All MIBs › BAY-STACK-ADAC-MIB › bsAdacOperatingMode
bsAdacOperatingMode
Module: BAY-STACK-ADAC-MIB
OID (symbolic): BAY-STACK-ADAC-MIB::bsAdacOperatingMode
OID (numeric): 1.3.6.1.4.1.45.5.9.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This operating mode must be set depending on how the IP Phones are configured to send frames (tagged/untagged) and on the desired level of complexity for auto-configuration.
A value of untaggedFramesBasic(1) means that the IP Phones are configured to send untagged frames and no Voice-VLAN will be created (only apply QoS).
A value of untaggedFramesAdvanced(2) means that the IP Phones are configured to send untagged frames and the Voice-VLAN will be created too, beside applying QoS.
A value of taggedFrames(3) means that the IP Phones are configured to send tagged frames; the Voice-VLAN will be created and QoS will be applied accordingly.
This object cannot take the value untaggedFramesAdvanced(2) or taggedFrames(3) if bsAdacVoiceVlan has the value 0, or if both bsAdacCallServerPort and bsAdacUplinkPort have the value 0.
What is bsAdacOperatingMode?
Configures how ADAC handles IP Phone frames, choosing between basic untagged, advanced untagged, or tagged frame modes to match the IP Phones' VLAN tagging configuration. The selected mode also determines the level of auto-configuration complexity applied to detected phone ports.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.45.5.9.1.1.3 snmpwalk -v2c -c public <target> BAY-STACK-ADAC-MIB::bsAdacOperatingMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.45.5.9.1.1.3.1 snmpget -v2c -c public <target> BAY-STACK-ADAC-MIB::bsAdacOperatingMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.45.5.9.1.1.3.1 i <value>
Start monitoring Avaya/Nortel BayStack Ethernet Routing Switch (ERS) (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BAY-STACK-ADAC-MIB::bsAdacOperatingMode OID value, configure state conditions and alerts, and monitor any Avaya/Nortel BayStack Ethernet Routing Switch (ERS) (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.45 | synoptics | SYNOPTICS-ROOT-MIB |
| 1.3.6.1.4.1.45.5 | bayStackMibs | SYNOPTICS-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.45.5.9 | bayStackAdacMib | BAY-STACK-ADAC-MIB |
| 1.3.6.1.4.1.45.5.9.1 | bsAdacObjects | BAY-STACK-ADAC-MIB |
| 1.3.6.1.4.1.45.5.9.1.1 | bsAdacScalars | BAY-STACK-ADAC-MIB |
| 1.3.6.1.4.1.45.5.9.1.1.3 | bsAdacOperatingMode | BAY-STACK-ADAC-MIB |