BROTHER-MIB :: brUPnPEnable

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsBROTHER-MIBbrUPnPEnable

brUPnPEnable

Module: BROTHER-MIB

OID (symbolic): BROTHER-MIB::brUPnPEnable

OID (numeric): 1.3.6.1.4.1.2435.2.4.3.2435.5.11.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: 0 indicates the UPnP protocol is not enabled. 1 indicates that the UPnP protocol is enabled. Writing a non-zero value will enable the UPnP protocol if it is supported by the firmware.

What is brUPnPEnable?

Shows whether UPnP is currently enabled and allows enabling it (if supported by the firmware) by writing a non-zero value.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2435.2.4.3.2435.5.11.2
snmpwalk -v2c -c public <target> BROTHER-MIB::brUPnPEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2435.2.4.3.2435.5.11.2.1
snmpget -v2c -c public <target> BROTHER-MIB::brUPnPEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2435.2.4.3.2435.5.11.2.1 i <value>

Start monitoring Brother printer/multifunction devices with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BROTHER-MIB::brUPnPEnable OID value, configure state conditions and alerts, and monitor any Brother printer/multifunction devices from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2435brotherBROTHER-MIB
1.3.6.1.4.1.2435.2nmBROTHER-MIB
1.3.6.1.4.1.2435.2.4interfaceBROTHER-MIB
1.3.6.1.4.1.2435.2.4.3npCardBROTHER-MIB
1.3.6.1.4.1.2435.2.4.3.2435brnetConfigOptBROTHER-MIB
1.3.6.1.4.1.2435.2.4.3.2435.5broriginalprotocolBROTHER-MIB
1.3.6.1.4.1.2435.2.4.3.2435.5.11broriginalupnpBROTHER-MIB
1.3.6.1.4.1.2435.2.4.3.2435.5.11.2brUPnPEnableBROTHER-MIB