BROTHER-MIB :: brLdapEnable

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsBROTHER-MIBbrLdapEnable

brLdapEnable

Module: BROTHER-MIB

OID (symbolic): BROTHER-MIB::brLdapEnable

OID (numeric): 1.3.6.1.4.1.2435.2.4.3.2435.5.19.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: 0 indicates the LDAP client is not enabled. 1 indicates that the LDAP client is enabled. Writing a non-zero value will enable the Ldap if it is supported by the firmware.

What is brLdapEnable?

A read-write switch that turns the device's LDAP client on or off; writing a non-zero value enables LDAP if the firmware supports it.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2435.2.4.3.2435.5.19.2
snmpwalk -v2c -c public <target> BROTHER-MIB::brLdapEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2435.2.4.3.2435.5.19.2.1
snmpget -v2c -c public <target> BROTHER-MIB::brLdapEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2435.2.4.3.2435.5.19.2.1 i <value>

Start monitoring Brother printer/multifunction devices with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BROTHER-MIB::brLdapEnable OID value, configure state conditions and alerts, and monitor any Brother printer/multifunction devices from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2435brotherBROTHER-MIB
1.3.6.1.4.1.2435.2nmBROTHER-MIB
1.3.6.1.4.1.2435.2.4interfaceBROTHER-MIB
1.3.6.1.4.1.2435.2.4.3npCardBROTHER-MIB
1.3.6.1.4.1.2435.2.4.3.2435brnetConfigOptBROTHER-MIB
1.3.6.1.4.1.2435.2.4.3.2435.5broriginalprotocolBROTHER-MIB
1.3.6.1.4.1.2435.2.4.3.2435.5.19broriginalldapBROTHER-MIB
1.3.6.1.4.1.2435.2.4.3.2435.5.19.2brLdapEnableBROTHER-MIB