| OID symbolic | OID numeric | Type | Access | Description |
|---|
| bayStackAdacMib | 1.3.6.1.4.1.45.5.9 | | | Avaya Auto-Discovery/Auto-Configuration of Avaya IP
Phones MIB
Copyright 2014 Avaya.
All rights reserved.
This Avaya SNMP Management Information Base Specification
embodies Avaya confidential and proprietary intellectual
property. Avaya retains all title and ownership in
the Specification, including any revisions.
This Specification is supplied 'AS IS,' and Avaya
makes no warranty, either express or implied, as to the use,
operation, condition, or performance of the Specification. |
| bsAdacNotifications | 1.3.6.1.4.1.45.5.9.0 | | | |
| NTF bsAdacPortConfigNotification | 1.3.6.1.4.1.45.5.9.0.1 | | | This notification indicates if the Auto-Configuration
is applied or not on the port. It will be sent on
every status change. |
| NTF bsAdacPortOperDisabledNotification | 1.3.6.1.4.1.45.5.9.0.2 | | | This notification indicates if a port having bsAdacPortAdminEnable set
to true(1) changes its bsAdacPortOperEnable from true(1) to false(2) due
to some condition such as reaching the maximum number of devices supported
per port. |
| bsAdacObjects | 1.3.6.1.4.1.45.5.9.1 | | | |
| bsAdacScalars | 1.3.6.1.4.1.45.5.9.1.1 | | | |
| T/F bsAdacAdminEnable | 1.3.6.1.4.1.45.5.9.1.1.2 | TruthValue | read-write | This object is used to administratively enable or disable ADAC.
A value of true(1) means ADAC should be enabled, while a value
of false(2) means ADAC should be disabled. Note that ADAC might
remain operationally disabled due to other conditions (such as
missing Uplink and Call Server ports). To determine whether
ADAC is operationally enabled, see bsAdacOperEnable. |
| INT bsAdacOperatingMode | 1.3.6.1.4.1.45.5.9.1.1.3 | INTEGER | read-write | This operating mode must be set depending on how the
IP Phones are configured to send frames (tagged/untagged)
and on the desired level of complexity for auto-configuration.
A value of untaggedFramesBasic(1) means that the IP Phones are
configured to send untagged frames and no Voice-VLAN will be
created (only apply QoS).
A value of untaggedFramesAdvanced(2) means that the IP Phones are
configured to send untagged frames and the Voice-VLAN will be
created too, beside applying QoS.
A value of taggedFrames(3) means that the IP Phones are
configured to send tagged frames; the Voice-VLAN will be
created and QoS will be applied accordingly.
This object cannot take the value untaggedFramesAdvanced(2) or
taggedFrames(3) if bsAdacVoiceVlan has the value 0, or if both
bsAdacCallServerPort and bsAdacUplinkPort have the value 0. |
| NUM bsAdacCallServerPort | 1.3.6.1.4.1.45.5.9.1.1.4 | InterfaceIndexOrZero | read-write | The port on which the Call Server is connected. This value
is used only when the current operating mode is either
untaggedFramesAdvanced(2) or taggedFrames(3). It may not
be changed to 0 if the current operating mode is one of
these values.
Note that an implementation should support either
bsAdacCallServerPort and bsAdacUplinkPort, or
bsAdacCallServerPortList and bsAdacUplinkPortList, but not both. |
| NUM bsAdacUplinkPort | 1.3.6.1.4.1.45.5.9.1.1.5 | InterfaceIndexOrZero | read-write | The uplink port is used usually when the Call Server is not
connected directly to the current module/stack. This value
is used only when the current operating mode is either
untaggedFramesAdvanced(2) or taggedFrames(3). It may not
be changed to 0 if the current operating mode is one of
these values.
Note that an implementation should support either
bsAdacCallServerPort and bsAdacUplinkPort, or
bsAdacCallServerPortList and bsAdacUplinkPortList, but not both. |
| VLA bsAdacVoiceVlan | 1.3.6.1.4.1.45.5.9.1.1.6 | VlanIdOrNone | read-write | A value that uniquely identifies the Voice Virtual LAN associated
with ADAC. This value it is used only when the current operating
mode is untaggedFramesAdvanced(2) or taggedFrames(3). It may not
be changed to 0 if the current operating mode is one of these
values. |
| T/F bsAdacNotificationControlEnable | 1.3.6.1.4.1.45.5.9.1.1.7 | TruthValue | read-write | This object controls whether port status changes will result in
generation of a bsAdacPortConfigNotification. The value true(1)
means that the notifications will be generated. The value false(2)
means that they will not be generated. |
| INT bsAdacMacAddrRangeControl | 1.3.6.1.4.1.45.5.9.1.1.8 | INTEGER | read-write | This object always returns none(1) when retrieved. When set to
clearTable(2), it will delete all entries from the
bsAdacMacAddrRangeTable. When set to defaultTable(3), it will
delete all entries from the bsAdacMacAddrRangeTable and replace
them with factory default entries. |
| T/F bsAdacOperEnable | 1.3.6.1.4.1.45.5.9.1.1.9 | TruthValue | read-only | This object indicates whether ADAC is operationally enabled. A
value of true(1) indicates that it is enabled, while a value of
false(2) indicates that it is disabled. Note a value of false(2)
for this object and a value of true(1) for bsAdacAdminEnable
indicates that ADAC is not operational due to some condition such
as missing Uplink and Call Server ports. |
| POR bsAdacCallServerPortList | 1.3.6.1.4.1.45.5.9.1.1.10 | PortList | read-write | The ports on which the Call Server is connected. This value
is used only when the current operating mode is either
untaggedFramesAdvanced(2) or taggedFrames(3). It may not
be changed to an empty set of ports if the current operating
mode is one of these values.
Note that an implementation should support either
bsAdacCallServerPort and bsAdacUplinkPort, or
bsAdacCallServerPortList and bsAdacUplinkPortList, but not both. |
| POR bsAdacUplinkPortList | 1.3.6.1.4.1.45.5.9.1.1.11 | PortList | read-write | The uplink ports are used usually when the Call Server is not
connected directly to the current module/stack. This value
is used only when the current operating mode is either
untaggedFramesAdvanced(2) or taggedFrames(3). It may not
be changed to an empty set of ports if the current operating
mode is one of these values.
Note that an implementation should support either
bsAdacCallServerPort and bsAdacUplinkPort, or
bsAdacCallServerPortList and bsAdacUplinkPortList, but not both. |
| INT bsAdacUplinkType | 1.3.6.1.4.1.45.5.9.1.1.12 | INTEGER | read-write | The ADAC uplink type.
A value of port(1) means that the ADAC uplink is the clasical
port type uplink. bsAdacUplinkPortList will be used to specify
the actual uplink ports list.
A value of spbm(2) means that the uplink is over SPBM.
With this we inform ADAC that instead of a classical uplink-port
it will use an I-SID that will have to be associated by the user
with the ADAC Voice-VLAN. When setting the ADAC uplink over SPBM,
all the currently set uplink ports will be removed. |
| bsAdacPortTable | 1.3.6.1.4.1.45.5.9.1.2 | | not-accessible | A table of objects that display and control the port
attributes of ADAC. |
| bsAdacPortEntry | 1.3.6.1.4.1.45.5.9.1.2.1 | | not-accessible | A set of objects that display and control the port
attributes of ADAC. |
| NUM bsAdacPortIndex | 1.3.6.1.4.1.45.5.9.1.2.1.1 | InterfaceIndex | not-accessible | An index value that uniquely identifies a port.
This value is similar to ifIndex in MIB2. |
| T/F bsAdacPortAdminEnable | 1.3.6.1.4.1.45.5.9.1.2.1.2 | TruthValue | read-write | true (1) Auto-Detection (and implicitly Auto-Configuration)
of Avaya IP Phones is enabled on this interface.
false (2) Auto-Detection (and implicitly Auto-Configuration)
of Avaya IP Phones is disabled on this interface. |
| INT bsAdacPortConfigStatus | 1.3.6.1.4.1.45.5.9.1.2.1.3 | INTEGER | read-only | Describes the Auto-Configuration status for the port.
A value of configApplied(1) means that the ADAC configuration
is applied for this port.
A value of configNotApplied(2) means that the ADAC configuration
is not applied for this port. |
| I32 bsAdacPortTaggedFramesPvid | 1.3.6.1.4.1.45.5.9.1.2.1.4 | Integer32 | read-write | This is the PVID value that Auto-Configuration will try to apply for
ports which have Auto-Detection enabled (bsAdacPortAdminEnable is set
to true(1)), and which are running in Tagged-Frames operational mode
(bsAdacOperatingMode is set to taggedFrames(3)).
A value of 0 means that the Auto-Configuration will not change the
PVID of the respective port.
If the VLAN with the ID equal with this PVID does not exist when
Auto-Configuration is applied to a port, then Auto-Configuration won't
change the port's PVID (it will ignore the current value of this object,
and treat it as if its value is currently 0). |
| INT bsAdacPortTaggedFramesTagging | 1.3.6.1.4.1.45.5.9.1.2.1.5 | INTEGER | read-write | This is the tagging value that Auto-Configuration will apply for
ports which have Auto-Detection enabled (bsAdacPortAdminEnable is
set to true(1)), and which are running in Tagged-Frames operational
mode (bsAdacOperatingMode is set to taggedFrames(3)).
A value of tagAll(1) means that the Telephony ports will have
the tagging enabled on all frames.
A value of tagPvidOnly(2) means that the Telephony ports will have
the tagging enabled on frames matching the PVID of the port.
A value of untagPvidOnly(3) means that the Telephony ports will have
the tagging disabled on frames matching the PVID of the port.
A value of noChange(4) means that the Auto-Configuration will not
change the tagging of the respective port. |
| INT bsAdacPortType | 1.3.6.1.4.1.45.5.9.1.2.1.6 | INTEGER | read-only | Describes how ADAC classifies this port.
A value of telephony(1) means that the Auto-Detection is enabled
for this port (bsAdacPortAdminEnable is set to true(1)).
A value of callServer(2) means that the port is configured as Call Server.
A value of uplink(3) means that the port is either configured as Uplink
or it's part of the same trunk as the current set Uplink port.
A value of other(4) means that the port has none of the types above. |
| T/F bsAdacPortOperEnable | 1.3.6.1.4.1.45.5.9.1.2.1.7 | TruthValue | read-only | This object indicates whether Auto-Detection is operationally enabled on port.
A value of true(1) indicates that it is enabled, while a value of false(2)
indicates that it is disabled.
Note a value of false(2) for this object and a value of true(1) for
bsAdacPortAdminEnable indicates that Auto-Detection (and implicitly
Auto-Configuration) is not operational due to some condition such as
reaching the maximum number of devices supported per port. |
| T/F bsAdacPortMacDetectionEnable | 1.3.6.1.4.1.45.5.9.1.2.1.8 | TruthValue | read-write | true (1) Auto-Detection of Avaya IP Phones based on MAC Address
is enabled on this interface.
false (2) Auto-Detection of Avaya IP Phones based on MAC Address
is disabled on this interface.
It cannot be set to false(2) if no other supported detection
mechanism is enabled on port. |
| T/F bsAdacPortLldpDetectionEnable | 1.3.6.1.4.1.45.5.9.1.2.1.9 | TruthValue | read-write | true (1) Auto-Detection of Avaya IP Phones based on 802.1ab
is enabled on this interface.
false (2) Auto-Detection of Avaya IP Phones based on 802.1ab
is disabled on this interface.
It cannot be set to false(2) if no other supported detection
mechanism is enabled on port. |
| bsAdacMacAddrRangeTable | 1.3.6.1.4.1.45.5.9.1.3 | | not-accessible | A table of objects that display and control the attributes of
the MAC Address ranges supported by ADAC.
Overlapping ranges are not allowed and the attempts to create an
entry that overlaps an existing entry will fail. |
| bsAdacMacAddrRangeEntry | 1.3.6.1.4.1.45.5.9.1.3.1 | | not-accessible | A set of objects that display and control the attributes of
the MAC Address ranges supported by ADAC. |
| MAC bsAdacMacAddrRangeLowEndIndex | 1.3.6.1.4.1.45.5.9.1.3.1.1 | MacAddress | not-accessible | The low end of the MAC Address range. |
| MAC bsAdacMacAddrRangeHighEndIndex | 1.3.6.1.4.1.45.5.9.1.3.1.2 | MacAddress | not-accessible | The high end of the MAC Address range. |
| ROW bsAdacMacAddrRangeRowStatus | 1.3.6.1.4.1.45.5.9.1.3.1.3 | RowStatus | read-create | This is used to control creation/deletion of entries
in this table. |
