.1 | OCTET STRING | read-write | Add the ScanTo information. If device receives GET request, device should reply fix value TRUE(writable), FALSE(not writable) to the client. |
| OCT brUnRegisterKeyInfo | 1.3.6.1.4.1.2435.2.3.9.2.11.1.2 | OCTET STRING | read-write | Remove the ScanTo information. If device receives GET request, device should reply fix value TRUE (writable), FALSE (not writable) to the client. |
| OCT brNetSKeyReceiverAddress | 1.3.6.1.4.1.2435.2.3.9.2.11.1.5 | OCTET STRING | read-write | IP Address or the name of the S-Key Receiver. |
| mfpCapability | 1.3.6.1.4.1.2435.2.3.9.2.101 | |||
| mcGeneral | 1.3.6.1.4.1.2435.2.3.9.2.101.1 | |||
| mcgRemoteSetup | 1.3.6.1.4.1.2435.2.3.9.2.101.1.11 | |||
| INT brNetRemoteSetUpSupported | 1.3.6.1.4.1.2435.2.3.9.2.101.1.11.1 | INTEGER | read-only | 0 indicates the Net Remote Setup function is not supported. 1 indicates the Net Remote Setup function is implemented by the firmware |
| INT brNetRemoteSetUpEnable | 1.3.6.1.4.1.2435.2.3.9.2.101.1.11.2 | INTEGER | read-write | 0 indicates the Net Remote Setup is not enabled. 1 indicates that the Net Remote Setup is enabled. Writing a non-zero value will enable the Net Remote Setup if it is supported by the firmware. |
| INT brNetRemoteSetUpFileFormat | 1.3.6.1.4.1.2435.2.3.9.2.101.1.11.3 | INTEGER | read-only | It is a file format of the Net Remote Setup function. |
| mcFax | 1.3.6.1.4.1.2435.2.3.9.2.101.2 | |||
| mcfGeneral | 1.3.6.1.4.1.2435.2.3.9.2.101.2.1 | |||
| INT brFaxSupported | 1.3.6.1.4.1.2435.2.3.9.2.101.2.1.1 | INTEGER | read-only | 0 indicates the Fax function is not supported. 1 indicates the Fax function is implemented by the firmware |
| INT brIFaxSupported | 1.3.6.1.4.1.2435.2.3.9.2.101.2.1.3 | INTEGER | read-only | 0 indicates the IFax function is not supported. 1 indicates the IFax function is implemented by the firmware |
| mcfNetFaxShare | 1.3.6.1.4.1.2435.2.3.9.2.101.2.11 | |||
| INT brNetFaxShareSupported | 1.3.6.1.4.1.2435.2.3.9.2.101.2.11.1 | INTEGER | read-only | 0 indicates the Net Fax Share is not supported. 1 indicates the Net Fax Share is implemented by the firmware |
| INT brNetFaxShareEnable | 1.3.6.1.4.1.2435.2.3.9.2.101.2.11.2 | INTEGER | read-write | 0 indicates the Net Fax Share is not enabled. 1 indicates that the Net Fax Share is enabled. Writing a non-zero value will enable the Net Fax Share if it is supported by the firmware. |
| mcfNetPcFaxRx | 1.3.6.1.4.1.2435.2.3.9.2.101.2.12 | |||
| INT brNetPcFaxRxSupported | 1.3.6.1.4.1.2435.2.3.9.2.101.2.12.1 | INTEGER | read-only | 0 indicates the Net PC Fax Rx is not supported. 1 indicates the Net PC Fax Rx is implemented by the firmware |
| INT brNetPcFaxRxEnable | 1.3.6.1.4.1.2435.2.3.9.2.101.2.12.2 | INTEGER | read-write | 0 indicates the Net PC Fax Rx is not enabled. 1 indicates that the Net PC Fax Rx is enabled. Writing a non-zero value will enable the Net PC Fax Rx if it is supported by the firmware. |
| OCT brNetRegisterPcFaxInfo | 1.3.6.1.4.1.2435.2.3.9.2.101.2.12.3 | OCTET STRING | read-write | Add the PcFax information. If device receives GET request, device should reply fix value TRUE(writable), FALSE(not writable) to the client. |
| mcfFaxInfomation | 1.3.6.1.4.1.2435.2.3.9.2.101.2.101 | |||
| OCT brPhoneNumberLastFax | 1.3.6.1.4.1.2435.2.3.9.2.101.2.101.1 | OCTET STRING | read-only | Phone Number of Last Fax |
| CTR brPagesSentLastFax | 1.3.6.1.4.1.2435.2.3.9.2.101.2.101.2 | Counter | read-only | Pages Sent in Last Fax |
| DAT brTimestampLastFax | 1.3.6.1.4.1.2435.2.3.9.2.101.2.101.3 | DateAndTime | read-only | Timestamp of Last Fax |
| STR brFaxHeaderInfo | 1.3.6.1.4.1.2435.2.3.9.2.101.2.101.4 | DisplayString | read-write | Fax Header Infomation |
| mcScanner | 1.3.6.1.4.1.2435.2.3.9.2.101.3 | |||
| mcsNetScanner | 1.3.6.1.4.1.2435.2.3.9.2.101.3.11 | |||
| INT brNetScannerSupported | 1.3.6.1.4.1.2435.2.3.9.2.101.3.11.1 | INTEGER | read-only | 0 indicates the Net Scanner is not supported. 1 indicates the Net Scanner is implemented by the firmware |
| INT brNetScannerEnable | 1.3.6.1.4.1.2435.2.3.9.2.101.3.11.2 | INTEGER | read-write | 0 indicates the Net Scanner is not enabled. 1 indicates that the Net Scanner is enabled. Writing a non-zero value will enable the Net Scanner if it is supported by the firmware. |
| mcsNetSKy | 1.3.6.1.4.1.2435.2.3.9.2.101.3.12 | |||
| INT brNetSKeySupported | 1.3.6.1.4.1.2435.2.3.9.2.101.3.12.1 | INTEGER | read-only | 0 indicates the Net S-Key is not supported. 1 indicates the Net S-Key is implemented by the firmware |
| INT brNetSKeyEnable | 1.3.6.1.4.1.2435.2.3.9.2.101.3.12.2 | INTEGER | read-write | 0 indicates the Net S-Key is not enabled. 1 indicates that the Net S-Key is enabled. Writing a non-zero value will enable the Net S-Key if it is supported by the firmware. |
| mfpgeneral_setup | 1.3.6.1.4.1.2435.2.3.9.2.111 | |||
| OCT brServiceMode | 1.3.6.1.4.1.2435.2.3.9.2.111.1 | OCTET STRING | read-write | Service Mode |
| INT brLockMode | 1.3.6.1.4.1.2435.2.3.9.2.111.2 | INTEGER | read-write | Lock Mode 0:normal 1:Customer 2:Lock |
| INT brActivityReportSetting | 1.3.6.1.4.1.2435.2.3.9.2.111.3 | INTEGER | read-write | Activity Report Setting 0:off 1:every 1hour 3:every 3hour 6:every 6hour 12:every 12hour 24:every 24hour 48:every 2day 96:every 4day 240:every Sunday 241:every Monday 242:every Tueseday 243:every Wednesday 244:every Thurseday 245:every Friday 246:every Saturday 255:interval 50FAX |
| netPML | 1.3.6.1.4.1.2435.2.3.9.4 | |||
| netPMLmgmt | 1.3.6.1.4.1.2435.2.3.9.4.2 | |||
| device | 1.3.6.1.4.1.2435.2.3.9.4.2.1 | |||
| destination_subsystem1 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.1 | |||
| sleep | 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.1 | |||
| INT brpowerstime | 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.1.1 | INTEGER | read-write | PowerSave Timeout value. 1 to 2147483647 (sec) |
| autoc | 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.2 | |||
| INT brautocont | 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.2.7 | INTEGER | read-write | Auto Continue. 1:Off 2:On |
| simm | 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4 | |||
| specification | 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1 | |||
| simmkind0 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.1 | |||
| INT brsimmtype0 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.1.4 | INTEGER | read-only | SIMM type on slot0. 0: unconfirmed : 0 MB 1: empty 2: unconfirmed 3: No Supported : 0 MB 4: Read Only Memory 5: Volatility RAM : size MB 6: Un Volatility RAM : size MB 7: Flash Memory : size MB 8: Disk Drive : 0 MB 9: RAM/ROM : 0MB 10: Loading Paper Device 11: Out Paper Device 12: unconfirmed : 0 MB ato ha onaji |
| INT brsimmsize0 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.1.5 | INTEGER | read-only | SIMM size on slot0 |
| simmkind1 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.2 | |||
| INT brsimmtype1 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.2.4 | INTEGER | read-only | SIMM type on slot1. 0: unconfirmed : 0 MB 1: empty 2: unconfirmed 3: No Supported : 0 MB 4: Read Only Memory 5: Volatility RAM : size MB 6: Un Volatility RAM : size MB 7: Flash Memory : size MB 8: Disk Drive : 0 MB 9: RAM/ROM : 0MB 10: Loading Paper Device 11: Out Paper Device 12: unconfirmed : 0 MB ato ha onaji |
| INT brsimmsize1 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.2.5 | INTEGER | read-only | SIMM size on slot1 |
| simmkind2 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.3 | |||
| INT brsimmtype2 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.3.4 | INTEGER | read-only | SIMM type on slot2. 0: unconfirmed : 0 MB 1: empty 2: unconfirmed 3: No Supported : 0 MB 4: Read Only Memory 5: Volatility RAM : size MB 6: Un Volatility RAM : size MB 7: Flash Memory : size MB 8: Disk Drive : 0 MB 9: RAM/ROM : 0MB 10: Loading Paper Device 11: Out Paper Device 12: unconfirmed : 0 MB ato ha onaji |
| INT brsimmsize2 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.3.5 | INTEGER | read-only | SIMM size on slot2. |
| simmkind3 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.4 | |||
| INT brsimmtype3 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.4.4 | INTEGER | read-only | SIMM type on slot3. 0: unconfirmed : 0 MB 1: empty 2: unconfirmed 3: No Supported : 0 MB 4: Read Only Memory 5: Volatility RAM : size MB 6: Un Volatility RAM : size MB 7: Flash Memory : size MB 8: Disk Drive : 0 MB 9: RAM/ROM : 0MB 10: Loading Paper Device 11: Out Paper Device 12: unconfirmed : 0 MB ato ha onaji |
| INT brsimmsize3 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.4.5 | INTEGER | read-only | SIMM type on slot3. |
| bio1_explanation | 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.3 | |||
| determined | 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.3.1 | |||
| INT brTBD1 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.3.1.4 | INTEGER | read-write | unused |
| destination_subsystem2 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.2 | |||
| printerjob | 1.3.6.1.4.1.2435.2.3.9.4.2.1.2.1 | |||
| jobend | 1.3.6.1.4.1.2435.2.3.9.4.2.1.2.1.1 | |||
| INT brtimeout | 1.3.6.1.4.1.2435.2.3.9.4.2.1.2.1.1.1 | INTEGER | read-write | Job Timeout. 1 to 2147483647(sec) |
| INT brTBD2 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.2.1.1.5 | INTEGER | read-write | unused |
| destination_subsystem3 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.3 | |||
| prt_setup | 1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3 | |||
| prt_condition | 1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1 | |||
| INT brpersonality | 1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1.1 | INTEGER | read-write | Printer Emulation setting. 1:PCL 2:HPGL 4:PS 5:AUTO 6:IBM 7:EPSON 8:HBP |
| INT brorientation | 1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1.2 | INTEGER | read-write | Default Paper Orientation. 1:portrait 2:landscape |
| INT brcopies | 1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1.4 | INTEGER | read-write | Default Copy Pages. 1-999 pages |
| INT brTBD3 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1.6 | INTEGER | read-write | unused |
| INT brresolution | 1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1.8 | INTEGER | read-write | Default Resolution. 300, 600 or 1200dpi |
| INT brpageprotect | 1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1.10 | INTEGER | read-write | Page Protect mode 1:Off 3:Auto 4:Letter 5:Legal 6:A4 |
| INT brlines | 1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1.11 | INTEGER | read-write | lines per page. 5-128 |
| INT brpaper | 1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1.13 | INTEGER | read-write | Default Paper size. -1:No Casette 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM (ANY) 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor 920:3x5(inches) 921:Envelopes Y4 922:Largest envelopes of the West 923:A5L 924:B6JIS 925:16K195x270 926:16K184x260 927:197x273 999:Other 1000:No Casette 1001:Auto |
| INT brpapertype | 1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1.22 | INTEGER | read-write | Default Media type. 0:Regular 1:Thick paper 2:Thicker paper 3:Transparency 4:Thin paper 5:Bond paper 6:ENVELOPES 7:ENV. THICK 8:ENV. THIN 9:RECYCLED 10:HAGAKI 11:LABEL 1nd (default) Tray PaperType |
| INT brpapertype2 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1.23 | INTEGER | read-write | Default Media type. 0:Regular 1:Thick paper 2:Thicker paper 3:Transparency 4:Thin paper 5:Bond paper 6:ENVELOPES 7:ENV. THICK 8:ENV. THIN 9:RECYCLED 10:HAGAKI 11:LABEL 2nd Tray PaperType |
| INT brpapertypeMP | 1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1.26 | INTEGER | read-write | Default Media type. 0:Regular 1:Thick paper 2:Thicker paper 3:Transparency 4:Thin paper 5:Bond paper 6:ENVELOPES 7:ENV. THICK 8:ENV. THIN 9:RECYCLED 10:HAGAKI 11:LABEL 1nd (default) Tray PaperType |
| destination_subsystem4 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.4 | |||
| print_engine | 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1 | |||
| prt_density | 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.1 | |||
| INT brdensity | 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.1.5 | INTEGER | read-write | Print Density. -15..15 |
| status_prt_eng | 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.2 | |||
| tray | 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3 | |||
| manual | 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.1 | |||
| INT brmanualfeed | 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.1.4 | INTEGER | read-write | Manualfeed mode. 1:Off 2:On |
| traysize | 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.3 | |||
| mp | 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.3.1 | |||
| INT brmpsize | 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.3.1.1 | INTEGER | read-write | MP Tray paper size -1:No Casette 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor |
| cassette | 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.3.2 | |||
| INT brtray1size | 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.3.2.1 | INTEGER | read-write | Tray1 paper size -1:No Casette 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor |
| cassette2 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.3.3 | |||
| INT brtray2size | 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.3.3.1 | INTEGER | read-write | Tray2 paper size -1:No Casette 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor |
| cassette3 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.3.4 | |||
| INT brtray3size | 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.3.4.1 | INTEGER | read-write | Tray3 paper size -1:No Casette 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor |
| cassette4 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.3.5 | |||
| INT brtray4size | 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.3.5.1 | INTEGER | read-write | Tray4 paper size -1:No Casette 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor |
| economy | 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.6 | |||
| INT brret | 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.6.5 | INTEGER | read-write | HRC mode. 1:Off 2:Bright 3:Medium 4:Dark |
| INT breconomode | 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.6.7 | INTEGER | read-write | Toner Save mode. 100:Off 0:On |
| brorg | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5 | |||
| printersetup | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1 | |||
| general | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.1 | |||
| INT brPrtGeneralEmulationTimeout | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.1.1 | INTEGER | read-write | Emulation Timeout. 1- 99(sec) |
| INT brPrtGeneralFeeder | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.1.2 | INTEGER | read-write | Default Feeder mode. 0:Auto 1:MP Tray 2:Tray1 3:Tray2 4:Tray3 5:Tray4 |
| INT brPrtGeneralPowerSave | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.1.3 | INTEGER | read-write | Power Save mode. 1:Off 2:On |
| INT brPrtGeneralBuzzer | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.1.4 | INTEGER | read-write | Buzzer. 1:Off 2:On |
| INT brPrtGeneralColor | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.1.5 | INTEGER | read-write | Default Color mode 1:Monochrome 2:Color 3:Auto |
| INT brPrtGeneralDuplex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.1.6 | INTEGER | read-write | Duplex mode 1:Off(Simplex) 2:On(Duplex) |
| INT brPrtGeneralBinding | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.1.7 | INTEGER | read-write | Binding type 3:Short Edge 2:Long Edge |
| advanced | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2 | |||
| INT brPrtAdvancedPriority | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.1 | INTEGER | read-write | FX/XL Priority. 1:IBM XL 2:EPSON FX |
| INT brPrtAdvancedUseMPTrayFirst | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.2 | INTEGER | read-write | MP Tray First 1:No 2:Yes |
| INT brPrtAdvancedMPTrayFeed | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.3 | INTEGER | read-write | MP Tray feed mode. 1:Single 2:Continuous |
| INT brPrtAdvancedXOffset | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.4 | INTEGER | read-write | X Offset. -500 to +500 pixel(600dpi) |
| INT brPrtAdvancedYOffset | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.5 | INTEGER | read-write | Y Offset. -500 to +500 pixel(600dpi) |
| INT brPrtAdvancedImageCompression | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.6 | INTEGER | read-write | Image Compression mode. 0:Auto 1:Off 2:On |
| autoff | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.7 | |||
| INT brPrtAdvancedAutoFormFeed | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.7.1 | INTEGER | read-write | Auto Formfeed mode. 1:Off 2:On |
| INT brPrtAdvancedAutoTimeout | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.7.2 | INTEGER | read-write | Auto Formfeed timeout. 1-99 (sec) |
| INT brPrtAdvancedFFSuppress | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.8 | INTEGER | read-write | FF Suppress mode. 1:Off 2:On |
| INT brPrtAdvancedTonerLowPrint | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.9 | INTEGER | read-write | Print mode on Toner Low. 1:Stop 2:Continue |
| INT brPrtAdvancedPrintDensity | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.10 | INTEGER | read-write | Print Density. 1-15 |
| INT brPrtAdvancedInputBuffer | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.11 | INTEGER | read-write | Input Buffer size. 1-15 blocks |
| INT brPrtAdvancedLanguage | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.12 | INTEGER | read-write | 1:ENGLISH 2:DANISH 3:DUTCH 4:FINNISH 5:FRENCH 6:GERMAN 7:ITALIAN 8:NORWEGIAN 9:PORTUGUESE 10:SWEDISH 11:SPANISH 12:TURKISH 13:POLISH 14:JAPANESE 15:RUSSIAN 16:CZECH 17:HUNGARIAN 18:ROMANIAN 19:BULGARIAN 20:SLOVAKIAN 21:CHINESE 22:BRAZIL |
| INT brSecurePrintRAMSizeMax | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.13 | INTEGER | read-only | The Max of Secure print RAM Size |
| INT brSecurePrintRAMSize | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.14 | INTEGER | read-write | Secure print RAM Size |
| INT brPrtAdvancedJamRecovery | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.15 | INTEGER | read-write | Jam recovery setting |
| INT brPrtAdvancedSleepIndication | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.16 | INTEGER | read-write | By enabling the Dimmed option, the status LED is dimmed while the printer is in sleep mode. |
| INT brPrtAdvancedDestination | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.17 | INTEGER | read-write | Destination |
| INT brPrtAdvancedLowerLCD | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.18 | INTEGER | read-write | Lower LCD |
| INT brPrtAdvancedAutoOnline | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.19 | INTEGER | read-write | Auto Online |
| INT brPrtAdvancedButtonRepeat | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.20 | INTEGER | read-write | Button Repeat. 0.1-2.0 |
| INT brPrtAdvancedMessageScroll | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.21 | INTEGER | read-write | Message Scroll. 1-10 |
| buzzer | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.22 | |||
| INT brPrtAdvancedErrorBuzzer | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.22.1 | INTEGER | read-write | Error Buzzer |
| INT brPrtAdvancedPanelBuzzer | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.22.2 | INTEGER | read-write | Panel Buzzer |
| INT brPrtAdvancedBuzzerVolume | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.22.3 | INTEGER | read-write | Buzzer Volume |
| INT brPrtAdvancedLCDDensity | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.23 | INTEGER | read-write | LCDDensity |
| smallPaperSize | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.51 | |||
| INT brSmallPaperSizeMP | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.51.1 | INTEGER | read-write | MP Tray Small Paper size. 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor 1000:No Casette |
| INT brSmallPaperSize1 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.51.2 | INTEGER | read-write | Tray1 Small Paper size. 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor 1000:No Casette |
| INT brSmallPaperSize2 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.51.3 | INTEGER | read-write | Tray2 Small Paper size. 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor 1000:No Casette |
| INT brSmallPaperSize3 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.51.4 | INTEGER | read-write | Tray3 Small Paper size. 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor 1000:No Casette |
| INT brSmallPaperSize4 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.51.5 | INTEGER | read-write | Tray4 Small Paper size. 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor 1000:No Casette |
| trayPriority | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.52 | |||
| INT brPrtAdvancedTrayPriority | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.52.1 | INTEGER | read-write | The value of brTrayPriorityIndex corresponding to the default setting. |
| INT brTrayPriorityCount | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.52.2 | INTEGER | read-only | Maximum number of TrayPriority INDEX. |
| brTrayPriorityTable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.52.3 | not-accessible | This table represents TrayPriority setting. | |
| brTrayPriorityEntry | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.52.3.1 | not-accessible | A row in the TrayPriority table. Rows cannot be created or deleted. | |
| INT brTrayPriorityIndex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.52.3.1.1 | INTEGER | read-only | The number. |
| OCT brTrayPriorityMember | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.52.3.1.2 | OCTET STRING | read-only | The TrayPriority member data. Format: valulen(1byte), value(valulen byte) |
| carbonCopy | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.53 | |||
| INT brCarbonCopyMode | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.53.1 | INTEGER | read-write | Carbon Copy mode setting. |
| INT brCarbonCopies | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.53.2 | INTEGER | read-write | The copies setting of Carbon Copy function. |
| brCarbonCopyTable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.53.10 | not-accessible | This table represents CarbonCopy setting. | |
| brCarbonCopyEntry | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.53.10.1 | not-accessible | A row in the CarbonCopy table. Rows cannot be created or deleted. | |
| INT brCarbonCopyIndex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.53.10.1.1 | INTEGER | read-only | The number. |
| INT brCarbonCopyTray | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.53.10.1.2 | INTEGER | read-write | Copy Tray setting. |
| INT brCarbonCopyMacro | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.53.10.1.3 | INTEGER | read-write | Carbon Copy Macro Setting |
| INT brCarbonCopyMacroID | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.53.10.1.4 | INTEGER | read-write | Carbon Copy Macro ID Setting |
| mediaFix | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.54 | |||
| INT brMediaFixTray1 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.54.1 | INTEGER | read-write | Media Fix setting for tray1. |
| INT brMediaFixTray2 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.54.2 | INTEGER | read-write | Media Fix setting for tray2. |
| INT brMediaFixTray3 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.54.3 | INTEGER | read-write | Media Fix setting for tray3. |
| INT brMediaFixTray4 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.54.4 | INTEGER | read-write | Media Fix setting for tray4. |
| INT brMediaFixMP | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.54.10 | INTEGER | read-write | Media Fix setting for MPtray. |
| directprint | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.60 | |||
| INT brDirectPrintPaperSize | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.60.1 | INTEGER | read-write | Default Paper size. -1:No Casette 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM (ANY) 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor 920:3x5(inches) 921:Envelopes Y4 922:Largest envelopes of the West 923:A5L 924:B6JIS 925:16K195x270 926:16k184x260 927:16k197x273 |
| INT brDirectPrintMediaType | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.60.2 | INTEGER | read-write | Default Media type. 0:Regular 1:Thick paper 2:Thicker paper 3:Transparency 4:Thin paper 5:Bond paper 6:ENVELOPES 7:ENV. THICK 8:ENV. THIN 9:RECYCLED 10:HAGAKI 11:LABEL 1nd (default) Tray PaperType |
| INT brDirectPrintMultipulPage | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.60.3 | INTEGER | read-write | |
| INT brDirectPrintOrientation | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.60.4 | INTEGER | read-write | |
| INT brDirectPrintCollate | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.60.5 | INTEGER | read-write | |
| INT brDirectPrintOutputColor | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.60.6 | INTEGER | read-write | |
| INT brDirectPrintPrintQuality | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.60.7 | INTEGER | read-write | |
| INT brDirectPrintPdfOption | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.60.8 | INTEGER | read-write | |
| INT brDirectPrintSetting | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.60.9 | INTEGER | read-only | |
| INT brDirectPrintPdfThumbnailType | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.60.10 | INTEGER | read-write | PDF Thumbnail Type 1:AlternativeImage 2:ReductionImage |
| pictbridge | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.61 | |||
| INT brPictBridgePaperSize | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.61.1 | INTEGER | read-write | Default Paper size. -1:No Casette 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM (ANY) 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor 920:3x5(inches) 921:Envelopes Y4 922:Largest envelopes of the West |
| INT brPictBridgeOrientation | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.61.2 | INTEGER | read-write | |
| INT brPictBridgeDateTime | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.61.3 | INTEGER | read-write | |
| INT brPictBridgeFileName | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.61.4 | INTEGER | read-write | |
| INT brPictBridgePrintQuality | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.61.5 | INTEGER | read-write | |
| INT brPictBridgePrintSetting | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.61.6 | INTEGER | read-only | |
| colorcorrection | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62 | |||
| INT brColorCalibration | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.1 | INTEGER | read-write | |
| INT brColorCalibrationReset | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.2 | INTEGER | read-write | |
| INT brAutoRegistRegistrate | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.3 | INTEGER | read-write | |
| INT brAutoRegistSetInterval | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.4 | INTEGER | read-write | |
| INT brRegistrationPrintChart | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.5 | INTEGER | read-write | |
| INT brRegistrationXMagentaLeft | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.6 | INTEGER | read-write | |
| INT brRegistrationXMagentaRight | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.7 | INTEGER | read-write | |
| INT brRegistrationXCyanLeft | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.8 | INTEGER | read-write | |
| INT brRegistrationXCyanRight | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.9 | INTEGER | read-write | |
| INT brRegistrationXYellowLeft | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.10 | INTEGER | read-write | |
| INT brRegistrationXYellowRight | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.11 | INTEGER | read-write | |
| INT brRegistrationYMagenta | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.12 | INTEGER | read-write | |
| INT brRegistrationYCyan | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.13 | INTEGER | read-write | |
| INT brRegistrationYYellow | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.14 | INTEGER | read-write | |
| funclock | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63 | |||
| INT brFuncLockSettingInit | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.1 | INTEGER | read-write | Init Function Lock Setting. |
| STR brFuncLockAdminPassword | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.2 | DisplayString | read-write | Get or Set the administrator password of Function Lock. |
| INT brFuncLock | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.3 | INTEGER | read-write | Get or Set the status of Function Lock. |
| INT brFuncLockPublicFuncCount | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.4 | INTEGER | read-only | Return the number of functions to be locked on the public mode. |
| brFuncLockPublicTable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.5 | not-accessible | ||
| brFuncLockPublicEntry | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.5.1 | not-accessible | ||
| INT brFuncLockPublicFuncIndex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.5.1.1 | INTEGER | read-only | Return the index value of functions to be locked on the public mode. |
| INT brFuncLockPublicFuncMember | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.5.1.2 | INTEGER | read-only | Return the member of functions to be locked on the public mode. |
| INT brFuncLockPublicFuncSupported | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.5.1.3 | INTEGER | read-only | Return the status of availableness of functions to be locked on the public mode. |
| INT brFuncLockPublicFuncEnable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.5.1.4 | INTEGER | read-write | Get of Set the status of functions on the public mode. |
| INT brFuncLockUserCount | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.6 | INTEGER | read-only | Return the number of users to be locked on function lock. |
| brFuncLockUserTable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.7 | not-accessible | ||
| brFuncLockUserEntry | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.7.1 | not-accessible | ||
| INT brFuncLockUserIndex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.7.1.1 | INTEGER | read-only | Return the index value of users to be locked on function lock. |
| STR brFuncLockUserName | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.7.1.2 | DisplayString | read-write | Get or Set the user name of function lock. |
| STR brFuncLockUserPassword | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.7.1.3 | DisplayString | read-write | Get or Set the user password of function lock. |
| INT brFuncLockUserFuncCount | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.8 | INTEGER | read-only | Return the number of users to be locked on the function lock. |
| brFuncLockUserFuncTable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.9 | not-accessible | ||
| brFuncLockUserFuncEntry | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.9.1 | not-accessible | ||
| INT brFuncLockUserFuncIndex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.9.1.1 | INTEGER | read-only | Return the index value of users to be locked on user mode. |
| INT brFuncLockUserFuncMember | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.9.1.2 | INTEGER | read-only | Return the function numbers to be locked on user mode. |
| INT brFuncLockUserFuncSupported | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.9.1.3 | INTEGER | read-only | Return the availableness of function to be locked on user mode. |
| INT brFuncLockUserFuncEnable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.9.1.4 | INTEGER | read-write | Get or Set the lock status on the user mode. |
| INT brFuncLockSetting | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.10 | INTEGER | read-write | Write the all information of function lock. |
| INT brFuncLockUserPrintPageCounterReset | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.20 | INTEGER | read-write | Reset all user's counter of Color/Mono print page. |
| INT brFuncLockPublicPrintLimitEnable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.21 | INTEGER | read-write | This MIB represents Enable/Disable of print limit setting for public user. |
| INT brFuncLockPublicPrintPageMax | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.22 | INTEGER | read-write | The Maximum of print limited for public user. |
| INT brFuncLockPublicPrintPageCountMono | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.23 | INTEGER | read-only | The counter of monochrome print page. |
| INT brFuncLockPublicPrintPageCountColor | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.24 | INTEGER | read-only | The counter of color print page for public user. |
| brFuncLockUserPrintPageTable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.25 | not-accessible | ||
| brFuncLockUserPrintPageEntry | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.25.1 | not-accessible | ||
| INT brFuncLockUserPrintPageIndex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.25.1.1 | INTEGER | read-only | |
| INT brFuncLockUserPrintPageLimitEnable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.25.1.2 | INTEGER | read-write | The Maximum of Print Page setting for user. |
| INT brFuncLockUserPrintPageCountMono | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.25.1.3 | INTEGER | read-only | The Counter of Monochrome Print Page for user. |
| INT brFuncLockUserPrintPageCountColor | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.25.1.4 | INTEGER | read-only | The counter of color print page for user. |
| INT brFuncLockUserPrintPageMax | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.25.1.5 | INTEGER | read-write | The Maximum of print limited for user. |
| INT brFuncLockUserPrintPageCountMonoLast | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.25.1.6 | INTEGER | read-only | |
| INT brFuncLockUserPrintPageCountColorLast | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.25.1.7 | INTEGER | read-only | |
| INT brFuncLockPcLoginNameAuthEnable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.26 | INTEGER | read-write | This MIB represents Enable/Disable of PC Login Authentication setting. |
| INT brFuncLockPcLoginNameAuthCount | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.27 | INTEGER | read-only | The number of PC Login Name. |
| brFuncLockPcLoginNameTable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.28 | not-accessible | ||
| brFuncLockPcLoginNameEntry | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.28.1 | not-accessible | ||
| INT brFuncLockPcLoginNameAuthIndex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.28.1.1 | INTEGER | read-only | |
| OCT brFuncLockPcLoginName | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.28.1.2 | OCTET STRING | read-write | The PC Login Name. |
| INT brFuncLockPcLoginNameAuthID | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.28.1.3 | INTEGER | read-write | PC Login ID for PC Login name. |
| INT brFuncLockPublicPrintPageCountMonoLast | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.29 | INTEGER | read-only | |
| INT brFuncLockPublicPrintPageCountColorLast | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.30 | INTEGER | read-only | |
| autocountreset | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.31 | |||
| INT brFuncLockAutoCountResetFrequency | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.31.1 | INTEGER | read-write | |
| OCT brFuncLockAutoCountResetTime | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.31.2 | OCTET STRING | read-write | |
| INT brFuncLockAutoCountResetWeek | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.31.3 | INTEGER | read-write | |
| INT brFuncLockAutoCountResetDate | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.31.4 | INTEGER | read-write | |
| 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3 | ||||
| INT brPrtMailbox | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.1 | INTEGER | read-write | Mailbox Installed of not |
| brPrtMailboxProtectTable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.2 | not-accessible | unused | |
| brPrtMailboxProtectEntry | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.2.1 | not-accessible | unused | |
| INT brPrtMailboxProtectIndex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.2.1.1 | INTEGER | read-write | unused |
| INT brPrtMailboxProtect | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.2.1.2 | INTEGER | read-write | unused |
| brPrtAvoidMailboxFullTable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.3 | not-accessible | unused | |
| brPrtAvoidMailboxFullEntry | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.3.1 | not-accessible | unused | |
| INT brPrtAvoidMailboxFullIndex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.3.1.1 | INTEGER | read-write | unused |
| INT brPrtAvoidMailboxFull | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.3.1.2 | INTEGER | read-write | unused |
| INT brPrtMailboxOutbin | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.4 | INTEGER | read-write | Outbin |
| INT brPrtMailboxProtectGroup | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.5 | INTEGER | read-write | Mailbox Protect |
| INT brPrtAvoidMailboxFullGroup | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.6 | INTEGER | read-write | Avoid Mailbox Full |
| finisher | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.4 | |||
| INT brPrtFinisher | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.4.1 | INTEGER | read-only | Finisher type 0:no finisher 1:FS5050 2:FS5100 |
| catch_tray | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.5 | |||
| INT brPrtCatchTray | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.5.1 | INTEGER | read-only | catch tray Installed or not |
| pagesetup | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2 | |||
| pcl | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1 | |||
| margin_p | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1.1 | |||
| INT brPagePCLLeftMargin | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1.1.1 | INTEGER | read-write | PCL LeftMargin 1270N :0-145 2400Ce :0-176 |
| INT brPagePCLRightMargin | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1.1.2 | INTEGER | read-write | PCL RightMargin 1270N :10-155 2400Ce :10-186 |
| INT brPagePCLTopMargin | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1.1.3 | INTEGER | read-write | PCL TopMargin 0:0 33:0.33 50:0.5 100:1.0 150:1.5 200:2.0 |
| INT brPagePCLBottomMargin | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1.1.4 | INTEGER | read-write | PCL BottomMargin 0:0 33:0.33 50:0.5 100:1.0 150:1.5 200:2.0 |
| INT brPagePCLLines | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1.1.5 | INTEGER | read-write | PCL Form Line 5-128 |
| auto_p | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1.2 | |||
| INT brPagePCLAutoLF | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1.2.1 | INTEGER | read-write | PCL AutoLF 1:Off 2:On |
| INT brPagePCLAutoCR | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1.2.2 | INTEGER | read-write | PCL AutoCR 1:Off 2:On |
| INT brPagePCLAutoWrap | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1.2.3 | INTEGER | read-write | PCL AutoWrap 1:Off 2:On |
| INT brPagePCLAutoSkip | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1.2.4 | INTEGER | read-write | PCL AutoSkip 1:Off 2:On |
| ps | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.2 | |||
| INT brPagePSPrintPSError | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.2.1 | INTEGER | read-write | PrintPSError 1:Off 2:On |
| INT brPagePSKeepPCLFonts | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.2.2 | INTEGER | read-write | KeepPCLFonts 1:Off 2:On |
| INT brPagePSCAPTsetting | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.2.3 | INTEGER | read-write | PS CAPT setting 1:Off 2:On |
| gl | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3 | |||
| pen1 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.1 | |||
| INT brPageGLPen1Size | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.1.1 | INTEGER | read-write | GL PenSize 1-16 |
| INT brPageGLPen1GrayLevel | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.1.2 | INTEGER | read-write | GLPen GrayLevel 0:15% 1:30% 2:45% 3:75% 4:90% 5:100% |
| pen2 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.2 | |||
| INT brPageGLPen2Size | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.2.1 | INTEGER | read-write | GL PenSize 1-16 |
| INT brPageGLPen2GrayLevel | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.2.2 | INTEGER | read-write | GLPen GrayLevel 0:15% 1:30% 2:45% 3:75% 4:90% 5:100% |
| pen3 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.3 | |||
| INT brPageGLPen3Size | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.3.1 | INTEGER | read-write | GL PenSize 1-16 |
| INT brPageGLPen3GrayLevel | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.3.2 | INTEGER | read-write | GLPen GrayLevel 0:15% 1:30% 2:45% 3:75% 4:90% 5:100% |
| pen4 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.4 | |||
| INT brPageGLPen4Size | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.4.1 | INTEGER | read-write | GL PenSize 1-16 |
| INT brPageGLPen4GrayLevel | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.4.2 | INTEGER | read-write | GLPen GrayLevel 0:15% 1:30% 2:45% 3:75% 4:90% 5:100% |
| pen5 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.5 | |||
| INT brPageGLPen5Size | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.5.1 | INTEGER | read-write | GL PenSize 1-16 |
| INT brPageGLPen5GrayLevel | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.5.2 | INTEGER | read-write | |
| pen6 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.6 | |||
| INT brPageGLPen6Size | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.6.1 | INTEGER | read-write | GL PenSize 1-16 |
| INT brPageGLPen6GrayLevel | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.6.2 | INTEGER | read-write | GLPen GrayLevel 0:15% 1:30% 2:45% 3:75% 4:90% 5:100% |
| epson | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.4 | |||
| margin_e | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.4.1 | |||
| INT brPageEPSONLeftMargin | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.4.1.1 | INTEGER | read-write | EPSON LeftMargin 1270N :0-145 2400Ce :0-176 |
| INT brPageEPSONRightMargin | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.4.1.2 | INTEGER | read-write | EPSON RightMargin 1270N :10-155 2400Ce :10-186 |
| INT brPageEPSONTopMargin | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.4.1.3 | INTEGER | read-write | EPSON TopMargin 0:0 33:0.33 50:0.5 100:1.0 150:1.5 200:2.0 |
| INT brPageEPSONBottomMargin | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.4.1.4 | INTEGER | read-write | EPSON BottomMargin 0:0 33:0.33 50:0.5 100:1.0 150:1.5 200:2.0 |
| INT brPageEPSONLines | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.4.1.5 | INTEGER | read-write | EPSON Form Line 5-128 |
| auto_e | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.4.2 | |||
| INT brPageEPSONAutoLF | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.4.2.1 | INTEGER | read-write | EPSON AutoLF 1:Off 2:On |
| INT brPageEPSONAutoMask | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.4.2.5 | INTEGER | read-write | EPSON AutoMask 1:Off 2:On |
| ibm | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.5 | |||
| margin_i | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.5.1 | |||
| INT brPageIBMLeftMargin | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.5.1.1 | INTEGER | read-write | IBM LeftMargin 1270N :0-145 2400Ce :0-176 |
| INT brPageIBMRightMargin | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.5.1.2 | INTEGER | read-write | IBM LeftMargin 1270N :10-155 2400Ce :10-186 |
| INT brPageIBMTopMargin | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.5.1.3 | INTEGER | read-write | IBM BottomMargin 0:0 33:0.33 50:0.5 100:1.0 150:1.5 200:2.0 |
| INT brPageIBMBottomMargin | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.5.1.4 | INTEGER | read-write | IBM BottomMargin 0:0 33:0.33 50:0.5 100:1.0 150:1.5 200:2.0 |
| INT brPageIBMLines | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.5.1.5 | INTEGER | read-write | IBM Form Line 5-128 |
| auto_i | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.5.2 | |||
| INT brPageIBMAutoLF | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.5.2.1 | INTEGER | read-write | IBM AutoLF 1:Off 2:On |
| INT brPageIBMAutoCR | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.5.2.2 | INTEGER | read-write | IBM AutoCR 1:Off 2:On |
| INT brPageIBMAutoMask | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.5.2.5 | INTEGER | read-write | IBM AutoMask 1:Off 2:On |
| fontsetup | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.3 | |||
| INT brFontName | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.3.1 | INTEGER | read-write | unused |
| INT brFontPointSize | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.3.2 | INTEGER | read-write | unused(400-99975) |
| INT brFontPitch | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.3.3 | INTEGER | read-write | unused(44-9999) |
| INT brFontSymbolSet | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.3.4 | INTEGER | read-write | unused |
| controlpanel | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4 | |||
| reset | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.1 | |||
| INT brPanelResetUser | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.1.1 | INTEGER | read-write | User Reset |
| INT brPanelResetFactory | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.1.2 | INTEGER | read-write | Factory Reset |
| test | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.2 | |||
| INT brPanelTestConfiguration | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.2.1 | INTEGER | read-write | Print Config page |
| INT brPanelTestFontList | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.2.2 | INTEGER | read-write | Print Fonts list |
| INT brPanelTestTestPage | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.2.3 | INTEGER | read-write | Print Test page |
| INT brPanelTestDemoPage | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.2.4 | INTEGER | read-write | Print Demo page 0:Enable Print Demo page 1:Disable Print Demo page |
| panellock | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.3 | |||
| INT brPanelLockPasswd | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.3.1 | INTEGER | read-write | unused |
| INT brPanelLock | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.3.2 | INTEGER | read-only | The state of panel lock |
| OCT brPanelLockOn | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.3.3 | OCTET STRING | read-write | Panel Lock by setting a password. |
| OCT brPanelLockOff | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.3.4 | OCTET STRING | read-write | Panel Lock is canceled by inputting a password.. |
| key | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.4 | |||
| INT brPanelKeyOnline | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.4.1 | INTEGER | read-write | Press Online Key |
| INT brPanelKeyFormFeed | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.4.2 | INTEGER | read-write | Press FormFeed Key |
| INT brPanelKeyContinue | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.4.3 | INTEGER | read-write | Press Countinue Key |
| INT brPanelKeyMode | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.4.4 | INTEGER | read-write | unused |
| INT brPanelKeyGo | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.4.5 | INTEGER | read-write | Press Go Key |
| INT brPanelKeyJobCancel | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.4.6 | INTEGER | read-write | Press JobCancel Key |
| INT brPanelKeyReprint | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.4.7 | INTEGER | read-write | Press Reprint Key |
| INT brPanelKeySecure | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.4.8 | INTEGER | read-write | Press SecurePrint Key |
| panelinfo | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5 | |||
| INT brLCDMode1 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.1 | INTEGER | read-only | LCD Display Mode. 1:fix 2:blink 3:scroll |
| OCT brLCDString1 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.2 | OCTET STRING | read-only | LCD Display String of first line. |
| INT brLCDMode2 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.3 | INTEGER | read-only | LCD Display Mode. 1:fix 2:blink 3:scroll |
| OCT brLCDString2 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.4 | OCTET STRING | read-only | LCD Display String of second line. |
| STR brLCDString16fix | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.5 | DisplayString | read-only | LCD Display String of 16fix. |
| INT brBackLightColor | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.6 | INTEGER | read-only | LCD Display Mode. 0:Off 1:Green 2:Orange 3:Red |
| INT brLCDMode3 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.7 | INTEGER | read-only | LCD Display Mode. 1:fix 2:blink 3:scroll |
| OCT brLCDString3 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.8 | OCTET STRING | read-only | LCD Display String of first line. |
| INT brLCDMode4 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.9 | INTEGER | read-only | LCD Display Mode. 1:fix 2:blink 3:scroll |
| OCT brLCDString4 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.10 | OCTET STRING | read-only | LCD Display String of first line. |
| INT brLCDMode5 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.11 | INTEGER | read-only | LCD Display Mode. 1:fix 2:blink 3:scroll |
| OCT brLCDString5 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.12 | OCTET STRING | read-only | LCD Display String of first line. |
| INT brLCDContrast | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.13 | INTEGER | read-write | This value adjusts the contrast of the LCD Display. |
| printerinfomation | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5 | |||
| OCT brInfoSerialNumber | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.1 | OCTET STRING | read-only | Serial number of printer |
| INT brInfoType | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.2 | INTEGER | read-only | unused |
| version | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.3 | |||
| INT brInfoUpperMIBVer | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.3.1 | INTEGER | read-only | unused (upper digit of the MIB version) |
| INT brInfoLowerMIBVer | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.3.2 | INTEGER | read-only | unused (lower digit of the MIB version) |
| INT brInfoStatus | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.4 | INTEGER | read-only | Status message ID |
| INT brInfoNetVerUpStatus | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.5 | INTEGER | read-only | unused |
| INT brInfoPrinterUStatus | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.6 | INTEGER | read-only | Status ID |
| INT brInfoPConSupported | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.7 | INTEGER | read-only | BRPCon support 0:not supported 1:supported |
| OCT brInfoMaintenance | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.8 | OCTET STRING | read-only | Maintenance info. |
| INT brInfoModelNumber | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.9 | INTEGER | read-only | Printer Model ID 4:2400Ce 5:3400CN 6:3260 8:2460 9:2600cn 11:3450cn 13:am 14:zlhe 15:zl2 16:jigen 17:aml 18:l4c 19: ALL 20: AL LED 21: AL LCD 22: HL-4040CN 23: ALL China 24: HL-4050CDN/HL-4070CDW 25: ALL2 101:ZL MFC FB type 102:ZL MFC Normal type 103:BH MFC Nornal type 104:BH MFC FB type 105:ZL MFC with HS 106:BH MFC with HS 107: ZL2FB 108: BHL2MFC 109: BHL2FB 110: ZL2MFC 111: Mini2 112: Mini2 ADF 113: BH3FB 114: BH3MFC 115: ALL-MFC 116: ALL-FB 117: SLow4C 118: mini2eColorLCD, 119: mini2eColorLCD ADF 120: AL-FB 121: DCP540 122: DCP750 123: MFC440 124: MFC665 125: MFC850 126: MFC860 127: MFC5460 128: MFC5860 129: DCP6150 130: DCP6260 131: MFC6460 132: MFC6860 133: DCP770 134: MFC480 135: AC-FB CIS 136: AC-FB CCD 137: MFC7440 138: MFC7840 139: MFC5490 140: MFC5890 141: MFC6490 142: DCP6690 143: MFC6890 144: DCP585 145: MFC490 146: MFC790 147: MFC990 148: MFC930 |
| OCT brInfoCounter | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.10 | OCTET STRING | read-only | Page counter |
| OCT brInfoNextCare | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.11 | OCTET STRING | read-only | Remaining life info. |
| INT brInfoHDDSlot1 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.12 | INTEGER | read-only | Card Slot1 status 1:complete 2:IO error 3:memory error 4:not found 5:no device 6:no file(format) |
| INT brInfoHDDSlot2 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.13 | INTEGER | read-only | Card Slot2 status 1:complete 2:IO error 3:memory error 4:not found 5:no device 6:no file(format) |
| INT brInfoHDDInternal | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.14 | INTEGER | read-only | Internal HDD info. 1:complete 2:IO error 3:memory error 4:not found 5:no device 6:no file(format) |
| OCT brInfoHDDSize | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.15 | OCTET STRING | read-only | unused |
| STR brInfoSolutionsCenterURL | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.16 | DisplayString | read-only | Brother Solutions Center's URL |
| STR brInfoDeviceRomVersion | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.17 | DisplayString | read-only | The device rom version |
| OCT brInfoCoverage | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.18 | OCTET STRING | read-only | Coverage info. |
| CTR brInfoEstimatedPagesRemaining | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.19 | Counter | read-only | Estimated pages remaining info. |
| OCT brInfoReplaceCount | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.20 | OCTET STRING | read-only | Replace count info. |
| OCT brInfoJamCount | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.21 | OCTET STRING | read-only | Jam count info. |
| INT brInfoJamCountClear | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.22 | INTEGER | read-write | Jam count Clear. |
| OCT brInfoReplaceTime | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.23 | OCTET STRING | read-only | Replace count time info. |
| OCT brInfoDeviceSubRomVersion | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.24 | OCTET STRING | read-only | The PCL/PS ROM Version. |
| INT brInfoAlertVersion | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.25 | INTEGER | read-only | It indicates the version that prtAlertLocation is implemented correctly. |
| INT brInfoBlackPrint | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.26 | INTEGER | read-only | It indicates black only print enable/disable info 0: disable 1: enable |
| errorHistory | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51 | |||
| INT brErrorHistoryCount | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51.1 | INTEGER | read-only | Maximum number of Error History. |
| brErrorHistoryTable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51.2 | not-accessible | This table represents Error History. | |
| brErrorHistoryEntry | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51.2.1 | not-accessible | A row in the ErrorHistory table. Rows cannot be created or deleted. | |
| INT brErrorHistoryIndex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51.2.1.1 | INTEGER | read-only | A unique value for the error history. |
| OCT brErrorHistoryDescription | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51.2.1.2 | OCTET STRING | read-only | The ErrorHistory Description. |
| INT brErrorHistoryAllClear | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51.3 | INTEGER | read-write | All clear Error History. |
| INT brCommunicationErrorHistoryCount | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51.11 | INTEGER | read-only | Maximum number of Communication Error History. |
| brCommunicationErrorHistoryTable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51.12 | not-accessible | This table represents Communication Error History. | |
| brCommunicationErrorHistoryEntry | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51.12.1 | not-accessible | A row in the Communication ErrorHistory table. Rows cannot be created or deleted. | |
| INT brCommunicationErrorHistoryIndex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51.12.1.1 | INTEGER | read-only | A unique value for the Communication error history. |
| OCT brCommunicationErrorHistoryDescription | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51.12.1.2 | OCTET STRING | read-only | The Communication Error History Description. |
| printPages | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52 | |||
| brPrintPagesTable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.1 | not-accessible | This table represents Print Pages. | |
| brPrintPagesEntry | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.1.1 | not-accessible | A row in the PrintPages table. Rows cannot be created or deleted. | |
| INT brPrintPagesIndex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.1.1.1 | INTEGER | read-only | A unique value for the print pages. |
| INT brPrintPagesPaperSize | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.1.1.2 | INTEGER | read-only | The paper size of print pages. |
| CTR brPrintPages | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.1.1.3 | Counter | read-only | The count of Print pages. |
| brPrintPagesMediaPlaceTable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.11 | not-accessible | This table represents Print Pages of Media Place. | |
| brPrintPagesMediaPlaceEntry | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.11.1 | not-accessible | A row in the PrintPages Media Place table. Rows cannot be created or deleted. | |
| INT brPrintPagesMediaPlaceIndex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.11.1.1 | INTEGER | read-only | A unique value for the print pages of media place. |
| INT brPrintPagesMediaPlaceType | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.11.1.2 | INTEGER | read-only | The place of media. |
| CTR brPrintPagesMediaPlaceCounter | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.11.1.3 | Counter | read-only | The count of Print pages of media place. |
| brPrintPagesFuncTable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.21 | not-accessible | This table represents Print Pages of each function. | |
| brPrintPagesFuncEntry | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.21.1 | not-accessible | A row in the PrintPages Func table. Rows cannot be created or deleted. | |
| INT brPrintPagesFuncIndex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.21.1.1 | INTEGER | read-only | A unique value for the print pages of each function. |
| INT brPrintPagesFuncType | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.21.1.2 | INTEGER | read-only | The kind of function. |
| CTR brPrintPagesFuncCounter | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.21.1.3 | Counter | read-only | The count of Print pages of the function. |
| brPrintPagesPaperTypeTable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.31 | not-accessible | This table represents Print Pages of Paper Type. | |
| brPrintPagesPaperTypeEntry | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.31.1 | not-accessible | A row in the PrintPages Paper Type table. Rows cannot be created or deleted. | |
| INT brPrintPagesPaperTypeIndex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.31.1.1 | INTEGER | read-only | A unique value for the print pages of paper type. |
| INT brPrintPagesPaperTypeType | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.31.1.2 | INTEGER | read-only | The type of paper. |
| CTR brPrintPagesPaperTypeCounter | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.31.1.3 | Counter | read-only | The count of Print pages of paper type. |
| capability | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53 | |||
| copies | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.1 | |||
| INT brCapabilityCopiesMax | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.1.1 | INTEGER | read-only | The maximum value of copies |
| INT brCapabilityCopiesMin | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.1.2 | INTEGER | read-only | The minimum value of copies |
| orientation | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.2 | |||
| INT brCapabilityOrientationCount | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.2.1 | INTEGER | read-only | The number of support of orientation |
| brCapabilityOrientationTable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.2.2 | not-accessible | This table represents capability of orientation. | |
| brCapabilityOrientationEntry | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.2.2.1 | not-accessible | A row in the capability of orientation table. Rows cannot be created or deleted. | |
| INT brCapabilityOrientationIndex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.2.2.1.1 | INTEGER | read-only | A unique value for the capability of orientation. |
| STR brCapabilityOrientationName | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.2.2.1.2 | DisplayString | read-only | The name of orientation currently supported. |
| paper | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.3 | |||
| INT brCapabilityPaperCount | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.3.1 | INTEGER | read-only | The number of kinds of the paper currently supported |
| brCapabilityPaperTable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.3.2 | not-accessible | This table represents capability of paper. | |
| brCapabilityPaperEntry | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.3.2.1 | not-accessible | A row in the capability of paper table. Rows cannot be created or deleted. | |
| INT brCapabilityPaperIndex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.3.2.1.1 | INTEGER | read-only | A unique value for the capability of paper. |
| STR brCapabilityPaperName | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.3.2.1.2 | DisplayString | read-only | The name of paper currently supported. |
| mediatype | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.4 | |||
| INT brCapabilityMediatypeCount | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.4.1 | INTEGER | read-only | The number of kinds of the mediatype currently supported |
| brCapabilityMediatypeTable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.4.2 | not-accessible | This table represents capability of mediatype. | |
| brCapabilityMediatypeEntry | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.4.2.1 | not-accessible | A row in the capability of mediatype table. Rows cannot be created or deleted. | |
| INT brCapabilityMediatypeIndex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.4.2.1.1 | INTEGER | read-only | A unique value for the capability of mediatype. |
| STR brCapabilityMediatypeName | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.4.2.1.2 | DisplayString | read-only | The name of mediatype currently supported. |
| resolution | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.5 | |||
| INT brCapabilityResolutionCount | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.5.1 | INTEGER | read-only | The number of kinds of the resolution currently supported |
| brCapabilityResolutionTable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.5.2 | not-accessible | This table represents capability of resolution. | |
| brCapabilityResolutionEntry | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.5.2.1 | not-accessible | A row in the capability of resolution table. Rows cannot be created or deleted. | |
| INT brCapabilityResolutionIndex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.5.2.1.1 | INTEGER | read-only | A unique value for the capability of resolution. |
| INT brCapabilityResolution | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.5.2.1.2 | INTEGER | read-only | The value of resolution currently supported. |
| countinfo | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54 | |||
| pfkit | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.1 | |||
| INT brPfKitIndexCount | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.1.1 | INTEGER | read-only | Maximum number of PF kit. |
| brPfKitTable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.1.2 | not-accessible | This table represents PF kit. | |
| brPfKitEntry | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.1.2.1 | not-accessible | A row in the PfKit table. Rows cannot be created or deleted. | |
| INT brPfKitIndex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.1.2.1.1 | INTEGER | read-only | A unique value for the PF kit. |
| INT brPfKitType | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.1.2.1.2 | INTEGER | read-only | The PF kit ID. |
| CTR brPfKitCount | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.1.2.1.3 | Counter | read-only | Counter of the PF kit. |
| scancount | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.2 | |||
| INT brScanCountIndexCount | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.2.1 | INTEGER | read-only | Maximum number of Scan place. |
| brScanCountTable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.2.2 | not-accessible | This table represents scan count. | |
| brScanCountEntry | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.2.2.1 | not-accessible | A row in the ScanCount table. Rows cannot be created or deleted. | |
| INT brScanCountIndex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.2.2.1.1 | INTEGER | read-only | A unique value for the scan count place. |
| INT brScanCountType | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.2.2.1.2 | INTEGER | read-only | The scan place ID. |
| CTR brScanCountCounter | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.2.2.1.3 | Counter | read-only | Counter of the scan. |
| firmwareupdatekeyword | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.55 | |||
| INT brFirmwareUpdateKeywordCount | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.55.1 | INTEGER | read-only | The number of Firmware for update the device. |
| brFirmwareUpdateKeywordTable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.55.2 | not-accessible | The table represents the number of Firmware for Update. | |
| brFirmwareUpdateKeywordEntry | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.55.2.1 | not-accessible | A row in the FirmwareUpdateKeyword table. Rows cannot be created or deleted. | |
| INT brFirmwareUpdateKeywordIndex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.55.2.1.1 | INTEGER | read-only | |
| OCT brFirmwareUpdateKeyword | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.55.2.1.2 | OCTET STRING | read-only | The keyword for firemware update the device. |
| printerstatus | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.6 | |||
| INT brStatusSleep | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.6.1 | INTEGER | read-only | Sleeping status 0:ready 1:sleep |
| secret | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.7 | |||
| INT brSecretMPRetry | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.7.1 | INTEGER | read-write | unused |
| INT brSecretReprint | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.7.2 | INTEGER | read-write | Secret Reprint mode 0:Off 111:On 222:Job |
| INT brFontSetting | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.7.3 | INTEGER | read-only | Font Setting 0:Brother Font 1:Agfa Font |
| INT brFontSwitchOn | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.7.4 | INTEGER | read-write | Switch of Agfa Font On |
| INT brFontSwitchOff | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.7.5 | INTEGER | read-write | Switch of Agfa Font Off |
| adminsetting | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.8 | |||
| clockfunction | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.8.1 | |||
| INT brClockFuncTimeStyle | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.8.1.1 | INTEGER | read-write | Time format 0:YMD 1:MDY 2:DMY |
| INT brClockFuncSummerTime | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.8.1.2 | INTEGER | read-write | Summer time 1:Off 2:On |
| INT brClockFuncTimeZone | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.8.1.3 | INTEGER | read-write | TimeZone |
| INT brClockFuncZoneSet | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.8.1.4 | INTEGER | read-write | TimeZone enable 1:Off 2:On |
| interface | 1.3.6.1.4.1.2435.2.4 | |||
| npCard | 1.3.6.1.4.1.2435.2.4.3 | |||
| npSys | 1.3.6.1.4.1.2435.2.4.3.1 | |||
| npConfig | 1.3.6.1.4.1.2435.2.4.3.1.1 | |||
| INT brBasicSettingConfigured | 1.3.6.1.4.1.2435.2.4.3.1.1.1 | INTEGER | read-only | This value indicates that the basic setting is configured or not. The condition entry of this value is model dependent. |
| adminCapa | 1.3.6.1.4.1.2435.2.4.3.1.99 | |||
| OCT brAdminCapability | 1.3.6.1.4.1.2435.2.4.3.1.99.1 | OCTET STRING | read-only | AdminCapability |
| userSetting | 1.3.6.1.4.1.2435.2.4.3.1.100 | |||
| STR brUserPasswordVerify | 1.3.6.1.4.1.2435.2.4.3.1.100.1 | DisplayString | read-write | Submit the print server's user password for verification. An error will be returned if the password is incorrect. |
| STR brUserPassword | 1.3.6.1.4.1.2435.2.4.3.1.100.2 | DisplayString | read-write | Set the print server's user password value. |
| verify | 1.3.6.1.4.1.2435.2.4.3.1.101 | |||
| OCT brpsVerifyPhysAddress | 1.3.6.1.4.1.2435.2.4.3.1.101.1 | OCTET STRING | read-write | For verify physical address. |
| npTcp | 1.3.6.1.4.1.2435.2.4.3.6 | |||
| lpd | 1.3.6.1.4.1.2435.2.4.3.6.99 | |||
| banner | 1.3.6.1.4.1.2435.2.4.3.6.99.1 | |||
| INT brLPDBannerPage | 1.3.6.1.4.1.2435.2.4.3.6.99.1.1 | INTEGER | read-write | LPR banner page 0: disabled. 1: enabled. 2: force to print. |
| npCtl | 1.3.6.1.4.1.2435.2.4.3.7 | |||
| etherN | 1.3.6.1.4.1.2435.2.4.3.7.99 | |||
| eNet | 1.3.6.1.4.1.2435.2.4.3.7.99.1 | |||
| INT brENetModeSupported | 1.3.6.1.4.1.2435.2.4.3.7.99.1.1 | INTEGER | read-only | ENet Mode 0:not supported 1:supported |
| INT brENetMode | 1.3.6.1.4.1.2435.2.4.3.7.99.1.2 | INTEGER | read-write | ENet Mode 0:Auto 1:FD100B 2:100Base 3:FD10B 4:10BASE |
| npPort | 1.3.6.1.4.1.2435.2.4.3.13 | |||
| funa | 1.3.6.1.4.1.2435.2.4.3.13.10 | |||
| INT brFindPort | 1.3.6.1.4.1.2435.2.4.3.13.10.1 | INTEGER | read-write | |
| INT brFindTime | 1.3.6.1.4.1.2435.2.4.3.13.10.2 | INTEGER | read-write | |
| npSet | 1.3.6.1.4.1.2435.2.4.3.99 | |||
| dns | 1.3.6.1.4.1.2435.2.4.3.99.1 | |||
| INT brDNSSupported | 1.3.6.1.4.1.2435.2.4.3.99.1.1 | INTEGER | read-only | DNS resolver 0:not supported 1:supported This is the obsolete MIB that is not currently used. |
| OCT brPrimaryDNSIP | 1.3.6.1.4.1.2435.2.4.3.99.1.2 | OCTET STRING | read-write | Primary DNS IP Address. This is the obsolete MIB that is not currently used. |
| OCT brSecondaryDNSIP | 1.3.6.1.4.1.2435.2.4.3.99.1.3 | OCTET STRING | read-write | Secondary DNS IP Address This is the obsolete MIB that is not currently used. |
| INT brDNSIPSetup | 1.3.6.1.4.1.2435.2.4.3.99.1.4 | INTEGER | read-write | DNS mode 1:static 2:auto |
| INT brTCPIPConnectTime | 1.3.6.1.4.1.2435.2.4.3.99.1.5 | INTEGER | read-write | TCP/IP connect time. |
| INT brAdvancedDNSSupported | 1.3.6.1.4.1.2435.2.4.3.99.1.6 | INTEGER | read-only | DNS resolver 0:not supported 1:supported |
| IP brPrimaryDNSIPAddress | 1.3.6.1.4.1.2435.2.4.3.99.1.7 | IpAddress | read-write | Primary DNS IP Address |
| IP brSecondaryDNSIPAddress | 1.3.6.1.4.1.2435.2.4.3.99.1.8 | IpAddress | read-write | Secondary DNS IP Address |
| OCT brPOP3ServerName | 1.3.6.1.4.1.2435.2.4.3.99.1.9 | OCTET STRING | read-write | The FQDN name of the POP3 server. |
| OCT brSMTPServerName | 1.3.6.1.4.1.2435.2.4.3.99.1.10 | OCTET STRING | read-write | The FQDN name of the SMTP server. |
| pushstatus | 1.3.6.1.4.1.2435.2.4.3.99.2 | |||
| INT brPushStatusSupported | 1.3.6.1.4.1.2435.2.4.3.99.2.1 | INTEGER | read-only | Notification 0:not supported 1:supported |
| priadmin | 1.3.6.1.4.1.2435.2.4.3.99.2.2 | |||
| OCT brPriMailAddress | 1.3.6.1.4.1.2435.2.4.3.99.2.2.1 | OCTET STRING | read-write | Primary Mail Address |
| INT brPriError | 1.3.6.1.4.1.2435.2.4.3.99.2.2.2 | INTEGER | read-write | Primary Error |
| secadmin | 1.3.6.1.4.1.2435.2.4.3.99.2.3 | |||
| OCT brSecMailAddress | 1.3.6.1.4.1.2435.2.4.3.99.2.3.1 | OCTET STRING | read-write | Secondary Mail Address |
| INT brSecError | 1.3.6.1.4.1.2435.2.4.3.99.2.3.2 | INTEGER | read-write | Secondary Error |
| INT brNotificationCount | 1.3.6.1.4.1.2435.2.4.3.99.2.4 | INTEGER | read-only | Maximum number of Notification Method. |
| brNotificationTable | 1.3.6.1.4.1.2435.2.4.3.99.2.5 | not-accessible | This table represents Notification Method. | |
| brNotificationEntry | 1.3.6.1.4.1.2435.2.4.3.99.2.5.1 | not-accessible | A row in the Notification table. Rows cannot be created or deleted. | |
| INT brNotificationIndex | 1.3.6.1.4.1.2435.2.4.3.99.2.5.1.1 | INTEGER | read-only | The number. |
| OCT brNotificationAddress | 1.3.6.1.4.1.2435.2.4.3.99.2.5.1.2 | OCTET STRING | read-write | The Notification Address. |
| INT brNotificationStatusGroup | 1.3.6.1.4.1.2435.2.4.3.99.2.5.1.3 | INTEGER | read-write | The Notification Status group |
| INT brNotificationShowURLInfo | 1.3.6.1.4.1.2435.2.4.3.99.2.5.1.4 | INTEGER | read-write | The setting of show URL infomation at Notification mail. |
| OCT brNotificationErrorRule | 1.3.6.1.4.1.2435.2.4.3.99.2.5.1.5 | OCTET STRING | read-write | The setting of sending requirements for Notification. |
| INT brNotificationRestoration | 1.3.6.1.4.1.2435.2.4.3.99.2.5.1.6 | INTEGER | read-write | The setting of Restoration Notification mail |
| OCT brPrintersEmailaddress | 1.3.6.1.4.1.2435.2.4.3.99.2.6 | OCTET STRING | read-write | The Printers Email Address. |
| OCT brNotificationVersion | 1.3.6.1.4.1.2435.2.4.3.99.2.7 | OCTET STRING | read-only | The version of Notification |
| INT brShowIPAddressInfo | 1.3.6.1.4.1.2435.2.4.3.99.2.8 | INTEGER | read-write | The setting of show IP address infomation at Notification mail. |
| brNotificationRuleTable | 1.3.6.1.4.1.2435.2.4.3.99.2.50 | not-accessible | This table represents Notification Method. | |
| brNotificationRuleEntry | 1.3.6.1.4.1.2435.2.4.3.99.2.50.1 | not-accessible | A row in the Notification rule table. Rows cannot be created or deleted. | |
| INT brNotificationRuleIndex | 1.3.6.1.4.1.2435.2.4.3.99.2.50.1.1 | INTEGER | read-only | The number. |
| INT brNotificationStatusID | 1.3.6.1.4.1.2435.2.4.3.99.2.50.1.2 | INTEGER | read-write | The Notification Status group ID |
| INT brNotificationMainRule | 1.3.6.1.4.1.2435.2.4.3.99.2.50.1.3 | INTEGER | read-write | The main rule of Notification setting. |
| INT brNotificationRuleValue | 1.3.6.1.4.1.2435.2.4.3.99.2.50.1.4 | INTEGER | read-write | The value of Notification setting. |
| pjl | 1.3.6.1.4.1.2435.2.4.3.99.3 | |||
| pjlinfo | 1.3.6.1.4.1.2435.2.4.3.99.3.1 | |||
| brPJLInfoOptionsTable | 1.3.6.1.4.1.2435.2.4.3.99.3.1.1 | not-accessible | This table represents PJLInfoOptions. | |
| brPJLInfoOptionsEntry | 1.3.6.1.4.1.2435.2.4.3.99.3.1.1.1 | not-accessible | A row in the PJLInfoOptions table. Rows cannot be created or deleted. | |
| INT brPJLInfoOptionsIndex | 1.3.6.1.4.1.2435.2.4.3.99.3.1.1.1.1 | INTEGER | read-only | The number. |
| OCT brPJLInfoOptions | 1.3.6.1.4.1.2435.2.4.3.99.3.1.1.1.2 | OCTET STRING | read-only | The PJLInfoOptions. |
| brPJLInfoIntrayconfigTable | 1.3.6.1.4.1.2435.2.4.3.99.3.1.2 | not-accessible | This table represents PJLInfoIntrayconfig. | |
| brPJLInfoIntrayconfigEntry | 1.3.6.1.4.1.2435.2.4.3.99.3.1.2.1 | not-accessible | A row in the PJLInfoIntrayconfig table. Rows cannot be created or deleted. | |
| INT brPJLInfoIntrayconfigIndex | 1.3.6.1.4.1.2435.2.4.3.99.3.1.2.1.1 | INTEGER | read-only | The number. |
| OCT brPJLInfoIntrayconfig | 1.3.6.1.4.1.2435.2.4.3.99.3.1.2.1.2 | OCTET STRING | read-only | The PJLInfoIntrayconfig. |
| brPJLInfoOuttrayconfigTable | 1.3.6.1.4.1.2435.2.4.3.99.3.1.3 | not-accessible | This table represents PJLInfoOuttrayconfig. | |
| brPJLInfoOuttrayconfigEntry | 1.3.6.1.4.1.2435.2.4.3.99.3.1.3.1 | not-accessible | A row in the PJLInfoOuttrayconfig table. Rows cannot be created or deleted. | |
| INT brPJLInfoOuttrayconfigIndex | 1.3.6.1.4.1.2435.2.4.3.99.3.1.3.1.1 | INTEGER | read-only | The number. |
| OCT brPJLInfoOuttrayconfig | 1.3.6.1.4.1.2435.2.4.3.99.3.1.3.1.2 | OCTET STRING | read-only | The PJLInfoOuttrayconfig. |
| brPJLInfoDXconfigTable | 1.3.6.1.4.1.2435.2.4.3.99.3.1.4 | not-accessible | This table represents PJLInfoDXconfig. | |
| brPJLInfoDXconfigEntry | 1.3.6.1.4.1.2435.2.4.3.99.3.1.4.1 | not-accessible | A row in the PJLInfoDXconfig table. Rows cannot be created or deleted. | |
| INT brPJLInfoDXconfigIndex | 1.3.6.1.4.1.2435.2.4.3.99.3.1.4.1.1 | INTEGER | read-only | The number. |
| OCT brPJLInfoDXconfig | 1.3.6.1.4.1.2435.2.4.3.99.3.1.4.1.2 | OCTET STRING | read-only | The PJLInfoDXconfig. |
| brPJLInfoStorageconfigTable | 1.3.6.1.4.1.2435.2.4.3.99.3.1.5 | not-accessible | This table represents PJLInfoStorageconfig. | |
| brPJLInfoStorageconfigEntry | 1.3.6.1.4.1.2435.2.4.3.99.3.1.5.1 | not-accessible | A row in the PJLInfoStorageconfig table. Rows cannot be created or deleted. | |
| INT brPJLInfoStorageconfigIndex | 1.3.6.1.4.1.2435.2.4.3.99.3.1.5.1.1 | INTEGER | read-only | The number. |
| OCT brPJLInfoStorageconfig | 1.3.6.1.4.1.2435.2.4.3.99.3.1.5.1.2 | OCTET STRING | read-only | The PJLInfoStorageconfig. |
| brPJLInfoFirmwareUpdateconfigTable | 1.3.6.1.4.1.2435.2.4.3.99.3.1.6 | not-accessible | This table represents PJLInfoFirmwareUpdateconfig. | |
| brPJLInfoFirmwareUpdateconfigEntry | 1.3.6.1.4.1.2435.2.4.3.99.3.1.6.1 | not-accessible | A row in the PJLInfoFirmwareUpdateconfig table. Rows cannot be created or deleted. | |
| INT brPJLInfoFirmwareUpdateconfigIndex | 1.3.6.1.4.1.2435.2.4.3.99.3.1.6.1.1 | INTEGER | read-only | The number. |
| OCT brPJLInfoFirmwareUpdateconfig | 1.3.6.1.4.1.2435.2.4.3.99.3.1.6.1.2 | OCTET STRING | read-only | The PJLInfoFirmwareUpdateconfig. |
| eMailReports | 1.3.6.1.4.1.2435.2.4.3.99.4 | |||
| INT brEmailReportsSupported | 1.3.6.1.4.1.2435.2.4.3.99.4.1 | INTEGER | read-only | E-mail reports 0:not supported 1:supported |
| INT brEmailReportsCount | 1.3.6.1.4.1.2435.2.4.3.99.4.2 | INTEGER | read-only | The number of Administrator for E-mail reports. |
| brEmailReportsTable | 1.3.6.1.4.1.2435.2.4.3.99.4.11 | not-accessible | This table represents E-mail reports. | |
| brEmailReportsEntry | 1.3.6.1.4.1.2435.2.4.3.99.4.11.1 | not-accessible | A row in the BrEmailReportsEntry table. Rows cannot be created or deleted. | |
| INT brEmailReportsIndex | 1.3.6.1.4.1.2435.2.4.3.99.4.11.1.1 | INTEGER | read-only | The number. |
| OCT brEmailReportsAddress | 1.3.6.1.4.1.2435.2.4.3.99.4.11.1.2 | OCTET STRING | read-write | The E-mail address of Administrator for E-mail reports. |
| INT brEmailReportsFrequency | 1.3.6.1.4.1.2435.2.4.3.99.4.11.1.3 | INTEGER | read-write | The frequency of sending E-mail reports. |
| OCT brEmailReportsTime | 1.3.6.1.4.1.2435.2.4.3.99.4.11.1.4 | OCTET STRING | read-write | The time setting for E-mail reports. |
| INT brEmailReportsWeek | 1.3.6.1.4.1.2435.2.4.3.99.4.11.1.5 | INTEGER | read-write | The setting of day of the week for E-mail reports. |
| INT brEmailReportsDate | 1.3.6.1.4.1.2435.2.4.3.99.4.11.1.6 | INTEGER | read-write | The setting of day for E-mail reports when real time clock exists. |
| INT brEmailReportsSendReportNow | 1.3.6.1.4.1.2435.2.4.3.99.4.11.1.7 | INTEGER | read-write | The setting of Send Report Now function for E-mail reports. |
| INT brEmailReportsSendReportatPowerOn | 1.3.6.1.4.1.2435.2.4.3.99.4.11.1.8 | INTEGER | read-write | The setting of Send Report at PowerOn for E-mail reports. |
| INT brEmailReportsNoRTCFrequency | 1.3.6.1.4.1.2435.2.4.3.99.4.11.1.9 | INTEGER | read-write | The setting of day for E-mail reports when real time clock does not exists. |
| INT brEmailReportsReportFormat | 1.3.6.1.4.1.2435.2.4.3.99.4.11.1.10 | INTEGER | read-write | The setting of ReportFormat for E-mail reports. |
| wireless | 1.3.6.1.4.1.2435.2.4.3.100 | |||
| wlInfo | 1.3.6.1.4.1.2435.2.4.3.100.1 | |||
| wlCapability | 1.3.6.1.4.1.2435.2.4.3.100.1.1 | |||
| INT brpsWLanDot11Supported | 1.3.6.1.4.1.2435.2.4.3.100.1.1.1 | INTEGER | read-only | Flags per bit. 802.11a bit1=1 802.11b bit2=1 802.11g bit3=1 |
| OCT brpsWLanAvailableChannel | 1.3.6.1.4.1.2435.2.4.3.100.1.1.2 | OCTET STRING | read-only | The available channel list. |
| INT brpsWLanCapabilityEncryptModeCount | 1.3.6.1.4.1.2435.2.4.3.100.1.1.3 | INTEGER | read-only | index |
| brpsWLanCapabilityEncryptModeTable | 1.3.6.1.4.1.2435.2.4.3.100.1.1.4 | not-accessible | ||
| brpsWLanCapabilityEncryptModeEntry | 1.3.6.1.4.1.2435.2.4.3.100.1.1.4.1 | not-accessible | ||
| INT brpsWLanCapabilityEncryptModeIndex | 1.3.6.1.4.1.2435.2.4.3.100.1.1.4.1.1 | INTEGER | read-only | index |
| INT brpsWLanCapabilityEncryptModeType | 1.3.6.1.4.1.2435.2.4.3.100.1.1.4.1.2 | INTEGER | read-only | Encrypt Mode Type |
| OCT brpsWLanCapabilityEncryptModeDescription | 1.3.6.1.4.1.2435.2.4.3.100.1.1.4.1.3 | OCTET STRING | read-only | Encrypt Mode description |
| INT brpsWLanCapabilityEncryptModeSupported | 1.3.6.1.4.1.2435.2.4.3.100.1.1.4.1.4 | INTEGER | read-only | 0: Not Supported 1: Supported |
| INT brpsWLanCapabilityAuthModeCount | 1.3.6.1.4.1.2435.2.4.3.100.1.1.5 | INTEGER | read-only | index |
| brpsWLanCapabilityAuthModeTable | 1.3.6.1.4.1.2435.2.4.3.100.1.1.6 | not-accessible | ||
| brpsWLanCapabilityAuthModeEntry | 1.3.6.1.4.1.2435.2.4.3.100.1.1.6.1 | not-accessible | ||
| INT brpsWLanCapabilitAuthModeIndex | 1.3.6.1.4.1.2435.2.4.3.100.1.1.6.1.1 | INTEGER | read-only | index |
| INT brpsWLanCapabilityAuthModeType | 1.3.6.1.4.1.2435.2.4.3.100.1.1.6.1.2 | INTEGER | read-only | Auth Mode Type |
| OCT brpsWLanCapabilityAuthModeDescription | 1.3.6.1.4.1.2435.2.4.3.100.1.1.6.1.3 | OCTET STRING | read-only | Auth Mode description |
| INT brpsWLanCapabilityAuthModeSupported | 1.3.6.1.4.1.2435.2.4.3.100.1.1.6.1.4 | INTEGER | read-only | 0: Not Supported 1: Supported |
| INT brpsWLanCapabilityAuthEAPCount | 1.3.6.1.4.1.2435.2.4.3.100.1.1.7 | INTEGER | read-only | index |
| brpsWLanCapabilityAuthEAPTable | 1.3.6.1.4.1.2435.2.4.3.100.1.1.8 | not-accessible | ||
| brpsWLanCapabilityAuthEAPEntry | 1.3.6.1.4.1.2435.2.4.3.100.1.1.8.1 | not-accessible | ||
| INT brpsWLanCapabilityAuthEAPIndex | 1.3.6.1.4.1.2435.2.4.3.100.1.1.8.1.1 | INTEGER | read-only | index |
| INT brpsWLanCapabilityAuthEAPType | 1.3.6.1.4.1.2435.2.4.3.100.1.1.8.1.2 | INTEGER | read-only | Auth EAP Type |
| OCT brpsWLanCapabilityAuthEAPDescription | 1.3.6.1.4.1.2435.2.4.3.100.1.1.8.1.3 | OCTET STRING | read-only | Auth EAP description |
| INT brpsWLanCapabilityAuthEAPSupported | 1.3.6.1.4.1.2435.2.4.3.100.1.1.8.1.4 | INTEGER | read-only | 0: Not Supported 1: Supported |
| INT brpsWLanCapabilityAuthEAPSupportAuthentication | 1.3.6.1.4.1.2435.2.4.3.100.1.1.8.1.5 | INTEGER | read-only | put supported authentication protocol as bit. 1bit:802.1X 2bit:WPA 3bit:WPA2 4bit:CCKM |
| INT brpsWLanCapabilityAuthEAPSupportEncryption | 1.3.6.1.4.1.2435.2.4.3.100.1.1.8.1.6 | INTEGER | read-only | put supported encryption as bit. 1bit:WEP 2bit:CKIP 3bit:TKIP 4bit:AES |
| wlGeneralInfo | 1.3.6.1.4.1.2435.2.4.3.100.1.2 | |||
| INT brpsWLanDestination | 1.3.6.1.4.1.2435.2.4.3.100.1.2.1 | INTEGER | read-only | The destination of this NIC. |
| INT brpsWLanTransmitLevel | 1.3.6.1.4.1.2435.2.4.3.100.1.2.2 | INTEGER | read-only | The level of the transmitting power. |
| INT brpsPit3WLanTestStatus | 1.3.6.1.4.1.2435.2.4.3.100.1.2.3 | INTEGER | read-only | The test status of pit3 for WLAN. |
| wlNetSearch | 1.3.6.1.4.1.2435.2.4.3.100.1.11 | |||
| INT brpsWLanNetSearchSupported | 1.3.6.1.4.1.2435.2.4.3.100.1.11.1 | INTEGER | read-only | 0 indicates the Wireless network serch function is not supported. 1 indicates the Wireless network serch function is implemented by the firmware |
| OCT brpsAvailableWLanScan | 1.3.6.1.4.1.2435.2.4.3.100.1.11.2 | OCTET STRING | read-write | Read: unsupported(1), supported(2) Set: = [;;[;]] |
| INT brpsAvailableWLanScanWaitTime | 1.3.6.1.4.1.2435.2.4.3.100.1.11.3 | INTEGER | read-only | Scan Wait Time |
| INT brpsAvailableWLanCount | 1.3.6.1.4.1.2435.2.4.3.100.1.11.10 | INTEGER | read-only | Available wireless LAN count. |
| brpsAvailableWLanTable | 1.3.6.1.4.1.2435.2.4.3.100.1.11.11 | not-accessible | This table represents Available Wireless LAN Info. | |
| brpsAvailableWLanEntry | 1.3.6.1.4.1.2435.2.4.3.100.1.11.11.1 | not-accessible | A row in the brpsAvailableWLanTable table. Rows cannot be created or deleted. | |
| INT brpsAvailableWLanIndex | 1.3.6.1.4.1.2435.2.4.3.100.1.11.11.1.1 | INTEGER | read-only | The number. |
| OCT brpsAvailableWLanName | 1.3.6.1.4.1.2435.2.4.3.100.1.11.11.1.2 | OCTET STRING | read-only | The available wireless LAN name. |
| INT brpsAvailableWLanMode | 1.3.6.1.4.1.2435.2.4.3.100.1.11.11.1.3 | INTEGER | read-only | The available wireless LAN mode. |
| INT brpsAvailableWLanCommMode | 1.3.6.1.4.1.2435.2.4.3.100.1.11.11.1.4 | INTEGER | read-only | The available wireless LAN communication mode. |
| INT brpsAvailableWLanChannel | 1.3.6.1.4.1.2435.2.4.3.100.1.11.11.1.5 | INTEGER | read-only | The available wireless LAN channel. |
| INT brpsAvailableWLanPowerLevel | 1.3.6.1.4.1.2435.2.4.3.100.1.11.11.1.6 | INTEGER | read-only | The available wireless LAN power level. |
| INT brpsAvailableWLanAuthMode | 1.3.6.1.4.1.2435.2.4.3.100.1.11.11.1.7 | INTEGER | read-only | The available wireless LAN authentication mode. |
| INT brpsAvailableWLanEncryptMode | 1.3.6.1.4.1.2435.2.4.3.100.1.11.11.1.8 | INTEGER | read-only | The available wireless LAN encryption mode. |
| wlAOSS | 1.3.6.1.4.1.2435.2.4.3.100.1.12 | |||
| INT brpsWLanAOSSSupported | 1.3.6.1.4.1.2435.2.4.3.100.1.12.1 | INTEGER | read-only | 0 indicates AOSS is not supported. 1 indicates AOSS is supported. |
| INT brpsWLanAOSSIsRunnning | 1.3.6.1.4.1.2435.2.4.3.100.1.12.2 | INTEGER | read-only | |
| wlSES | 1.3.6.1.4.1.2435.2.4.3.100.1.13 | |||
| INT brpsWLanSESSupported | 1.3.6.1.4.1.2435.2.4.3.100.1.13.1 | INTEGER | read-only | 0 indicates SES is not supported. 1 indicates SES is supported. |
| wlWPS | 1.3.6.1.4.1.2435.2.4.3.100.1.14 | |||
| INT brpsWLanWPSSupported | 1.3.6.1.4.1.2435.2.4.3.100.1.14.1 | INTEGER | read-only | 0 indicates WPS is not supported. 1 indicates WPS is supported. |
| INT brpsWLanWPSResult | 1.3.6.1.4.1.2435.2.4.3.100.1.14.2 | INTEGER | read-only | 0 indicates WPS is successful. 1 indicates WPS is not successful. -1 indicates WPS is being set up. |
| wlSimpleWizard | 1.3.6.1.4.1.2435.2.4.3.100.1.15 | |||
| INT brWlanSimpleWizardSupported | 1.3.6.1.4.1.2435.2.4.3.100.1.15.1 | INTEGER | read-only | WLAN Simple Wizard support information. 0 indicates Simple Wizard is not supported. 1 indicates Simple Wizard is supported. |
| OCT brWlanSimpleWizardPassword | 1.3.6.1.4.1.2435.2.4.3.100.1.15.2 | OCTET STRING | read-write | Simple Wizard Password. Max size 64 |
| wlSetup | 1.3.6.1.4.1.2435.2.4.3.100.11 | |||
| wlGeneral | 1.3.6.1.4.1.2435.2.4.3.100.11.1 | |||
| INT brpsWLanAPSetupMode | 1.3.6.1.4.1.2435.2.4.3.100.11.1.1 | INTEGER | read-only | AP setup mode status. |
| INT brpsWLanMode | 1.3.6.1.4.1.2435.2.4.3.100.11.1.2 | INTEGER | read-write | Wireless LAN mode. |
| OCT brpsWLanName | 1.3.6.1.4.1.2435.2.4.3.100.11.1.3 | OCTET STRING | read-write | The SSID setting. |
| INT brpsWLanCommMode | 1.3.6.1.4.1.2435.2.4.3.100.11.1.4 | INTEGER | read-write | Wireless LAN communication mode. |
| INT brpsWLanChannel | 1.3.6.1.4.1.2435.2.4.3.100.11.1.5 | INTEGER | read-write | Wireless LAN channel setting. |
| wlAdvanced | 1.3.6.1.4.1.2435.2.4.3.100.11.5 | |||
| INT brpsWLanCtsMode | 1.3.6.1.4.1.2435.2.4.3.100.11.5.1 | INTEGER | read-write | Wireless LAN CTS mode setting. |
| INT brpsWLanCtsRate | 1.3.6.1.4.1.2435.2.4.3.100.11.5.2 | INTEGER | read-write | Wireless LAN CTS rate setting. However, the unit is 1/10. |
| INT brpsWLanCtsType | 1.3.6.1.4.1.2435.2.4.3.100.11.5.3 | INTEGER | read-write | Wireless LAN CTS type setting. |
| INT brpsWLanRtsCtsThreshold | 1.3.6.1.4.1.2435.2.4.3.100.11.5.4 | INTEGER | read-write | Wireless LAN RTS/CTS threshold setting. |
| INT brpsWLanLengthThreshold | 1.3.6.1.4.1.2435.2.4.3.100.11.5.5 | INTEGER | read-write | Wireless LAN length threshold setting. |
| INT brpsWLanDataRetry | 1.3.6.1.4.1.2435.2.4.3.100.11.5.6 | INTEGER | read-write | Wireless LAN DATA retyr setting. |
| INT brpsWLanTransmitPowerSetting | 1.3.6.1.4.1.2435.2.4.3.100.11.5.7 | INTEGER | read-write | Wireless LAN transmit power setting. |
| INT brpsWLanDeviceType | 1.3.6.1.4.1.2435.2.4.3.100.11.5.8 | INTEGER | read-write | Wireless LAN operation mode setting. |
| wlAssociate | 1.3.6.1.4.1.2435.2.4.3.100.11.11 | |||
| INT brpsWLanEncryptMode | 1.3.6.1.4.1.2435.2.4.3.100.11.11.1 | INTEGER | read-write | Wireless LAN encrypt mode. |
| INT brpsWLanAuthMode | 1.3.6.1.4.1.2435.2.4.3.100.11.11.11 | INTEGER | read-write | Wireless LAN authenticate mode. |
| INT brpsWLanAuthEAP | 1.3.6.1.4.1.2435.2.4.3.100.11.11.12 | INTEGER | read-write | Wireless LAN authenticate EAP. |
| OCT brpsWLanAuthUserID | 1.3.6.1.4.1.2435.2.4.3.100.11.11.13 | OCTET STRING | read-write | Wireless LAN authenticate user ID. |
| OCT brpsWLanAuthUserPass | 1.3.6.1.4.1.2435.2.4.3.100.11.11.14 | OCTET STRING | read-write | Wireless LAN authenticate user password. |
| INT brpsWLanAssociate | 1.3.6.1.4.1.2435.2.4.3.100.11.11.21 | INTEGER | read-write | Wireless LAN associate. |
| INT brpsWLanAssociateTestResult | 1.3.6.1.4.1.2435.2.4.3.100.11.11.22 | INTEGER | read-only | Wireless LAN associate test result. 0 indicates cleared. |
| INT brpsWLanAssociateResult | 1.3.6.1.4.1.2435.2.4.3.100.11.11.23 | INTEGER | read-only | Wireless LAN associate result. 0 indicates cleared. |
| INT brpsWLanAssociateTestSupported | 1.3.6.1.4.1.2435.2.4.3.100.11.11.24 | INTEGER | read-only | 0 indicates the Wireless network Associate Test function is not supported. 1 indicates the Wireless network Associate Test function is implemented by the firmware |
| wlWEP | 1.3.6.1.4.1.2435.2.4.3.100.11.11.101 | |||
| INT brpsWLanWepKeyDefaultIndex | 1.3.6.1.4.1.2435.2.4.3.100.11.11.101.1 | INTEGER | read-write | The value of brpsWLanWepKeyIndex corresponding to the default setting. |
| brpsWLanWepKeyTable | 1.3.6.1.4.1.2435.2.4.3.100.11.11.101.11 | not-accessible | This table represents WEP KEY Info. | |
| brpsWLanWepKeyEntry | 1.3.6.1.4.1.2435.2.4.3.100.11.11.101.11.1 | not-accessible | A row in the brpsWLanWepKeyTable table. Rows cannot be created or deleted. | |
| INT brpsWLanWepKeyIndex | 1.3.6.1.4.1.2435.2.4.3.100.11.11.101.11.1.1 | INTEGER | read-only | The number. |
| INT brpsWLanWepKeySize | 1.3.6.1.4.1.2435.2.4.3.100.11.11.101.11.1.2 | INTEGER | read-write | The WEP KEY size. |
| INT brpsWLanWepKeyType | 1.3.6.1.4.1.2435.2.4.3.100.11.11.101.11.1.3 | INTEGER | read-write | The WEP KEY type. |
| OCT brpsWLanWepKey | 1.3.6.1.4.1.2435.2.4.3.100.11.11.101.11.1.4 | OCTET STRING | read-write | The WEP KEY. |
| wlWPA | 1.3.6.1.4.1.2435.2.4.3.100.11.11.102 | |||
| OCT brpsWLanNetworkKey | 1.3.6.1.4.1.2435.2.4.3.100.11.11.102.1 | OCTET STRING | read-write | The WPA-PSK. |
| wlTKIP | 1.3.6.1.4.1.2435.2.4.3.100.11.11.103 | |||
| INT brpsWLanTKIPChangeInterval | 1.3.6.1.4.1.2435.2.4.3.100.11.11.103.1 | INTEGER | read-write | TKIP Interval (s) |
| wlLEAP | 1.3.6.1.4.1.2435.2.4.3.100.11.11.104 | |||
| INT brpsWLanLEAPTimeout | 1.3.6.1.4.1.2435.2.4.3.100.11.11.104.1 | INTEGER | read-write | Leap timeout (s) |
| wlStatus | 1.3.6.1.4.1.2435.2.4.3.100.21 | |||
| wlGeneralStatus | 1.3.6.1.4.1.2435.2.4.3.100.21.1 | |||
| INT brpsWLanOperatingMode | 1.3.6.1.4.1.2435.2.4.3.100.21.1.1 | INTEGER | read-only | The mode which is actually operating. off(0), dot11a(1), dot11b(2), dot11g(3) |
| INT brpsWLanRSSLevel | 1.3.6.1.4.1.2435.2.4.3.100.21.1.2 | INTEGER | read-only | Wireless LAN RSS Level. |
| INT brpsWLanCommSpeed | 1.3.6.1.4.1.2435.2.4.3.100.21.1.3 | INTEGER | read-only | Wireless LAN communication speed. However, the unit is 1/10. |
| INT brpsWLanOperatingChannel | 1.3.6.1.4.1.2435.2.4.3.100.21.1.4 | INTEGER | read-only | Wireless LAN operating channel. |
| OCT brpsWLanOperatingName | 1.3.6.1.4.1.2435.2.4.3.100.21.1.5 | OCTET STRING | read-only | Wireless LAN operating SSID Name. |
| INT brpsWLanOperatingCommMode | 1.3.6.1.4.1.2435.2.4.3.100.21.1.6 | INTEGER | read-only | Wireless LAN operating communication mode. off(0), infrastructure(1), ad-Hoc-WiFi(2), ad-Hoc(3) |
| INT brpsWLanOperatingEncryptMode | 1.3.6.1.4.1.2435.2.4.3.100.21.1.7 | INTEGER | read-only | Wireless LAN operating encrypt mode. off(0), none(1), wep(2), tkip(3), aes(4), ckip(5) |
| INT brpsWLanOperatingAuthMode | 1.3.6.1.4.1.2435.2.4.3.100.21.1.8 | INTEGER | read-only | Wireless LAN operating authenticate mode. off(0), openSystem(1), sharedKey(2), wpa-psk(3), wpa-none(4), wpa(5), wpa2(6), leap(7), eapfast-none(8), eapfast-mschapv2(9), eapfast-gtc(10), eapfast-tls(11), wpa2-psk(12) |
| INT brpsWLanOperatingWepKeyDefaultIndex | 1.3.6.1.4.1.2435.2.4.3.100.21.1.9 | INTEGER | read-only | Wireless LAN operating WepKeyDefaultIndex. |
| brnetConfig | 1.3.6.1.4.1.2435.2.4.3.1240 | |||
| brconfig | 1.3.6.1.4.1.2435.2.4.3.1240.1 | |||
| STR brpsNodeName | 1.3.6.1.4.1.2435.2.4.3.1240.1.1 | DisplayString | read-write | The node name of this print server. |
| STR brpsSerialNumber | 1.3.6.1.4.1.2435.2.4.3.1240.1.2 | DisplayString | read-only | The serial number of this print server. |
| INT brpsHardwareType | 1.3.6.1.4.1.2435.2.4.3.1240.1.3 | INTEGER | read-only | Hardware type of the print server. |
| STR brpsMainRevision | 1.3.6.1.4.1.2435.2.4.3.1240.1.4 | DisplayString | read-only | Revision level of the Print Server firmware suitable for display. This object may be read but not written. |
| STR brpsBootRevision | 1.3.6.1.4.1.2435.2.4.3.1240.1.5 | DisplayString | read-only | Revision level of the boot firmware (if applicable) suitable for display. This object may be read but not written. |
| STR brpsPasswordVerify | 1.3.6.1.4.1.2435.2.4.3.1240.1.6 | DisplayString | read-write | Submit the print server's password for verification. An error will be returned if the password is incorrect. |
| STR brpsPassword | 1.3.6.1.4.1.2435.2.4.3.1240.1.7 | DisplayString | read-write | Set the print server's password value. |
| STR brpsMIBVersion | 1.3.6.1.4.1.2435.2.4.3.1240.1.8 | DisplayString | read-only | Revision level of the private MIB implemented by the device. For example: 1.0 This object may be read but not written. |
| STR brpsOEMString | 1.3.6.1.4.1.2435.2.4.3.1240.1.9 | DisplayString | read-only | OEM string setting for the print server. This object may be read but not written. |
| INT brpsMIBMajor | 1.3.6.1.4.1.2435.2.4.3.1240.1.10 | INTEGER | read-only | MIB major version number. |
| INT brpsMIBMinor | 1.3.6.1.4.1.2435.2.4.3.1240.1.11 | INTEGER | read-only | MIB minor version number. |
| STR brpsServerDescription | 1.3.6.1.4.1.2435.2.4.3.1240.1.12 | DisplayString | read-write | Product name of print server. For example: NC-3100h This object may be read but not written. |
| INT brpsEnetMode | 1.3.6.1.4.1.2435.2.4.3.1240.1.13 | INTEGER | read-write | Ethernet type. |
| INT brpsFlashROMSize | 1.3.6.1.4.1.2435.2.4.3.1240.1.14 | INTEGER | read-only | Flash ROM Size of print server (MBytes). |
| STR brpsSNMPGetCommunity | 1.3.6.1.4.1.2435.2.4.3.1240.1.15 | DisplayString | read-only | SNMP Get Community Name. |
| INT brpsSNMPJetAdmin | 1.3.6.1.4.1.2435.2.4.3.1240.1.16 | INTEGER | read-only | 0 indicates the JetAdmin compatibility mode is not enabled. 1 indicates JetAdmin compatibility mode is enabled. |
| STR brpsSNMPSetCommunity1 | 1.3.6.1.4.1.2435.2.4.3.1240.1.17 | DisplayString | read-only | SNMP Set Community Name #1. |
| STR brpsSNMPSetCommunity2 | 1.3.6.1.4.1.2435.2.4.3.1240.1.18 | DisplayString | read-only | SNMP Set Community Name #2. |
| OCT brSupportedInfo | 1.3.6.1.4.1.2435.2.4.3.1240.1.200 | OCTET STRING | read-only | |
| brcontrol | 1.3.6.1.4.1.2435.2.4.3.1240.2 | |||
| INT brpsTestPage | 1.3.6.1.4.1.2435.2.4.3.1240.2.1 | INTEGER | read-write | Setting any value generates a test page on all ports. |
| INT brpsSetDefault | 1.3.6.1.4.1.2435.2.4.3.1240.2.2 | INTEGER | read-write | Setting the value 5AA5h (23205) resets all parameters to their factory default value. |
| INT brpsReset | 1.3.6.1.4.1.2435.2.4.3.1240.2.3 | INTEGER | read-write | Setting the value 55AAh (21930) causes the print server to perform a soft reset. |
| INT brpsProtectModeEnable | 1.3.6.1.4.1.2435.2.4.3.1240.2.4 | INTEGER | read-only | 0 indicates the protect mode is not enabled. 1 indicates protect mode is enabled. |
| STR brpsProtectPassword | 1.3.6.1.4.1.2435.2.4.3.1240.2.5 | DisplayString | read-only | protect password. |
| brport | 1.3.6.1.4.1.2435.2.4.3.1240.3 | |||
| INT brpsPortCount | 1.3.6.1.4.1.2435.2.4.3.1240.3.1 | INTEGER | read-only | Number of ports on this print server. |
| brpsPortInfoTable | 1.3.6.1.4.1.2435.2.4.3.1240.3.2 | not-accessible | This table represents the attributes of a port. | |
| brpsPortInfoEntry | 1.3.6.1.4.1.2435.2.4.3.1240.3.2.1 | not-accessible | A row in the port table. Rows cannot be created or deleted via direct SNMP operations. | |
| INT brpsPortIndex | 1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.1 | INTEGER | read-only | The port number. |
| STR brpsPortName | 1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.2 | DisplayString | read-write | The port name. |
| INT brpsPortType | 1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.3 | INTEGER | read-only | Type of port. |
| INT brpsPortStatus | 1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.4 | INTEGER | read-only | The port status as a 32 bit integer. |
| STR brpsPortStatusString | 1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.5 | DisplayString | read-only | The port status description. Reflects the printer's front panel display on internal print server interfaces. |
| INT brpsPortProtocol | 1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.6 | INTEGER | read-only | Protocol currently printing on this port. |
| INT brpsPortQueueSize | 1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.7 | INTEGER | read-only | Number of protocols waiting to print on this port. |
| STR brpsPortDescriptionString | 1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.8 | DisplayString | read-only | The port description. Reflects the device ID of the printer connected to the port. |
| STR brpsPortInfoString | 1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.9 | DisplayString | read-only | The port status information. More information about the port status. |
| INT brpsPortHTTPExtensions | 1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.10 | INTEGER | read-only | 0 indicates the printer on this port does not support HTTP, 1 indicates that the printer does support HTTP. |
| INT brpsPortSNMPExtensions | 1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.11 | INTEGER | read-only | 0 indicates the printer on this port does not support SNMP, 1 indicates that the printer does support SNMP. |
| STR brpsPortAttribute | 1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.12 | DisplayString | read-write | Port attribute. |
| INT brpsPortBinaryMode | 1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.13 | INTEGER | read-write | Port binary mode. |
| INT brpsPortInhibitDatagramSupport | 1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.14 | INTEGER | read-write | 0 indicates the inhibit datagram is not supported. 1 indicates the inhibit datagram is supported. |
| brservice | 1.3.6.1.4.1.2435.2.4.3.1240.4 | |||
| INT brpsServiceCount | 1.3.6.1.4.1.2435.2.4.3.1240.4.1 | INTEGER | read-only | Number of services on this print server. |
| brpsServiceInfoTable | 1.3.6.1.4.1.2435.2.4.3.1240.4.2 | not-accessible | This table represents the attributes of a service. | |
| brpsServiceInfoEntry | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1 | not-accessible | A row in the services table. Rows cannot be created or deleted via direct SNMP operations. | |
| INT brpsServiceIndex | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.1 | INTEGER | read-only | The service number. |
| STR brpsServiceName | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.2 | DisplayString | read-write | The service name. |
| INT brpsServicePort | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.3 | INTEGER | read-write | The port number assigned to this service. |
| INT brpsServiceFilter | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.4 | INTEGER | read-write | Filter number assigned to this service. |
| INT brpsServiceBOT | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.5 | INTEGER | read-write | Beginning of text string number assigned to this service. |
| INT brpsServiceEOT | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.6 | INTEGER | read-write | End of text string number assigned to this service. |
| INT brpsServiceMatch | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.7 | INTEGER | read-write | Match string number assigned to this service. |
| INT brpsServiceReplace | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.8 | INTEGER | read-write | Replace string number assigned to this service. |
| INT brpsServiceTCPPort | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.9 | INTEGER | read-write | TCP Port number assigned to this service. |
| STR brpsServiceNDSTree | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.10 | DisplayString | read-write | The NDS Tree. |
| OCT brpsServiceNDSContext | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.11 | OCTET STRING | read-write | The NDS Context in Unicode. |
| STR brpsServiceVines | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.12 | DisplayString | read-write | The Vines StreetTalk name for this service. |
| INT brpsServiceObsolete | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.13 | INTEGER | read-write | Obsolete parameter that is no longer used |
| INT brpsServiceNetwareServerCount | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.14 | INTEGER | read-write | The number of Netware servers enabled on this service. Modifying the value will truncate the server list to the specified number of servers. If the value set is greater than the number of servers currently on the list, then the list will be unchanged. |
| INT brpsServiceReceiveOnly | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.15 | INTEGER | read-write | When enabled, the service will only receive data, any printer responses will be discarded. |
| INT brpsServiceTCPQueued | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.16 | INTEGER | read-write | When enabled, the raw TCP connections to the port will be queued while waiting for the port to become available |
| INT brpsServiceProtocolLAT | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.17 | INTEGER | read-write | When enabled, the LAT protocol will be available on this service. |
| INT brpsServiceProtocolTCPIP | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.18 | INTEGER | read-write | When enabled, the TCP/IP protocol will be available on this service. |
| INT brpsServiceProtocolNetware | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.19 | INTEGER | read-write | When enabled, the Netware protocol will be available on this service. |
| INT brpsServiceProtocolAppleTalk | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.20 | INTEGER | read-write | When enabled, the AppleTalk protocol will be available on this service. |
| INT brpsServiceProtocolBanyan | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.21 | INTEGER | read-write | When enabled, the Banyan protocol will be available on this service. |
| INT brpsServiceProtocolDLC | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.22 | INTEGER | read-write | When enabled, the DLC protocol will be available on this service. |
| INT brpsServiceProtocolNetBEUI | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.23 | INTEGER | read-write | When enabled, the NetBEUI protocol will be available on this service. |
| INT brpsServiceNetwareServerMode | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.24 | INTEGER | read-write | Netware mode for this service. 0 = Queue Server, 1 = Remote Printer |
| INT brpsServiceNetwareRemotePrinterNum | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.25 | INTEGER | read-write | Remote Printer Number for this service |
| INT brpsServiceProtocolIPP | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.26 | INTEGER | read-write | When enabled, the IPP protocol will be available on this service. |
| STR brpsServiceAppleTalkType | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.27 | DisplayString | read-write | AppleTalk type. |
| INT brpsServiceStringLimit | 1.3.6.1.4.1.2435.2.4.3.1240.4.3 | INTEGER | read-only | Maximum number of service strings supported by the print server. |
| brpsServiceStringInfoTable | 1.3.6.1.4.1.2435.2.4.3.1240.4.4 | not-accessible | This table represents the service BOT/EOT/MATCH/REPLACE strings defined. | |
| brpsServiceStringInfoEntry | 1.3.6.1.4.1.2435.2.4.3.1240.4.4.1 | not-accessible | A row in the service string table. Rows cannot be created or deleted via direct SNMP operations. | |
| INT brpsServiceStringIndex | 1.3.6.1.4.1.2435.2.4.3.1240.4.4.1.1 | INTEGER | read-only | The string number. |
| STR brpsServiceString | 1.3.6.1.4.1.2435.2.4.3.1240.4.4.1.2 | DisplayString | read-write | The character string definition suitable for displaying. |
| INT brpsServiceStringCount | 1.3.6.1.4.1.2435.2.4.3.1240.4.5 | INTEGER | read-only | Number of service strings currently defined on the print server. |
| INT brpsServiceFilterCount | 1.3.6.1.4.1.2435.2.4.3.1240.4.6 | INTEGER | read-only | Number of service filters implemented by the device. |
| brprotocol | 1.3.6.1.4.1.2435.2.4.3.1240.5 | |||
| brlat | 1.3.6.1.4.1.2435.2.4.3.1240.5.1 | |||
| INT brpsLATSupported | 1.3.6.1.4.1.2435.2.4.3.1240.5.1.1 | INTEGER | read-only | 0 indicates the LAT protocol is not supported. 1 indicates LAT support is implemented by the firmware |
| INT brpsLATEnable | 1.3.6.1.4.1.2435.2.4.3.1240.5.1.2 | INTEGER | read-write | 0 indicates the LAT protocol is not enabled. 1 indicates that the LAT protocol is enabled. Writing a non-zero value will enable the LAT protocol if it is supported by the firmware. |
| INT brpsLATCircuitTimer | 1.3.6.1.4.1.2435.2.4.3.1240.5.1.3 | INTEGER | read-write | Minimum time (in milliseconds) between transmissions to the host. The default of 10 normally provides the best performance. |
| INT brpsLATKeepAliveTimer | 1.3.6.1.4.1.2435.2.4.3.1240.5.1.4 | INTEGER | read-write | How often in seconds a packet is transmitted to keep a connection alive. |
| INT brpsLATReceiveBufferMax | 1.3.6.1.4.1.2435.2.4.3.1240.5.1.5 | INTEGER | read-write | LAT receive buffer max size. |
| INT brpsLATTransmitBufferMax | 1.3.6.1.4.1.2435.2.4.3.1240.5.1.6 | INTEGER | read-write | LAT transmit buffer max size. |
| INT brpsLATTimeout | 1.3.6.1.4.1.2435.2.4.3.1240.5.1.7 | INTEGER | read-write | LAT inactivity timeout (sec). |
| STR brpsLATGroup | 1.3.6.1.4.1.2435.2.4.3.1240.5.1.8 | DisplayString | read-write | LAT group membership (mm-[nn]). |
| brtcpip | 1.3.6.1.4.1.2435.2.4.3.1240.5.2 | |||
| INT brpsTCPIPSupported | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.1 | INTEGER | read-only | 0 indicates the TCP/IP protocol is not supported. 1 indicates TCP/IP support is implemented by the firmware |
| INT brpsTCPIPEnable | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.2 | INTEGER | read-write | 0 indicates the TCP/IP protocol is not enabled. 1 indicates that the TCP/IP protocol is enabled. Writing a non-zero value will enable the TCP/IP protocol if it is supported by the firmware. |
| IP brpsTCPIPAddress | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.3 | IpAddress | read-write | IP Address assigned to the print server. |
| IP brpsTCPIPSubnetMask | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.4 | IpAddress | read-write | Subnet mask assigned to the print server. |
| IP brpsTCPIPGateway | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.5 | IpAddress | read-write | Gateway/Router address assigned to the print server. |
| INT brpsTCPIPMethod | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.6 | INTEGER | read-write | Method used to determine the IP Address. AUTO tries all protocols. STATIC uses the configured address. DHCP, BOOTP, and RARP use only that protocol. |
| INT brpsTCPIPTimeout | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.7 | INTEGER | read-write | Timeout used for LPD connections. |
| INT brpsTCPIPBootTries | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.8 | INTEGER | read-write | Number of attempts to use BOOTP, RARP, and DHCP. |
| INT brpsTCPIPMaxWindow | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.9 | INTEGER | read-write | Maximum window size for TCP connections. Due to resource limitations setting the window to values greater than 10240 is not recommended. |
| INT brpsTCPIPRARPNoSubnet | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.10 | INTEGER | read-write | If enabled, do not set the subnet mask based on the RARP response. |
| INT brpsTCPIPRARPNoGateway | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.11 | INTEGER | read-write | If enabled, do not set the gateway/router address based on the RARP response. |
| OCT brpsTCPIPUpdate | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.12 | OCTET STRING | read-write | Hardware MAC address to be updated. This value is write only. Will read back as zeros. |
| INT brpsTCPIPBanner | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.13 | INTEGER | read-write | 0 indicates the LPR banner print is not enabled. 1 indicates that the LPR banner print is enabled. |
| INT brpsTCPIPFastTimeoutEnable | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.14 | INTEGER | read-write | 0 indicates the fast timeout is not enabled. 1 indicates that the fast timeout is enabled. |
| INT brpsTCPIPLPRRetryEnable | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.15 | INTEGER | read-write | 0 indicates the LPR print retry is not enabled. 1 indicates that the LPR print retry is enabled. |
| INT brpsTCPIPUseMethod | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.16 | INTEGER | read-write | Method type that used set up TCP/IP configuration. |
| IP brpsTCPIPMethodServer | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.17 | IpAddress | read-write | If TCP/IP configuration is setted up by any protocol server, this entry indicates the IP address of the server. |
| brpsTCPIPAccessTable | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.18 | not-accessible | This table represents the list of IP address of node that has parmittion for access.Up to 16 Netware addresses can be enabled. | |
| brpsTCPIPAccessEntry | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.18.1 | not-accessible | A row in the TCP/IP access table. Rows cannot be created or deleted via direct SNMP operations. | |
| INT brpsTCPIPAccessIndex | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.18.1.1 | INTEGER | read-only | The TCP/IP access table's index. |
| IP brpsTCPIPAccessNodeAddress | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.18.1.2 | IpAddress | read-write | IP address of node that has parmittion for access. |
| IP brpsTCPIPAccessSubnetMask | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.18.1.3 | IpAddress | read-write | Subnet mask of node that has parmittion for access. |
| INT brpsAdvancedTCPIPAccessSupported | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.19 | INTEGER | read-only | 0 indicates the Advanced TCP/IP Access is not supported. 1 indicates Advanced TCP/IP Access support is implemented by the firmware |
| INT brpsAdvancedTCPIPAccessEnable | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.20 | INTEGER | read-write | 0 indicates the Advanced TCP/IP Access is not enabled. 1 indicates that the Advanced TCP/IP Access is enabled. |
| IP brpsAdvancedTCPIPAccessAdministratorIPAddress | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.21 | IpAddress | read-write | Administrator IPAddress. |
| INT brpsAdvancedTCPIPAccessSetting | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.22 | INTEGER | read-write | 0 indicates the Advanced TCP/IP Access is reject. 1 indicates that the Advanced TCP/IP Access is Accept. |
| brnetware | 1.3.6.1.4.1.2435.2.4.3.1240.5.3 | |||
| INT brpsNetwareSupported | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.1 | INTEGER | read-only | 0 indicates the Netware protocol is not supported. 1 indicates Netware support is implemented by the firmware. 2 indicates that Netware NEST NDS support is implemented by the firmware. |
| INT brpsNetwareEnable | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.2 | INTEGER | read-write | 0 indicates the Netware protocol is not enabled. 1 indicates that the Netware protocol is enabled. Writing a non-zero value will enable the Netware protocol if it is supported by the firmware. |
| INT brpsNetwareFrameType | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.3 | INTEGER | read-write | The frame type to be used as follows: 0 = Automatic, 1 = Ethernet 802.3, 2 = Ethernet II, 3 = Ethernet 802.2, 4 = Ethernet SNAP. |
| INT brpsNetwarePollFreq | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.4 | INTEGER | read-write | File server polling frequency in seconds. |
| INT brpsNetwareAdvFreq | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.5 | INTEGER | read-write | Print server advertising frequency in seconds. |
| STR brpsNetwarePassword | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.6 | DisplayString | read-write | The Netware login password. |
| INT brpsNetwareRestart | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.7 | INTEGER | read-write | Setting any value will restart the Netware protocol. |
| brpsNetwareServerTable | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.8 | not-accessible | This table represents the list of enabled Netware servers. Up to 16 Netware servers can be enabled. If the service is configured for remote printer mode, then only the first enabled server is used and it should specify a print server. | |
| brpsNetwareServerEntry | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.8.1 | not-accessible | A row in the Netware server table. Rows cannot be created or deleted via direct SNMP operations. | |
| INT brpsNetwareServerIndex | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.8.1.1 | INTEGER | read-only | The Netware server number. |
| STR brpsNetwareServerName | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.8.1.2 | DisplayString | read-write | The Netware server name. Specifies a print server if the service is in remote printer mode, or a file server if the service is in queue server mode |
| INT brpsNetwarePasswordSet | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.9 | INTEGER | read-only | Returns 1 if the Netware login password is set, 0 if not set. |
| INT brpsNDSSupported | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.10 | INTEGER | read-only | 0 indicates NDS is not supported. 1 indicates NDS is implemented by the firmware |
| STR brpsNetwareEtherIINetInfo | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.11 | DisplayString | read-only | Ethernet II network information. |
| INT brpsNetwareEtherIICount | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.12 | INTEGER | read-only | Ethernet II network counter |
| STR brpsNetware8022NetInfo | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.13 | DisplayString | read-only | IEEE 802.2 network information. |
| INT brpsNetware8022Count | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.14 | INTEGER | read-only | IEEE 802.2 network counter. |
| STR brpsNetware8023NetInfo | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.15 | DisplayString | read-only | IEEE 802.3 network information. |
| INT brpsNetware8023Count | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.16 | INTEGER | read-only | IEEE 802.3 network information. |
| STR brpsNetwareSNAPNetInfo | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.17 | DisplayString | read-only | SNAP network information. |
| INT brpsNetwareSNAPCount | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.18 | INTEGER | read-only | SNAP network count. |
| STR brpsNetwareServicingServerName | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.19 | DisplayString | read-only | Netware server name. |
| STR brpsNetwareServicingQueueName | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.20 | DisplayString | read-only | Netware queue name. |
| INT brpsNetwareServicingServerCount | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.21 | INTEGER | read-only | Number of netware servers. |
| INT brpsNetwareServicingQueueCount | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.22 | INTEGER | read-only | Number of netware queues. |
| INT brpsNetwarePrintJob | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.23 | INTEGER | read-only | Number of netware print job. |
| brappletalk | 1.3.6.1.4.1.2435.2.4.3.1240.5.4 | |||
| INT brpsAppleTalkSupported | 1.3.6.1.4.1.2435.2.4.3.1240.5.4.1 | INTEGER | read-only | 0 indicates the AppleTalk protocol is not supported. 1 indicates AppleTalk support is implemented by the firmware |
| INT brpsAppleTalkEnable | 1.3.6.1.4.1.2435.2.4.3.1240.5.4.2 | INTEGER | read-write | 0 indicates the AppleTalk protocol is not enabled. 1 indicates that the AppleTalk protocol is enabled. Writing a non-zero value will enable the AppleTalk protocol if it is supported by the firmware. |
| STR brpsAppleTalkZone | 1.3.6.1.4.1.2435.2.4.3.1240.5.4.3 | DisplayString | read-write | The AppleTalk zone the print server belongs to. |
| INT brpsAppleTalkPrintJob | 1.3.6.1.4.1.2435.2.4.3.1240.5.4.4 | INTEGER | read-only | Counter of AppleTalk print job. |
| INT brpsAppleTalkReadByte | 1.3.6.1.4.1.2435.2.4.3.1240.5.4.5 | INTEGER | read-only | Counter of read bytes. |
| INT brpsAppleTalkWriteByte | 1.3.6.1.4.1.2435.2.4.3.1240.5.4.6 | INTEGER | read-only | Counter of write bytes. |
| INT brpsAppleTalkReadError | 1.3.6.1.4.1.2435.2.4.3.1240.5.4.7 | INTEGER | read-only | Counter of read error. |
| INT brpsAppleTalkWriteError | 1.3.6.1.4.1.2435.2.4.3.1240.5.4.8 | INTEGER | read-only | Counter of write error. |
| brbanyan | 1.3.6.1.4.1.2435.2.4.3.1240.5.5 | |||
| INT brpsBanyanSupported | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.1 | INTEGER | read-only | 0 indicates the Banyan protocol is not supported. 1 indicates Banyan support is implemented by the firmware |
| INT brpsBanyanEnable | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.2 | INTEGER | read-write | 0 indicates the Banyan protocol is not enabled. 1 indicates that the Banyan protocol is enabled. Writing a non-zero value will enable the Banyan protocol if is is supported by the firmware. |
| STR brpsBanyanLoginName | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.3 | DisplayString | read-write | The Banyan login name. |
| STR brpsBanyanPassword | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.4 | DisplayString | read-write | The Banyan login password. |
| INT brpsBanyanHopCount | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.5 | INTEGER | read-write | Number of hops between the print server and the Banyan file server. |
| INT brpsBanyanTimeout | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.6 | INTEGER | read-write | Timeout in seconds for a Banyan print job. |
| INT brpsBanyanPasswordSet | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.7 | INTEGER | read-only | Returns 1 if the Banyan login password is set, 0 if not set. |
| OCT brpsBanyanIPNetworkID1 | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.8 | OCTET STRING | read-only | IP Network ID. |
| OCT brpsBanyanIPNetworkID2 | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.9 | OCTET STRING | read-only | IP Network ID. |
| OCT brpsBanyanRouter1 | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.10 | OCTET STRING | read-only | Router ID. |
| OCT brpsBanyanRouter2 | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.11 | OCTET STRING | read-only | Router ID. |
| INT brpsBanyanIPPacket | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.12 | INTEGER | read-only | Counter of IP Packet. |
| INT brpsBanyanErrorCS | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.13 | INTEGER | read-only | Counter of CS error. |
| INT brpsBanyanErrorPT | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.14 | INTEGER | read-only | Counter of PT error. |
| INT brpsBanyanErrorLE | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.15 | INTEGER | read-only | Counter of LE error. |
| STR brpsBanyanPrintServerStatus | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.16 | DisplayString | read-only | Banyan print server status. |
| OCT brpsBanyanServerAddress1 | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.17 | OCTET STRING | read-only | Banyan server address. |
| OCT brpsBanyanServerAddress2 | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.18 | OCTET STRING | read-only | Banyan server address. |
| STR brpsBanyanIPCConnectionInformation | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.19 | DisplayString | read-only | IPC connection information. |
| INT brpsBanyanIPCSequenceError | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.20 | INTEGER | read-only | IPC sequence error. |
| STR brpsBanyanIPCListen | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.21 | DisplayString | read-only | IPC listen. |
| STR brpsBanyanSPPConnectionInformation | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.22 | DisplayString | read-only | SPP connection information. |
| INT brpsBanyanSPPSequenceError | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.23 | INTEGER | read-only | SPP sequence error. |
| STR brpsBanyanSPPListen | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.24 | DisplayString | read-only | SPP listen. |
| bremail | 1.3.6.1.4.1.2435.2.4.3.1240.5.6 | |||
| INT brpsEmailSupported | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.1 | INTEGER | read-only | 0 indicates the POP3/SMTP email protocols are not supported. 1 indicates email support is implemented by the firmware |
| INT brpsEmailEnable | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.2 | INTEGER | read-write | 0 indicates the POP3/SMTP email protocols are not enabled. 1 indicates that the email protocols are enabled. Writing a non-zero value will enable the email protocols if they are supported by the firmware. |
| IP brpsPOP3Address | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.3 | IpAddress | read-write | The IP Address of the POP3 server. |
| IP brpsSMTPAddress | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.4 | IpAddress | read-write | The IP Address of the SMTP server. |
| STR brpsPOP3Name | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.5 | DisplayString | read-write | The POP3 mailbox name. |
| STR brpsPOP3Password | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.6 | DisplayString | read-write | The POP3 mailbox password. |
| INT brpsPOP3PollFreq | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.7 | INTEGER | read-write | The POP3 polling frequency in seconds. |
| INT brpsPOP3Timeout | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.8 | INTEGER | read-write | The POP3 timeout in minutes. |
| INT brpsPOP3PasswordSet | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.9 | INTEGER | read-only | Returns 1 if the POP3 password is set, 0 if not set. |
| INT brpsPOP3TotalMessage | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.10 | INTEGER | read-only | Counter of POP3 message. |
| INT brpsPOP3TotalConnect | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.11 | INTEGER | read-only | Counter of POP3 connect. |
| INT brpsPOP3TotalConnectFailure | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.12 | INTEGER | read-only | Counter of POP3 connect error. |
| INT brpsPOP3TotalConnectionLost | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.13 | INTEGER | read-only | Counter of POP3 connection lost. |
| INT brpsPOP3TotalUserFailure | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.14 | INTEGER | read-only | Counter of POP3 user error. |
| INT brpsPOP3TotalPasswordFailure | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.15 | INTEGER | read-only | Counter of POP3 pass error. |
| INT brpsPOP3TotalIOError | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.16 | INTEGER | read-only | Counter of POP3 I/O error. |
| INT brpsSMTPTotalMessage | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.17 | INTEGER | read-only | Counter of SMTP message. |
| INT brpsSMTPTotalConnect | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.18 | INTEGER | read-only | Counter of SMTP connect. |
| INT brpsSMTPTotalConnectFailure | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.19 | INTEGER | read-only | Counter of SMTP connect error. |
| INT brpsSMTPTotalRecvFromFailure | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.20 | INTEGER | read-only | Counter of SMTP recvfrom error. |
| INT brpsSMTPTotalSendToFailure | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.21 | INTEGER | read-only | Counter of SMTP recvfrom error. |
| INT brpsPOP3Supported | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.101 | INTEGER | read-only | 0 indicates the POP3 protocol is not supported. 1 indicates the POP3 protocol is implemented by the firmware |
| INT brpsSMTPServerAuthMethod | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.102 | INTEGER | read-write | 0 indicates the user is not authenticated to the SMTP Server. 1 indicates the user is authenticated to the SMTP Server using SMTP-AUTH. 2 indicates the user is authenticated to the SMTP Server using POP before SMTP. |
| OCT brpsSMTPAUTHUsername | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.103 | OCTET STRING | read-write | The username of SMTP server's account. |
| OCT brpsSMTPAUTHPassword | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.104 | OCTET STRING | read-write | The password of SMTP server's account. |
| INT brpsSMTPAUTHPasswordSet | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.105 | INTEGER | read-only | Returns 1 if the SMTP server login password is set, 0 if not set. |
| INT brpsSmtpAUTHTimeout | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.106 | INTEGER | read-write | The SMTP-AUTH timeout in seconds. |
| INT brpsPOPbeforeSMTPWait | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.107 | INTEGER | read-write | The wait time in mili seconds between POP logging in and SMTP sending. |
| INT brpsAPOPEnable | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.108 | INTEGER | read-write | 0 indicates the APOP is not enabled. 1 indicates the APOP is enabled. |
| INT brpsSMTPEnhancedAuthSupported | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.150 | INTEGER | read-only | Bit0 indicates 'no authentication'. Bit1 indicates 'SMTP-AUTH'. Bit2 indicates 'POP before SMTP'. |
| INT brpsAPOPSupported | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.151 | INTEGER | read-only | 0 indicates the APOP is not supported. 1 indicates the APOP is supported. |
| INT brpsEmailSendTestSupported | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.152 | INTEGER | read-only | 0 indicates the Email Sending Test is not supported. 1 indicates the Email Sending Test is supported. |
| INT brpsEmailRecvTestSupported | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.153 | INTEGER | read-only | 0 indicates the Email Receiving Test is not supported. 1 indicates the Email Receiving Test is supported. |
| INT brpsChangeSMTPPortSupported | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.154 | INTEGER | read-only | 0 indicates to change the SMTP port number is not supported. 1 indicates to change the SMTP port number is supported. |
| INT brpsSMTPPortNumber | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.155 | INTEGER | read-write | The port number of connection to SMTP server. |
| INT brpsChangePOP3PortSupported | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.156 | INTEGER | read-only | 0 indicates to change the POP3 port number is not supported. 1 indicates to change the POP3 port number is supported. |
| INT brpsPOP3PortNumber | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.157 | INTEGER | read-write | The port number of connection to POP3 server. |
| OCT brpsTmpSMTPServerName | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.170 | OCTET STRING | read-write | Temporary Setting for Email Sending Test. The FQDN name of the SMTP server. |
| INT brpsTmpSMTPServerAuthMethod | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.171 | INTEGER | read-write | Temporary Setting for Email Sending Test. 0 indicates the user is not authenticated to the SMTP Server. 1 indicates the user is authenticated to the SMTP Server using SMTP-AUTH. 2 indicates the user is authenticated to the SMTP Server using POP before SMTP. |
| OCT brpsTmpSMTPAUTHUsername | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.172 | OCTET STRING | read-write | Temporary Setting for Email Sending Test. The username of SMTP server's account. |
| OCT brpsTmpSMTPAUTHPassword | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.173 | OCTET STRING | read-write | Temporary Setting for Email Sending Test. The password of SMTP server's account. |
| OCT brpsTmpPOP3ServerName | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.174 | OCTET STRING | read-write | Temporary Setting for Email Sending/Receiving Test. The FQDN name of the POP3 server. |
| STR brpsTmpPOP3Name | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.175 | DisplayString | read-write | Temporary Setting for Email Sending/Receiving Test. The POP3 mailbox name. |
| STR brpsTmpPOP3Password | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.176 | DisplayString | read-write | Temporary Setting for Email Sending/Receiving Test. The POP3 mailbox password. |
| OCT brpsTmpPrintersEmailaddress | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.177 | OCTET STRING | read-write | Temporary Setting for Email Sending Test. The Printers Email Address |
| INT brpsTmpAPOPEnable | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.178 | INTEGER | read-write | Temporary Setting for Email Sending/Receiving Test. 0 indicates the APOP is not enabled. 1 indicates the APOP is enabled. |
| INT brpsTmpSMTPAUTHPasswordModified | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.179 | INTEGER | read-write | 0 indicates the SMTP server password is not modified. 1 indicates the SMTP server password is modified. |
| INT brpsTmpPOP3PasswordModified | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.180 | INTEGER | read-write | 0 indicates the POP3 server password is not modified. 1 indicates the POP3 server password is modified. |
| INT brpsTmpSMTPPortNumber | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.181 | INTEGER | read-write | Temporary Setting for Email Sending Test. The port number of connection to SMTP server. |
| INT brpsTmpPOP3PortNumber | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.182 | INTEGER | read-write | Temporary Setting for Email Sending/Receiving Test. The port number of connection to POP3 server. |
| INT brpsEmailSendTestMail | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.200 | INTEGER | read-write | 0 indicates the testmail is not sended at Email Sending Test. 1 indicates the testmail is sended at Email Sending Test. |
| STR brpsEmailTestDestinationAddress | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.201 | DisplayString | read-write | The destination Email Address of Email Sending Test. |
| INT brpsEmailSendTestCall | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.210 | INTEGER | read-write | 0 indicates the Email Sending Test is not called on. ('READY') 1 indicates the Email Sending Test is called on. ('START') 2 indicates the Email Sending Test is canceled. ('CANCEL') |
| INT brpsEmailRecvTestCall | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.211 | INTEGER | read-write | 0 indicates the Email Receiving Test is not called on. ('READY') 1 indicates the Email Receiving Test is called. ('START') 2 indicates the Email Receiving Test is canceled. ('CANCEL') |
| INT brpsEmailSendRecvTestCall | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.212 | INTEGER | read-write | 0 indicates the Email Sending and Receiving Test is not called on. ('READY') 1 indicates the Email Sending and Receiving Test is called. ('START') 2 indicates the Email Sending and Receiving Test is canceled. ('CANCEL') |
| INT brpsEmailTestResult | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.220 | INTEGER | read-write | This Value is divided into 15-8bit and 7-0bit. 15-8bit indicates Email Sending Test's Result. 7-0bit indicates Email Receiving Test's Result. (However, the value from 0x00 to 0x04 is only set to 7-0bit.) 0x00 indicates the Email Test is not running. 0x01 indicates the Email Test is running. ('BUSY') 0x02 indicates the Email Test is canceled.('CANCELED') 0x03 indicates the Email Test is Locked by another Email Test process.(LOCKED) 0x04 indicates the Email Test is not executed. -- unused 0x10 indicates the Status 'Fatal Error is occurred during Email Testing'. 0x20 indicates the Status 'Invalid value is set in SMTP Server Address'. 0x21 indicates the Status 'Invalid value is set in SMTP-AUTH Account Name'. 0x22 indicates the Status 'Invalid value is set in SMTP-AUTH Password'. 0x30 indicates the Status 'Invalid value is set in POP3 Server Address'. 0x31 indicates the Status 'Invalid value is set in POP3 Account Name'. 0x32 indicates the Status 'Invalid value is set in POP3 Account Password'. 0x40 indicates the Status 'Invalid value is set in POP3 Printer E-mail Address'. 0x41 indicates the Status 'Invalid value is set in Destination E-mail Address'. 0x50 indicates the Status 'Sending OK'. 0x51 indicates the Status 'Cannot locate SMTP server'. 0x52 indicates the Status 'Cannot connect to SMTP server'. 0x53 indicates the Status 'Cannot authenticate with SMTP server by using method'. 0x54 indicates the Status 'Authentication failure in SMTP server'. 0x55 indicates the Status 'Email Sending Timeout' -- unused 0x60 indicates the Status 'Receiving OK'. 0x61 indicates the Status 'Cannot locate POP3 server'. 0x62 indicates the Status 'Cannot connect to POP3 server'. 0x63 indicates the Status 'Authentication failure in POP3 server'. 0x64 indicates the Status 'Cannot authenticate with POP3 server by using method'. 0x65 indicates the Status 'Email Receiving Timeout' -- unused 0x66 indicates the Email Test is Locked by another Email process. 0x70 indicates the Status 'Cannot resolve the host name (DNS Error)'. |
| INT brpsPOP3TotalAPOPFailure | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.221 | INTEGER | read-only | Counter of POP3 APOP error. |
| brdlc | 1.3.6.1.4.1.2435.2.4.3.1240.5.7 | |||
| INT brpsDLCSupported | 1.3.6.1.4.1.2435.2.4.3.1240.5.7.1 | INTEGER | read-only | 0 indicates the DLC protocol is not supported. 1 indicates DLC support is implemented by the firmware |
| INT brpsDLCEnable | 1.3.6.1.4.1.2435.2.4.3.1240.5.7.2 | INTEGER | read-write | 0 indicates the DLC protocol is not enabled. 1 indicates that the DLC protocol is enabled. Writing a non-zero value will enable the DLC protocol if is is supported by the firmware. |
| STR brpsDLCPrintStatus | 1.3.6.1.4.1.2435.2.4.3.1240.5.7.3 | DisplayString | read-only | DLC print status. |
| INT brpsDLCLLCState | 1.3.6.1.4.1.2435.2.4.3.1240.5.7.4 | INTEGER | read-only | LLC status. |
| STR brpsDLCLLCConnectHost | 1.3.6.1.4.1.2435.2.4.3.1240.5.7.5 | DisplayString | read-only | LLC connected host name. |
| INT brpsDLCLLCLastIFrame | 1.3.6.1.4.1.2435.2.4.3.1240.5.7.6 | INTEGER | read-only | LLC last valid I-frame. |
| INT brpsDLCLLCRecvPacket | 1.3.6.1.4.1.2435.2.4.3.1240.5.7.7 | INTEGER | read-only | Counter of LLC receive packets. |
| STR brpsDLCLLCPortStatus | 1.3.6.1.4.1.2435.2.4.3.1240.5.7.8 | DisplayString | read-only | Port status. |
| brnetbeui | 1.3.6.1.4.1.2435.2.4.3.1240.5.8 | |||
| INT brpsNetBEUISupported | 1.3.6.1.4.1.2435.2.4.3.1240.5.8.1 | INTEGER | read-only | 0 indicates the NetBEUI protocol is not supported. 1 indicates NetBEUI support is implemented by the firmware |
| INT brpsNetBEUIEnable | 1.3.6.1.4.1.2435.2.4.3.1240.5.8.2 | INTEGER | read-write | 0 indicates the NetBEUI protocol is not enabled. 1 indicates that the NetBEUI protocol is enabled. Writing a non-zero value will enable the NetBEUI protocol if is is supported by the firmware. |
| STR brpsNetBEUIDomain | 1.3.6.1.4.1.2435.2.4.3.1240.5.8.3 | DisplayString | read-write | The NetBEUI domain name. |
| INT brpsNetBIOSIPSupported | 1.3.6.1.4.1.2435.2.4.3.1240.5.8.4 | INTEGER | read-only | 0 indicates the NetBIOS IP protocol is not supported. 1 indicates NetBIOS IP support is implemented by the firmware |
| INT brpsNetBIOSIPEnable | 1.3.6.1.4.1.2435.2.4.3.1240.5.8.5 | INTEGER | read-write | 0 indicates the NetBIOS IP protocol is not enabled. 1 indicates that the NetBIOS IP protocol is enabled. Writing a non-zero value will enable the NetBIOS IP protocol if is is supported by the firmware. |
| INT brpsNetBIOSIPMethod | 1.3.6.1.4.1.2435.2.4.3.1240.5.8.6 | INTEGER | read-write | Method used to determine the IP Address of the WINS server. AUTO tries all protocols (currently only DHCP is tried). STATIC uses the configured address. |
| IP brpsNetBIOSPrimaryWINSAddr | 1.3.6.1.4.1.2435.2.4.3.1240.5.8.7 | IpAddress | read-write | The IP Address of the primary WINS server. |
| IP brpsNetBIOSSecondaryWINSAddr | 1.3.6.1.4.1.2435.2.4.3.1240.5.8.8 | IpAddress | read-write | The IP Address of the secondary WINS server. |
| INT brpsNetBIOSPrintingSupported | 1.3.6.1.4.1.2435.2.4.3.1240.5.8.101 | INTEGER | read-only | 0 indicates the NetBIOS IP protocol printing is not supported. 1 indicates the NetBIOS IP protocol printing is supported. |
| bripp | 1.3.6.1.4.1.2435.2.4.3.1240.5.9 | |||
| INT brpsIPPSupported | 1.3.6.1.4.1.2435.2.4.3.1240.5.9.1 | INTEGER | read-only | 0 indicates the IPP protocol is not supported. 1 indicates IPP support is implemented by the firmware |
| INT brpsIPPEnable | 1.3.6.1.4.1.2435.2.4.3.1240.5.9.2 | INTEGER | read-write | 0 indicates the IPP protocol is not enabled. 1 indicates that the IPP protocol is enabled. Writing a non-zero value will enable the IPP protocol if it is supported by the firmware. |
| INT brIPPRegularPortEnable | 1.3.6.1.4.1.2435.2.4.3.1240.5.9.3 | INTEGER | read-write | 0 indicates that the IPP regular port is not enabled. 1 indicates that the IPP regular port is enabled. |
| INT brIPPSSLPortEnable | 1.3.6.1.4.1.2435.2.4.3.1240.5.9.4 | INTEGER | read-write | 0 indicates that the IPP SSL port is not enabled. 1 indicates that the IPP SSL port is enabled. |
| INT brIPPOriginalPortEnable | 1.3.6.1.4.1.2435.2.4.3.1240.5.9.5 | INTEGER | read-write | 0 indicates that the IPP original port is not enableed. 1 indicates that the IPP original port is enabled. |
| brntsend | 1.3.6.1.4.1.2435.2.4.3.1240.5.10 | |||
| INT brpsNtSendSupported | 1.3.6.1.4.1.2435.2.4.3.1240.5.10.1 | INTEGER | read-only | 0 indicates the NtSend protocol is not supported. 1 indicates NtSend support is implemented by the firmware |
| INT brpsNtSendEnable | 1.3.6.1.4.1.2435.2.4.3.1240.5.10.2 | INTEGER | read-write | 0 indicates the NtSend protocol is not enabled. 1 indicates that the NtSend protocol is enabled. Writing a non-zero value will enable the NtSend protocol if it is supported by the firmware. |
| brfirmware | 1.3.6.1.4.1.2435.2.4.3.1240.6 | |||
| IP brpsFirmwareIPAddress | 1.3.6.1.4.1.2435.2.4.3.1240.6.1 | IpAddress | read-write | The IP address of the host from which to TFTP GET the firmware. |
| STR brpsFirmwareHost | 1.3.6.1.4.1.2435.2.4.3.1240.6.2 | DisplayString | read-write | The Netware server name from which to fetch the firmware. |
| STR brpsFirmwareFile | 1.3.6.1.4.1.2435.2.4.3.1240.6.3 | DisplayString | read-write | The firmware file to be reloaded. |
| INT brpsFirmwareReload | 1.3.6.1.4.1.2435.2.4.3.1240.6.4 | INTEGER | read-write | Setting a value of 0x5A will cause the print server to begin attempts to reload the firmware within 5 seconds. Further attempts to read or modify the configuration are not recommended until after the firmware has been reloaded. |
| STR brpsFirmwareDescription | 1.3.6.1.4.1.2435.2.4.3.1240.6.5 | DisplayString | read-only | Firmware version and date. |
| INT brpsFirmwareXModem | 1.3.6.1.4.1.2435.2.4.3.1240.6.6 | INTEGER | read-write | Set 1 execute XMODEM mode. |
| INT brpsFirmwareAdvancedAddressSupported | 1.3.6.1.4.1.2435.2.4.3.1240.6.7 | INTEGER | read-only | 0 indicates the Firmware Advanced Address is not supported. 1 indicates Firmware Advanced Address support is implemented by the firmware |
| STR brpsFirmwareAdvancedAddress | 1.3.6.1.4.1.2435.2.4.3.1240.6.8 | DisplayString | read-write | The address of the host from which to TFTP GET the firmware. |
| brnetConfigOpt | 1.3.6.1.4.1.2435.2.4.3.2435 | |||
| broriginalprotocol | 1.3.6.1.4.1.2435.2.4.3.2435.5 | |||
| broriginaltcpip | 1.3.6.1.4.1.2435.2.4.3.2435.5.2 | |||
| INT brLPDType | 1.3.6.1.4.1.2435.2.4.3.2435.5.2.1 | INTEGER | read-write | |
| broriginalftp | 1.3.6.1.4.1.2435.2.4.3.2435.5.10 | |||
| INT brFTPSupported | 1.3.6.1.4.1.2435.2.4.3.2435.5.10.1 | INTEGER | read-only | 0 indicates the FTP protocol is not supported. 1 indicates FTP support is implemented by the firmware |
| INT brFTPEnable | 1.3.6.1.4.1.2435.2.4.3.2435.5.10.2 | INTEGER | read-write | 0 indicates the FTP protocol is not enabled. 1 indicates that the FTP protocol is enabled. Writing a non-zero value will enable the FTP protocol if it is supported by the firmware. |
| broriginalupnp | 1.3.6.1.4.1.2435.2.4.3.2435.5.11 | |||
| INT brUPnPSupported | 1.3.6.1.4.1.2435.2.4.3.2435.5.11.1 | INTEGER | read-only | 0 indicates the UPnP protocol is not supported. 1 indicates UPnP support is implemented by the firmware |
| INT brUPnPEnable | 1.3.6.1.4.1.2435.2.4.3.2435.5.11.2 | INTEGER | read-write | 0 indicates the UPnP protocol is not enabled. 1 indicates that the UPnP protocol is enabled. Writing a non-zero value will enable the UPnP protocol if it is supported by the firmware. |
| broriginalapipa | 1.3.6.1.4.1.2435.2.4.3.2435.5.12 | |||
| INT brAPIPASupported | 1.3.6.1.4.1.2435.2.4.3.2435.5.12.1 | INTEGER | read-only | 0 indicates the APIPA protocol is not supported. 1 indicates APIPA support is implemented by the firmware |
| INT brAPIPAEnable | 1.3.6.1.4.1.2435.2.4.3.2435.5.12.2 | INTEGER | read-write | 0 indicates the APIPA protocol is not enabled. 1 indicates that the APIPA protocol is enabled. Writing a non-zero value will enable the APIPA protocol if it is supported by the firmware. |
| broriginalmdns | 1.3.6.1.4.1.2435.2.4.3.2435.5.13 | |||
| INT brmDNSSupported | 1.3.6.1.4.1.2435.2.4.3.2435.5.13.1 | INTEGER | read-only | 0 indicates the mDNS protocol is not supported. 1 indicates mDNS support is implemented by the firmware |
| INT brmDNSEnable | 1.3.6.1.4.1.2435.2.4.3.2435.5.13.2 | INTEGER | read-write | 0 indicates the mDNS protocol is not enabled. 1 indicates that the mDNS protocol is enabled. Writing a non-zero value will enable the mDNS protocol if it is supported by the firmware. |
| STR brmDNSPrinterName | 1.3.6.1.4.1.2435.2.4.3.2435.5.13.3 | DisplayString | read-write | mDNS Service Name |
| broriginalLAA | 1.3.6.1.4.1.2435.2.4.3.2435.5.14 | |||
| INT brLAASupported | 1.3.6.1.4.1.2435.2.4.3.2435.5.14.1 | INTEGER | read-only | This value indicate if the locally administered addressing is supported. 0: Not Supported 1: Supported |
| OCT brLAAMacAddress | 1.3.6.1.4.1.2435.2.4.3.2435.5.14.2 | OCTET STRING | read-write | A locally administered address (LAA) that replaces the factory-assigned MAC address (UAA: universally administered address). If this setting is all-zero address (i.e. 6 bytes of zeros), the factory-assigned MAC address is used as the MAC address of the device. The LAA address must start with X2, X6, XA, or XE, where X is any hexadecimal digit 0 to F. |
| broriginalIPv6 | 1.3.6.1.4.1.2435.2.4.3.2435.5.15 | |||
| INT brIPv6Supported | 1.3.6.1.4.1.2435.2.4.3.2435.5.15.1 | INTEGER | read-only | 0 indicates the IPv6 protocol is not supported. 1 indicates IPv6 support is implemented by the firmware |
| INT brIPv6Enable | 1.3.6.1.4.1.2435.2.4.3.2435.5.15.2 | INTEGER | read-write | 0 indicates the IPv6 protocol is not enabled. 1 indicates that the IPv6 protocol is enabled. Writing a non-zero value will enable the IPv6 protocol if it is supported by the firmware. |
| INT brIPv6Priority | 1.3.6.1.4.1.2435.2.4.3.2435.5.15.3 | INTEGER | read-write | 0 indicates the IPv6 protocol is low priority. 1 indicates that the IPv6 protocol is high priority. |
| broriginaltelnet | 1.3.6.1.4.1.2435.2.4.3.2435.5.16 | |||
| INT brtelnetSupported | 1.3.6.1.4.1.2435.2.4.3.2435.5.16.1 | INTEGER | read-only | 0 indicates the telnet protocol is not supported. 1 indicates telnet support is implemented by the firmware |
| INT brtelnetEnable | 1.3.6.1.4.1.2435.2.4.3.2435.5.16.2 | INTEGER | read-write | 0 indicates the telnet protocol is not enabled. 1 indicates that the telnet protocol is enabled. Writing a non-zero value will enable the telnet protocol if it is supported by the firmware. |
| broriginalEWS | 1.3.6.1.4.1.2435.2.4.3.2435.5.17 | |||
| INT brEWSSupported | 1.3.6.1.4.1.2435.2.4.3.2435.5.17.1 | INTEGER | read-only | 0 indicates the EWS protocol is not supported. 1 indicates EWS support is implemented by the firmware |
| INT brEWSEnable | 1.3.6.1.4.1.2435.2.4.3.2435.5.17.2 | INTEGER | read-write | 0 indicates the EWS protocol is not enabled. 1 indicates that the EWS protocol is enabled. Writing a non-zero value will enable the EWS protocol if it is supported by the firmware. |
| INT brEWSRegularPortEnable | 1.3.6.1.4.1.2435.2.4.3.2435.5.17.3 | INTEGER | read-write | 0 indicates that the EWS regular port is not enabled. 1 indicates that the EWS regular port is enabled. |
| INT brEWSSSLPortEnable | 1.3.6.1.4.1.2435.2.4.3.2435.5.17.4 | INTEGER | read-write | 0 indicates that the EWS SSL port is not enabled. 1 indicates that the EWS SSL port is enabled. |
| broriginalSNMP | 1.3.6.1.4.1.2435.2.4.3.2435.5.18 | |||
| INT brSNMPSupported | 1.3.6.1.4.1.2435.2.4.3.2435.5.18.1 | INTEGER | read-only | 0 indicates the SNMP protocol is not supported. 1 indicates SNMP support is implemented by the firmware |
| INT brSNMPEnable | 1.3.6.1.4.1.2435.2.4.3.2435.5.18.2 | INTEGER | read-write | 0 indicates the SNMP protocol is not enabled. 1 indicates that the SNMP protocol is enabled. Writing a non-zero value will enable the SNMP protocol if it is supported by the firmware. |
| INT brSNMPV3Supported | 1.3.6.1.4.1.2435.2.4.3.2435.5.18.10 | INTEGER | read-only | 0 indicates SNMPv3 is not supported. 1 indicates SNMPv3 is supported. |
| INT brSNMPCommMode | 1.3.6.1.4.1.2435.2.4.3.2435.5.18.11 | INTEGER | read-write | 1 indicates v1/v2c read-write access is enable. 2 indicates v3 read-write access is enable. 3 indicates v1/v2c read-only access and v3 read-write access is enable. |
| STR brSNMPV3UserName | 1.3.6.1.4.1.2435.2.4.3.2435.5.18.12 | DisplayString | read-write | The username of SNMPv3. |
| INT brSNMPV3KeyType | 1.3.6.1.4.1.2435.2.4.3.2435.5.18.13 | INTEGER | read-write | 1 indicates that the key type of SNMPv3 is ASCII. 2 indicates that the key type of SNMPv3 is HEX |
| OCT brSNMPV3AuthKey | 1.3.6.1.4.1.2435.2.4.3.2435.5.18.14 | OCTET STRING | read-write | The authentication key of SNMPv3. |
| STR brSNMPV3AuthPassword | 1.3.6.1.4.1.2435.2.4.3.2435.5.18.15 | DisplayString | read-write | The authentication password of SNMPv3. |
| OCT brSNMPV3PrivKey | 1.3.6.1.4.1.2435.2.4.3.2435.5.18.16 | OCTET STRING | read-write | The privacy key of SNMPv3. |
| STR brSNMPV3PrivPassword | 1.3.6.1.4.1.2435.2.4.3.2435.5.18.17 | DisplayString | read-write | The privacy password of SNMPv3. |
| STR brSNMPV3ContextName | 1.3.6.1.4.1.2435.2.4.3.2435.5.18.18 | DisplayString | read-write | The contextname of SNMPv3. |
| broriginalldap | 1.3.6.1.4.1.2435.2.4.3.2435.5.19 | |||
| INT brLdapSupported | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.1 | INTEGER | read-only | 0 indicates the LDAP client is not supported. 1 indicates the LDAP client is implemented by the firmware |
| INT brLdapEnable | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.2 | INTEGER | read-write | 0 indicates the LDAP client is not enabled. 1 indicates that the LDAP client is enabled. Writing a non-zero value will enable the Ldap if it is supported by the firmware. |
| INT brLdapTimeout | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.3 | INTEGER | read-write | timeout value (sec) for LDAP server. |
| INT brLdapTimeoutSupported | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.4 | INTEGER | read-only | 0 indicates the LDAP timeout is not supported. 1 indicates the LDAP timeout is implemented by the firmware |
| INT brLdapServerCount | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.11 | INTEGER | read-only | Maximum number of LDAP Server INDEX. |
| brLdapServerInfoTable | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12 | not-accessible | This table represents LDAP Server Info. | |
| brLdapServerInfoEntry | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1 | not-accessible | A row in the LdapServerInfo table. Rows cannot be created or deleted. | |
| INT brLdapServerInfoIndex | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.1 | INTEGER | read-only | The number. |
| STR brLdapServerName | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.2 | DisplayString | read-write | The LDAP server name. |
| INT brLdapServerPort | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.3 | INTEGER | read-write | The LDAP server port number. |
| INT brLdapServerAuth | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.4 | INTEGER | read-write | The LDAP server authentication method. |
| OCT brLdapServerUserDN | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.5 | OCTET STRING | read-write | The LDAP server user DN. |
| OCT brLdapServerPassword | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.6 | OCTET STRING | read-write | The LDAP server password. |
| INT brLdapServerPasswordSet | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.7 | INTEGER | read-only | Returns 1 if the LDAP server password is set, 0 if not set. |
| OCT brLdapServerBaseDN | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.8 | OCTET STRING | read-write | The LDAP server base DN. |
| STR brLdapServerAttrEMail | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.10 | DisplayString | read-write | The LDAP server attribute or e-mail. |
| STR brLdapServerAttrFAXNumber | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.11 | DisplayString | read-write | The LDAP server attribute or facsimile telephone number. |
| STR brLdapServerAttrDetail1 | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.12 | DisplayString | read-write | The LDAP server attribute or detail 1. |
| STR brLdapServerAttrDetail2 | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.13 | DisplayString | read-write | The LDAP server attribute or detail 2. |
| STR brLdapServerAttrDetail3 | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.14 | DisplayString | read-write | The LDAP server attribute or detail 3. |
| STR brLdapServerAttrDetail4 | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.15 | DisplayString | read-write | The LDAP server attribute or detail 4. |
| INT brLdapServerAttrDetailEnable1 | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.16 | INTEGER | read-write | Enable flag of the LDAP server attribute of detail 1. |
| INT brLdapServerAttrDetailEnable2 | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.17 | INTEGER | read-write | Enable flag of the LDAP server attribute of detail 2. |
| INT brLdapServerAttrDetailEnable3 | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.18 | INTEGER | read-write | Enable flag of the LDAP server attribute of detail 3. |
| INT brLdapServerAttrDetailEnable4 | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.19 | INTEGER | read-write | Enable flag of the LDAP server attribute of detail 4. |
| STR brLdapKerberosServerName | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.20 | DisplayString | read-write | The Kerberos server name for LDAP. |
| INT brLdapKerberosServerPort | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.21 | INTEGER | read-write | The Kerberos server port number for LDAP. |
| INT brLdapServerAttrNameCount | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.21 | INTEGER | read-only | Maximum number of LDAP Server Attribute of name INDEX. |
| brLdapServerAttrNameTable | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.22 | not-accessible | This table represents LDAP Server Attribute of name. | |
| brLdapServerAttrNameEntry | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.22.1 | not-accessible | A row in the LdapServerAttributeName table. Rows cannot be created or deleted. | |
| INT brLdapServerAttrNameIndex | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.22.1.1 | INTEGER | read-only | The number. |
| STR brLdapServerAttrName | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.22.1.2 | DisplayString | read-write | The LDAP server attribute of name. |
| INT brLdapSetDefault | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.99 | INTEGER | read-write | Setting the value resets all LDAP parameters to their factory default value. |
| broriginalTFTP | 1.3.6.1.4.1.2435.2.4.3.2435.5.20 | |||
| INT brTFTPSupported | 1.3.6.1.4.1.2435.2.4.3.2435.5.20.1 | INTEGER | read-only | 0 indicates the TFTP protocol is not supported. 1 indicates TFTP support is implemented by the firmware |
| INT brTFTPEnable | 1.3.6.1.4.1.2435.2.4.3.2435.5.20.2 | INTEGER | read-write | 0 indicates the TFTP protocol is not enabled. 1 indicates that the TFTP protocol is enabled. Writing a non-zero value will enable the TFTP protocol if it is supported by the firmware. |
| broriginalHTTPS | 1.3.6.1.4.1.2435.2.4.3.2435.5.21 | |||
| INT brHTTPSSupported | 1.3.6.1.4.1.2435.2.4.3.2435.5.21.1 | INTEGER | read-only | 0 indicates the HTTPS/IPPS protocol is not supported. 1 indicates HTTPS/IPPS support is implemented by the firmware |
| INT brHTTPSEnable | 1.3.6.1.4.1.2435.2.4.3.2435.5.21.2 | INTEGER | read-write | 0 indicates the HTTPS/IPPS protocol is not enabled. 1 indicates that the HTTPS/IPPS protocol is enabled. Writing a non-zero value will enable the HTTPS/IPPS protocol if it is supported by the firmware. |
| broriginalLPD | 1.3.6.1.4.1.2435.2.4.3.2435.5.22 | |||
| INT brLPDSupported | 1.3.6.1.4.1.2435.2.4.3.2435.5.22.1 | INTEGER | read-only | 0 indicates the LPD protocol is not supported. 1 indicates LPD support is implemented by the firmware |
| INT brLPDEnable | 1.3.6.1.4.1.2435.2.4.3.2435.5.22.2 | INTEGER | read-write | 0 indicates the LPD protocol is not enabled. 1 indicates that the LPD protocol is enabled. Writing a non-zero value will enable the LPD protocol if it is supported by the firmware. |
| broriginalRawPort | 1.3.6.1.4.1.2435.2.4.3.2435.5.23 | |||
| INT brRawPortSupported | 1.3.6.1.4.1.2435.2.4.3.2435.5.23.1 | INTEGER | read-only | 0 indicates the RawPort protocol is not supported. 1 indicates RawPort support is implemented by the firmware |
| INT brRawPortEnable | 1.3.6.1.4.1.2435.2.4.3.2435.5.23.2 | INTEGER | read-write | 0 indicates the RawPort protocol is not enabled. 1 indicates that the RawPort protocol is enabled. Writing a non-zero value will enable the RawPort protocol if it is supported by the firmware. |
| broriginalLLTD | 1.3.6.1.4.1.2435.2.4.3.2435.5.24 | |||
| INT brLLTDSupported | 1.3.6.1.4.1.2435.2.4.3.2435.5.24.1 | INTEGER | read-only | 0 indicates the LLTD protocol is not supported. 1 indicates LLTD support is implemented by the firmware |
| INT brLLTDEnable | 1.3.6.1.4.1.2435.2.4.3.2435.5.24.2 | INTEGER | read-write | 0 indicates the LLTD protocol is not enabled. 1 indicates that the LLTD protocol is enabled. Writing a non-zero value will enable the LLTD protocol if it is supported by the firmware. |
| broriginalWebServices | 1.3.6.1.4.1.2435.2.4.3.2435.5.25 | |||
| INT brWebServicesSupported | 1.3.6.1.4.1.2435.2.4.3.2435.5.25.1 | INTEGER | read-only | 0 indicates the WebServices protocol is not supported. 1 indicates WebServices support is implemented by the firmware |
| INT brWebServicesEnable | 1.3.6.1.4.1.2435.2.4.3.2435.5.25.2 | INTEGER | read-write | 0 indicates the WebServices protocol is not enabled. 1 indicates that the WebServices protocol is enabled. Writing a non-zero value will enable the WebServices protocol if it is supported by the firmware. |
| INT brWebServicesRegularPortEnable | 1.3.6.1.4.1.2435.2.4.3.2435.5.25.3 | INTEGER | read-write | 0 indicates that the WebServices regular port is not enabled. 1 indicates that the WebServices regular port is enabled. |
| INT brWebServicesSSLPortEnable | 1.3.6.1.4.1.2435.2.4.3.2435.5.25.4 | INTEGER | read-write | 0 indicates that the WebServices SSL port is not enabled. 1 indicates that the WebServices SSL port is enabled. |
| broriginalLLMNR | 1.3.6.1.4.1.2435.2.4.3.2435.5.26 | |||
| INT brLLMNREnable | 1.3.6.1.4.1.2435.2.4.3.2435.5.26.1 | INTEGER | read-write | 0 indicates the LLMNR protocol is not enabled. 1 indicates that the LLMNR protocol is enabled. |
| broriginalKerberos | 1.3.6.1.4.1.2435.2.4.3.2435.5.27 | |||
| INT brKerberosSupported | 1.3.6.1.4.1.2435.2.4.3.2435.5.27.1 | INTEGER | read-only | 0 indicates the Kerberos protocol is not supported. 1 indicates Kerberos support is implemented by the firmware |
| broriginalCIFS | 1.3.6.1.4.1.2435.2.4.3.2435.5.28 | |||
| INT brCIFSSupported | 1.3.6.1.4.1.2435.2.4.3.2435.5.28.1 | INTEGER | read-only | 0 indicates the CIFS protocol is not supported. 1 indicates CIFS support is implemented by the firmware |
| INT brCIFSEnable | 1.3.6.1.4.1.2435.2.4.3.2435.5.28.2 | INTEGER | read-write | 0 indicates the CIFS protocol is not enabled. 1 indicates that the CIFS protocol is enabled. Writing a non-zero value will enable the CIFS protocol if it is supported by the firmware. |
| broriginalSNTP | 1.3.6.1.4.1.2435.2.4.3.2435.5.29 | |||
| INT brSNTPCSupported | 1.3.6.1.4.1.2435.2.4.3.2435.5.29.1 | INTEGER | read-only | 0 indicates the SNTP is not supported. 1 indicates SNTP is supported. |
| INT brSNTPCEnable | 1.3.6.1.4.1.2435.2.4.3.2435.5.29.2 | INTEGER | read-write | 0 indicates the SNTP is not disabled. 1 indicates that the SNTP is enabled. |
| INT brSNTPCServerMethod | 1.3.6.1.4.1.2435.2.4.3.2435.5.29.3 | INTEGER | read-write | 1 indicates SNTP Server Method is AUTO. 2 indicates SNTP Server Method is STATIC. 3 indicates SNTP Server Method is PRESET. |
| INT brSNTPCSyncMethod | 1.3.6.1.4.1.2435.2.4.3.2435.5.29.4 | INTEGER | read-write | 1 indicates Synchronous Method is AUTO. 2 indicates Synchronous Method is STATIC. |
| INT brSNTPCIntervalMin | 1.3.6.1.4.1.2435.2.4.3.2435.5.29.5 | INTEGER | read-write | The minimum value of synchronous interval. |
| INT brSNTPCInterval | 1.3.6.1.4.1.2435.2.4.3.2435.5.29.6 | INTEGER | read-write | The synchronous interval is used for synchronous method INTERVAL. |
| INT brSNTPCSyncResult | 1.3.6.1.4.1.2435.2.4.3.2435.5.29.7 | INTEGER | read-only | The result of the last checking time. 1: Success 2: Synchronizing 3: Failed 4: Not yet checking |
| STR brSNTPCPrimaryServerName | 1.3.6.1.4.1.2435.2.4.3.2435.5.29.8 | DisplayString | read-write | The primary server name of SNTP. |
| INT brSNTPCPrimaryServerPort | 1.3.6.1.4.1.2435.2.4.3.2435.5.29.9 | INTEGER | read-write | The port number of primary SNTP server. |
| STR brSNTPCSecondaryServerName | 1.3.6.1.4.1.2435.2.4.3.2435.5.29.10 | DisplayString | read-write | The secondary server name of SNTP. |
| INT brSNTPCSecondaryServerPort | 1.3.6.1.4.1.2435.2.4.3.2435.5.29.11 | INTEGER | read-write | The port number of secondary SNTP server. |
| broriginalSecurity | 1.3.6.1.4.1.2435.2.4.3.2435.5.100 | |||
| brSecurityGeneralStatus | 1.3.6.1.4.1.2435.2.4.3.2435.5.100.1 | |||
| INT brDeviceNegotiationEncryptVer | 1.3.6.1.4.1.2435.2.4.3.2435.5.100.1.1 | INTEGER | read-only | |
| INT brpsServerCertificateNum | 1.3.6.1.4.1.2435.2.4.3.2435.5.100.1.2 | INTEGER | read-only | |
| brSecurityGeneralSetup | 1.3.6.1.4.1.2435.2.4.3.2435.5.100.2 | |||
| brSecurityDeviceNegotiation | 1.3.6.1.4.1.2435.2.4.3.2435.5.100.10 | |||
| OCT brDeviceNegotiationGetChallenge | 1.3.6.1.4.1.2435.2.4.3.2435.5.100.10.1 | OCTET STRING | read-only | |
| OCT brDeviceNegotiationConfirmPassword | 1.3.6.1.4.1.2435.2.4.3.2435.5.100.10.2 | OCTET STRING | read-write | |
| OCT brDeviceNegotiationChangePassword | 1.3.6.1.4.1.2435.2.4.3.2435.5.100.10.3 | OCTET STRING | read-write | |
| broriginalinternetsetting | 1.3.6.1.4.1.2435.2.4.3.2435.10 | |||
| broriginalproxy | 1.3.6.1.4.1.2435.2.4.3.2435.10.1 | |||
| INT brProxySupported | 1.3.6.1.4.1.2435.2.4.3.2435.10.1.1 | INTEGER | read-only | 0 indicates the Proxy is not supported. 1 indicates Proxy is implemented by the firmware |
| INT brProxyEnable | 1.3.6.1.4.1.2435.2.4.3.2435.10.1.2 | INTEGER | read-write | 0 indicates the Proxy is not enabled. 1 indicates that the Proxy is enabled. Writing a non-zero value will enable the Proxy if it is supported by the firmware. |
| INT brProxyBypassServer | 1.3.6.1.4.1.2435.2.4.3.2435.10.1.3 | INTEGER | read-write | on(2) indicates the bypass proxy server for local addresses. |
| INT brProxyServerCount | 1.3.6.1.4.1.2435.2.4.3.2435.10.1.11 | INTEGER | read-only | Maximum number of Proxy Server INDEX. |
| brProxyServerInfoTable | 1.3.6.1.4.1.2435.2.4.3.2435.10.1.12 | not-accessible | This table represents Proxy Server Info. | |
| brProxyServerInfoEntry | 1.3.6.1.4.1.2435.2.4.3.2435.10.1.12.1 | not-accessible | A row in the ProxyServerInfo table. Rows cannot be created or deleted. | |
| INT brProxyServerInfoIndex | 1.3.6.1.4.1.2435.2.4.3.2435.10.1.12.1.1 | INTEGER | read-only | The number. |
| INT brProxyServerType | 1.3.6.1.4.1.2435.2.4.3.2435.10.1.12.1.2 | INTEGER | read-write | The Proxy server ID. |
| OCT brProxyServerName | 1.3.6.1.4.1.2435.2.4.3.2435.10.1.12.1.3 | OCTET STRING | read-write | The Proxy server name. |
| INT brProxyServerPort | 1.3.6.1.4.1.2435.2.4.3.2435.10.1.12.1.4 | INTEGER | read-write | The Proxy server port number. |
| broriginalOtherSetting | 1.3.6.1.4.1.2435.2.4.3.2435.20 | |||
| broriginalJobTermination | 1.3.6.1.4.1.2435.2.4.3.2435.20.1 | |||
| INT brJobTerminationSupported | 1.3.6.1.4.1.2435.2.4.3.2435.20.1.1 | INTEGER | read-only | 0 indicates the Job termination setting is not supported. 1 indicates the Job termination setting is implemented by the firmware |
| INT brJobTerminationEnable | 1.3.6.1.4.1.2435.2.4.3.2435.20.1.2 | INTEGER | read-write | 0 indicates the Job termination setting is not enabled. 1 indicates the Job termination setting is enabled. |
| broriginalSNMPTrap | 1.3.6.1.4.1.2435.2.4.3.2435.20.2 | |||
| brSNMPTrapTable | 1.3.6.1.4.1.2435.2.4.3.2435.20.2.1 | not-accessible | ||
| brSNMPTrapEntry | 1.3.6.1.4.1.2435.2.4.3.2435.20.2.1.1 | not-accessible | ||
| INT brSNMPTrapIndex | 1.3.6.1.4.1.2435.2.4.3.2435.20.2.1.1.1 | INTEGER | read-only | The number. |
| IP brTCPIPServerAddress | 1.3.6.1.4.1.2435.2.4.3.2435.20.2.1.1.2 | IpAddress | read-write | The Destination IP Address for SNMP Trap. |
| broriginalLegacy | 1.3.6.1.4.1.2435.2.4.3.2435.20.3 | |||
| INT brLegacyCompatible | 1.3.6.1.4.1.2435.2.4.3.2435.20.3.1 | INTEGER | read-write | |
| npMultiCards | 1.3.6.1.4.1.2435.2.4.4 | |||
| npMultiIFSet | 1.3.6.1.4.1.2435.2.4.4.99 | |||
| brMultiIFdns | 1.3.6.1.4.1.2435.2.4.4.99.1 | |||
| brMultiIFDNSTable | 1.3.6.1.4.1.2435.2.4.4.99.1.1 | not-accessible | ||
| brMultiIFDNSEntry | 1.3.6.1.4.1.2435.2.4.4.99.1.1.1 | not-accessible | ||
| INT brMultiIFTCPIPDNSIPSetup | 1.3.6.1.4.1.2435.2.4.4.99.1.1.1.1 | INTEGER | read-write | DNS mode 1:static 2:auto |
| IP brMultiIFPrimaryDNSIPAddress | 1.3.6.1.4.1.2435.2.4.4.99.1.1.1.2 | IpAddress | read-write | Primary DNS IP Address |
| IP brMultiIFSecondaryDNSIPAddress | 1.3.6.1.4.1.2435.2.4.4.99.1.1.1.3 | IpAddress | read-write | Secondary DNS IP Address |
| INT brMultiIFTCPIPConnectTime | 1.3.6.1.4.1.2435.2.4.4.99.1.1.1.4 | INTEGER | read-write | TCP/IP connect time. |
| brnetMultiIFConfig | 1.3.6.1.4.1.2435.2.4.4.1240 | |||
| brMultiIFconfig | 1.3.6.1.4.1.2435.2.4.4.1240.1 | |||
| INT brMultiIFSupported | 1.3.6.1.4.1.2435.2.4.4.1240.1.1 | INTEGER | read-only | 0 indicates the Multi Interface is not supported. 1 indicates Multi Interface is supported. |
| INT brMultiIFActiveIF | 1.3.6.1.4.1.2435.2.4.4.1240.1.2 | INTEGER | read-only | 1 LAN 2 Wireless LAN 3 Both |
| INT brMultiIFAllSetDefault | 1.3.6.1.4.1.2435.2.4.4.1240.1.3 | INTEGER | read-write | Setting the value resets all parameters to their factory default value. |
| INT brMultiIFCount | 1.3.6.1.4.1.2435.2.4.4.1240.1.4 | INTEGER | read-only | MultiIF Count |
| brMultiIFConfigureTable | 1.3.6.1.4.1.2435.2.4.4.1240.1.5 | not-accessible | ||
| brMultiIFConfigureEntry | 1.3.6.1.4.1.2435.2.4.4.1240.1.5.1 | not-accessible | ||
| INT brMultiIFConfigureIndex | 1.3.6.1.4.1.2435.2.4.4.1240.1.5.1.1 | INTEGER | read-only | The number. |
| INT brMultiIFType | 1.3.6.1.4.1.2435.2.4.4.1240.1.5.1.2 | INTEGER | read-only | Interface Type |
| STR brMultiIFDescription | 1.3.6.1.4.1.2435.2.4.4.1240.1.5.1.3 | DisplayString | read-only | Interface Description |
| OCT brMultiIFNodeName | 1.3.6.1.4.1.2435.2.4.4.1240.1.5.1.4 | OCTET STRING | read-write | An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name. |
| INT brMultiIFInterfaceEnable | 1.3.6.1.4.1.2435.2.4.4.1240.1.5.1.5 | INTEGER | read-write | 0 indicates the Interfase is not enabled. 1 indicates the Interfase is enabled. |
| INT brMultiIFEnetMode | 1.3.6.1.4.1.2435.2.4.4.1240.1.5.1.6 | INTEGER | read-write | Ethernet type. |
| INT brMultiIFHardwareType | 1.3.6.1.4.1.2435.2.4.4.1240.1.5.1.7 | INTEGER | read-only | Hardware type of the print server. |
| OCT brMultiIFNodeType | 1.3.6.1.4.1.2435.2.4.4.1240.1.5.1.8 | OCTET STRING | read-only | A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software. It is mandatory that this only contain printable ASCII characters. |
| INT brMultiIFInterfaceEnableImmediate | 1.3.6.1.4.1.2435.2.4.4.1240.1.5.1.9 | INTEGER | read-write | |
| INT brMultiIFPrimaryInterface | 1.3.6.1.4.1.2435.2.4.4.1240.1.6 | INTEGER | read-write | Primary Interface |
| INT brMultiIFInterfaceInformation | 1.3.6.1.4.1.2435.2.4.4.1240.1.7 | INTEGER | read-only | 0bit Auto 1bit manual 2bit enable both 3bit disable both |
| brMultiIFcontrol | 1.3.6.1.4.1.2435.2.4.4.1240.2 | |||
| brMultiIFControlTable | 1.3.6.1.4.1.2435.2.4.4.1240.2.1 | not-accessible | ||
| brMultiIFControlEntry | 1.3.6.1.4.1.2435.2.4.4.1240.2.1.1 | not-accessible | ||
| INT brMultiIFSetDefault | 1.3.6.1.4.1.2435.2.4.4.1240.2.1.1.1 | INTEGER | read-write | Setting the value resets all parameters to their factory default value. |
| brMultiIFservice | 1.3.6.1.4.1.2435.2.4.4.1240.4 | |||
| brMultiIFServiceTable | 1.3.6.1.4.1.2435.2.4.4.1240.4.1 | not-accessible | ||
| brMultiIFServiceEntry | 1.3.6.1.4.1.2435.2.4.4.1240.4.1.1 | not-accessible | ||
| INT brMultiIFServiceCount | 1.3.6.1.4.1.2435.2.4.4.1240.4.1.1.1 | INTEGER | read-only | Number of services on this print server. |
| INT brMultiIFServiceStringLimit | 1.3.6.1.4.1.2435.2.4.4.1240.4.1.1.2 | INTEGER | read-only | Maximum number of service strings supported by the print server. |
| INT brMultiIFServiceStringCount | 1.3.6.1.4.1.2435.2.4.4.1240.4.1.1.3 | INTEGER | read-only | Number of service strings currently defined on the print server. |
| INT brMultiIFServiceFilterCount | 1.3.6.1.4.1.2435.2.4.4.1240.4.1.1.4 | INTEGER | read-only | Number of service filters implemented by the device. |
| brMultiIFServiceInfoTable | 1.3.6.1.4.1.2435.2.4.4.1240.4.2 | not-accessible | This table represents the attributes of a service. | |
| brMultiIFServiceInfoEntry | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1 | not-accessible | A row in the services table. Rows cannot be created or deleted via direct SNMP operations. | |
| INT brMultiIFServiceIndex | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.1 | INTEGER | read-only | The service number. |
| STR brMultiIFServiceName | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.2 | DisplayString | read-write | The service name. |
| INT brMultiIFServicePort | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.3 | INTEGER | read-write | The port number assigned to this service. |
| INT brMultiIFServiceFilter | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.4 | INTEGER | read-write | Filter number assigned to this service. |
| INT brMultiIFServiceBOT | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.5 | INTEGER | read-write | Beginning of text string number assigned to this service. |
| INT brMultiIFServiceEOT | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.6 | INTEGER | read-write | End of text string number assigned to this service. |
| INT brMultiIFServiceMatch | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.7 | INTEGER | read-write | Match string number assigned to this service. |
| INT brMultiIFServiceReplace | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.8 | INTEGER | read-write | Replace string number assigned to this service. |
| INT brMultiIFServiceTCPPort | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.9 | INTEGER | read-write | TCP Port number assigned to this service. |
| STR brMultiIFServiceNDSTree | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.10 | DisplayString | read-write | The NDS Tree. |
| OCT brMultiIFServiceNDSContext | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.11 | OCTET STRING | read-write | The NDS Context in Unicode. |
| STR brMultiIFServiceVines | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.12 | DisplayString | read-write | The Vines StreetTalk name for this service. |
| INT brMultiIFServiceObsolete | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.13 | INTEGER | read-write | Obsolete parameter that is no longer used |
| INT brMultiIFServiceNetwareServerCount | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.14 | INTEGER | read-write | The number of Netware servers enabled on this service. Modifying the value will truncate the server list to the specified number of servers. If the value set is greater than the number of servers currently on the list, then the list will be unchanged. |
| INT brMultiIFServiceReceiveOnly | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.15 | INTEGER | read-write | When enabled, the service will only receive data, any printer responses will be discarded. |
| INT brMultiIFServiceTCPQueued | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.16 | INTEGER | read-write | When enabled, the raw TCP connections to the port will be queued while waiting for the port to become available |
| INT brMultiIFServiceProtocolLAT | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.17 | INTEGER | read-write | When enabled, the LAT protocol will be available on this service. |
| INT brMultiIFServiceProtocolTCPIP | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.18 | INTEGER | read-write | When enabled, the TCP/IP protocol will be available on this service. |
| INT brMultiIFServiceProtocolNetware | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.19 | INTEGER | read-write | When enabled, the Netware protocol will be available on this service. |
| INT brMultiIFServiceProtocolAppleTalk | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.20 | INTEGER | read-write | When enabled, the AppleTalk protocol will be available on this service. |
| INT brMultiIFServiceProtocolBanyan | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.21 | INTEGER | read-write | When enabled, the Banyan protocol will be available on this service. |
| INT brMultiIFServiceProtocolDLC | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.22 | INTEGER | read-write | When enabled, the DLC protocol will be available on this service. |
| INT brMultiIFServiceProtocolNetBEUI | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.23 | INTEGER | read-write | When enabled, the NetBEUI protocol will be available on this service. |
| INT brMultiIFServiceNetwareServerMode | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.24 | INTEGER | read-write | Netware mode for this service. 0 = Queue Server, 1 = Remote Printer |
| INT brMultiIFServiceNetwareRemotePrinterNum | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.25 | INTEGER | read-write | Remote Printer Number for this service |
| INT brMultiIFServiceProtocolIPP | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.26 | INTEGER | read-write | When enabled, the IPP protocol will be available on this service. |
| STR brMultiIFServiceAppleTalkType | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.27 | DisplayString | read-write | AppleTalk type. |
| brMultiIFServiceStringInfoTable | 1.3.6.1.4.1.2435.2.4.4.1240.4.3 | not-accessible | This table represents the service BOT/EOT/MATCH/REPLACE strings defined. | |
| brMultiIFServiceStringInfoEntry | 1.3.6.1.4.1.2435.2.4.4.1240.4.3.1 | not-accessible | A row in the service string table. Rows cannot be created or deleted via direct SNMP operations. | |
| INT brMultiIFServiceStringIndex | 1.3.6.1.4.1.2435.2.4.4.1240.4.3.1.1 | INTEGER | read-only | The string number. |
| STR brMultiIFServiceString | 1.3.6.1.4.1.2435.2.4.4.1240.4.3.1.2 | DisplayString | read-write | The character string definition suitable for displaying. |
| brMultiIFprotocol | 1.3.6.1.4.1.2435.2.4.4.1240.5 | |||
| brMultiIFtcpip | 1.3.6.1.4.1.2435.2.4.4.1240.5.2 | |||
| brMultiIFTCPIPTable | 1.3.6.1.4.1.2435.2.4.4.1240.5.2.1 | not-accessible | ||
| brMultiIFTCPIPEntry | 1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1 | not-accessible | ||
| IP brMultiIFTCPIPAddress | 1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1.1 | IpAddress | read-write | IP Address assigned to the print server. |
| IP brMultiIFTCPIPSubnetMask | 1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1.2 | IpAddress | read-write | Subnet mask assigned to the print server. |
| IP brMultiIFTCPIPGateway | 1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1.3 | IpAddress | read-write | Gateway/Router address assigned to the print server |
| INT brMultiIFTCPIPMethod | 1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1.4 | INTEGER | read-write | Method used to determine the IP Address. AUTO tries all protocols. STATIC uses the configured address. DHCP, BOOTP, and RARP use only that protocol. |
| OCT brMultiIFTCPIPUpdate | 1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1.5 | OCTET STRING | read-write | Hardware MAC address to be updated. This value is write only. Will read back as zeros. |
| INT brMultiIFTCPIPTimeout | 1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1.6 | INTEGER | read-write | Timeout used for LPD connections. |
| INT brMultiIFTCPIPBootTries | 1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1.7 | INTEGER | read-write | Number of attempts to use BOOTP, RARP, and DHCP. |
| INT brMultiIFTCPIPRARPNoSubnet | 1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1.8 | INTEGER | read-write | If enabled, do not set the subnet mask based on the RARP response. |
| INT brMultiIFTCPIPRARPNoGateway | 1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1.9 | INTEGER | read-write | If enabled, do not set the gateway/router address based on the RARP response. |
| INT brMultiIFTCPIPUseMethod | 1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1.10 | INTEGER | read-write | Method type that used set up TCP/IP configuration. |
| IP brMultiIFTCPIPMethodServer | 1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1.11 | IpAddress | read-write | If TCP/IP configuration is setted up by any protocol server, this entry indicates the IP address of the server. |
| brMultiIFnetbeui | 1.3.6.1.4.1.2435.2.4.4.1240.5.8 | |||
| brMultiIFNetBIOSTable | 1.3.6.1.4.1.2435.2.4.4.1240.5.8.1 | not-accessible | ||
| brMultiIFNetBIOSEntry | 1.3.6.1.4.1.2435.2.4.4.1240.5.8.1.1 | not-accessible | ||
| INT brMultiIFNetBIOSIPMethod | 1.3.6.1.4.1.2435.2.4.4.1240.5.8.1.1.1 | INTEGER | read-write | Method used to determine the IP Address of the WINS server. AUTO tries all protocols (currently only DHCP is tried). STATIC uses the configured address. |
| IP brMultiIFTCPIPNetBIOSPrimaryWINSAddr | 1.3.6.1.4.1.2435.2.4.4.1240.5.8.1.1.2 | IpAddress | read-write | The IP Address of the primary WINS server. |
| IP brMultiIFTCPIPNetBIOSSecondaryWINSAddr | 1.3.6.1.4.1.2435.2.4.4.1240.5.8.1.1.3 | IpAddress | read-write | The IP Address of the secondary WINS server. |
| STR brMultiIFNetBEUIDomain | 1.3.6.1.4.1.2435.2.4.4.1240.5.8.1.1.4 | DisplayString | read-write | The NetBEUI domain name. |
| brMultiIForiginalapipa | 1.3.6.1.4.1.2435.2.4.4.1240.5.12 | |||
| brMultiIFAPIPATable | 1.3.6.1.4.1.2435.2.4.4.1240.5.12.1 | not-accessible | ||
| brMultiIFAPIPAEntry | 1.3.6.1.4.1.2435.2.4.4.1240.5.12.1.1 | not-accessible | ||
| INT brMultiIFAPIPASupported | 1.3.6.1.4.1.2435.2.4.4.1240.5.12.1.1.1 | INTEGER | read-only | 0 indicates the APIPA protocol is not supported. 1 indicates APIPA support is implemented by the firmware |
| INT brMultiIFAPIPAEnable | 1.3.6.1.4.1.2435.2.4.4.1240.5.12.1.1.2 | INTEGER | read-write | 0 indicates the APIPA protocol is not enabled. 1 indicates that the APIPA protocol is enabled. Writing a non-zero value will enable the APIPA protocol if it is supported by the firmware. |
| brMultiIForiginalLAA | 1.3.6.1.4.1.2435.2.4.4.1240.5.14 | |||
| brMultiIFLAATable | 1.3.6.1.4.1.2435.2.4.4.1240.5.14.1 | not-accessible | ||
| brMultiIFLAAEntry | 1.3.6.1.4.1.2435.2.4.4.1240.5.14.1.1 | not-accessible | ||
| INT brMultiIFLAASupported | 1.3.6.1.4.1.2435.2.4.4.1240.5.14.1.1.1 | INTEGER | read-only | This value indicate if the locally administered addressing is supported. 0: Not Supported 1: Supported |
| OCT brMultiIFLAAMacAddress | 1.3.6.1.4.1.2435.2.4.4.1240.5.14.1.1.2 | OCTET STRING | read-write | A locally administered address (LAA) that replaces the factory-assigned MAC address (UAA: universally administered address). If this setting is all-zero address (i.e. 6 bytes of zeros), the factory-assigned MAC address is used as the MAC address of the device. The LAA address must start with X2, X6, XA, or XE, where X is any hexadecimal digit 0 to F. |
| brMultiIForiginalIPv6 | 1.3.6.1.4.1.2435.2.4.4.1240.5.15 | |||
| brMultiIFIPv6AddressCountTable | 1.3.6.1.4.1.2435.2.4.4.1240.5.15.1 | not-accessible | ||
| brMultiIFIPv6AddressCountEntry | 1.3.6.1.4.1.2435.2.4.4.1240.5.15.1.1 | not-accessible | ||
| INT brMultiIFIPv6AddressCount | 1.3.6.1.4.1.2435.2.4.4.1240.5.15.1.1.1 | INTEGER | read-only | IPv6Address Counter. |
| brMultiIFIPv6AddressTable | 1.3.6.1.4.1.2435.2.4.4.1240.5.15.2 | not-accessible | ||
| brMultiIFIPv6AddressEntry | 1.3.6.1.4.1.2435.2.4.4.1240.5.15.2.1 | not-accessible | ||
| INT brMultiIFIPv6AddressIndex | 1.3.6.1.4.1.2435.2.4.4.1240.5.15.2.1.1 | INTEGER | read-only | index |
| ADR brMultiIFIPv6Address | 1.3.6.1.4.1.2435.2.4.4.1240.5.15.2.1.2 | Ipv6Address | read-only | |
| INT brMultiIFIPv6UseMethod | 1.3.6.1.4.1.2435.2.4.4.1240.5.15.2.1.3 | INTEGER | read-only | Method type that used set up TCP/IP configuration. 0: Unknown (Information not supported) 1: Manually 2: DHCPv6 3: Stateless Address Auto-configuration 4: Reserved 5: Link Local |
| STR brMultiIFIPv6MethodServer | 1.3.6.1.4.1.2435.2.4.4.1240.5.15.2.1.4 | DisplayString | read-only | If TCP/IP configuration is setted up by any protocol server, this entry indicates the IP address of the server. |
| brMultiIFIPv6StaticAddressCountTable | 1.3.6.1.4.1.2435.2.4.4.1240.5.15.3 | not-accessible | ||
| brMultiIFIPv6StaticAddressCountEntry | 1.3.6.1.4.1.2435.2.4.4.1240.5.15.3.1 | not-accessible | ||
| INT brMultiIFIPv6StaticAddressCount | 1.3.6.1.4.1.2435.2.4.4.1240.5.15.3.1.1 | INTEGER | read-only | IPv6StaticAddress Counter. |
| brMultiIFIPv6StaticAddressTable | 1.3.6.1.4.1.2435.2.4.4.1240.5.15.4 | not-accessible | ||
| brMultiIFIPv6StaticAddressEntry | 1.3.6.1.4.1.2435.2.4.4.1240.5.15.4.1 | not-accessible | ||
| INT brMultiIFIPv6StaticAddressIndex | 1.3.6.1.4.1.2435.2.4.4.1240.5.15.4.1.1 | INTEGER | read-only | index |
| INT brMultiIFIPv6StaticAddressEnable | 1.3.6.1.4.1.2435.2.4.4.1240.5.15.4.1.2 | INTEGER | read-write | index |
| ADR brMultiIFIPv6StaticAddress | 1.3.6.1.4.1.2435.2.4.4.1240.5.15.4.1.3 | Ipv6Address | read-write | IPv6 Static Address |
| INT brMultiIFIPv6StaticAddressPrefixLength | 1.3.6.1.4.1.2435.2.4.4.1240.5.15.4.1.4 | INTEGER | read-write | IPv6Address Prefix Length |
| brMultiIFDNSIPv6AddressTable | 1.3.6.1.4.1.2435.2.4.4.1240.5.15.5 | not-accessible | ||
| brMultiIFDNSIPv6AddressEntry | 1.3.6.1.4.1.2435.2.4.4.1240.5.15.5.1 | not-accessible | ||
| ADR brMultiIFPrimaryDNSIPv6Address | 1.3.6.1.4.1.2435.2.4.4.1240.5.15.5.1.1 | Ipv6Address | read-write | Primary DNS IPv6 Address |
| ADR brMultiIFSecondaryDNSIPv6Address | 1.3.6.1.4.1.2435.2.4.4.1240.5.15.5.1.2 | Ipv6Address | read-write | Secondary DNS IPv6 Address |
| brMultiIForiginalWebServices | 1.3.6.1.4.1.2435.2.4.4.1240.5.16 | |||
| brMultiIFWebServicesTable | 1.3.6.1.4.1.2435.2.4.4.1240.5.16.1 | not-accessible | ||
| brMultiIFWebServicesEntry | 1.3.6.1.4.1.2435.2.4.4.1240.5.16.1.1 | not-accessible | ||
| STR brMultiIFWebServicesName | 1.3.6.1.4.1.2435.2.4.4.1240.5.16.1.1.1 | DisplayString | read-write | |
| INT brMultiIFWebServicesInstanceID | 1.3.6.1.4.1.2435.2.4.4.1240.5.16.1.1.2 | INTEGER | read-write | |
| INT brMultiIFWebServicesMetadataVersion | 1.3.6.1.4.1.2435.2.4.4.1240.5.16.1.1.3 | INTEGER | read-write |
RFC description
Vendor-private MIB for Brother printer and imaging device management, including status and supplies monitoring.
Start monitoring Brother printer/multifunction devices with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.