G3-AVAYA-MIB (page 1 of 2)

All MIBs › G3-AVAYA-MIB

Category: Domain: Telephony/VoIP, Vendor: Avaya

Description: Avaya G3 communications server MIB for managing PBX system status, trunks, and call processing resources.

4,048 OIDs total — showing 1-3,140 (page 1 of 2)

Page 1 of 2 Next »

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is G3-AVAYA-MIB?

G3-AVAYA-MIB is an Avaya enterprise MIB for the Avaya G3 communications server (a legacy Definity/Avaya PBX platform) used to manage telephony call processing infrastructure. It exposes status information about the PBX system, its trunk groups, and call-processing resources. This MIB supports monitoring the hardware/software status of the communications server, such as system-level operational state, trunk availability, and utilization of call processing resources that could indicate capacity exhaustion or hardware faults affecting call handling. No module description was available to confirm specific dependencies, though it likely relies on Avaya's broader telephony MIB conventions. It is deployed in enterprise voice environments running Avaya G3/Definity PBX systems for managing trunk and call resource health. Engineers can download the G3-AVAYA-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in G3-AVAYA-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Avaya G3 communications server
Avaya/Definity PBX

Monitoring Examples

An administrator would monitor trunk group status and call-processing resource utilization to detect when trunks are down or nearing capacity, which would explain call failures or busy signals for end users. Since no sample_objects were provided in the source, specific object and table names are not confirmed and this describes the general monitoring use implied by the short description.

What Can Be Monitored

PBX system status
trunk group availability
call processing resource utilization
system operational state

Imported Objects

From RFC1155-SMI

Counter
Gauge
IpAddress
NetworkAddress
TimeTicks
internet

From RFC1213-MIB

DisplayString

From SNMPv2-SMI

OBJECT-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
directory	1.3.6.1.1
mgmt	1.3.6.1.2
experimental	1.3.6.1.3
private	1.3.6.1.4
enterprises	1.3.6.1.4.1
avaya	1.3.6.1.4.1.6889
products	1.3.6.1.4.1.6889.1
def_products	1.3.6.1.4.1.6889.1.8
g3_products	1.3.6.1.4.1.6889.1.8.1
definity_proxy	1.3.6.1.4.1.6889.1.8.1.40
definity_g3	1.3.6.1.4.1.6889.1.8.1.41
definity_ecs	1.3.6.1.4.1.6889.1.8.1.42
definity_mcu	1.3.6.1.4.1.6889.1.8.1.43
val_board	1.3.6.1.4.1.6889.1.8.1.45
clan_board	1.3.6.1.4.1.6889.1.8.1.46
definity_one	1.3.6.1.4.1.6889.1.8.1.47
definity_ip600	1.3.6.1.4.1.6889.1.8.1.48
avaya_s8700m	1.3.6.1.4.1.6889.1.8.1.49
avaya_s8300	1.3.6.1.4.1.6889.1.8.1.50
avaya_s8700i	1.3.6.1.4.1.6889.1.8.1.51
avaya_s8500	1.3.6.1.4.1.6889.1.8.1.52
crossfire_board	1.3.6.1.4.1.6889.1.8.1.53
blade_server	1.3.6.1.4.1.6889.1.8.1.55
avaya_s8400	1.3.6.1.4.1.6889.1.8.1.56
mibs	1.3.6.1.4.1.6889.2
definity	1.3.6.1.4.1.6889.2.8
g3_mib	1.3.6.1.4.1.6889.2.8.1
g3connect	1.3.6.1.4.1.6889.2.8.1.1
INT g3connectState	1.3.6.1.4.1.6889.2.8.1.1.1	INTEGER	read-write	The current state of the switch connection; this object cat be set to 'off' to disable the connection and can be set to 'init' to re-initialize the connection. It can also be set to 'idle', if the g3connectType is 'dynamic', to put turn off the connection until a request is received.
INT g3connectTimeUp	1.3.6.1.4.1.6889.2.8.1.1.2	INTEGER	read-only	The elapsed time since the connection was established
INT g3connectTimeUnused	1.3.6.1.4.1.6889.2.8.1.1.3	INTEGER	read-only	The elapsed time since the connection was last used
CTR g3connectAttempts	1.3.6.1.4.1.6889.2.8.1.1.4	Counter	read-only	The number of connection attempts
CTR g3connectSuccess	1.3.6.1.4.1.6889.2.8.1.1.5	Counter	read-only	The number of successful connections
CTR g3connectRequests	1.3.6.1.4.1.6889.2.8.1.1.6	Counter	read-only	The number of switch data requests
CTR g3connectResponses	1.3.6.1.4.1.6889.2.8.1.1.7	Counter	read-only	The number of switch data responses
CTR g3connectErrors	1.3.6.1.4.1.6889.2.8.1.1.8	Counter	read-only	The number of switch connection errors
INT g3connectQueued	1.3.6.1.4.1.6889.2.8.1.1.9	INTEGER	read-only	The number switch requests in the input queue
INT g3connectDelay	1.3.6.1.4.1.6889.2.8.1.1.10	INTEGER	read-only	The expected delay in retrieving switch data
INT g3connectAlarmForward	1.3.6.1.4.1.6889.2.8.1.1.11	INTEGER	read-write	This object serves as a flag to indicate if a failure has occured in forwarding alarms received from the switch on to another destination.
INT g3connectTimeReset	1.3.6.1.4.1.6889.2.8.1.1.12	INTEGER	read-write	The elapsed time since the connection counters were last reset. Setting this object to zero will reset the counters.
INT g3connectType	1.3.6.1.4.1.6889.2.8.1.1.13	INTEGER	read-only	The type of the switch connection; it is either 'static' which will stay up continuously or 'dynamic' which will be dropped after the connection is idle for a period of time.
INT g3connectTimeout	1.3.6.1.4.1.6889.2.8.1.1.14	INTEGER	read-only	The number of idle minutes a 'dynamic' connection will stay connected before being dropped. For a 'static' connection this field is not applicable an contains a value of zero
g3vintage	1.3.6.1.4.1.6889.2.8.1.2
INT g3vintageTage	1.3.6.1.4.1.6889.2.8.1.2.1	INTEGER	read-only	The number of timeticks since the vintage data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3vintageTintvl object allows the Network Manager to determine the validity of the vintage data in the cache and to control when the proxy agent extracts the vintage data from the switch.
INT g3vintageTintvl	1.3.6.1.4.1.6889.2.8.1.2.2	INTEGER	read-write	An object containing the interval for which the vintage data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for vintage objects is received by the agent it uses the g3vintageTage and g3vintageTintvl objects to determine whether it should refresh the cached vintage data. If g3vintageTstmp + g3vintageTintvl is less than the current value of the sysUpTime object then the agent refreshes the vintage data cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3vintageTdelay	1.3.6.1.4.1.6889.2.8.1.2.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data
INT g3vintageTretrieve	1.3.6.1.4.1.6889.2.8.1.2.4	INTEGER	read-write	An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
STR g3vintageSpeArelease	1.3.6.1.4.1.6889.2.8.1.2.5	DisplayString	read-only	A DisplayString Object that contains the release number for SPE A.
STR g3vintageSpeBrelease	1.3.6.1.4.1.6889.2.8.1.2.6	DisplayString	read-only	A DisplayString Object that contains the release number for SPE B.
STR g3vintageCurMemory	1.3.6.1.4.1.6889.2.8.1.2.7	DisplayString	read-only	A DisplayString Object that contains the current memory configuration.
STR g3vintageSpeAupID	1.3.6.1.4.1.6889.2.8.1.2.8	DisplayString	read-only	A DisplayString Object that contains the update identifier for SPE A.
STR g3vintageSpeBupID	1.3.6.1.4.1.6889.2.8.1.2.9	DisplayString	read-only	A DisplayString Object that contains the update identifier for SPE B.
STR g3vintageSpeAupState1	1.3.6.1.4.1.6889.2.8.1.2.10	DisplayString	read-only	A DisplayString Object that contains the first part of the update state for SPE A.
STR g3vintageSpeBupState1	1.3.6.1.4.1.6889.2.8.1.2.11	DisplayString	read-only	A DisplayString Object that contains the first part of the update state for SPE B.
STR g3vintageSpeAupState2	1.3.6.1.4.1.6889.2.8.1.2.12	DisplayString	read-only	A DisplayString Object that contains the second part of the update state for SPE A.
STR g3vintageSpeBupState2	1.3.6.1.4.1.6889.2.8.1.2.13	DisplayString	read-only	A DisplayString Object that contains the second part of the update state for SPE B.
STR g3vintageVSPacketBus	1.3.6.1.4.1.6889.2.8.1.2.14	DisplayString	read-only	A DisplayString Object that contains the a flag indicating whether packet bus is available on a G3vs system.
STR g3vintageOfferCategory	1.3.6.1.4.1.6889.2.8.1.2.15	DisplayString	read-only	A DisplayString Object that contains the current Offer Category ('A', 'B', or '?').
STR g3vintageATMPnc	1.3.6.1.4.1.6889.2.8.1.2.16	DisplayString	read-only	A DisplayString Object that contains the current ATM PNC Customer Option ('y', or 'n').
STR g3vintageProductID	1.3.6.1.4.1.6889.2.8.1.2.17	DisplayString	read-only	A DisplayString Object that contains the Product Identification number for the Definity switch.
STR g3vintageOSSNumber1	1.3.6.1.4.1.6889.2.8.1.2.18	DisplayString	read-only	A DisplayString Object that contains the first OSS telephone number.
STR g3vintageAbbAlmRep1	1.3.6.1.4.1.6889.2.8.1.2.19	DisplayString	read-only	A DisplayString Object that contains the Abbreviated Alarm Report for the first OSS Number ('y' or 'n').
STR g3vintageOSSNumber2	1.3.6.1.4.1.6889.2.8.1.2.20	DisplayString	read-only	A DisplayString Object that contains the second OSS telephone number.
STR g3vintageAbbAlmRep2	1.3.6.1.4.1.6889.2.8.1.2.21	DisplayString	read-only	A DisplayString Object that contains the Abbreviated Alarm Report for the second OSS Number ('y' or 'n').
STR g3vintageAOActivate	1.3.6.1.4.1.6889.2.8.1.2.22	DisplayString	read-only	A DisplayString Object that contains Alarm Origination Activation status ('y' or 'n').
STR g3vintageCANotify	1.3.6.1.4.1.6889.2.8.1.2.23	DisplayString	read-only	A DisplayString Object that contains Cleared Alarm Notification status ('y' or 'n').
STR g3vintageResNotify	1.3.6.1.4.1.6889.2.8.1.2.24	DisplayString	read-only	A DisplayString Object that contains Restart Notification status ('y' or 'n').
INT g3vintagePbxID	1.3.6.1.4.1.6889.2.8.1.2.25	INTEGER	read-only	An INTEGER Object containing the Local Node Number for pre R11
STR g3vintageACAFlag	1.3.6.1.4.1.6889.2.8.1.2.26	DisplayString	read-only	A DisplayString Object that contains the current ACA Enabled Option ('y', or 'n').
STR g3vintageIPAddress1	1.3.6.1.4.1.6889.2.8.1.2.27	DisplayString	read-only	An object that contains the first octet of IP address
STR g3vintageIPAddress2	1.3.6.1.4.1.6889.2.8.1.2.28	DisplayString	read-only	An object that contains the second octet of IP address
STR g3vintageIPAddress3	1.3.6.1.4.1.6889.2.8.1.2.29	DisplayString	read-only	An object that contains the third octet of IP address
STR g3vintageIPAddress4	1.3.6.1.4.1.6889.2.8.1.2.30	DisplayString	read-only	An object that contains the fourth octet of IP address
STR g3vintagePortNetSupport	1.3.6.1.4.1.6889.2.8.1.2.31	DisplayString	read-only	An object that contains
STR g3vintageLocalSpareProc	1.3.6.1.4.1.6889.2.8.1.2.32	DisplayString	read-only	An object that contains
STR g3vintagePlatform	1.3.6.1.4.1.6889.2.8.1.2.33	DisplayString	read-only	An object that contains
INT g3vintageLocalNodeNbr	1.3.6.1.4.1.6889.2.8.1.2.34	INTEGER	read-only	An INTEGER Object containing the Local Node Number on R11 and beyond
INT g3vintageIPStaReg	1.3.6.1.4.1.6889.2.8.1.2.35	INTEGER	read-only	An object that contains the number of current registered IP stations on the media server.
INT g3vintageIPStaAvail	1.3.6.1.4.1.6889.2.8.1.2.36	INTEGER	read-only	An object that contains the number of concurrent IP stations still available on the media server.
INT g3vintageIPStaLimit	1.3.6.1.4.1.6889.2.8.1.2.37	INTEGER	read-only	An object that contains the total system limit of concurrent IP stations on the media server.
INT g3vintageIPAttdReg	1.3.6.1.4.1.6889.2.8.1.2.38	INTEGER	read-only	An object that contains the number of current registered IP attendant consoles on the media server.
INT g3vintageIPAttdAvail	1.3.6.1.4.1.6889.2.8.1.2.39	INTEGER	read-only	An object that contains the number of concurrent IP attendant consoles still available on the media server.
INT g3vintageIPAttdLimit	1.3.6.1.4.1.6889.2.8.1.2.40	INTEGER	read-only	An object that contains the total system limit of concurrent IP attendant consoles on the media server.
INT g3vintageRemoteOffReg	1.3.6.1.4.1.6889.2.8.1.2.41	INTEGER	read-only	An object that contains the number of current registered remote office stations on the media server.
INT g3vintageRemoteOffAvail	1.3.6.1.4.1.6889.2.8.1.2.42	INTEGER	read-only	An object that contains the number of concurrent remote office stations still available on the media server.
INT g3vintageRemoteOffLimit	1.3.6.1.4.1.6889.2.8.1.2.43	INTEGER	read-only	An object that contains the total system limit of concurrent remote office stations on the media server.
g3config	1.3.6.1.4.1.6889.2.8.1.3
INT g3configTage	1.3.6.1.4.1.6889.2.8.1.3.1	INTEGER	read-only	The number of timeticks since the configuration data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3configTintvl object allows the Network Manager to determine the validity of the configuration data in the cache and to control when the proxy agent extracts the configuration data from the switch.
INT g3configTintvl	1.3.6.1.4.1.6889.2.8.1.3.2	INTEGER	read-write	An object containing the interval for which the configuration data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for configuration objects is received by the agent it uses the g3configTage and g3configTintvl objects to determine whether it should refresh the cached configTable. If g3configTstmp + g3configTintvl is less than the current value of the sysUpTime object then the agent refreshes the configTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3configTdelay	1.3.6.1.4.1.6889.2.8.1.3.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data
INT g3configTretrieve	1.3.6.1.4.1.6889.2.8.1.3.4	INTEGER	read-write	An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3configTcount	1.3.6.1.4.1.6889.2.8.1.3.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3configTable	1.3.6.1.4.1.6889.2.8.1.3.6		not-accessible	A list of g3config entries.
g3configEntry	1.3.6.1.4.1.6889.2.8.1.3.6.1		not-accessible	A g3config entry containing objects of the g3config information sent by the switch.
STR g3configBoardNum	1.3.6.1.4.1.6889.2.8.1.3.6.1.1	DisplayString	read-only	A DisplayString Object that uniquely identifies a board based on its location in the system. The syntax for the Board Number is as follows: cabinet(01-44):carrier(A-E):slot(01-20).
INT g3configIndex	1.3.6.1.4.1.6889.2.8.1.3.6.1.2	INTEGER	read-only	An INTEGER object containing an index numbering the config entry for the board specified in BoardNum. This object along with BoardNum will serve as the instance identifier for boardEntry.
STR g3configBoardType	1.3.6.1.4.1.6889.2.8.1.3.6.1.3	DisplayString	read-only	A DisplayString Object that contains a text description of the type of board.
STR g3configCode	1.3.6.1.4.1.6889.2.8.1.3.6.1.4	DisplayString	read-only	A DisplayString Object that contains the code that defines the type of board.
STR g3configSuffix	1.3.6.1.4.1.6889.2.8.1.3.6.1.5	DisplayString	read-only	A DisplayString Object that contains the suffix to the code (object configCode) that defines the type of board.
STR g3configVintage	1.3.6.1.4.1.6889.2.8.1.3.6.1.6	DisplayString	read-only	An DisplayString Object that contains the vintage of the board.
STR g3configPort1	1.3.6.1.4.1.6889.2.8.1.3.6.1.7	DisplayString	read-only	A DisplayString Object that specifies the assignment of the port. A string representing an integer identical to the port number indicates that the port is assigned. The string (u) indicates that the port is unassigned. The string (t) indicates that the port is assigned via the TTI feature. A null string indicates that the port does not exist on that board.
STR g3configPort2	1.3.6.1.4.1.6889.2.8.1.3.6.1.8	DisplayString	read-only	See DESCRIPTION of configPort1.
STR g3configPort3	1.3.6.1.4.1.6889.2.8.1.3.6.1.9	DisplayString	read-only	See DESCRIPTION of configPort1.
STR g3configPort4	1.3.6.1.4.1.6889.2.8.1.3.6.1.10	DisplayString	read-only	See DESCRIPTION of configPort1.
STR g3configPort5	1.3.6.1.4.1.6889.2.8.1.3.6.1.11	DisplayString	read-only	See DESCRIPTION of configPort1.
STR g3configPort6	1.3.6.1.4.1.6889.2.8.1.3.6.1.12	DisplayString	read-only	See DESCRIPTION of configPort1.
STR g3configPort7	1.3.6.1.4.1.6889.2.8.1.3.6.1.13	DisplayString	read-only	See DESCRIPTION of configPort1.
STR g3configPort8	1.3.6.1.4.1.6889.2.8.1.3.6.1.14	DisplayString	read-only	See DESCRIPTION of configPort1.
STR g3configPort9	1.3.6.1.4.1.6889.2.8.1.3.6.1.15	DisplayString	read-only	See DESCRIPTION of configPort1.
STR g3configPort10	1.3.6.1.4.1.6889.2.8.1.3.6.1.16	DisplayString	read-only	See DESCRIPTION of configPort1.
STR g3configPort11	1.3.6.1.4.1.6889.2.8.1.3.6.1.17	DisplayString	read-only	See DESCRIPTION of configPort1.
STR g3configPort12	1.3.6.1.4.1.6889.2.8.1.3.6.1.18	DisplayString	read-only	See DESCRIPTION of configPort1.
STR g3configPort13	1.3.6.1.4.1.6889.2.8.1.3.6.1.19	DisplayString	read-only	See DESCRIPTION of configPort1.
STR g3configPort14	1.3.6.1.4.1.6889.2.8.1.3.6.1.20	DisplayString	read-only	See DESCRIPTION of configPort1.
STR g3configPort15	1.3.6.1.4.1.6889.2.8.1.3.6.1.21	DisplayString	read-only	See DESCRIPTION of configPort1.
STR g3configPort16	1.3.6.1.4.1.6889.2.8.1.3.6.1.22	DisplayString	read-only	See DESCRIPTION of configPort1.
STR g3configPort17	1.3.6.1.4.1.6889.2.8.1.3.6.1.23	DisplayString	read-only	See DESCRIPTION of configPort1.
STR g3configPort18	1.3.6.1.4.1.6889.2.8.1.3.6.1.24	DisplayString	read-only	See DESCRIPTION of configPort1.
STR g3configPort19	1.3.6.1.4.1.6889.2.8.1.3.6.1.25	DisplayString	read-only	See DESCRIPTION of configPort1.
STR g3configPort20	1.3.6.1.4.1.6889.2.8.1.3.6.1.26	DisplayString	read-only	See DESCRIPTION of configPort1.
STR g3configPort21	1.3.6.1.4.1.6889.2.8.1.3.6.1.27	DisplayString	read-only	See DESCRIPTION of configPort1.
STR g3configPort22	1.3.6.1.4.1.6889.2.8.1.3.6.1.28	DisplayString	read-only	See DESCRIPTION of configPort1.
STR g3configPort23	1.3.6.1.4.1.6889.2.8.1.3.6.1.29	DisplayString	read-only	See DESCRIPTION of configPort1.
STR g3configPort24	1.3.6.1.4.1.6889.2.8.1.3.6.1.30	DisplayString	read-only	See DESCRIPTION of configPort1.
STR g3configPort25	1.3.6.1.4.1.6889.2.8.1.3.6.1.31	DisplayString	read-only	See DESCRIPTION of configPort1.
STR g3configPort26	1.3.6.1.4.1.6889.2.8.1.3.6.1.32	DisplayString	read-only	See DESCRIPTION of configPort1.
STR g3configPort27	1.3.6.1.4.1.6889.2.8.1.3.6.1.33	DisplayString	read-only	See DESCRIPTION of configPort1.
STR g3configPort28	1.3.6.1.4.1.6889.2.8.1.3.6.1.34	DisplayString	read-only	See DESCRIPTION of configPort1.
STR g3configPort29	1.3.6.1.4.1.6889.2.8.1.3.6.1.35	DisplayString	read-only	See DESCRIPTION of configPort1.
STR g3configPort30	1.3.6.1.4.1.6889.2.8.1.3.6.1.36	DisplayString	read-only	See DESCRIPTION of configPort1.
STR g3configPort31	1.3.6.1.4.1.6889.2.8.1.3.6.1.37	DisplayString	read-only	See DESCRIPTION of configPort1.
STR g3configPort32	1.3.6.1.4.1.6889.2.8.1.3.6.1.38	DisplayString	read-only	See DESCRIPTION of configPort1.
g3alarms	1.3.6.1.4.1.6889.2.8.1.4
INT g3alarmsTage	1.3.6.1.4.1.6889.2.8.1.4.1	INTEGER	read-only	The number of timeticks since the alarm data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3alarmsTintvl object allows the Network Manager to determine the validity of the alarm data in the cache and to control when the proxy agent extracts the alarm data from the switch.
INT g3alarmsTintvl	1.3.6.1.4.1.6889.2.8.1.4.2	INTEGER	read-write	An object containing the interval for which the alarm data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for alarm objects is received by the agent it uses the g3alarmsTage and g3alarmsTintvl objects to determine whether it should refresh the cached alarmsTable. If g3alarmsTstmp + g3alarmsTintvl is less than the current value of the sysUpTime object then the agent refreshes the alarmsTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3alarmsTdelay	1.3.6.1.4.1.6889.2.8.1.4.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data
INT g3alarmsTretrieve	1.3.6.1.4.1.6889.2.8.1.4.4	INTEGER	read-write	An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3alarmsTcount	1.3.6.1.4.1.6889.2.8.1.4.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3alarmsTable	1.3.6.1.4.1.6889.2.8.1.4.6		not-accessible	A list of g3alarms entries.
g3alarmsEntry	1.3.6.1.4.1.6889.2.8.1.4.6.1		not-accessible	A g3alarms entry containing objects of the g3alarms information sent by the switch.
STR g3alarmsPort	1.3.6.1.4.1.6889.2.8.1.4.6.1.1	DisplayString	read-only	A DisplayString Object that uniquely identifies a port based on its location in the system. The syntax for the Port number is as follows: cabinet(01-44):carrier(A-E):slot(01-20):port(01-32). This object along with alIndex will serve as the instance identifier for alarmsEntry.
INT g3alarmsIndex	1.3.6.1.4.1.6889.2.8.1.4.6.1.2	INTEGER	read-only	An INTEGER object containing an index numbering the alarm entry for the port specified in alarmsPort. This object along with alarmsPort will serve as the instance identifier for alarmsEntry.
STR g3alarmsMaintName	1.3.6.1.4.1.6889.2.8.1.4.6.1.3	DisplayString	read-only	A DisplayString Object containing the Maintenance Object Name.
STR g3alarmsOnBrd	1.3.6.1.4.1.6889.2.8.1.4.6.1.4	DisplayString	read-only	A DisplayString Object specifying whether or not the alarm indicates an on board fault.
STR g3alarmsAltName	1.3.6.1.4.1.6889.2.8.1.4.6.1.5	DisplayString	read-only	A DisplayString Object containing the alternate name of the alarmed object. Alternate names can consist of extension numbers, trunk group numbers or other identifying data.
STR g3alarmsAlarmType	1.3.6.1.4.1.6889.2.8.1.4.6.1.6	DisplayString	read-only	A DisplayString Object specifying the alarm type (or severity).
STR g3alarmsSvcState	1.3.6.1.4.1.6889.2.8.1.4.6.1.7	DisplayString	read-only	A DisplayString Object specifying the service state of the alarmed object. Service States can be IN or OUT {any others?}.
STR g3alarmsAck	1.3.6.1.4.1.6889.2.8.1.4.6.1.8	DisplayString	read-only	A DisplayString Object indicating whether or not the alarm has been acknowledged by the alarm receiver.
STR g3alarmsMonthAlrmd	1.3.6.1.4.1.6889.2.8.1.4.6.1.9	DisplayString	read-only	A DisplayString Object containing the month the alarm was created.
STR g3alarmsDayAlrmd	1.3.6.1.4.1.6889.2.8.1.4.6.1.10	DisplayString	read-only	A DisplayString Object containing the day the alarm was created.
STR g3alarmsHourAlrmd	1.3.6.1.4.1.6889.2.8.1.4.6.1.11	DisplayString	read-only	A DisplayString Object containing the hour the alarm was created.
STR g3alarmsMinAlrmd	1.3.6.1.4.1.6889.2.8.1.4.6.1.12	DisplayString	read-only	A DisplayString Object containing the minute the alarm was created.
STR g3alarmsMonthRslvd	1.3.6.1.4.1.6889.2.8.1.4.6.1.13	DisplayString	read-only	A DisplayString Object containing the month the alarm was resolved. This object will always contain the value (00) because this table only contains open alarms. This object is included in the table for future enhancements and for completeness.
STR g3alarmsDayRslvd	1.3.6.1.4.1.6889.2.8.1.4.6.1.14	DisplayString	read-only	A DisplayString Object containing the day the alarm was resolved. This object will always contain the value (00) because this table only contains open alarms. This object is included in the table for future enhancements and for completeness.
STR g3alarmsHourRslvd	1.3.6.1.4.1.6889.2.8.1.4.6.1.15	DisplayString	read-only	A DisplayString Object containing the hour the alarm was resolved. This object will always contain the value (00) because this table only contains open alarms. This object is included in the table for future enhancements and for completeness.
STR g3alarmsMinRslvd	1.3.6.1.4.1.6889.2.8.1.4.6.1.16	DisplayString	read-only	A DisplayString Object containing the minute the alarm was resolved. This object will always contain the value (00) because this table only contains open alarms. This object is included in the table for future enhancements and for completeness.
STR g3alarmsAlarmNumber	1.3.6.1.4.1.6889.2.8.1.4.6.1.17	DisplayString	read-only	A DisplayString Object containing the Alarm Number of the alarm. This is just a place holder for a field populated in alarm traps. Nothing is populated in this field.
STR g3alarmsProductID	1.3.6.1.4.1.6889.2.8.1.4.6.1.18	DisplayString	read-only	A DisplayString Object containing the Product ID of the alarm. This is just a place holder for a field populated in alarm traps. Nothing is populated in this field.
STR g3alarmsAck2	1.3.6.1.4.1.6889.2.8.1.4.6.1.19	DisplayString	read-only	Another DisplayString Object indicating whether or not the alarm has been acknowledged.
g3errors	1.3.6.1.4.1.6889.2.8.1.5
INT g3errorsTage	1.3.6.1.4.1.6889.2.8.1.5.1	INTEGER	read-only	The number of timeticks since the error log was last extracted from the switch by the G3 Proxy Agent. This object along with the g3errorsTintvl object allows the Network Manager to determine the validity of the error log in the cache and to control when the proxy agent extracts the error log data from the switch.
INT g3errorsTintvl	1.3.6.1.4.1.6889.2.8.1.5.2	INTEGER	read-write	An object containing the interval for which the error data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for error objects is received by the agent it uses the g3errorsTage and g3errorsTintvl objects to determine whether it should refresh the cached errorsTable. If g3errorsTstmp + g3errorsTintvl is less than the current value of the sysUpTime object then the agent refreshes the errorsTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3errorsTdelay	1.3.6.1.4.1.6889.2.8.1.5.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data
INT g3errorsTretrieve	1.3.6.1.4.1.6889.2.8.1.5.4	INTEGER	read-write	An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3errorsTcount	1.3.6.1.4.1.6889.2.8.1.5.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3errorsTable	1.3.6.1.4.1.6889.2.8.1.5.6		not-accessible	A list of g3errors entries.
g3errorsEntry	1.3.6.1.4.1.6889.2.8.1.5.6.1		not-accessible	A g3errors entry containing objects of the g3errors information sent by the switch.
STR g3errorsPort	1.3.6.1.4.1.6889.2.8.1.5.6.1.1	DisplayString	read-only	A DisplayString Object that uniquely identifies a port based on its location in the system. The syntax for the Port Location is as follows: cabinet(01-44):carrier(A-E):slot(01-20):port(01-32). This object along with errorsIndex will serve as the instance identifier for errorsEntry.
INT g3errorsIndex	1.3.6.1.4.1.6889.2.8.1.5.6.1.2	INTEGER	read-only	An INTEGER object containing an index numbering the error entry for the port specified in errorsPort. This object along with errorsPort will serve as the instance identifier for errorsEntry.
STR g3errorsMaintName	1.3.6.1.4.1.6889.2.8.1.5.6.1.3	DisplayString	read-only	A DisplayString Object containing the Maintenance Object Name.
STR g3errorsAltName	1.3.6.1.4.1.6889.2.8.1.5.6.1.4	DisplayString	read-only	A DisplayString Object containing the alternate name of the errored object. Alternate names can consist of extension numbers, trunk group numbers or other identifying data.
STR g3errorsErrType	1.3.6.1.4.1.6889.2.8.1.5.6.1.5	DisplayString	read-only	A DisplayString Object containing a specific error type numeric code used to determine the type of error.
STR g3errorsAuxData	1.3.6.1.4.1.6889.2.8.1.5.6.1.6	DisplayString	read-only	A DisplayString Object containing an auxiliary numeric code used with the errType to troubleshoot the problem.
STR g3errorsMonthFirst	1.3.6.1.4.1.6889.2.8.1.5.6.1.7	DisplayString	read-only	A DisplayString Object containing the month that the error first occurred.
STR g3errorsDayFirst	1.3.6.1.4.1.6889.2.8.1.5.6.1.8	DisplayString	read-only	A DisplayString Object containing the day that the error first occurred.
STR g3errorsHourFirst	1.3.6.1.4.1.6889.2.8.1.5.6.1.9	DisplayString	read-only	A DisplayString Object containing the hour that the error first occurred.
STR g3errorsMinFirst	1.3.6.1.4.1.6889.2.8.1.5.6.1.10	DisplayString	read-only	A DisplayString Object containing the minute that the error first occurred.
STR g3errorsMonthLast	1.3.6.1.4.1.6889.2.8.1.5.6.1.11	DisplayString	read-only	A DisplayString Object containing the month that the error last occurred.
STR g3errorsDayLast	1.3.6.1.4.1.6889.2.8.1.5.6.1.12	DisplayString	read-only	A DisplayString Object containing the day that the error last occurred.
STR g3errorsHourLast	1.3.6.1.4.1.6889.2.8.1.5.6.1.13	DisplayString	read-only	A DisplayString Object containing the hour that the error last occurred.
STR g3errorsMinLast	1.3.6.1.4.1.6889.2.8.1.5.6.1.14	DisplayString	read-only	A DisplayString Object containing the minute that the error last occurred.
STR g3errorsErrCnt	1.3.6.1.4.1.6889.2.8.1.5.6.1.15	DisplayString	read-only	A DisplayString Object containing a numeric count of the occurrences of the error.
STR g3errorsErrRt	1.3.6.1.4.1.6889.2.8.1.5.6.1.16	DisplayString	read-only	A DisplayString Object containing the error rate occurrences of the error.
STR g3errorsRtperHr	1.3.6.1.4.1.6889.2.8.1.5.6.1.17	DisplayString	read-only	A DisplayString Object containing the error rate per hour.
STR g3errorsAlSt	1.3.6.1.4.1.6889.2.8.1.5.6.1.18	DisplayString	read-only	A DisplayString Object containing the alarm state of the error.
STR g3errorsAck	1.3.6.1.4.1.6889.2.8.1.5.6.1.19	DisplayString	read-only	A DisplayString Object indicating whether or not the alarm has been acknowledged by the alarm receiver.
g3health	1.3.6.1.4.1.6889.2.8.1.6
INT g3healthTage	1.3.6.1.4.1.6889.2.8.1.6.1	INTEGER	read-only	The number of timeticks since the health data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3healthTintvl object allows the Network Manager to determine the validity of the health data in the cache and to control when the proxy agent extracts the health data from the switch.
INT g3healthTintvl	1.3.6.1.4.1.6889.2.8.1.6.2	INTEGER	read-write	An object containing the interval for which the health data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for health objects is received by the agent it uses the g3healthTage and g3healthTintvl objects to determine whether it should refresh the cached healthTable. If g3healthTstmp + g3healthTintvl is less than the current value of the sysUpTime object then the agent refreshes the healthTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3healthTdelay	1.3.6.1.4.1.6889.2.8.1.6.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data
INT g3healthTretrieve	1.3.6.1.4.1.6889.2.8.1.6.4	INTEGER	read-write	An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3healthMajor	1.3.6.1.4.1.6889.2.8.1.6.5	Gauge	read-only	A Gauge object containing the number of logged major alarms.
GAU g3healthMinor	1.3.6.1.4.1.6889.2.8.1.6.6	Gauge	read-only	A Gauge object containing the number of logged minor alarms.
GAU g3healthWarning	1.3.6.1.4.1.6889.2.8.1.6.7	Gauge	read-only	A Gauge object containing the number of logged warnings.
GAU g3healthTrkBusy	1.3.6.1.4.1.6889.2.8.1.6.8	Gauge	read-only	A Gauge object containing the number of trunks busied out.
GAU g3healthStnBusy	1.3.6.1.4.1.6889.2.8.1.6.9	Gauge	read-only	A Gauge object containing the number of stations busied out.
GAU g3healthOthBusy	1.3.6.1.4.1.6889.2.8.1.6.10	Gauge	read-only	A Gauge object containing the number of objects busied out except trunks and stations.
GAU g3healthStaticOcc	1.3.6.1.4.1.6889.2.8.1.6.11	Gauge	read-only	A Gauge object containing the proportion of the CPU which is currently dedicated to high priority items (e.g. the operating system). This percentage is rounded to the nearest integer, therefore a percentage of 0 means that the occupancy is less than one half of a percent (e.g. an occupancy of 89.6% would be displayed as 90%).
GAU g3healthCallpOcc	1.3.6.1.4.1.6889.2.8.1.6.12	Gauge	read-only	A Gauge object containing the proportion of the CPU which is currently dedicated to call processing. This occupancy has priority over SM and IDLE occupancy categories and if needed, will take processor time away from these occupancy categories. This percentage is rounded to the nearest integer, therefore a percentage of 0 means that the occupancy is less than one half of a percent (e.g. an occupancy of 89.6% would be displayed as 90%).
GAU g3healthSysMgmtOcc	1.3.6.1.4.1.6889.2.8.1.6.13	Gauge	read-only	A Gauge object containing the proportion of the CPU which is currently dedicated to system management or periodic and scheduled maintenance. Therefore, if there is a large amount of periodic or scheduled maintenance testing being performed, this occupancy percentage can be high without affecting service. This percentage is rounded to the nearest integer, therefore a percentage of 0 means that the occupancy is less than one half of a percent (e.g. an occupancy of 89.6% would be displayed as 90%).
GAU g3healthIdleOcc	1.3.6.1.4.1.6889.2.8.1.6.14	Gauge	read-only	A Gauge object containing the proportion of the CPU which is currently available for use. This percentage is rounded to the nearest integer, therefore a percentage of 0 means that the occupancy is less than one half of a percent (e.g. an occupancy of 89.6% would be displayed as 90%).
STR g3healthActiveSPE	1.3.6.1.4.1.6889.2.8.1.6.15	DisplayString	read-only	A DisplayString Object containing the active SPE (A or B) followed by the interchange mode (auto or lock).
STR g3healthActivePNC	1.3.6.1.4.1.6889.2.8.1.6.16	DisplayString	read-only	A DisplayString Object containing the active PNC (A-PNC or B-PNC) followed by the interchange mode (auto or lock).
STR g3healthDupSPE	1.3.6.1.4.1.6889.2.8.1.6.17	DisplayString	read-only	A DisplayString Object containing the duplication status of the SPE (y or n).
STR g3healthDupPNC	1.3.6.1.4.1.6889.2.8.1.6.18	DisplayString	read-only	A DisplayString Object containing the duplication status of the PNC (y or n).
STR g3healthPower	1.3.6.1.4.1.6889.2.8.1.6.19	DisplayString	read-only	A DisplayString Object containing the power source for the SPE (commercial or backup).
STR g3healthTimeSource	1.3.6.1.4.1.6889.2.8.1.6.20	DisplayString	read-only	A DisplayString Object containing the time source for the SPE (external, internal, primary, secondary, or local).
GAU g3healthLogins	1.3.6.1.4.1.6889.2.8.1.6.21	Gauge	read-only	A Gauge object containing the number of active logins.
INT g3healthCab1to151	1.3.6.1.4.1.6889.2.8.1.6.22	INTEGER	read-only	An INTEGER Object containing the number of the cabinet for which health information is being display (first 15)
INT g3healthCab1to152	1.3.6.1.4.1.6889.2.8.1.6.23	INTEGER	read-only	See DESCRIPTION of g3healthCab1to151.
INT g3healthCab1to153	1.3.6.1.4.1.6889.2.8.1.6.24	INTEGER	read-only	See DESCRIPTION of g3healthCab1to151.
INT g3healthCab1to154	1.3.6.1.4.1.6889.2.8.1.6.25	INTEGER	read-only	See DESCRIPTION of g3healthCab1to151.
INT g3healthCab1to155	1.3.6.1.4.1.6889.2.8.1.6.26	INTEGER	read-only	See DESCRIPTION of g3healthCab1to151.
INT g3healthCab1to156	1.3.6.1.4.1.6889.2.8.1.6.27	INTEGER	read-only	See DESCRIPTION of g3healthCab1to151.
INT g3healthCab1to157	1.3.6.1.4.1.6889.2.8.1.6.28	INTEGER	read-only	See DESCRIPTION of g3healthCab1to151.
INT g3healthCab1to158	1.3.6.1.4.1.6889.2.8.1.6.29	INTEGER	read-only	See DESCRIPTION of g3healthCab1to151.
INT g3healthCab1to159	1.3.6.1.4.1.6889.2.8.1.6.30	INTEGER	read-only	See DESCRIPTION of g3healthCab1to151.
INT g3healthCab1to1510	1.3.6.1.4.1.6889.2.8.1.6.31	INTEGER	read-only	See DESCRIPTION of g3healthCab1to151.
INT g3healthCab1to1511	1.3.6.1.4.1.6889.2.8.1.6.32	INTEGER	read-only	See DESCRIPTION of g3healthCab1to151.
INT g3healthCab1to1512	1.3.6.1.4.1.6889.2.8.1.6.33	INTEGER	read-only	See DESCRIPTION of g3healthCab1to151.
INT g3healthCab1to1513	1.3.6.1.4.1.6889.2.8.1.6.34	INTEGER	read-only	See DESCRIPTION of g3healthCab1to151.
INT g3healthCab1to1514	1.3.6.1.4.1.6889.2.8.1.6.35	INTEGER	read-only	See DESCRIPTION of g3healthCab1to151.
INT g3healthCab1to1515	1.3.6.1.4.1.6889.2.8.1.6.36	INTEGER	read-only	See DESCRIPTION of g3healthCab1to151.
STR g3healthPncStat1to151	1.3.6.1.4.1.6889.2.8.1.6.37	DisplayString	read-only	A DisplayString Object containing the status of the PNC that is associated with the previous cabinet (CabX) field (first 15)
STR g3healthPncStat1to152	1.3.6.1.4.1.6889.2.8.1.6.38	DisplayString	read-only	See DESCRIPTION of g3healthPncStat1to151.
STR g3healthPncStat1to153	1.3.6.1.4.1.6889.2.8.1.6.39	DisplayString	read-only	See DESCRIPTION of g3healthPncStat1to151.
STR g3healthPncStat1to154	1.3.6.1.4.1.6889.2.8.1.6.40	DisplayString	read-only	See DESCRIPTION of g3healthPncStat1to151.
STR g3healthPncStat1to155	1.3.6.1.4.1.6889.2.8.1.6.41	DisplayString	read-only	See DESCRIPTION of g3healthPncStat1to151.
STR g3healthPncStat1to156	1.3.6.1.4.1.6889.2.8.1.6.42	DisplayString	read-only	See DESCRIPTION of g3healthPncStat1to151.
STR g3healthPncStat1to157	1.3.6.1.4.1.6889.2.8.1.6.43	DisplayString	read-only	See DESCRIPTION of g3healthPncStat1to151.
STR g3healthPncStat1to158	1.3.6.1.4.1.6889.2.8.1.6.44	DisplayString	read-only	See DESCRIPTION of g3healthPncStat1to151.
STR g3healthPncStat1to159	1.3.6.1.4.1.6889.2.8.1.6.45	DisplayString	read-only	See DESCRIPTION of g3healthPncStat1to151.
STR g3healthPncStat1to1510	1.3.6.1.4.1.6889.2.8.1.6.46	DisplayString	read-only	See DESCRIPTION of g3healthPncStat1to151.
STR g3healthPncStat1to1511	1.3.6.1.4.1.6889.2.8.1.6.47	DisplayString	read-only	See DESCRIPTION of g3healthPncStat1to151.
STR g3healthPncStat1to1512	1.3.6.1.4.1.6889.2.8.1.6.48	DisplayString	read-only	See DESCRIPTION of g3healthPncStat1to151.
STR g3healthPncStat1to1513	1.3.6.1.4.1.6889.2.8.1.6.49	DisplayString	read-only	See DESCRIPTION of g3healthPncStat1to151.
STR g3healthPncStat1to1514	1.3.6.1.4.1.6889.2.8.1.6.50	DisplayString	read-only	See DESCRIPTION of g3healthPncStat1to151.
STR g3healthPncStat1to1515	1.3.6.1.4.1.6889.2.8.1.6.51	DisplayString	read-only	See DESCRIPTION of g3healthPncStat1to151.
INT g3healthCab16to3017	1.3.6.1.4.1.6889.2.8.1.6.52	INTEGER	read-only	An INTEGER Object containing the number of the cabinet for which health information is being display
INT g3healthCab16to3018	1.3.6.1.4.1.6889.2.8.1.6.53	INTEGER	read-only	See DESCRIPTION of g3healthCab16to3017.
INT g3healthCab16to3019	1.3.6.1.4.1.6889.2.8.1.6.54	INTEGER	read-only	See DESCRIPTION of g3healthCab16to3017.
INT g3healthCab16to3020	1.3.6.1.4.1.6889.2.8.1.6.55	INTEGER	read-only	See DESCRIPTION of g3healthCab16to3017.
INT g3healthCab16to3021	1.3.6.1.4.1.6889.2.8.1.6.56	INTEGER	read-only	See DESCRIPTION of g3healthCab16to3017.
INT g3healthCab16to3022	1.3.6.1.4.1.6889.2.8.1.6.57	INTEGER	read-only	See DESCRIPTION of g3healthCab16to3017.
INT g3healthCab16to3023	1.3.6.1.4.1.6889.2.8.1.6.58	INTEGER	read-only	See DESCRIPTION of g3healthCab16to3017.
INT g3healthCab16to3024	1.3.6.1.4.1.6889.2.8.1.6.59	INTEGER	read-only	See DESCRIPTION of g3healthCab16to3017.
INT g3healthCab16to3025	1.3.6.1.4.1.6889.2.8.1.6.60	INTEGER	read-only	See DESCRIPTION of g3healthCab16to3017.
INT g3healthCab16to3026	1.3.6.1.4.1.6889.2.8.1.6.61	INTEGER	read-only	See DESCRIPTION of g3healthCab16to3017.
INT g3healthCab16to3027	1.3.6.1.4.1.6889.2.8.1.6.62	INTEGER	read-only	See DESCRIPTION of g3healthCab16to3017.
INT g3healthCab16to3028	1.3.6.1.4.1.6889.2.8.1.6.63	INTEGER	read-only	See DESCRIPTION of g3healthCab16to3017.
INT g3healthCab16to3029	1.3.6.1.4.1.6889.2.8.1.6.64	INTEGER	read-only	See DESCRIPTION of g3healthCab16to3017.
INT g3healthCab16to3030	1.3.6.1.4.1.6889.2.8.1.6.65	INTEGER	read-only	See DESCRIPTION of g3healthCab16to3017.
INT g3healthCab16to3031	1.3.6.1.4.1.6889.2.8.1.6.66	INTEGER	read-only	See DESCRIPTION of g3healthCab16to3017.
STR g3healthPncStat16to3017	1.3.6.1.4.1.6889.2.8.1.6.67	DisplayString	read-only	A DisplayString Object containing the status of the PNC that is associated with the previous cabinet (CabX) field
STR g3healthPncStat16to3018	1.3.6.1.4.1.6889.2.8.1.6.68	DisplayString	read-only	See DESCRIPTION of g3healthPncStat16to3017.
STR g3healthPncStat16to3019	1.3.6.1.4.1.6889.2.8.1.6.69	DisplayString	read-only	See DESCRIPTION of g3healthPncStat16to3017.
STR g3healthPncStat16to3020	1.3.6.1.4.1.6889.2.8.1.6.70	DisplayString	read-only	See DESCRIPTION of g3healthPncStat16to3017.
STR g3healthPncStat16to3021	1.3.6.1.4.1.6889.2.8.1.6.71	DisplayString	read-only	See DESCRIPTION of g3healthPncStat16to3017.
STR g3healthPncStat16to3022	1.3.6.1.4.1.6889.2.8.1.6.72	DisplayString	read-only	See DESCRIPTION of g3healthPncStat16to3017.
STR g3healthPncStat16to3023	1.3.6.1.4.1.6889.2.8.1.6.73	DisplayString	read-only	See DESCRIPTION of g3healthPncStat16to3017.
STR g3healthPncStat16to3024	1.3.6.1.4.1.6889.2.8.1.6.74	DisplayString	read-only	See DESCRIPTION of g3healthPncStat16to3017.
STR g3healthPncStat16to3025	1.3.6.1.4.1.6889.2.8.1.6.75	DisplayString	read-only	See DESCRIPTION of g3healthPncStat16to3017.
STR g3healthPncStat16to3026	1.3.6.1.4.1.6889.2.8.1.6.76	DisplayString	read-only	See DESCRIPTION of g3healthPncStat16to3017.
STR g3healthPncStat16to3027	1.3.6.1.4.1.6889.2.8.1.6.77	DisplayString	read-only	See DESCRIPTION of g3healthPncStat16to3017.
STR g3healthPncStat16to3028	1.3.6.1.4.1.6889.2.8.1.6.78	DisplayString	read-only	See DESCRIPTION of g3healthPncStat16to3017.
STR g3healthPncStat16to3029	1.3.6.1.4.1.6889.2.8.1.6.79	DisplayString	read-only	See DESCRIPTION of g3healthPncStat16to3017.
STR g3healthPncStat16to3030	1.3.6.1.4.1.6889.2.8.1.6.80	DisplayString	read-only	See DESCRIPTION of g3healthPncStat16to3017.
STR g3healthPncStat16to3031	1.3.6.1.4.1.6889.2.8.1.6.81	DisplayString	read-only	See DESCRIPTION of g3healthPncStat16to3017.
INT g3healthCab31to4417	1.3.6.1.4.1.6889.2.8.1.6.82	INTEGER	read-only	An INTEGER Object containing the number of the cabinet for which health information is being display
INT g3healthCab31to4418	1.3.6.1.4.1.6889.2.8.1.6.83	INTEGER	read-only	See DESCRIPTION of g3healthCab31to4417.
INT g3healthCab31to4419	1.3.6.1.4.1.6889.2.8.1.6.84	INTEGER	read-only	See DESCRIPTION of g3healthCab31to4417.
INT g3healthCab31to4420	1.3.6.1.4.1.6889.2.8.1.6.85	INTEGER	read-only	See DESCRIPTION of g3healthCab31to4417.
INT g3healthCab31to4421	1.3.6.1.4.1.6889.2.8.1.6.86	INTEGER	read-only	See DESCRIPTION of g3healthCab31to4417.
INT g3healthCab31to4422	1.3.6.1.4.1.6889.2.8.1.6.87	INTEGER	read-only	See DESCRIPTION of g3healthCab31to4417.
INT g3healthCab31to4423	1.3.6.1.4.1.6889.2.8.1.6.88	INTEGER	read-only	See DESCRIPTION of g3healthCab31to4417.
INT g3healthCab31to4424	1.3.6.1.4.1.6889.2.8.1.6.89	INTEGER	read-only	See DESCRIPTION of g3healthCab31to4417.
INT g3healthCab31to4425	1.3.6.1.4.1.6889.2.8.1.6.90	INTEGER	read-only	See DESCRIPTION of g3healthCab31to4417.
INT g3healthCab31to4426	1.3.6.1.4.1.6889.2.8.1.6.91	INTEGER	read-only	See DESCRIPTION of g3healthCab31to4417.
INT g3healthCab31to4427	1.3.6.1.4.1.6889.2.8.1.6.92	INTEGER	read-only	See DESCRIPTION of g3healthCab31to4417.
INT g3healthCab31to4428	1.3.6.1.4.1.6889.2.8.1.6.93	INTEGER	read-only	See DESCRIPTION of g3healthCab31to4417.
INT g3healthCab31to4429	1.3.6.1.4.1.6889.2.8.1.6.94	INTEGER	read-only	See DESCRIPTION of g3healthCab31to4417.
INT g3healthCab31to4430	1.3.6.1.4.1.6889.2.8.1.6.95	INTEGER	read-only	See DESCRIPTION of g3healthCab31to4417.
STR g3healthPncStat31to4417	1.3.6.1.4.1.6889.2.8.1.6.96	DisplayString	read-only	A DisplayString Object containing the status of the PNC that is associated with the previous cabinet (CabX) field
STR g3healthPncStat31to4418	1.3.6.1.4.1.6889.2.8.1.6.97	DisplayString	read-only	See DESCRIPTION of g3healthPncStat31to4417.
STR g3healthPncStat31to4419	1.3.6.1.4.1.6889.2.8.1.6.98	DisplayString	read-only	See DESCRIPTION of g3healthPncStat31to4417.
STR g3healthPncStat31to4420	1.3.6.1.4.1.6889.2.8.1.6.99	DisplayString	read-only	See DESCRIPTION of g3healthPncStat31to4417.
STR g3healthPncStat31to4421	1.3.6.1.4.1.6889.2.8.1.6.100	DisplayString	read-only	See DESCRIPTION of g3healthPncStat31to4417.
STR g3healthPncStat31to4422	1.3.6.1.4.1.6889.2.8.1.6.101	DisplayString	read-only	See DESCRIPTION of g3healthPncStat31to4417.
STR g3healthPncStat31to4423	1.3.6.1.4.1.6889.2.8.1.6.102	DisplayString	read-only	See DESCRIPTION of g3healthPncStat31to4417.
STR g3healthPncStat31to4424	1.3.6.1.4.1.6889.2.8.1.6.103	DisplayString	read-only	See DESCRIPTION of g3healthPncStat31to4417.
STR g3healthPncStat31to4425	1.3.6.1.4.1.6889.2.8.1.6.104	DisplayString	read-only	See DESCRIPTION of g3healthPncStat31to4417.
STR g3healthPncStat31to4426	1.3.6.1.4.1.6889.2.8.1.6.105	DisplayString	read-only	See DESCRIPTION of g3healthPncStat31to4417.
STR g3healthPncStat31to4427	1.3.6.1.4.1.6889.2.8.1.6.106	DisplayString	read-only	See DESCRIPTION of g3healthPncStat31to4417.
STR g3healthPncStat31to4428	1.3.6.1.4.1.6889.2.8.1.6.107	DisplayString	read-only	See DESCRIPTION of g3healthPncStat31to4417.
STR g3healthPncStat31to4429	1.3.6.1.4.1.6889.2.8.1.6.108	DisplayString	read-only	See DESCRIPTION of g3healthPncStat31to4417.
STR g3healthPncStat31to4430	1.3.6.1.4.1.6889.2.8.1.6.109	DisplayString	read-only	See DESCRIPTION of g3healthPncStat31to4417.
g3cabinet	1.3.6.1.4.1.6889.2.8.1.7
INT g3cabinetTage	1.3.6.1.4.1.6889.2.8.1.7.1	INTEGER	read-only	The number of timeticks since the cabinet data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3cabinetTintvl object allows the Network Manager to determine the validity of the error log in the cache and to control when the proxy agent extracts the cabinet data from the switch.
INT g3cabinetTintvl	1.3.6.1.4.1.6889.2.8.1.7.2	INTEGER	read-write	An object containing the interval for which the cabinet data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for cabinet objects is received by the agent it uses the g3cabinetTage and g3cabinetTintvl objects to determine whether it should refresh the cached cabinetTable. If g3cabinetTstmp + g3cabinetTintvl is less than the current value of the sysUpTime object then the agent refreshes the cabinetTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3cabinetTdelay	1.3.6.1.4.1.6889.2.8.1.7.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data
INT g3cabinetTretrieve	1.3.6.1.4.1.6889.2.8.1.7.4	INTEGER	read-write	An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3cabinetTcount	1.3.6.1.4.1.6889.2.8.1.7.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3cabinetTable	1.3.6.1.4.1.6889.2.8.1.7.6		not-accessible	A list of g3cabinet entries.
g3cabinetEntry	1.3.6.1.4.1.6889.2.8.1.7.6.1		not-accessible	A g3cabinet entry containing objects of the g3cabinet information sent by the switch.
INT g3cabinetNum	1.3.6.1.4.1.6889.2.8.1.7.6.1.1	INTEGER	read-only	An INTEGER Object that uniquely identifies a cabinet in the system.
STR g3cabinetType	1.3.6.1.4.1.6889.2.8.1.7.6.1.2	DisplayString	read-only	A DisplayString Object containing the type of cabinet (PPN or EPN).
STR g3cabinetLayout	1.3.6.1.4.1.6889.2.8.1.7.6.1.3	DisplayString	read-only	A DisplayString Object containing the cabinet layout.
STR g3cabinetRoom	1.3.6.1.4.1.6889.2.8.1.7.6.1.4	DisplayString	read-only	A DisplayString Object containing the cabinet room number.
STR g3cabinetFloor	1.3.6.1.4.1.6889.2.8.1.7.6.1.5	DisplayString	read-only	A DisplayString Object containing the cabinet floor number.
STR g3cabinetBuilding	1.3.6.1.4.1.6889.2.8.1.7.6.1.6	DisplayString	read-only	A DisplayString Object containing the cabinet building name.
STR g3cabinetCarAType	1.3.6.1.4.1.6889.2.8.1.7.6.1.7	DisplayString	read-only	A DisplayString Object containing the type of carrier A.
INT g3cabinetCarAPNN	1.3.6.1.4.1.6889.2.8.1.7.6.1.8	INTEGER	read-only	An INTEGER Object containing the Port Network Number in carrier A.
STR g3cabinetCarBType	1.3.6.1.4.1.6889.2.8.1.7.6.1.9	DisplayString	read-only	A DisplayString Object containing the type of carrier B.
INT g3cabinetCarBPNN	1.3.6.1.4.1.6889.2.8.1.7.6.1.10	INTEGER	read-only	An INTEGER Object containing the Port Network Number in carrier B.
STR g3cabinetCarCType	1.3.6.1.4.1.6889.2.8.1.7.6.1.11	DisplayString	read-only	A DisplayString Object containing the type of carrier C.
INT g3cabinetCarCPNN	1.3.6.1.4.1.6889.2.8.1.7.6.1.12	INTEGER	read-only	An INTEGER Object containing the Port Network Number in carrier C.
STR g3cabinetCarDType	1.3.6.1.4.1.6889.2.8.1.7.6.1.13	DisplayString	read-only	A DisplayString Object containing the type of carrier D.
INT g3cabinetCarDPNN	1.3.6.1.4.1.6889.2.8.1.7.6.1.14	INTEGER	read-only	An INTEGER Object containing the Port Network Number in carrier D.
STR g3cabinetCarEType	1.3.6.1.4.1.6889.2.8.1.7.6.1.15	DisplayString	read-only	A DisplayString Object containing the type of carrier E.
INT g3cabinetCarEPNN	1.3.6.1.4.1.6889.2.8.1.7.6.1.16	INTEGER	read-only	An INTEGER Object containing the Port Network Number in carrier E.
STR g3cabinetSREPN	1.3.6.1.4.1.6889.2.8.1.7.6.1.17	DisplayString	read-only	A DisplayString Object that states whether the EPN is a survivable remote EPN (y or n).
STR g3cabinetSRProductID	1.3.6.1.4.1.6889.2.8.1.7.6.1.18	DisplayString	read-only	A DisplayString Object containing the product ID of the survivable remote EPN (if the EPN is survivable remote).
STR g3cabinetRack	1.3.6.1.4.1.6889.2.8.1.7.6.1.19	DisplayString	read-only	A DisplayString Object containing the rack-mount location.
STR g3cabinetLocation	1.3.6.1.4.1.6889.2.8.1.7.6.1.20	DisplayString	read-only	A DisplayString Object containing the network location of the cabinet.
g3cabtype	1.3.6.1.4.1.6889.2.8.1.8
INT g3cabtypeTage	1.3.6.1.4.1.6889.2.8.1.8.1	INTEGER	read-only	The number of timeticks since the cabtype data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3cabtypeTintvl object allows the Network Manager to determine the validity of the cabtype data in the cache and to control when the proxy agent extracts the cabtype data from the switch.
INT g3cabtypeTintvl	1.3.6.1.4.1.6889.2.8.1.8.2	INTEGER	read-write	An object containing the interval for which the cabtype data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for cabtype objects is received by the agent it uses the g3cabtypeTage and g3cabtypeTintvl objects to determine whether it should refresh the cached cabtype data. If g3cabtypeTstmp + g3cabtypeTintvl is less than the current value of the sysUpTime object then the agent refreshes the cabtype data cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3cabtypeTdelay	1.3.6.1.4.1.6889.2.8.1.8.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data
INT g3cabtypeTretrieve	1.3.6.1.4.1.6889.2.8.1.8.4	INTEGER	read-write	An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
STR g3cabtypeCab1Type	1.3.6.1.4.1.6889.2.8.1.8.5	DisplayString	read-only	A DisplayString Object containing the type of cabinet 1.
STR g3cabtypeCab2Type	1.3.6.1.4.1.6889.2.8.1.8.6	DisplayString	read-only	A DisplayString Object containing the type of cabinet 2.
STR g3cabtypeCab3Type	1.3.6.1.4.1.6889.2.8.1.8.7	DisplayString	read-only	A DisplayString Object containing the type of cabinet 3.
g3cartype	1.3.6.1.4.1.6889.2.8.1.9
INT g3cartypeTage	1.3.6.1.4.1.6889.2.8.1.9.1	INTEGER	read-only	The number of timeticks since the cartype data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3cartypeTintvl object allows the Network Manager to determine the validity of the cartype data in the cache and to control when the proxy agent extracts the cartype data from the switch.
INT g3cartypeTintvl	1.3.6.1.4.1.6889.2.8.1.9.2	INTEGER	read-write	An object containing the interval for which the cartype data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for cartype objects is received by the agent it uses the g3cartypeTage and g3cartypeTintvl objects to determine whether it should refresh the cached cartype data. If g3cartypeTstmp + g3cartypeTintvl is less than the current value of the sysUpTime object then the agent refreshes the cartype data cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3cartypeTdelay	1.3.6.1.4.1.6889.2.8.1.9.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data
INT g3cartypeTretrieve	1.3.6.1.4.1.6889.2.8.1.9.4	INTEGER	read-write	An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
STR g3cartypeCab1CarAType	1.3.6.1.4.1.6889.2.8.1.9.5	DisplayString	read-only	A DisplayString Object containing the type of cabinet 1/carrier A.
STR g3cartypeCab1CarBType	1.3.6.1.4.1.6889.2.8.1.9.6	DisplayString	read-only	A DisplayString Object containing the type of cabinet 1/carrier B.
STR g3cartypeCab1CarCType	1.3.6.1.4.1.6889.2.8.1.9.7	DisplayString	read-only	A DisplayString Object containing the type of cabinet 1/carrier C.
STR g3cartypeCab1CarDType	1.3.6.1.4.1.6889.2.8.1.9.8	DisplayString	read-only	A DisplayString Object containing the type of cabinet 1/carrier D.
STR g3cartypeCab1CarEType	1.3.6.1.4.1.6889.2.8.1.9.9	DisplayString	read-only	A DisplayString Object containing the type of cabinet 1/carrier E.
STR g3cartypeCab2CarAType	1.3.6.1.4.1.6889.2.8.1.9.10	DisplayString	read-only	A DisplayString Object containing the type of cabinet 2/carrier A.
STR g3cartypeCab2CarBType	1.3.6.1.4.1.6889.2.8.1.9.11	DisplayString	read-only	A DisplayString Object containing the type of cabinet 2/carrier B.
STR g3cartypeCab2CarCType	1.3.6.1.4.1.6889.2.8.1.9.12	DisplayString	read-only	A DisplayString Object containing the type of cabinet 2/carrier C.
STR g3cartypeCab2CarDType	1.3.6.1.4.1.6889.2.8.1.9.13	DisplayString	read-only	A DisplayString Object containing the type of cabinet 2/carrier D.
STR g3cartypeCab2CarEType	1.3.6.1.4.1.6889.2.8.1.9.14	DisplayString	read-only	A DisplayString Object containing the type of cabinet 2/carrier E.
STR g3cartypeCab3CarAType	1.3.6.1.4.1.6889.2.8.1.9.15	DisplayString	read-only	A DisplayString Object containing the type of cabinet 3/carrier A.
STR g3cartypeCab3CarBType	1.3.6.1.4.1.6889.2.8.1.9.16	DisplayString	read-only	A DisplayString Object containing the type of cabinet 3/carrier B.
STR g3cartypeCab3CarCType	1.3.6.1.4.1.6889.2.8.1.9.17	DisplayString	read-only	A DisplayString Object containing the type of cabinet 3/carrier C.
STR g3cartypeCab3CarDType	1.3.6.1.4.1.6889.2.8.1.9.18	DisplayString	read-only	A DisplayString Object containing the type of cabinet 3/carrier D.
STR g3cartypeCab3CarEType	1.3.6.1.4.1.6889.2.8.1.9.19	DisplayString	read-only	A DisplayString Object containing the type of cabinet 3/carrier E.
g3port	1.3.6.1.4.1.6889.2.8.1.10
g3portTable	1.3.6.1.4.1.6889.2.8.1.10.1		not-accessible	A list of g3port entries.
g3portEntry	1.3.6.1.4.1.6889.2.8.1.10.1.1		not-accessible	A g3port entry containing objects of the g3port information sent by the switch.
STR g3portNumber	1.3.6.1.4.1.6889.2.8.1.10.1.1.1	DisplayString	read-only	A DisplayString Object that uniquely identifies a port based on its location in the system. The syntax for the Port Location is as follows: cabinet(01-44):carrier(A-E):slot(01-20):port(01-32). This object will serve as the instance identifier for portEntry.
STR g3portEquipType	1.3.6.1.4.1.6889.2.8.1.10.1.1.2	DisplayString	read-only	A DisplayString Object containing the equipment type for the port.
STR g3portId	1.3.6.1.4.1.6889.2.8.1.10.1.1.3	DisplayString	read-only	A DisplayString Object containing the identifier associated with the equipment type.
STR g3portEquipType2	1.3.6.1.4.1.6889.2.8.1.10.1.1.4	DisplayString	read-only	A DisplayString Object containing the equipment type for a second physical port.
STR g3portId2	1.3.6.1.4.1.6889.2.8.1.10.1.1.5	DisplayString	read-only	A DisplayString Object containing the identifier associated with the equipment type for a second physical port.
g3station	1.3.6.1.4.1.6889.2.8.1.11
g3stationTable	1.3.6.1.4.1.6889.2.8.1.11.1		not-accessible	A list of g3station entries.
g3stationEntry	1.3.6.1.4.1.6889.2.8.1.11.1.1		not-accessible	A g3station entry containing objects of the g3station information sent by the switch.
STR g3stationExtension	1.3.6.1.4.1.6889.2.8.1.11.1.1.1	DisplayString	read-only	A DisplayString Object that uniquely identifies an administered station.
STR g3stationType	1.3.6.1.4.1.6889.2.8.1.11.1.1.2	DisplayString	read-only	A DisplayString Object containing the station type.
STR g3stationName	1.3.6.1.4.1.6889.2.8.1.11.1.1.3	DisplayString	read-only	A DisplayString Object containing the name assigned to the station.
STR g3stationBuilding	1.3.6.1.4.1.6889.2.8.1.11.1.1.4	DisplayString	read-only	A DisplayString Object containing the building location of the station.
STR g3stationFloor	1.3.6.1.4.1.6889.2.8.1.11.1.1.5	DisplayString	read-only	A DisplayString Object containing the floor location of the station.
STR g3stationRoom	1.3.6.1.4.1.6889.2.8.1.11.1.1.6	DisplayString	read-only	A DisplayString Object containing the room location of the station.
STR g3stationCable	1.3.6.1.4.1.6889.2.8.1.11.1.1.7	DisplayString	read-only	A DisplayString Object containing the cable used by the station.
STR g3stationJack	1.3.6.1.4.1.6889.2.8.1.11.1.1.8	DisplayString	read-only	A DisplayString Object containing the jack used by the station.
STR g3stationDataExt	1.3.6.1.4.1.6889.2.8.1.11.1.1.9	DisplayString	read-only	A Display String Object containing the extension of the data module attached to the station.
STR g3stationDataName	1.3.6.1.4.1.6889.2.8.1.11.1.1.10	DisplayString	read-only	A DisplayString Object containing the name assigned to the data module attached to the station.
STR g3stationPort	1.3.6.1.4.1.6889.2.8.1.11.1.1.11	DisplayString	read-only	A DisplayString Object that uniquely identifies the station port based on its location in the system. The syntax for the Port Number is as follows: cabinet(1-22):carrier(A-E):slot(01-20).
g3statsta	1.3.6.1.4.1.6889.2.8.1.12
g3statstaTable	1.3.6.1.4.1.6889.2.8.1.12.1		not-accessible	A list of g3statsta entries.
g3statstaEntry	1.3.6.1.4.1.6889.2.8.1.12.1.1		not-accessible	A g3statsta entry containing objects of the g3statsta information sent by the switch.
STR g3statstaExtension	1.3.6.1.4.1.6889.2.8.1.12.1.1.1	DisplayString	read-only	A DisplayString Object that uniquely identifies an administered station.
STR g3statstaServiceState	1.3.6.1.4.1.6889.2.8.1.12.1.1.2	DisplayString	read-only	A DisplayString Object containing the service state of the station.
STR g3statstaMaintBusy	1.3.6.1.4.1.6889.2.8.1.12.1.1.3	DisplayString	read-only	A DisplayString Object that indicates whether the station has been busied for maintenance.
STR g3statstaConnPort1	1.3.6.1.4.1.6889.2.8.1.12.1.1.4	DisplayString	read-only	A DisplayString Object that contains the first port connected to the station.
STR g3statstaConnPort2	1.3.6.1.4.1.6889.2.8.1.12.1.1.5	DisplayString	read-only	A DisplayString Object that contains the second port connected to the station.
STR g3statstaConnPort3	1.3.6.1.4.1.6889.2.8.1.12.1.1.6	DisplayString	read-only	A DisplayString Object that contains the third port connected to the station.
STR g3statstaConnPort4	1.3.6.1.4.1.6889.2.8.1.12.1.1.7	DisplayString	read-only	A DisplayString Object that contains the fourth port connected to the station.
STR g3statstaConnPort5	1.3.6.1.4.1.6889.2.8.1.12.1.1.8	DisplayString	read-only	A DisplayString Object that contains the fifth port connected to the station.
STR g3statstaConnPort6	1.3.6.1.4.1.6889.2.8.1.12.1.1.9	DisplayString	read-only	A DisplayString Object that contains the sixth port connected to the station.
STR g3statstaSACactive	1.3.6.1.4.1.6889.2.8.1.12.1.1.10	DisplayString	read-only	A DisplayString Object that indicates whether SAC has been activated for the station.
STR g3statstaCFdestExt	1.3.6.1.4.1.6889.2.8.1.12.1.1.11	DisplayString	read-only	A DisplayString Object that contains the CF Destination Extension for the station.
STR g3statstaRingCutOff	1.3.6.1.4.1.6889.2.8.1.12.1.1.12	DisplayString	read-only	A DisplayString Object that indicates whether Ring Cut Off has been activated for the station.
STR g3statstaSerialNbr	1.3.6.1.4.1.6889.2.8.1.12.1.1.13	DisplayString	read-only	A DisplayString Object that contains the serial number for the station.
STR g3statstaPartID	1.3.6.1.4.1.6889.2.8.1.12.1.1.14	DisplayString	read-only	A DisplayString Object that contains the part id for the station.
STR g3statstaSwitchPort	1.3.6.1.4.1.6889.2.8.1.12.1.1.15	DisplayString	read-only	A DisplayString Object that contains the switch port for the station.
STR g3statstaSwitchIPAddr	1.3.6.1.4.1.6889.2.8.1.12.1.1.16	DisplayString	read-only	A DisplayString Object that contains the switch-end IP address for the station.
STR g3statstaSwitchIPPort	1.3.6.1.4.1.6889.2.8.1.12.1.1.17	DisplayString	read-only	A DisplayString Object that contains the switch-end IP port nbr for the station.
STR g3statstaSetIPAddr	1.3.6.1.4.1.6889.2.8.1.12.1.1.18	DisplayString	read-only	A DisplayString Object that contains the set-end IP address for the station.
STR g3statstaSetIPPort	1.3.6.1.4.1.6889.2.8.1.12.1.1.19	DisplayString	read-only	A DisplayString Object that contains the set-end IP port nbr for the station.
g3trunkmem	1.3.6.1.4.1.6889.2.8.1.13
g3trunkmemTable	1.3.6.1.4.1.6889.2.8.1.13.1		not-accessible	A list of g3trunkmem entries.
g3trunkmemEntry	1.3.6.1.4.1.6889.2.8.1.13.1.1		not-accessible	A g3trunkmem entry containing objects of the g3trunkmem information sent by the switch.
INT g3trunkmemGroup	1.3.6.1.4.1.6889.2.8.1.13.1.1.1	INTEGER	read-only	An INTEGER Object that uniquely identifies an administered trunk group.
INT g3trunkmemMember	1.3.6.1.4.1.6889.2.8.1.13.1.1.2	INTEGER	read-only	An INTEGER Object that uniquely identifies a trunk group member.
STR g3trunkmemName	1.3.6.1.4.1.6889.2.8.1.13.1.1.3	DisplayString	read-only	A DisplayString Object containing the name assigned to the trunk group member.
STR g3trunkmemType	1.3.6.1.4.1.6889.2.8.1.13.1.1.4	DisplayString	read-only	A DisplayString Object containing the Type of the trunk group member.
STR g3trunkmemSigGroup	1.3.6.1.4.1.6889.2.8.1.13.1.1.5	DisplayString	read-only	A DisplayString Object containing the Signaling Group assigned to the trunk group member.
STR g3trunkmemPort	1.3.6.1.4.1.6889.2.8.1.13.1.1.6	DisplayString	read-only	A DisplayString Object that uniquely identifies the trunk port based on its location in the system. The syntax for the Port Number is as follows: cabinet(1-22):carrier(A-E):slot(01-20).
g3trunksta	1.3.6.1.4.1.6889.2.8.1.14
g3trunkstaTable	1.3.6.1.4.1.6889.2.8.1.14.1		not-accessible	A list of g3trunksta entries.
g3trunkstaEntry	1.3.6.1.4.1.6889.2.8.1.14.1.1		not-accessible	A g3trunksta entry containing objects of the g3trunksta information sent by the switch.
INT g3trunkstaTrunkGroup	1.3.6.1.4.1.6889.2.8.1.14.1.1.1	INTEGER	read-only	An INTEGER Object that uniquely identifies an administered trunk group.
INT g3trunkstaMember	1.3.6.1.4.1.6889.2.8.1.14.1.1.2	INTEGER	read-only	An INTEGER Object that uniquely identifies a trunk group member.
STR g3trunkstaServiceState	1.3.6.1.4.1.6889.2.8.1.14.1.1.3	DisplayString	read-only	A DisplayString Object containing the service state of the trunk.
STR g3trunkstaMaintBusy	1.3.6.1.4.1.6889.2.8.1.14.1.1.4	DisplayString	read-only	A DisplayString Object that indicates whether the trunk has been busied for maintenance.
STR g3trunkstaConnPort1	1.3.6.1.4.1.6889.2.8.1.14.1.1.5	DisplayString	read-only	A DisplayString Object that contains the first port connected to the trunk.
STR g3trunkstaConnPort2	1.3.6.1.4.1.6889.2.8.1.14.1.1.6	DisplayString	read-only	A DisplayString Object that contains the second port connected to the trunk.
STR g3trunkstaConnPort3	1.3.6.1.4.1.6889.2.8.1.14.1.1.7	DisplayString	read-only	A DisplayString Object that contains the third port connected to the trunk.
STR g3trunkstaConnPort4	1.3.6.1.4.1.6889.2.8.1.14.1.1.8	DisplayString	read-only	A DisplayString Object that contains the fourth port connected to the trunk.
STR g3trunkstaConnPort5	1.3.6.1.4.1.6889.2.8.1.14.1.1.9	DisplayString	read-only	A DisplayString Object that contains the fifth port connected to the trunk.
STR g3trunkstaConnPort6	1.3.6.1.4.1.6889.2.8.1.14.1.1.10	DisplayString	read-only	A DisplayString Object that contains the sixth port connected to the trunk.
STR g3trunkstaConnPort7	1.3.6.1.4.1.6889.2.8.1.14.1.1.11	DisplayString	read-only	A DisplayString Object that contains the seventh port connected to the trunk.
STR g3trunkstaConnPort8	1.3.6.1.4.1.6889.2.8.1.14.1.1.12	DisplayString	read-only	A DisplayString Object that contains the eighth port connected to the trunk.
STR g3trunkstaConnPort9	1.3.6.1.4.1.6889.2.8.1.14.1.1.13	DisplayString	read-only	A DisplayString Object that contains the ninth port connected to the trunk.
g3datamod	1.3.6.1.4.1.6889.2.8.1.15
g3datamodTable	1.3.6.1.4.1.6889.2.8.1.15.1		not-accessible	A list of g3datamod entries.
g3datamodEntry	1.3.6.1.4.1.6889.2.8.1.15.1.1		not-accessible	A g3datamod entry containing objects of the g3datamod information sent by the switch.
STR g3datamodExtension	1.3.6.1.4.1.6889.2.8.1.15.1.1.1	DisplayString	read-only	A DisplayString Object that uniquely identifies an administered data module.
STR g3datamodType	1.3.6.1.4.1.6889.2.8.1.15.1.1.2	DisplayString	read-only	A DisplayString Object containing the data module type.
STR g3datamodName	1.3.6.1.4.1.6889.2.8.1.15.1.1.3	DisplayString	read-only	A DisplayString Object containing the name assigned to the data module.
g3datamsta	1.3.6.1.4.1.6889.2.8.1.16
g3datamstaTable	1.3.6.1.4.1.6889.2.8.1.16.1		not-accessible	A list of g3datamsta entries.
g3datamstaEntry	1.3.6.1.4.1.6889.2.8.1.16.1.1		not-accessible	A g3datamsta entry containing objects of the g3datamsta information sent by the switch.
STR g3datamstaExtension	1.3.6.1.4.1.6889.2.8.1.16.1.1.1	DisplayString	read-only	A DisplayString Object that uniquely identifies an administered data module.
STR g3datamstaServiceState	1.3.6.1.4.1.6889.2.8.1.16.1.1.2	DisplayString	read-only	A DisplayString Object containing the service state of the data module.
STR g3datamstaMaintBusy	1.3.6.1.4.1.6889.2.8.1.16.1.1.3	DisplayString	read-only	A DisplayString Object that indicates whether the data module has been busied for maintenance.
STR g3datamstaConnPort1	1.3.6.1.4.1.6889.2.8.1.16.1.1.4	DisplayString	read-only	A DisplayString Object that contains the first port connected to the data module.
STR g3datamstaConnPort2	1.3.6.1.4.1.6889.2.8.1.16.1.1.5	DisplayString	read-only	A DisplayString Object that contains the second port connected to the data module.
STR g3datamstaConnPort3	1.3.6.1.4.1.6889.2.8.1.16.1.1.6	DisplayString	read-only	A DisplayString Object that contains the third port connected to the data module.
STR g3datamstaConnPort4	1.3.6.1.4.1.6889.2.8.1.16.1.1.7	DisplayString	read-only	A DisplayString Object that contains the fourth port connected to the data module.
STR g3datamstaConnPort5	1.3.6.1.4.1.6889.2.8.1.16.1.1.8	DisplayString	read-only	A DisplayString Object that contains the fifth port connected to the data module.
STR g3datamstaConnPort6	1.3.6.1.4.1.6889.2.8.1.16.1.1.9	DisplayString	read-only	A DisplayString Object that contains the sixth port connected to the data module.
STR g3datamstaConnPort7	1.3.6.1.4.1.6889.2.8.1.16.1.1.10	DisplayString	read-only	A DisplayString Object that contains the seventh port connected to the data module.
STR g3datamstaConnPort8	1.3.6.1.4.1.6889.2.8.1.16.1.1.11	DisplayString	read-only	A DisplayString Object that contains the eighth port connected to the data module.
STR g3datamstaConnPort9	1.3.6.1.4.1.6889.2.8.1.16.1.1.12	DisplayString	read-only	A DisplayString Object that contains the ninth port connected to the data module.
STR g3datamstaCFdestExt	1.3.6.1.4.1.6889.2.8.1.16.1.1.13	DisplayString	read-only	A DisplayString Object that contains the CF Destination Extension for the data module.
g3timedate	1.3.6.1.4.1.6889.2.8.1.18
INT g3timedateDayOfMonth	1.3.6.1.4.1.6889.2.8.1.18.1	INTEGER	read-write	An INTEGER object containing the current system time Day of the Month (1-31).
STR g3timedateMonth	1.3.6.1.4.1.6889.2.8.1.18.2	DisplayString	read-write	A DisplayString Object that contains the name of the Month ('January', 'February', 'March', 'April', 'May', 'June', 'July', 'August', 'September', 'October', 'November', or 'December').
INT g3timedateYear	1.3.6.1.4.1.6889.2.8.1.18.3	INTEGER	read-write	An INTEGER object containing the current system time Year (0000-9999).
STR g3timedateDayOfWeek	1.3.6.1.4.1.6889.2.8.1.18.4	DisplayString	read-write	A DisplayString Object that contains the day of the week ('Monday', 'Tuesday', 'Wednesday', 'Thursday', 'Friday', 'Saturday', or 'Sunday').
INT g3timedateHour	1.3.6.1.4.1.6889.2.8.1.18.5	INTEGER	read-write	An INTEGER object containing the current system time Hour (0-23).
INT g3timedateMinute	1.3.6.1.4.1.6889.2.8.1.18.6	INTEGER	read-write	An INTEGER object containing the current system time Minute (0-59).
INT g3timedateSecond	1.3.6.1.4.1.6889.2.8.1.18.7	INTEGER	read-only	An INTEGER object containing the current system time Second (0-59).
STR g3timedateLastError1	1.3.6.1.4.1.6889.2.8.1.18.8	DisplayString	read-only	A DisplayString Object that contains the last error message encountered when attempting to set the system date/time.
STR g3timedateLastError2	1.3.6.1.4.1.6889.2.8.1.18.9	DisplayString	read-only	See DESCRIPTION of g3timedateLastError1.
STR g3timedateLastError3	1.3.6.1.4.1.6889.2.8.1.18.10	DisplayString	read-only	See DESCRIPTION of g3timedateLastError1.
STR g3timedateLastError4	1.3.6.1.4.1.6889.2.8.1.18.11	DisplayString	read-only	See DESCRIPTION of g3timedateLastError1.
STR g3timedateLastError5	1.3.6.1.4.1.6889.2.8.1.18.12	DisplayString	read-only	See DESCRIPTION of g3timedateLastError1.
STR g3timedateLastError6	1.3.6.1.4.1.6889.2.8.1.18.13	DisplayString	read-only	See DESCRIPTION of g3timedateLastError1.
g3busytrk	1.3.6.1.4.1.6889.2.8.1.19
g3busytrkTable	1.3.6.1.4.1.6889.2.8.1.19.1		not-accessible	A list of g3busytrk entries.
g3busytrkEntry	1.3.6.1.4.1.6889.2.8.1.19.1.1		not-accessible	A g3busytrk entry containing objects of the g3busytrk information sent by the switch.
STR g3busytrkAction	1.3.6.1.4.1.6889.2.8.1.19.1.1.1	DisplayString	read-only	A DisplayString Object that contains the last action performed on the trunk group and trunk member ('busyout' or 'release').
STR g3busytrkObject	1.3.6.1.4.1.6889.2.8.1.19.1.1.2	DisplayString	read-only	A DisplayString Object that contains the switch object 'trunk'.
INT g3busytrkGroup	1.3.6.1.4.1.6889.2.8.1.19.1.1.3	INTEGER	read-only	An INTEGER Object that uniquely identifies an administered trunk group on which a 'busyout' or 'release' operation was last performed.
INT g3busytrkMember	1.3.6.1.4.1.6889.2.8.1.19.1.1.4	INTEGER	read-only	An INTEGER Object that uniquely identifies an administered trunk member on which a 'busyout' or 'release' operation was last performed.
INT g3busytrkIndex	1.3.6.1.4.1.6889.2.8.1.19.1.1.5	INTEGER	read-only	An INTEGER Object that identifies an index number for the trunk group and member number record (currently always set to '1').
STR g3busytrkPort	1.3.6.1.4.1.6889.2.8.1.19.1.1.6	DisplayString	read-only	A DisplayString Object that uniquely identifies a port based on its location in the system. The syntax for the Port Number is as follows: cabinet(01-44):carrier(A-E):slot(01-20):port(01-32).
STR g3busytrkMaintName	1.3.6.1.4.1.6889.2.8.1.19.1.1.7	DisplayString	read-only	A DisplayString Object containing the maintenance object name.
STR g3busytrkAltName	1.3.6.1.4.1.6889.2.8.1.19.1.1.8	DisplayString	read-only	A DisplayString Object containing the alternate name of the object.
STR g3busytrkResult	1.3.6.1.4.1.6889.2.8.1.19.1.1.9	DisplayString	read-only	A DisplayString Object containing the result of the last busyout/release operation.
STR g3busytrkErrorCode	1.3.6.1.4.1.6889.2.8.1.19.1.1.10	DisplayString	read-only	A DisplayString Object containing the error code associated with the result of the last busyout/release operation.
STR g3busytrkLastError	1.3.6.1.4.1.6889.2.8.1.19.1.1.11	DisplayString	read-only	A DisplayString Object that contains the error message encountered on the last busyout/release operation. The string is blank if no command error was encountered on the last attempt.
STR g3busytrkUDateStr	1.3.6.1.4.1.6889.2.8.1.19.1.1.12	DisplayString	read-only	A DisplayString Object that contains the UNIX time stamp when the result of the busyout/release operation was received.
g3busybrd	1.3.6.1.4.1.6889.2.8.1.20
g3busybrdTable	1.3.6.1.4.1.6889.2.8.1.20.1		not-accessible	A list of g3busybrd entries.
g3busybrdEntry	1.3.6.1.4.1.6889.2.8.1.20.1.1		not-accessible	A g3busybrd entry containing objects of the g3busybrd information sent by the switch.
STR g3busybrdAction	1.3.6.1.4.1.6889.2.8.1.20.1.1.1	DisplayString	read-only	A DisplayString Object that contains the last action performed on the board or port on a board ('busyout' or 'release').
STR g3busybrdObject	1.3.6.1.4.1.6889.2.8.1.20.1.1.2	DisplayString	read-only	A DisplayString Object that contains the switch object 'board'.
STR g3busybrdBoardVal	1.3.6.1.4.1.6889.2.8.1.20.1.1.3	DisplayString	read-only	A DisplayString Object that uniquely identifies a board based on its location in the system which a 'busyout' or 'release' operation was last performed. The syntax for the Board Number is as follows: cabinet(01-44):carrier(A-E):slot(01-20).
INT g3busybrdPortVal	1.3.6.1.4.1.6889.2.8.1.20.1.1.4	INTEGER	read-only	An INTEGER Object that uniquely identifies an administered port location on which a 'busyout' or 'release' operation was last performed.
INT g3busybrdIndex	1.3.6.1.4.1.6889.2.8.1.20.1.1.5	INTEGER	read-only	An INTEGER Object that identifies an index number for the board /port number record (currently always set to '1').
STR g3busybrdPort	1.3.6.1.4.1.6889.2.8.1.20.1.1.6	DisplayString	read-only	A DisplayString Object that uniquely identifies a port based on its location in the system. The syntax for the Port Number is as follows: cabinet(01-44):carrier(A-E):slot(01-20):port(01-32).
STR g3busybrdMaintName	1.3.6.1.4.1.6889.2.8.1.20.1.1.7	DisplayString	read-only	A DisplayString Object containing the maintenance object name.
STR g3busybrdAltName	1.3.6.1.4.1.6889.2.8.1.20.1.1.8	DisplayString	read-only	A DisplayString Object containing the alternate name of the object.
STR g3busybrdResult	1.3.6.1.4.1.6889.2.8.1.20.1.1.9	DisplayString	read-only	A DisplayString Object containing the result of the last busyout/release operation.
STR g3busybrdErrorCode	1.3.6.1.4.1.6889.2.8.1.20.1.1.10	DisplayString	read-only	A DisplayString Object containing the error code associated with the result of the last busyout/release operation.
STR g3busybrdLastError	1.3.6.1.4.1.6889.2.8.1.20.1.1.11	DisplayString	read-only	A DisplayString Object that contains the error message encountered on the last busyout/release operation. The string is blank if no command error was encountered on the last attempt.
STR g3busybrdUDateStr	1.3.6.1.4.1.6889.2.8.1.20.1.1.12	DisplayString	read-only	A DisplayString Object that contains the UNIX time stamp when the result of the busyout/release operation was received.
g3servalm	1.3.6.1.4.1.6889.2.8.1.21
g3servalmTable	1.3.6.1.4.1.6889.2.8.1.21.1		not-accessible	A list of g3servalm entries.
g3servalmEntry	1.3.6.1.4.1.6889.2.8.1.21.1.1		not-accessible	A g3servalm entry containing objects of the g3servalm information sent by the switch.
INT g3servalmID	1.3.6.1.4.1.6889.2.8.1.21.1.1.1	INTEGER	read-only	A DisplayString Object that uniquely identifies the server alarm.
STR g3servalmSource	1.3.6.1.4.1.6889.2.8.1.21.1.1.2	DisplayString	read-only	A DisplayString Object containing the source of the alarm.
STR g3servalmEventID	1.3.6.1.4.1.6889.2.8.1.21.1.1.3	DisplayString	read-only	A DisplayString Object containing the event id of the alarm.
STR g3servalmLevel	1.3.6.1.4.1.6889.2.8.1.21.1.1.4	DisplayString	read-only	A DisplayString Object containing the level of the alarm.
STR g3servalmAck	1.3.6.1.4.1.6889.2.8.1.21.1.1.5	DisplayString	read-only	A DisplayString Object containing the alarm acknowledged flag.
STR g3servalmDate	1.3.6.1.4.1.6889.2.8.1.21.1.1.6	DisplayString	read-only	A DisplayString Object containing the date the alarm was generated.
STR g3servalmDescription	1.3.6.1.4.1.6889.2.8.1.21.1.1.7	DisplayString	read-only	A DisplayString Object containing a description of the alarm.
g3msgalm	1.3.6.1.4.1.6889.2.8.1.22
g3msgalmTable	1.3.6.1.4.1.6889.2.8.1.22.1		not-accessible	A list of g3msgalm entries.
g3msgalmEntry	1.3.6.1.4.1.6889.2.8.1.22.1.1		not-accessible	A g3msgalm entry containing objects of the g3msgalm information sent by the switch.
INT g3msgalmID	1.3.6.1.4.1.6889.2.8.1.22.1.1.1	INTEGER	read-only	A DisplayString Object that uniquely identifies the messaging alarm.
STR g3msgalmAPP	1.3.6.1.4.1.6889.2.8.1.22.1.1.2	DisplayString	read-only	A DisplayString Object containing the alarm APP.
STR g3msgalmSource	1.3.6.1.4.1.6889.2.8.1.22.1.1.3	DisplayString	read-only	A DisplayString Object containing the source of the alarm.
STR g3msgalmEventID	1.3.6.1.4.1.6889.2.8.1.22.1.1.4	DisplayString	read-only	A DisplayString Object containing the event id of the alarm.
STR g3msgalmLevel	1.3.6.1.4.1.6889.2.8.1.22.1.1.5	DisplayString	read-only	A DisplayString Object containing the level of the alarm.
STR g3msgalmAck	1.3.6.1.4.1.6889.2.8.1.22.1.1.6	DisplayString	read-only	A DisplayString Object containing the alarm acknowledged flag.
STR g3msgalmLocation	1.3.6.1.4.1.6889.2.8.1.22.1.1.7	DisplayString	read-only	A DisplayString Object containing the location of the alarm.
STR g3msgalmDate	1.3.6.1.4.1.6889.2.8.1.22.1.1.8	DisplayString	read-only	A DisplayString Object containing the date the alarm was generated.
STR g3msgalmDescription	1.3.6.1.4.1.6889.2.8.1.22.1.1.9	DisplayString	read-only	A DisplayString Object containing a description of the alarm.
g3ipevt	1.3.6.1.4.1.6889.2.8.1.23
g3ipevtTable	1.3.6.1.4.1.6889.2.8.1.23.1		not-accessible	A list of g3ipevt entries.
g3ipevtEntry	1.3.6.1.4.1.6889.2.8.1.23.1.1		not-accessible	A g3ipevt entry containing objects of the g3ipevt information sent by the switch.
INT g3ipevtIndex	1.3.6.1.4.1.6889.2.8.1.23.1.1.1	INTEGER	read-only	An INTEGER object containing a unique index for each event in the IP event log for the current day.
STR g3ipevtIPEvent	1.3.6.1.4.1.6889.2.8.1.23.1.1.2	DisplayString	read-only	A DisplayString Object that defines an event in the IP event log for the current day.
g3platcmds	1.3.6.1.4.1.6889.2.8.1.24
g3platcmdsTable	1.3.6.1.4.1.6889.2.8.1.24.1		not-accessible	A list of g3platcmds entries.
g3platcmdsEntry	1.3.6.1.4.1.6889.2.8.1.24.1.1		not-accessible	A g3platcmds entry containing objects of the g3platcmds information sent by the switch.
STR g3platcmdsDate	1.3.6.1.4.1.6889.2.8.1.24.1.1.1	DisplayString	read-only	An object containing the date the command was issued.
STR g3platcmdsTime	1.3.6.1.4.1.6889.2.8.1.24.1.1.2	DisplayString	read-only	An object containing the time that the command was issued.
INT g3platcmdsSeqNumber	1.3.6.1.4.1.6889.2.8.1.24.1.1.3	INTEGER	read-only	An object containing the system-generated sequence number.
STR g3platcmdsPriority	1.3.6.1.4.1.6889.2.8.1.24.1.1.4	DisplayString	read-only	An object containing the session priority.
STR g3platcmdsServerName	1.3.6.1.4.1.6889.2.8.1.24.1.1.5	DisplayString	read-only	An object containing the server name on which the command was issued.
STR g3platcmdsLoginId	1.3.6.1.4.1.6889.2.8.1.24.1.1.6	DisplayString	read-only	An object containing the login id of the user issuing the command.
STR g3platcmdsCommand	1.3.6.1.4.1.6889.2.8.1.24.1.1.7	DisplayString	read-only	An object containing the command issued by the user.
g3ds1cfg	1.3.6.1.4.1.6889.2.8.1.30
INT g3ds1cfgTage	1.3.6.1.4.1.6889.2.8.1.30.1	INTEGER	read-only	The number of timeticks since the ds1 configuration data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3ds1cfgTintvl object allows the Network Manager to determine the validity of the ds1 configuration data in the cache and to control when the proxy agent extracts the ds1 configuration data from the switch.
INT g3ds1cfgTintvl	1.3.6.1.4.1.6889.2.8.1.30.2	INTEGER	read-write	An object containing the interval for which the ds1 configuration data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for ds1 configuration objects is received by the agent it uses the g3ds1cfgTage and g3ds1cfgTintvl objects to determine whether it should refresh the cached ds1cfgTable. If g3ds1cfgTstmp + g3ds1cfgTintvl is less than the current value of the sysUpTime object then the agent refreshes the ds1cfgTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3ds1cfgTdelay	1.3.6.1.4.1.6889.2.8.1.30.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data
INT g3ds1cfgTretrieve	1.3.6.1.4.1.6889.2.8.1.30.4	INTEGER	read-write	An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3ds1cfgTcount	1.3.6.1.4.1.6889.2.8.1.30.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3ds1cfgTable	1.3.6.1.4.1.6889.2.8.1.30.6		not-accessible	A list of g3ds1cfg entries.
g3ds1cfgEntry	1.3.6.1.4.1.6889.2.8.1.30.6.1		not-accessible	A g3ds1cfg entry containing objects of the g3ds1cfg information sent by the switch.
STR g3ds1cfgBoardNum	1.3.6.1.4.1.6889.2.8.1.30.6.1.1	DisplayString	read-only	A DisplayString Object that uniquely identifies a board based on its location in the system. The syntax for the Board Number is as follows: cabinet(01-44):carrier(A-E):slot(01-20).
STR g3ds1cfgCode	1.3.6.1.4.1.6889.2.8.1.30.6.1.2	DisplayString	read-only	A DisplayString Object that contains the code that defines the type of board.
STR g3ds1cfgSuffix	1.3.6.1.4.1.6889.2.8.1.30.6.1.3	DisplayString	read-only	A DisplayString Object that contains the suffix to the code
STR g3ds1cfgVintage	1.3.6.1.4.1.6889.2.8.1.30.6.1.4	DisplayString	read-only	A DisplayString Object that contains the vintage of the board. (object ds1cfgCode) that defines the type of board.
STR g3ds1cfgSignaling	1.3.6.1.4.1.6889.2.8.1.30.6.1.5	DisplayString	read-only	A DisplayString Object that contains the signaling of the board.
STR g3ds1cfgName	1.3.6.1.4.1.6889.2.8.1.30.6.1.6	DisplayString	read-only	A DisplayString Object that contains the name of the board.
STR g3ds1cfgCsuMod	1.3.6.1.4.1.6889.2.8.1.30.6.1.7	DisplayString	read-only	A DisplayString Object that contains the type of CSU Mod.
g3extdev	1.3.6.1.4.1.6889.2.8.1.31
INT g3extdevTage	1.3.6.1.4.1.6889.2.8.1.31.1	INTEGER	read-only	The number of timeticks since the external device data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3extdevintvl object allows the Network Manager to determine the validity of the external device data in the cache and to control when the proxy agent extracts the external device data from the switch.
INT g3extdevTintvl	1.3.6.1.4.1.6889.2.8.1.31.2	INTEGER	read-write	An object containing the interval for which the external device data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for external device objects is received by the agent it uses the g3extdevage and g3extdevintvl objects to determine whether it should refresh the cached extdevTable. If g3extdevstmp + g3extdevintvl is less than the current value of the sysUpTime object then the agent refreshes the extdevTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3extdevTdelay	1.3.6.1.4.1.6889.2.8.1.31.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data
INT g3extdevTretrieve	1.3.6.1.4.1.6889.2.8.1.31.4	INTEGER	read-write	An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3extdevTcount	1.3.6.1.4.1.6889.2.8.1.31.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3extdevTable	1.3.6.1.4.1.6889.2.8.1.31.6		not-accessible	A list of g3extdev entries.
g3extdevEntry	1.3.6.1.4.1.6889.2.8.1.31.6.1		not-accessible	A g3extdev entry containing objects of the g3extdev information sent by the switch.
STR g3extdevPort	1.3.6.1.4.1.6889.2.8.1.31.6.1.1	DisplayString	read-only	A DisplayString Object that uniquely identifies a port based on its location in the system. The syntax for the Port Number is as follows: cabinet(01-44):carrier(A-E):slot(01-20):port(01-32).
STR g3extdevType	1.3.6.1.4.1.6889.2.8.1.31.6.1.2	DisplayString	read-only	A DisplayString Object that defines the type of the device.
STR g3extdevAltName	1.3.6.1.4.1.6889.2.8.1.31.6.1.3	DisplayString	read-only	A DisplayString Object that contains the alternate name for the device.
STR g3extdevDescription	1.3.6.1.4.1.6889.2.8.1.31.6.1.4	DisplayString	read-only	A DisplayString Object that describes the external device.
STR g3extdevID	1.3.6.1.4.1.6889.2.8.1.31.6.1.5	DisplayString	read-only	A DisplayString Object that contains the product identifier of the external device.
STR g3extdevBuilding	1.3.6.1.4.1.6889.2.8.1.31.6.1.6	DisplayString	read-only	A DisplayString Object that contains the building location of the external device.
STR g3extdevAddress	1.3.6.1.4.1.6889.2.8.1.31.6.1.7	DisplayString	read-only	A DisplayString Object that contains the address of the external device.
g3trunkgrp	1.3.6.1.4.1.6889.2.8.1.32
INT g3trunkgrpTage	1.3.6.1.4.1.6889.2.8.1.32.1	INTEGER	read-only	The number of timeticks since the trunk group data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3trunkgrpintvl object allows the Network Manager to determine the validity of the trunk group data in the cache and to control when the proxy agent extracts the trunk group data from the switch.
INT g3trunkgrpTintvl	1.3.6.1.4.1.6889.2.8.1.32.2	INTEGER	read-write	An object containing the interval for which the trunk group data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for trunk group objects is received by the agent it uses the g3trunkgrpage and g3trunkgrpintvl objects to determine whether it should refresh the cached trunkgrpTable. If g3trunkgrpstmp + g3trunkgrpintvl is less than the current value of the sysUpTime object then the agent refreshes the trunkgrpTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3trunkgrpTdelay	1.3.6.1.4.1.6889.2.8.1.32.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data
INT g3trunkgrpTretrieve	1.3.6.1.4.1.6889.2.8.1.32.4	INTEGER	read-write	An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3trunkgrpTcount	1.3.6.1.4.1.6889.2.8.1.32.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3trunkgrpTable	1.3.6.1.4.1.6889.2.8.1.32.6		not-accessible	A list of g3trunkgrp entries.
g3trunkgrpEntry	1.3.6.1.4.1.6889.2.8.1.32.6.1		not-accessible	A g3trunkgrp entry containing objects of the g3trunkgrp information sent by the switch.
INT g3trunkgrpNumber	1.3.6.1.4.1.6889.2.8.1.32.6.1.1	INTEGER	read-only	An INTEGER Object that uniquely identifies an administered trunk group.
STR g3trunkgrpType	1.3.6.1.4.1.6889.2.8.1.32.6.1.2	DisplayString	read-only	A DisplayString Object containing the trunk group type.
STR g3trunkgrpName	1.3.6.1.4.1.6889.2.8.1.32.6.1.3	DisplayString	read-only	A DisplayString Object containing the name assigned to the trunk group.
STR g3trunkgrpDirection	1.3.6.1.4.1.6889.2.8.1.32.6.1.4	DisplayString	read-only	A DisplayString Object containing the trunk group direction.
STR g3trunkgrpServiceType	1.3.6.1.4.1.6889.2.8.1.32.6.1.5	DisplayString	read-only	A DisplayString Object containing the trunk group service type.
STR g3trunkgrpCommType	1.3.6.1.4.1.6889.2.8.1.32.6.1.6	DisplayString	read-only	A DisplayString Object containing the trunk group communications type.
STR g3trunkgrpTrunkType	1.3.6.1.4.1.6889.2.8.1.32.6.1.7	DisplayString	read-only	A DisplayString Object containing the trunk group trunk type.
INT g3trunkgrpSize	1.3.6.1.4.1.6889.2.8.1.32.6.1.8	INTEGER	read-only	An INTEGER Object containing the number of trunk group members.
STR g3trunkgrpUsageAlloc	1.3.6.1.4.1.6889.2.8.1.32.6.1.9	DisplayString	read-only	A DisplayString Object containing a y/n flag for usage allocation.
INT g3trunkgrpTAC	1.3.6.1.4.1.6889.2.8.1.32.6.1.10	INTEGER	read-only	An object containing the Access Code for the trunk group.
STR g3trunkgrpWideSupport	1.3.6.1.4.1.6889.2.8.1.32.6.1.11	DisplayString	read-only	A DisplayString Object containing a wideband support flag.
STR g3trunkgrpDCSFlag	1.3.6.1.4.1.6889.2.8.1.32.6.1.12	DisplayString	read-only	A DisplayString Object containing the flag that shows whether the trunk is used for DCS (y or n).
INT g3trunkgrpPbxID	1.3.6.1.4.1.6889.2.8.1.32.6.1.13	INTEGER	read-only	An INTEGER Object containing the identifier of the PBX.
STR g3trunkgrpDCSSigType	1.3.6.1.4.1.6889.2.8.1.32.6.1.14	DisplayString	read-only	A DisplayString Object containing the DCS signaling type.
STR g3trunkgrpSigType	1.3.6.1.4.1.6889.2.8.1.32.6.1.15	DisplayString	read-only	A DisplayString Object containing the trunk signaling type.
STR g3trunkgrpACAFlag	1.3.6.1.4.1.6889.2.8.1.32.6.1.16	DisplayString	read-only	A DisplayString Object containing the flag that shows whether the trunk is used for ACA (y or n).
INT g3trunkgrpLongHold	1.3.6.1.4.1.6889.2.8.1.32.6.1.17	INTEGER	read-only	An INTEGER Object containing the long holding time in hours.
INT g3trunkgrpShortHold	1.3.6.1.4.1.6889.2.8.1.32.6.1.18	INTEGER	read-only	An INTEGER Object containing the short holding time in seconds.
INT g3trunkgrpShortThreshold	1.3.6.1.4.1.6889.2.8.1.32.6.1.19	INTEGER	read-only	An INTEGER Object containing the short hold time threshold.
STR g3trunkgrpQsigValueAdd	1.3.6.1.4.1.6889.2.8.1.32.6.1.20	DisplayString	read-only	A DisplayString Object containing a flag that indicates whether or not QSIG Value-Added is in use (y or n).
STR g3trunkgrpSuppServProt	1.3.6.1.4.1.6889.2.8.1.32.6.1.21	DisplayString	read-only	A DisplayString Object specifying which supplementary server protocol is being used (can have a value of a-g).
g3bulletin	1.3.6.1.4.1.6889.2.8.1.33
INT g3bulletinTage	1.3.6.1.4.1.6889.2.8.1.33.1	INTEGER	read-only	The number of timeticks since the bulletin board data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3bulletinintvl object allows the Network Manager to determine the validity of the bulletin board data in the cache and to control when the proxy agent extracts the bulletin board data from the switch.
INT g3bulletinTintvl	1.3.6.1.4.1.6889.2.8.1.33.2	INTEGER	read-write	An object containing the interval for which the bulletin board data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for bulletin board objects is received by the agent it uses the g3bulletinage and g3bulletinintvl objects to determine whether it should refresh the cached bulletinTable. If g3bulletinstmp + g3bulletinintvl is less than the current value of the sysUpTime object then the agent refreshes the bulletinTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3bulletinTdelay	1.3.6.1.4.1.6889.2.8.1.33.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data
INT g3bulletinTretrieve	1.3.6.1.4.1.6889.2.8.1.33.4	INTEGER	read-write	An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
STR g3bulletinMessage1	1.3.6.1.4.1.6889.2.8.1.33.5	DisplayString	read-only	A DisplayString Object containing a bulletin board message. A message posted to the bulletin board can consist of one or more Message fields entered by the user. The Message fields can contain any character string that the user can enter on the keyboard. The Message field can also be blank.
STR g3bulletinMessage2	1.3.6.1.4.1.6889.2.8.1.33.6	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage3	1.3.6.1.4.1.6889.2.8.1.33.7	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage4	1.3.6.1.4.1.6889.2.8.1.33.8	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage5	1.3.6.1.4.1.6889.2.8.1.33.9	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage6	1.3.6.1.4.1.6889.2.8.1.33.10	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage7	1.3.6.1.4.1.6889.2.8.1.33.11	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage8	1.3.6.1.4.1.6889.2.8.1.33.12	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage9	1.3.6.1.4.1.6889.2.8.1.33.13	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage10	1.3.6.1.4.1.6889.2.8.1.33.14	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage11	1.3.6.1.4.1.6889.2.8.1.33.15	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage12	1.3.6.1.4.1.6889.2.8.1.33.16	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage13	1.3.6.1.4.1.6889.2.8.1.33.17	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage14	1.3.6.1.4.1.6889.2.8.1.33.18	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage15	1.3.6.1.4.1.6889.2.8.1.33.19	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage16	1.3.6.1.4.1.6889.2.8.1.33.20	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage17	1.3.6.1.4.1.6889.2.8.1.33.21	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage18	1.3.6.1.4.1.6889.2.8.1.33.22	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage19	1.3.6.1.4.1.6889.2.8.1.33.23	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage20	1.3.6.1.4.1.6889.2.8.1.33.24	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage21	1.3.6.1.4.1.6889.2.8.1.33.25	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage22	1.3.6.1.4.1.6889.2.8.1.33.26	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage23	1.3.6.1.4.1.6889.2.8.1.33.27	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage24	1.3.6.1.4.1.6889.2.8.1.33.28	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage25	1.3.6.1.4.1.6889.2.8.1.33.29	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage26	1.3.6.1.4.1.6889.2.8.1.33.30	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage27	1.3.6.1.4.1.6889.2.8.1.33.31	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage28	1.3.6.1.4.1.6889.2.8.1.33.32	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage29	1.3.6.1.4.1.6889.2.8.1.33.33	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage30	1.3.6.1.4.1.6889.2.8.1.33.34	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage31	1.3.6.1.4.1.6889.2.8.1.33.35	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage32	1.3.6.1.4.1.6889.2.8.1.33.36	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage33	1.3.6.1.4.1.6889.2.8.1.33.37	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage34	1.3.6.1.4.1.6889.2.8.1.33.38	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage35	1.3.6.1.4.1.6889.2.8.1.33.39	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage36	1.3.6.1.4.1.6889.2.8.1.33.40	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage37	1.3.6.1.4.1.6889.2.8.1.33.41	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage38	1.3.6.1.4.1.6889.2.8.1.33.42	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage39	1.3.6.1.4.1.6889.2.8.1.33.43	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage40	1.3.6.1.4.1.6889.2.8.1.33.44	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage41	1.3.6.1.4.1.6889.2.8.1.33.45	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage42	1.3.6.1.4.1.6889.2.8.1.33.46	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage43	1.3.6.1.4.1.6889.2.8.1.33.47	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage44	1.3.6.1.4.1.6889.2.8.1.33.48	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage45	1.3.6.1.4.1.6889.2.8.1.33.49	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage46	1.3.6.1.4.1.6889.2.8.1.33.50	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage47	1.3.6.1.4.1.6889.2.8.1.33.51	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage48	1.3.6.1.4.1.6889.2.8.1.33.52	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage49	1.3.6.1.4.1.6889.2.8.1.33.53	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage50	1.3.6.1.4.1.6889.2.8.1.33.54	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage51	1.3.6.1.4.1.6889.2.8.1.33.55	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage52	1.3.6.1.4.1.6889.2.8.1.33.56	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage53	1.3.6.1.4.1.6889.2.8.1.33.57	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage54	1.3.6.1.4.1.6889.2.8.1.33.58	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage55	1.3.6.1.4.1.6889.2.8.1.33.59	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage56	1.3.6.1.4.1.6889.2.8.1.33.60	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage57	1.3.6.1.4.1.6889.2.8.1.33.61	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage58	1.3.6.1.4.1.6889.2.8.1.33.62	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinMessage59	1.3.6.1.4.1.6889.2.8.1.33.63	DisplayString	read-only	See DESCRIPTION of g3bulletinMessage1.
STR g3bulletinDate1	1.3.6.1.4.1.6889.2.8.1.33.64	DisplayString	read-only	A DisplayString Object containing a bulletin board Date. Each Date field is associated with a Message field. If the associated Message field is not blank, the Date field identifies the date on which the bulletin board message was posted. If the associated Message field is blank, then the Date field will be blank.
STR g3bulletinDate2	1.3.6.1.4.1.6889.2.8.1.33.65	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate3	1.3.6.1.4.1.6889.2.8.1.33.66	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate4	1.3.6.1.4.1.6889.2.8.1.33.67	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate5	1.3.6.1.4.1.6889.2.8.1.33.68	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate6	1.3.6.1.4.1.6889.2.8.1.33.69	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate7	1.3.6.1.4.1.6889.2.8.1.33.70	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate8	1.3.6.1.4.1.6889.2.8.1.33.71	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate9	1.3.6.1.4.1.6889.2.8.1.33.72	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate10	1.3.6.1.4.1.6889.2.8.1.33.73	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate11	1.3.6.1.4.1.6889.2.8.1.33.74	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate12	1.3.6.1.4.1.6889.2.8.1.33.75	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate13	1.3.6.1.4.1.6889.2.8.1.33.76	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate14	1.3.6.1.4.1.6889.2.8.1.33.77	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate15	1.3.6.1.4.1.6889.2.8.1.33.78	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate16	1.3.6.1.4.1.6889.2.8.1.33.79	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate17	1.3.6.1.4.1.6889.2.8.1.33.80	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate18	1.3.6.1.4.1.6889.2.8.1.33.81	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate19	1.3.6.1.4.1.6889.2.8.1.33.82	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate20	1.3.6.1.4.1.6889.2.8.1.33.83	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate21	1.3.6.1.4.1.6889.2.8.1.33.84	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate22	1.3.6.1.4.1.6889.2.8.1.33.85	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate23	1.3.6.1.4.1.6889.2.8.1.33.86	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate24	1.3.6.1.4.1.6889.2.8.1.33.87	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate25	1.3.6.1.4.1.6889.2.8.1.33.88	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate26	1.3.6.1.4.1.6889.2.8.1.33.89	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate27	1.3.6.1.4.1.6889.2.8.1.33.90	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate28	1.3.6.1.4.1.6889.2.8.1.33.91	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate29	1.3.6.1.4.1.6889.2.8.1.33.92	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate30	1.3.6.1.4.1.6889.2.8.1.33.93	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate31	1.3.6.1.4.1.6889.2.8.1.33.94	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate32	1.3.6.1.4.1.6889.2.8.1.33.95	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate33	1.3.6.1.4.1.6889.2.8.1.33.96	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate34	1.3.6.1.4.1.6889.2.8.1.33.97	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate35	1.3.6.1.4.1.6889.2.8.1.33.98	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate36	1.3.6.1.4.1.6889.2.8.1.33.99	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate37	1.3.6.1.4.1.6889.2.8.1.33.100	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate38	1.3.6.1.4.1.6889.2.8.1.33.101	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate39	1.3.6.1.4.1.6889.2.8.1.33.102	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate40	1.3.6.1.4.1.6889.2.8.1.33.103	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate41	1.3.6.1.4.1.6889.2.8.1.33.104	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate42	1.3.6.1.4.1.6889.2.8.1.33.105	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate43	1.3.6.1.4.1.6889.2.8.1.33.106	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate44	1.3.6.1.4.1.6889.2.8.1.33.107	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate45	1.3.6.1.4.1.6889.2.8.1.33.108	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate46	1.3.6.1.4.1.6889.2.8.1.33.109	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate47	1.3.6.1.4.1.6889.2.8.1.33.110	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate48	1.3.6.1.4.1.6889.2.8.1.33.111	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate49	1.3.6.1.4.1.6889.2.8.1.33.112	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate50	1.3.6.1.4.1.6889.2.8.1.33.113	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate51	1.3.6.1.4.1.6889.2.8.1.33.114	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate52	1.3.6.1.4.1.6889.2.8.1.33.115	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate53	1.3.6.1.4.1.6889.2.8.1.33.116	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate54	1.3.6.1.4.1.6889.2.8.1.33.117	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate55	1.3.6.1.4.1.6889.2.8.1.33.118	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate56	1.3.6.1.4.1.6889.2.8.1.33.119	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate57	1.3.6.1.4.1.6889.2.8.1.33.120	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate58	1.3.6.1.4.1.6889.2.8.1.33.121	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
STR g3bulletinDate59	1.3.6.1.4.1.6889.2.8.1.33.122	DisplayString	read-only	See DESCRIPTION of g3bulletinDate1.
g3ds1	1.3.6.1.4.1.6889.2.8.1.34
INT g3ds1Tage	1.3.6.1.4.1.6889.2.8.1.34.1	INTEGER	read-only	The number of timeticks since the ds1 data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3ds1intvl object allows the Network Manager to determine the validity of the ds1 data in the cache and to control when the proxy agent extracts the ds1 data from the switch.
INT g3ds1Tintvl	1.3.6.1.4.1.6889.2.8.1.34.2	INTEGER	read-write	An object containing the interval for which the ds1 data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for ds1 objects is received by the agent it uses the g3ds1age and g3ds1intvl objects to determine whether it should refresh the cached ds1Table. If g3ds1stmp + g3ds1intvl is less than the current value of the sysUpTime object then the agent refreshes the ds1Table cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3ds1Tdelay	1.3.6.1.4.1.6889.2.8.1.34.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data
INT g3ds1Tretrieve	1.3.6.1.4.1.6889.2.8.1.34.4	INTEGER	read-write	An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3ds1Tcount	1.3.6.1.4.1.6889.2.8.1.34.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3ds1Table	1.3.6.1.4.1.6889.2.8.1.34.6		not-accessible	A list of g3ds1 entries.
g3ds1Entry	1.3.6.1.4.1.6889.2.8.1.34.6.1		not-accessible	A g3ds1 entry containing objects of the g3ds1 information sent by the switch.
STR g3ds1Location	1.3.6.1.4.1.6889.2.8.1.34.6.1.1	DisplayString	read-only	A DisplayString Object that uniquely identifies a DS1 port board based on its location in the system. The syntax for the Port Location is as follows: cabinet(01-44):carrier(A-E):slot(01-20).
STR g3ds1BitRate	1.3.6.1.4.1.6889.2.8.1.34.6.1.2	DisplayString	read-only	A DisplayString Object containing the Bit Rate for the DS1 board.
STR g3ds1Signaling	1.3.6.1.4.1.6889.2.8.1.34.6.1.3	DisplayString	read-only	A DisplayString Object that contains the signaling of the board
STR g3ds1Name	1.3.6.1.4.1.6889.2.8.1.34.6.1.4	DisplayString	read-only	A DisplayString Object that contains the name of the board
g3atmpnc	1.3.6.1.4.1.6889.2.8.1.35
INT g3atmpncTage	1.3.6.1.4.1.6889.2.8.1.35.1	INTEGER	read-only	The number of timeticks since the ATM PNC data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3atmpncintvl object allows the Network Manager to determine the validity of the ATM PNC data in the cache and to control when the proxy agent extracts the ATM PNC data from the switch.
INT g3atmpncTintvl	1.3.6.1.4.1.6889.2.8.1.35.2	INTEGER	read-write	An object containing the interval for which the ATM PNC group data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for ATM PNC objects is received by the agent it uses the g3atmpncage and g3atmpncintvl objects to determine whether it should refresh the cached atmpncTable. If g3atmpncage + g3atmpncintvl is less than the current value of the sysUpTime object then the agent refreshes the atmpncTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3atmpncTdelay	1.3.6.1.4.1.6889.2.8.1.35.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data
INT g3atmpncTretrieve	1.3.6.1.4.1.6889.2.8.1.35.4	INTEGER	read-write	An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3atmpncTcount	1.3.6.1.4.1.6889.2.8.1.35.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3atmpncTable	1.3.6.1.4.1.6889.2.8.1.35.6		not-accessible	A list of g3atmpnc entries.
g3atmpncEntry	1.3.6.1.4.1.6889.2.8.1.35.6.1		not-accessible	A g3atmpnc entry containing objects of the g3atmpnc information sent by the switch.
INT g3atmpncconnection	1.3.6.1.4.1.6889.2.8.1.35.6.1.1	INTEGER	read-only	An INTEGER Object that uniquely identifies an administered ATM PNC connection.
STR g3atmpncPncLocA	1.3.6.1.4.1.6889.2.8.1.35.6.1.2	DisplayString	read-only	An DisplayString Object that contains the ATM PNC location A port network location (exp 02A24).
STR g3atmpncPncNameA	1.3.6.1.4.1.6889.2.8.1.35.6.1.3	DisplayString	read-only	An DisplayString Object that contains the name of the ATM PNC location A name (15 alphanumeric characters).
STR g3atmpncPncAddFmtA	1.3.6.1.4.1.6889.2.8.1.35.6.1.4	DisplayString	read-only	An DisplayString Object that contains the address format of the ATM PNC location A (DCC ATM, E.164 ATM Private, or ICD ATM).
STR g3atmpncPncAFIA	1.3.6.1.4.1.6889.2.8.1.35.6.1.5	DisplayString	read-only	An DisplayString Object that contains the AFI value of the ATM PNC location A AFI field (39 for DCC, 45 for E.164 ATM Private, or 47 for ICD ATM).
STR g3atmpncPncE164A	1.3.6.1.4.1.6889.2.8.1.35.6.1.6	DisplayString	read-only	An DisplayString Object that contains the hexidecimal value of the ATM PNC location A E.164 field (16 hexidecimal digits).
STR g3atmpncPncDCIA	1.3.6.1.4.1.6889.2.8.1.35.6.1.7	DisplayString	read-only	An DisplayString Object that contains the hexidecimal value of the ATM PNC location A DCC/ICD field (4 hexidecimal digits).
STR g3atmpncPncHoDsp1A	1.3.6.1.4.1.6889.2.8.1.35.6.1.8	DisplayString	read-only	An DisplayString Object that contains the hexidecimal value of the ATM PNC location A HO-DSP1 field (8 hexidecimal digits).
STR g3atmpncPncHoDsp2A	1.3.6.1.4.1.6889.2.8.1.35.6.1.9	DisplayString	read-only	An DisplayString Object that contains the hexidecimal value of the ATM PNC location A HO-DSP2 field (20 hexidecimal digits).
STR g3atmpncPncESIA	1.3.6.1.4.1.6889.2.8.1.35.6.1.10	DisplayString	read-only	An DisplayString Object that contains the hexidecimal value of the ATM PNC location A ESI field (12 hexidecimal digits).
STR g3atmpncPncSELA	1.3.6.1.4.1.6889.2.8.1.35.6.1.11	DisplayString	read-only	An DisplayString Object that contains the hexidecimal value of the ATM PNC location A SEL field (2 hexidecimal digits).
STR g3atmpncPncLocB	1.3.6.1.4.1.6889.2.8.1.35.6.1.12	DisplayString	read-only	An DisplayString Object that contains the ATM PNC location B port network location (exp 03A24).
STR g3atmpncPncNameB	1.3.6.1.4.1.6889.2.8.1.35.6.1.13	DisplayString	read-only	An DisplayString Object that contains the name of the ATM PNC location B name (15 alphanumeric characters).
STR g3atmpncPncAddFmtB	1.3.6.1.4.1.6889.2.8.1.35.6.1.14	DisplayString	read-only	An DisplayString Object that contains the address format of the ATM PNC location B (DCC ATM, E.164 ATM Private, or ICD ATM).
STR g3atmpncPncAFIB	1.3.6.1.4.1.6889.2.8.1.35.6.1.15	DisplayString	read-only	An DisplayString Object that contains the AFI value of the ATM PNC location B AFI field (39 for DCC, 45 for E.164 ATM Private, or 47 for ICD ATM).
STR g3atmpncPncE164B	1.3.6.1.4.1.6889.2.8.1.35.6.1.16	DisplayString	read-only	An DisplayString Object that contains the hexidecimal value of the ATM PNC location B E.164 field (16 hexidecimal digits).
STR g3atmpncPncDCIB	1.3.6.1.4.1.6889.2.8.1.35.6.1.17	DisplayString	read-only	An DisplayString Object that contains the hexidecimal value of the ATM PNC location B DCC/ICD field (4 hexidecimal digits).
STR g3atmpncPncHoDsp1B	1.3.6.1.4.1.6889.2.8.1.35.6.1.18	DisplayString	read-only	An DisplayString Object that contains the hexidecimal value of the ATM PNC location B HO-DSP1 field (8 hexidecimal digits).
STR g3atmpncPncHoDsp2B	1.3.6.1.4.1.6889.2.8.1.35.6.1.19	DisplayString	read-only	An DisplayString Object that contains the hexidecimal value of the ATM PNC location B HO-DSP2 field (20 hexidecimal digits).
STR g3atmpncPncESIB	1.3.6.1.4.1.6889.2.8.1.35.6.1.20	DisplayString	read-only	An DisplayString Object that contains the hexidecimal value of the ATM PNC location B ESI field (12 hexidecimal digits).
STR g3atmpncPncSELB	1.3.6.1.4.1.6889.2.8.1.35.6.1.21	DisplayString	read-only	An DisplayString Object that contains the hexidecimal value of the ATM PNC location B SEL field (2 hexidecimal digits).
g3pnchealth	1.3.6.1.4.1.6889.2.8.1.36
INT g3pnchealthTage	1.3.6.1.4.1.6889.2.8.1.36.1	INTEGER	read-only	The number of timeticks since the pnc health data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3pnchealthTintvl object allows the Network Manager to determine the validity of the pnc health data in the cache and to control when the proxy agent extracts the pnc health data from the switch.
INT g3pnchealthTintvl	1.3.6.1.4.1.6889.2.8.1.36.2	INTEGER	read-write	An object containing the interval for which the pnc health data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for pnc health objects is received by the agent it uses the g3pnchealthTage and g3pnchealthTintvl objects to determine whether it should refresh the cached pnchealthTable. If g3pnchealthTstmp + g3pnchealthTintvl is less than the current value of the sysUpTime object then the agent refreshes the pnchealthTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3pnchealthTdelay	1.3.6.1.4.1.6889.2.8.1.36.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data
INT g3pnchealthTretrieve	1.3.6.1.4.1.6889.2.8.1.36.4	INTEGER	read-write	An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
STR g3pnchealthSoftwreLck	1.3.6.1.4.1.6889.2.8.1.36.5	DisplayString	read-only	A DisplayString Object containing the Software Locked status (yes or no).
STR g3pnchealthStandbyBusd	1.3.6.1.4.1.6889.2.8.1.36.6	DisplayString	read-only	A DisplayString Object containing the Standby Busied status (yes or no).
STR g3pnchealthStndbyRfsh	1.3.6.1.4.1.6889.2.8.1.36.7	DisplayString	read-only	A DisplayString Object containing the Standby Refresh status (yes or no).
STR g3pnchealthIntchDisble	1.3.6.1.4.1.6889.2.8.1.36.8	DisplayString	read-only	A DisplayString Object containing the Interchange Disable status (yes or no).
STR g3pnchealthPncAMode	1.3.6.1.4.1.6889.2.8.1.36.9	DisplayString	read-only	A DisplayString Object containing the current mode of PNC A.
STR g3pnchealthPncBMode	1.3.6.1.4.1.6889.2.8.1.36.10	DisplayString	read-only	A DisplayString Object containing the current mode of PNC B.
STR g3pnchealthPncAHealth	1.3.6.1.4.1.6889.2.8.1.36.11	DisplayString	read-only	A DisplayString Object containing the current state of health of PNC A.
STR g3pnchealthPncBHealth	1.3.6.1.4.1.6889.2.8.1.36.12	DisplayString	read-only	A DisplayString Object containing the current state of health of PNC B.
STR g3pnchealthPncAIntrIdx	1.3.6.1.4.1.6889.2.8.1.36.13	DisplayString	read-only	A DisplayString Object containing the current PN Interchange Index for PNC A.
STR g3pnchealthPncBIntrIdx	1.3.6.1.4.1.6889.2.8.1.36.14	DisplayString	read-only	A DisplayString Object containing the current PN Interchange Index for PNC B.
GAU g3pnchealthPncAMajor	1.3.6.1.4.1.6889.2.8.1.36.15	Gauge	read-only	A Gauge object containing the number of logged major alarms for PNC A.
GAU g3pnchealthPncBMajor	1.3.6.1.4.1.6889.2.8.1.36.16	Gauge	read-only	A Gauge object containing the number of logged major alarms for PNC B.
GAU g3pnchealthPncAMinor	1.3.6.1.4.1.6889.2.8.1.36.17	Gauge	read-only	A Gauge object containing the number of logged minor alarms for PNC A.
GAU g3pnchealthPncBMinor	1.3.6.1.4.1.6889.2.8.1.36.18	Gauge	read-only	A Gauge object containing the number of logged minor alarms for PNC B.
GAU g3pnchealthPncAWarning	1.3.6.1.4.1.6889.2.8.1.36.19	Gauge	read-only	A Gauge object containing the number of logged warning alarms for PNC A.
GAU g3pnchealthPncBWarning	1.3.6.1.4.1.6889.2.8.1.36.20	Gauge	read-only	A Gauge object containing the number of logged warning alarms for PNC B.
STR g3pnchealthPncASNIntrIdx	1.3.6.1.4.1.6889.2.8.1.36.21	DisplayString	read-only	A DisplayString Object containing the current SN Interchange Index for PNC A.
STR g3pnchealthPncBSNIntrIdx	1.3.6.1.4.1.6889.2.8.1.36.22	DisplayString	read-only	A DisplayString Object containing the current SN Interchange Index for PNC B.
g3siggroup	1.3.6.1.4.1.6889.2.8.1.37
INT g3siggroupTage	1.3.6.1.4.1.6889.2.8.1.37.1	INTEGER	read-only	The number of timeticks since the signaling group data was extracted from the switch by the G3 Proxy Agent. This object along with the g3siggroupTintvl object allows the Network Manager to determine the validity of the signaling group data in the cache and to control when the proxy agent extracts the signaling group data from the switch.
INT g3siggroupTintvl	1.3.6.1.4.1.6889.2.8.1.37.2	INTEGER	read-write	An object containing the interval for which the signaling group data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for signaling group data objects is received by the agent it uses the g3siggroupTage and g3siggroupTintvl objects to determine whether it should refresh the cached siggroupTable. If g3siggroupTstmp + g3siggroupTintvl is less than the current value of the sysUpTime object then the agent refreshes the siggroupTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3siggroupTdelay	1.3.6.1.4.1.6889.2.8.1.37.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data
INT g3siggroupTretrieve	1.3.6.1.4.1.6889.2.8.1.37.4	INTEGER	read-write	An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3siggroupTcount	1.3.6.1.4.1.6889.2.8.1.37.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3siggroupTable	1.3.6.1.4.1.6889.2.8.1.37.6		not-accessible	A list of g3siggroup entries.
g3siggroupEntry	1.3.6.1.4.1.6889.2.8.1.37.6.1		not-accessible	A g3siggroup entry containing objects of the g3siggroup information sent by the switch.
INT g3siggroupGrpNbr	1.3.6.1.4.1.6889.2.8.1.37.6.1.1	INTEGER	read-only	An INTEGER Object that uniquely identifies an administered Signaling Group.
STR g3siggroupPriDChannel	1.3.6.1.4.1.6889.2.8.1.37.6.1.2	DisplayString	read-only	A DisplayString Object that uniquely identifies the Primary D channel adminstered for this Signaling Group. The syntax for the Primary D Channel is as follows: cabinet(01-44):carrier(A-E):slot(01-20) port(01-32).
STR g3siggroupSecDChannel	1.3.6.1.4.1.6889.2.8.1.37.6.1.3	DisplayString	read-only	A DisplayString Object that uniquely identifies the Secondary D channel adminstered for this Signaling Group. The syntax for the Secondary D Channel is as follows: cabinet(01-44):carrier(A-E): slot(01-20):port(01-32).
STR g3siggroupBoard1	1.3.6.1.4.1.6889.2.8.1.37.6.1.4	DisplayString	read-only	A DisplayString Object that uniquely identifies a board based on its location in the system. The syntax for the Board Location is as follows: cabinet(01-44):carrier(A-E):slot(01-20).
STR g3siggroupBoard2	1.3.6.1.4.1.6889.2.8.1.37.6.1.5	DisplayString	read-only	See DESCRIPTION of g3siggroupBoard1.
STR g3siggroupBoard3	1.3.6.1.4.1.6889.2.8.1.37.6.1.6	DisplayString	read-only	See DESCRIPTION of g3siggroupBoard1.
STR g3siggroupBoard4	1.3.6.1.4.1.6889.2.8.1.37.6.1.7	DisplayString	read-only	See DESCRIPTION of g3siggroupBoard1.
STR g3siggroupBoard5	1.3.6.1.4.1.6889.2.8.1.37.6.1.8	DisplayString	read-only	See DESCRIPTION of g3siggroupBoard1.
STR g3siggroupBoard6	1.3.6.1.4.1.6889.2.8.1.37.6.1.9	DisplayString	read-only	See DESCRIPTION of g3siggroupBoard1.
STR g3siggroupBoard7	1.3.6.1.4.1.6889.2.8.1.37.6.1.10	DisplayString	read-only	See DESCRIPTION of g3siggroupBoard1.
STR g3siggroupBoard8	1.3.6.1.4.1.6889.2.8.1.37.6.1.11	DisplayString	read-only	See DESCRIPTION of g3siggroupBoard1.
STR g3siggroupBoard9	1.3.6.1.4.1.6889.2.8.1.37.6.1.12	DisplayString	read-only	See DESCRIPTION of g3siggroupBoard1.
STR g3siggroupBoard10	1.3.6.1.4.1.6889.2.8.1.37.6.1.13	DisplayString	read-only	See DESCRIPTION of g3siggroupBoard1.
STR g3siggroupBoard11	1.3.6.1.4.1.6889.2.8.1.37.6.1.14	DisplayString	read-only	See DESCRIPTION of g3siggroupBoard1.
STR g3siggroupBoard12	1.3.6.1.4.1.6889.2.8.1.37.6.1.15	DisplayString	read-only	See DESCRIPTION of g3siggroupBoard1.
STR g3siggroupBoard13	1.3.6.1.4.1.6889.2.8.1.37.6.1.16	DisplayString	read-only	See DESCRIPTION of g3siggroupBoard1.
STR g3siggroupBoard14	1.3.6.1.4.1.6889.2.8.1.37.6.1.17	DisplayString	read-only	See DESCRIPTION of g3siggroupBoard1.
STR g3siggroupBoard15	1.3.6.1.4.1.6889.2.8.1.37.6.1.18	DisplayString	read-only	See DESCRIPTION of g3siggroupBoard1.
STR g3siggroupBoard16	1.3.6.1.4.1.6889.2.8.1.37.6.1.19	DisplayString	read-only	See DESCRIPTION of g3siggroupBoard1.
STR g3siggroupBoard17	1.3.6.1.4.1.6889.2.8.1.37.6.1.20	DisplayString	read-only	See DESCRIPTION of g3siggroupBoard1.
STR g3siggroupBoard18	1.3.6.1.4.1.6889.2.8.1.37.6.1.21	DisplayString	read-only	See DESCRIPTION of g3siggroupBoard1.
STR g3siggroupBoard19	1.3.6.1.4.1.6889.2.8.1.37.6.1.22	DisplayString	read-only	See DESCRIPTION of g3siggroupBoard1.
STR g3siggroupBoard20	1.3.6.1.4.1.6889.2.8.1.37.6.1.23	DisplayString	read-only	See DESCRIPTION of g3siggroupBoard1.
INT g3siggroupIntfNum1	1.3.6.1.4.1.6889.2.8.1.37.6.1.24	INTEGER	read-only	An INTEGER object containing the Signaling Group Interface Number using this board.
INT g3siggroupIntfNum2	1.3.6.1.4.1.6889.2.8.1.37.6.1.25	INTEGER	read-only	See DESCRIPTION of g3siggroupIntfNum1.
INT g3siggroupIntfNum3	1.3.6.1.4.1.6889.2.8.1.37.6.1.26	INTEGER	read-only	See DESCRIPTION of g3siggroupIntfNum1.
INT g3siggroupIntfNum4	1.3.6.1.4.1.6889.2.8.1.37.6.1.27	INTEGER	read-only	See DESCRIPTION of g3siggroupIntfNum1.
INT g3siggroupIntfNum5	1.3.6.1.4.1.6889.2.8.1.37.6.1.28	INTEGER	read-only	See DESCRIPTION of g3siggroupIntfNum1.
INT g3siggroupIntfNum6	1.3.6.1.4.1.6889.2.8.1.37.6.1.29	INTEGER	read-only	See DESCRIPTION of g3siggroupIntfNum1.
INT g3siggroupIntfNum7	1.3.6.1.4.1.6889.2.8.1.37.6.1.30	INTEGER	read-only	See DESCRIPTION of g3siggroupIntfNum1.
INT g3siggroupIntfNum8	1.3.6.1.4.1.6889.2.8.1.37.6.1.31	INTEGER	read-only	See DESCRIPTION of g3siggroupIntfNum1.
INT g3siggroupIntfNum9	1.3.6.1.4.1.6889.2.8.1.37.6.1.32	INTEGER	read-only	See DESCRIPTION of g3siggroupIntfNum1.
INT g3siggroupIntfNum10	1.3.6.1.4.1.6889.2.8.1.37.6.1.33	INTEGER	read-only	See DESCRIPTION of g3siggroupIntfNum1.
INT g3siggroupIntfNum11	1.3.6.1.4.1.6889.2.8.1.37.6.1.34	INTEGER	read-only	See DESCRIPTION of g3siggroupIntfNum1.
INT g3siggroupIntfNum12	1.3.6.1.4.1.6889.2.8.1.37.6.1.35	INTEGER	read-only	See DESCRIPTION of g3siggroupIntfNum1.
INT g3siggroupIntfNum13	1.3.6.1.4.1.6889.2.8.1.37.6.1.36	INTEGER	read-only	See DESCRIPTION of g3siggroupIntfNum1.
INT g3siggroupIntfNum14	1.3.6.1.4.1.6889.2.8.1.37.6.1.37	INTEGER	read-only	See DESCRIPTION of g3siggroupIntfNum1.
INT g3siggroupIntfNum15	1.3.6.1.4.1.6889.2.8.1.37.6.1.38	INTEGER	read-only	See DESCRIPTION of g3siggroupIntfNum1.
INT g3siggroupIntfNum16	1.3.6.1.4.1.6889.2.8.1.37.6.1.39	INTEGER	read-only	See DESCRIPTION of g3siggroupIntfNum1.
INT g3siggroupIntfNum17	1.3.6.1.4.1.6889.2.8.1.37.6.1.40	INTEGER	read-only	See DESCRIPTION of g3siggroupIntfNum1.
INT g3siggroupIntfNum18	1.3.6.1.4.1.6889.2.8.1.37.6.1.41	INTEGER	read-only	See DESCRIPTION of g3siggroupIntfNum1.
INT g3siggroupIntfNum19	1.3.6.1.4.1.6889.2.8.1.37.6.1.42	INTEGER	read-only	See DESCRIPTION of g3siggroupIntfNum1.
INT g3siggroupIntfNum20	1.3.6.1.4.1.6889.2.8.1.37.6.1.43	INTEGER	read-only	See DESCRIPTION of g3siggroupIntfNum1.
STR g3siggroupAsocSignal	1.3.6.1.4.1.6889.2.8.1.37.6.1.44	DisplayString	read-only	A DisplayString Object containing the Associated Signaling status (y or n).
g3restart	1.3.6.1.4.1.6889.2.8.1.38
INT g3restartTage	1.3.6.1.4.1.6889.2.8.1.38.1	INTEGER	read-only	The number of timeticks since the system restart data was extracted from the switch by the G3 Proxy Agent. This object along with the g3restartTintvl object allows the Network Manager to determine the validity of the system restart data in the cache and to control when the proxy agent extracts the system restart data from the switch.
INT g3restartTintvl	1.3.6.1.4.1.6889.2.8.1.38.2	INTEGER	read-write	An object containing the interval for which the system restart data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for system restart data objects is received by the agent it uses the g3restartTage and g3restartTintvl objects to determine whether it should refresh the cached restartTable. If g3restartTstmp + g3restartTintvl is less than the current value of the sysUpTime object then the agent refreshes the restartTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3restartTdelay	1.3.6.1.4.1.6889.2.8.1.38.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3restartTretrieve	1.3.6.1.4.1.6889.2.8.1.38.4	INTEGER	read-write	An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3restartTcount	1.3.6.1.4.1.6889.2.8.1.38.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3restartTable	1.3.6.1.4.1.6889.2.8.1.38.6		not-accessible	A list of g3restart entries.
g3restartEntry	1.3.6.1.4.1.6889.2.8.1.38.6.1		not-accessible	A g3restart entry containing objects of the g3restart information sent by the switch.
INT g3restartMonth	1.3.6.1.4.1.6889.2.8.1.38.6.1.1	INTEGER	read-only	An INTEGER Object that uniquely identifies the Month (01-12) in which a system restart occurred.
INT g3restartDay	1.3.6.1.4.1.6889.2.8.1.38.6.1.2	INTEGER	read-only	An INTEGER Object that uniquely identifies the Day (01-31) in which a system restart occurred.
INT g3restartHour	1.3.6.1.4.1.6889.2.8.1.38.6.1.3	INTEGER	read-only	An INTEGER Object that uniquely identifies the Hour (00-23) in which a system restart occurred.
INT g3restartMinute	1.3.6.1.4.1.6889.2.8.1.38.6.1.4	INTEGER	read-only	An INTEGER Object that uniquely identifies the Minute (00-59) in which a system restart occurred.
STR g3restartDateTime	1.3.6.1.4.1.6889.2.8.1.38.6.1.5	DisplayString	read-only	A DisplayString object containing the date and time (of the form MM/DD HH:MM) in which a system restart occurred.
STR g3restartLevel	1.3.6.1.4.1.6889.2.8.1.38.6.1.6	DisplayString	read-only	A DisplayString object containing the level of the restart (WARM, COLD1, COLD2, REBOOT, or XREBOOT).
STR g3restartCarrier	1.3.6.1.4.1.6889.2.8.1.38.6.1.7	DisplayString	read-only	A DisplayString object containing the carrier (A or B) on which the restart occurred.
STR g3restartCraftDemand	1.3.6.1.4.1.6889.2.8.1.38.6.1.8	DisplayString	read-only	A DisplayString object containing a flag (Y or N) indicating whether or not the restart was craft demanded.
STR g3restartEscalated	1.3.6.1.4.1.6889.2.8.1.38.6.1.9	DisplayString	read-only	A DisplayString object containing a flag (Y or N) indicating whether or not the restart was escalated.
STR g3restartInterchange	1.3.6.1.4.1.6889.2.8.1.38.6.1.10	DisplayString	read-only	A DisplayString object containing a flag (Y or N) indicating whether or not an interchange took place.
STR g3restartUnavailable	1.3.6.1.4.1.6889.2.8.1.38.6.1.11	DisplayString	read-only	A DisplayString object containing the amount of time (of the form HH:MM:SS) the system was unavailable due to the restart.
STR g3restartCause	1.3.6.1.4.1.6889.2.8.1.38.6.1.12	DisplayString	read-only	A DisplayString object containing the cause of the system restart.
INT g3restartIndex	1.3.6.1.4.1.6889.2.8.1.38.6.1.13	INTEGER	read-only	An INTEGER Object that provides a secondary key for multiple restarts occurring in the same minute.
g3fiberlink	1.3.6.1.4.1.6889.2.8.1.39
INT g3fiberlinkTage	1.3.6.1.4.1.6889.2.8.1.39.1	INTEGER	read-only	The number of timeticks since the fiberlink data was extracted from the switch by the G3 Proxy Agent. This object along with the g3fiberlinkTintvl object allows the Network Manager to determine the validity of the fiberlink data in the cache and to control when the proxy agent extracts the fiberlink data from the switch.
INT g3fiberlinkTintvl	1.3.6.1.4.1.6889.2.8.1.39.2	INTEGER	read-write	An object containing the interval for which the fiberlink data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for fiberlink data objects is received by the agent it uses the g3fiberlinkTage and g3fiberlinkTintvl objects to determine whether it should refresh the cached fiberlinkTable. If g3fiberlinkTstmp + g3fiberlinkTintvl is less than the current value of the sysUpTime object then the agent refreshes the fiberlinkTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3fiberlinkTdelay	1.3.6.1.4.1.6889.2.8.1.39.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data
INT g3fiberlinkTretrieve	1.3.6.1.4.1.6889.2.8.1.39.4	INTEGER	read-write	An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3fiberlinkTcount	1.3.6.1.4.1.6889.2.8.1.39.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3fiberlinkTable	1.3.6.1.4.1.6889.2.8.1.39.6		not-accessible	A list of g3fiberlink entries.
g3fiberlinkEntry	1.3.6.1.4.1.6889.2.8.1.39.6.1		not-accessible	A g3fiberlink entry containing objects of the g3fiberlink information sent by the switch.
INT g3fiberlinkFLNumber	1.3.6.1.4.1.6889.2.8.1.39.6.1.1	INTEGER	read-only	An INTEGER Object that uniquely identifies an administered Fiber Link.
STR g3fiberlinkDS1Type	1.3.6.1.4.1.6889.2.8.1.39.6.1.2	DisplayString	read-only	A DisplayString Object that identifies the type of DS1 Converter board used if a DS1 converter is used (TNXXXX).
STR g3fiberlinkE1Type	1.3.6.1.4.1.6889.2.8.1.39.6.1.3	DisplayString	read-only	A DisplayString Object that identifies the type of the Endpoint for Endpoint 1 (sni or ei).
STR g3fiberlinkE2Type	1.3.6.1.4.1.6889.2.8.1.39.6.1.4	DisplayString	read-only	A DisplayString Object that identifies the type of the Endpoint for Endpoint 1 (sni or ei).
STR g3fiberlinkE1ABoard	1.3.6.1.4.1.6889.2.8.1.39.6.1.5	DisplayString	read-only	A DisplayString Object that uniquely identifies the Endpoint 1 A-PNC SNI or EI board based on its location in the system. The syntax for the Board Location is as follows: cabinet(01-44):carrier(A-E):slot(01-20).
STR g3fiberlinkE2ABoard	1.3.6.1.4.1.6889.2.8.1.39.6.1.6	DisplayString	read-only	A DisplayString Object that uniquely identifies the Endpoint 2 A-PNC SNI or EI board based on its location in the system. The syntax for the Board Location is as follows: cabinet(01-44):carrier(A-E):slot(01-20).
STR g3fiberlinkE1BBoard	1.3.6.1.4.1.6889.2.8.1.39.6.1.7	DisplayString	read-only	A DisplayString Object that uniquely identifies the Endpoint 1 B-PNC SNI or EI board based on its location in the system. The syntax for the Board Location is as follows: cabinet(01-44):carrier(A-E):slot(01-20).
STR g3fiberlinkE2BBoard	1.3.6.1.4.1.6889.2.8.1.39.6.1.8	DisplayString	read-only	A DisplayString Object that uniquely identifies the Endpoint 2 B-PNC SNI or EI board based on its location in the system. The syntax for the Board Location is as follows: cabinet(01-44):carrier(A-E):slot(01-20).
STR g3fiberlinkE1ADs1Board	1.3.6.1.4.1.6889.2.8.1.39.6.1.9	DisplayString	read-only	A DisplayString Object that uniquely identifies the Endpoint 1 A-PNC DS1 board based on its location in the system. The syntax for the Board Location is as follows: cabinet(01-44):carrier(A-E):slot(01-20).
STR g3fiberlinkE2ADs1Board	1.3.6.1.4.1.6889.2.8.1.39.6.1.10	DisplayString	read-only	A DisplayString Object that uniquely identifies the Endpoint 2 A-PNC DS1 board based on its location in the system. The syntax for the Board Location is as follows: cabinet(01-44):carrier(A-E):slot(01-20).
STR g3fiberlinkE1BDs1Board	1.3.6.1.4.1.6889.2.8.1.39.6.1.11	DisplayString	read-only	A DisplayString Object that uniquely identifies the Endpoint 1 B-PNC DS1 board based on its location in the system. The syntax for the Board Location is as follows: cabinet(01-44):carrier(A-E):slot(01-20).
STR g3fiberlinkE2BDs1Board	1.3.6.1.4.1.6889.2.8.1.39.6.1.12	DisplayString	read-only	A DisplayString Object that uniquely identifies the Endpoint 2 B-PNC DS1 board based on its location in the system. The syntax for the Board Location is as follows: cabinet(01-44):carrier(A-E):slot(01-20).
g3routepattern	1.3.6.1.4.1.6889.2.8.1.40
INT g3routepatternTage	1.3.6.1.4.1.6889.2.8.1.40.1	INTEGER	read-only	The number of timeticks since the routepattern data was extracted from the switch by the G3 Proxy Agent. This object along with the g3routepatternTintvl object allows the Network Manager to determine the validity of the routepattern data in the cache and to control when the proxy agent extracts the routepattern data from the switch.
INT g3routepatternTintvl	1.3.6.1.4.1.6889.2.8.1.40.2	INTEGER	read-write	An object containing the interval for which the routepattern data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for routepattern data objects is received by the agent it uses the g3routepatternTage and g3routepatternTintvl objects to determine whether it should refresh the cached routepatternTable. If g3routepatternTstmp + g3routepatternTintvl is less than the current value of the sysUpTime object then the agent refreshes the routepatternTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3routepatternTdelay	1.3.6.1.4.1.6889.2.8.1.40.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data
INT g3routepatternTretrieve	1.3.6.1.4.1.6889.2.8.1.40.4	INTEGER	read-write	An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3routepatternTcount	1.3.6.1.4.1.6889.2.8.1.40.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3routepatternTable	1.3.6.1.4.1.6889.2.8.1.40.6		not-accessible	A list of g3routepattern entries.
g3routepatternEntry	1.3.6.1.4.1.6889.2.8.1.40.6.1		not-accessible	A g3routepattern entry containing objects of the g3routepattern information sent by the switch.
INT g3routepatternRPNumber	1.3.6.1.4.1.6889.2.8.1.40.6.1.1	INTEGER	read-only	An INTEGER Object that uniquely identifies an administered Route Pattern.
INT g3routepatternTGNumber1	1.3.6.1.4.1.6889.2.8.1.40.6.1.2	INTEGER	read-only	An INTEGER Object that uniquely identifies the trunk group associated with group number 1.
INT g3routepatternTGNumber2	1.3.6.1.4.1.6889.2.8.1.40.6.1.3	INTEGER	read-only	An INTEGER Object that uniquely identifies the trunk group associated with group number 2.
INT g3routepatternTGNumber3	1.3.6.1.4.1.6889.2.8.1.40.6.1.4	INTEGER	read-only	An INTEGER Object that uniquely identifies the trunk group associated with group number 3.
INT g3routepatternTGNumber4	1.3.6.1.4.1.6889.2.8.1.40.6.1.5	INTEGER	read-only	An INTEGER Object that uniquely identifies the trunk group associated with group number 4.
INT g3routepatternTGNumber5	1.3.6.1.4.1.6889.2.8.1.40.6.1.6	INTEGER	read-only	An INTEGER Object that uniquely identifies the trunk group associated with group number 5.
INT g3routepatternTGNumber6	1.3.6.1.4.1.6889.2.8.1.40.6.1.7	INTEGER	read-only	An INTEGER Object that uniquely identifies the trunk group associated with group number 6.
INT g3routepatternTGNumber7	1.3.6.1.4.1.6889.2.8.1.40.6.1.8	INTEGER	read-only	An INTEGER Object that uniquely identifies the trunk group associated with group number 7.
INT g3routepatternTGNumber8	1.3.6.1.4.1.6889.2.8.1.40.6.1.9	INTEGER	read-only	An INTEGER Object that uniquely identifies the trunk group associated with group number 8.
INT g3routepatternTGNumber9	1.3.6.1.4.1.6889.2.8.1.40.6.1.10	INTEGER	read-only	An INTEGER Object that uniquely identifies the trunk group associated with group number 9.
INT g3routepatternTGNumber10	1.3.6.1.4.1.6889.2.8.1.40.6.1.11	INTEGER	read-only	An INTEGER Object that uniquely identifies the trunk group associated with group number 10.
INT g3routepatternTGNumber11	1.3.6.1.4.1.6889.2.8.1.40.6.1.12	INTEGER	read-only	An INTEGER Object that uniquely identifies the trunk group associated with group number 11.
INT g3routepatternTGNumber12	1.3.6.1.4.1.6889.2.8.1.40.6.1.13	INTEGER	read-only	An INTEGER Object that uniquely identifies the trunk group associated with group number 12.
INT g3routepatternTGNumber13	1.3.6.1.4.1.6889.2.8.1.40.6.1.14	INTEGER	read-only	An INTEGER Object that uniquely identifies the trunk group associated with group number 13.
INT g3routepatternTGNumber14	1.3.6.1.4.1.6889.2.8.1.40.6.1.15	INTEGER	read-only	An INTEGER Object that uniquely identifies the trunk group associated with group number 14.
INT g3routepatternTGNumber15	1.3.6.1.4.1.6889.2.8.1.40.6.1.16	INTEGER	read-only	An INTEGER Object that uniquely identifies the trunk group associated with group number 15.
INT g3routepatternTGNumber16	1.3.6.1.4.1.6889.2.8.1.40.6.1.17	INTEGER	read-only	An INTEGER Object that uniquely identifies the trunk group associated with group number 16.
g3trunkcfg	1.3.6.1.4.1.6889.2.8.1.41
INT g3trunkcfgTage	1.3.6.1.4.1.6889.2.8.1.41.1	INTEGER	read-only	The number of timeticks since the trunk config data was extracted from the switch by the G3 Proxy Agent. This object along with the g3trunkcfgTintvl object allows the Network Manager to determine the validity of the trunk config data in the cache and to control when the proxy agent extracts the trunk config data from the switch.
INT g3trunkcfgTintvl	1.3.6.1.4.1.6889.2.8.1.41.2	INTEGER	read-write	An object containing the interval for which the trunk config data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for trunk config data objects is received by the agent it uses the g3trunkcfgTage and g3trunkcfgTintvl objects to determine whether it should refresh the cached trunkcfgTable. If g3trunkcfgTstmp + g3trunkcfgTintvl is less than the current value of the sysUpTime object then the agent refreshes the trunkcfgTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3trunkcfgTdelay	1.3.6.1.4.1.6889.2.8.1.41.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data
INT g3trunkcfgTretrieve	1.3.6.1.4.1.6889.2.8.1.41.4	INTEGER	read-write	An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3trunkcfgTcount	1.3.6.1.4.1.6889.2.8.1.41.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3trunkcfgTable	1.3.6.1.4.1.6889.2.8.1.41.6		not-accessible	A list of g3trunkcfg entries.
g3trunkcfgEntry	1.3.6.1.4.1.6889.2.8.1.41.6.1		not-accessible	A g3trunkcfg entry containing objects of the g3trunkcfg information sent by the switch.
STR g3trunkcfgBoardNum	1.3.6.1.4.1.6889.2.8.1.41.6.1.1	DisplayString	read-only	A DisplayString Object that uniquely identifies a trunk board based on its location in the system. The syntax for the Board Number is as follows: cabinet(01-44):carrier(A-E):slot(01-20).
STR g3trunkcfgBoardType	1.3.6.1.4.1.6889.2.8.1.41.6.1.2	DisplayString	read-only	A DisplayString Object that contains a text description of the type of trunk board.
STR g3trunkcfgCode	1.3.6.1.4.1.6889.2.8.1.41.6.1.3	DisplayString	read-only	A DisplayString Object that contains the code that defines the type of trunk board.
STR g3trunkcfgVintage	1.3.6.1.4.1.6889.2.8.1.41.6.1.4	DisplayString	read-only	A DisplayString Object that contains the vintage of the trunk board.
STR g3trunkcfgSuffix	1.3.6.1.4.1.6889.2.8.1.41.6.1.5	DisplayString	read-only	A DisplayString Object that contains the suffix to the code
g3stationcfg	1.3.6.1.4.1.6889.2.8.1.42
INT g3stationcfgTage	1.3.6.1.4.1.6889.2.8.1.42.1	INTEGER	read-only	The number of timeticks since the station config data was extracted from the switch by the G3 Proxy Agent. This object along with the g3stationcfgTintvl object allows the Network Manager to determine the validity of the station config data in the cache and to control when the proxy agent extracts the station config data from the switch.
INT g3stationcfgTintvl	1.3.6.1.4.1.6889.2.8.1.42.2	INTEGER	read-write	An object containing the interval for which the station config data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for station config data objects is received by the agent it uses the g3stationcfgTage and g3stationcfgTintvl objects to determine whether it should refresh the cached stationcfgTable. If g3stationcfgTstmp + g3stationcfgTintvl is less than the current value of the sysUpTime object then the agent refreshes the stationcfgTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3stationcfgTdelay	1.3.6.1.4.1.6889.2.8.1.42.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data
INT g3stationcfgTretrieve	1.3.6.1.4.1.6889.2.8.1.42.4	INTEGER	read-write	An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3stationcfgTcount	1.3.6.1.4.1.6889.2.8.1.42.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3stationcfgTable	1.3.6.1.4.1.6889.2.8.1.42.6		not-accessible	A list of g3stationcfg entries.
g3stationcfgEntry	1.3.6.1.4.1.6889.2.8.1.42.6.1		not-accessible	A g3stationcfg entry containing objects of the g3stationcfg information sent by the switch.
STR g3stationcfgBoardNum	1.3.6.1.4.1.6889.2.8.1.42.6.1.1	DisplayString	read-only	A DisplayString Object that uniquely identifies a station board based on its location in the system. The syntax for the Board Number is as follows: cabinet(01-44):carrier(A-E):slot(01-20).
STR g3stationcfgBoardType	1.3.6.1.4.1.6889.2.8.1.42.6.1.2	DisplayString	read-only	A DisplayString Object that contains a text description of the type of station board.
STR g3stationcfgCode	1.3.6.1.4.1.6889.2.8.1.42.6.1.3	DisplayString	read-only	A DisplayString Object that contains the code that defines the type of station board.
STR g3stationcfgVintage	1.3.6.1.4.1.6889.2.8.1.42.6.1.4	DisplayString	read-only	A DisplayString Object that contains the vintage of the station board.
STR g3stationcfgSuffix	1.3.6.1.4.1.6889.2.8.1.42.6.1.5	DisplayString	read-only	A DisplayString Object that contains the suffix to the code
g3atmcfg	1.3.6.1.4.1.6889.2.8.1.43
INT g3atmcfgTage	1.3.6.1.4.1.6889.2.8.1.43.1	INTEGER	read-only	The number of timeticks since the atm config data was extracted from the switch by the G3 Proxy Agent. This object along with the g3atmcfgTintvl object allows the Network Manager to determine the validity of the atm config data in the cache and to control when the proxy agent extracts the atm config data from the switch.
INT g3atmcfgTintvl	1.3.6.1.4.1.6889.2.8.1.43.2	INTEGER	read-write	An object containing the interval for which the atm config data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for atm config data objects is received by the agent it uses the g3atmcfgTage and g3atmcfgTintvl objects to determine whether it should refresh the cached atmcfgTable. If g3atmcfgTstmp + g3atmcfgTintvl is less than the current value of the sysUpTime object then the agent refreshes the atmcfgTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3atmcfgTdelay	1.3.6.1.4.1.6889.2.8.1.43.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data
INT g3atmcfgTretrieve	1.3.6.1.4.1.6889.2.8.1.43.4	INTEGER	read-write	An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3atmcfgTcount	1.3.6.1.4.1.6889.2.8.1.43.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3atmcfgTable	1.3.6.1.4.1.6889.2.8.1.43.6		not-accessible	A list of g3atmcfg entries.
g3atmcfgEntry	1.3.6.1.4.1.6889.2.8.1.43.6.1		not-accessible	A g3atmcfg entry containing objects of the g3atmcfg information sent by the switch.
STR g3atmcfgBoardNum	1.3.6.1.4.1.6889.2.8.1.43.6.1.1	DisplayString	read-only	A DisplayString Object that uniquely identifies a board used for ATM connectivity based on its location in the system. The syntax for the Board Number is as follows: cabinet(01-44):carrier(A-E):slot(01-20).
STR g3atmcfgCode	1.3.6.1.4.1.6889.2.8.1.43.6.1.2	DisplayString	read-only	A DisplayString Object that contains the code that defines the type of ATM connectivity board.
STR g3atmcfgBoardType	1.3.6.1.4.1.6889.2.8.1.43.6.1.3	DisplayString	read-only	A DisplayString Object that contains a text description of the type of ATM connectivity board.
STR g3atmcfgVintage	1.3.6.1.4.1.6889.2.8.1.43.6.1.4	DisplayString	read-only	A DisplayString Object that contains the vintage of the ATM connectivity board.
STR g3atmcfgName	1.3.6.1.4.1.6889.2.8.1.43.6.1.5	DisplayString	read-only	A DisplayString Object that contains the name of the ATM connectivity board.
STR g3atmcfgSuffix	1.3.6.1.4.1.6889.2.8.1.43.6.1.6	DisplayString	read-only	A DisplayString Object that contains the suffix to the code
g3aca	1.3.6.1.4.1.6889.2.8.1.44
INT g3acaTage	1.3.6.1.4.1.6889.2.8.1.44.1	INTEGER	read-only	The number of timeticks since the data was last extracted from the switch by the Proxy Agent. This object along with the g3acaintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3acaTintvl	1.3.6.1.4.1.6889.2.8.1.44.2	INTEGER	read-write	An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these data objects is received by the agent it uses the g3acaage and g3acaintvl objects to determine whether it should refresh the cached acaTable. If g3acastmp + g3acaintvl is less than the current value of the sysUpTime object then the agent refreshes the acaTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3acaTdelay	1.3.6.1.4.1.6889.2.8.1.44.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3acaTretrieve	1.3.6.1.4.1.6889.2.8.1.44.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3acaTcount	1.3.6.1.4.1.6889.2.8.1.44.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3acaTable	1.3.6.1.4.1.6889.2.8.1.44.6		not-accessible	A list of g3aca entries.
g3acaEntry	1.3.6.1.4.1.6889.2.8.1.44.6.1		not-accessible	A g3aca entry containing objects of the g3aca information sent by the switch.
INT g3acaTGNumber	1.3.6.1.4.1.6889.2.8.1.44.6.1.1	INTEGER	read-only	An object containing the trunk group number.
INT g3acaTGMember	1.3.6.1.4.1.6889.2.8.1.44.6.1.2	INTEGER	read-only	An object containing the trunk group member number.
STR g3acaDayTime	1.3.6.1.4.1.6889.2.8.1.44.6.1.3	DisplayString	read-only	A DisplayString Object that contains the day and time at which either the threshold for short holding time calls was exceeded or long holding time call was reached and a referral call was placed.
INT g3acaYear	1.3.6.1.4.1.6889.2.8.1.44.6.1.4	INTEGER	read-only	An object containing the Year the command was executed.
INT g3acaMonth	1.3.6.1.4.1.6889.2.8.1.44.6.1.5	INTEGER	read-only	An object containing the Month the command was executed.
INT g3acaDay	1.3.6.1.4.1.6889.2.8.1.44.6.1.6	INTEGER	read-only	An object containing the Day the command was executed.
INT g3acaHour	1.3.6.1.4.1.6889.2.8.1.44.6.1.7	INTEGER	read-only	An object containing the Hour the command was executed.
INT g3acaTGAccess	1.3.6.1.4.1.6889.2.8.1.44.6.1.8	INTEGER	read-only	An object containing the trunk access code for the trunk group.
STR g3acaRefType	1.3.6.1.4.1.6889.2.8.1.44.6.1.9	DisplayString	read-only	A DisplayString Object that indicates whether the referral occurred as the result of too many short holding time calls or an excessively long holding time call.
STR g3acaWideBand	1.3.6.1.4.1.6889.2.8.1.44.6.1.10	DisplayString	read-only	A DisplayString Object that indicates whether the call was a wideband call.
g3atmtrunk	1.3.6.1.4.1.6889.2.8.1.45
INT g3atmtrunkTage	1.3.6.1.4.1.6889.2.8.1.45.1	INTEGER	read-only	The number of timeticks since the atm trunk data was extracted from the switch by the G3 Proxy Agent. This object along with the g3atmtrunkTintvl object allows the Network Manager to determine the validity of the atm trunk data in the cache and to control when the proxy agent extracts the atm trunk data from the switch.
INT g3atmtrunkTintvl	1.3.6.1.4.1.6889.2.8.1.45.2	INTEGER	read-write	An object containing the interval for which the atm trunk data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for atm trunk data objects is received by the agent it uses the g3atmtrunkTage and g3atmtrunkTintvl objects to determine whether it should refresh the cached atmtrunkTable. If g3atmtrunkTstmp + g3atmtrunkTintvl is less than the current value of the sysUpTime object then the agent refreshes the atmtrunkTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3atmtrunkTdelay	1.3.6.1.4.1.6889.2.8.1.45.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data
INT g3atmtrunkTretrieve	1.3.6.1.4.1.6889.2.8.1.45.4	INTEGER	read-write	An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3atmtrunkTcount	1.3.6.1.4.1.6889.2.8.1.45.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3atmtrunkTable	1.3.6.1.4.1.6889.2.8.1.45.6		not-accessible	A list of g3atmtrunk entries.
g3atmtrunkEntry	1.3.6.1.4.1.6889.2.8.1.45.6.1		not-accessible	A g3atmtrunk entry containing objects of the g3atmtrunk information sent by the switch.
STR g3atmtrunkLocation	1.3.6.1.4.1.6889.2.8.1.45.6.1.1	DisplayString	read-only	A DisplayString Object that uniquely identifies the ATM trunk board based on its location in the system. The syntax for the Board Number is as follows: cabinet(01-44):carrier(A-E):slot(01-20).
STR g3atmtrunkName	1.3.6.1.4.1.6889.2.8.1.45.6.1.2	DisplayString	read-only	A DisplayString Object that identifies the ATM trunk board by name.
STR g3atmtrunkSynch	1.3.6.1.4.1.6889.2.8.1.45.6.1.3	DisplayString	read-only	A DisplayString Object that identifies whether the ATM trunk is synchronization capable (y or n).
g3atmportpg1	1.3.6.1.4.1.6889.2.8.1.46
INT g3atmportpg1Tage	1.3.6.1.4.1.6889.2.8.1.46.1	INTEGER	read-only	The number of timeticks since the atm port data was extracted from the switch by the G3 Proxy Agent. This object along with the g3atmportpg1Tintvl object allows the Network Manager to determine the validity of the atm port data in the cache and to control when the proxy agent extracts the atm port data from the switch.
INT g3atmportpg1Tintvl	1.3.6.1.4.1.6889.2.8.1.46.2	INTEGER	read-write	An object containing the interval for which the atm port data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for atm port data objects is received by the agent it uses the g3atmportpg1sTage and g3atmportpg1sTintvl objects to determine whether it should refresh the cached atmportpg1sTable. If g3atmportpg1sTstmp + g3atmportpg1sTintvl is less than the current value of the sysUpTime object then the agent refreshes the atmportpg1sTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3atmportpg1Tdelay	1.3.6.1.4.1.6889.2.8.1.46.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data
INT g3atmportpg1Tretrieve	1.3.6.1.4.1.6889.2.8.1.46.4	INTEGER	read-write	An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3atmportpg1Tcount	1.3.6.1.4.1.6889.2.8.1.46.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3atmportpg1Table	1.3.6.1.4.1.6889.2.8.1.46.6		not-accessible	A list of g3atmportpg1 entries.
g3atmportpg1Entry	1.3.6.1.4.1.6889.2.8.1.46.6.1		not-accessible	A g3atmportpg1 entry containing objects of the g3atmportpg1 information sent by the switch.
STR g3atmportpg1Location	1.3.6.1.4.1.6889.2.8.1.46.6.1.1	DisplayString	read-only	A DisplayString Object that uniquely identifies the ATM trunk board based on its location in the system. The syntax for the Board Number is as follows: cabinet(01-44):carrier(A-E):slot(01-20).
INT g3atmportpg1SGNumber1	1.3.6.1.4.1.6889.2.8.1.46.6.1.2	INTEGER	read-only	An INTEGER Object that uniquely identifies the signaling group associated with the ATM ports (1 to 90) on page 1 of the form.
INT g3atmportpg1SGNumber2	1.3.6.1.4.1.6889.2.8.1.46.6.1.3	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber3	1.3.6.1.4.1.6889.2.8.1.46.6.1.4	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber4	1.3.6.1.4.1.6889.2.8.1.46.6.1.5	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber5	1.3.6.1.4.1.6889.2.8.1.46.6.1.6	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber6	1.3.6.1.4.1.6889.2.8.1.46.6.1.7	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber7	1.3.6.1.4.1.6889.2.8.1.46.6.1.8	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber8	1.3.6.1.4.1.6889.2.8.1.46.6.1.9	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber9	1.3.6.1.4.1.6889.2.8.1.46.6.1.10	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber10	1.3.6.1.4.1.6889.2.8.1.46.6.1.11	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber11	1.3.6.1.4.1.6889.2.8.1.46.6.1.12	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber12	1.3.6.1.4.1.6889.2.8.1.46.6.1.13	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber13	1.3.6.1.4.1.6889.2.8.1.46.6.1.14	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber14	1.3.6.1.4.1.6889.2.8.1.46.6.1.15	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber15	1.3.6.1.4.1.6889.2.8.1.46.6.1.16	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber16	1.3.6.1.4.1.6889.2.8.1.46.6.1.17	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber17	1.3.6.1.4.1.6889.2.8.1.46.6.1.18	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber18	1.3.6.1.4.1.6889.2.8.1.46.6.1.19	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber19	1.3.6.1.4.1.6889.2.8.1.46.6.1.20	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber20	1.3.6.1.4.1.6889.2.8.1.46.6.1.21	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber21	1.3.6.1.4.1.6889.2.8.1.46.6.1.22	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber22	1.3.6.1.4.1.6889.2.8.1.46.6.1.23	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber23	1.3.6.1.4.1.6889.2.8.1.46.6.1.24	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber24	1.3.6.1.4.1.6889.2.8.1.46.6.1.25	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber25	1.3.6.1.4.1.6889.2.8.1.46.6.1.26	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber26	1.3.6.1.4.1.6889.2.8.1.46.6.1.27	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber27	1.3.6.1.4.1.6889.2.8.1.46.6.1.28	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber28	1.3.6.1.4.1.6889.2.8.1.46.6.1.29	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber29	1.3.6.1.4.1.6889.2.8.1.46.6.1.30	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber30	1.3.6.1.4.1.6889.2.8.1.46.6.1.31	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber31	1.3.6.1.4.1.6889.2.8.1.46.6.1.32	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber32	1.3.6.1.4.1.6889.2.8.1.46.6.1.33	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber33	1.3.6.1.4.1.6889.2.8.1.46.6.1.34	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber34	1.3.6.1.4.1.6889.2.8.1.46.6.1.35	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber35	1.3.6.1.4.1.6889.2.8.1.46.6.1.36	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber36	1.3.6.1.4.1.6889.2.8.1.46.6.1.37	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber37	1.3.6.1.4.1.6889.2.8.1.46.6.1.38	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber38	1.3.6.1.4.1.6889.2.8.1.46.6.1.39	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber39	1.3.6.1.4.1.6889.2.8.1.46.6.1.40	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber40	1.3.6.1.4.1.6889.2.8.1.46.6.1.41	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber41	1.3.6.1.4.1.6889.2.8.1.46.6.1.42	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber42	1.3.6.1.4.1.6889.2.8.1.46.6.1.43	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber43	1.3.6.1.4.1.6889.2.8.1.46.6.1.44	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber44	1.3.6.1.4.1.6889.2.8.1.46.6.1.45	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber45	1.3.6.1.4.1.6889.2.8.1.46.6.1.46	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber46	1.3.6.1.4.1.6889.2.8.1.46.6.1.47	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber47	1.3.6.1.4.1.6889.2.8.1.46.6.1.48	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber48	1.3.6.1.4.1.6889.2.8.1.46.6.1.49	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber49	1.3.6.1.4.1.6889.2.8.1.46.6.1.50	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber50	1.3.6.1.4.1.6889.2.8.1.46.6.1.51	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber51	1.3.6.1.4.1.6889.2.8.1.46.6.1.52	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber52	1.3.6.1.4.1.6889.2.8.1.46.6.1.53	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber53	1.3.6.1.4.1.6889.2.8.1.46.6.1.54	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber54	1.3.6.1.4.1.6889.2.8.1.46.6.1.55	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber55	1.3.6.1.4.1.6889.2.8.1.46.6.1.56	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber56	1.3.6.1.4.1.6889.2.8.1.46.6.1.57	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber57	1.3.6.1.4.1.6889.2.8.1.46.6.1.58	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber58	1.3.6.1.4.1.6889.2.8.1.46.6.1.59	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber59	1.3.6.1.4.1.6889.2.8.1.46.6.1.60	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber60	1.3.6.1.4.1.6889.2.8.1.46.6.1.61	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber61	1.3.6.1.4.1.6889.2.8.1.46.6.1.62	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber62	1.3.6.1.4.1.6889.2.8.1.46.6.1.63	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber63	1.3.6.1.4.1.6889.2.8.1.46.6.1.64	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber64	1.3.6.1.4.1.6889.2.8.1.46.6.1.65	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber65	1.3.6.1.4.1.6889.2.8.1.46.6.1.66	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber66	1.3.6.1.4.1.6889.2.8.1.46.6.1.67	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber67	1.3.6.1.4.1.6889.2.8.1.46.6.1.68	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber68	1.3.6.1.4.1.6889.2.8.1.46.6.1.69	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber69	1.3.6.1.4.1.6889.2.8.1.46.6.1.70	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber70	1.3.6.1.4.1.6889.2.8.1.46.6.1.71	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber71	1.3.6.1.4.1.6889.2.8.1.46.6.1.72	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber72	1.3.6.1.4.1.6889.2.8.1.46.6.1.73	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber73	1.3.6.1.4.1.6889.2.8.1.46.6.1.74	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber74	1.3.6.1.4.1.6889.2.8.1.46.6.1.75	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber75	1.3.6.1.4.1.6889.2.8.1.46.6.1.76	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber76	1.3.6.1.4.1.6889.2.8.1.46.6.1.77	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber77	1.3.6.1.4.1.6889.2.8.1.46.6.1.78	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber78	1.3.6.1.4.1.6889.2.8.1.46.6.1.79	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber79	1.3.6.1.4.1.6889.2.8.1.46.6.1.80	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber80	1.3.6.1.4.1.6889.2.8.1.46.6.1.81	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber81	1.3.6.1.4.1.6889.2.8.1.46.6.1.82	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber82	1.3.6.1.4.1.6889.2.8.1.46.6.1.83	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber83	1.3.6.1.4.1.6889.2.8.1.46.6.1.84	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber84	1.3.6.1.4.1.6889.2.8.1.46.6.1.85	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber85	1.3.6.1.4.1.6889.2.8.1.46.6.1.86	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber86	1.3.6.1.4.1.6889.2.8.1.46.6.1.87	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber87	1.3.6.1.4.1.6889.2.8.1.46.6.1.88	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber88	1.3.6.1.4.1.6889.2.8.1.46.6.1.89	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber89	1.3.6.1.4.1.6889.2.8.1.46.6.1.90	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1SGNumber90	1.3.6.1.4.1.6889.2.8.1.46.6.1.91	INTEGER	read-only	See DESCRIPTION of g3atmportpg1SGNumber1.
INT g3atmportpg1TGNumber1	1.3.6.1.4.1.6889.2.8.1.46.6.1.92	INTEGER	read-only	An INTEGER Object that uniquely identifies the trunk group associated with the ATM ports (1 to 90) on page 1 of the form.
INT g3atmportpg1TGNumber2	1.3.6.1.4.1.6889.2.8.1.46.6.1.93	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber3	1.3.6.1.4.1.6889.2.8.1.46.6.1.94	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber4	1.3.6.1.4.1.6889.2.8.1.46.6.1.95	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber5	1.3.6.1.4.1.6889.2.8.1.46.6.1.96	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber6	1.3.6.1.4.1.6889.2.8.1.46.6.1.97	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber7	1.3.6.1.4.1.6889.2.8.1.46.6.1.98	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber8	1.3.6.1.4.1.6889.2.8.1.46.6.1.99	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber9	1.3.6.1.4.1.6889.2.8.1.46.6.1.100	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber10	1.3.6.1.4.1.6889.2.8.1.46.6.1.101	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber11	1.3.6.1.4.1.6889.2.8.1.46.6.1.102	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber12	1.3.6.1.4.1.6889.2.8.1.46.6.1.103	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber13	1.3.6.1.4.1.6889.2.8.1.46.6.1.104	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber14	1.3.6.1.4.1.6889.2.8.1.46.6.1.105	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber15	1.3.6.1.4.1.6889.2.8.1.46.6.1.106	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber16	1.3.6.1.4.1.6889.2.8.1.46.6.1.107	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber17	1.3.6.1.4.1.6889.2.8.1.46.6.1.108	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber18	1.3.6.1.4.1.6889.2.8.1.46.6.1.109	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber19	1.3.6.1.4.1.6889.2.8.1.46.6.1.110	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber20	1.3.6.1.4.1.6889.2.8.1.46.6.1.111	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber21	1.3.6.1.4.1.6889.2.8.1.46.6.1.112	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber22	1.3.6.1.4.1.6889.2.8.1.46.6.1.113	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber23	1.3.6.1.4.1.6889.2.8.1.46.6.1.114	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber24	1.3.6.1.4.1.6889.2.8.1.46.6.1.115	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber25	1.3.6.1.4.1.6889.2.8.1.46.6.1.116	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber26	1.3.6.1.4.1.6889.2.8.1.46.6.1.117	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber27	1.3.6.1.4.1.6889.2.8.1.46.6.1.118	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber28	1.3.6.1.4.1.6889.2.8.1.46.6.1.119	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber29	1.3.6.1.4.1.6889.2.8.1.46.6.1.120	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber30	1.3.6.1.4.1.6889.2.8.1.46.6.1.121	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber31	1.3.6.1.4.1.6889.2.8.1.46.6.1.122	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber32	1.3.6.1.4.1.6889.2.8.1.46.6.1.123	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber33	1.3.6.1.4.1.6889.2.8.1.46.6.1.124	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber34	1.3.6.1.4.1.6889.2.8.1.46.6.1.125	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber35	1.3.6.1.4.1.6889.2.8.1.46.6.1.126	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber36	1.3.6.1.4.1.6889.2.8.1.46.6.1.127	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber37	1.3.6.1.4.1.6889.2.8.1.46.6.1.128	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber38	1.3.6.1.4.1.6889.2.8.1.46.6.1.129	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber39	1.3.6.1.4.1.6889.2.8.1.46.6.1.130	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber40	1.3.6.1.4.1.6889.2.8.1.46.6.1.131	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber41	1.3.6.1.4.1.6889.2.8.1.46.6.1.132	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber42	1.3.6.1.4.1.6889.2.8.1.46.6.1.133	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber43	1.3.6.1.4.1.6889.2.8.1.46.6.1.134	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber44	1.3.6.1.4.1.6889.2.8.1.46.6.1.135	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber45	1.3.6.1.4.1.6889.2.8.1.46.6.1.136	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber46	1.3.6.1.4.1.6889.2.8.1.46.6.1.137	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber47	1.3.6.1.4.1.6889.2.8.1.46.6.1.138	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber48	1.3.6.1.4.1.6889.2.8.1.46.6.1.139	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber49	1.3.6.1.4.1.6889.2.8.1.46.6.1.140	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber50	1.3.6.1.4.1.6889.2.8.1.46.6.1.141	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber51	1.3.6.1.4.1.6889.2.8.1.46.6.1.142	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber52	1.3.6.1.4.1.6889.2.8.1.46.6.1.143	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber53	1.3.6.1.4.1.6889.2.8.1.46.6.1.144	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber54	1.3.6.1.4.1.6889.2.8.1.46.6.1.145	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber55	1.3.6.1.4.1.6889.2.8.1.46.6.1.146	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber56	1.3.6.1.4.1.6889.2.8.1.46.6.1.147	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber57	1.3.6.1.4.1.6889.2.8.1.46.6.1.148	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber58	1.3.6.1.4.1.6889.2.8.1.46.6.1.149	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber59	1.3.6.1.4.1.6889.2.8.1.46.6.1.150	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber60	1.3.6.1.4.1.6889.2.8.1.46.6.1.151	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber61	1.3.6.1.4.1.6889.2.8.1.46.6.1.152	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber62	1.3.6.1.4.1.6889.2.8.1.46.6.1.153	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber63	1.3.6.1.4.1.6889.2.8.1.46.6.1.154	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber64	1.3.6.1.4.1.6889.2.8.1.46.6.1.155	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber65	1.3.6.1.4.1.6889.2.8.1.46.6.1.156	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber66	1.3.6.1.4.1.6889.2.8.1.46.6.1.157	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber67	1.3.6.1.4.1.6889.2.8.1.46.6.1.158	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber68	1.3.6.1.4.1.6889.2.8.1.46.6.1.159	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber69	1.3.6.1.4.1.6889.2.8.1.46.6.1.160	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber70	1.3.6.1.4.1.6889.2.8.1.46.6.1.161	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber71	1.3.6.1.4.1.6889.2.8.1.46.6.1.162	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber72	1.3.6.1.4.1.6889.2.8.1.46.6.1.163	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber73	1.3.6.1.4.1.6889.2.8.1.46.6.1.164	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber74	1.3.6.1.4.1.6889.2.8.1.46.6.1.165	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber75	1.3.6.1.4.1.6889.2.8.1.46.6.1.166	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber76	1.3.6.1.4.1.6889.2.8.1.46.6.1.167	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber77	1.3.6.1.4.1.6889.2.8.1.46.6.1.168	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber78	1.3.6.1.4.1.6889.2.8.1.46.6.1.169	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber79	1.3.6.1.4.1.6889.2.8.1.46.6.1.170	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber80	1.3.6.1.4.1.6889.2.8.1.46.6.1.171	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber81	1.3.6.1.4.1.6889.2.8.1.46.6.1.172	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber82	1.3.6.1.4.1.6889.2.8.1.46.6.1.173	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber83	1.3.6.1.4.1.6889.2.8.1.46.6.1.174	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber84	1.3.6.1.4.1.6889.2.8.1.46.6.1.175	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber85	1.3.6.1.4.1.6889.2.8.1.46.6.1.176	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber86	1.3.6.1.4.1.6889.2.8.1.46.6.1.177	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber87	1.3.6.1.4.1.6889.2.8.1.46.6.1.178	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber88	1.3.6.1.4.1.6889.2.8.1.46.6.1.179	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber89	1.3.6.1.4.1.6889.2.8.1.46.6.1.180	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
INT g3atmportpg1TGNumber90	1.3.6.1.4.1.6889.2.8.1.46.6.1.181	INTEGER	read-only	See DESCRIPTION of g3atmportpg1TGNumber1.
g3atmportpg2	1.3.6.1.4.1.6889.2.8.1.47
INT g3atmportpg2Tage	1.3.6.1.4.1.6889.2.8.1.47.1	INTEGER	read-only	The number of timeticks since the atm port data was extracted from the switch by the G3 Proxy Agent. This object along with the g3atmportpg2Tintvl object allows the Network Manager to determine the validity of the atm port data in the cache and to control when the proxy agent extracts the atm port data from the switch.
INT g3atmportpg2Tintvl	1.3.6.1.4.1.6889.2.8.1.47.2	INTEGER	read-write	An object containing the interval for which the atm port data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for atm port data objects is received by the agent it Uses the g3atmportpg2Tage and g3atmportpg2Tintvl objects to determine whether it should refresh the cached atmportpg2Table. If g3atmportpg2Tstmp + g3atmportpg2Tintvl is less than the current value of the sysUpTime object then the agent refreshes the atmportpg2Table cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3atmportpg2Tdelay	1.3.6.1.4.1.6889.2.8.1.47.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data
INT g3atmportpg2Tretrieve	1.3.6.1.4.1.6889.2.8.1.47.4	INTEGER	read-write	An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3atmportpg2Tcount	1.3.6.1.4.1.6889.2.8.1.47.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3atmportpg2Table	1.3.6.1.4.1.6889.2.8.1.47.6		not-accessible	A list of g3atmportpg2 entries.
g3atmportpg2Entry	1.3.6.1.4.1.6889.2.8.1.47.6.1		not-accessible	A g3atmportpg2 entry containing objects of the g3atmportpg2 information sent by the switch.
STR g3atmportpg2Location	1.3.6.1.4.1.6889.2.8.1.47.6.1.1	DisplayString	read-only	A DisplayString Object that uniquely identifies the ATM trunk board based on its location in the system. The syntax for the Board Number is as follows: cabinet(01-44):carrier(A-E):slot(01-20).
INT g3atmportpg2SGNumber91	1.3.6.1.4.1.6889.2.8.1.47.6.1.2	INTEGER	read-only	An INTEGER Object that uniquely identifies the signaling group associated with the ATM ports (91 to 180) on page 2 of the form.
INT g3atmportpg2SGNumber92	1.3.6.1.4.1.6889.2.8.1.47.6.1.3	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber93	1.3.6.1.4.1.6889.2.8.1.47.6.1.4	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber94	1.3.6.1.4.1.6889.2.8.1.47.6.1.5	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber95	1.3.6.1.4.1.6889.2.8.1.47.6.1.6	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber96	1.3.6.1.4.1.6889.2.8.1.47.6.1.7	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber97	1.3.6.1.4.1.6889.2.8.1.47.6.1.8	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber98	1.3.6.1.4.1.6889.2.8.1.47.6.1.9	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber99	1.3.6.1.4.1.6889.2.8.1.47.6.1.10	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber100	1.3.6.1.4.1.6889.2.8.1.47.6.1.11	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber101	1.3.6.1.4.1.6889.2.8.1.47.6.1.12	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber102	1.3.6.1.4.1.6889.2.8.1.47.6.1.13	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber103	1.3.6.1.4.1.6889.2.8.1.47.6.1.14	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber104	1.3.6.1.4.1.6889.2.8.1.47.6.1.15	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber105	1.3.6.1.4.1.6889.2.8.1.47.6.1.16	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber106	1.3.6.1.4.1.6889.2.8.1.47.6.1.17	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber107	1.3.6.1.4.1.6889.2.8.1.47.6.1.18	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber108	1.3.6.1.4.1.6889.2.8.1.47.6.1.19	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber109	1.3.6.1.4.1.6889.2.8.1.47.6.1.20	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber110	1.3.6.1.4.1.6889.2.8.1.47.6.1.21	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber111	1.3.6.1.4.1.6889.2.8.1.47.6.1.22	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber112	1.3.6.1.4.1.6889.2.8.1.47.6.1.23	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber113	1.3.6.1.4.1.6889.2.8.1.47.6.1.24	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber114	1.3.6.1.4.1.6889.2.8.1.47.6.1.25	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber115	1.3.6.1.4.1.6889.2.8.1.47.6.1.26	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber116	1.3.6.1.4.1.6889.2.8.1.47.6.1.27	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber117	1.3.6.1.4.1.6889.2.8.1.47.6.1.28	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber118	1.3.6.1.4.1.6889.2.8.1.47.6.1.29	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber119	1.3.6.1.4.1.6889.2.8.1.47.6.1.30	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber120	1.3.6.1.4.1.6889.2.8.1.47.6.1.31	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber121	1.3.6.1.4.1.6889.2.8.1.47.6.1.32	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber122	1.3.6.1.4.1.6889.2.8.1.47.6.1.33	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber123	1.3.6.1.4.1.6889.2.8.1.47.6.1.34	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber124	1.3.6.1.4.1.6889.2.8.1.47.6.1.35	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber125	1.3.6.1.4.1.6889.2.8.1.47.6.1.36	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber126	1.3.6.1.4.1.6889.2.8.1.47.6.1.37	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber127	1.3.6.1.4.1.6889.2.8.1.47.6.1.38	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber128	1.3.6.1.4.1.6889.2.8.1.47.6.1.39	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber129	1.3.6.1.4.1.6889.2.8.1.47.6.1.40	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber130	1.3.6.1.4.1.6889.2.8.1.47.6.1.41	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber131	1.3.6.1.4.1.6889.2.8.1.47.6.1.42	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber132	1.3.6.1.4.1.6889.2.8.1.47.6.1.43	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber133	1.3.6.1.4.1.6889.2.8.1.47.6.1.44	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber134	1.3.6.1.4.1.6889.2.8.1.47.6.1.45	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber135	1.3.6.1.4.1.6889.2.8.1.47.6.1.46	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber136	1.3.6.1.4.1.6889.2.8.1.47.6.1.47	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber137	1.3.6.1.4.1.6889.2.8.1.47.6.1.48	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber138	1.3.6.1.4.1.6889.2.8.1.47.6.1.49	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber139	1.3.6.1.4.1.6889.2.8.1.47.6.1.50	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber140	1.3.6.1.4.1.6889.2.8.1.47.6.1.51	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber141	1.3.6.1.4.1.6889.2.8.1.47.6.1.52	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber142	1.3.6.1.4.1.6889.2.8.1.47.6.1.53	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber143	1.3.6.1.4.1.6889.2.8.1.47.6.1.54	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber144	1.3.6.1.4.1.6889.2.8.1.47.6.1.55	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber145	1.3.6.1.4.1.6889.2.8.1.47.6.1.56	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber146	1.3.6.1.4.1.6889.2.8.1.47.6.1.57	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber147	1.3.6.1.4.1.6889.2.8.1.47.6.1.58	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber148	1.3.6.1.4.1.6889.2.8.1.47.6.1.59	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber149	1.3.6.1.4.1.6889.2.8.1.47.6.1.60	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber150	1.3.6.1.4.1.6889.2.8.1.47.6.1.61	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber151	1.3.6.1.4.1.6889.2.8.1.47.6.1.62	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber152	1.3.6.1.4.1.6889.2.8.1.47.6.1.63	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber153	1.3.6.1.4.1.6889.2.8.1.47.6.1.64	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber154	1.3.6.1.4.1.6889.2.8.1.47.6.1.65	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber155	1.3.6.1.4.1.6889.2.8.1.47.6.1.66	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber156	1.3.6.1.4.1.6889.2.8.1.47.6.1.67	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber157	1.3.6.1.4.1.6889.2.8.1.47.6.1.68	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber158	1.3.6.1.4.1.6889.2.8.1.47.6.1.69	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber159	1.3.6.1.4.1.6889.2.8.1.47.6.1.70	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber160	1.3.6.1.4.1.6889.2.8.1.47.6.1.71	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber161	1.3.6.1.4.1.6889.2.8.1.47.6.1.72	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber162	1.3.6.1.4.1.6889.2.8.1.47.6.1.73	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber163	1.3.6.1.4.1.6889.2.8.1.47.6.1.74	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber164	1.3.6.1.4.1.6889.2.8.1.47.6.1.75	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber165	1.3.6.1.4.1.6889.2.8.1.47.6.1.76	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber166	1.3.6.1.4.1.6889.2.8.1.47.6.1.77	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber167	1.3.6.1.4.1.6889.2.8.1.47.6.1.78	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber168	1.3.6.1.4.1.6889.2.8.1.47.6.1.79	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber169	1.3.6.1.4.1.6889.2.8.1.47.6.1.80	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber170	1.3.6.1.4.1.6889.2.8.1.47.6.1.81	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber171	1.3.6.1.4.1.6889.2.8.1.47.6.1.82	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber172	1.3.6.1.4.1.6889.2.8.1.47.6.1.83	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber173	1.3.6.1.4.1.6889.2.8.1.47.6.1.84	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber174	1.3.6.1.4.1.6889.2.8.1.47.6.1.85	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber175	1.3.6.1.4.1.6889.2.8.1.47.6.1.86	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber176	1.3.6.1.4.1.6889.2.8.1.47.6.1.87	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber177	1.3.6.1.4.1.6889.2.8.1.47.6.1.88	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber178	1.3.6.1.4.1.6889.2.8.1.47.6.1.89	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber179	1.3.6.1.4.1.6889.2.8.1.47.6.1.90	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2SGNumber180	1.3.6.1.4.1.6889.2.8.1.47.6.1.91	INTEGER	read-only	See DESCRIPTION of g3atmportpg2SGNumber91.
INT g3atmportpg2TGNumber91	1.3.6.1.4.1.6889.2.8.1.47.6.1.92	INTEGER	read-only	An INTEGER Object that uniquely identifies the trunk group associated with the ATM ports (91 to 180) on page 2 of the form.
INT g3atmportpg2TGNumber92	1.3.6.1.4.1.6889.2.8.1.47.6.1.93	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber93	1.3.6.1.4.1.6889.2.8.1.47.6.1.94	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber94	1.3.6.1.4.1.6889.2.8.1.47.6.1.95	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber95	1.3.6.1.4.1.6889.2.8.1.47.6.1.96	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber96	1.3.6.1.4.1.6889.2.8.1.47.6.1.97	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber97	1.3.6.1.4.1.6889.2.8.1.47.6.1.98	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber98	1.3.6.1.4.1.6889.2.8.1.47.6.1.99	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber99	1.3.6.1.4.1.6889.2.8.1.47.6.1.100	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber100	1.3.6.1.4.1.6889.2.8.1.47.6.1.101	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber101	1.3.6.1.4.1.6889.2.8.1.47.6.1.102	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber102	1.3.6.1.4.1.6889.2.8.1.47.6.1.103	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber103	1.3.6.1.4.1.6889.2.8.1.47.6.1.104	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber104	1.3.6.1.4.1.6889.2.8.1.47.6.1.105	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber105	1.3.6.1.4.1.6889.2.8.1.47.6.1.106	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber106	1.3.6.1.4.1.6889.2.8.1.47.6.1.107	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber107	1.3.6.1.4.1.6889.2.8.1.47.6.1.108	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber108	1.3.6.1.4.1.6889.2.8.1.47.6.1.109	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber109	1.3.6.1.4.1.6889.2.8.1.47.6.1.110	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber110	1.3.6.1.4.1.6889.2.8.1.47.6.1.111	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber111	1.3.6.1.4.1.6889.2.8.1.47.6.1.112	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber112	1.3.6.1.4.1.6889.2.8.1.47.6.1.113	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber113	1.3.6.1.4.1.6889.2.8.1.47.6.1.114	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber114	1.3.6.1.4.1.6889.2.8.1.47.6.1.115	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber115	1.3.6.1.4.1.6889.2.8.1.47.6.1.116	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber116	1.3.6.1.4.1.6889.2.8.1.47.6.1.117	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber117	1.3.6.1.4.1.6889.2.8.1.47.6.1.118	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber118	1.3.6.1.4.1.6889.2.8.1.47.6.1.119	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber119	1.3.6.1.4.1.6889.2.8.1.47.6.1.120	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber120	1.3.6.1.4.1.6889.2.8.1.47.6.1.121	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber121	1.3.6.1.4.1.6889.2.8.1.47.6.1.122	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber122	1.3.6.1.4.1.6889.2.8.1.47.6.1.123	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber123	1.3.6.1.4.1.6889.2.8.1.47.6.1.124	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber124	1.3.6.1.4.1.6889.2.8.1.47.6.1.125	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber125	1.3.6.1.4.1.6889.2.8.1.47.6.1.126	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber126	1.3.6.1.4.1.6889.2.8.1.47.6.1.127	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber127	1.3.6.1.4.1.6889.2.8.1.47.6.1.128	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber128	1.3.6.1.4.1.6889.2.8.1.47.6.1.129	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber129	1.3.6.1.4.1.6889.2.8.1.47.6.1.130	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber130	1.3.6.1.4.1.6889.2.8.1.47.6.1.131	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber131	1.3.6.1.4.1.6889.2.8.1.47.6.1.132	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber132	1.3.6.1.4.1.6889.2.8.1.47.6.1.133	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber133	1.3.6.1.4.1.6889.2.8.1.47.6.1.134	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber134	1.3.6.1.4.1.6889.2.8.1.47.6.1.135	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber135	1.3.6.1.4.1.6889.2.8.1.47.6.1.136	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber136	1.3.6.1.4.1.6889.2.8.1.47.6.1.137	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber137	1.3.6.1.4.1.6889.2.8.1.47.6.1.138	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber138	1.3.6.1.4.1.6889.2.8.1.47.6.1.139	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber139	1.3.6.1.4.1.6889.2.8.1.47.6.1.140	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber140	1.3.6.1.4.1.6889.2.8.1.47.6.1.141	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber141	1.3.6.1.4.1.6889.2.8.1.47.6.1.142	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber142	1.3.6.1.4.1.6889.2.8.1.47.6.1.143	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber143	1.3.6.1.4.1.6889.2.8.1.47.6.1.144	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber144	1.3.6.1.4.1.6889.2.8.1.47.6.1.145	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber145	1.3.6.1.4.1.6889.2.8.1.47.6.1.146	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber146	1.3.6.1.4.1.6889.2.8.1.47.6.1.147	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber147	1.3.6.1.4.1.6889.2.8.1.47.6.1.148	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber148	1.3.6.1.4.1.6889.2.8.1.47.6.1.149	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber149	1.3.6.1.4.1.6889.2.8.1.47.6.1.150	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber150	1.3.6.1.4.1.6889.2.8.1.47.6.1.151	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber151	1.3.6.1.4.1.6889.2.8.1.47.6.1.152	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber152	1.3.6.1.4.1.6889.2.8.1.47.6.1.153	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber153	1.3.6.1.4.1.6889.2.8.1.47.6.1.154	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber154	1.3.6.1.4.1.6889.2.8.1.47.6.1.155	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber155	1.3.6.1.4.1.6889.2.8.1.47.6.1.156	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber156	1.3.6.1.4.1.6889.2.8.1.47.6.1.157	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber157	1.3.6.1.4.1.6889.2.8.1.47.6.1.158	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber158	1.3.6.1.4.1.6889.2.8.1.47.6.1.159	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber159	1.3.6.1.4.1.6889.2.8.1.47.6.1.160	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber160	1.3.6.1.4.1.6889.2.8.1.47.6.1.161	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber161	1.3.6.1.4.1.6889.2.8.1.47.6.1.162	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber162	1.3.6.1.4.1.6889.2.8.1.47.6.1.163	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber163	1.3.6.1.4.1.6889.2.8.1.47.6.1.164	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber164	1.3.6.1.4.1.6889.2.8.1.47.6.1.165	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber165	1.3.6.1.4.1.6889.2.8.1.47.6.1.166	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber166	1.3.6.1.4.1.6889.2.8.1.47.6.1.167	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber167	1.3.6.1.4.1.6889.2.8.1.47.6.1.168	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber168	1.3.6.1.4.1.6889.2.8.1.47.6.1.169	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber169	1.3.6.1.4.1.6889.2.8.1.47.6.1.170	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber170	1.3.6.1.4.1.6889.2.8.1.47.6.1.171	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber171	1.3.6.1.4.1.6889.2.8.1.47.6.1.172	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber172	1.3.6.1.4.1.6889.2.8.1.47.6.1.173	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber173	1.3.6.1.4.1.6889.2.8.1.47.6.1.174	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber174	1.3.6.1.4.1.6889.2.8.1.47.6.1.175	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber175	1.3.6.1.4.1.6889.2.8.1.47.6.1.176	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber176	1.3.6.1.4.1.6889.2.8.1.47.6.1.177	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber177	1.3.6.1.4.1.6889.2.8.1.47.6.1.178	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber178	1.3.6.1.4.1.6889.2.8.1.47.6.1.179	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber179	1.3.6.1.4.1.6889.2.8.1.47.6.1.180	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
INT g3atmportpg2TGNumber180	1.3.6.1.4.1.6889.2.8.1.47.6.1.181	INTEGER	read-only	See DESCRIPTION of g3atmportpg2TGNumber91.
g3atmportpg3	1.3.6.1.4.1.6889.2.8.1.48
INT g3atmportpg3Tage	1.3.6.1.4.1.6889.2.8.1.48.1	INTEGER	read-only	The number of timeticks since the atm port data was extracted from the switch by the G3 Proxy Agent. This object along with the g3atmportpg3Tintvl object allows the Network Manager to determine the validity of the atm port data in the cache and to control when the proxy agent extracts the atm port data from the switch.
INT g3atmportpg3Tintvl	1.3.6.1.4.1.6889.2.8.1.48.2	INTEGER	read-write	An object containing the interval for which the atm port data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for atm port data objects is received by the agent it uses the g3atmportpg3Tage and g3atmportpg3Tintvl objects to determine whether it should refresh the cached atmportpg3Table. If g3atmportpg3Tstmp + g3atmportpg3Tintvl is less than the current value of the sysUpTime object then the agent refreshes the atmportpg3Table cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3atmportpg3Tdelay	1.3.6.1.4.1.6889.2.8.1.48.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data
INT g3atmportpg3Tretrieve	1.3.6.1.4.1.6889.2.8.1.48.4	INTEGER	read-write	An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3atmportpg3Tcount	1.3.6.1.4.1.6889.2.8.1.48.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3atmportpg3Table	1.3.6.1.4.1.6889.2.8.1.48.6		not-accessible	A list of g3atmportpg3 entries.
g3atmportpg3Entry	1.3.6.1.4.1.6889.2.8.1.48.6.1		not-accessible	A g3atmportpg3 entry containing objects of the g3atmportpg3 information sent by the switch.
STR g3atmportpg3Location	1.3.6.1.4.1.6889.2.8.1.48.6.1.1	DisplayString	read-only	A DisplayString Object that uniquely identifies the ATM trunk board based on its location in the system. The syntax for the Board Number is as follows: cabinet(01-44):carrier(A-E):slot(01-20).
INT g3atmportpg3SGNumber181	1.3.6.1.4.1.6889.2.8.1.48.6.1.2	INTEGER	read-only	An INTEGER Object that uniquely identifies the signaling group associated with the ATM ports (181 to 244) on page 3 of the form.
INT g3atmportpg3SGNumber182	1.3.6.1.4.1.6889.2.8.1.48.6.1.3	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber183	1.3.6.1.4.1.6889.2.8.1.48.6.1.4	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber184	1.3.6.1.4.1.6889.2.8.1.48.6.1.5	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber185	1.3.6.1.4.1.6889.2.8.1.48.6.1.6	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber186	1.3.6.1.4.1.6889.2.8.1.48.6.1.7	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber187	1.3.6.1.4.1.6889.2.8.1.48.6.1.8	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber188	1.3.6.1.4.1.6889.2.8.1.48.6.1.9	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber189	1.3.6.1.4.1.6889.2.8.1.48.6.1.10	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber190	1.3.6.1.4.1.6889.2.8.1.48.6.1.11	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber191	1.3.6.1.4.1.6889.2.8.1.48.6.1.12	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber192	1.3.6.1.4.1.6889.2.8.1.48.6.1.13	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber193	1.3.6.1.4.1.6889.2.8.1.48.6.1.14	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber194	1.3.6.1.4.1.6889.2.8.1.48.6.1.15	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber195	1.3.6.1.4.1.6889.2.8.1.48.6.1.16	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber196	1.3.6.1.4.1.6889.2.8.1.48.6.1.17	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber197	1.3.6.1.4.1.6889.2.8.1.48.6.1.18	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber198	1.3.6.1.4.1.6889.2.8.1.48.6.1.19	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber199	1.3.6.1.4.1.6889.2.8.1.48.6.1.20	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber200	1.3.6.1.4.1.6889.2.8.1.48.6.1.21	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber201	1.3.6.1.4.1.6889.2.8.1.48.6.1.22	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber202	1.3.6.1.4.1.6889.2.8.1.48.6.1.23	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber203	1.3.6.1.4.1.6889.2.8.1.48.6.1.24	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber204	1.3.6.1.4.1.6889.2.8.1.48.6.1.25	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber205	1.3.6.1.4.1.6889.2.8.1.48.6.1.26	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber206	1.3.6.1.4.1.6889.2.8.1.48.6.1.27	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber207	1.3.6.1.4.1.6889.2.8.1.48.6.1.28	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber208	1.3.6.1.4.1.6889.2.8.1.48.6.1.29	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber209	1.3.6.1.4.1.6889.2.8.1.48.6.1.30	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber210	1.3.6.1.4.1.6889.2.8.1.48.6.1.31	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber211	1.3.6.1.4.1.6889.2.8.1.48.6.1.32	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber212	1.3.6.1.4.1.6889.2.8.1.48.6.1.33	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber213	1.3.6.1.4.1.6889.2.8.1.48.6.1.34	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber214	1.3.6.1.4.1.6889.2.8.1.48.6.1.35	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber215	1.3.6.1.4.1.6889.2.8.1.48.6.1.36	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber216	1.3.6.1.4.1.6889.2.8.1.48.6.1.37	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber217	1.3.6.1.4.1.6889.2.8.1.48.6.1.38	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber218	1.3.6.1.4.1.6889.2.8.1.48.6.1.39	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber219	1.3.6.1.4.1.6889.2.8.1.48.6.1.40	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber220	1.3.6.1.4.1.6889.2.8.1.48.6.1.41	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber221	1.3.6.1.4.1.6889.2.8.1.48.6.1.42	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber222	1.3.6.1.4.1.6889.2.8.1.48.6.1.43	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber223	1.3.6.1.4.1.6889.2.8.1.48.6.1.44	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber224	1.3.6.1.4.1.6889.2.8.1.48.6.1.45	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber225	1.3.6.1.4.1.6889.2.8.1.48.6.1.46	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber226	1.3.6.1.4.1.6889.2.8.1.48.6.1.47	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber227	1.3.6.1.4.1.6889.2.8.1.48.6.1.48	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber228	1.3.6.1.4.1.6889.2.8.1.48.6.1.49	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber229	1.3.6.1.4.1.6889.2.8.1.48.6.1.50	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber230	1.3.6.1.4.1.6889.2.8.1.48.6.1.51	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber231	1.3.6.1.4.1.6889.2.8.1.48.6.1.52	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber232	1.3.6.1.4.1.6889.2.8.1.48.6.1.53	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber233	1.3.6.1.4.1.6889.2.8.1.48.6.1.54	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber234	1.3.6.1.4.1.6889.2.8.1.48.6.1.55	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber235	1.3.6.1.4.1.6889.2.8.1.48.6.1.56	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber236	1.3.6.1.4.1.6889.2.8.1.48.6.1.57	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber237	1.3.6.1.4.1.6889.2.8.1.48.6.1.58	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber238	1.3.6.1.4.1.6889.2.8.1.48.6.1.59	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber239	1.3.6.1.4.1.6889.2.8.1.48.6.1.60	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber240	1.3.6.1.4.1.6889.2.8.1.48.6.1.61	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber241	1.3.6.1.4.1.6889.2.8.1.48.6.1.62	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber242	1.3.6.1.4.1.6889.2.8.1.48.6.1.63	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber243	1.3.6.1.4.1.6889.2.8.1.48.6.1.64	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber244	1.3.6.1.4.1.6889.2.8.1.48.6.1.65	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3SGNumber245	1.3.6.1.4.1.6889.2.8.1.48.6.1.66	INTEGER	read-only	See DESCRIPTION of g3atmportpg3SGNumber181.
INT g3atmportpg3LSGNumber1	1.3.6.1.4.1.6889.2.8.1.48.6.1.67	INTEGER	read-only	An INTEGER Object that uniquely identifies the signaling group associated with the ATM ports (245 to 256) on page 3 of the form. The FIDs changed due to DEFINITY constraints.
INT g3atmportpg3LSGNumber2	1.3.6.1.4.1.6889.2.8.1.48.6.1.68	INTEGER	read-only	See DESCRIPTION of g3atmportpg3LSGNumber1.
INT g3atmportpg3LSGNumber3	1.3.6.1.4.1.6889.2.8.1.48.6.1.69	INTEGER	read-only	See DESCRIPTION of g3atmportpg3LSGNumber1.
INT g3atmportpg3LSGNumber4	1.3.6.1.4.1.6889.2.8.1.48.6.1.70	INTEGER	read-only	See DESCRIPTION of g3atmportpg3LSGNumber1.
INT g3atmportpg3LSGNumber5	1.3.6.1.4.1.6889.2.8.1.48.6.1.71	INTEGER	read-only	See DESCRIPTION of g3atmportpg3LSGNumber1.
INT g3atmportpg3LSGNumber6	1.3.6.1.4.1.6889.2.8.1.48.6.1.72	INTEGER	read-only	See DESCRIPTION of g3atmportpg3LSGNumber1.
INT g3atmportpg3LSGNumber7	1.3.6.1.4.1.6889.2.8.1.48.6.1.73	INTEGER	read-only	See DESCRIPTION of g3atmportpg3LSGNumber1.
INT g3atmportpg3LSGNumber8	1.3.6.1.4.1.6889.2.8.1.48.6.1.74	INTEGER	read-only	See DESCRIPTION of g3atmportpg3LSGNumber1.
INT g3atmportpg3LSGNumber9	1.3.6.1.4.1.6889.2.8.1.48.6.1.75	INTEGER	read-only	See DESCRIPTION of g3atmportpg3LSGNumber1.
INT g3atmportpg3LSGNumber10	1.3.6.1.4.1.6889.2.8.1.48.6.1.76	INTEGER	read-only	See DESCRIPTION of g3atmportpg3LSGNumber1.
INT g3atmportpg3LSGNumber11	1.3.6.1.4.1.6889.2.8.1.48.6.1.77	INTEGER	read-only	See DESCRIPTION of g3atmportpg3LSGNumber1.
INT g3atmportpg3TGNumber181	1.3.6.1.4.1.6889.2.8.1.48.6.1.78	INTEGER	read-only	An INTEGER Object that uniquely identifies the trunk group associated with the ATM ports (181 to 244) on page 3 of the form.
INT g3atmportpg3TGNumber182	1.3.6.1.4.1.6889.2.8.1.48.6.1.79	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber183	1.3.6.1.4.1.6889.2.8.1.48.6.1.80	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber184	1.3.6.1.4.1.6889.2.8.1.48.6.1.81	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber185	1.3.6.1.4.1.6889.2.8.1.48.6.1.82	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber186	1.3.6.1.4.1.6889.2.8.1.48.6.1.83	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber187	1.3.6.1.4.1.6889.2.8.1.48.6.1.84	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber188	1.3.6.1.4.1.6889.2.8.1.48.6.1.85	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber189	1.3.6.1.4.1.6889.2.8.1.48.6.1.86	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber190	1.3.6.1.4.1.6889.2.8.1.48.6.1.87	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber191	1.3.6.1.4.1.6889.2.8.1.48.6.1.88	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber192	1.3.6.1.4.1.6889.2.8.1.48.6.1.89	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber193	1.3.6.1.4.1.6889.2.8.1.48.6.1.90	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber194	1.3.6.1.4.1.6889.2.8.1.48.6.1.91	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber195	1.3.6.1.4.1.6889.2.8.1.48.6.1.92	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber196	1.3.6.1.4.1.6889.2.8.1.48.6.1.93	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber197	1.3.6.1.4.1.6889.2.8.1.48.6.1.94	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber198	1.3.6.1.4.1.6889.2.8.1.48.6.1.95	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber199	1.3.6.1.4.1.6889.2.8.1.48.6.1.96	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber200	1.3.6.1.4.1.6889.2.8.1.48.6.1.97	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber201	1.3.6.1.4.1.6889.2.8.1.48.6.1.98	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber202	1.3.6.1.4.1.6889.2.8.1.48.6.1.99	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber203	1.3.6.1.4.1.6889.2.8.1.48.6.1.100	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber204	1.3.6.1.4.1.6889.2.8.1.48.6.1.101	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber205	1.3.6.1.4.1.6889.2.8.1.48.6.1.102	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber206	1.3.6.1.4.1.6889.2.8.1.48.6.1.103	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber207	1.3.6.1.4.1.6889.2.8.1.48.6.1.104	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber208	1.3.6.1.4.1.6889.2.8.1.48.6.1.105	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber209	1.3.6.1.4.1.6889.2.8.1.48.6.1.106	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber210	1.3.6.1.4.1.6889.2.8.1.48.6.1.107	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber211	1.3.6.1.4.1.6889.2.8.1.48.6.1.108	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber212	1.3.6.1.4.1.6889.2.8.1.48.6.1.109	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber213	1.3.6.1.4.1.6889.2.8.1.48.6.1.110	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber214	1.3.6.1.4.1.6889.2.8.1.48.6.1.111	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber215	1.3.6.1.4.1.6889.2.8.1.48.6.1.112	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber216	1.3.6.1.4.1.6889.2.8.1.48.6.1.113	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber217	1.3.6.1.4.1.6889.2.8.1.48.6.1.114	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber218	1.3.6.1.4.1.6889.2.8.1.48.6.1.115	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber219	1.3.6.1.4.1.6889.2.8.1.48.6.1.116	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber220	1.3.6.1.4.1.6889.2.8.1.48.6.1.117	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber221	1.3.6.1.4.1.6889.2.8.1.48.6.1.118	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber222	1.3.6.1.4.1.6889.2.8.1.48.6.1.119	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber223	1.3.6.1.4.1.6889.2.8.1.48.6.1.120	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber224	1.3.6.1.4.1.6889.2.8.1.48.6.1.121	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber225	1.3.6.1.4.1.6889.2.8.1.48.6.1.122	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber226	1.3.6.1.4.1.6889.2.8.1.48.6.1.123	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber227	1.3.6.1.4.1.6889.2.8.1.48.6.1.124	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber228	1.3.6.1.4.1.6889.2.8.1.48.6.1.125	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber229	1.3.6.1.4.1.6889.2.8.1.48.6.1.126	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber230	1.3.6.1.4.1.6889.2.8.1.48.6.1.127	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber231	1.3.6.1.4.1.6889.2.8.1.48.6.1.128	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber232	1.3.6.1.4.1.6889.2.8.1.48.6.1.129	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber233	1.3.6.1.4.1.6889.2.8.1.48.6.1.130	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber234	1.3.6.1.4.1.6889.2.8.1.48.6.1.131	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber235	1.3.6.1.4.1.6889.2.8.1.48.6.1.132	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber236	1.3.6.1.4.1.6889.2.8.1.48.6.1.133	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber237	1.3.6.1.4.1.6889.2.8.1.48.6.1.134	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber238	1.3.6.1.4.1.6889.2.8.1.48.6.1.135	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber239	1.3.6.1.4.1.6889.2.8.1.48.6.1.136	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber240	1.3.6.1.4.1.6889.2.8.1.48.6.1.137	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber241	1.3.6.1.4.1.6889.2.8.1.48.6.1.138	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber242	1.3.6.1.4.1.6889.2.8.1.48.6.1.139	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber243	1.3.6.1.4.1.6889.2.8.1.48.6.1.140	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber244	1.3.6.1.4.1.6889.2.8.1.48.6.1.141	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3TGNumber245	1.3.6.1.4.1.6889.2.8.1.48.6.1.142	INTEGER	read-only	See DESCRIPTION of g3atmportpg3TGNumber181.
INT g3atmportpg3LTGNumber1	1.3.6.1.4.1.6889.2.8.1.48.6.1.143	INTEGER	read-only	An INTEGER Object that uniquely identifies the trunk group associated with the ATM ports (245 to 256) on page 3 of the form. The FIDs changed due to DEFINITY constraints.
INT g3atmportpg3LTGNumber2	1.3.6.1.4.1.6889.2.8.1.48.6.1.144	INTEGER	read-only	See DESCRIPTION of g3atmportpg3LTGNumber1.
INT g3atmportpg3LTGNumber3	1.3.6.1.4.1.6889.2.8.1.48.6.1.145	INTEGER	read-only	See DESCRIPTION of g3atmportpg3LTGNumber1.
INT g3atmportpg3LTGNumber4	1.3.6.1.4.1.6889.2.8.1.48.6.1.146	INTEGER	read-only	See DESCRIPTION of g3atmportpg3LTGNumber1.
INT g3atmportpg3LTGNumber5	1.3.6.1.4.1.6889.2.8.1.48.6.1.147	INTEGER	read-only	See DESCRIPTION of g3atmportpg3LTGNumber1.
INT g3atmportpg3LTGNumber6	1.3.6.1.4.1.6889.2.8.1.48.6.1.148	INTEGER	read-only	See DESCRIPTION of g3atmportpg3LTGNumber1.
INT g3atmportpg3LTGNumber7	1.3.6.1.4.1.6889.2.8.1.48.6.1.149	INTEGER	read-only	See DESCRIPTION of g3atmportpg3LTGNumber1.
INT g3atmportpg3LTGNumber8	1.3.6.1.4.1.6889.2.8.1.48.6.1.150	INTEGER	read-only	See DESCRIPTION of g3atmportpg3LTGNumber1.
INT g3atmportpg3LTGNumber9	1.3.6.1.4.1.6889.2.8.1.48.6.1.151	INTEGER	read-only	See DESCRIPTION of g3atmportpg3LTGNumber1.
INT g3atmportpg3LTGNumber10	1.3.6.1.4.1.6889.2.8.1.48.6.1.152	INTEGER	read-only	See DESCRIPTION of g3atmportpg3LTGNumber1.
INT g3atmportpg3LTGNumber11	1.3.6.1.4.1.6889.2.8.1.48.6.1.153	INTEGER	read-only	See DESCRIPTION of g3atmportpg3LTGNumber1.
g3dmodule	1.3.6.1.4.1.6889.2.8.1.49
INT g3dmoduleTage	1.3.6.1.4.1.6889.2.8.1.49.1	INTEGER	read-only	The number of timeticks since the data-module data was last extracted from the switch by the Proxy Agent. This object along with the g3dmoduleintvl object allows the Network Manager to determine the validity of the data-module data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3dmoduleTintvl	1.3.6.1.4.1.6889.2.8.1.49.2	INTEGER	read-write	An object containing the interval for which the data-module data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these data-module data objects is received by the agent it uses the g3dmoduleage and g3dmoduleintvl objects to determine whether it should refresh the cached dmoduleTable. If g3dmodulestmp + g3dmoduleintvl is less than the current value of the sysUpTime object then the agent refreshes the dmoduleTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3dmoduleTdelay	1.3.6.1.4.1.6889.2.8.1.49.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3dmoduleTretrieve	1.3.6.1.4.1.6889.2.8.1.49.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3dmoduleTcount	1.3.6.1.4.1.6889.2.8.1.49.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3dmoduleTable	1.3.6.1.4.1.6889.2.8.1.49.6		not-accessible	A list of g3dmodule entries.
g3dmoduleEntry	1.3.6.1.4.1.6889.2.8.1.49.6.1		not-accessible	A g3dmodule entry containing objects of the g3dmodule information sent by the switch.
STR g3dmoduleExtension	1.3.6.1.4.1.6889.2.8.1.49.6.1.1	DisplayString	read-only	A DisplayString Object that uniquely identifies an administered data module.
STR g3dmoduleType	1.3.6.1.4.1.6889.2.8.1.49.6.1.2	DisplayString	read-only	A DisplayString Object containing the data module type.
STR g3dmoduleName	1.3.6.1.4.1.6889.2.8.1.49.6.1.3	DisplayString	read-only	A DisplayString Object containing the name assigned to the data module.
STR g3dmodulePort	1.3.6.1.4.1.6889.2.8.1.49.6.1.4	DisplayString	read-only	A DisplayString Object that uniquely identifies a data-module port based on its location in the system. The syntax for the Port location is as follows: cabinet(01-44):carrier(A-E):slot(01-20):port(01-32).
g3occsum	1.3.6.1.4.1.6889.2.8.1.50
INT g3occsumTage	1.3.6.1.4.1.6889.2.8.1.50.1	INTEGER	read-only	The number of timeticks since the occupancy summary data was last extracted from the switch by the Proxy Agent. This object along with the g3occsumintvl object allows the Network Manager to determine the validity of the occupancy summary data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3occsumTintvl	1.3.6.1.4.1.6889.2.8.1.50.2	INTEGER	read-write	An object containing the interval for which the occupancy summary data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for occupancy summary objects is received by the agent it uses the g3occsumage and g3occsumintvl objects to determine whether it should refresh the cached occsumTable. If g3occsumstmp + g3occsumintvl is less than the current value of the sysUpTime object then the agent refreshes the occsumTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3occsumTdelay	1.3.6.1.4.1.6889.2.8.1.50.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3occsumTretrieve	1.3.6.1.4.1.6889.2.8.1.50.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3occsumTcount	1.3.6.1.4.1.6889.2.8.1.50.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3occsumTable	1.3.6.1.4.1.6889.2.8.1.50.6		not-accessible	A list of g3occsum entries.
g3occsumEntry	1.3.6.1.4.1.6889.2.8.1.50.6.1		not-accessible	A g3occsum entry containing objects of the g3occsum information sent by the switch.
INT g3occsumMeasHour	1.3.6.1.4.1.6889.2.8.1.50.6.1.1	INTEGER	read-only	An object containing the Peak Hour for occupancy.
INT g3occsumRunYear	1.3.6.1.4.1.6889.2.8.1.50.6.1.2	INTEGER	read-only	An object containing the Year the command was executed.
INT g3occsumRunMonth	1.3.6.1.4.1.6889.2.8.1.50.6.1.3	INTEGER	read-only	An object containing the Month the command was executed.
INT g3occsumRunDay	1.3.6.1.4.1.6889.2.8.1.50.6.1.4	INTEGER	read-only	An object containing the Day the command was executed.
INT g3occsumRunHour	1.3.6.1.4.1.6889.2.8.1.50.6.1.5	INTEGER	read-only	An object containing the Hour the measurement was taken.
INT g3occsumPeakHour	1.3.6.1.4.1.6889.2.8.1.50.6.1.6	INTEGER	read-only	An object containing the Hour the command was executed.
INT g3occsumStatOcc	1.3.6.1.4.1.6889.2.8.1.50.6.1.7	INTEGER	read-only	An object containing the processor utilized by static processes.
INT g3occsumCPOcc	1.3.6.1.4.1.6889.2.8.1.50.6.1.8	INTEGER	read-only	An object containing the processor occupancy utilized by Call Processing processes.
INT g3occsumSMOcc	1.3.6.1.4.1.6889.2.8.1.50.6.1.9	INTEGER	read-only	An object containing the processor occupancy utilized by System Management processes.
INT g3occsumIdleOcc	1.3.6.1.4.1.6889.2.8.1.50.6.1.10	INTEGER	read-only	An object containing the processor occupancy that is unused.
INT g3occsumTotCall	1.3.6.1.4.1.6889.2.8.1.50.6.1.11	INTEGER	read-only	An object containing total calls connected for the measurement hour.
INT g3occsumTandCall	1.3.6.1.4.1.6889.2.8.1.50.6.1.12	INTEGER	read-only	An object containing trunk-to-trunk calls connected for the measurement hour.
INT g3occsumTotAtt	1.3.6.1.4.1.6889.2.8.1.50.6.1.13	INTEGER	read-only	An object containing the total calls attempted for the measurement hour.
INT g3occsumIntcomAtt	1.3.6.1.4.1.6889.2.8.1.50.6.1.14	INTEGER	read-only	An object containing the number of extension-to-extension calls on the same switch and partially completed calls for the measurement hour.
INT g3occsumIncAtt	1.3.6.1.4.1.6889.2.8.1.50.6.1.15	INTEGER	read-only	An object containing the number of incoming trunk seizures from public network facilities.
INT g3occsumOutAtt	1.3.6.1.4.1.6889.2.8.1.50.6.1.16	INTEGER	read-only	An object containing the number of outgoing trunk seizures that are made over public network facilities.
INT g3occsumPnetAtt	1.3.6.1.4.1.6889.2.8.1.50.6.1.17	INTEGER	read-only	The number of incoming and outgoing seizures that are made over
g3attdgrp	1.3.6.1.4.1.6889.2.8.1.51
INT g3attdgrpTage	1.3.6.1.4.1.6889.2.8.1.51.1	INTEGER	read-only	The number of timeticks since the attendant group data was last extracted from the switch by the Proxy Agent. This object along with the g3attdgrpintvl object allows the Network Manager to determine the validity of the attendant group data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3attdgrpTintvl	1.3.6.1.4.1.6889.2.8.1.51.2	INTEGER	read-write	An object containing the interval for which the attendant group data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for attendant group objects is received by the agent it uses the g3attdgrpage and g3attdgrpintvl objects to determine whether it should refresh the cached attdgrpTable. If g3attdgrpstmp + g3attdgrpintvl is less than the current value of the sysUpTime object then the agent refreshes the attdgrpTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3attdgrpTdelay	1.3.6.1.4.1.6889.2.8.1.51.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3attdgrpTretrieve	1.3.6.1.4.1.6889.2.8.1.51.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3attdgrpTcount	1.3.6.1.4.1.6889.2.8.1.51.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3attdgrpTable	1.3.6.1.4.1.6889.2.8.1.51.6		not-accessible	A list of g3attdgrp entries.
g3attdgrpEntry	1.3.6.1.4.1.6889.2.8.1.51.6.1		not-accessible	A g3attdgrp entry containing objects of the g3attdgrp information sent by the switch.
STR g3attdgrpMeasType	1.3.6.1.4.1.6889.2.8.1.51.6.1.1	DisplayString	read-only	A DisplayString object containing the measurement type (YEST PEAK, TODAY PEAK, LASTHOUR).
INT g3attdgrpMeasHour	1.3.6.1.4.1.6889.2.8.1.51.6.1.2	INTEGER	read-only	An object containing the Hour the measurement was taken.
INT g3attdgrpRunYear	1.3.6.1.4.1.6889.2.8.1.51.6.1.3	INTEGER	read-only	An object containing the Year the command was executed.
INT g3attdgrpRunMonth	1.3.6.1.4.1.6889.2.8.1.51.6.1.4	INTEGER	read-only	An object containing the Month the command was executed.
INT g3attdgrpRunDay	1.3.6.1.4.1.6889.2.8.1.51.6.1.5	INTEGER	read-only	An object containing the Day the command was executed.
INT g3attdgrpRunHour	1.3.6.1.4.1.6889.2.8.1.51.6.1.6	INTEGER	read-only	An object containing the Hour the command was executed.
INT g3attdgrpGrpSiz	1.3.6.1.4.1.6889.2.8.1.51.6.1.7	INTEGER	read-only	An object containing the number of attendant positions that are administered for the groups.
INT g3attdgrpCallsAns	1.3.6.1.4.1.6889.2.8.1.51.6.1.8	INTEGER	read-only	An object containing the number of calls answered by all active attendants during the measurement hour.
INT g3attdgrpCallsAbnd	1.3.6.1.4.1.6889.2.8.1.51.6.1.9	INTEGER	read-only	An object containing the number of calls that ring an attendant group and drop (hang up) before an attendant answers.
INT g3attdgrpCallsQued	1.3.6.1.4.1.6889.2.8.1.51.6.1.10	INTEGER	read-only	An object containing the total number of calls that were placed in the attendant queue (delayed) because no attendants were available.
INT g3attdgrpCallsHAbd	1.3.6.1.4.1.6889.2.8.1.51.6.1.11	INTEGER	read-only	An object containing the number of calls that abandon while the caller is in hold mode.
INT g3attdgrpCallsHeld	1.3.6.1.4.1.6889.2.8.1.51.6.1.12	INTEGER	read-only	An object containing the number of calls that are answered by the attendant group and then placed on hold.
INT g3attdgrpTimeAvail	1.3.6.1.4.1.6889.2.8.1.51.6.1.13	INTEGER	read-only	An object containing the time during which the pos avail lamp is lit on all attendant consoles, and the attendants are not talking on calls but are available to handle new calls (in CCS).
INT g3attdgrpTimeTalk	1.3.6.1.4.1.6889.2.8.1.51.6.1.14	INTEGER	read-only	An object containing the time that attendants are active or talking on a loop (in CCS).
INT g3attdgrpTimeHeld	1.3.6.1.4.1.6889.2.8.1.51.6.1.15	INTEGER	read-only	An object containing the time that attendants have calls on hold (in seconds).
INT g3attdgrpTimeAbnd	1.3.6.1.4.1.6889.2.8.1.51.6.1.16	INTEGER	read-only	An object containing the average amount of time that calls spend in queue and/or ringing at the console before the caller hangs up (in seconds).
INT g3attdgrpSpeedAns	1.3.6.1.4.1.6889.2.8.1.51.6.1.17	INTEGER	read-only	An object containing the average elapsed time from when a call terminates at the attendant group to when the call is answered by an attendant (in seconds).
g3attdpos	1.3.6.1.4.1.6889.2.8.1.52
INT g3attdposTage	1.3.6.1.4.1.6889.2.8.1.52.1	INTEGER	read-only	The number of timeticks since the attendant position data was last extracted from the switch by the Proxy Agent. This object along with the g3attdposintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3attdposTintvl	1.3.6.1.4.1.6889.2.8.1.52.2	INTEGER	read-write	An object containing the interval for which the attendant position data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for attendant position objects is received by the agent it uses the g3attdposage and g3attdposintvl objects to determine whether it should refresh the cached attdposTable. If g3attdposstmp + g3attdposintvl is less than the current value of the sysUpTime object then the agent refreshes the attdposTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3attdposTdelay	1.3.6.1.4.1.6889.2.8.1.52.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3attdposTretrieve	1.3.6.1.4.1.6889.2.8.1.52.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3attdposTcount	1.3.6.1.4.1.6889.2.8.1.52.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3attdposTable	1.3.6.1.4.1.6889.2.8.1.52.6		not-accessible	A list of g3attdpos entries.
g3attdposEntry	1.3.6.1.4.1.6889.2.8.1.52.6.1		not-accessible	A g3attdpos entry containing objects of the g3attdpos information sent by the switch.
INT g3attdposAttdID	1.3.6.1.4.1.6889.2.8.1.52.6.1.1	INTEGER	read-only	An object containing an attendant number to identify which attendant data is being displayed.
INT g3attdposYear	1.3.6.1.4.1.6889.2.8.1.52.6.1.2	INTEGER	read-only	An object containing the Year the command was executed.
INT g3attdposMonth	1.3.6.1.4.1.6889.2.8.1.52.6.1.3	INTEGER	read-only	An object containing the Month the command was executed.
INT g3attdposDay	1.3.6.1.4.1.6889.2.8.1.52.6.1.4	INTEGER	read-only	An object containing the Day the command was executed.
INT g3attdposHour	1.3.6.1.4.1.6889.2.8.1.52.6.1.5	INTEGER	read-only	An object containing the Hour the command was executed.
INT g3attdposPeakHour	1.3.6.1.4.1.6889.2.8.1.52.6.1.6	INTEGER	read-only	An object containing the peak measurement hour.
INT g3attdposPkTimeAvail	1.3.6.1.4.1.6889.2.8.1.52.6.1.7	INTEGER	read-only	An object containing the total time the attendant is availiable to receive calls during the polling interval (in CCS).
INT g3attdposPkTimeTalk	1.3.6.1.4.1.6889.2.8.1.52.6.1.8	INTEGER	read-only	An object containing the total time the attendant is active on calls (in CCS).
INT g3attdposPkTimeHeld	1.3.6.1.4.1.6889.2.8.1.52.6.1.9	INTEGER	read-only	An object containing the total time the attendant has calls on hold (in seconds).
INT g3attdposPkCallsAns	1.3.6.1.4.1.6889.2.8.1.52.6.1.10	INTEGER	read-only	An object containing the total number of calls answered by the attendant (in CCS).
INT g3attdposLastHour	1.3.6.1.4.1.6889.2.8.1.52.6.1.11	INTEGER	read-only	An object containing the last measurement hour.
INT g3attdposTimeAvail	1.3.6.1.4.1.6889.2.8.1.52.6.1.12	INTEGER	read-only	An object containing the total time the attendant is availiable to receive calls during the polling interval (in CCS).
INT g3attdposTimeTalk	1.3.6.1.4.1.6889.2.8.1.52.6.1.13	INTEGER	read-only	An object containing the total time the attendant is active on calls (in CCS).
INT g3attdposTimeHeld	1.3.6.1.4.1.6889.2.8.1.52.6.1.14	INTEGER	read-only	An object containing the total time the attendant has calls on hold (in seconds).
INT g3attdposCallsAns	1.3.6.1.4.1.6889.2.8.1.52.6.1.15	INTEGER	read-only	An object containing the total number of calls answered by the attendant (in CCS).
g3trunksum	1.3.6.1.4.1.6889.2.8.1.53
INT g3trunksumTage	1.3.6.1.4.1.6889.2.8.1.53.1	INTEGER	read-only	The number of timeticks since the trunk summary data was last extracted from the switch by the Proxy Agent. This object along with the g3trunksumintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3trunksumTintvl	1.3.6.1.4.1.6889.2.8.1.53.2	INTEGER	read-write	An object containing the interval for which the trunk summary data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for trunk summary objects is received by the agent it uses the g3trunksumage and g3trunksumintvl objects to determine whether it should refresh the cached trunksumTable. If g3trunksumstmp + g3trunksumintvl is less than the current value of the sysUpTime object then the agent refreshes the trunksumTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3trunksumTdelay	1.3.6.1.4.1.6889.2.8.1.53.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3trunksumTretrieve	1.3.6.1.4.1.6889.2.8.1.53.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3trunksumTcount	1.3.6.1.4.1.6889.2.8.1.53.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3trunksumTable	1.3.6.1.4.1.6889.2.8.1.53.6		not-accessible	A list of g3trunksum entries.
g3trunksumEntry	1.3.6.1.4.1.6889.2.8.1.53.6.1		not-accessible	A g3trunksum entry containing objects of the g3trunksum information sent by the switch.
INT g3trunksumTrunkGroup	1.3.6.1.4.1.6889.2.8.1.53.6.1.1	INTEGER	read-only	An object containing the trunk group number for which data has been collected.
INT g3trunksumMeasHour	1.3.6.1.4.1.6889.2.8.1.53.6.1.2	INTEGER	read-only	An object containing the Hour the measurement was taken.
INT g3trunksumRunYear	1.3.6.1.4.1.6889.2.8.1.53.6.1.3	INTEGER	read-only	An object containing the Year the command was executed.
INT g3trunksumRunMonth	1.3.6.1.4.1.6889.2.8.1.53.6.1.4	INTEGER	read-only	An object containing the Month the command was executed.
INT g3trunksumRunDay	1.3.6.1.4.1.6889.2.8.1.53.6.1.5	INTEGER	read-only	An object containing the Day the command was executed.
INT g3trunksumRunHour	1.3.6.1.4.1.6889.2.8.1.53.6.1.6	INTEGER	read-only	An object containing the Hour the command was executed.
INT g3trunksumGroupSize	1.3.6.1.4.1.6889.2.8.1.53.6.1.7	INTEGER	read-only	An object containing the number of administered trunks in the trunk group.
INT g3trunksumTotalUsage	1.3.6.1.4.1.6889.2.8.1.53.6.1.8	INTEGER	read-only	An object containing the total time trunks are busy with calls during the measurement period (in CCS).
INT g3trunksumTotalSeize	1.3.6.1.4.1.6889.2.8.1.53.6.1.9	INTEGER	read-only	An object containing the number of times a trunk was seized in the group including false starts, don't answer and busy.
INT g3trunksumIncSeize	1.3.6.1.4.1.6889.2.8.1.53.6.1.10	INTEGER	read-only	An object containing the number of incoming seizures carried on the trunk group.
INT g3trunksumGrpOvfl	1.3.6.1.4.1.6889.2.8.1.53.6.1.11	INTEGER	read-only	An object containing the number of calls offered to a trunk group that are not carried or queued.
INT g3trunksumQueSiz	1.3.6.1.4.1.6889.2.8.1.53.6.1.12	INTEGER	read-only	An object containing a number (0-100) that identifies the number of slots assigned to the trunk group queue.
INT g3trunksumCallQued	1.3.6.1.4.1.6889.2.8.1.53.6.1.13	INTEGER	read-only	An object containing the total number of calls that entered the trunk group queue after finding all trunks busy.
INT g3trunksumQueOvf	1.3.6.1.4.1.6889.2.8.1.53.6.1.14	INTEGER	read-only	An object containing the total number of calls that were not queued because the queue was full.
INT g3trunksumQueAbd	1.3.6.1.4.1.6889.2.8.1.53.6.1.15	INTEGER	read-only	An object containing the total number of calls that were removed from the queue (i.e., due to queue timeout or user cancel)
INT g3trunksumOutSrv	1.3.6.1.4.1.6889.2.8.1.53.6.1.16	INTEGER	read-only	An object containing the number of trunks in the group that are out of service (maintenance busy).
INT g3trunksumPercentAtb	1.3.6.1.4.1.6889.2.8.1.53.6.1.17	INTEGER	read-only	An object containing the percentage of time all trunks in the group were simultaneously in use.
INT g3trunksumPercentOutBlk	1.3.6.1.4.1.6889.2.8.1.53.6.1.18	INTEGER	read-only	An object containing the percentage of offered calls that are not carried on the group.
g3pktrunksum	1.3.6.1.4.1.6889.2.8.1.54
INT g3pktrunksumTage	1.3.6.1.4.1.6889.2.8.1.54.1	INTEGER	read-only	The number of timeticks since the trunk summary data was last extracted from the switch by the Proxy Agent. This object along with the g3trunksumintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3pktrunksumTintvl	1.3.6.1.4.1.6889.2.8.1.54.2	INTEGER	read-write	An object containing the interval for which the trunk summary data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for trunk summary objects is received by the agent it uses the g3trunksumage and g3trunksumintvl objects to determine whether it should refresh the cached trunksumTable. If g3trunksumstmp + g3trunksumintvl is less than the current value of the sysUpTime object then the agent refreshes the trunksumTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3pktrunksumTdelay	1.3.6.1.4.1.6889.2.8.1.54.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3pktrunksumTretrieve	1.3.6.1.4.1.6889.2.8.1.54.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3pktrunksumTcount	1.3.6.1.4.1.6889.2.8.1.54.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3pktrunksumTable	1.3.6.1.4.1.6889.2.8.1.54.6		not-accessible	A list of g3pktrunksum entries.
g3pktrunksumEntry	1.3.6.1.4.1.6889.2.8.1.54.6.1		not-accessible	A g3pktrunksum entry containing objects of the g3pktrunksum information sent by the switch.
INT g3pktrunksumTrunkGroup	1.3.6.1.4.1.6889.2.8.1.54.6.1.1	INTEGER	read-only	An object containing the trunk group number for which data has been collected.
INT g3pktrunksumMeasHour	1.3.6.1.4.1.6889.2.8.1.54.6.1.2	INTEGER	read-only	An object containing the Hour the measurement was taken.
INT g3pktrunksumRunYear	1.3.6.1.4.1.6889.2.8.1.54.6.1.3	INTEGER	read-only	An object containing the Year the command was executed.
INT g3pktrunksumRunMonth	1.3.6.1.4.1.6889.2.8.1.54.6.1.4	INTEGER	read-only	An object containing the Month the command was executed.
INT g3pktrunksumRunDay	1.3.6.1.4.1.6889.2.8.1.54.6.1.5	INTEGER	read-only	An object containing the Day the command was executed.
INT g3pktrunksumRunHour	1.3.6.1.4.1.6889.2.8.1.54.6.1.6	INTEGER	read-only	An object containing the Hour the command was executed.
INT g3pktrunksumGroupSize	1.3.6.1.4.1.6889.2.8.1.54.6.1.7	INTEGER	read-only	An object containing the number of administered trunks in the trunk group.
INT g3pktrunksumTotalUsage	1.3.6.1.4.1.6889.2.8.1.54.6.1.8	INTEGER	read-only	An object containing the total time trunks are busy with calls during the measurement period (in CCS).
INT g3pktrunksumTotalSeize	1.3.6.1.4.1.6889.2.8.1.54.6.1.9	INTEGER	read-only	An object containing the number of times a trunk was seized in the group including false starts, don't answer and busy.
INT g3pktrunksumIncSeize	1.3.6.1.4.1.6889.2.8.1.54.6.1.10	INTEGER	read-only	An object containing the number of incoming seizures carried on the trunk group.
INT g3pktrunksumGrpOvfl	1.3.6.1.4.1.6889.2.8.1.54.6.1.11	INTEGER	read-only	An object containing the number of calls offered to a trunk group that are not carried or queued.
INT g3pktrunksumQueSiz	1.3.6.1.4.1.6889.2.8.1.54.6.1.12	INTEGER	read-only	An object containing a number (0-100) that identifies the number of slots assigned to the trunk group queue.
INT g3pktrunksumCallQued	1.3.6.1.4.1.6889.2.8.1.54.6.1.13	INTEGER	read-only	An object containing the total number of calls that entered the trunk group queue after finding all trunks busy.
INT g3pktrunksumQueOvf	1.3.6.1.4.1.6889.2.8.1.54.6.1.14	INTEGER	read-only	An object containing the total number of calls that were not queued because the queue was full.
INT g3pktrunksumQueAbd	1.3.6.1.4.1.6889.2.8.1.54.6.1.15	INTEGER	read-only	An object containing the total number of calls that were removed from the queue (i.e., due to queue timeout or user cancel)
INT g3pktrunksumOutSrv	1.3.6.1.4.1.6889.2.8.1.54.6.1.16	INTEGER	read-only	An object containing the number of trunks in the group that are out of service (maintenance busy).
INT g3pktrunksumPercentAtb	1.3.6.1.4.1.6889.2.8.1.54.6.1.17	INTEGER	read-only	An object containing the percentage of time all trunks in the group were simultaneously in use.
INT g3pktrunksumPercentOutBlk	1.3.6.1.4.1.6889.2.8.1.54.6.1.18	INTEGER	read-only	An object containing the percentage of offered calls that are not carried on the group.
g3trunkwbsum	1.3.6.1.4.1.6889.2.8.1.55
INT g3trunkwbsumTage	1.3.6.1.4.1.6889.2.8.1.55.1	INTEGER	read-only	The number of timeticks since the wideband trunk summary data was last extracted from the switch by the Proxy Agent. This object along with the g3trunkwbsumintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3trunkwbsumTintvl	1.3.6.1.4.1.6889.2.8.1.55.2	INTEGER	read-write	An object containing the interval for which the wideband trunk summary data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for wideband trunk summary objects is received by the agent it uses the g3trunkwbsumage and g3trunkwbsumintvl objects to determine whether it should refresh the cached trunkwbsumTable. If g3trunkwbsumstmp + g3trunkwbsumintvl is less than the current value of the sysUpTime object then the agent refreshes the trunkwbsumTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3trunkwbsumTdelay	1.3.6.1.4.1.6889.2.8.1.55.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3trunkwbsumTretrieve	1.3.6.1.4.1.6889.2.8.1.55.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3trunkwbsumTcount	1.3.6.1.4.1.6889.2.8.1.55.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3trunkwbsumTable	1.3.6.1.4.1.6889.2.8.1.55.6		not-accessible	A list of g3trunkwbsum entries.
g3trunkwbsumEntry	1.3.6.1.4.1.6889.2.8.1.55.6.1		not-accessible	A g3trunkwbsum entry containing objects of the g3trunkwbsum information sent by the switch.
INT g3trunkwbsumTrunkGroup	1.3.6.1.4.1.6889.2.8.1.55.6.1.1	INTEGER	read-only	An object containing the trunk group number for which data has been collected.
INT g3trunkwbsumMeasHour	1.3.6.1.4.1.6889.2.8.1.55.6.1.2	INTEGER	read-only	An object containing the Hour the measurement was taken.
INT g3trunkwbsumYear	1.3.6.1.4.1.6889.2.8.1.55.6.1.3	INTEGER	read-only	An object containing the Year the command was executed.
INT g3trunkwbsumMonth	1.3.6.1.4.1.6889.2.8.1.55.6.1.4	INTEGER	read-only	An object containing the Month the command was executed.
INT g3trunkwbsumDay	1.3.6.1.4.1.6889.2.8.1.55.6.1.5	INTEGER	read-only	An object containing the Day the command was executed.
INT g3trunkwbsumHour	1.3.6.1.4.1.6889.2.8.1.55.6.1.6	INTEGER	read-only	An object containing the Hour the command was executed.
INT g3trunkwbsumTotalUsage	1.3.6.1.4.1.6889.2.8.1.55.6.1.7	INTEGER	read-only	An object containing the total wideband call usage for all trunks in the trunk group (in CCS).
INT g3trunkwbsumTotalSeize	1.3.6.1.4.1.6889.2.8.1.55.6.1.8	INTEGER	read-only	An object containing the number of wideband call attempts.
INT g3trunkwbsumIncSeize	1.3.6.1.4.1.6889.2.8.1.55.6.1.9	INTEGER	read-only	An object containing the number of wideband incoming call attempts.
INT g3trunkwbsumGrpOvfl	1.3.6.1.4.1.6889.2.8.1.55.6.1.10	INTEGER	read-only	An object containing the number of wideband outgoing calls that were attempted when the remaining trunk group capacity was insufficient to accommodate the call or the trunk group's remaining bandwidth was in the wrong configuration.
INT g3trunkwbsumOutSrv	1.3.6.1.4.1.6889.2.8.1.55.6.1.11	INTEGER	read-only	An object containing the number of wideband trunks in the group that are out of service (listed as maintenance busy).
INT g3trunkwbsumPercentAtb	1.3.6.1.4.1.6889.2.8.1.55.6.1.12	INTEGER	read-only	An object containing the percentage of time that all trunks in the trunk group were simultaneously in use during the measurement interval.
INT g3trunkwbsumPercentOutBlk	1.3.6.1.4.1.6889.2.8.1.55.6.1.13	INTEGER	read-only	An object containing the percentage of offered wideband calls that are not carried on the trunk group.
g3pktrunkwbsum	1.3.6.1.4.1.6889.2.8.1.56
INT g3pktrunkwbsumTage	1.3.6.1.4.1.6889.2.8.1.56.1	INTEGER	read-only	The number of timeticks since the wideband trunk summary data was last extracted from the switch by the Proxy Agent. This object along with the g3trunkwbsumintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3pktrunkwbsumTintvl	1.3.6.1.4.1.6889.2.8.1.56.2	INTEGER	read-write	An object containing the interval for which the wideband trunk summary data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for wideband trunk summary objects is received by the agent it uses the g3trunkwbsumage and g3trunkwbsumintvl objects to determine whether it should refresh the cached trunkwbsumTable. If g3trunkwbsumstmp + g3trunkwbsumintvl is less than the current value of the sysUpTime object then the agent refreshes the trunkwbsumTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3pktrunkwbsumTdelay	1.3.6.1.4.1.6889.2.8.1.56.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3pktrunkwbsumTretrieve	1.3.6.1.4.1.6889.2.8.1.56.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3pktrunkwbsumTcount	1.3.6.1.4.1.6889.2.8.1.56.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3pktrunkwbsumTable	1.3.6.1.4.1.6889.2.8.1.56.6		not-accessible	A list of g3pktrunkwbsum entries.
g3pktrunkwbsumEntry	1.3.6.1.4.1.6889.2.8.1.56.6.1		not-accessible	A g3pktrunkwbsum entry containing objects of the g3pktrunkwbsum information sent by the switch.
INT g3pktrunkwbsumTrunkGroup	1.3.6.1.4.1.6889.2.8.1.56.6.1.1	INTEGER	read-only	An object containing the trunk group number for which data has been collected.
INT g3pktrunkwbsumMeasHour	1.3.6.1.4.1.6889.2.8.1.56.6.1.2	INTEGER	read-only	An object containing the Hour the measurement was taken.
INT g3pktrunkwbsumYear	1.3.6.1.4.1.6889.2.8.1.56.6.1.3	INTEGER	read-only	An object containing the Year the command was executed.
INT g3pktrunkwbsumMonth	1.3.6.1.4.1.6889.2.8.1.56.6.1.4	INTEGER	read-only	An object containing the Month the command was executed.
INT g3pktrunkwbsumDay	1.3.6.1.4.1.6889.2.8.1.56.6.1.5	INTEGER	read-only	An object containing the Day the command was executed.
INT g3pktrunkwbsumHour	1.3.6.1.4.1.6889.2.8.1.56.6.1.6	INTEGER	read-only	An object containing the Hour the command was executed.
INT g3pktrunkwbsumTotalUsage	1.3.6.1.4.1.6889.2.8.1.56.6.1.7	INTEGER	read-only	An object containing the total wideband call usage for all trunks in the trunk group (in CCS).
INT g3pktrunkwbsumTotalSeize	1.3.6.1.4.1.6889.2.8.1.56.6.1.8	INTEGER	read-only	An object containing the number of wideband call attempts.
INT g3pktrunkwbsumIncSeize	1.3.6.1.4.1.6889.2.8.1.56.6.1.9	INTEGER	read-only	An object containing the number of wideband incoming call attempts.
INT g3pktrunkwbsumGrpOvfl	1.3.6.1.4.1.6889.2.8.1.56.6.1.10	INTEGER	read-only	An object containing the number of wideband outgoing calls that were attempted when the remaining trunk group capacity was insufficient to accommodate the call or the trunk group's remaining bandwidth was in the wrong configuration.
INT g3pktrunkwbsumOutSrv	1.3.6.1.4.1.6889.2.8.1.56.6.1.11	INTEGER	read-only	An object containing the number of wideband trunks in the group that are out of service (listed as maintenance busy).
INT g3pktrunkwbsumPercentAtb	1.3.6.1.4.1.6889.2.8.1.56.6.1.12	INTEGER	read-only	An object containing the percentage of time that all trunks in the trunk group were simultaneously in use during the measurement interval.
INT g3pktrunkwbsumPercentOutBlk	1.3.6.1.4.1.6889.2.8.1.56.6.1.13	INTEGER	read-only	An object containing the percentage of offered wideband calls that are not carried on the trunk group.
g3pktrunkout	1.3.6.1.4.1.6889.2.8.1.57
INT g3pktrunkoutTage	1.3.6.1.4.1.6889.2.8.1.57.1	INTEGER	read-only	The number of timeticks since the outage trunk data was last extracted from the switch by the Proxy Agent. This object along with the g3pktrunkoutintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3pktrunkoutTintvl	1.3.6.1.4.1.6889.2.8.1.57.2	INTEGER	read-write	An object containing the interval for which the trunk outage data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for trunk outage objects is received by the agent it uses the g3pktrunkoutage and g3pktrunkoutintvl objects to determine whether it should refresh the cached pktrunkoutTable. If g3pktrunkoutstmp + g3pktrunkoutintvl is less than the current value of the sysUpTime object then the agent refreshes the pktrunkoutTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3pktrunkoutTdelay	1.3.6.1.4.1.6889.2.8.1.57.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3pktrunkoutTretrieve	1.3.6.1.4.1.6889.2.8.1.57.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3pktrunkoutTcount	1.3.6.1.4.1.6889.2.8.1.57.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3pktrunkoutTable	1.3.6.1.4.1.6889.2.8.1.57.6		not-accessible	A list of g3pktrunkout entries.
g3pktrunkoutEntry	1.3.6.1.4.1.6889.2.8.1.57.6.1		not-accessible	A g3pktrunkout entry containing objects of the g3pktrunkout information sent by the switch.
INT g3pktrunkoutTrunkGroup	1.3.6.1.4.1.6889.2.8.1.57.6.1.1	INTEGER	read-only	An object containing the trunk group number.
INT g3pktrunkoutMember	1.3.6.1.4.1.6889.2.8.1.57.6.1.2	INTEGER	read-only	An object containing the group member number.
INT g3pktrunkoutYear	1.3.6.1.4.1.6889.2.8.1.57.6.1.3	INTEGER	read-only	An object containing the Year the command was executed.
INT g3pktrunkoutMonth	1.3.6.1.4.1.6889.2.8.1.57.6.1.4	INTEGER	read-only	An object containing the Month the command was executed.
INT g3pktrunkoutDay	1.3.6.1.4.1.6889.2.8.1.57.6.1.5	INTEGER	read-only	An object containing the Day the command was executed.
INT g3pktrunkoutHour	1.3.6.1.4.1.6889.2.8.1.57.6.1.6	INTEGER	read-only	An object containing the Hour the command was executed.
INT g3pktrunkoutOutages	1.3.6.1.4.1.6889.2.8.1.57.6.1.7	INTEGER	read-only	An object containing the number of times the group member is sampled as out of service over the measurement period.
g3pktrunklight	1.3.6.1.4.1.6889.2.8.1.58
INT g3pktrunklightTage	1.3.6.1.4.1.6889.2.8.1.58.1	INTEGER	read-only	The number of timeticks since the lightly used trunk data was last extracted from the switch by the Proxy Agent. This object along with the g3pktrunklightintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3pktrunklightTintvl	1.3.6.1.4.1.6889.2.8.1.58.2	INTEGER	read-write	An object containing the interval for which the lightly used trunk data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for lightly used trunk objects is received by the agent it uses the g3pktrunklightage and g3pktrunklightintvl objects to determine whether it should refresh the cached pktrunklightTable. If g3pktrunklightstmp+g3pktrunklightintvl is less than the current value of the sysUpTime object then the agent refreshes the pktrunklightTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3pktrunklightTdelay	1.3.6.1.4.1.6889.2.8.1.58.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3pktrunklightTretrieve	1.3.6.1.4.1.6889.2.8.1.58.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3pktrunklightTcount	1.3.6.1.4.1.6889.2.8.1.58.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3pktrunklightTable	1.3.6.1.4.1.6889.2.8.1.58.6		not-accessible	A list of g3pktrunklight entries.
g3pktrunklightEntry	1.3.6.1.4.1.6889.2.8.1.58.6.1		not-accessible	A g3pktrunklight entry containing objects of the g3pktrunklight information sent by the switch.
INT g3pktrunklightTrunkGroup	1.3.6.1.4.1.6889.2.8.1.58.6.1.1	INTEGER	read-only	An object containing the trunk group number.
INT g3pktrunklightMember	1.3.6.1.4.1.6889.2.8.1.58.6.1.2	INTEGER	read-only	An object containing the group member number.
INT g3pktrunklightYear	1.3.6.1.4.1.6889.2.8.1.58.6.1.3	INTEGER	read-only	An object containing the Year the command was executed.
INT g3pktrunklightMonth	1.3.6.1.4.1.6889.2.8.1.58.6.1.4	INTEGER	read-only	An object containing the Month the command was executed.
INT g3pktrunklightDay	1.3.6.1.4.1.6889.2.8.1.58.6.1.5	INTEGER	read-only	An object containing the Day the command was executed.
INT g3pktrunklightHour	1.3.6.1.4.1.6889.2.8.1.58.6.1.6	INTEGER	read-only	An object containing the Hour the command was executed.
INT g3pktrunklightCarried	1.3.6.1.4.1.6889.2.8.1.58.6.1.7	INTEGER	read-only	An object containing the number of calls carried on the trunk member over the measurement interval.
g3pnblock	1.3.6.1.4.1.6889.2.8.1.59
INT g3pnblockTage	1.3.6.1.4.1.6889.2.8.1.59.1	INTEGER	read-only	The number of timeticks since the port network blockage data was last extracted from the switch by the Proxy Agent. This object along with the g3pnblockintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3pnblockTintvl	1.3.6.1.4.1.6889.2.8.1.59.2	INTEGER	read-write	An object containing the interval for which the port network blockage data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for port network blockage objects is received by the agent it uses the g3pnblockage and g3pnblockintvl objects to determine whether it should refresh the cached pnblockTable. If g3pnblockstmp + g3pnblockintvl is less than the current value of the sysUpTime object then the agent refreshes the pnblockTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3pnblockTdelay	1.3.6.1.4.1.6889.2.8.1.59.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3pnblockTretrieve	1.3.6.1.4.1.6889.2.8.1.59.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3pnblockTcount	1.3.6.1.4.1.6889.2.8.1.59.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3pnblockTable	1.3.6.1.4.1.6889.2.8.1.59.6		not-accessible	A list of g3pnblock entries.
g3pnblockEntry	1.3.6.1.4.1.6889.2.8.1.59.6.1		not-accessible	A g3pnblock entry containing objects of the g3pnblock information sent by the switch.
INT g3pnblockPNNumber	1.3.6.1.4.1.6889.2.8.1.59.6.1.1	INTEGER	read-only	An object containing the Port Network number.
INT g3pnblockMeasHour	1.3.6.1.4.1.6889.2.8.1.59.6.1.2	INTEGER	read-only	An object containing the Hour the measurement was taken.
INT g3pnblockYear	1.3.6.1.4.1.6889.2.8.1.59.6.1.3	INTEGER	read-only	An object containing the Year the command was executed.
INT g3pnblockMonth	1.3.6.1.4.1.6889.2.8.1.59.6.1.4	INTEGER	read-only	An object containing the Month the command was executed.
INT g3pnblockDay	1.3.6.1.4.1.6889.2.8.1.59.6.1.5	INTEGER	read-only	An object containing the Day the command was executed.
INT g3pnblockHour	1.3.6.1.4.1.6889.2.8.1.59.6.1.6	INTEGER	read-only	An object containing the Hour the command was executed.
INT g3pnblockTdmUsage	1.3.6.1.4.1.6889.2.8.1.59.6.1.7	INTEGER	read-only	An object containing the total TDM time-slot usage.
INT g3pnblockTdmPeg	1.3.6.1.4.1.6889.2.8.1.59.6.1.8	INTEGER	read-only	An object containing the total count of circuit switch TDM time-slot seizure attempts for the PN.
INT g3pnblockTdmPeak	1.3.6.1.4.1.6889.2.8.1.59.6.1.9	INTEGER	read-only	An object containing the maximum number of time-slots allocated at any one time.
INT g3pnblockTdmBlockage	1.3.6.1.4.1.6889.2.8.1.59.6.1.10	INTEGER	read-only	An object containing the total count of TDM blockages, that is, the total number of times a TDM time-slot request is denied for the PN.
INT g3pnblockTimeSlots	1.3.6.1.4.1.6889.2.8.1.59.6.1.11	INTEGER	read-only	An object containing the number of PN link time-slots available between port networks or between Port Networks and Switch Nodes.
INT g3pnblockPNlinkUsage	1.3.6.1.4.1.6889.2.8.1.59.6.1.12	INTEGER	read-only	An object containing the total circuit switch usage of the available PN link(s) connecting the PN to the SN or to other PNs.
INT g3pnblockPNlinkPeg	1.3.6.1.4.1.6889.2.8.1.59.6.1.13	INTEGER	read-only	An object containing the total count of circuit switched time-slot seizure attempts for the link(s).
INT g3pnblockPNlinkPeak	1.3.6.1.4.1.6889.2.8.1.59.6.1.14	INTEGER	read-only	An object containing the maximum number of time slots allocated at any one time on the PN links.
INT g3pnblockPNlinkBlockage	1.3.6.1.4.1.6889.2.8.1.59.6.1.15	INTEGER	read-only	An object containing the total count of circuit switched PN blockages, that is, the number of times a PN link time-slot is denied.
g3pkpnblock	1.3.6.1.4.1.6889.2.8.1.60
INT g3pkpnblockTage	1.3.6.1.4.1.6889.2.8.1.60.1	INTEGER	read-only	The number of timeticks since the port network blockage data was last extracted from the switch by the Proxy Agent. This object along with the g3pnblockintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3pkpnblockTintvl	1.3.6.1.4.1.6889.2.8.1.60.2	INTEGER	read-write	An object containing the interval for which the port network blockage data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for port network blockage objects is received by the agent it uses the g3pnblockage and g3pnblockintvl objects to determine whether it should refresh the cached pnblockTable. If g3pnblockstmp + g3pnblockintvl is less than the current value of the sysUpTime object then the agent refreshes the pnblockTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3pkpnblockTdelay	1.3.6.1.4.1.6889.2.8.1.60.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3pkpnblockTretrieve	1.3.6.1.4.1.6889.2.8.1.60.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3pkpnblockTcount	1.3.6.1.4.1.6889.2.8.1.60.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3pkpnblockTable	1.3.6.1.4.1.6889.2.8.1.60.6		not-accessible	A list of g3pkpnblock entries.
g3pkpnblockEntry	1.3.6.1.4.1.6889.2.8.1.60.6.1		not-accessible	A g3pkpnblock entry containing objects of the g3pkpnblock information sent by the switch.
INT g3pkpnblockPNNumber	1.3.6.1.4.1.6889.2.8.1.60.6.1.1	INTEGER	read-only	An object containing the Port Network number.
INT g3pkpnblockMeasHour	1.3.6.1.4.1.6889.2.8.1.60.6.1.2	INTEGER	read-only	An object containing the Hour the measurement was taken.
INT g3pkpnblockYear	1.3.6.1.4.1.6889.2.8.1.60.6.1.3	INTEGER	read-only	An object containing the Year the command was executed.
INT g3pkpnblockMonth	1.3.6.1.4.1.6889.2.8.1.60.6.1.4	INTEGER	read-only	An object containing the Month the command was executed.
INT g3pkpnblockDay	1.3.6.1.4.1.6889.2.8.1.60.6.1.5	INTEGER	read-only	An object containing the Day the command was executed.
INT g3pkpnblockHour	1.3.6.1.4.1.6889.2.8.1.60.6.1.6	INTEGER	read-only	An object containing the Hour the command was executed.
INT g3pkpnblockTdmUsage	1.3.6.1.4.1.6889.2.8.1.60.6.1.7	INTEGER	read-only	An object containing the total TDM time-slot usage.
INT g3pkpnblockTdmPeg	1.3.6.1.4.1.6889.2.8.1.60.6.1.8	INTEGER	read-only	An object containing the total count of circuit switch TDM time-slot seizure attempts for the PN.
INT g3pkpnblockTdmPeak	1.3.6.1.4.1.6889.2.8.1.60.6.1.9	INTEGER	read-only	An object containing the maximum number of time-slots allocated at any one time.
INT g3pkpnblockTdmBlockage	1.3.6.1.4.1.6889.2.8.1.60.6.1.10	INTEGER	read-only	An object containing the total count of TDM blockages, that is, the total number of times a TDM time-slot request is denied for the PN.
INT g3pkpnblockTimeSlots	1.3.6.1.4.1.6889.2.8.1.60.6.1.11	INTEGER	read-only	An object containing the number of PN link time-slots available between port networks or between Port Networks and Switch Nodes.
INT g3pkpnblockPNlinkUsage	1.3.6.1.4.1.6889.2.8.1.60.6.1.12	INTEGER	read-only	An object containing the total circuit switch usage of the available PN link(s) connecting the PN to the SN or to other PNs.
INT g3pkpnblockPNlinkPeg	1.3.6.1.4.1.6889.2.8.1.60.6.1.13	INTEGER	read-only	An object containing the total count of circuit switched time-slot seizure attempts for the link(s).
INT g3pkpnblockPNlinkPeak	1.3.6.1.4.1.6889.2.8.1.60.6.1.14	INTEGER	read-only	An object containing the maximum number of time slots allocated at any one time on the PN links.
INT g3pkpnblockPNlinkBlockage	1.3.6.1.4.1.6889.2.8.1.60.6.1.15	INTEGER	read-only	An object containing the total count of circuit switched PN blockages, that is, the number of times a PN link time-slot is denied.
g3snblock	1.3.6.1.4.1.6889.2.8.1.61
INT g3snblockTage	1.3.6.1.4.1.6889.2.8.1.61.1	INTEGER	read-only	The number of timeticks since the switch node blockage data was last extracted from the switch by the Proxy Agent. This object along with the g3snblockintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3snblockTintvl	1.3.6.1.4.1.6889.2.8.1.61.2	INTEGER	read-write	An object containing the interval for which the switch node blockage data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for switch node blockage objects is received by the agent it uses the g3snblockage and g3snblockintvl objects to determine whether it should refresh the cached snblockTable. If g3snblockstmp + g3snblockintvl is less than the current value of the sysUpTime object then the agent refreshes the snblockTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3snblockTdelay	1.3.6.1.4.1.6889.2.8.1.61.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3snblockTretrieve	1.3.6.1.4.1.6889.2.8.1.61.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3snblockTcount	1.3.6.1.4.1.6889.2.8.1.61.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3snblockTable	1.3.6.1.4.1.6889.2.8.1.61.6		not-accessible	A list of g3snblock entries.
g3snblockEntry	1.3.6.1.4.1.6889.2.8.1.61.6.1		not-accessible	A g3snblock entry containing objects of the g3snblock information sent by the switch.
STR g3snblockSnPair	1.3.6.1.4.1.6889.2.8.1.61.6.1.1	DisplayString	read-only	An object containing the identifiers for the two SNs connected by the SN link being measured.
INT g3snblockMeasHour	1.3.6.1.4.1.6889.2.8.1.61.6.1.2	INTEGER	read-only	An object containing the Hour the measurement was taken.
INT g3snblockYear	1.3.6.1.4.1.6889.2.8.1.61.6.1.3	INTEGER	read-only	An object containing the Year the command was executed.
INT g3snblockMonth	1.3.6.1.4.1.6889.2.8.1.61.6.1.4	INTEGER	read-only	An object containing the Month the command was executed.
INT g3snblockDay	1.3.6.1.4.1.6889.2.8.1.61.6.1.5	INTEGER	read-only	An object containing the Day the command was executed.
INT g3snblockHour	1.3.6.1.4.1.6889.2.8.1.61.6.1.6	INTEGER	read-only	An object containing the Hour the command was executed.
INT g3snblockTimeSlots	1.3.6.1.4.1.6889.2.8.1.61.6.1.7	INTEGER	read-only	An object containing the number of SN link time-slots available between SNs.
INT g3snblockUsage	1.3.6.1.4.1.6889.2.8.1.61.6.1.8	INTEGER	read-only	An object containing the total circuit switch usage of the SN link connecting the two SNs.
INT g3snblockSnPeg	1.3.6.1.4.1.6889.2.8.1.61.6.1.9	INTEGER	read-only	An object containing the total count of circuit switched SN link time-slot seizure attempts between the two measured SNs.
INT g3snblockLinkBlockage	1.3.6.1.4.1.6889.2.8.1.61.6.1.10	INTEGER	read-only	An object containing the total count of circuit switched SN link blockages, that is, the total number of times a call is blocked because no time-slots are available either in the most direct route or through any alternate route.
INT g3snblockOverflow	1.3.6.1.4.1.6889.2.8.1.61.6.1.11	INTEGER	read-only	An object containing the total number of times a call had to be routed over an alternate route.
g3pksnblock	1.3.6.1.4.1.6889.2.8.1.62
INT g3pksnblockTage	1.3.6.1.4.1.6889.2.8.1.62.1	INTEGER	read-only	The number of timeticks since the switch node blockage data was last extracted from the switch by the Proxy Agent. This object along with the g3snblockintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3pksnblockTintvl	1.3.6.1.4.1.6889.2.8.1.62.2	INTEGER	read-write	An object containing the interval for which the switch node blockage data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for switch node blockage objects is received by the agent it uses the g3snblockage and g3snblockintvl objects to determine whether it should refresh the cached snblockTable. If g3snblockstmp + g3snblockintvl is less than the current value of the sysUpTime object then the agent refreshes the snblockTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3pksnblockTdelay	1.3.6.1.4.1.6889.2.8.1.62.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3pksnblockTretrieve	1.3.6.1.4.1.6889.2.8.1.62.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3pksnblockTcount	1.3.6.1.4.1.6889.2.8.1.62.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3pksnblockTable	1.3.6.1.4.1.6889.2.8.1.62.6		not-accessible	A list of g3pksnblock entries.
g3pksnblockEntry	1.3.6.1.4.1.6889.2.8.1.62.6.1		not-accessible	A g3pksnblock entry containing objects of the g3pksnblock information sent by the switch.
STR g3pksnblockSnPair	1.3.6.1.4.1.6889.2.8.1.62.6.1.1	DisplayString	read-only	An object containing the identifiers for the two SNs connected by the SN link being measured.
INT g3pksnblockMeasHour	1.3.6.1.4.1.6889.2.8.1.62.6.1.2	INTEGER	read-only	An object containing the Hour the measurement was taken.
INT g3pksnblockYear	1.3.6.1.4.1.6889.2.8.1.62.6.1.3	INTEGER	read-only	An object containing the Year the command was executed.
INT g3pksnblockMonth	1.3.6.1.4.1.6889.2.8.1.62.6.1.4	INTEGER	read-only	An object containing the Month the command was executed.
INT g3pksnblockDay	1.3.6.1.4.1.6889.2.8.1.62.6.1.5	INTEGER	read-only	An object containing the Day the command was executed.
INT g3pksnblockHour	1.3.6.1.4.1.6889.2.8.1.62.6.1.6	INTEGER	read-only	An object containing the Hour the command was executed.
INT g3pksnblockTimeSlots	1.3.6.1.4.1.6889.2.8.1.62.6.1.7	INTEGER	read-only	An object containing the number of SN link time-slots available between SNs.
INT g3pksnblockUsage	1.3.6.1.4.1.6889.2.8.1.62.6.1.8	INTEGER	read-only	An object containing the total circuit switch usage of the SN link connecting the two SNs.
INT g3pksnblockSnPeg	1.3.6.1.4.1.6889.2.8.1.62.6.1.9	INTEGER	read-only	An object containing the total count of circuit switched SN link time-slot seizure attempts between the two measured SNs.
INT g3pksnblockLinkBlockage	1.3.6.1.4.1.6889.2.8.1.62.6.1.10	INTEGER	read-only	An object containing the total count of circuit switched SN link blockages, that is, the total number of times a call is blocked because no time-slots are available either in the most direct route or through any alternate route.
INT g3pksnblockOverflow	1.3.6.1.4.1.6889.2.8.1.62.6.1.11	INTEGER	read-only	An object containing the total number of times a call had to be routed over an alternate route.
g3hunt	1.3.6.1.4.1.6889.2.8.1.63
INT g3huntTage	1.3.6.1.4.1.6889.2.8.1.63.1	INTEGER	read-only	The number of timeticks since the hunt group data was last extracted from the switch by the Proxy Agent. This object along with the g3huntintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3huntTintvl	1.3.6.1.4.1.6889.2.8.1.63.2	INTEGER	read-write	An object containing the interval for which the hunt group data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for hunt group objects is received by the agent it uses the g3huntage and g3huntintvl objects to determine whether it should refresh the cached huntTable. If g3huntstmp + g3huntintvl is less than the current value of the sysUpTime object then the agent refreshes the huntTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3huntTdelay	1.3.6.1.4.1.6889.2.8.1.63.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3huntTretrieve	1.3.6.1.4.1.6889.2.8.1.63.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3huntTcount	1.3.6.1.4.1.6889.2.8.1.63.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3huntTable	1.3.6.1.4.1.6889.2.8.1.63.6		not-accessible	A list of g3hunt entries.
g3huntEntry	1.3.6.1.4.1.6889.2.8.1.63.6.1		not-accessible	A g3hunt entry containing objects of the g3hunt information sent by the switch.
INT g3huntHuntGroup	1.3.6.1.4.1.6889.2.8.1.63.6.1.1	INTEGER	read-only	An object containing the hunt group number.
INT g3huntMeasHour	1.3.6.1.4.1.6889.2.8.1.63.6.1.2	INTEGER	read-only	An object containing the Hour the measurement was taken.
INT g3huntYear	1.3.6.1.4.1.6889.2.8.1.63.6.1.3	INTEGER	read-only	An object containing the Year the command was executed.
INT g3huntMonth	1.3.6.1.4.1.6889.2.8.1.63.6.1.4	INTEGER	read-only	An object containing the Month the command was executed.
INT g3huntDay	1.3.6.1.4.1.6889.2.8.1.63.6.1.5	INTEGER	read-only	An object containing the Day the command was executed.
INT g3huntHour	1.3.6.1.4.1.6889.2.8.1.63.6.1.6	INTEGER	read-only	An object containing the Hour the command was executed.
INT g3huntGroupSize	1.3.6.1.4.1.6889.2.8.1.63.6.1.7	INTEGER	read-only	An object containing the total number of members in the trunk group.
INT g3huntTotalUsage	1.3.6.1.4.1.6889.2.8.1.63.6.1.8	INTEGER	read-only	An object containing the sum of all times that the members of the hunt group are busy on hunt group calls (in CCS).
INT g3huntCallsAns	1.3.6.1.4.1.6889.2.8.1.63.6.1.9	INTEGER	read-only	An object containing the total number of calls that are answered by the hunt group.
INT g3huntCallsAban	1.3.6.1.4.1.6889.2.8.1.63.6.1.10	INTEGER	read-only	An object containing the total number of calls that attempt to reach the hunt group but abandon the attempt before being answered.
INT g3huntQueSiz	1.3.6.1.4.1.6889.2.8.1.63.6.1.11	INTEGER	read-only	An object containing the length of the queue assigned to the hunt group during administration.
INT g3huntCallsQue	1.3.6.1.4.1.6889.2.8.1.63.6.1.12	INTEGER	read-only	An object containing the total number of calls that arrive to find all members of the hunt group busy and are placed in the queue.
INT g3huntQueOvfl	1.3.6.1.4.1.6889.2.8.1.63.6.1.13	INTEGER	read-only	An object containing the number of calls that arrive when all slots in the hunt group queue are occupied.
INT g3huntTimeAvail	1.3.6.1.4.1.6889.2.8.1.63.6.1.14	INTEGER	read-only	An object containing the total time that the hunt group extensions are not in use but are available to receive hunt group calls (in CCS).
INT g3huntSpeedAns	1.3.6.1.4.1.6889.2.8.1.63.6.1.15	INTEGER	read-only	An object containing the average time interval from when the call first enters the hunt group or hunt group queue until the call is answered by a hunt group member (in seconds).
g3pkhunt	1.3.6.1.4.1.6889.2.8.1.64
INT g3pkhuntTage	1.3.6.1.4.1.6889.2.8.1.64.1	INTEGER	read-only	The number of timeticks since the peak hunt group data was last extracted from the switch by the Proxy Agent. This object along with the g3pkhuntintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3pkhuntTintvl	1.3.6.1.4.1.6889.2.8.1.64.2	INTEGER	read-write	An object containing the interval for which the peak hunt group data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for peak hunt group objects is received by the agent it uses the g3pkhuntage and g3pkhuntintvl objects to determine whether it should refresh the cached pkhuntTable. If g3pkhuntstmp + g3pkhuntintvl is less than the current value of the sysUpTime object then the agent refreshes the pkhuntTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3pkhuntTdelay	1.3.6.1.4.1.6889.2.8.1.64.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3pkhuntTretrieve	1.3.6.1.4.1.6889.2.8.1.64.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3pkhuntTcount	1.3.6.1.4.1.6889.2.8.1.64.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3pkhuntTable	1.3.6.1.4.1.6889.2.8.1.64.6		not-accessible	A list of g3pkhunt entries.
g3pkhuntEntry	1.3.6.1.4.1.6889.2.8.1.64.6.1		not-accessible	A g3pkhunt entry containing objects of the g3pkhunt information sent by the switch.
INT g3pkhuntHuntGroup	1.3.6.1.4.1.6889.2.8.1.64.6.1.1	INTEGER	read-only	An object containing the hunt group number.
INT g3pkhuntMeasHour	1.3.6.1.4.1.6889.2.8.1.64.6.1.2	INTEGER	read-only	An object containing the Hour the measurement was taken.
INT g3pkhuntYear	1.3.6.1.4.1.6889.2.8.1.64.6.1.3	INTEGER	read-only	An object containing the Year the command was executed.
INT g3pkhuntMonth	1.3.6.1.4.1.6889.2.8.1.64.6.1.4	INTEGER	read-only	An object containing the Month the command was executed.
INT g3pkhuntDay	1.3.6.1.4.1.6889.2.8.1.64.6.1.5	INTEGER	read-only	An object containing the Day the command was executed.
INT g3pkhuntHour	1.3.6.1.4.1.6889.2.8.1.64.6.1.6	INTEGER	read-only	An object containing the Hour the command was executed.
INT g3pkhuntGroupSize	1.3.6.1.4.1.6889.2.8.1.64.6.1.7	INTEGER	read-only	An object containing the total number of members in the trunk group.
INT g3pkhuntTotalUsage	1.3.6.1.4.1.6889.2.8.1.64.6.1.8	INTEGER	read-only	An object containing the sum of all times that the members of the hunt group are busy on hunt group calls (in CCS).
INT g3pkhuntCallsAns	1.3.6.1.4.1.6889.2.8.1.64.6.1.9	INTEGER	read-only	An object containing the total number of calls that are answered by the hunt group.
INT g3pkhuntCallsAban	1.3.6.1.4.1.6889.2.8.1.64.6.1.10	INTEGER	read-only	An object containing the total number of calls that attempt to reach the hunt group but abandon the attempt before being answered.
INT g3pkhuntQueSiz	1.3.6.1.4.1.6889.2.8.1.64.6.1.11	INTEGER	read-only	An object containing the length of the queue assigned to the hunt group during administration.
INT g3pkhuntCallsQue	1.3.6.1.4.1.6889.2.8.1.64.6.1.12	INTEGER	read-only	An object containing the total number of calls that arrive to find all members of the hunt group busy and are placed in the queue.
INT g3pkhuntQueOvfl	1.3.6.1.4.1.6889.2.8.1.64.6.1.13	INTEGER	read-only	An object containing the number of calls that arrive when all slots in the hunt group queue are occupied.
INT g3pkhuntTimeAvail	1.3.6.1.4.1.6889.2.8.1.64.6.1.14	INTEGER	read-only	An object containing the total time that the hunt group extensions are not in use but are available to receive hunt group calls (in CCS).
INT g3pkhuntSpeedAns	1.3.6.1.4.1.6889.2.8.1.64.6.1.15	INTEGER	read-only	An object containing the average time interval from when the call first enters the hunt group or hunt group queue until the call is answered by a hunt group member (in seconds).
g3huntlist	1.3.6.1.4.1.6889.2.8.1.65
INT g3huntlistTage	1.3.6.1.4.1.6889.2.8.1.65.1	INTEGER	read-only	The number of timeticks since the hunt group list data was last extracted from the switch by the Proxy Agent. This object along with the g3huntlistintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3huntlistTintvl	1.3.6.1.4.1.6889.2.8.1.65.2	INTEGER	read-write	An object containing the interval for which the hunt group list data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for hunt group list objects is received by the agent it uses the g3huntlistage and g3huntlistintvl objects to determine whether it should refresh the cached huntlistTable. If g3huntliststmp + g3huntlistintvl is less than the current value of the sysUpTime object then the agent refreshes the huntlistTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3huntlistTdelay	1.3.6.1.4.1.6889.2.8.1.65.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3huntlistTretrieve	1.3.6.1.4.1.6889.2.8.1.65.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3huntlistTcount	1.3.6.1.4.1.6889.2.8.1.65.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3huntlistTable	1.3.6.1.4.1.6889.2.8.1.65.6		not-accessible	A list of g3huntlist entries.
g3huntlistEntry	1.3.6.1.4.1.6889.2.8.1.65.6.1		not-accessible	A g3huntlist entry containing objects of the g3huntlist information sent by the switch.
INT g3huntlistHGNumber	1.3.6.1.4.1.6889.2.8.1.65.6.1.1	INTEGER	read-only	An object containing the number of the hunt group.
STR g3huntlistName	1.3.6.1.4.1.6889.2.8.1.65.6.1.2	DisplayString	read-only	A DisplayString Object containing the name of the hunt group.
INT g3huntlistExtension	1.3.6.1.4.1.6889.2.8.1.65.6.1.3	INTEGER	read-only	An object containing the extension of the hunt group.
STR g3huntlistType	1.3.6.1.4.1.6889.2.8.1.65.6.1.4	DisplayString	read-only	A DisplayString Object containing the type of hunt group.
g3tonerec	1.3.6.1.4.1.6889.2.8.1.66
INT g3tonerecTage	1.3.6.1.4.1.6889.2.8.1.66.1	INTEGER	read-only	The number of timeticks since the tone receiver data was last extracted from the switch by the Proxy Agent. This object along with the g3tonerecintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3tonerecTintvl	1.3.6.1.4.1.6889.2.8.1.66.2	INTEGER	read-write	An object containing the interval for which the tone receiver data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for tone receiver objects is received by the agent it uses the g3tonerecage and g3tonerecintvl objects to determine whether it should refresh the cached tonerecTable. If g3tonerecstmp + g3tonerecintvl is less than the current value of the sysUpTime object then the agent refreshes the tonerecTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3tonerecTdelay	1.3.6.1.4.1.6889.2.8.1.66.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3tonerecTretrieve	1.3.6.1.4.1.6889.2.8.1.66.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3tonerecTcount	1.3.6.1.4.1.6889.2.8.1.66.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3tonerecTable	1.3.6.1.4.1.6889.2.8.1.66.6		not-accessible	A list of g3tonerec entries.
g3tonerecEntry	1.3.6.1.4.1.6889.2.8.1.66.6.1		not-accessible	A g3tonerec entry containing objects of the g3tonerec information sent by the switch.
INT g3tonerecPNNumber	1.3.6.1.4.1.6889.2.8.1.66.6.1.1	INTEGER	read-only	An object containing the Port Network number in which the tone receiver is located.
INT g3tonerecMeasHour	1.3.6.1.4.1.6889.2.8.1.66.6.1.2	INTEGER	read-only	An object containing the Hour the measurement was taken.
INT g3tonerecYear	1.3.6.1.4.1.6889.2.8.1.66.6.1.3	INTEGER	read-only	An object containing the Year the command was executed.
INT g3tonerecMonth	1.3.6.1.4.1.6889.2.8.1.66.6.1.4	INTEGER	read-only	An object containing the Month the command was executed.
INT g3tonerecDay	1.3.6.1.4.1.6889.2.8.1.66.6.1.5	INTEGER	read-only	An object containing the Day the command was executed.
INT g3tonerecHour	1.3.6.1.4.1.6889.2.8.1.66.6.1.6	INTEGER	read-only	An object containing the Hour the command was executed.
INT g3tonerecDTMFPnReq	1.3.6.1.4.1.6889.2.8.1.66.6.1.7	INTEGER	read-only	An object containing the number of DTMF requests within the PN.
INT g3tonerecDTMFPnAlloc	1.3.6.1.4.1.6889.2.8.1.66.6.1.8	INTEGER	read-only	An object containing the total number of DTMF receivers located in the listed PN that were allocated during the last hour.
INT g3tonerecDTMFPkAlloc	1.3.6.1.4.1.6889.2.8.1.66.6.1.9	INTEGER	read-only	An object containing the peak number of DTMF receivers located in the listed PN that were in use simulatneously.
INT g3tonerecDTMFTotOffPN	1.3.6.1.4.1.6889.2.8.1.66.6.1.10	INTEGER	read-only	An object containing the total number of DTMF receivers allocated of a different PN for requests originated on this PN.
INT g3tonerecDTMFPkOffPN	1.3.6.1.4.1.6889.2.8.1.66.6.1.11	INTEGER	read-only	An object containing the peak number of DTMF receivers simultaneously allocated on a different PN for requests originated on this PN.
INT g3tonerecGPTDPnReq	1.3.6.1.4.1.6889.2.8.1.66.6.1.12	INTEGER	read-only	An object containing the number of GPTD requests within the PN.
INT g3tonerecGPTDPnAlloc	1.3.6.1.4.1.6889.2.8.1.66.6.1.13	INTEGER	read-only	An object containing the total number of GPTD receivers located in the listed PN that were allocated during the last hour.
INT g3tonerecGPTDPkAlloc	1.3.6.1.4.1.6889.2.8.1.66.6.1.14	INTEGER	read-only	An object containing the peak number of GPTD receivers located in the listed PN that were in use simulatneously.
INT g3tonerecGPTDTotOffPN	1.3.6.1.4.1.6889.2.8.1.66.6.1.15	INTEGER	read-only	An object containing the total number of GPTD receivers allocated of a different PN for requests originated on this PN.
INT g3tonerecGPTDPkOffPN	1.3.6.1.4.1.6889.2.8.1.66.6.1.16	INTEGER	read-only	An object containing the peak number of GPTD receivers simultaneously allocated on a different PN for requests originated on this PN.
INT g3tonerecCCTTRPnReq	1.3.6.1.4.1.6889.2.8.1.66.6.1.17	INTEGER	read-only	An object containing the number of CC-TTR requests within the PN.
INT g3tonerecCCTTRPnAlloc	1.3.6.1.4.1.6889.2.8.1.66.6.1.18	INTEGER	read-only	An object containing the total number of CC-TTR receivers located in the listed PN that were allocated during the last hour.
INT g3tonerecCCTTRPkAlloc	1.3.6.1.4.1.6889.2.8.1.66.6.1.19	INTEGER	read-only	An object containing the peak number of CC-TTR receivers located in the listed PN that were in use simulatneously.
INT g3tonerecCCTTRTotOffPN	1.3.6.1.4.1.6889.2.8.1.66.6.1.20	INTEGER	read-only	An object containing the total number of CC-TTR receivers allocated of a different PN for requests originated on this PN.
INT g3tonerecCCTTRPkOffPN	1.3.6.1.4.1.6889.2.8.1.66.6.1.21	INTEGER	read-only	An object containing the peak number of CC-TTR receivers simultaneously allocated on a different PN for requests originated on this PN.
INT g3tonerecCCCPTRPnReq	1.3.6.1.4.1.6889.2.8.1.66.6.1.22	INTEGER	read-only	An object containing the number of CC-CPTR requests within the PN.
INT g3tonerecCCCPTRPnAlloc	1.3.6.1.4.1.6889.2.8.1.66.6.1.23	INTEGER	read-only	An object containing the total number of CC-CPTR receivers located in the listed PN that were allocated during the last hour.
INT g3tonerecCCCPTRPkAlloc	1.3.6.1.4.1.6889.2.8.1.66.6.1.24	INTEGER	read-only	An object containing the peak number of CC-CPTR receivers located in the listed PN that were in use simulatneously.
INT g3tonerecCCCPTRTotOffPN	1.3.6.1.4.1.6889.2.8.1.66.6.1.25	INTEGER	read-only	An object containing the total number of CC-CPTR receivers allocated of a different PN for requests originated on this PN.
INT g3tonerecCCCPTRPkOffPN	1.3.6.1.4.1.6889.2.8.1.66.6.1.26	INTEGER	read-only	An object containing the peak number of CC-CPTR receivers simultaneously allocated on a different PN for requests originated on this PN.
INT g3tonerecCCMFCRPnReq	1.3.6.1.4.1.6889.2.8.1.66.6.1.27	INTEGER	read-only	An object containing the number of CC-MFCR requests within the PN.
INT g3tonerecCCMFCRPnAlloc	1.3.6.1.4.1.6889.2.8.1.66.6.1.28	INTEGER	read-only	An object containing the total number of CC-MFCR receivers located in the listed PN that were allocated during the last hour.
INT g3tonerecCCMFCRPkAlloc	1.3.6.1.4.1.6889.2.8.1.66.6.1.29	INTEGER	read-only	An object containing the peak number of CC-MFCR receivers located in the listed PN that were in use simulatneously.
INT g3tonerecCCMFCRTotOffPN	1.3.6.1.4.1.6889.2.8.1.66.6.1.30	INTEGER	read-only	An object containing the total number of CC-MFCR receivers allocated of a different PN for requests originated on this PN.
INT g3tonerecCCMFCRPkOffPN	1.3.6.1.4.1.6889.2.8.1.66.6.1.31	INTEGER	read-only	An object containing the peak number of CC-MFCR receivers simultaneously allocated on a different PN for requests originated on this PN.
g3pktonerec	1.3.6.1.4.1.6889.2.8.1.67
INT g3pktonerecTage	1.3.6.1.4.1.6889.2.8.1.67.1	INTEGER	read-only	The number of timeticks since the tone receiver data was last extracted from the switch by the Proxy Agent. This object along with the g3tonerecintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3pktonerecTintvl	1.3.6.1.4.1.6889.2.8.1.67.2	INTEGER	read-write	An object containing the interval for which the tone receiver data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for tone receiver objects is received by the agent it uses the g3tonerecage and g3tonerecintvl objects to determine whether it should refresh the cached tonerecTable. If g3tonerecstmp + g3tonerecintvl is less than the current value of the sysUpTime object then the agent refreshes the tonerecTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3pktonerecTdelay	1.3.6.1.4.1.6889.2.8.1.67.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3pktonerecTretrieve	1.3.6.1.4.1.6889.2.8.1.67.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3pktonerecTcount	1.3.6.1.4.1.6889.2.8.1.67.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3pktonerecTable	1.3.6.1.4.1.6889.2.8.1.67.6		not-accessible	A list of g3pktonerec entries.
g3pktonerecEntry	1.3.6.1.4.1.6889.2.8.1.67.6.1		not-accessible	A g3pktonerec entry containing objects of the g3pktonerec information sent by the switch.
INT g3pktonerecPNNumber	1.3.6.1.4.1.6889.2.8.1.67.6.1.1	INTEGER	read-only	An object containing the Port Network number in which the tone receiver is located.
INT g3pktonerecMeasHour	1.3.6.1.4.1.6889.2.8.1.67.6.1.2	INTEGER	read-only	An object containing the Hour the measurement was taken.
INT g3pktonerecYear	1.3.6.1.4.1.6889.2.8.1.67.6.1.3	INTEGER	read-only	An object containing the Year the command was executed.
INT g3pktonerecMonth	1.3.6.1.4.1.6889.2.8.1.67.6.1.4	INTEGER	read-only	An object containing the Month the command was executed.
INT g3pktonerecDay	1.3.6.1.4.1.6889.2.8.1.67.6.1.5	INTEGER	read-only	An object containing the Day the command was executed.
INT g3pktonerecHour	1.3.6.1.4.1.6889.2.8.1.67.6.1.6	INTEGER	read-only	An object containing the Hour the command was executed.
INT g3pktonerecDTMFPnReq	1.3.6.1.4.1.6889.2.8.1.67.6.1.7	INTEGER	read-only	An object containing the number of DTMF requests within the PN.
INT g3pktonerecDTMFPnAlloc	1.3.6.1.4.1.6889.2.8.1.67.6.1.8	INTEGER	read-only	An object containing the total number of DTMF receivers located in the listed PN that were allocated during the last hour.
INT g3pktonerecDTMFPkAlloc	1.3.6.1.4.1.6889.2.8.1.67.6.1.9	INTEGER	read-only	An object containing the peak number of DTMF receivers located in the listed PN that were in use simulatneously.
INT g3pktonerecDTMFTotOffPN	1.3.6.1.4.1.6889.2.8.1.67.6.1.10	INTEGER	read-only	An object containing the total number of DTMF receivers allocated of a different PN for requests originated on this PN.
INT g3pktonerecDTMFPkOffPN	1.3.6.1.4.1.6889.2.8.1.67.6.1.11	INTEGER	read-only	An object containing the peak number of DTMF receivers simultaneously allocated on a different PN for requests originated on this PN.
INT g3pktonerecGPTDPnReq	1.3.6.1.4.1.6889.2.8.1.67.6.1.12	INTEGER	read-only	An object containing the number of GPTD requests within the PN.
INT g3pktonerecGPTDPnAlloc	1.3.6.1.4.1.6889.2.8.1.67.6.1.13	INTEGER	read-only	An object containing the total number of GPTD receivers located in the listed PN that were allocated during the last hour.
INT g3pktonerecGPTDPkAlloc	1.3.6.1.4.1.6889.2.8.1.67.6.1.14	INTEGER	read-only	An object containing the peak number of GPTD receivers located in the listed PN that were in use simulatneously.
INT g3pktonerecGPTDTotOffPN	1.3.6.1.4.1.6889.2.8.1.67.6.1.15	INTEGER	read-only	An object containing the total number of GPTD receivers allocated of a different PN for requests originated on this PN.
INT g3pktonerecGPTDPkOffPN	1.3.6.1.4.1.6889.2.8.1.67.6.1.16	INTEGER	read-only	An object containing the peak number of GPTD receivers simultaneously allocated on a different PN for requests originated on this PN.
INT g3pktonerecCCTTRPnReq	1.3.6.1.4.1.6889.2.8.1.67.6.1.17	INTEGER	read-only	An object containing the number of CC-TTR requests within the PN.
INT g3pktonerecCCTTRPnAlloc	1.3.6.1.4.1.6889.2.8.1.67.6.1.18	INTEGER	read-only	An object containing the total number of CC-TTR receivers located in the listed PN that were allocated during the last hour.
INT g3pktonerecCCTTRPkAlloc	1.3.6.1.4.1.6889.2.8.1.67.6.1.19	INTEGER	read-only	An object containing the peak number of CC-TTR receivers located in the listed PN that were in use simulatneously.
INT g3pktonerecCCTTRTotOffPN	1.3.6.1.4.1.6889.2.8.1.67.6.1.20	INTEGER	read-only	An object containing the total number of CC-TTR receivers allocated of a different PN for requests originated on this PN.
INT g3pktonerecCCTTRPkOffPN	1.3.6.1.4.1.6889.2.8.1.67.6.1.21	INTEGER	read-only	An object containing the peak number of CC-TTR receivers simultaneously allocated on a different PN for requests originated on this PN.
INT g3pktonerecCCCPTRPnReq	1.3.6.1.4.1.6889.2.8.1.67.6.1.22	INTEGER	read-only	An object containing the number of CC-CPTR requests within the PN.
INT g3pktonerecCCCPTRPnAlloc	1.3.6.1.4.1.6889.2.8.1.67.6.1.23	INTEGER	read-only	An object containing the total number of CC-CPTR receivers located in the listed PN that were allocated during the last hour.
INT g3pktonerecCCCPTRPkAlloc	1.3.6.1.4.1.6889.2.8.1.67.6.1.24	INTEGER	read-only	An object containing the peak number of CC-CPTR receivers located in the listed PN that were in use simulatneously.
INT g3pktonerecCCCPTRTotOffPN	1.3.6.1.4.1.6889.2.8.1.67.6.1.25	INTEGER	read-only	An object containing the total number of CC-CPTR receivers allocated of a different PN for requests originated on this PN.
INT g3pktonerecCCCPTRPkOffPN	1.3.6.1.4.1.6889.2.8.1.67.6.1.26	INTEGER	read-only	An object containing the peak number of CC-CPTR receivers simultaneously allocated on a different PN for requests originated on this PN.
INT g3pktonerecCCMFCRPnReq	1.3.6.1.4.1.6889.2.8.1.67.6.1.27	INTEGER	read-only	An object containing the number of CC-MFCR requests within the PN.
INT g3pktonerecCCMFCRPnAlloc	1.3.6.1.4.1.6889.2.8.1.67.6.1.28	INTEGER	read-only	An object containing the total number of CC-MFCR receivers located in the listed PN that were allocated during the last hour.
INT g3pktonerecCCMFCRPkAlloc	1.3.6.1.4.1.6889.2.8.1.67.6.1.29	INTEGER	read-only	An object containing the peak number of CC-MFCR receivers located in the listed PN that were in use simulatneously.
INT g3pktonerecCCMFCRTotOffPN	1.3.6.1.4.1.6889.2.8.1.67.6.1.30	INTEGER	read-only	An object containing the total number of CC-MFCR receivers allocated of a different PN for requests originated on this PN.
INT g3pktonerecCCMFCRPkOffPN	1.3.6.1.4.1.6889.2.8.1.67.6.1.31	INTEGER	read-only	An object containing the peak number of CC-MFCR receivers simultaneously allocated on a different PN for requests originated on this PN.
g3tonerecsum	1.3.6.1.4.1.6889.2.8.1.68
INT g3tonerecsumTage	1.3.6.1.4.1.6889.2.8.1.68.1	INTEGER	read-only	The number of timeticks since the tone receiver summary data was last extracted from the switch by the Proxy Agent. This object along with the g3tonerecsumintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3tonerecsumTintvl	1.3.6.1.4.1.6889.2.8.1.68.2	INTEGER	read-write	An object containing the interval for which the tone receiver summary data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for tone receiver summary objects is received by the agent it uses the g3tonerecsumage and g3tonerecsumintvl objects to determine whether it should refresh the cached tonerecsumTable. If g3tonerecsumstmp + g3tonerecsumintvl is less than the current value of the sysUpTime object then the agent refreshes the tonerecsumTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3tonerecsumTdelay	1.3.6.1.4.1.6889.2.8.1.68.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3tonerecsumTretrieve	1.3.6.1.4.1.6889.2.8.1.68.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
INT g3tonerecsumRunYear	1.3.6.1.4.1.6889.2.8.1.68.5	INTEGER	read-only	An object containing the Year the command was executed.
INT g3tonerecsumRunMonth	1.3.6.1.4.1.6889.2.8.1.68.6	INTEGER	read-only	An object containing the Month the command was executed.
INT g3tonerecsumRunDay	1.3.6.1.4.1.6889.2.8.1.68.7	INTEGER	read-only	An object containing the Day the command was executed.
INT g3tonerecsumRunHour	1.3.6.1.4.1.6889.2.8.1.68.8	INTEGER	read-only	An object containing the Hour the measurement was taken.
INT g3tonerecsumDTMFHour	1.3.6.1.4.1.6889.2.8.1.68.9	INTEGER	read-only	An object containing the Hour the measurement was taken.
INT g3tonerecsumDTMFTReq	1.3.6.1.4.1.6889.2.8.1.68.10	INTEGER	read-only	An object containing the system-wide total number of requests for tone receivers of this type for the measurement interval.
INT g3tonerecsumDTMFPReq	1.3.6.1.4.1.6889.2.8.1.68.11	INTEGER	read-only	An object containing the system-wide peak number of simultaneous requests for tone receivers of this type that occurred at any one time over the measurement interval.
INT g3tonerecsumDTMFTQueue	1.3.6.1.4.1.6889.2.8.1.68.12	INTEGER	read-only	An object containing the system-wide total number of requests queued for tone receivers of this type during the measurement interval.
INT g3tonerecsumDTMFPQueue	1.3.6.1.4.1.6889.2.8.1.68.13	INTEGER	read-only	An object containing the system-wide peak number of requests queued at any one time during the measurement hour for tone receivers of this type.
INT g3tonerecsumDTMFTDeny	1.3.6.1.4.1.6889.2.8.1.68.14	INTEGER	read-only	An object containing the system-wide total number of requests that were denied because no receivers of this type were available during the measurement hour.
INT g3tonerecsumDTMFPDeny	1.3.6.1.4.1.6889.2.8.1.68.15	INTEGER	read-only	An object containing the system-wide peak number of requests that were denied at any one time because no receivers of this type were available during the measurement hour.
INT g3tonerecsumGPTDHour	1.3.6.1.4.1.6889.2.8.1.68.16	INTEGER	read-only	An object containing the Hour the measurement was taken.
INT g3tonerecsumGPTDTReq	1.3.6.1.4.1.6889.2.8.1.68.17	INTEGER	read-only	An object containing the system-wide total number of requests for tone receivers of this type for the measurement interval.
INT g3tonerecsumGPTDPReq	1.3.6.1.4.1.6889.2.8.1.68.18	INTEGER	read-only	An object containing the system-wide peak number of simultaneous requests for tone receivers of this type that occurred at any one time over the measurement interval.
INT g3tonerecsumGPTDTDeny	1.3.6.1.4.1.6889.2.8.1.68.19	INTEGER	read-only	An object containing the system-wide total number of requests that were denied because no receivers of this type were available during the measurement hour.
INT g3tonerecsumGPTDPDeny	1.3.6.1.4.1.6889.2.8.1.68.20	INTEGER	read-only	An object containing the system-wide peak number of requests that were denied at any one time because no receivers of this type were available during the measurement hour.
INT g3tonerecsumCCTTRHour	1.3.6.1.4.1.6889.2.8.1.68.21	INTEGER	read-only	An object containing the Hour the measurement was taken.
INT g3tonerecsumCCTTRTReq	1.3.6.1.4.1.6889.2.8.1.68.22	INTEGER	read-only	An object containing the system-wide total number of requests for tone receivers of this type for the measurement interval.
INT g3tonerecsumCCTTRPReq	1.3.6.1.4.1.6889.2.8.1.68.23	INTEGER	read-only	An object containing the system-wide peak number of simultaneous requests for tone receivers of this type that occurred at any one time over the measurement interval.
INT g3tonerecsumCCTTRTQueue	1.3.6.1.4.1.6889.2.8.1.68.24	INTEGER	read-only	An object containing the system-wide total number of requests queued for tone receivers of this type during the measurement interval.
INT g3tonerecsumCCTTRPQueue	1.3.6.1.4.1.6889.2.8.1.68.25	INTEGER	read-only	An object containing the system-wide peak number of requests queued at any one time during the measurement hour for tone receivers of this type.
INT g3tonerecsumCCTTRTDeny	1.3.6.1.4.1.6889.2.8.1.68.26	INTEGER	read-only	An object containing the system-wide total number of requests that were denied because no receivers of this type were available during the measurement hour.
INT g3tonerecsumCCTTRPDeny	1.3.6.1.4.1.6889.2.8.1.68.27	INTEGER	read-only	An object containing the system-wide peak number of requests that were denied at any one time because no receivers of this type were available during the measurement hour.
INT g3tonerecsumCCCPTRHour	1.3.6.1.4.1.6889.2.8.1.68.28	INTEGER	read-only	An object containing the Hour the measurement was taken.
INT g3tonerecsumCCCPTRTReq	1.3.6.1.4.1.6889.2.8.1.68.29	INTEGER	read-only	An object containing the system-wide total number of requests for tone receivers of this type for the measurement interval.
INT g3tonerecsumCCCPTRPReq	1.3.6.1.4.1.6889.2.8.1.68.30	INTEGER	read-only	An object containing the system-wide peak number of simultaneous requests for tone receivers of this type that occurred at any one time over the measurement interval.
INT g3tonerecsumCCCPTRTDeny	1.3.6.1.4.1.6889.2.8.1.68.31	INTEGER	read-only	An object containing the system-wide total number of requests that were denied because no receivers of this type were available during the measurement hour.
INT g3tonerecsumCCCPTRPDeny	1.3.6.1.4.1.6889.2.8.1.68.32	INTEGER	read-only	An object containing the system-wide peak number of requests that were denied at any one time because no receivers of this type were available during the measurement hour.
INT g3tonerecsumCCMFCRHour	1.3.6.1.4.1.6889.2.8.1.68.33	INTEGER	read-only	An object containing the Hour the measurement was taken.
INT g3tonerecsumCCMFCRTReq	1.3.6.1.4.1.6889.2.8.1.68.34	INTEGER	read-only	An object containing the system-wide total number of requests for tone receivers of this type for the measurement interval.
INT g3tonerecsumCCMFCRPReq	1.3.6.1.4.1.6889.2.8.1.68.35	INTEGER	read-only	An object containing the system-wide peak number of simultaneous requests for tone receivers of this type that occurred at any one time over the measurement interval.
INT g3tonerecsumCCMFCRTDeny	1.3.6.1.4.1.6889.2.8.1.68.36	INTEGER	read-only	An object containing the system-wide total number of requests that were denied because no receivers of this type were available during the measurement hour.
INT g3tonerecsumCCMFCRPDeny	1.3.6.1.4.1.6889.2.8.1.68.37	INTEGER	read-only	An object containing the system-wide peak number of requests that were denied at any one time because no receivers of this type were available during the measurement hour.
INT g3tonerecsumDTMRTAvail	1.3.6.1.4.1.6889.2.8.1.68.38	INTEGER	read-only	An object containing the number of ports available for the type of tone receiver.
INT g3tonerecsumGPRDTAvail	1.3.6.1.4.1.6889.2.8.1.68.39	INTEGER	read-only	An object containing the number of ports available for the type of tone receiver.
INT g3tonerecsumCLASTAvail	1.3.6.1.4.1.6889.2.8.1.68.40	INTEGER	read-only	An object containing the number of ports available for the type of tone receiver.
INT g3tonerecsumETRTAvail	1.3.6.1.4.1.6889.2.8.1.68.41	INTEGER	read-only	An object containing the number of ports available for the type of tone receiver.
g3pktonerecsum	1.3.6.1.4.1.6889.2.8.1.69
INT g3pktonerecsumTage	1.3.6.1.4.1.6889.2.8.1.69.1	INTEGER	read-only	The number of timeticks since the tone receiver summary data was last extracted from the switch by the Proxy Agent. This object along with the g3pktonerecsumintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3pktonerecsumTintvl	1.3.6.1.4.1.6889.2.8.1.69.2	INTEGER	read-write	An object containing the interval for which the tone receiver summary data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for tone receiver summary objects is received by the agent it uses the g3pktonerecsumage and g3pktonerecsumintvl objects to determine whether it should refresh the cached pktonerecsumTable. If pkg3tonerecsumstmp+pkg3tonerecsumintvl is less than the current value of the sysUpTime object then the agent refreshes the pktonerecsumTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3pktonerecsumTdelay	1.3.6.1.4.1.6889.2.8.1.69.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3pktonerecsumTretrieve	1.3.6.1.4.1.6889.2.8.1.69.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
INT g3pktonerecsumRunYear	1.3.6.1.4.1.6889.2.8.1.69.5	INTEGER	read-only	An object containing the Year the command was executed.
INT g3pktonerecsumRunMonth	1.3.6.1.4.1.6889.2.8.1.69.6	INTEGER	read-only	An object containing the Month the command was executed.
INT g3pktonerecsumRunDay	1.3.6.1.4.1.6889.2.8.1.69.7	INTEGER	read-only	An object containing the Day the command was executed.
INT g3pktonerecsumRunHour	1.3.6.1.4.1.6889.2.8.1.69.8	INTEGER	read-only	An object containing the Hour the measurement was taken.
INT g3pktonerecsumDTMFHour	1.3.6.1.4.1.6889.2.8.1.69.9	INTEGER	read-only	An object containing the Hour the measurement was taken.
INT g3pktonerecsumDTMFTReq	1.3.6.1.4.1.6889.2.8.1.69.10	INTEGER	read-only	An object containing the system-wide total number of requests for tone receivers of this type for the measurement interval.
INT g3pktonerecsumDTMFPReq	1.3.6.1.4.1.6889.2.8.1.69.11	INTEGER	read-only	An object containing the system-wide peak number of simultaneous requests for tone receivers of this type that occurred at any one time over the measurement interval.
INT g3pktonerecsumDTMFTQueue	1.3.6.1.4.1.6889.2.8.1.69.12	INTEGER	read-only	An object containing the system-wide total number of requests queued for tone receivers of this type during the measurement interval.
INT g3pktonerecsumDTMFPQueue	1.3.6.1.4.1.6889.2.8.1.69.13	INTEGER	read-only	An object containing the system-wide peak number of requests queued at any one time during the measurement hour for tone receivers of this type.
INT g3pktonerecsumDTMFTDeny	1.3.6.1.4.1.6889.2.8.1.69.14	INTEGER	read-only	An object containing the system-wide total number of requests that were denied because no receivers of this type were available during the measurement hour.
INT g3pktonerecsumDTMFPDeny	1.3.6.1.4.1.6889.2.8.1.69.15	INTEGER	read-only	An object containing the system-wide peak number of requests that were denied at any one time because no receivers of this type were
INT g3pktonerecsumGPTDHour	1.3.6.1.4.1.6889.2.8.1.69.16	INTEGER	read-only	An object containing the Hour the measurement was taken.
INT g3pktonerecsumGPTDTReq	1.3.6.1.4.1.6889.2.8.1.69.17	INTEGER	read-only	An object containing the system-wide total number of requests for tone receivers of this type for the measurement interval.
INT g3pktonerecsumGPTDPReq	1.3.6.1.4.1.6889.2.8.1.69.18	INTEGER	read-only	An object containing the system-wide peak number of simultaneous requests for tone receivers of this type that occurred at any one time over the measurement interval.
INT g3pktonerecsumGPTDTDeny	1.3.6.1.4.1.6889.2.8.1.69.19	INTEGER	read-only	An object containing the system-wide total number of requests that were denied because no receivers of this type were available during the measurement hour.
INT g3pktonerecsumGPTDPDeny	1.3.6.1.4.1.6889.2.8.1.69.20	INTEGER	read-only	An object containing the system-wide peak number of requests that were denied at any one time because no receivers of this type were available during the measurement hour.
INT g3pktonerecsumCCTTRHour	1.3.6.1.4.1.6889.2.8.1.69.21	INTEGER	read-only	An object containing the Hour the measurement was taken.
INT g3pktonerecsumCCTTRTReq	1.3.6.1.4.1.6889.2.8.1.69.22	INTEGER	read-only	An object containing the system-wide total number of requests for tone receivers of this type for the measurement interval.
INT g3pktonerecsumCCTTRPReq	1.3.6.1.4.1.6889.2.8.1.69.23	INTEGER	read-only	An object containing the system-wide peak number of simultaneous requests for tone receivers of this type that occurred at any one time over the measurement interval.
INT g3pktonerecsumCCTTRTQueue	1.3.6.1.4.1.6889.2.8.1.69.24	INTEGER	read-only	An object containing the system-wide total number of requests queued for tone receivers of this type during the measurement interval.
INT g3pktonerecsumCCTTRPQueue	1.3.6.1.4.1.6889.2.8.1.69.25	INTEGER	read-only	An object containing the system-wide peak number of requests queued at any one time during the measurement hour for tone receivers of this type.
INT g3pktonerecsumCCTTRTDeny	1.3.6.1.4.1.6889.2.8.1.69.26	INTEGER	read-only	An object containing the system-wide total number of requests that were denied because no receivers of this type were available during the measurement hour.
INT g3pktonerecsumCCTTRPDeny	1.3.6.1.4.1.6889.2.8.1.69.27	INTEGER	read-only	An object containing the system-wide peak number of requests that were denied at any one time because no receivers of this type were available during the measurement hour.
INT g3pktonerecsumCCCPTRHour	1.3.6.1.4.1.6889.2.8.1.69.28	INTEGER	read-only	An object containing the Hour the measurement was taken.
INT g3pktonerecsumCCCPTRTReq	1.3.6.1.4.1.6889.2.8.1.69.29	INTEGER	read-only	An object containing the system-wide total number of requests for tone receivers of this type for the measurement interval.
INT g3pktonerecsumCCCPTRPReq	1.3.6.1.4.1.6889.2.8.1.69.30	INTEGER	read-only	An object containing the system-wide peak number of simultaneous requests for tone receivers of this type that occurred at any one time over the measurement interval.
INT g3pktonerecsumCCCPTRTDeny	1.3.6.1.4.1.6889.2.8.1.69.31	INTEGER	read-only	An object containing the system-wide total number of requests that were denied because no receivers of this type were available during the measurement hour.
INT g3pktonerecsumCCCPTRPDeny	1.3.6.1.4.1.6889.2.8.1.69.32	INTEGER	read-only	An object containing the system-wide peak number of requests that were denied at any one time because no receivers of this type were available during the measurement hour.
INT g3pktonerecsumCCMFCRHour	1.3.6.1.4.1.6889.2.8.1.69.33	INTEGER	read-only	An object containing the Hour the measurement was taken.
INT g3pktonerecsumCCMFCRTReq	1.3.6.1.4.1.6889.2.8.1.69.34	INTEGER	read-only	An object containing the system-wide total number of requests for tone receivers of this type for the measurement interval.
INT g3pktonerecsumCCMFCRPReq	1.3.6.1.4.1.6889.2.8.1.69.35	INTEGER	read-only	An object containing the system-wide peak number of simultaneous requests for tone receivers of this type that occurred at any one time over the measurement interval.
INT g3pktonerecsumCCMFCRTDeny	1.3.6.1.4.1.6889.2.8.1.69.36	INTEGER	read-only	An object containing the system-wide total number of requests that were denied because no receivers of this type were available during the measurement hour.
INT g3pktonerecsumCCMFCRPDeny	1.3.6.1.4.1.6889.2.8.1.69.37	INTEGER	read-only	An object containing the system-wide peak number of requests that were denied at any one time because no receivers of this type were available during the measurement hour.
INT g3pktonerecsumDTMRTAvail	1.3.6.1.4.1.6889.2.8.1.69.38	INTEGER	read-only	An object containing the number of ports available for the type of tone receiver.
INT g3pktonerecsumGPRDTAvail	1.3.6.1.4.1.6889.2.8.1.69.39	INTEGER	read-only	An object containing the number of ports available for the type of tone receiver.
INT g3pktonerecsumCLASTAvail	1.3.6.1.4.1.6889.2.8.1.69.40	INTEGER	read-only	An object containing the number of ports available for the type of tone receiver.
INT g3pktonerecsumETRTAvail	1.3.6.1.4.1.6889.2.8.1.69.41	INTEGER	read-only	An object containing the number of ports available for the type of tone receiver.
g3rpatcfg	1.3.6.1.4.1.6889.2.8.1.70
INT g3rpatcfgTage	1.3.6.1.4.1.6889.2.8.1.70.1	INTEGER	read-only	The number of timeticks since the route pattern data was last extracted from the switch by the Proxy Agent. This object along with the g3rpatcfgintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3rpatcfgTintvl	1.3.6.1.4.1.6889.2.8.1.70.2	INTEGER	read-write	An object containing the interval for which the route pattern data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for route pattern objects is received by the agent it uses the g3rpatcfgage and g3rpatcfgintvl objects to determine whether it should refresh the cached rpatcfgTable. If g3rpatcfgstmp + g3rpatcfgintvl is less than the current value of the sysUpTime object then the agent refreshes the rpatcfgTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3rpatcfgTdelay	1.3.6.1.4.1.6889.2.8.1.70.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3rpatcfgTretrieve	1.3.6.1.4.1.6889.2.8.1.70.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3rpatcfgTcount	1.3.6.1.4.1.6889.2.8.1.70.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
INT g3rpatcfgPattern1	1.3.6.1.4.1.6889.2.8.1.70.6	INTEGER	read-only	An object containing the measurement 1 route pattern
INT g3rpatcfgPattern2	1.3.6.1.4.1.6889.2.8.1.70.7	INTEGER	read-only	An object containing the measurement 2 route pattern
INT g3rpatcfgPattern3	1.3.6.1.4.1.6889.2.8.1.70.8	INTEGER	read-only	An object containing the measurement 3 route pattern
INT g3rpatcfgPattern4	1.3.6.1.4.1.6889.2.8.1.70.9	INTEGER	read-only	An object containing the measurement 4 route pattern
INT g3rpatcfgPattern5	1.3.6.1.4.1.6889.2.8.1.70.10	INTEGER	read-only	An object containing the measurement 5 route pattern
INT g3rpatcfgPattern6	1.3.6.1.4.1.6889.2.8.1.70.11	INTEGER	read-only	An object containing the measurement 6 route pattern
INT g3rpatcfgPattern7	1.3.6.1.4.1.6889.2.8.1.70.12	INTEGER	read-only	An object containing the measurement 7 route pattern
INT g3rpatcfgPattern8	1.3.6.1.4.1.6889.2.8.1.70.13	INTEGER	read-only	An object containing the measurement 8 route pattern
INT g3rpatcfgPattern9	1.3.6.1.4.1.6889.2.8.1.70.14	INTEGER	read-only	An object containing the measurement 9 route pattern
INT g3rpatcfgPattern10	1.3.6.1.4.1.6889.2.8.1.70.15	INTEGER	read-only	An object containing the measurement 10 route pattern
INT g3rpatcfgPattern11	1.3.6.1.4.1.6889.2.8.1.70.16	INTEGER	read-only	An object containing the measurement 11 route pattern
INT g3rpatcfgPattern12	1.3.6.1.4.1.6889.2.8.1.70.17	INTEGER	read-only	An object containing the measurement 12 route pattern
INT g3rpatcfgPattern13	1.3.6.1.4.1.6889.2.8.1.70.18	INTEGER	read-only	An object containing the measurement 13 route pattern
INT g3rpatcfgPattern14	1.3.6.1.4.1.6889.2.8.1.70.19	INTEGER	read-only	An object containing the measurement 14 route pattern
INT g3rpatcfgPattern15	1.3.6.1.4.1.6889.2.8.1.70.20	INTEGER	read-only	An object containing the measurement 15 route pattern
INT g3rpatcfgPattern16	1.3.6.1.4.1.6889.2.8.1.70.21	INTEGER	read-only	An object containing the measurement 16 route pattern
INT g3rpatcfgPattern17	1.3.6.1.4.1.6889.2.8.1.70.22	INTEGER	read-only	An object containing the measurement 17 route pattern
INT g3rpatcfgPattern18	1.3.6.1.4.1.6889.2.8.1.70.23	INTEGER	read-only	An object containing the measurement 18 route pattern
INT g3rpatcfgPattern19	1.3.6.1.4.1.6889.2.8.1.70.24	INTEGER	read-only	An object containing the measurement 19 route pattern
INT g3rpatcfgPattern20	1.3.6.1.4.1.6889.2.8.1.70.25	INTEGER	read-only	An object containing the measurement 20 route pattern
INT g3rpatcfgPattern21	1.3.6.1.4.1.6889.2.8.1.70.26	INTEGER	read-only	An object containing the measurement 21 route pattern
INT g3rpatcfgPattern22	1.3.6.1.4.1.6889.2.8.1.70.27	INTEGER	read-only	An object containing the measurement 22 route pattern
INT g3rpatcfgPattern23	1.3.6.1.4.1.6889.2.8.1.70.28	INTEGER	read-only	An object containing the measurement 23 route pattern
INT g3rpatcfgPattern24	1.3.6.1.4.1.6889.2.8.1.70.29	INTEGER	read-only	An object containing the measurement 24 route pattern
INT g3rpatcfgPattern25	1.3.6.1.4.1.6889.2.8.1.70.30	INTEGER	read-only	An object containing the measurement 25 route pattern
g3rpat	1.3.6.1.4.1.6889.2.8.1.71
INT g3rpatTage	1.3.6.1.4.1.6889.2.8.1.71.1	INTEGER	read-only	The number of timeticks since the route pattern data was last extracted from the switch by the Proxy Agent. This object along with the g3rpatintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3rpatTintvl	1.3.6.1.4.1.6889.2.8.1.71.2	INTEGER	read-write	An object containing the interval for which the route pattern data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for route pattern objects is received by the agent it uses the g3rpatage and g3rpatintvl objects to determine whether it should refresh the cached rpatTable. If g3rpatstmp + g3rpatintvl is less than the current value of the sysUpTime object then the agent refreshes the rpatTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3rpatTdelay	1.3.6.1.4.1.6889.2.8.1.71.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3rpatTretrieve	1.3.6.1.4.1.6889.2.8.1.71.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3rpatTcount	1.3.6.1.4.1.6889.2.8.1.71.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3rpatTable	1.3.6.1.4.1.6889.2.8.1.71.6		not-accessible	A list of g3rpat entries.
g3rpatEntry	1.3.6.1.4.1.6889.2.8.1.71.6.1		not-accessible	A g3rpat entry containing objects of the g3rpat information sent by the switch.
INT g3rpatPattern	1.3.6.1.4.1.6889.2.8.1.71.6.1.1	INTEGER	read-only	An object containing the number of route pattern being measured.
INT g3rpatTrunkGroup	1.3.6.1.4.1.6889.2.8.1.71.6.1.2	INTEGER	read-only	An object containing the first trunk group number.
INT g3rpatYear	1.3.6.1.4.1.6889.2.8.1.71.6.1.3	INTEGER	read-only	An object containing the Year the command was executed.
INT g3rpatMonth	1.3.6.1.4.1.6889.2.8.1.71.6.1.4	INTEGER	read-only	An object containing the Month the command was executed.
INT g3rpatDay	1.3.6.1.4.1.6889.2.8.1.71.6.1.5	INTEGER	read-only	An object containing the Day the command was executed.
INT g3rpatHour	1.3.6.1.4.1.6889.2.8.1.71.6.1.6	INTEGER	read-only	An object containing the Hour the command was executed.
INT g3rpatQueueSize	1.3.6.1.4.1.6889.2.8.1.71.6.1.7	INTEGER	read-only	An object containing the length of the queue for the first trunk group in the route pattern.
INT g3rpatCallsOffered	1.3.6.1.4.1.6889.2.8.1.71.6.1.8	INTEGER	read-only	An object containing the total number of calls offered to the route pattern.
INT g3rpatCallsCarried	1.3.6.1.4.1.6889.2.8.1.71.6.1.9	INTEGER	read-only	An object containing the total number of seizures for all trunk groups in the routing pattern.
INT g3rpatCallsBlocked	1.3.6.1.4.1.6889.2.8.1.71.6.1.10	INTEGER	read-only	An object containing the number of outgoing calls that found all trunk groups in the pattern busy.
INT g3rpatCallsQueued	1.3.6.1.4.1.6889.2.8.1.71.6.1.11	INTEGER	read-only	An object containing the number of offered calls that found all trunk groups in the pattern busy and were placed in queue for the first trunk group in the pattern.
INT g3rpatQueueOvflo	1.3.6.1.4.1.6889.2.8.1.71.6.1.12	INTEGER	read-only	An object containing the number of calls that find the queue on the first trunk group full.
INT g3rpatCallsCarrd	1.3.6.1.4.1.6889.2.8.1.71.6.1.13	INTEGER	read-only	An object containing the percentage of total calls carried over the route pattern by the trunk group.
INT g3rpatTotalCalls	1.3.6.1.4.1.6889.2.8.1.71.6.1.14	INTEGER	read-only	An object containing the total number of calls carried by the route pattern over the trunk group.
INT g3rpatIndex	1.3.6.1.4.1.6889.2.8.1.71.6.1.15	INTEGER	read-only	An object containing an index for a route pattern/trunk group number combination to make a record unique.
g3pkrpat	1.3.6.1.4.1.6889.2.8.1.72
INT g3pkrpatTage	1.3.6.1.4.1.6889.2.8.1.72.1	INTEGER	read-only	The number of timeticks since the route pattern data was last extracted from the switch by the Proxy Agent. This object along with the g3rpatintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3pkrpatTintvl	1.3.6.1.4.1.6889.2.8.1.72.2	INTEGER	read-write	An object containing the interval for which the route pattern data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for route pattern objects is received by the agent it uses the g3rpatage and g3rpatintvl objects to determine whether it should refresh the cached rpatTable. If g3rpatstmp + g3rpatintvl is less than the current value of the sysUpTime object then the agent refreshes the rpatTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3pkrpatTdelay	1.3.6.1.4.1.6889.2.8.1.72.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3pkrpatTretrieve	1.3.6.1.4.1.6889.2.8.1.72.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3pkrpatTcount	1.3.6.1.4.1.6889.2.8.1.72.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3pkrpatTable	1.3.6.1.4.1.6889.2.8.1.72.6		not-accessible	A list of g3pkrpat entries.
g3pkrpatEntry	1.3.6.1.4.1.6889.2.8.1.72.6.1		not-accessible	A g3pkrpat entry containing objects of the g3pkrpat information sent by the switch.
INT g3pkrpatPattern	1.3.6.1.4.1.6889.2.8.1.72.6.1.1	INTEGER	read-only	An object containing the number of route pattern being measured.
INT g3pkrpatTrunkGroup	1.3.6.1.4.1.6889.2.8.1.72.6.1.2	INTEGER	read-only	An object containing the first trunk group number.
INT g3pkrpatYear	1.3.6.1.4.1.6889.2.8.1.72.6.1.3	INTEGER	read-only	An object containing the Year the command was executed.
INT g3pkrpatMonth	1.3.6.1.4.1.6889.2.8.1.72.6.1.4	INTEGER	read-only	An object containing the Month the command was executed.
INT g3pkrpatDay	1.3.6.1.4.1.6889.2.8.1.72.6.1.5	INTEGER	read-only	An object containing the Day the command was executed.
INT g3pkrpatHour	1.3.6.1.4.1.6889.2.8.1.72.6.1.6	INTEGER	read-only	An object containing the Hour the command was executed.
INT g3pkrpatQueueSize	1.3.6.1.4.1.6889.2.8.1.72.6.1.7	INTEGER	read-only	An object containing the length of the queue for the first trunk group in the route pattern.
INT g3pkrpatCallsOffered	1.3.6.1.4.1.6889.2.8.1.72.6.1.8	INTEGER	read-only	An object containing the total number of calls offered to the route pattern.
INT g3pkrpatCallsCarried	1.3.6.1.4.1.6889.2.8.1.72.6.1.9	INTEGER	read-only	An object containing the total number of seizures for all trunk groups in the routing pattern.
INT g3pkrpatCallsBlocked	1.3.6.1.4.1.6889.2.8.1.72.6.1.10	INTEGER	read-only	An object containing the number of outgoing calls that found all trunk groups in the pattern busy.
INT g3pkrpatCallsQueued	1.3.6.1.4.1.6889.2.8.1.72.6.1.11	INTEGER	read-only	An object containing the number of offered calls that found all trunk groups in the pattern busy and were placed in queue for the first trunk group in the pattern.
INT g3pkrpatQueueOvflo	1.3.6.1.4.1.6889.2.8.1.72.6.1.12	INTEGER	read-only	An object containing the number of calls that find the queue on the first trunk group full.
INT g3pkrpatCallsCarrd	1.3.6.1.4.1.6889.2.8.1.72.6.1.13	INTEGER	read-only	An object containing the percentage of total calls carried over the route pattern by the trunk group.
INT g3pkrpatTotalCalls	1.3.6.1.4.1.6889.2.8.1.72.6.1.14	INTEGER	read-only	An object containing the total number of calls carried by the route
INT g3pkrpatIndex	1.3.6.1.4.1.6889.2.8.1.72.6.1.15	INTEGER	read-only	An object containing an index for a route pattern/trunk group number combination to make a record unique.
g3secviolate	1.3.6.1.4.1.6889.2.8.1.73
INT g3secviolateTage	1.3.6.1.4.1.6889.2.8.1.73.1	INTEGER	read-only	The number of timeticks since the security violations data was last extracted from the switch by the Proxy Agent. This object along with the g3secviolateintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3secviolateTintvl	1.3.6.1.4.1.6889.2.8.1.73.2	INTEGER	read-write	An object containing the interval for which the security violations data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for security violations objects is received by the agent it uses the g3secviolateage and g3secviolateintvl objects to determine whether it should refresh the cached secviolateTable. If g3secviolatestmp + g3secviolateintvl is less than the current value of the sysUpTime object then the agent refreshes the secviolateTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3secviolateTdelay	1.3.6.1.4.1.6889.2.8.1.73.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3secviolateTretrieve	1.3.6.1.4.1.6889.2.8.1.73.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3secviolateTcount	1.3.6.1.4.1.6889.2.8.1.73.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3secviolateTable	1.3.6.1.4.1.6889.2.8.1.73.6		not-accessible	A list of g3secviolate entries.
g3secviolateEntry	1.3.6.1.4.1.6889.2.8.1.73.6.1		not-accessible	A g3secviolate entry containing objects of the g3secviolate information sent by the switch.
STR g3secviolatePortType	1.3.6.1.4.1.6889.2.8.1.73.6.1.1	DisplayString	read-only	An object containing the type of port to which the login was attempted.
INT g3secviolateYear	1.3.6.1.4.1.6889.2.8.1.73.6.1.2	INTEGER	read-only	An object containing the Year the command was executed.
INT g3secviolateMonth	1.3.6.1.4.1.6889.2.8.1.73.6.1.3	INTEGER	read-only	An object containing the Month the command was executed.
INT g3secviolateDay	1.3.6.1.4.1.6889.2.8.1.73.6.1.4	INTEGER	read-only	An object containing the Day the command was executed.
INT g3secviolateHour	1.3.6.1.4.1.6889.2.8.1.73.6.1.5	INTEGER	read-only	An object containing the Hour the command was executed.
STR g3secviolateCountSince	1.3.6.1.4.1.6889.2.8.1.73.6.1.6	DisplayString	read-only	An object containing the Year the command was executed.
INT g3secviolateValidBC	1.3.6.1.4.1.6889.2.8.1.73.6.1.7	INTEGER	read-only	An object containing the total number of times a user entered a valid barrier code.
INT g3secviolateInvalidBC	1.3.6.1.4.1.6889.2.8.1.73.6.1.8	INTEGER	read-only	An object containing the total number of times a user entered a invalid barrier code.
INT g3secviolateViolateBC	1.3.6.1.4.1.6889.2.8.1.73.6.1.9	INTEGER	read-only	An object containing the total number of security violations for barrier codes.
INT g3secviolateStnValidSSC	1.3.6.1.4.1.6889.2.8.1.73.6.1.10	INTEGER	read-only	An object containing the number of calls originating from stations that generated valid station security codes.
INT g3secviolateStnInvalidSSC	1.3.6.1.4.1.6889.2.8.1.73.6.1.11	INTEGER	read-only	An object containing the number of calls originating from stations that generated invalid station security codes.
INT g3secviolateTrkValidSSC	1.3.6.1.4.1.6889.2.8.1.73.6.1.12	INTEGER	read-only	An object containing the number of calls originating from trunks that generated valid station security codes.
INT g3secviolateTrkInvalidSSC	1.3.6.1.4.1.6889.2.8.1.73.6.1.13	INTEGER	read-only	An object containing the number of calls originating from trunks that generated invalid station security codes.
INT g3secviolateTtlValidSSC	1.3.6.1.4.1.6889.2.8.1.73.6.1.14	INTEGER	read-only	An object containing the number of total calls that generated valid station security codes.
INT g3secviolateTtlInvalidSSC	1.3.6.1.4.1.6889.2.8.1.73.6.1.15	INTEGER	read-only	An object containing the number of total calls that generated invalid station security codes.
INT g3secviolateTtlViolateSSC	1.3.6.1.4.1.6889.2.8.1.73.6.1.16	INTEGER	read-only	An object containing the number of total calls that generated station security violations.
INT g3secviolateStnValidAC	1.3.6.1.4.1.6889.2.8.1.73.6.1.17	INTEGER	read-only	An object containing the number of calls originating from stations that generated valid authorization codes.
INT g3secviolateStnInvalidAC	1.3.6.1.4.1.6889.2.8.1.73.6.1.18	INTEGER	read-only	An object containing the number of calls originating from stations that generated invalid authorization codes.
INT g3secviolateStnViolateAC	1.3.6.1.4.1.6889.2.8.1.73.6.1.19	INTEGER	read-only	An object containing the number of calls originating from stations that generated security violations for authorization codes.
INT g3secviolateTrkValidAC	1.3.6.1.4.1.6889.2.8.1.73.6.1.20	INTEGER	read-only	An object containing the number of calls originating from trunks that generated valid authorization codes.
INT g3secviolateTrkInvalidAC	1.3.6.1.4.1.6889.2.8.1.73.6.1.21	INTEGER	read-only	An object containing the number of calls originating from trunks that generated invalid authorization codes.
INT g3secviolateTrkViolateAC	1.3.6.1.4.1.6889.2.8.1.73.6.1.22	INTEGER	read-only	An object containing the number of calls originating from trunks that generated security violations for authorization codes.
INT g3secviolateRAValidAC	1.3.6.1.4.1.6889.2.8.1.73.6.1.23	INTEGER	read-only	An object containing the number of calls originating from remote access that generated valid authorization codes.
INT g3secviolateRAInvalidAC	1.3.6.1.4.1.6889.2.8.1.73.6.1.24	INTEGER	read-only	An object containing the number of calls originating from remote access that generated invalid authorization codes.
INT g3secviolateRAViolateAC	1.3.6.1.4.1.6889.2.8.1.73.6.1.25	INTEGER	read-only	An object containing the number of calls originating from remote access that generated security violations for authorization codes.
INT g3secviolateAtdValidAC	1.3.6.1.4.1.6889.2.8.1.73.6.1.26	INTEGER	read-only	An object containing the number of calls originating from attendants that generated valid authorization codes.
INT g3secviolateAtdInvalidAC	1.3.6.1.4.1.6889.2.8.1.73.6.1.27	INTEGER	read-only	An object containing the number of calls originating from attendants that generated invalid authorization codes.
INT g3secviolateAtdViolateAC	1.3.6.1.4.1.6889.2.8.1.73.6.1.28	INTEGER	read-only	An object containing the number of calls originating from attendants that generated security violations for authorization codes.
INT g3secviolateTtlValidAC	1.3.6.1.4.1.6889.2.8.1.73.6.1.29	INTEGER	read-only	An object containing the number of total calls that generated valid authorization codes.
INT g3secviolateTtlInvalidAC	1.3.6.1.4.1.6889.2.8.1.73.6.1.30	INTEGER	read-only	An object containing the number of total calls that generated invalid authorization codes.
INT g3secviolateTtlViolateAC	1.3.6.1.4.1.6889.2.8.1.73.6.1.31	INTEGER	read-only	An object containing the number of total calls that generated security violations for authorization codes.
INT g3secviolateLoginSuccess	1.3.6.1.4.1.6889.2.8.1.73.6.1.32	INTEGER	read-only	An object containing the total number of successful logins into the given port type.
INT g3secviolateInvalidAttempt	1.3.6.1.4.1.6889.2.8.1.73.6.1.33	INTEGER	read-only	An object containing the total number of login attempts where the login ID or password were invalid.
INT g3secviolateInvalidID	1.3.6.1.4.1.6889.2.8.1.73.6.1.34	INTEGER	read-only	An object containing the total number of login attempts where the login ID was invalid.
INT g3secviolateForceDsc	1.3.6.1.4.1.6889.2.8.1.73.6.1.35	INTEGER	read-only	An object containing the total number of login processes that were disconnected automatically by the switch because the threshold for consecutive invalid login attempts was exceeded.
INT g3secviolateSecViolate	1.3.6.1.4.1.6889.2.8.1.73.6.1.36	INTEGER	read-only	An object containing the total number of login security violations.
INT g3secviolateTrivialAttempt	1.3.6.1.4.1.6889.2.8.1.73.6.1.37	INTEGER	read-only	An object containing the total number of times a user connected to the system and gave no input to the login sequence.
g3cbctrunk	1.3.6.1.4.1.6889.2.8.1.74
INT g3cbctrunkTage	1.3.6.1.4.1.6889.2.8.1.74.1	INTEGER	read-only	The number of timeticks since the cbc trunk group data was last extracted from the switch by the Proxy Agent. This object along with the g3cbctrunkintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3cbctrunkTintvl	1.3.6.1.4.1.6889.2.8.1.74.2	INTEGER	read-write	An object containing the interval for which the cbc trunk group data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for cbc trunk group objects is received by the agent it uses the g3cbctrunkage and g3cbctrunkintvl objects to determine whether it should refresh the cached cbctrunkTable. If g3cbctrunkstmp + g3cbctrunkintvl is less than the current value of the sysUpTime object then the agent refreshes the cbctrunkTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3cbctrunkTdelay	1.3.6.1.4.1.6889.2.8.1.74.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3cbctrunkTretrieve	1.3.6.1.4.1.6889.2.8.1.74.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3cbctrunkTcount	1.3.6.1.4.1.6889.2.8.1.74.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3cbctrunkTable	1.3.6.1.4.1.6889.2.8.1.74.6		not-accessible	A list of g3cbctrunk entries.
g3cbctrunkEntry	1.3.6.1.4.1.6889.2.8.1.74.6.1		not-accessible	A g3cbctrunk entry containing objects of the g3cbctrunk information sent by the switch.
INT g3cbctrunkTGNumber	1.3.6.1.4.1.6889.2.8.1.74.6.1.1	INTEGER	read-only	An object containing the trunk group number.
STR g3cbctrunkServiceName	1.3.6.1.4.1.6889.2.8.1.74.6.1.2	DisplayString	read-only	An object containing the name of the services or features for which the associated measurements are being reported.
INT g3cbctrunkYear	1.3.6.1.4.1.6889.2.8.1.74.6.1.3	INTEGER	read-only	An object containing the Year the command was executed.
INT g3cbctrunkMonth	1.3.6.1.4.1.6889.2.8.1.74.6.1.4	INTEGER	read-only	An object containing the Month the command was executed.
INT g3cbctrunkDay	1.3.6.1.4.1.6889.2.8.1.74.6.1.5	INTEGER	read-only	An object containing the Day the command was executed.
INT g3cbctrunkHour	1.3.6.1.4.1.6889.2.8.1.74.6.1.6	INTEGER	read-only	An object containing the Hour the command was executed.
INT g3cbctrunkQueueSize	1.3.6.1.4.1.6889.2.8.1.74.6.1.7	INTEGER	read-only	An object containing the size of the trunk group queue.
INT g3cbctrunkCallsQueued	1.3.6.1.4.1.6889.2.8.1.74.6.1.8	INTEGER	read-only	An object containing the total number of calls that entered the queue.
INT g3cbctrunkQueueOvflw	1.3.6.1.4.1.6889.2.8.1.74.6.1.9	INTEGER	read-only	An object containing the total number of calls that were denied access to the trunk, found the queue full, and received reorder tone.
INT g3cbctrunkQueueAband	1.3.6.1.4.1.6889.2.8.1.74.6.1.10	INTEGER	read-only	An object containing the total number of calls that were removed from the queue by the system or the user.
INT g3cbctrunkTrunksOOS	1.3.6.1.4.1.6889.2.8.1.74.6.1.11	INTEGER	read-only	An object containing the total number of trunks in the group that were out-of-service when measurements were collected.
INT g3cbctrunkPlan1	1.3.6.1.4.1.6889.2.8.1.74.6.1.12	INTEGER	read-only	An object containing the first usage allocation plan number (if any).
INT g3cbctrunkPlan2	1.3.6.1.4.1.6889.2.8.1.74.6.1.13	INTEGER	read-only	An object containing the second usage allocation plan number (if any).
INT g3cbctrunkPlan3	1.3.6.1.4.1.6889.2.8.1.74.6.1.14	INTEGER	read-only	An object containing the third usage allocation plan number (if any).
INT g3cbctrunkPlan4	1.3.6.1.4.1.6889.2.8.1.74.6.1.15	INTEGER	read-only	An object containing the fourth usage allocation plan number (if any).
INT g3cbctrunkPlan5	1.3.6.1.4.1.6889.2.8.1.74.6.1.16	INTEGER	read-only	An object containing the fifth usage allocation plan number (if any).
INT g3cbctrunkPlan6	1.3.6.1.4.1.6889.2.8.1.74.6.1.17	INTEGER	read-only	An object containing the sixth usage allocation plan number (if any).
INT g3cbctrunkDur1	1.3.6.1.4.1.6889.2.8.1.74.6.1.18	INTEGER	read-only	An object containing the first usage allocation plan duration (in minutes) that the first plan was in effect (if any).
INT g3cbctrunkDur2	1.3.6.1.4.1.6889.2.8.1.74.6.1.19	INTEGER	read-only	An object containing the second usage allocation plan duration (in minutes) that the second plan was in effect (if any).
INT g3cbctrunkDur3	1.3.6.1.4.1.6889.2.8.1.74.6.1.20	INTEGER	read-only	An object containing the third usage allocation plan duration (in minutes) that the third plan was in effect (if any).
INT g3cbctrunkDur4	1.3.6.1.4.1.6889.2.8.1.74.6.1.21	INTEGER	read-only	An object containing the fourth usage allocation plan duration (in minutes) that the fourth plan was in effect (if any).
INT g3cbctrunkDur5	1.3.6.1.4.1.6889.2.8.1.74.6.1.22	INTEGER	read-only	An object containing the fifth usage allocation plan duration (in minutes) that the fifth plan was in effect (if any).
INT g3cbctrunkDur6	1.3.6.1.4.1.6889.2.8.1.74.6.1.23	INTEGER	read-only	An object containing the sixth usage allocation plan duration (in minutes) that the sixth plan was in effect (if any).
INT g3cbctrunkMinChan	1.3.6.1.4.1.6889.2.8.1.74.6.1.24	INTEGER	read-only	An object containing the minimum number of channels in the ISDN-PRI CBC trunk group allocated to the specified service/feature.
INT g3cbctrunkMaxChan	1.3.6.1.4.1.6889.2.8.1.74.6.1.25	INTEGER	read-only	An object containing the maximum number of channels in the ISDN-PRI CBC trunk group allocated to the specified service/feature.
INT g3cbctrunkMeasHour	1.3.6.1.4.1.6889.2.8.1.74.6.1.26	INTEGER	read-only	An object containing the Hour the measurement was taken.
INT g3cbctrunkTotUsage	1.3.6.1.4.1.6889.2.8.1.74.6.1.27	INTEGER	read-only	An object containing the sum of time (CCS) for all channels used by the specified service/feature.
INT g3cbctrunkTotSeize	1.3.6.1.4.1.6889.2.8.1.74.6.1.28	INTEGER	read-only	An object containing the total number of incoming and outgoing calls that requested the specified service/feature.
INT g3cbctrunkIncSeize	1.3.6.1.4.1.6889.2.8.1.74.6.1.29	INTEGER	read-only	An object containing the total number of incoming calls that requested the specified service/feature.
INT g3cbctrunkTanSeize	1.3.6.1.4.1.6889.2.8.1.74.6.1.30	INTEGER	read-only	An object containing the total number of trunk-to-trunk call seizures using the specified service/feature.
INT g3cbctrunkOvfTG	1.3.6.1.4.1.6889.2.8.1.74.6.1.31	INTEGER	read-only	An object containing the number of outgoing calls that requested the specified service/feature, but were not carried because the calls arrived to find no idle trunk members.
INT g3cbctrunkOvfSF	1.3.6.1.4.1.6889.2.8.1.74.6.1.32	INTEGER	read-only	An object containing the number of calls that requested the specified service/feature but were denied.
INT g3cbctrunkOvfMAX	1.3.6.1.4.1.6889.2.8.1.74.6.1.33	INTEGER	read-only	An object containing the number of calls that were not carried because they originated at a time when the specified service/feature had already used up its allotted maximum number of channels.
INT g3cbctrunkTBM	1.3.6.1.4.1.6889.2.8.1.74.6.1.34	INTEGER	read-only	An object containing the percentage of time during the polling interval that the number of channels in use by the specified service/feature is below the specified minimum.
INT g3cbctrunkATB	1.3.6.1.4.1.6889.2.8.1.74.6.1.35	INTEGER	read-only	An object containing the percentage of time during the measurement interval that the specified service/feature could not get a channel.
INT g3cbctrunkOutBlk	1.3.6.1.4.1.6889.2.8.1.74.6.1.36	INTEGER	read-only	An object containing the ratio of outgoing calls not carried for a specified service/feature to the outgoing calls offered by the service/feature.
g3deftime	1.3.6.1.4.1.6889.2.8.1.75
INT g3deftimeTage	1.3.6.1.4.1.6889.2.8.1.75.1	INTEGER	read-only	The number of timeticks since the definity time data was last extracted from the switch by the Proxy Agent. This object along with the g3deftimeintvl object allows the Network Manager to determine the validity of the definity time data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3deftimeTintvl	1.3.6.1.4.1.6889.2.8.1.75.2	INTEGER	read-write	An object containing the interval for which the definity time data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for definity time objects is received by the agent it uses the g3deftimeage and g3deftimeintvl objects to determine whether it should refresh the cached deftimeTable. If g3deftimestmp + g3deftimeintvl is less than the current value of the sysUpTime object then the agent refreshes the deftimeTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3deftimeTdelay	1.3.6.1.4.1.6889.2.8.1.75.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3deftimeTretrieve	1.3.6.1.4.1.6889.2.8.1.75.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
INT g3deftimeDayOfMonth	1.3.6.1.4.1.6889.2.8.1.75.5	INTEGER	read-only	An INTEGER object containing the current system time Day of the Month (1-31).
STR g3deftimeMonth	1.3.6.1.4.1.6889.2.8.1.75.6	DisplayString	read-only	A DisplayString Object that contains the name of the Month ('January', 'February', 'March', 'April', 'May', 'June', 'July', 'August', 'September', 'October', 'November', or 'December').
INT g3deftimeYear	1.3.6.1.4.1.6889.2.8.1.75.7	INTEGER	read-only	An INTEGER object containing the current system time Year (0000-9999).
STR g3deftimeDayOfWeek	1.3.6.1.4.1.6889.2.8.1.75.8	DisplayString	read-only	A DisplayString Object that contains the day of the week ('Monday', 'Tuesday', 'Wednesday', 'Thursday', 'Friday', 'Saturday', or 'Sunday').
INT g3deftimeHour	1.3.6.1.4.1.6889.2.8.1.75.9	INTEGER	read-only	An INTEGER object containing the current system time Hour (0-23).
INT g3deftimeMinute	1.3.6.1.4.1.6889.2.8.1.75.10	INTEGER	read-only	An INTEGER object containing the current system time Minute (0-59).
INT g3deftimeSecond	1.3.6.1.4.1.6889.2.8.1.75.11	INTEGER	read-only	An INTEGER object containing the current system time Second (0-59).
g3trunkout	1.3.6.1.4.1.6889.2.8.1.76
INT g3trunkoutTage	1.3.6.1.4.1.6889.2.8.1.76.1	INTEGER	read-only	The number of timeticks since the trunk outage data was last extracted from the switch by the Proxy Agent. This object along with the g3trunkoutintvl object allows the Network Manager to determine the validity of the trunk outage data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3trunkoutTintvl	1.3.6.1.4.1.6889.2.8.1.76.2	INTEGER	read-write	An object containing the interval for which the trunk outage data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for trunk outage objects is received by the agent it uses the g3trunkoutage and g3trunkoutintvl objects to determine whether it should refresh the cached trunkoutTable. If g3trunkoutstmp + g3trunkoutintvl is less than the current value of the sysUpTime object then the agent refreshes the trunkoutTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3trunkoutTdelay	1.3.6.1.4.1.6889.2.8.1.76.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3trunkoutTretrieve	1.3.6.1.4.1.6889.2.8.1.76.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3trunkoutTcount	1.3.6.1.4.1.6889.2.8.1.76.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3trunkoutTable	1.3.6.1.4.1.6889.2.8.1.76.6		not-accessible	A list of g3trunkout entries.
g3trunkoutEntry	1.3.6.1.4.1.6889.2.8.1.76.6.1		not-accessible	A g3trunkout entry containing objects of the g3trunkout information sent by the switch.
INT g3trunkoutTrunkGroup	1.3.6.1.4.1.6889.2.8.1.76.6.1.1	INTEGER	read-only	An object containing the trunk group number.
INT g3trunkoutMember	1.3.6.1.4.1.6889.2.8.1.76.6.1.2	INTEGER	read-only	An object containing the group member number.
INT g3trunkoutYear	1.3.6.1.4.1.6889.2.8.1.76.6.1.3	INTEGER	read-only	An object containing the Year the command was executed.
INT g3trunkoutMonth	1.3.6.1.4.1.6889.2.8.1.76.6.1.4	INTEGER	read-only	An object containing the Month the command was executed.
INT g3trunkoutDay	1.3.6.1.4.1.6889.2.8.1.76.6.1.5	INTEGER	read-only	An object containing the Day the command was executed.
INT g3trunkoutHour	1.3.6.1.4.1.6889.2.8.1.76.6.1.6	INTEGER	read-only	An object containing the Hour the command was executed.
INT g3trunkoutOutages	1.3.6.1.4.1.6889.2.8.1.76.6.1.7	INTEGER	read-only	An object containing the number of times the group member is sampled as out of service over the measurement period.
g3trunklight	1.3.6.1.4.1.6889.2.8.1.77
INT g3trunklightTage	1.3.6.1.4.1.6889.2.8.1.77.1	INTEGER	read-only	The number of timeticks since the lightly used trunk data was last extracted from the switch by the Proxy Agent. This object along with the g3trunklightintvl object allows the Network Manager to determine the validity of the lightly used trunk data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3trunklightTintvl	1.3.6.1.4.1.6889.2.8.1.77.2	INTEGER	read-write	An object containing the interval for which the lightly used trunk data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for lightly used trunk objects is received by the agent it uses the g3trunklightage and g3trunklightintvl objects to determine whether it should refresh the cached trunklightTable. If g3trunklightstmp+g3trunklightintvl is less than the current value of the sysUpTime object then the agent refreshes the trunklightTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3trunklightTdelay	1.3.6.1.4.1.6889.2.8.1.77.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3trunklightTretrieve	1.3.6.1.4.1.6889.2.8.1.77.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3trunklightTcount	1.3.6.1.4.1.6889.2.8.1.77.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3trunklightTable	1.3.6.1.4.1.6889.2.8.1.77.6		not-accessible	A list of g3trunklight entries.
g3trunklightEntry	1.3.6.1.4.1.6889.2.8.1.77.6.1		not-accessible	A g3trunklight entry containing objects of the g3trunklight information sent by the switch.
INT g3trunklightTrunkGroup	1.3.6.1.4.1.6889.2.8.1.77.6.1.1	INTEGER	read-only	An object containing the trunk group number.
INT g3trunklightMember	1.3.6.1.4.1.6889.2.8.1.77.6.1.2	INTEGER	read-only	An object containing the group member number.
INT g3trunklightYear	1.3.6.1.4.1.6889.2.8.1.77.6.1.3	INTEGER	read-only	An object containing the Year the command was executed.
INT g3trunklightMonth	1.3.6.1.4.1.6889.2.8.1.77.6.1.4	INTEGER	read-only	An object containing the Month the command was executed.
INT g3trunklightDay	1.3.6.1.4.1.6889.2.8.1.77.6.1.5	INTEGER	read-only	An object containing the Day the command was executed.
INT g3trunklightHour	1.3.6.1.4.1.6889.2.8.1.77.6.1.6	INTEGER	read-only	An object containing the Hour the command was executed.
INT g3trunklightCarried	1.3.6.1.4.1.6889.2.8.1.77.6.1.7	INTEGER	read-only	An object containing the number of calls carried on the trunk member over the measurement interval.
g3loadtotal	1.3.6.1.4.1.6889.2.8.1.78
INT g3loadtotalTage	1.3.6.1.4.1.6889.2.8.1.78.1	INTEGER	read-only	The number of timeticks since the data was last extracted from the switch by the Proxy Agent. This object along with the g3loadtotalintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3loadtotalTintvl	1.3.6.1.4.1.6889.2.8.1.78.2	INTEGER	read-write	An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these objects is received by the agent it uses the g3loadtotalage and g3loadtotalintvl objects to determine whether it should refresh the cached loadtotalTable. If g3loadtotalstmp + g3loadtotalintvl is less than the current value of the sysUpTime object then the agent refreshes the loadtotalTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3loadtotalTdelay	1.3.6.1.4.1.6889.2.8.1.78.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3loadtotalTretrieve	1.3.6.1.4.1.6889.2.8.1.78.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3loadtotalTcount	1.3.6.1.4.1.6889.2.8.1.78.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3loadtotalTable	1.3.6.1.4.1.6889.2.8.1.78.6		not-accessible	A list of g3loadtotal entries.
g3loadtotalEntry	1.3.6.1.4.1.6889.2.8.1.78.6.1		not-accessible	A g3loadtotal entry containing objects of the g3loadtotal information sent by the switch.
INT g3loadtotalPNNumber	1.3.6.1.4.1.6889.2.8.1.78.6.1.1	INTEGER	read-only	An object containing the Port Network number.
INT g3loadtotalYear	1.3.6.1.4.1.6889.2.8.1.78.6.1.2	INTEGER	read-only	An object containing the Year the command was executed.
INT g3loadtotalMonth	1.3.6.1.4.1.6889.2.8.1.78.6.1.3	INTEGER	read-only	An object containing the Month the command was executed.
INT g3loadtotalDay	1.3.6.1.4.1.6889.2.8.1.78.6.1.4	INTEGER	read-only	An object containing the Day the command was executed.
INT g3loadtotalHour	1.3.6.1.4.1.6889.2.8.1.78.6.1.5	INTEGER	read-only	An object containing the Hour the command was executed.
INT g3loadtotalPNOccupancy	1.3.6.1.4.1.6889.2.8.1.78.6.1.6	INTEGER	read-only	An object containing the percentage of port network link occupancy.
INT g3loadtotalPNUtil	1.3.6.1.4.1.6889.2.8.1.78.6.1.7	INTEGER	read-only	An object containing the percentage of the total capacity of the processor on the measured EI board.
INT g3loadtotalTDMOccupancy	1.3.6.1.4.1.6889.2.8.1.78.6.1.8	INTEGER	read-only	An object containing the percentage of time division muliplexed occupancy.
g3loadint	1.3.6.1.4.1.6889.2.8.1.79
INT g3loadintTage	1.3.6.1.4.1.6889.2.8.1.79.1	INTEGER	read-only	The number of timeticks since the data was last extracted from the switch by the Proxy Agent. This object along with the g3loadintintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3loadintTintvl	1.3.6.1.4.1.6889.2.8.1.79.2	INTEGER	read-write	An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these objects is received by the agent it uses the g3loadintage and g3loadintintvl objects to determine whether it should refresh the cached loadintTable. If g3loadintstmp + g3loadintintvl is less than the current value of the sysUpTime object then the agent refreshes the loadintTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3loadintTdelay	1.3.6.1.4.1.6889.2.8.1.79.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3loadintTretrieve	1.3.6.1.4.1.6889.2.8.1.79.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3loadintTcount	1.3.6.1.4.1.6889.2.8.1.79.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3loadintTable	1.3.6.1.4.1.6889.2.8.1.79.6		not-accessible	A list of g3loadint entries.
g3loadintEntry	1.3.6.1.4.1.6889.2.8.1.79.6.1		not-accessible	A g3loadint entry containing objects of the g3loadint information sent by the switch.
INT g3loadintPNNumber	1.3.6.1.4.1.6889.2.8.1.79.6.1.1	INTEGER	read-only	An object containing the Port Network number.
INT g3loadintYear	1.3.6.1.4.1.6889.2.8.1.79.6.1.2	INTEGER	read-only	An object containing the Year the command was executed.
INT g3loadintMonth	1.3.6.1.4.1.6889.2.8.1.79.6.1.3	INTEGER	read-only	An object containing the Month the command was executed.
INT g3loadintDay	1.3.6.1.4.1.6889.2.8.1.79.6.1.4	INTEGER	read-only	An object containing the Day the command was executed.
INT g3loadintHour	1.3.6.1.4.1.6889.2.8.1.79.6.1.5	INTEGER	read-only	An object containing the Hour the command was executed.
INT g3loadintIntIntraPNUse	1.3.6.1.4.1.6889.2.8.1.79.6.1.6	INTEGER	read-only	An object containing the TDM time-slot usage caused by station-to-station calls between terminals on the same port network (displayed in CCS).
INT g3loadintIntIntraPNPeg	1.3.6.1.4.1.6889.2.8.1.79.6.1.7	INTEGER	read-only	An object containing the count of TDM time-slot seizures caused by station-to-station calls between terminals on the same PN.
INT g3loadintIntInterPNUse	1.3.6.1.4.1.6889.2.8.1.79.6.1.8	INTEGER	read-only	An object containing the TDM time-slot usage caused by station-to-station calls between terminals on different port networks (in CCS).
INT g3loadintIntInterPNPeg	1.3.6.1.4.1.6889.2.8.1.79.6.1.9	INTEGER	read-only	An object containing the TDM time slot seizures caused by station-to-station calls between terminals on different PNs.
g3loadinc	1.3.6.1.4.1.6889.2.8.1.80
INT g3loadincTage	1.3.6.1.4.1.6889.2.8.1.80.1	INTEGER	read-only	The number of timeticks since the data was last extracted from the switch by the Proxy Agent. This object along with the g3loadincintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3loadincTintvl	1.3.6.1.4.1.6889.2.8.1.80.2	INTEGER	read-write	An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these objects is received by the agent it uses the g3loadincage and g3loadincintvl objects to determine whether it should refresh the cached loadincTable. If g3loadincstmp + g3loadincintvl is less than the current value of the sysUpTime object then the agent refreshes the loadincTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3loadincTdelay	1.3.6.1.4.1.6889.2.8.1.80.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3loadincTretrieve	1.3.6.1.4.1.6889.2.8.1.80.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3loadincTcount	1.3.6.1.4.1.6889.2.8.1.80.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3loadincTable	1.3.6.1.4.1.6889.2.8.1.80.6		not-accessible	A list of g3loadinc entries.
g3loadincEntry	1.3.6.1.4.1.6889.2.8.1.80.6.1		not-accessible	A g3loadinc entry containing objects of the g3loadinc information sent by the switch.
INT g3loadincPNNumber	1.3.6.1.4.1.6889.2.8.1.80.6.1.1	INTEGER	read-only	An object containing the Port Network number.
INT g3loadincYear	1.3.6.1.4.1.6889.2.8.1.80.6.1.2	INTEGER	read-only	An object containing the Year the command was executed.
INT g3loadincMonth	1.3.6.1.4.1.6889.2.8.1.80.6.1.3	INTEGER	read-only	An object containing the Month the command was executed.
INT g3loadincDay	1.3.6.1.4.1.6889.2.8.1.80.6.1.4	INTEGER	read-only	An object containing the Day the command was executed.
INT g3loadincHour	1.3.6.1.4.1.6889.2.8.1.80.6.1.5	INTEGER	read-only	An object containing the Hour the command was executed.
INT g3loadincIncIntraPNUse	1.3.6.1.4.1.6889.2.8.1.80.6.1.6	INTEGER	read-only	An object containing the TDM time-slot usage caused by incoming trunk calls to a station on the same port network (in CCS).
INT g3loadincIncIntraPNPeg	1.3.6.1.4.1.6889.2.8.1.80.6.1.7	INTEGER	read-only	An object containing the count of TDM time-slot seizures caused by incoming trunk calls to a station on the same port network.
INT g3loadincIncIncomingUse	1.3.6.1.4.1.6889.2.8.1.80.6.1.8	INTEGER	read-only	An object containing the TDM time-slot usage caused by calls to a station on the port network from an incoming trunk on another port network (in CCS).
INT g3loadincIncIncomingPeg	1.3.6.1.4.1.6889.2.8.1.80.6.1.9	INTEGER	read-only	An object containing the count of TDM time-slot seizures caused by calls to a station on the port network from an incoming trunk on another port network.
INT g3loadincIncOutgoingUse	1.3.6.1.4.1.6889.2.8.1.80.6.1.10	INTEGER	read-only	An object containing the TDM time-slot usage caused by calls to a station on another port network from an incoming trunk on the measured port network (in CCS).
INT g3loadincIncOutgoingPeg	1.3.6.1.4.1.6889.2.8.1.80.6.1.11	INTEGER	read-only	An object containing the count of TDM time-slot seizures caused by calls to a station on another port network from an incoming trunk on the measured port network.
g3loadout	1.3.6.1.4.1.6889.2.8.1.81
INT g3loadoutTage	1.3.6.1.4.1.6889.2.8.1.81.1	INTEGER	read-only	The number of timeticks since the data was last extracted from the switch by the Proxy Agent. This object along with the g3loadoutintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3loadoutTintvl	1.3.6.1.4.1.6889.2.8.1.81.2	INTEGER	read-write	An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these objects is received by the agent it uses the g3loadoutage and g3loadoutintvl objects to determine whether it should refresh the cached loadoutTable. If g3loadoutstmp + g3loadoutintvl is less than the current value of the sysUpTime object then the agent refreshes the loadoutTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3loadoutTdelay	1.3.6.1.4.1.6889.2.8.1.81.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3loadoutTretrieve	1.3.6.1.4.1.6889.2.8.1.81.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3loadoutTcount	1.3.6.1.4.1.6889.2.8.1.81.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3loadoutTable	1.3.6.1.4.1.6889.2.8.1.81.6		not-accessible	A list of g3loadout entries.
g3loadoutEntry	1.3.6.1.4.1.6889.2.8.1.81.6.1		not-accessible	A g3loadout entry containing objects of the g3loadout information sent by the switch.
INT g3loadoutPNNumber	1.3.6.1.4.1.6889.2.8.1.81.6.1.1	INTEGER	read-only	An object containing the Port Network number.
INT g3loadoutYear	1.3.6.1.4.1.6889.2.8.1.81.6.1.2	INTEGER	read-only	An object containing the Year the command was executed.
INT g3loadoutMonth	1.3.6.1.4.1.6889.2.8.1.81.6.1.3	INTEGER	read-only	An object containing the Month the command was executed.
INT g3loadoutDay	1.3.6.1.4.1.6889.2.8.1.81.6.1.4	INTEGER	read-only	An object containing the Day the command was executed.
INT g3loadoutHour	1.3.6.1.4.1.6889.2.8.1.81.6.1.5	INTEGER	read-only	An object containing the Hour the command was executed.
INT g3loadoutOutIntraPNUse	1.3.6.1.4.1.6889.2.8.1.81.6.1.6	INTEGER	read-only	An object containing the TDM time-slot usage caused by outgoing calls made by stations on the measured port network and serviced by outgoing trunks on the same port network (in CCS).
INT g3loadoutOutIntraPNPeg	1.3.6.1.4.1.6889.2.8.1.81.6.1.7	INTEGER	read-only	An object containing the count of TDM time-slot seizures caused by outgoing calls made by stations on the measured port network and serviced by outgoing trunks on the same port network.
INT g3loadoutOutIncomingUse	1.3.6.1.4.1.6889.2.8.1.81.6.1.8	INTEGER	read-only	An object containing the TDM time-slot usage resulting from outgoing calls originated at stations on another port network but serviced by trunks on the port network being measured (in CCS).
INT g3loadoutOutIncomingPeg	1.3.6.1.4.1.6889.2.8.1.81.6.1.9	INTEGER	read-only	An object containing the count of TDM time-slot seizures resulting from outgoing calls originated at stations on another port network, but serviced by trunks on the port network being measured.
INT g3loadoutOutOutgoingUse	1.3.6.1.4.1.6889.2.8.1.81.6.1.10	INTEGER	read-only	An object containing the TDM time-slot usage resulting from outgoing calls originated at stations on the port network being measured, but serviced by trunks on another port network (in CCS).
INT g3loadoutOutOutgoingPeg	1.3.6.1.4.1.6889.2.8.1.81.6.1.11	INTEGER	read-only	An object containing the count of TDM time-slot seizures resulting from outgoing calls originated at stations on the port network being measured, but serviced by trunks on another port network.
g3loadtan	1.3.6.1.4.1.6889.2.8.1.82
INT g3loadtanTage	1.3.6.1.4.1.6889.2.8.1.82.1	INTEGER	read-only	The number of timeticks since the tandem load data was last extracted from the switch by the Proxy Agent. This object along with the g3loadtanintvl object allows the Network Manager to determine the validity of the tandem load data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3loadtanTintvl	1.3.6.1.4.1.6889.2.8.1.82.2	INTEGER	read-write	An object containing the interval for which the tandem load data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the tandem load objects is received by the agent it uses the g3loadtanage and g3loadtanintvl objects to determine whether it should refresh the cached loadtanTable. If g3loadtanstmp + g3loadtanintvl is less than the current value of the sysUpTime object then the agent refreshes the loadtanTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3loadtanTdelay	1.3.6.1.4.1.6889.2.8.1.82.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3loadtanTretrieve	1.3.6.1.4.1.6889.2.8.1.82.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3loadtanTcount	1.3.6.1.4.1.6889.2.8.1.82.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3loadtanTable	1.3.6.1.4.1.6889.2.8.1.82.6		not-accessible	A list of g3loadtan entries.
g3loadtanEntry	1.3.6.1.4.1.6889.2.8.1.82.6.1		not-accessible	A g3loadtan entry containing objects of the g3loadtan information sent by the switch.
INT g3loadtanPNNumber	1.3.6.1.4.1.6889.2.8.1.82.6.1.1	INTEGER	read-only	An object containing the Port Network number.
INT g3loadtanYear	1.3.6.1.4.1.6889.2.8.1.82.6.1.2	INTEGER	read-only	An object containing the Year the command was executed.
INT g3loadtanMonth	1.3.6.1.4.1.6889.2.8.1.82.6.1.3	INTEGER	read-only	An object containing the Month the command was executed.
INT g3loadtanDay	1.3.6.1.4.1.6889.2.8.1.82.6.1.4	INTEGER	read-only	An object containing the Day the command was executed.
INT g3loadtanHour	1.3.6.1.4.1.6889.2.8.1.82.6.1.5	INTEGER	read-only	An object containing the Hour the command was executed.
INT g3loadtanTanIntraPNUse	1.3.6.1.4.1.6889.2.8.1.82.6.1.6	INTEGER	read-only	An object containing the TDM usage caused by tandem trunk calls originating and terminating on the port network being measured (in CCS).
INT g3loadtanTanIntraPNPeg	1.3.6.1.4.1.6889.2.8.1.82.6.1.7	INTEGER	read-only	An object containing the count of TDM time-slot seizures caused by tandem trunk calls originating and terminating on the port network being measured.
INT g3loadtanTanIncomingUse	1.3.6.1.4.1.6889.2.8.1.82.6.1.8	INTEGER	read-only	An object containing the TDM usage resulting from tandem trunk calls originating on another port network, but terminating on the port network being measured (in CCS).
INT g3loadtanTanIncomingPeg	1.3.6.1.4.1.6889.2.8.1.82.6.1.9	INTEGER	read-only	An object containing the count of TDM time-slot seizures resulting from tandem trunk calls originating on another port network, but terminating on the port network being measured. that is, the number of times a PN link time-slot is denied.
INT g3loadtanTanOutgoingUse	1.3.6.1.4.1.6889.2.8.1.82.6.1.10	INTEGER	read-only	An object containing the TDM usage resulting from tandem trunk calls originating on the port network being measured, but terminating on another port network (in CCS).
INT g3loadtanTanOutgoingPeg	1.3.6.1.4.1.6889.2.8.1.82.6.1.11	INTEGER	read-only	An object containing the count of TDM time-slot seizures resulting from tandem trunk calls originating on the port network being measured, but terminating on another port network.
g3pkloadtotal	1.3.6.1.4.1.6889.2.8.1.83
INT g3pkloadtotalTage	1.3.6.1.4.1.6889.2.8.1.83.1	INTEGER	read-only	The number of timeticks since the data was last extracted from the switch by the Proxy Agent. This object along with the g3pkloadtotalintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3pkloadtotalTintvl	1.3.6.1.4.1.6889.2.8.1.83.2	INTEGER	read-write	An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these objects is received by the agent it uses the g3pkloadtotalage and g3pkloadtotalintvl objects to determine whether it should refresh the cached pkloadtotalTable. If g3pkloadtotalstmp + g3pkloadtotalintvl is less than the current value of the sysUpTime object then the agent refreshes the pkloadtotalTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3pkloadtotalTdelay	1.3.6.1.4.1.6889.2.8.1.83.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3pkloadtotalTretrieve	1.3.6.1.4.1.6889.2.8.1.83.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3pkloadtotalTcount	1.3.6.1.4.1.6889.2.8.1.83.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3pkloadtotalTable	1.3.6.1.4.1.6889.2.8.1.83.6		not-accessible	A list of g3pkloadtotal entries.
g3pkloadtotalEntry	1.3.6.1.4.1.6889.2.8.1.83.6.1		not-accessible	A g3pkloadtotal entry containing objects of the g3pkloadtotal information sent by the switch.
INT g3pkloadtotalPNNumber	1.3.6.1.4.1.6889.2.8.1.83.6.1.1	INTEGER	read-only	An object containing the Port Network number.
INT g3pkloadtotalYear	1.3.6.1.4.1.6889.2.8.1.83.6.1.2	INTEGER	read-only	An object containing the Year the command was executed.
INT g3pkloadtotalMonth	1.3.6.1.4.1.6889.2.8.1.83.6.1.3	INTEGER	read-only	An object containing the Month the command was executed.
INT g3pkloadtotalDay	1.3.6.1.4.1.6889.2.8.1.83.6.1.4	INTEGER	read-only	An object containing the Day the command was executed.
INT g3pkloadtotalHour	1.3.6.1.4.1.6889.2.8.1.83.6.1.5	INTEGER	read-only	An object containing the Hour the command was executed.
INT g3pkloadtotalPNOccupancy	1.3.6.1.4.1.6889.2.8.1.83.6.1.6	INTEGER	read-only	An object containing the percentage of port network link occupancy.
INT g3pkloadtotalPNUtil	1.3.6.1.4.1.6889.2.8.1.83.6.1.7	INTEGER	read-only	An object containing the percentage of the total capacity of the processor on the measured EI board (this field no longer is no longer populated).
INT g3pkloadtotalTDMOccupancy	1.3.6.1.4.1.6889.2.8.1.83.6.1.8	INTEGER	read-only	An object containing the percentage of time division muliplexed occupancy.
g3pkloadint	1.3.6.1.4.1.6889.2.8.1.84
INT g3pkloadintTage	1.3.6.1.4.1.6889.2.8.1.84.1	INTEGER	read-only	The number of timeticks since the data was last extracted from the switch by the Proxy Agent. This object along with the g3pkloadintintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3pkloadintTintvl	1.3.6.1.4.1.6889.2.8.1.84.2	INTEGER	read-write	An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these objects is received by the agent it uses the g3pkloadintage and g3pkloadintintvl objects to determine whether it should refresh the cached pkloadintTable. If g3pkloadintstmp + g3pkloadintintvl is less than the current value of the sysUpTime object then the agent refreshes the pkloadintTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3pkloadintTdelay	1.3.6.1.4.1.6889.2.8.1.84.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3pkloadintTretrieve	1.3.6.1.4.1.6889.2.8.1.84.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3pkloadintTcount	1.3.6.1.4.1.6889.2.8.1.84.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3pkloadintTable	1.3.6.1.4.1.6889.2.8.1.84.6		not-accessible	A list of g3pkloadint entries.
g3pkloadintEntry	1.3.6.1.4.1.6889.2.8.1.84.6.1		not-accessible	A g3pkloadint entry containing objects of the g3pkloadint information sent by the switch.
INT g3pkloadintPNNumber	1.3.6.1.4.1.6889.2.8.1.84.6.1.1	INTEGER	read-only	An object containing the Port Network number.
INT g3pkloadintYear	1.3.6.1.4.1.6889.2.8.1.84.6.1.2	INTEGER	read-only	An object containing the Year the command was executed.
INT g3pkloadintMonth	1.3.6.1.4.1.6889.2.8.1.84.6.1.3	INTEGER	read-only	An object containing the Month the command was executed.
INT g3pkloadintDay	1.3.6.1.4.1.6889.2.8.1.84.6.1.4	INTEGER	read-only	An object containing the Day the command was executed.
INT g3pkloadintHour	1.3.6.1.4.1.6889.2.8.1.84.6.1.5	INTEGER	read-only	An object containing the Hour the command was executed.
INT g3pkloadintIntIntraPNUse	1.3.6.1.4.1.6889.2.8.1.84.6.1.6	INTEGER	read-only	An object containing the TDM time-slot usage caused by station-to-station calls between terminals on the same port network (displayed in CCS).
INT g3pkloadintIntIntraPNPeg	1.3.6.1.4.1.6889.2.8.1.84.6.1.7	INTEGER	read-only	An object containing the count of TDM time-slot seizures caused by station-to-station calls between terminals on the same PN.
INT g3pkloadintIntInterPNUse	1.3.6.1.4.1.6889.2.8.1.84.6.1.8	INTEGER	read-only	An object containing the TDM time-slot usage caused by station-to-station calls between terminals on different port networks (in CCS).
INT g3pkloadintIntInterPNPeg	1.3.6.1.4.1.6889.2.8.1.84.6.1.9	INTEGER	read-only	An object containing the TDM time slot seizures caused by station-to-station calls between terminals on different PNs.
g3pkloadinc	1.3.6.1.4.1.6889.2.8.1.85
INT g3pkloadincTage	1.3.6.1.4.1.6889.2.8.1.85.1	INTEGER	read-only	The number of timeticks since the data was last extracted from the switch by the Proxy Agent. This object along with the g3pkloadincintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3pkloadincTintvl	1.3.6.1.4.1.6889.2.8.1.85.2	INTEGER	read-write	An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these objects is received by the agent it uses the g3pkloadincage and g3pkloadincintvl objects to determine whether it should refresh the cached pkloadincTable. If g3pkloadincstmp + g3pkloadincintvl is less than the current value of the sysUpTime object then the agent refreshes the pkloadincTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3pkloadincTdelay	1.3.6.1.4.1.6889.2.8.1.85.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3pkloadincTretrieve	1.3.6.1.4.1.6889.2.8.1.85.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3pkloadincTcount	1.3.6.1.4.1.6889.2.8.1.85.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3pkloadincTable	1.3.6.1.4.1.6889.2.8.1.85.6		not-accessible	A list of g3pkloadinc entries.
g3pkloadincEntry	1.3.6.1.4.1.6889.2.8.1.85.6.1		not-accessible	A g3pkloadinc entry containing objects of the g3pkloadinc information sent by the switch.
INT g3pkloadincPNNumber	1.3.6.1.4.1.6889.2.8.1.85.6.1.1	INTEGER	read-only	An object containing the Port Network number.
INT g3pkloadincYear	1.3.6.1.4.1.6889.2.8.1.85.6.1.2	INTEGER	read-only	An object containing the Year the command was executed.
INT g3pkloadincMonth	1.3.6.1.4.1.6889.2.8.1.85.6.1.3	INTEGER	read-only	An object containing the Month the command was executed.
INT g3pkloadincDay	1.3.6.1.4.1.6889.2.8.1.85.6.1.4	INTEGER	read-only	An object containing the Day the command was executed.
INT g3pkloadincHour	1.3.6.1.4.1.6889.2.8.1.85.6.1.5	INTEGER	read-only	An object containing the Hour the command was executed.
INT g3pkloadincIncIntraPNUse	1.3.6.1.4.1.6889.2.8.1.85.6.1.6	INTEGER	read-only	An object containing the TDM time-slot usage caused by incoming trunk calls to a station on the same port network (in CCS).
INT g3pkloadincIncIntraPNPeg	1.3.6.1.4.1.6889.2.8.1.85.6.1.7	INTEGER	read-only	An object containing the count of TDM time-slot seizures caused by incoming trunk calls to a station on the same port network.
INT g3pkloadincIncIncomingUse	1.3.6.1.4.1.6889.2.8.1.85.6.1.8	INTEGER	read-only	An object containing the TDM time-slot usage caused by calls to a station on the port network from an incoming trunk on another port network (in CCS).
INT g3pkloadincIncIncomingPeg	1.3.6.1.4.1.6889.2.8.1.85.6.1.9	INTEGER	read-only	An object containing the count of TDM time-slot seizures caused by calls to a station on the port network from an incoming trunk on another port network.
INT g3pkloadincIncOutgoingUse	1.3.6.1.4.1.6889.2.8.1.85.6.1.10	INTEGER	read-only	An object containing the TDM time-slot usage caused by calls to a station on another port network from an incoming trunk on the measured port network (in CCS).
INT g3pkloadincIncOutgoingPeg	1.3.6.1.4.1.6889.2.8.1.85.6.1.11	INTEGER	read-only	An object containing the count of TDM time-slot seizures caused by calls to a station on another port network from an incoming trunk on the measured port network.
g3pkloadout	1.3.6.1.4.1.6889.2.8.1.86
INT g3pkloadoutTage	1.3.6.1.4.1.6889.2.8.1.86.1	INTEGER	read-only	The number of timeticks since the data was last extracted from the switch by the Proxy Agent. This object along with the g3pkloadoutintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3pkloadoutTintvl	1.3.6.1.4.1.6889.2.8.1.86.2	INTEGER	read-write	An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these objects is received by the agent it uses the g3pkloadoutage and g3pkloadoutintvl objects to determine whether it should refresh the cached pkloadoutTable. If g3pkloadoutstmp + g3pkloadoutintvl is less than the current value of the sysUpTime object then the agent refreshes the pkloadoutTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3pkloadoutTdelay	1.3.6.1.4.1.6889.2.8.1.86.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3pkloadoutTretrieve	1.3.6.1.4.1.6889.2.8.1.86.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3pkloadoutTcount	1.3.6.1.4.1.6889.2.8.1.86.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3pkloadoutTable	1.3.6.1.4.1.6889.2.8.1.86.6		not-accessible	A list of g3pkloadout entries.
g3pkloadoutEntry	1.3.6.1.4.1.6889.2.8.1.86.6.1		not-accessible	A g3pkloadout entry containing objects of the g3pkloadout information sent by the switch.
INT g3pkloadoutPNNumber	1.3.6.1.4.1.6889.2.8.1.86.6.1.1	INTEGER	read-only	An object containing the Port Network number.
INT g3pkloadoutYear	1.3.6.1.4.1.6889.2.8.1.86.6.1.2	INTEGER	read-only	An object containing the Year the command was executed.
INT g3pkloadoutMonth	1.3.6.1.4.1.6889.2.8.1.86.6.1.3	INTEGER	read-only	An object containing the Month the command was executed.
INT g3pkloadoutDay	1.3.6.1.4.1.6889.2.8.1.86.6.1.4	INTEGER	read-only	An object containing the Day the command was executed.
INT g3pkloadoutHour	1.3.6.1.4.1.6889.2.8.1.86.6.1.5	INTEGER	read-only	An object containing the Hour the command was executed.
INT g3pkloadoutOutIntraPNUse	1.3.6.1.4.1.6889.2.8.1.86.6.1.6	INTEGER	read-only	An object containing the TDM time-slot usage caused by outgoing calls made by stations on the measured port network and serviced by outgoing trunks on the same port network (in CCS).
INT g3pkloadoutOutIntraPNPeg	1.3.6.1.4.1.6889.2.8.1.86.6.1.7	INTEGER	read-only	An object containing the count of TDM time-slot seizures caused by outgoing calls made by stations on the measured port network and serviced by outgoing trunks on the same port network.
INT g3pkloadoutOutIncomingUse	1.3.6.1.4.1.6889.2.8.1.86.6.1.8	INTEGER	read-only	An object containing the TDM time-slot usage resulting from outgoing calls originated at stations on another port network but serviced by trunks on the port network being measured (in CCS).
INT g3pkloadoutOutIncomingPeg	1.3.6.1.4.1.6889.2.8.1.86.6.1.9	INTEGER	read-only	An object containing the count of TDM time-slot seizures resulting from outgoing calls originated at stations on another port network, but serviced by trunks on the port network being measured.
INT g3pkloadoutOutOutgoingUse	1.3.6.1.4.1.6889.2.8.1.86.6.1.10	INTEGER	read-only	An object containing the TDM time-slot usage resulting from outgoing calls originated at stations on the port network being measured, but serviced by trunks on another port network (in CCS).
INT g3pkloadoutOutOutgoingPeg	1.3.6.1.4.1.6889.2.8.1.86.6.1.11	INTEGER	read-only	An object containing the count of TDM time-slot seizures resulting from outgoing calls originated at stations on the port network being measured, but serviced by trunks on another port network.
g3pkloadtan	1.3.6.1.4.1.6889.2.8.1.87
INT g3pkloadtanTage	1.3.6.1.4.1.6889.2.8.1.87.1	INTEGER	read-only	The number of timeticks since the peak tandem load data was last extracted from the switch by the Proxy Agent. This object along with the g3pkloadtanintvl object allows the Network Manager to determine the validity of the peak tandem load data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3pkloadtanTintvl	1.3.6.1.4.1.6889.2.8.1.87.2	INTEGER	read-write	An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the peak tandem load objects is received by the agent it uses the g3pkloadtanage and g3pkloadtanintvl objects to determine whether it should refresh the cached pkloadtanTable. If g3pkloadtanstmp + g3pkloadtanintvl is less than the current value of the sysUpTime object then the agent refreshes the pkloadtanTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3pkloadtanTdelay	1.3.6.1.4.1.6889.2.8.1.87.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3pkloadtanTretrieve	1.3.6.1.4.1.6889.2.8.1.87.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3pkloadtanTcount	1.3.6.1.4.1.6889.2.8.1.87.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3pkloadtanTable	1.3.6.1.4.1.6889.2.8.1.87.6		not-accessible	A list of g3pkloadtan entries.
g3pkloadtanEntry	1.3.6.1.4.1.6889.2.8.1.87.6.1		not-accessible	A g3pkloadtan entry containing objects of the g3pkloadtan information sent by the switch.
INT g3pkloadtanPNNumber	1.3.6.1.4.1.6889.2.8.1.87.6.1.1	INTEGER	read-only	An object containing the Port Network number.
INT g3pkloadtanYear	1.3.6.1.4.1.6889.2.8.1.87.6.1.2	INTEGER	read-only	An object containing the Year the command was executed.
INT g3pkloadtanMonth	1.3.6.1.4.1.6889.2.8.1.87.6.1.3	INTEGER	read-only	An object containing the Month the command was executed.
INT g3pkloadtanDay	1.3.6.1.4.1.6889.2.8.1.87.6.1.4	INTEGER	read-only	An object containing the Day the command was executed.
INT g3pkloadtanHour	1.3.6.1.4.1.6889.2.8.1.87.6.1.5	INTEGER	read-only	An object containing the Hour the command was executed.
INT g3pkloadtanTanIntraPNUse	1.3.6.1.4.1.6889.2.8.1.87.6.1.6	INTEGER	read-only	An object containing the TDM usage caused by tandem trunk calls originating and terminating on the port network being measured (in CCS).
INT g3pkloadtanTanIntraPNPeg	1.3.6.1.4.1.6889.2.8.1.87.6.1.7	INTEGER	read-only	An object containing the count of TDM time-slot seizures caused by tandem trunk calls originating and terminating on the port network being measured.
INT g3pkloadtanTanIncomingUse	1.3.6.1.4.1.6889.2.8.1.87.6.1.8	INTEGER	read-only	An object containing the TDM usage resulting from tandem trunk calls originating on another port network, but terminating on the port network being measured (in CCS).
INT g3pkloadtanTanIncomingPeg	1.3.6.1.4.1.6889.2.8.1.87.6.1.9	INTEGER	read-only	An object containing the count of TDM time-slot seizures resulting from tandem trunk calls originating on another port network, but terminating on the port network being measured.
INT g3pkloadtanTanOutgoingUse	1.3.6.1.4.1.6889.2.8.1.87.6.1.10	INTEGER	read-only	An object containing the TDM usage resulting from tandem trunk calls originating on the port network being measured, but terminating on another port network (in CCS).
INT g3pkloadtanTanOutgoingPeg	1.3.6.1.4.1.6889.2.8.1.87.6.1.11	INTEGER	read-only	An object containing the count of TDM time-slot seizures resulting from tandem trunk calls originating on the port network being measured, but terminating on another port network.
g3atmlatency	1.3.6.1.4.1.6889.2.8.1.88
INT g3atmlatencyTage	1.3.6.1.4.1.6889.2.8.1.88.1	INTEGER	read-only	The number of timeticks since the atm pnc latency data was last extracted from the switch by the Proxy Agent. This object along with the g3atmlatencyintvl object allows the Network Manager to determine the validity of the atm pnc latency data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3atmlatencyTintvl	1.3.6.1.4.1.6889.2.8.1.88.2	INTEGER	read-write	An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the atm pnc latency objects is received by the agent it uses the g3atmlatencyage and g3atmlatencyintvl objects to determine whether it should refresh the cached atmlatencyTable. If g3atmlatencystmp + g3atmlatencyintvl is less than the current value of the sysUpTime object then the agent refreshes the atmlatencyTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3atmlatencyTdelay	1.3.6.1.4.1.6889.2.8.1.88.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3atmlatencyTretrieve	1.3.6.1.4.1.6889.2.8.1.88.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3atmlatencyTcount	1.3.6.1.4.1.6889.2.8.1.88.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3atmlatencyTable	1.3.6.1.4.1.6889.2.8.1.88.6		not-accessible	A list of g3atmlatency entries.
g3atmlatencyEntry	1.3.6.1.4.1.6889.2.8.1.88.6.1		not-accessible	A g3atmlatency entry containing objects of the g3atmlatency information sent by the switch.
INT g3atmlatencyPNPair	1.3.6.1.4.1.6889.2.8.1.88.6.1.1	INTEGER	read-only	An INTEGER object containing an index numbering the PN Pair.
INT g3atmlatencyYear	1.3.6.1.4.1.6889.2.8.1.88.6.1.2	INTEGER	read-only	An object containing the Year the command was executed.
INT g3atmlatencyMonth	1.3.6.1.4.1.6889.2.8.1.88.6.1.3	INTEGER	read-only	An object containing the Month the command was executed.
INT g3atmlatencyDay	1.3.6.1.4.1.6889.2.8.1.88.6.1.4	INTEGER	read-only	An object containing the Day the command was executed.
INT g3atmlatencyHour	1.3.6.1.4.1.6889.2.8.1.88.6.1.5	INTEGER	read-only	An object containing the Hour the command was executed.
INT g3atmlatencyPNOrig1	1.3.6.1.4.1.6889.2.8.1.88.6.1.6	INTEGER	read-only	Originating Port Network for the PN Pair.
INT g3atmlatencyPNDest1	1.3.6.1.4.1.6889.2.8.1.88.6.1.7	INTEGER	read-only	Originating Port Network for the PN Pair.
INT g3atmlatencyCount1A	1.3.6.1.4.1.6889.2.8.1.88.6.1.8	INTEGER	read-only	An object containing the number (count) of connections for the PN Pair on A-PNC.
INT g3atmlatencySetup1A	1.3.6.1.4.1.6889.2.8.1.88.6.1.9	INTEGER	read-only	An object containing the average PN connection setup time (latency) in milliseconds for the PN Pair on A-PNC.
INT g3atmlatencyATMCount1A	1.3.6.1.4.1.6889.2.8.1.88.6.1.10	INTEGER	read-only	An object containing the number (count) of ATM network connections for the PN Pair on A-PNC.
INT g3atmlatencyATMSetup1A	1.3.6.1.4.1.6889.2.8.1.88.6.1.11	INTEGER	read-only	An object containing the average ATM network connection setup time (latency) in milliseconds for the PN Pair on A-PNC.
INT g3atmlatencyMeasHour1A	1.3.6.1.4.1.6889.2.8.1.88.6.1.12	INTEGER	read-only	An object containing the Hour the PN Pair A-PNC measurement was taken.
INT g3atmlatencyCount1B	1.3.6.1.4.1.6889.2.8.1.88.6.1.13	INTEGER	read-only	An object containing the number (count) of connections for the PN Pair on B-PNC.
INT g3atmlatencySetup1B	1.3.6.1.4.1.6889.2.8.1.88.6.1.14	INTEGER	read-only	An object containing the average PN connection setup time (latency) in milliseconds for the PN Pair on B-PNC.
INT g3atmlatencyATMCount1B	1.3.6.1.4.1.6889.2.8.1.88.6.1.15	INTEGER	read-only	An object containing the number (count) of ATM network connections for the PN Pair on B-PNC.
INT g3atmlatencyATMSetup1B	1.3.6.1.4.1.6889.2.8.1.88.6.1.16	INTEGER	read-only	An object containing the average ATM network connection setup time (latency) in milliseconds for the PN Pair on B-PNC.
INT g3atmlatencyMeasHour1B	1.3.6.1.4.1.6889.2.8.1.88.6.1.17	INTEGER	read-only	An object containing the Hour the PN Pair B-PNC measurement was taken.
g3pkatmlatency	1.3.6.1.4.1.6889.2.8.1.89
INT g3pkatmlatencyTage	1.3.6.1.4.1.6889.2.8.1.89.1	INTEGER	read-only	The number of timeticks since the peak atm latency data was last extracted from the switch by the Proxy Agent. This object along with the g3pkatmlatencyintvl object allows the Network Manager to determine the validity of the peak atm latency data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3pkatmlatencyTintvl	1.3.6.1.4.1.6889.2.8.1.89.2	INTEGER	read-write	An object containing the interval for which the peak atm latency data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the peak atm latency objects is received by the agent it uses the g3pkatmlatencyage and g3pkatmlatencyintvl objects to determine whether it should refresh the cached pkatmlatencyTable. If g3pkatmlatencystmp + g3pkatmlatencyintvl is less than the current value of the sysUpTime object then the agent refreshes the pkatmlatencyTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3pkatmlatencyTdelay	1.3.6.1.4.1.6889.2.8.1.89.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3pkatmlatencyTretrieve	1.3.6.1.4.1.6889.2.8.1.89.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3pkatmlatencyTcount	1.3.6.1.4.1.6889.2.8.1.89.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3pkatmlatencyTable	1.3.6.1.4.1.6889.2.8.1.89.6		not-accessible	A list of g3pkatmlatency entries.
g3pkatmlatencyEntry	1.3.6.1.4.1.6889.2.8.1.89.6.1		not-accessible	A g3pkatmlatency entry containing objects of the g3pkatmlatency information sent by the switch.
INT g3pkatmlatencyPNPair	1.3.6.1.4.1.6889.2.8.1.89.6.1.1	INTEGER	read-only	An INTEGER object containing an index numbering the PN Pair.
INT g3pkatmlatencyYear	1.3.6.1.4.1.6889.2.8.1.89.6.1.2	INTEGER	read-only	An object containing the Year the command was executed.
INT g3pkatmlatencyMonth	1.3.6.1.4.1.6889.2.8.1.89.6.1.3	INTEGER	read-only	An object containing the Month the command was executed.
INT g3pkatmlatencyDay	1.3.6.1.4.1.6889.2.8.1.89.6.1.4	INTEGER	read-only	An object containing the Day the command was executed.
INT g3pkatmlatencyHour	1.3.6.1.4.1.6889.2.8.1.89.6.1.5	INTEGER	read-only	An object containing the Hour the command was executed.
INT g3pkatmlatencyPNOrig1	1.3.6.1.4.1.6889.2.8.1.89.6.1.6	INTEGER	read-only	Originating Port Network for the PN Pair.
INT g3pkatmlatencyPNDest1	1.3.6.1.4.1.6889.2.8.1.89.6.1.7	INTEGER	read-only	Originating Port Network for the PN Pair.
INT g3pkatmlatencyCount1A	1.3.6.1.4.1.6889.2.8.1.89.6.1.8	INTEGER	read-only	An object containing the number (count) of connections for the PN Pair on A-PNC.
INT g3pkatmlatencySetup1A	1.3.6.1.4.1.6889.2.8.1.89.6.1.9	INTEGER	read-only	An object containing the average PN connection setup time (latency) in milliseconds for the PN Pair on A-PNC.
INT g3pkatmlatencyATMCount1A	1.3.6.1.4.1.6889.2.8.1.89.6.1.10	INTEGER	read-only	An object containing the number (count) of ATM network connections for the PN Pair on A-PNC.
INT g3pkatmlatencyATMSetup1A	1.3.6.1.4.1.6889.2.8.1.89.6.1.11	INTEGER	read-only	An object containing the average ATM network connection setup time (latency) in milliseconds for the PN Pair on A-PNC.
INT g3pkatmlatencyMeasHour1A	1.3.6.1.4.1.6889.2.8.1.89.6.1.12	INTEGER	read-only	An object containing the Hour the PN Pair A-PNC measurement was taken.
INT g3pkatmlatencyCount1B	1.3.6.1.4.1.6889.2.8.1.89.6.1.13	INTEGER	read-only	An object containing the number (count) of connections for the PN Pair on B-PNC.
INT g3pkatmlatencySetup1B	1.3.6.1.4.1.6889.2.8.1.89.6.1.14	INTEGER	read-only	An object containing the average PN connection setup time (latency) in milliseconds for the PN Pair on B-PNC.
INT g3pkatmlatencyATMCount1B	1.3.6.1.4.1.6889.2.8.1.89.6.1.15	INTEGER	read-only	An object containing the number (count) of ATM network connections for the PN Pair on B-PNC.
INT g3pkatmlatencyATMSetup1B	1.3.6.1.4.1.6889.2.8.1.89.6.1.16	INTEGER	read-only	An object containing the average ATM network connection setup time (latency) in milliseconds for the PN Pair on B-PNC.
INT g3pkatmlatencyMeasHour1B	1.3.6.1.4.1.6889.2.8.1.89.6.1.17	INTEGER	read-only	An object containing the Hour the PN Pair B-PNC measurement was taken.
g3ipcodecsum	1.3.6.1.4.1.6889.2.8.1.90
INT g3ipcodecsumTage	1.3.6.1.4.1.6889.2.8.1.90.1	INTEGER	read-only	The number of timeticks since the ip codec summary data was last extracted from the switch by the Proxy Agent. This object along with the g3ipcodecsumintvl object allows the Network Manager to determine the validity of the ip codec summary data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3ipcodecsumTintvl	1.3.6.1.4.1.6889.2.8.1.90.2	INTEGER	read-write	An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the ip codec summary objects is received by the agent it uses the g3ipcodecsumage and g3ipcodecsumintvl objects to determine whether it should refresh the cached ipcodecsumTable. If g3ipcodecsumstmp + g3ipcodecsumintvl is less than the current value of the sysUpTime object then the agent refreshes the ipcodecsumTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3ipcodecsumTdelay	1.3.6.1.4.1.6889.2.8.1.90.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3ipcodecsumTretrieve	1.3.6.1.4.1.6889.2.8.1.90.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3ipcodecsumTcount	1.3.6.1.4.1.6889.2.8.1.90.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3ipcodecsumTable	1.3.6.1.4.1.6889.2.8.1.90.6		not-accessible	A list of g3ipcodecsum entries.
g3ipcodecsumEntry	1.3.6.1.4.1.6889.2.8.1.90.6.1		not-accessible	A g3ipcodecsum entry containing objects of the g3ipcodecsum information sent by the switch.
INT g3ipcodecsumRegion	1.3.6.1.4.1.6889.2.8.1.90.6.1.1	INTEGER	read-only	An object containing The network region that the IP Media Processors and Medpros for this measurement are in. Range: 1-44.
INT g3ipcodecsumMeasHour	1.3.6.1.4.1.6889.2.8.1.90.6.1.2	INTEGER	read-only	An object containing the Hour the measurement was taken
INT g3ipcodecsumYear	1.3.6.1.4.1.6889.2.8.1.90.6.1.3	INTEGER	read-only	An object containing the Year the command was executed
INT g3ipcodecsumMonth	1.3.6.1.4.1.6889.2.8.1.90.6.1.4	INTEGER	read-only	An object containing the Month the command was executed
INT g3ipcodecsumDay	1.3.6.1.4.1.6889.2.8.1.90.6.1.5	INTEGER	read-only	An object containing the Day the command was executed
INT g3ipcodecsumHour	1.3.6.1.4.1.6889.2.8.1.90.6.1.6	INTEGER	read-only	An object containing the Hour the command was executed
INT g3ipcodecsumDSPRecs	1.3.6.1.4.1.6889.2.8.1.90.6.1.7	INTEGER	read-only	An object containing the total IP codec resources (voice channels) in the region.
STR g3ipcodecsumG711Usage	1.3.6.1.4.1.6889.2.8.1.90.6.1.8	DisplayString	read-only	An object containing the usage in Erlangs of G.711 codecs during the measurement interval. Includes time that the voice channels are on a call. Usage shall be measured from the time the voice channel is allocated until it is released.
INT g3ipcodecsumG711InRegion	1.3.6.1.4.1.6889.2.8.1.90.6.1.9	INTEGER	read-only	An object containing the total number of times an IP media processor port in the region was allocated to a G.711 call. Range: 0-65535.
INT g3ipcodecsumG711OutRegion	1.3.6.1.4.1.6889.2.8.1.90.6.1.10	INTEGER	read-only	An object containing the total number of times an IP media processor port was needed in the region for a G.711 call, but was successfully allocated to a resource in another region. Out of Region does not include denials.
STR g3ipcodecsumG723Usage	1.3.6.1.4.1.6889.2.8.1.90.6.1.11	DisplayString	read-only	An object containing the usage in Erlangs of G.723 or G.729 codecs during the measurement interval. Includes time that the voice channels are on a call. Usage is measured from the time the voice channel is allocated until it is released.
INT g3ipcodecsumG723InRegion	1.3.6.1.4.1.6889.2.8.1.90.6.1.12	INTEGER	read-only	An object containing the total number of times an IP media processor port in the region was allocated to a G.723 or G.729 call. Range: 0-65535.
INT g3ipcodecsumG723OutRegion	1.3.6.1.4.1.6889.2.8.1.90.6.1.13	INTEGER	read-only	An object containing the total number of times an IP media processor port was needed in the region for a G.723 or G.729 call, but was successfully allocated to a resource in another region. Out of Region does not include denials.
g3pkipcodecsum	1.3.6.1.4.1.6889.2.8.1.91
INT g3pkipcodecsumTage	1.3.6.1.4.1.6889.2.8.1.91.1	INTEGER	read-only	The number of timeticks since the peak ip codec summary data was last extracted from the switch by the Proxy Agent. This object along with the g3pkipcodecsumintvl object allows the Network Manager to determine the validity of the peak ip codec summary data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3pkipcodecsumTintvl	1.3.6.1.4.1.6889.2.8.1.91.2	INTEGER	read-write	An object containing the interval for which the peak ip codec summary data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the peak ip codec summary data objects is received by the agent it uses the g3pkipcodecsumage and g3pkipcodecsumintvl objects to determine whether it should refresh the cached pkipcodecsumTable. If g3pkipcodecsumstmp + g3pkipcodecsumintvl is less than the current value of the sysUpTime object then the agent refreshes the pkipcodecsumTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3pkipcodecsumTdelay	1.3.6.1.4.1.6889.2.8.1.91.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3pkipcodecsumTretrieve	1.3.6.1.4.1.6889.2.8.1.91.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3pkipcodecsumTcount	1.3.6.1.4.1.6889.2.8.1.91.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3pkipcodecsumTable	1.3.6.1.4.1.6889.2.8.1.91.6		not-accessible	A list of g3pkipcodecsum entries.
g3pkipcodecsumEntry	1.3.6.1.4.1.6889.2.8.1.91.6.1		not-accessible	A g3pkipcodecsum entry containing objects of the g3pkipcodecsum information sent by the switch.
INT g3pkipcodecsumRegion	1.3.6.1.4.1.6889.2.8.1.91.6.1.1	INTEGER	read-only	An object containing
INT g3pkipcodecsumMeasHour	1.3.6.1.4.1.6889.2.8.1.91.6.1.2	INTEGER	read-only	An object containing the Hour the measurement was taken
INT g3pkipcodecsumYear	1.3.6.1.4.1.6889.2.8.1.91.6.1.3	INTEGER	read-only	An object containing the Year the command was executed
INT g3pkipcodecsumMonth	1.3.6.1.4.1.6889.2.8.1.91.6.1.4	INTEGER	read-only	An object containing the Month the command was executed
INT g3pkipcodecsumDay	1.3.6.1.4.1.6889.2.8.1.91.6.1.5	INTEGER	read-only	An object containing the Day the command was executed
INT g3pkipcodecsumHour	1.3.6.1.4.1.6889.2.8.1.91.6.1.6	INTEGER	read-only	An object containing the Hour the command was executed
INT g3pkipcodecsumDSPRecs	1.3.6.1.4.1.6889.2.8.1.91.6.1.7	INTEGER	read-only	An object containing the total IP codec resources (voice channels) in the region
STR g3pkipcodecsumG711Usage	1.3.6.1.4.1.6889.2.8.1.91.6.1.8	DisplayString	read-only	An object containing the usage in Erlangs of G.711 codecs during the measurement interval. Includes time that the voice channels are on a call. Usage shall be measured from the time the voice channel is allocated until it is released
INT g3pkipcodecsumG711InRegion	1.3.6.1.4.1.6889.2.8.1.91.6.1.9	INTEGER	read-only	An object containing the total number of times an IP media processor port in the region was allocated to a G.711 call. Range: 0-65535.
INT g3pkipcodecsumG711OutRegion	1.3.6.1.4.1.6889.2.8.1.91.6.1.10	INTEGER	read-only	An object containing the total number of times an IP media processor port was needed in the region for a G.711 call, but was successfully allocated to a resource in another region. Out of Region does not include denials.
STR g3pkipcodecsumG723Usage	1.3.6.1.4.1.6889.2.8.1.91.6.1.11	DisplayString	read-only	An object containing the usage in Erlangs of G.723 or G.729 codecs during the measurement interval. Includes time that the voice channels are on a call. Usage shall be measured from the time the voice channel is allocated until it is released.
INT g3pkipcodecsumG723InRegion	1.3.6.1.4.1.6889.2.8.1.91.6.1.12	INTEGER	read-only	An object containing the total number of times an IP media processor port in the region was allocated to a G.723 or G.729 call. Range: 0-65535.
INT g3pkipcodecsumG723OutRegion	1.3.6.1.4.1.6889.2.8.1.91.6.1.13	INTEGER	read-only	An object containing the total number of times an IP media processor port was needed in the region for a G.723 or G.729 call, but was successfully allocated to a resource in another region. Out of Region does not include denials.
g3ipregion	1.3.6.1.4.1.6889.2.8.1.92
INT g3ipregionTage	1.3.6.1.4.1.6889.2.8.1.92.1	INTEGER	read-only	The number of timeticks since the ip network region data was last extracted from the switch by the Proxy Agent. This object along with the g3ipregionintvl object allows the Network Manager to determine the validity of the ip network region data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3ipregionTintvl	1.3.6.1.4.1.6889.2.8.1.92.2	INTEGER	read-write	An object containing the interval for which the ip network region data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the ip network region objects is received by the agent it uses the g3ipregionage and g3ipregionintvl objects to determine whether it should refresh the cached ipregionTable. If g3ipregionstmp + g3ipregionintvl is less than the current value of the sysUpTime object then the agent refreshes the ipregionTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3ipregionTdelay	1.3.6.1.4.1.6889.2.8.1.92.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3ipregionTretrieve	1.3.6.1.4.1.6889.2.8.1.92.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3ipregionTcount	1.3.6.1.4.1.6889.2.8.1.92.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3ipregionTable	1.3.6.1.4.1.6889.2.8.1.92.6		not-accessible	A list of g3ipregion entries.
g3ipregionEntry	1.3.6.1.4.1.6889.2.8.1.92.6.1		not-accessible	A g3ipregion entry containing objects of the g3ipregion information sent by the switch.
INT g3ipregionRegion	1.3.6.1.4.1.6889.2.8.1.92.6.1.1	INTEGER	read-only	An object containing the network region of the IP media processors being region number is assigned on the Ip-interfaces screen during switch administration. Range:1-44
STR g3ipregionName	1.3.6.1.4.1.6889.2.8.1.92.6.1.2	DisplayString	read-only	An object containing the name of the ip-network region
g3ipdspsum	1.3.6.1.4.1.6889.2.8.1.93
INT g3ipdspsumTage	1.3.6.1.4.1.6889.2.8.1.93.1	INTEGER	read-only	The number of timeticks since the ip dsp resource data was last extracted from the switch by the Proxy Agent. This object along with the g3ipdspsumintvl object allows the Network Manager to determine the validity of the ip dsp resource data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3ipdspsumTintvl	1.3.6.1.4.1.6889.2.8.1.93.2	INTEGER	read-write	An object containing the interval for which the ip dsp resource data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the ip dsp resource objects is received by the agent it uses the g3ipdspsumage and g3ipdspsumintvl objects to determine whether it should refresh the cached ipdspsumTable. If g3ipdspsumstmp + g3ipdspsumintvl is less than the current value of the sysUpTime object then the agent refreshes the ipdspsumTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3ipdspsumTdelay	1.3.6.1.4.1.6889.2.8.1.93.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3ipdspsumTretrieve	1.3.6.1.4.1.6889.2.8.1.93.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3ipdspsumTcount	1.3.6.1.4.1.6889.2.8.1.93.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3ipdspsumTable	1.3.6.1.4.1.6889.2.8.1.93.6		not-accessible	A list of g3ipdspsum entries.
g3ipdspsumEntry	1.3.6.1.4.1.6889.2.8.1.93.6.1		not-accessible	A g3ipdspsum entry containing objects of the g3ipdspsum information sent by the switch.
INT g3ipdspsumRegion	1.3.6.1.4.1.6889.2.8.1.93.6.1.1	INTEGER	read-only	An object containing the network region of the IP media processors being measured. The region number is assigned on the Ip-interfaces screen during switch administration.Range:1-44
INT g3ipdspsumMeasHour	1.3.6.1.4.1.6889.2.8.1.93.6.1.2	INTEGER	read-only	An object containing the hour the measurement was taken
INT g3ipdspsumYear	1.3.6.1.4.1.6889.2.8.1.93.6.1.3	INTEGER	read-only	An object containing the Year the command was executed
INT g3ipdspsumMonth	1.3.6.1.4.1.6889.2.8.1.93.6.1.4	INTEGER	read-only	An object containing the Month the command was executed
INT g3ipdspsumDay	1.3.6.1.4.1.6889.2.8.1.93.6.1.5	INTEGER	read-only	An object containing the Day the command was executed
INT g3ipdspsumHour	1.3.6.1.4.1.6889.2.8.1.93.6.1.6	INTEGER	read-only	An object containing the Hour the command was executed
INT g3ipdspsumDSPRecs	1.3.6.1.4.1.6889.2.8.1.93.6.1.7	INTEGER	read-only	An object containing the total number of IP codec resources, or voice channels, in the region. Range:0-9999
STR g3ipdspsumDSPUsage	1.3.6.1.4.1.6889.2.8.1.93.6.1.8	DisplayString	read-only	An object containing the amount of time (in erlangs) that all codecs were in use during the measurement period. The time is measured from the time the voice channel is allocated until it is released,including the time that the voice channel is on a call. Range:0-9999
INT g3ipdspsumInRegion	1.3.6.1.4.1.6889.2.8.1.93.6.1.9	INTEGER	read-only	An object containing the total number of times an IP media processor port in the region was allocated to a call. Range:0-65535
INT g3ipdspsumOutRegion	1.3.6.1.4.1.6889.2.8.1.93.6.1.10	INTEGER	read-only	An object containing the total number of times an IP media processor port was needed in the region for a call, but was successfully allocated to a resource in another region. Range:0-65535
INT g3ipdspsumDenied	1.3.6.1.4.1.6889.2.8.1.93.6.1.11	INTEGER	read-only	An object containing the total number of times an IP media processor port was needed in the region for a call, but all media ports in all regions were busy and the call did not go through. Range:0-65535
STR g3ipdspsumPctBlk	1.3.6.1.4.1.6889.2.8.1.93.6.1.12	DisplayString	read-only	An object containing
STR g3ipdspsumPctOutSrv	1.3.6.1.4.1.6889.2.8.1.93.6.1.13	DisplayString	read-only	An object containing
g3pkipdspsum	1.3.6.1.4.1.6889.2.8.1.94
INT g3pkipdspsumTage	1.3.6.1.4.1.6889.2.8.1.94.1	INTEGER	read-only	The number of timeticks since the peak ip dsp resource data was last extracted from the switch by the Proxy Agent. This object along with the g3pkipdspsumintvl object allows the Network Manager to determine the validity of the peak ip dsp resource data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3pkipdspsumTintvl	1.3.6.1.4.1.6889.2.8.1.94.2	INTEGER	read-write	An object containing the interval for which the peak ip dsp resource data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the peak ip dsp resource objects is received by the agent it uses the g3pkipdspsumage and g3pkipdspsumintvl objects to determine whether it should refresh the cached pkipdspsumTable. If g3pkipdspsumstmp + g3pkipdspsumintvl is less than the current value of the sysUpTime object then the agent refreshes the pkipdspsumTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3pkipdspsumTdelay	1.3.6.1.4.1.6889.2.8.1.94.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3pkipdspsumTretrieve	1.3.6.1.4.1.6889.2.8.1.94.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3pkipdspsumTcount	1.3.6.1.4.1.6889.2.8.1.94.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3pkipdspsumTable	1.3.6.1.4.1.6889.2.8.1.94.6		not-accessible	A list of g3pkipdspsum entries.
g3pkipdspsumEntry	1.3.6.1.4.1.6889.2.8.1.94.6.1		not-accessible	A g3pkipdspsum entry containing objects of the g3pkipdspsum information sent by the switch.
INT g3pkipdspsumRegion	1.3.6.1.4.1.6889.2.8.1.94.6.1.1	INTEGER	read-only	An object containing
INT g3pkipdspsumMeasHour	1.3.6.1.4.1.6889.2.8.1.94.6.1.2	INTEGER	read-only	An object containing the Hour the measurement was taken
INT g3pkipdspsumYear	1.3.6.1.4.1.6889.2.8.1.94.6.1.3	INTEGER	read-only	An object containing the Year the command was executed
INT g3pkipdspsumMonth	1.3.6.1.4.1.6889.2.8.1.94.6.1.4	INTEGER	read-only	An object containing the Month the command was executed
INT g3pkipdspsumDay	1.3.6.1.4.1.6889.2.8.1.94.6.1.5	INTEGER	read-only	An object containing the Day the command was executed
INT g3pkipdspsumHour	1.3.6.1.4.1.6889.2.8.1.94.6.1.6	INTEGER	read-only	An object containing the Hour the command was executed
INT g3pkipdspsumDSPRecs	1.3.6.1.4.1.6889.2.8.1.94.6.1.7	INTEGER	read-only	An object containing total number of IP codec resources, or voice channels, in the region. Range:0-9999
STR g3pkipdspsumDSPUsage	1.3.6.1.4.1.6889.2.8.1.94.6.1.8	DisplayString	read-only	An object containing amount of time (in erlangs) that all codecs were in use during the measurement period. The time is measured from the time the voice channel is allocated until it is released,including the time that the voice channel is on a call. Range:0-9999
INT g3pkipdspsumInRegion	1.3.6.1.4.1.6889.2.8.1.94.6.1.9	INTEGER	read-only	An object containing the total number of times an IP media processor port in the region was allocated to a call.Range:0-65535
INT g3pkipdspsumOutRegion	1.3.6.1.4.1.6889.2.8.1.94.6.1.10	INTEGER	read-only	An object containing the total number of times an IP media processor port was needed in the region for a call, but was successfully allocated to a resource in another region. Range: 0-65535
INT g3pkipdspsumDenied	1.3.6.1.4.1.6889.2.8.1.94.6.1.11	INTEGER	read-only	An object containing The total number of times an IP media processor port was needed in the region for a call, but all media ports in all regions were busy and the call did not go through. Range:0-65535
STR g3pkipdspsumPctBlk	1.3.6.1.4.1.6889.2.8.1.94.6.1.12	DisplayString	read-only	An object containing the percent of attempted use of IP media processor ports in the region that were not successful (blocked). This percent includes calls that were denied after they were successfully allocated out of the region.
STR g3pkipdspsumPctOutSrv	1.3.6.1.4.1.6889.2.8.1.94.6.1.13	DisplayString	read-only	An object containing the percent of CCS time that any IP media processor ports were out of service during the measurement period. This percent includes ports that were manually busied out or maintenance busy during the measured interval.
g3ipsignal	1.3.6.1.4.1.6889.2.8.1.95
INT g3ipsignalTage	1.3.6.1.4.1.6889.2.8.1.95.1	INTEGER	read-only	The number of timeticks since the ip signaling group data was last extracted from the switch by the Proxy Agent. This object along with the g3ipsignalintvl object allows the Network Manager to determine the validity of the ip signaling group data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3ipsignalTintvl	1.3.6.1.4.1.6889.2.8.1.95.2	INTEGER	read-write	An object containing the interval for which the ip signaling group data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the ip signaling group objects is received by the agent it uses the g3ipsignalage and g3ipsignalintvl objects to determine whether it should refresh the cached ipsignalTable. If g3ipsignalstmp + g3ipsignalintvl is less than the current value of the sysUpTime object then the agent refreshes the ipsignalTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3ipsignalTdelay	1.3.6.1.4.1.6889.2.8.1.95.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3ipsignalTretrieve	1.3.6.1.4.1.6889.2.8.1.95.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3ipsignalTcount	1.3.6.1.4.1.6889.2.8.1.95.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3ipsignalTable	1.3.6.1.4.1.6889.2.8.1.95.6		not-accessible	A list of g3ipsignal entries.
g3ipsignalEntry	1.3.6.1.4.1.6889.2.8.1.95.6.1		not-accessible	A g3ipsignal entry containing objects of the g3ipsignal information sent by the switch.
INT g3ipsignalSigGroup	1.3.6.1.4.1.6889.2.8.1.95.6.1.1	INTEGER	read-only	An object containing the ip signaling group number
INT g3ipsignalRegion	1.3.6.1.4.1.6889.2.8.1.95.6.1.2	INTEGER	read-only	An object containing the network region of the ip signaling group
INT g3ipsignalYear	1.3.6.1.4.1.6889.2.8.1.95.6.1.3	INTEGER	read-only	An object containing the Year the command was executed
INT g3ipsignalMonth	1.3.6.1.4.1.6889.2.8.1.95.6.1.4	INTEGER	read-only	An object containing the Month the command was executed
INT g3ipsignalDay	1.3.6.1.4.1.6889.2.8.1.95.6.1.5	INTEGER	read-only	An object containing the Day the command was executed
INT g3ipsignalHour	1.3.6.1.4.1.6889.2.8.1.95.6.1.6	INTEGER	read-only	An object containing the Hour the command was executed
INT g3ipsignalHourAvgLatency	1.3.6.1.4.1.6889.2.8.1.95.6.1.7	INTEGER	read-only	An object containing the average latency for the whole hour
INT g3ipsignalHourPacketsSent	1.3.6.1.4.1.6889.2.8.1.95.6.1.8	INTEGER	read-only	An object containing the number of packets sent during the whole hour
INT g3ipsignalHourPktsLostPct	1.3.6.1.4.1.6889.2.8.1.95.6.1.9	INTEGER	read-only	An object containing the percent lost packets for the whole hour
INT g3ipsignalMeasHour	1.3.6.1.4.1.6889.2.8.1.95.6.1.10	INTEGER	read-only	An object containing the Hour the measurement was taken
INT g3ipsignalWorstInterval	1.3.6.1.4.1.6889.2.8.1.95.6.1.11	INTEGER	read-only	An object containing the hour and worst 3 minute interval within the hour.
INT g3ipsignalIntvlAvgLatency	1.3.6.1.4.1.6889.2.8.1.95.6.1.12	INTEGER	read-only	An object containing the average latency for the interval.
INT g3ipsignalIntvlPacketsSent	1.3.6.1.4.1.6889.2.8.1.95.6.1.13	INTEGER	read-only	An object containing the number of packets sent during the interval.
INT g3ipsignalIntvlPktsLostPct	1.3.6.1.4.1.6889.2.8.1.95.6.1.14	INTEGER	read-only	An object containing the percent of packets lost for the interval
g3pkipsignal	1.3.6.1.4.1.6889.2.8.1.96
INT g3pkipsignalTage	1.3.6.1.4.1.6889.2.8.1.96.1	INTEGER	read-only	The number of timeticks since the peak ip signaling group data was last extracted from the switch by the Proxy Agent. This object along with the g3pkipsignalintvl object allows the Network Manager to determine the validity of the peak ip signaling group data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3pkipsignalTintvl	1.3.6.1.4.1.6889.2.8.1.96.2	INTEGER	read-write	An object containing the interval for which the peak ip signaling group data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the peak ip signaling group objects is received by the agent it uses the g3pkipsignalage and g3pkipsignalintvl objects to determine whether it should refresh the cached pkipsignalTable. If g3pkipsignalstmp + g3pkipsignalintvl is less than the current value of the sysUpTime object then the agent refreshes the pkipsignalTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3pkipsignalTdelay	1.3.6.1.4.1.6889.2.8.1.96.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3pkipsignalTretrieve	1.3.6.1.4.1.6889.2.8.1.96.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3pkipsignalTcount	1.3.6.1.4.1.6889.2.8.1.96.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3pkipsignalTable	1.3.6.1.4.1.6889.2.8.1.96.6		not-accessible	A list of g3pkipsignal entries.
g3pkipsignalEntry	1.3.6.1.4.1.6889.2.8.1.96.6.1		not-accessible	A g3pkipsignal entry containing objects of the g3pkipsignal information sent by the switch.
INT g3pkipsignalSigGroup	1.3.6.1.4.1.6889.2.8.1.96.6.1.1	INTEGER	read-only	An object containing the ip signaling group number
INT g3pkipsignalRegion	1.3.6.1.4.1.6889.2.8.1.96.6.1.2	INTEGER	read-only	An object containing the network region of the ip signaling group
INT g3pkipsignalYear	1.3.6.1.4.1.6889.2.8.1.96.6.1.3	INTEGER	read-only	An object containing the Year the command was executed
INT g3pkipsignalMonth	1.3.6.1.4.1.6889.2.8.1.96.6.1.4	INTEGER	read-only	An object containing the Month the command was executed
INT g3pkipsignalDay	1.3.6.1.4.1.6889.2.8.1.96.6.1.5	INTEGER	read-only	An object containing the Day the command was executed
INT g3pkipsignalHour	1.3.6.1.4.1.6889.2.8.1.96.6.1.6	INTEGER	read-only	An object containing the Hour the command was executed
INT g3pkipsignalHourAvgLatency	1.3.6.1.4.1.6889.2.8.1.96.6.1.7	INTEGER	read-only	An object containing the average latency for the whole hour
INT g3pkipsignalHourPacketsSent	1.3.6.1.4.1.6889.2.8.1.96.6.1.8	INTEGER	read-only	An object containing the number of packets sent during the whole hour
INT g3pkipsignalHourPktsLostPct	1.3.6.1.4.1.6889.2.8.1.96.6.1.9	INTEGER	read-only	An object containing the percent of packets lost for the whole hour
INT g3pkipsignalMeasHour	1.3.6.1.4.1.6889.2.8.1.96.6.1.10	INTEGER	read-only	An object containing the Hour the measurement was taken
INT g3pkipsignalWorstInterval	1.3.6.1.4.1.6889.2.8.1.96.6.1.11	INTEGER	read-only	An object containing the hour and worst 3 minute interval within the hour
INT g3pkipsignalIntvlAvgLatency	1.3.6.1.4.1.6889.2.8.1.96.6.1.12	INTEGER	read-only	An object containing the average latency for the interval
INT g3pkipsignalIntvlPacketsSent	1.3.6.1.4.1.6889.2.8.1.96.6.1.13	INTEGER	read-only	An object containing the number of packets sent during the interval
INT g3pkipsignalIntvlPktsLostPct	1.3.6.1.4.1.6889.2.8.1.96.6.1.14	INTEGER	read-only	An object containing the percent of packets lost for the interval
g3annall	1.3.6.1.4.1.6889.2.8.1.97
INT g3annallTage	1.3.6.1.4.1.6889.2.8.1.97.1	INTEGER	read-only	The number of timeticks since the announcement data was last extracted from the switch by the Proxy Agent. This object along with the g3annallintvl object allows the Network Manager to determine the validity of the announcement data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3annallTintvl	1.3.6.1.4.1.6889.2.8.1.97.2	INTEGER	read-write	An object containing the interval for which the announcement data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the announcement objects is received by the agent it uses the g3annallage and g3annallintvl objects to determine whether it should refresh the cached annallTable. If g3annallstmp + g3annallintvl is less than the current value of the sysUpTime object then the agent refreshes the annallTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3annallTdelay	1.3.6.1.4.1.6889.2.8.1.97.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3annallTretrieve	1.3.6.1.4.1.6889.2.8.1.97.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3annallTcount	1.3.6.1.4.1.6889.2.8.1.97.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3annallTable	1.3.6.1.4.1.6889.2.8.1.97.6		not-accessible	A list of g3annall entries.
g3annallEntry	1.3.6.1.4.1.6889.2.8.1.97.6.1		not-accessible	A g3annall entry containing objects of the g3annall information sent by the switch.
INT g3annallAnnNbr	1.3.6.1.4.1.6889.2.8.1.97.6.1.1	INTEGER	read-only	An object containing the announcement number
INT g3annallYear	1.3.6.1.4.1.6889.2.8.1.97.6.1.2	INTEGER	read-only	An object containing the Year the command was executed
INT g3annallMonth	1.3.6.1.4.1.6889.2.8.1.97.6.1.3	INTEGER	read-only	An object containing the Month the command was executed
INT g3annallDay	1.3.6.1.4.1.6889.2.8.1.97.6.1.4	INTEGER	read-only	An object containing the Day the command was executed
INT g3annallHour	1.3.6.1.4.1.6889.2.8.1.97.6.1.5	INTEGER	read-only	An object containing the Hour the command was executed
STR g3annallExtension	1.3.6.1.4.1.6889.2.8.1.97.6.1.6	DisplayString	read-only	An object containing the extension number for the announcement
STR g3annallName	1.3.6.1.4.1.6889.2.8.1.97.6.1.7	DisplayString	read-only	An object containing the first 24 characters of the announcement
INT g3annallMeasHour	1.3.6.1.4.1.6889.2.8.1.97.6.1.8	INTEGER	read-only	An object containing the Hour the measurement was taken
INT g3annallPlayRequests	1.3.6.1.4.1.6889.2.8.1.97.6.1.9	INTEGER	read-only	An object containing total number of calls that requested a play of this announcement during the period
INT g3annallCallsQueued	1.3.6.1.4.1.6889.2.8.1.97.6.1.10	INTEGER	read-only	An object containing the number of calls for an announcement that had to queue waiting for a port during the period
INT g3annallASP	1.3.6.1.4.1.6889.2.8.1.97.6.1.11	INTEGER	read-only	An object containing from time waiting for announcement to play to when it starts playing in seconds averaged over the period. Calls abandoned while in the waiting for announcement port queue are not to be included
INT g3annallQueueDrops	1.3.6.1.4.1.6889.2.8.1.97.6.1.12	INTEGER	read-only	An object containing - count of the individual calls that had to queue but dropped while waiting during the period - this includes calls abandoned by the caller and VOA (VDN of origin Announcements) aborts but should exclude calls that were waiting but answered by an agent
INT g3annallMPortPlay	1.3.6.1.4.1.6889.2.8.1.97.6.1.13	INTEGER	read-only	An object containing - count of how many times the announcement is being played out of more than one port at the same time during the period
INT g3annallMaxPorts	1.3.6.1.4.1.6889.2.8.1.97.6.1.14	INTEGER	read-only	An object containing the peak number of ports used for the announcement during the period
INT g3annallMaxCallers	1.3.6.1.4.1.6889.2.8.1.97.6.1.15	INTEGER	read-only	An object containing the peak number callers connected to a port at the same time for this announcement during the period
g3pkannall	1.3.6.1.4.1.6889.2.8.1.98
INT g3pkannallTage	1.3.6.1.4.1.6889.2.8.1.98.1	INTEGER	read-only	The number of timeticks since the announcement data was last extracted from the switch by the Proxy Agent. This object along with the g3pkannallintvl object allows the Network Manager to determine the validity of the announcement data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3pkannallTintvl	1.3.6.1.4.1.6889.2.8.1.98.2	INTEGER	read-write	An object containing the interval for which the Announcement data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the announcement objects is received by the agent it uses the g3pkannallage and g3pkannallintvl objects to determine whether it should refresh the cached pkannallTable. If g3pkannallstmp + g3pkannallintvl is less than the current value of the sysUpTime object then the agent refreshes the pkannallTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3pkannallTdelay	1.3.6.1.4.1.6889.2.8.1.98.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3pkannallTretrieve	1.3.6.1.4.1.6889.2.8.1.98.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3pkannallTcount	1.3.6.1.4.1.6889.2.8.1.98.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3pkannallTable	1.3.6.1.4.1.6889.2.8.1.98.6		not-accessible	A list of g3pkannall entries.
g3pkannallEntry	1.3.6.1.4.1.6889.2.8.1.98.6.1		not-accessible	A g3pkannall entry containing objects of the g3pkannall information sent by the switch.
INT g3pkannallAnnNbr	1.3.6.1.4.1.6889.2.8.1.98.6.1.1	INTEGER	read-only	An object containing the announcement number
INT g3pkannallYear	1.3.6.1.4.1.6889.2.8.1.98.6.1.2	INTEGER	read-only	An object containing the Year the command was executed
INT g3pkannallMonth	1.3.6.1.4.1.6889.2.8.1.98.6.1.3	INTEGER	read-only	An object containing the Month the command was executed
INT g3pkannallDay	1.3.6.1.4.1.6889.2.8.1.98.6.1.4	INTEGER	read-only	An object containing the Day the command was executed
INT g3pkannallHour	1.3.6.1.4.1.6889.2.8.1.98.6.1.5	INTEGER	read-only	An object containing the Hour the command was executed
STR g3pkannallExtension	1.3.6.1.4.1.6889.2.8.1.98.6.1.6	DisplayString	read-only	An object containing the extension number for the announcement
STR g3pkannallName	1.3.6.1.4.1.6889.2.8.1.98.6.1.7	DisplayString	read-only	An object containing the first 24 characters of the announcement
INT g3pkannallMeasHour	1.3.6.1.4.1.6889.2.8.1.98.6.1.8	INTEGER	read-only	An object containing the Hour the measurement was taken
INT g3pkannallPlayRequests	1.3.6.1.4.1.6889.2.8.1.98.6.1.9	INTEGER	read-only	An object containing total number of calls that requested a play of this announcement during the period
INT g3pkannallCallsQueued	1.3.6.1.4.1.6889.2.8.1.98.6.1.10	INTEGER	read-only	An object containing number of calls for an announcement that had to queue waiting for a port during the period
INT g3pkannallASP	1.3.6.1.4.1.6889.2.8.1.98.6.1.11	INTEGER	read-only	An object containing from time waiting for announcement to play to when it starts playing in seconds averaged over the period. Calls abandoned while in the waiting for announcement port queue are not to be included
INT g3pkannallQueueDrops	1.3.6.1.4.1.6889.2.8.1.98.6.1.12	INTEGER	read-only	An object containing count of the individual calls that had to queue but dropped while waiting during the period - this includes calls abandoned by the caller and VOA (VDN of origin Announcements) aborts but should exclude calls that were waiting but answered by an agent)
INT g3pkannallMPortPlay	1.3.6.1.4.1.6889.2.8.1.98.6.1.13	INTEGER	read-only	An object containing count of how many times the announcement is being played out of more than one port at the same time during the period
INT g3pkannallMaxPorts	1.3.6.1.4.1.6889.2.8.1.98.6.1.14	INTEGER	read-only	An object containing the peak number of ports used for the announcement during the period
INT g3pkannallMaxCall	1.3.6.1.4.1.6889.2.8.1.98.6.1.15	INTEGER	read-only	An object containing the peak number callers connected to a port at the same time for this announcement during the period
g3anninteg	1.3.6.1.4.1.6889.2.8.1.99
INT g3annintegTage	1.3.6.1.4.1.6889.2.8.1.99.1	INTEGER	read-only	The number of timeticks since the data was last extracted from the switch by the Proxy Agent. This object along with the g3annintegintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3annintegTintvl	1.3.6.1.4.1.6889.2.8.1.99.2	INTEGER	read-write	An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these data objects is received by the agent it uses the g3annintegage and g3annintegintvl objects to determine whether it should refresh the cached annintegTable. If g3annintegstmp + g3annintegintvl is less than the current value of the sysUpTime object then the agent refreshes the annintegTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3annintegTdelay	1.3.6.1.4.1.6889.2.8.1.99.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3annintegTretrieve	1.3.6.1.4.1.6889.2.8.1.99.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3annintegTcount	1.3.6.1.4.1.6889.2.8.1.99.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3annintegTable	1.3.6.1.4.1.6889.2.8.1.99.6		not-accessible	A list of g3anninteg entries.
g3annintegEntry	1.3.6.1.4.1.6889.2.8.1.99.6.1		not-accessible	A g3anninteg entry containing objects of the g3anninteg information sent by the switch.
STR g3annintegBoard	1.3.6.1.4.1.6889.2.8.1.99.6.1.1	DisplayString	read-only	An object containing the board number for the integrated announcement board
INT g3annintegYear	1.3.6.1.4.1.6889.2.8.1.99.6.1.2	INTEGER	read-only	An object containing the Year the command was executed
INT g3annintegMonth	1.3.6.1.4.1.6889.2.8.1.99.6.1.3	INTEGER	read-only	An object containing the Month the command was executed
INT g3annintegDay	1.3.6.1.4.1.6889.2.8.1.99.6.1.4	INTEGER	read-only	An object containing the Day the command was executed
INT g3annintegHour	1.3.6.1.4.1.6889.2.8.1.99.6.1.5	INTEGER	read-only	An object containing the Hour the command was executed
INT g3annintegPlayPorts	1.3.6.1.4.1.6889.2.8.1.99.6.1.6	INTEGER	read-only	An object containing
INT g3annintegMaxCallPeriod	1.3.6.1.4.1.6889.2.8.1.99.6.1.7	INTEGER	read-only	An object containing
INT g3annintegAllPortsBusy	1.3.6.1.4.1.6889.2.8.1.99.6.1.8	INTEGER	read-only	An object containing an indication of how frequently the all-ports-busy condition occurs within the period of time
INT g3annintegAnnNbr	1.3.6.1.4.1.6889.2.8.1.99.6.1.9	INTEGER	read-only	An object containing the announcement number
STR g3annintegExtension	1.3.6.1.4.1.6889.2.8.1.99.6.1.10	DisplayString	read-only	An object containing the extension number for the announcement
STR g3annintegName	1.3.6.1.4.1.6889.2.8.1.99.6.1.11	DisplayString	read-only	An object containing the first 24 characters of the announcement
INT g3annintegMeasHour	1.3.6.1.4.1.6889.2.8.1.99.6.1.12	INTEGER	read-only	An object containing the Hour the measurement was taken
INT g3annintegPlayReqts	1.3.6.1.4.1.6889.2.8.1.99.6.1.13	INTEGER	read-only	An object containing total number of calls that requested a play of this announcement during the period
INT g3annintegCallsQueued	1.3.6.1.4.1.6889.2.8.1.99.6.1.14	INTEGER	read-only	An object containing number of calls for an announcement that had to queue waiting for a port during the period
INT g3annintegASP	1.3.6.1.4.1.6889.2.8.1.99.6.1.15	INTEGER	read-only	An object containing from time waiting for announcement to play to when it starts playing in seconds averaged over the period. Calls abandoned while in the waiting for announcement port queue are not to be included
INT g3annintegQueueDrops	1.3.6.1.4.1.6889.2.8.1.99.6.1.16	INTEGER	read-only	An object containing count of the individual calls that had to queue but dropped while waiting during the period - this includes calls abandoned by the caller and VOA (VDN of origin Announcements) aborts but should exclude calls that were waiting but answered by an agent
INT g3annintegMPortPlay	1.3.6.1.4.1.6889.2.8.1.99.6.1.17	INTEGER	read-only	An object containing count of how many times the announcement is being played out of more than one port at the same time during the period
INT g3annintegMaxPorts	1.3.6.1.4.1.6889.2.8.1.99.6.1.18	INTEGER	read-only	An object containing the peak number of ports used for the announcement during the period
INT g3annintegMaxCall	1.3.6.1.4.1.6889.2.8.1.99.6.1.19	INTEGER	read-only	An object containing the peak number callers connected to a board (sum of the ports) at the same time
g3pkanninteg	1.3.6.1.4.1.6889.2.8.1.100
INT g3pkannintegTage	1.3.6.1.4.1.6889.2.8.1.100.1	INTEGER	read-only	The number of timeticks since the data was last extracted from the switch by the Proxy Agent. This object along with the g3pkannintegintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3pkannintegTintvl	1.3.6.1.4.1.6889.2.8.1.100.2	INTEGER	read-write	An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these data objects is received by the agent it uses the g3pkannintegage and g3pkannintegintvl objects to determine whether it should refresh the cached pkannintegTable. If g3pkannintegstmp + g3pkannintegintvl is less than the current value of the sysUpTime object then the agent refreshes the pkannintegTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3pkannintegTdelay	1.3.6.1.4.1.6889.2.8.1.100.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3pkannintegTretrieve	1.3.6.1.4.1.6889.2.8.1.100.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3pkannintegTcount	1.3.6.1.4.1.6889.2.8.1.100.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3pkannintegTable	1.3.6.1.4.1.6889.2.8.1.100.6		not-accessible	A list of g3pkanninteg entries.
g3pkannintegEntry	1.3.6.1.4.1.6889.2.8.1.100.6.1		not-accessible	A g3pkanninteg entry containing objects of the g3pkanninteg information sent by the switch.
STR g3pkannintegBoard	1.3.6.1.4.1.6889.2.8.1.100.6.1.1	DisplayString	read-only	An object containing the number of the integrated announcement board
INT g3pkannintegYear	1.3.6.1.4.1.6889.2.8.1.100.6.1.2	INTEGER	read-only	An object containing the Year the command was executed
INT g3pkannintegMonth	1.3.6.1.4.1.6889.2.8.1.100.6.1.3	INTEGER	read-only	An object containing the Month the command was executed
INT g3pkannintegDay	1.3.6.1.4.1.6889.2.8.1.100.6.1.4	INTEGER	read-only	An object containing the Day the command was executed
INT g3pkannintegHour	1.3.6.1.4.1.6889.2.8.1.100.6.1.5	INTEGER	read-only	An object containing the Hour the command was executed
INT g3pkannintegPlayPorts	1.3.6.1.4.1.6889.2.8.1.100.6.1.6	INTEGER	read-only	An object containing the number of ports on the board which can play the announcements.
INT g3pkannintegMaxCallPeriod	1.3.6.1.4.1.6889.2.8.1.100.6.1.7	INTEGER	read-only	An object containing the Maximum number of Callers on Board in the Period
INT g3pkannintegAllPortsBusy	1.3.6.1.4.1.6889.2.8.1.100.6.1.8	INTEGER	read-only	An object containing an indication of how frequently the all-ports-busy condition occurs within the period of time
INT g3pkannintegAnnNbr	1.3.6.1.4.1.6889.2.8.1.100.6.1.9	INTEGER	read-only	An object containing the announcement number
STR g3pkannintegExtension	1.3.6.1.4.1.6889.2.8.1.100.6.1.10	DisplayString	read-only	An object containing the extension number for the announcement
STR g3pkannintegName	1.3.6.1.4.1.6889.2.8.1.100.6.1.11	DisplayString	read-only	An object containing the first 24 characters of the announcement
INT g3pkannintegMeasHour	1.3.6.1.4.1.6889.2.8.1.100.6.1.12	INTEGER	read-only	An object containing the Hour the measurement was taken
INT g3pkannintegPlayReqts	1.3.6.1.4.1.6889.2.8.1.100.6.1.13	INTEGER	read-only	An object containing total number of calls that requested a play of this announcement during the period
INT g3pkannintegCallsQueued	1.3.6.1.4.1.6889.2.8.1.100.6.1.14	INTEGER	read-only	An object containing number of calls for an announcement that had to queue waiting for a port during the period
INT g3pkannintegASP	1.3.6.1.4.1.6889.2.8.1.100.6.1.15	INTEGER	read-only	An object containing from time waiting for announcement to play to when it starts playing in seconds averaged over the period. Calls abandoned while in the waiting for announcement port queue are not to be included
INT g3pkannintegQueueDrops	1.3.6.1.4.1.6889.2.8.1.100.6.1.16	INTEGER	read-only	An object containing count of the individual calls that had to queue but dropped while waiting during the period - this includes calls abandoned by the caller and VOA (VDN of origin Announcements) aborts but should exclude calls that were waiting but answered by an agent
INT g3pkannintegMPortPlay	1.3.6.1.4.1.6889.2.8.1.100.6.1.17	INTEGER	read-only	An object containing count of how many times the announcement is being played out of more than one port at the same time during the period
INT g3pkannintegMaxPorts	1.3.6.1.4.1.6889.2.8.1.100.6.1.18	INTEGER	read-only	An object containing the peak number of ports used for the announcement during the period
INT g3pkannintegMaxCall	1.3.6.1.4.1.6889.2.8.1.100.6.1.19	INTEGER	read-only	An object containing the peak number callers connected to a board (sum of the ports) at the same time
g3nodename	1.3.6.1.4.1.6889.2.8.1.101
INT g3nodenameTage	1.3.6.1.4.1.6889.2.8.1.101.1	INTEGER	read-only	The number of timeticks since the node name data was last extracted from the switch by the Proxy Agent. This object along with the g3nodenameintvl object allows the Network Manager to determine the validity of the node name data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3nodenameTintvl	1.3.6.1.4.1.6889.2.8.1.101.2	INTEGER	read-write	An object containing the interval for which the node name data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these node name objects is received by the agent it uses the g3nodenameage and g3nodenameintvl objects to determine whether it should refresh the cached nodenameTable. If g3nodenamestmp + g3nodenameintvl is less than the current value of the sysUpTime object then the agent refreshes the nodenameTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3nodenameTdelay	1.3.6.1.4.1.6889.2.8.1.101.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3nodenameTretrieve	1.3.6.1.4.1.6889.2.8.1.101.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3nodenameTcount	1.3.6.1.4.1.6889.2.8.1.101.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3nodenameTable	1.3.6.1.4.1.6889.2.8.1.101.6		not-accessible	A list of g3nodename entries.
g3nodenameEntry	1.3.6.1.4.1.6889.2.8.1.101.6.1		not-accessible	A g3nodename entry containing objects of the g3nodename information sent by the switch.
STR g3nodenameName	1.3.6.1.4.1.6889.2.8.1.101.6.1.1	DisplayString	read-only	An object containing the name of the node
STR g3nodenameType	1.3.6.1.4.1.6889.2.8.1.101.6.1.2	DisplayString	read-only	An object containing the type of the node
STR g3nodenameIP1	1.3.6.1.4.1.6889.2.8.1.101.6.1.3	DisplayString	read-only	An object containing the first octet of the IP address
STR g3nodenameIP2	1.3.6.1.4.1.6889.2.8.1.101.6.1.4	DisplayString	read-only	An object containing the second octet of the IP address
STR g3nodenameIP3	1.3.6.1.4.1.6889.2.8.1.101.6.1.5	DisplayString	read-only	An object containing the third octet of the IP address
STR g3nodenameIP4	1.3.6.1.4.1.6889.2.8.1.101.6.1.6	DisplayString	read-only	An object containing the fourth octet of the IP address
g3trkgrpmem	1.3.6.1.4.1.6889.2.8.1.102
INT g3trkgrpmemTage	1.3.6.1.4.1.6889.2.8.1.102.1	INTEGER	read-only	The number of timeticks since the trunk group member data was last extracted from the switch by the Proxy Agent. This object along with the g3trkgrpmemintvl object allows the Network Manager to determine the validity of the trunk group member data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3trkgrpmemTintvl	1.3.6.1.4.1.6889.2.8.1.102.2	INTEGER	read-write	An object containing the interval for which the trunk group member data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these trunk group member objects is received by the agent it uses the g3trkgrpmemage and g3trkgrpmemintvl objects to determine whether it should refresh the cached trkgrpmemTable. If g3trkgrpmemstmp + g3trkgrpmemintvl is less than the current value of the sysUpTime object then the agent refreshes the trkgrpmemTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3trkgrpmemTdelay	1.3.6.1.4.1.6889.2.8.1.102.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3trkgrpmemTretrieve	1.3.6.1.4.1.6889.2.8.1.102.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3trkgrpmemTcount	1.3.6.1.4.1.6889.2.8.1.102.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3trkgrpmemTable	1.3.6.1.4.1.6889.2.8.1.102.6		not-accessible	A list of g3trkgrpmem entries.
g3trkgrpmemEntry	1.3.6.1.4.1.6889.2.8.1.102.6.1		not-accessible	A g3trkgrpmem entry containing objects of the g3trkgrpmem information sent by the switch.
INT g3trkgrpmemGroup	1.3.6.1.4.1.6889.2.8.1.102.6.1.1	INTEGER	read-only	An INTEGER Object that uniquely identifies an administered trunk group.
INT g3trkgrpmemMember	1.3.6.1.4.1.6889.2.8.1.102.6.1.2	INTEGER	read-only	An INTEGER Object that uniquely identifies a trunk group member. Trunk group members range from 1 to 666 and exist whether or not they are assigned a port.
STR g3trkgrpmemName	1.3.6.1.4.1.6889.2.8.1.102.6.1.3	DisplayString	read-only	A DisplayString Object containing the name assigned to the trunk group member.
STR g3trkgrpmemType	1.3.6.1.4.1.6889.2.8.1.102.6.1.4	DisplayString	read-only	A DisplayString Object containing the Type of the trunk group member.
STR g3trkgrpmemSigGroup	1.3.6.1.4.1.6889.2.8.1.102.6.1.5	DisplayString	read-only	A DisplayString Object containing the Signaling Group assigned to the trunk group member.
STR g3trkgrpmemPort	1.3.6.1.4.1.6889.2.8.1.102.6.1.6	DisplayString	read-only	A DisplayString Object that uniquely identifies the trunk port based on its location in the system. The syntax for the Port Number is as follows: cabinet(1-22):carrier(A-E):slot(01-20).
g3ipinterface	1.3.6.1.4.1.6889.2.8.1.103
INT g3ipinterfaceTage	1.3.6.1.4.1.6889.2.8.1.103.1	INTEGER	read-only	The number of timeticks since the ip interface data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3ipinterfaceintvl object allows the Network Manager to determine the validity of the ip interface data in the cache and to control when the proxy agent extracts the ip interface data from the switch.
INT g3ipinterfaceTintvl	1.3.6.1.4.1.6889.2.8.1.103.2	INTEGER	read-write	An object containing the interval for which the ip interface data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for ip interface objects is received by the agent it uses the g3ipinterfaceage and g3ipinterfaceintvl objects to determine whether it should refresh the cached ipinterfaceTable. If g3ipinterfacestmp + g3ipinterfaceintvl is less than the current value of the sysUpTime object then the agent refreshes the ipinterfaceTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3ipinterfaceTdelay	1.3.6.1.4.1.6889.2.8.1.103.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data
INT g3ipinterfaceTretrieve	1.3.6.1.4.1.6889.2.8.1.103.4	INTEGER	read-write	An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
STR g3ipinterfaceNodeName1	1.3.6.1.4.1.6889.2.8.1.103.5	DisplayString	read-only	An object containing the the node-name for the ip interface
STR g3ipinterfaceNodeName2	1.3.6.1.4.1.6889.2.8.1.103.6	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName3	1.3.6.1.4.1.6889.2.8.1.103.7	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName4	1.3.6.1.4.1.6889.2.8.1.103.8	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName5	1.3.6.1.4.1.6889.2.8.1.103.9	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName6	1.3.6.1.4.1.6889.2.8.1.103.10	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName7	1.3.6.1.4.1.6889.2.8.1.103.11	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName8	1.3.6.1.4.1.6889.2.8.1.103.12	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName9	1.3.6.1.4.1.6889.2.8.1.103.13	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName10	1.3.6.1.4.1.6889.2.8.1.103.14	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName11	1.3.6.1.4.1.6889.2.8.1.103.15	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName12	1.3.6.1.4.1.6889.2.8.1.103.16	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName13	1.3.6.1.4.1.6889.2.8.1.103.17	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName14	1.3.6.1.4.1.6889.2.8.1.103.18	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName15	1.3.6.1.4.1.6889.2.8.1.103.19	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName16	1.3.6.1.4.1.6889.2.8.1.103.20	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName17	1.3.6.1.4.1.6889.2.8.1.103.21	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName18	1.3.6.1.4.1.6889.2.8.1.103.22	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName19	1.3.6.1.4.1.6889.2.8.1.103.23	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName20	1.3.6.1.4.1.6889.2.8.1.103.24	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName21	1.3.6.1.4.1.6889.2.8.1.103.25	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName22	1.3.6.1.4.1.6889.2.8.1.103.26	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName23	1.3.6.1.4.1.6889.2.8.1.103.27	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName24	1.3.6.1.4.1.6889.2.8.1.103.28	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName25	1.3.6.1.4.1.6889.2.8.1.103.29	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName26	1.3.6.1.4.1.6889.2.8.1.103.30	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName27	1.3.6.1.4.1.6889.2.8.1.103.31	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName28	1.3.6.1.4.1.6889.2.8.1.103.32	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName29	1.3.6.1.4.1.6889.2.8.1.103.33	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName30	1.3.6.1.4.1.6889.2.8.1.103.34	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName31	1.3.6.1.4.1.6889.2.8.1.103.35	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName32	1.3.6.1.4.1.6889.2.8.1.103.36	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName33	1.3.6.1.4.1.6889.2.8.1.103.37	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName34	1.3.6.1.4.1.6889.2.8.1.103.38	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName35	1.3.6.1.4.1.6889.2.8.1.103.39	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName36	1.3.6.1.4.1.6889.2.8.1.103.40	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName37	1.3.6.1.4.1.6889.2.8.1.103.41	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName38	1.3.6.1.4.1.6889.2.8.1.103.42	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName39	1.3.6.1.4.1.6889.2.8.1.103.43	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName40	1.3.6.1.4.1.6889.2.8.1.103.44	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName41	1.3.6.1.4.1.6889.2.8.1.103.45	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName42	1.3.6.1.4.1.6889.2.8.1.103.46	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName43	1.3.6.1.4.1.6889.2.8.1.103.47	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName44	1.3.6.1.4.1.6889.2.8.1.103.48	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName45	1.3.6.1.4.1.6889.2.8.1.103.49	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName46	1.3.6.1.4.1.6889.2.8.1.103.50	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName47	1.3.6.1.4.1.6889.2.8.1.103.51	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName48	1.3.6.1.4.1.6889.2.8.1.103.52	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName49	1.3.6.1.4.1.6889.2.8.1.103.53	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName50	1.3.6.1.4.1.6889.2.8.1.103.54	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName51	1.3.6.1.4.1.6889.2.8.1.103.55	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName52	1.3.6.1.4.1.6889.2.8.1.103.56	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName53	1.3.6.1.4.1.6889.2.8.1.103.57	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName54	1.3.6.1.4.1.6889.2.8.1.103.58	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName55	1.3.6.1.4.1.6889.2.8.1.103.59	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName56	1.3.6.1.4.1.6889.2.8.1.103.60	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName57	1.3.6.1.4.1.6889.2.8.1.103.61	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName58	1.3.6.1.4.1.6889.2.8.1.103.62	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName59	1.3.6.1.4.1.6889.2.8.1.103.63	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName60	1.3.6.1.4.1.6889.2.8.1.103.64	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName61	1.3.6.1.4.1.6889.2.8.1.103.65	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName62	1.3.6.1.4.1.6889.2.8.1.103.66	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName63	1.3.6.1.4.1.6889.2.8.1.103.67	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName64	1.3.6.1.4.1.6889.2.8.1.103.68	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName65	1.3.6.1.4.1.6889.2.8.1.103.69	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName66	1.3.6.1.4.1.6889.2.8.1.103.70	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName67	1.3.6.1.4.1.6889.2.8.1.103.71	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName68	1.3.6.1.4.1.6889.2.8.1.103.72	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName69	1.3.6.1.4.1.6889.2.8.1.103.73	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName70	1.3.6.1.4.1.6889.2.8.1.103.74	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName71	1.3.6.1.4.1.6889.2.8.1.103.75	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName72	1.3.6.1.4.1.6889.2.8.1.103.76	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName73	1.3.6.1.4.1.6889.2.8.1.103.77	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName74	1.3.6.1.4.1.6889.2.8.1.103.78	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName75	1.3.6.1.4.1.6889.2.8.1.103.79	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName76	1.3.6.1.4.1.6889.2.8.1.103.80	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName77	1.3.6.1.4.1.6889.2.8.1.103.81	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName78	1.3.6.1.4.1.6889.2.8.1.103.82	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName79	1.3.6.1.4.1.6889.2.8.1.103.83	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName80	1.3.6.1.4.1.6889.2.8.1.103.84	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName81	1.3.6.1.4.1.6889.2.8.1.103.85	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName82	1.3.6.1.4.1.6889.2.8.1.103.86	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName83	1.3.6.1.4.1.6889.2.8.1.103.87	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName84	1.3.6.1.4.1.6889.2.8.1.103.88	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceNodeName85	1.3.6.1.4.1.6889.2.8.1.103.89	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceNodeName1.
STR g3ipinterfaceSlot1	1.3.6.1.4.1.6889.2.8.1.103.90	DisplayString	read-only	An object containing the the VAL, CLAN or MEDPRO board slot number
STR g3ipinterfaceSlot2	1.3.6.1.4.1.6889.2.8.1.103.91	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot3	1.3.6.1.4.1.6889.2.8.1.103.92	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot4	1.3.6.1.4.1.6889.2.8.1.103.93	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot5	1.3.6.1.4.1.6889.2.8.1.103.94	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot6	1.3.6.1.4.1.6889.2.8.1.103.95	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot7	1.3.6.1.4.1.6889.2.8.1.103.96	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot8	1.3.6.1.4.1.6889.2.8.1.103.97	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot9	1.3.6.1.4.1.6889.2.8.1.103.98	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot10	1.3.6.1.4.1.6889.2.8.1.103.99	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot11	1.3.6.1.4.1.6889.2.8.1.103.100	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot12	1.3.6.1.4.1.6889.2.8.1.103.101	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot13	1.3.6.1.4.1.6889.2.8.1.103.102	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot14	1.3.6.1.4.1.6889.2.8.1.103.103	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot15	1.3.6.1.4.1.6889.2.8.1.103.104	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot16	1.3.6.1.4.1.6889.2.8.1.103.105	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot17	1.3.6.1.4.1.6889.2.8.1.103.106	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot18	1.3.6.1.4.1.6889.2.8.1.103.107	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot19	1.3.6.1.4.1.6889.2.8.1.103.108	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot20	1.3.6.1.4.1.6889.2.8.1.103.109	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot21	1.3.6.1.4.1.6889.2.8.1.103.110	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot22	1.3.6.1.4.1.6889.2.8.1.103.111	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot23	1.3.6.1.4.1.6889.2.8.1.103.112	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot24	1.3.6.1.4.1.6889.2.8.1.103.113	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot25	1.3.6.1.4.1.6889.2.8.1.103.114	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot26	1.3.6.1.4.1.6889.2.8.1.103.115	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot27	1.3.6.1.4.1.6889.2.8.1.103.116	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot28	1.3.6.1.4.1.6889.2.8.1.103.117	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot29	1.3.6.1.4.1.6889.2.8.1.103.118	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot30	1.3.6.1.4.1.6889.2.8.1.103.119	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot31	1.3.6.1.4.1.6889.2.8.1.103.120	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot32	1.3.6.1.4.1.6889.2.8.1.103.121	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot33	1.3.6.1.4.1.6889.2.8.1.103.122	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot34	1.3.6.1.4.1.6889.2.8.1.103.123	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot35	1.3.6.1.4.1.6889.2.8.1.103.124	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot36	1.3.6.1.4.1.6889.2.8.1.103.125	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot37	1.3.6.1.4.1.6889.2.8.1.103.126	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot38	1.3.6.1.4.1.6889.2.8.1.103.127	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot39	1.3.6.1.4.1.6889.2.8.1.103.128	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot40	1.3.6.1.4.1.6889.2.8.1.103.129	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot41	1.3.6.1.4.1.6889.2.8.1.103.130	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot42	1.3.6.1.4.1.6889.2.8.1.103.131	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot43	1.3.6.1.4.1.6889.2.8.1.103.132	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot44	1.3.6.1.4.1.6889.2.8.1.103.133	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot45	1.3.6.1.4.1.6889.2.8.1.103.134	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot46	1.3.6.1.4.1.6889.2.8.1.103.135	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot47	1.3.6.1.4.1.6889.2.8.1.103.136	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot48	1.3.6.1.4.1.6889.2.8.1.103.137	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot49	1.3.6.1.4.1.6889.2.8.1.103.138	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot50	1.3.6.1.4.1.6889.2.8.1.103.139	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot51	1.3.6.1.4.1.6889.2.8.1.103.140	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot52	1.3.6.1.4.1.6889.2.8.1.103.141	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot53	1.3.6.1.4.1.6889.2.8.1.103.142	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot54	1.3.6.1.4.1.6889.2.8.1.103.143	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot55	1.3.6.1.4.1.6889.2.8.1.103.144	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot56	1.3.6.1.4.1.6889.2.8.1.103.145	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot57	1.3.6.1.4.1.6889.2.8.1.103.146	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot58	1.3.6.1.4.1.6889.2.8.1.103.147	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot59	1.3.6.1.4.1.6889.2.8.1.103.148	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot60	1.3.6.1.4.1.6889.2.8.1.103.149	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot61	1.3.6.1.4.1.6889.2.8.1.103.150	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot62	1.3.6.1.4.1.6889.2.8.1.103.151	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot63	1.3.6.1.4.1.6889.2.8.1.103.152	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot64	1.3.6.1.4.1.6889.2.8.1.103.153	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot65	1.3.6.1.4.1.6889.2.8.1.103.154	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot66	1.3.6.1.4.1.6889.2.8.1.103.155	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot67	1.3.6.1.4.1.6889.2.8.1.103.156	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot68	1.3.6.1.4.1.6889.2.8.1.103.157	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot69	1.3.6.1.4.1.6889.2.8.1.103.158	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot70	1.3.6.1.4.1.6889.2.8.1.103.159	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot71	1.3.6.1.4.1.6889.2.8.1.103.160	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot72	1.3.6.1.4.1.6889.2.8.1.103.161	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot73	1.3.6.1.4.1.6889.2.8.1.103.162	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot74	1.3.6.1.4.1.6889.2.8.1.103.163	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot75	1.3.6.1.4.1.6889.2.8.1.103.164	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot76	1.3.6.1.4.1.6889.2.8.1.103.165	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot77	1.3.6.1.4.1.6889.2.8.1.103.166	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot78	1.3.6.1.4.1.6889.2.8.1.103.167	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot79	1.3.6.1.4.1.6889.2.8.1.103.168	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot80	1.3.6.1.4.1.6889.2.8.1.103.169	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot81	1.3.6.1.4.1.6889.2.8.1.103.170	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot82	1.3.6.1.4.1.6889.2.8.1.103.171	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot83	1.3.6.1.4.1.6889.2.8.1.103.172	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot84	1.3.6.1.4.1.6889.2.8.1.103.173	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
STR g3ipinterfaceSlot85	1.3.6.1.4.1.6889.2.8.1.103.174	DisplayString	read-only	See DESCRIPTION of g3ipinterfaceSlot1.
g3gateway	1.3.6.1.4.1.6889.2.8.1.104
INT g3gatewayTage	1.3.6.1.4.1.6889.2.8.1.104.1	INTEGER	read-only	The number of timeticks since the gateway data was last extracted from the switch by the Proxy Agent. This object along with the g3gatewayintvl object allows the Network Manager to determine the validity of the gateway data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3gatewayTintvl	1.3.6.1.4.1.6889.2.8.1.104.2	INTEGER	read-write	An object containing the interval for which the gateway data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these gateway objects is received by the agent it uses the g3gatewayage and g3gatewayintvl objects to determine whether it should refresh the cached gatewayTable. If g3gatewaystmp + g3gatewayintvl is less than the current value of the sysUpTime object then the agent refreshes the gatewayTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3gatewayTdelay	1.3.6.1.4.1.6889.2.8.1.104.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3gatewayTretrieve	1.3.6.1.4.1.6889.2.8.1.104.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3gatewayTcount	1.3.6.1.4.1.6889.2.8.1.104.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3gatewayTable	1.3.6.1.4.1.6889.2.8.1.104.6		not-accessible	A list of g3gateway entries.
g3gatewayEntry	1.3.6.1.4.1.6889.2.8.1.104.6.1		not-accessible	A g3gateway entry containing objects of the g3gateway information sent by the switch.
INT g3gatewayNumber	1.3.6.1.4.1.6889.2.8.1.104.6.1.1	INTEGER	read-only	An object containing the Media Gateway number
STR g3gatewayName	1.3.6.1.4.1.6889.2.8.1.104.6.1.2	DisplayString	read-only	An object containing the Media Gateway name
STR g3gatewayIdentifier	1.3.6.1.4.1.6889.2.8.1.104.6.1.3	DisplayString	read-only	An object containing the Media Gateway identifier (either the serial number or other alpha-numeric characters for identification)
STR g3gatewayIPAddress	1.3.6.1.4.1.6889.2.8.1.104.6.1.4	DisplayString	read-only	An object containing the IP adrress of the Media Gateway
STR g3gatewayMACAddress	1.3.6.1.4.1.6889.2.8.1.104.6.1.5	DisplayString	read-only	An object containing the MAC address of the Media Gateway
INT g3gatewayRegion	1.3.6.1.4.1.6889.2.8.1.104.6.1.6	INTEGER	read-only	An object containing the network region for the Media Gateway
STR g3gatewayLocation	1.3.6.1.4.1.6889.2.8.1.104.6.1.7	DisplayString	read-only	An object containing information about time-zone offset, daylight savings rule and number plan area code.
STR g3gatewaySiteData1	1.3.6.1.4.1.6889.2.8.1.104.6.1.8	DisplayString	read-only	An object containing general site information
STR g3gatewaySiteData2	1.3.6.1.4.1.6889.2.8.1.104.6.1.9	DisplayString	read-only	An object containing general site information
STR g3gatewayG700ModTypeV1	1.3.6.1.4.1.6889.2.8.1.104.6.1.10	DisplayString	read-only	An object containing the hardware contained in the G700 media module slot V1 (if any).
STR g3gatewayG700ModTypeV2	1.3.6.1.4.1.6889.2.8.1.104.6.1.11	DisplayString	read-only	An object containing the hardware contained in the G700 media module slot V2 (if any).
STR g3gatewayG700ModTypeV3	1.3.6.1.4.1.6889.2.8.1.104.6.1.12	DisplayString	read-only	An object containing the hardware contained in the G700 media module slot V3 (if any).
STR g3gatewayG700ModTypeV4	1.3.6.1.4.1.6889.2.8.1.104.6.1.13	DisplayString	read-only	An object containing the hardware contained in the G700 media module slot V4 (if any).
STR g3gatewayG700ModTypeV8	1.3.6.1.4.1.6889.2.8.1.104.6.1.14	DisplayString	read-only	An object containing the hardware contained in the G700 media module slot V8 (if any).
STR g3gatewayG700ModTypeV9	1.3.6.1.4.1.6889.2.8.1.104.6.1.15	DisplayString	read-only	An object containing the hardware contained in the G700 media module slot V9 (if any).
STR g3gatewayRegistered	1.3.6.1.4.1.6889.2.8.1.104.6.1.16	DisplayString	read-only	An object containing information about whether a Media Gateway is registered with a communications controller.
STR g3gatewayType	1.3.6.1.4.1.6889.2.8.1.104.6.1.17	DisplayString	read-only	An object containing the type of media gateway (G700 or G350).
STR g3gatewayFWVintage	1.3.6.1.4.1.6889.2.8.1.104.6.1.18	DisplayString	read-only	An object containing the firmware version of the media gateway processor (for G700) or the single firmware image on the motherboard (for G350). This value may not be available on a G700 with older firmware and is only available if the media gateway is registered. The object contains a set of three numbers in the format xxx.xxx.xxx.
STR g3gatewayHWVintage	1.3.6.1.4.1.6889.2.8.1.104.6.1.19	DisplayString	read-only	An object containing the hardware version of the media gateway. This value may not be available for a G700 with older firmware and is only available if th media gateway is registered.
STR g3gatewayNearEndIP	1.3.6.1.4.1.6889.2.8.1.104.6.1.20	DisplayString	read-only	An object containing the IP address of the CLAN or S8300 to which the media gateway is registered.
STR g3gatewayEncrypt	1.3.6.1.4.1.6889.2.8.1.104.6.1.21	DisplayString	read-only	An object indicating whether or not the media gateway is using encryption (y or n).
STR g3gatewayG350ModTypeV1	1.3.6.1.4.1.6889.2.8.1.104.6.1.22	DisplayString	read-only	An object containing the hardware contained in the G350 media module slot V1 (if any).
STR g3gatewayG350ModTypeV2	1.3.6.1.4.1.6889.2.8.1.104.6.1.23	DisplayString	read-only	An object containing the hardware contained in the G350 media module slot V2 (if any).
STR g3gatewayG350ModTypeV3	1.3.6.1.4.1.6889.2.8.1.104.6.1.24	DisplayString	read-only	An object containing the hardware contained in the G350 media module slot V3 (if any).
STR g3gatewayG350ModTypeV4	1.3.6.1.4.1.6889.2.8.1.104.6.1.25	DisplayString	read-only	An object containing the hardware contained in the G350 media module slot V4 (if any).
STR g3gatewayG350ModTypeV5	1.3.6.1.4.1.6889.2.8.1.104.6.1.26	DisplayString	read-only	An object containing the hardware contained in the G350 media module slot V5 (if any).
STR g3gatewayG350ModTypeV6	1.3.6.1.4.1.6889.2.8.1.104.6.1.27	DisplayString	read-only	An object containing the hardware contained in the G350 media module slot V6 (if any).
STR g3gatewayG350ModTypeV7	1.3.6.1.4.1.6889.2.8.1.104.6.1.28	DisplayString	read-only	An object containing the hardware contained in the G350 media module slot V7 (if any).
STR g3gatewayG350ModTypeV9	1.3.6.1.4.1.6889.2.8.1.104.6.1.29	DisplayString	read-only	An object containing the hardware contained in the G350 media module slot V9 (if any).
STR g3gatewayRecoveryRule	1.3.6.1.4.1.6889.2.8.1.104.6.1.30	DisplayString	read-only	An object containing the recovery rule that is to be used by this media gateway for auto fail back to primary; acceptable values are 1-250 or none; the default is none.
g3mediacfg	1.3.6.1.4.1.6889.2.8.1.105
INT g3mediacfgTage	1.3.6.1.4.1.6889.2.8.1.105.1	INTEGER	read-only	The number of timeticks since the media config data was extracted from the switch by the G3 Proxy Agent. This object along with the g3mediacfgTintvl object allows the Network Manager to determine the validity of the media config data in the cache and to control when the proxy agent extracts the media config data from the switch.
INT g3mediacfgTintvl	1.3.6.1.4.1.6889.2.8.1.105.2	INTEGER	read-write	An object containing the interval for which the media config data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for media config objects is received by the agent it uses the g3mediacfgTage and g3mediacfgTintvl objects to determine whether it should refresh the cached mediacfgTable. If g3mediacfgTstmp + g3mediacfgTintvl is less than the current value of the sysUpTime object then the agent refreshes the mediacfgTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3mediacfgTdelay	1.3.6.1.4.1.6889.2.8.1.105.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data
INT g3mediacfgTretrieve	1.3.6.1.4.1.6889.2.8.1.105.4	INTEGER	read-write	An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3mediacfgTcount	1.3.6.1.4.1.6889.2.8.1.105.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3mediacfgTable	1.3.6.1.4.1.6889.2.8.1.105.6		not-accessible	A list of g3mediacfg entries.
g3mediacfgEntry	1.3.6.1.4.1.6889.2.8.1.105.6.1		not-accessible	A g3mediacfg entry containing objects of the g3mediacfg information sent by the switch.
STR g3mediacfgBoardNum	1.3.6.1.4.1.6889.2.8.1.105.6.1.1	DisplayString	read-only	A DisplayString Object that uniquely identifies a station board based on its location in the system. The syntax for the Board Number is as follows: cabinet(01-44):carrier(A-E):slot(01-20).
STR g3mediacfgBoardType	1.3.6.1.4.1.6889.2.8.1.105.6.1.2	DisplayString	read-only	A DisplayString Object that contains a text description of the type of media gateway board.
STR g3mediacfgCode	1.3.6.1.4.1.6889.2.8.1.105.6.1.3	DisplayString	read-only	A DisplayString Object that contains the code that defines the type of media gateway board.
STR g3mediacfgVintage	1.3.6.1.4.1.6889.2.8.1.105.6.1.4	DisplayString	read-only	A DisplayString Object that contains the vintage of the media gateway board.
STR g3mediacfgSuffix	1.3.6.1.4.1.6889.2.8.1.105.6.1.5	DisplayString	read-only	A DisplayString Object that contains the suffix to the code
g3stamedia	1.3.6.1.4.1.6889.2.8.1.106
INT g3stamediaTage	1.3.6.1.4.1.6889.2.8.1.106.1	INTEGER	read-only	The number of timeticks since the media gateway status data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3stamediaintvl object allows the Network Manager to determine the validity of the media gateway status data in the cache and to control when the proxy agent extracts the media gateway status data from the switch.
INT g3stamediaTintvl	1.3.6.1.4.1.6889.2.8.1.106.2	INTEGER	read-write	An object containing the interval for which the media gateway data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for media gateway objects is received by the agent it uses the g3stamediaage and g3stamediaintvl objects to determine whether it should refresh the cached stamediaTable. If g3stamediastmp + g3stamediaintvl is less than the current value of the sysUpTime object then the agent refreshes the stamediaTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3stamediaTdelay	1.3.6.1.4.1.6889.2.8.1.106.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data
INT g3stamediaTretrieve	1.3.6.1.4.1.6889.2.8.1.106.4	INTEGER	read-write	An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
INT g3stamediaAlarmMajor	1.3.6.1.4.1.6889.2.8.1.106.5	INTEGER	read-only	An object containing the total number of major alarms existing on the media gateways administered in the system.
INT g3stamediaAlarmMinor	1.3.6.1.4.1.6889.2.8.1.106.6	INTEGER	read-only	An object containing the total number of minor alarms existing on the media gateways administered in the system.
INT g3stamediaAlarmWarning	1.3.6.1.4.1.6889.2.8.1.106.7	INTEGER	read-only	An object containing the total number of warnings existing on the media gateways administered in a system.
INT g3stamediaBusyOutTrunks	1.3.6.1.4.1.6889.2.8.1.106.8	INTEGER	read-only	An object containing the total number of busied out trunks existing on the media gateways administered in the system.
INT g3stamediaBusyOutStations	1.3.6.1.4.1.6889.2.8.1.106.9	INTEGER	read-only	An object containing the total number of busied out stations existing on the media gateways administered in the system.
INT g3stamediaH248LinksDown	1.3.6.1.4.1.6889.2.8.1.106.10	INTEGER	read-only	An object containing the total number of media gateways administered in a system that do not have a H.248 link established to the media gateway controller.
INT g3stamediaH248LinksUp	1.3.6.1.4.1.6889.2.8.1.106.11	INTEGER	read-only	An object containing the total number of media gateways administered in a system that do have a H.248 link established to the media gateway controller.
INT g3stamediaNbrLogins	1.3.6.1.4.1.6889.2.8.1.106.12	INTEGER	read-only	An object containing the total number of logins into the system.
STR g3stamediaGatewayStatus1	1.3.6.1.4.1.6889.2.8.1.106.13	DisplayString	read-only	An object containing the status of the first set of eight media gateways, including the number of major alarms, minor alarms, warnings, and the H.248 link status for each specific media gateway number.
STR g3stamediaGatewayStatus2	1.3.6.1.4.1.6889.2.8.1.106.14	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus1.
STR g3stamediaGatewayStatus3	1.3.6.1.4.1.6889.2.8.1.106.15	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus1.
STR g3stamediaGatewayStatus4	1.3.6.1.4.1.6889.2.8.1.106.16	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus1.
STR g3stamediaGatewayStatus5	1.3.6.1.4.1.6889.2.8.1.106.17	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus1.
STR g3stamediaGatewayStatus6	1.3.6.1.4.1.6889.2.8.1.106.18	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus1.
STR g3stamediaGatewayStatus7	1.3.6.1.4.1.6889.2.8.1.106.19	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus1.
STR g3stamediaGatewayStatus8	1.3.6.1.4.1.6889.2.8.1.106.20	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus1.
STR g3stamediaGatewayStatus9	1.3.6.1.4.1.6889.2.8.1.106.21	DisplayString	read-only	An object containing the status of the second set of eight media gateways, including the number of major alarms, minor alarms, warnings, and the H.248 link status for each specific media gateway number.
STR g3stamediaGatewayStatus10	1.3.6.1.4.1.6889.2.8.1.106.22	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus9.
STR g3stamediaGatewayStatus11	1.3.6.1.4.1.6889.2.8.1.106.23	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus9.
STR g3stamediaGatewayStatus12	1.3.6.1.4.1.6889.2.8.1.106.24	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus9.
STR g3stamediaGatewayStatus13	1.3.6.1.4.1.6889.2.8.1.106.25	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus9.
STR g3stamediaGatewayStatus14	1.3.6.1.4.1.6889.2.8.1.106.26	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus9.
STR g3stamediaGatewayStatus15	1.3.6.1.4.1.6889.2.8.1.106.27	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus9.
STR g3stamediaGatewayStatus16	1.3.6.1.4.1.6889.2.8.1.106.28	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus9.
STR g3stamediaGatewayStatus17	1.3.6.1.4.1.6889.2.8.1.106.29	DisplayString	read-only	An object containing the status of the third set of eight media gateways, including the number of major alarms, minor alarms, warnings, and the H.248 link status for each specific media gateway number.
STR g3stamediaGatewayStatus18	1.3.6.1.4.1.6889.2.8.1.106.30	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus17.
STR g3stamediaGatewayStatus19	1.3.6.1.4.1.6889.2.8.1.106.31	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus17.
STR g3stamediaGatewayStatus20	1.3.6.1.4.1.6889.2.8.1.106.32	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus17.
STR g3stamediaGatewayStatus21	1.3.6.1.4.1.6889.2.8.1.106.33	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus17.
STR g3stamediaGatewayStatus22	1.3.6.1.4.1.6889.2.8.1.106.34	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus17.
STR g3stamediaGatewayStatus23	1.3.6.1.4.1.6889.2.8.1.106.35	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus17.
STR g3stamediaGatewayStatus24	1.3.6.1.4.1.6889.2.8.1.106.36	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus17.
STR g3stamediaGatewayStatus25	1.3.6.1.4.1.6889.2.8.1.106.37	DisplayString	read-only	An object containing the status of the fourth set of eight media gateways, including the number of major alarms, minor alarms, warnings, and the H.248 link status for each specific media gateway number.
STR g3stamediaGatewayStatus26	1.3.6.1.4.1.6889.2.8.1.106.38	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus25.
STR g3stamediaGatewayStatus27	1.3.6.1.4.1.6889.2.8.1.106.39	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus25.
STR g3stamediaGatewayStatus28	1.3.6.1.4.1.6889.2.8.1.106.40	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus25.
STR g3stamediaGatewayStatus29	1.3.6.1.4.1.6889.2.8.1.106.41	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus25.
STR g3stamediaGatewayStatus30	1.3.6.1.4.1.6889.2.8.1.106.42	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus25.
STR g3stamediaGatewayStatus31	1.3.6.1.4.1.6889.2.8.1.106.43	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus25.
STR g3stamediaGatewayStatus32	1.3.6.1.4.1.6889.2.8.1.106.44	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus25.
STR g3stamediaGatewayStatus33	1.3.6.1.4.1.6889.2.8.1.106.45	DisplayString	read-only	An object containing the status of the fifth set of eight media gateways, including the number of major alarms, minor alarms, warnings, and the H.248 link status for each specific media gateway number.
STR g3stamediaGatewayStatus34	1.3.6.1.4.1.6889.2.8.1.106.46	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus33.
STR g3stamediaGatewayStatus35	1.3.6.1.4.1.6889.2.8.1.106.47	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus33.
STR g3stamediaGatewayStatus36	1.3.6.1.4.1.6889.2.8.1.106.48	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus33.
STR g3stamediaGatewayStatus37	1.3.6.1.4.1.6889.2.8.1.106.49	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus33.
STR g3stamediaGatewayStatus38	1.3.6.1.4.1.6889.2.8.1.106.50	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus33.
STR g3stamediaGatewayStatus39	1.3.6.1.4.1.6889.2.8.1.106.51	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus33.
STR g3stamediaGatewayStatus40	1.3.6.1.4.1.6889.2.8.1.106.52	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus33.
STR g3stamediaGatewayStatus41	1.3.6.1.4.1.6889.2.8.1.106.53	DisplayString	read-only	An object containing the status of the sixth set of eight media gateways, including the number of major alarms, minor alarms, warnings, and the H.248 link status for each specific media gateway number.
STR g3stamediaGatewayStatus42	1.3.6.1.4.1.6889.2.8.1.106.54	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus41.
STR g3stamediaGatewayStatus43	1.3.6.1.4.1.6889.2.8.1.106.55	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus41.
STR g3stamediaGatewayStatus44	1.3.6.1.4.1.6889.2.8.1.106.56	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus41.
STR g3stamediaGatewayStatus45	1.3.6.1.4.1.6889.2.8.1.106.57	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus41.
STR g3stamediaGatewayStatus46	1.3.6.1.4.1.6889.2.8.1.106.58	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus41.
STR g3stamediaGatewayStatus47	1.3.6.1.4.1.6889.2.8.1.106.59	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus41.
STR g3stamediaGatewayStatus48	1.3.6.1.4.1.6889.2.8.1.106.60	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus41.
STR g3stamediaGatewayStatus49	1.3.6.1.4.1.6889.2.8.1.106.61	DisplayString	read-only	An object containing the status of the seventh set of eight media gateways, including the number of major alarms, minor alarms, warnings, and the H.248 link status for each specific media gateway number.
STR g3stamediaGatewayStatus50	1.3.6.1.4.1.6889.2.8.1.106.62	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus49.
STR g3stamediaGatewayStatus51	1.3.6.1.4.1.6889.2.8.1.106.63	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus49.
STR g3stamediaGatewayStatus52	1.3.6.1.4.1.6889.2.8.1.106.64	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus49.
STR g3stamediaGatewayStatus53	1.3.6.1.4.1.6889.2.8.1.106.65	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus49.
STR g3stamediaGatewayStatus54	1.3.6.1.4.1.6889.2.8.1.106.66	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus49.
STR g3stamediaGatewayStatus55	1.3.6.1.4.1.6889.2.8.1.106.67	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus49.
STR g3stamediaGatewayStatus56	1.3.6.1.4.1.6889.2.8.1.106.68	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus49.
STR g3stamediaGatewayStatus57	1.3.6.1.4.1.6889.2.8.1.106.69	DisplayString	read-only	An object containing the status of the eighth set of eight media gateways, including the number of major alarms, minor alarms, warnings, and the H.248 link status for each specific media gateway number.
STR g3stamediaGatewayStatus58	1.3.6.1.4.1.6889.2.8.1.106.70	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus57.
STR g3stamediaGatewayStatus59	1.3.6.1.4.1.6889.2.8.1.106.71	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus57.
STR g3stamediaGatewayStatus60	1.3.6.1.4.1.6889.2.8.1.106.72	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus57.
STR g3stamediaGatewayStatus61	1.3.6.1.4.1.6889.2.8.1.106.73	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus57.
STR g3stamediaGatewayStatus62	1.3.6.1.4.1.6889.2.8.1.106.74	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus57.
STR g3stamediaGatewayStatus63	1.3.6.1.4.1.6889.2.8.1.106.75	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus57.
STR g3stamediaGatewayStatus64	1.3.6.1.4.1.6889.2.8.1.106.76	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus57.
STR g3stamediaGatewayStatus65	1.3.6.1.4.1.6889.2.8.1.106.77	DisplayString	read-only	An object containing the status of the ninth set of eight media gateways, including the number of major alarms, minor alarms, warnings, and the H.248 link status for each specific media gateway number.
STR g3stamediaGatewayStatus66	1.3.6.1.4.1.6889.2.8.1.106.78	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus65.
STR g3stamediaGatewayStatus67	1.3.6.1.4.1.6889.2.8.1.106.79	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus65.
STR g3stamediaGatewayStatus68	1.3.6.1.4.1.6889.2.8.1.106.80	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus65.
STR g3stamediaGatewayStatus69	1.3.6.1.4.1.6889.2.8.1.106.81	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus65.
STR g3stamediaGatewayStatus70	1.3.6.1.4.1.6889.2.8.1.106.82	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus65.
STR g3stamediaGatewayStatus71	1.3.6.1.4.1.6889.2.8.1.106.83	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus65.
STR g3stamediaGatewayStatus72	1.3.6.1.4.1.6889.2.8.1.106.84	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus65.
STR g3stamediaGatewayStatus73	1.3.6.1.4.1.6889.2.8.1.106.85	DisplayString	read-only	An object containing the status of the tenth set of eight media gateways, including the number of major alarms, minor alarms, warnings, and the H.248 link status for each specific media gateway number.
STR g3stamediaGatewayStatus74	1.3.6.1.4.1.6889.2.8.1.106.86	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus73.
STR g3stamediaGatewayStatus75	1.3.6.1.4.1.6889.2.8.1.106.87	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus73.
STR g3stamediaGatewayStatus76	1.3.6.1.4.1.6889.2.8.1.106.88	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus73.
STR g3stamediaGatewayStatus77	1.3.6.1.4.1.6889.2.8.1.106.89	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus73.
STR g3stamediaGatewayStatus78	1.3.6.1.4.1.6889.2.8.1.106.90	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus73.
STR g3stamediaGatewayStatus79	1.3.6.1.4.1.6889.2.8.1.106.91	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus73.
STR g3stamediaGatewayStatus80	1.3.6.1.4.1.6889.2.8.1.106.92	DisplayString	read-only	See DESCRIPTION of g3stamediaGatewayStatus73.
g3stamgann	1.3.6.1.4.1.6889.2.8.1.107
INT g3stamgannTage	1.3.6.1.4.1.6889.2.8.1.107.1	INTEGER	read-only	The number of timeticks since the mg-announcment data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3stamgannintvl object allows the Network Manager to determine the validity of the mg-announcement data in the cache and to control when the proxy agent extracts the mg-announcement data from the switch.
INT g3stamgannTintvl	1.3.6.1.4.1.6889.2.8.1.107.2	INTEGER	read-write	An object containing the interval for which the mg-announcement data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for mg-announcement objects is received by the agent it uses the g3stamgannage and g3stamgannintvl objects to determine whether it should refresh the cached stamgannTable. If g3stamgannstmp + g3stamgannintvl is less than the current value of the sysUpTime object then the agent refreshes the stamgannTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3stamgannTdelay	1.3.6.1.4.1.6889.2.8.1.107.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data
INT g3stamgannTretrieve	1.3.6.1.4.1.6889.2.8.1.107.4	INTEGER	read-write	An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3stamgannTcount	1.3.6.1.4.1.6889.2.8.1.107.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3stamgannTable	1.3.6.1.4.1.6889.2.8.1.107.6		not-accessible	A list of g3stamgann entries.
g3stamgannEntry	1.3.6.1.4.1.6889.2.8.1.107.6.1		not-accessible	A g3stamgann entry containing objects of the g3stamgann information sent by the switch.
INT g3stamgannGatewayNbr	1.3.6.1.4.1.6889.2.8.1.107.6.1.1	INTEGER	read-only	An object containing the media gateway number of a G700 media gateway that has the virtual VAL board administered in the V9 slot.
STR g3stamgannAnnActive	1.3.6.1.4.1.6889.2.8.1.107.6.1.2	DisplayString	read-only	An object containing the status of the administered virtual VAL board functionality in the Auser maintenance table. The status is active, either yes or no.
g3ipserver	1.3.6.1.4.1.6889.2.8.1.108
INT g3ipserverTage	1.3.6.1.4.1.6889.2.8.1.108.1	INTEGER	read-only	The number of timeticks since the data was last extracted from the switch by the Proxy Agent. This object along with the g3gatewayTintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3ipserverTintvl	1.3.6.1.4.1.6889.2.8.1.108.2	INTEGER	read-write	An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these data objects is received by the agent it uses the g3gatewayTage and g3gatewayTintvl objects to determine whether it should refresh the cached gatewayTable. If g3gatewayTstmp + g3gatewayTintvl is less than the current value of the sysUpTime object then the agent refreshes the gatewayTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3ipserverTdelay	1.3.6.1.4.1.6889.2.8.1.108.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3ipserverTretrieve	1.3.6.1.4.1.6889.2.8.1.108.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3ipserverTcount	1.3.6.1.4.1.6889.2.8.1.108.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3ipserverTable	1.3.6.1.4.1.6889.2.8.1.108.6		not-accessible	A list of g3ipserver entries.
g3ipserverEntry	1.3.6.1.4.1.6889.2.8.1.108.6.1		not-accessible	A g3ipserver entry containing objects of the g3ipserver information sent by the switch.
INT g3ipserverPortNetwork	1.3.6.1.4.1.6889.2.8.1.108.6.1.1	INTEGER	read-only	An object containing the port network number where the ipserver interfaces are inserted
STR g3ipserverSocketEncr	1.3.6.1.4.1.6889.2.8.1.108.6.1.2	DisplayString	read-only	An object containing the state of socket encryption for the Server Interface Module (SIM) interface between the server and the IPSI board. Values are y(es) and n(o) for enabling/disabling socket encryption.
STR g3ipserverSecServer	1.3.6.1.4.1.6889.2.8.1.108.6.1.3	DisplayString	read-only	An object containing an indicator as to whether or not a duplicated (secondary) ipserver interface (IPSI) board is administered within a port network.
STR g3ipserverPrimLocation	1.3.6.1.4.1.6889.2.8.1.108.6.1.4	DisplayString	read-only	An object containing the IPSI A Board Location
STR g3ipserverPrimHost	1.3.6.1.4.1.6889.2.8.1.108.6.1.5	DisplayString	read-only	An object containing the IPSI A host name
STR g3ipserverPrimDHCPID	1.3.6.1.4.1.6889.2.8.1.108.6.1.6	DisplayString	read-only	An object containing the IPSI A DHCP ID
STR g3ipserverPrimIP1	1.3.6.1.4.1.6889.2.8.1.108.6.1.7	DisplayString	read-only	An object containing the IPSI A IP address - segment 1
STR g3ipserverPrimIP2	1.3.6.1.4.1.6889.2.8.1.108.6.1.8	DisplayString	read-only	An object containing the IPSI A IP address - segment 2
STR g3ipserverPrimIP3	1.3.6.1.4.1.6889.2.8.1.108.6.1.9	DisplayString	read-only	An object containing the IPSI A IP address - segment 3
STR g3ipserverPrimIP4	1.3.6.1.4.1.6889.2.8.1.108.6.1.10	DisplayString	read-only	An object containing the IPSI A IP address - segment 4
STR g3ipserverPrimIPPort	1.3.6.1.4.1.6889.2.8.1.108.6.1.11	DisplayString	read-only	An object containing the IPSI A IP port number
STR g3ipserverPrimServState	1.3.6.1.4.1.6889.2.8.1.108.6.1.12	DisplayString	read-only	An object containing the IPSI A Service State
STR g3ipserverPrimCntlState	1.3.6.1.4.1.6889.2.8.1.108.6.1.13	DisplayString	read-only	An object containing the IPSI A Control State
STR g3ipserverPrimStHealth	1.3.6.1.4.1.6889.2.8.1.108.6.1.14	DisplayString	read-only	An object containing the IPSI A State Of Health
STR g3ipserverSecLocation	1.3.6.1.4.1.6889.2.8.1.108.6.1.15	DisplayString	read-only	An object containing the IPSI B Board Location
STR g3ipserverSecHost	1.3.6.1.4.1.6889.2.8.1.108.6.1.16	DisplayString	read-only	An object containing the IPSI B Host Name
STR g3ipserverSecDHCPID	1.3.6.1.4.1.6889.2.8.1.108.6.1.17	DisplayString	read-only	An object containing the IPSI B DCHP ID
STR g3ipserverSecIP1	1.3.6.1.4.1.6889.2.8.1.108.6.1.18	DisplayString	read-only	An object containing the IPSI B IP Address - segment 1
STR g3ipserverSecIP2	1.3.6.1.4.1.6889.2.8.1.108.6.1.19	DisplayString	read-only	An object containing the IPSI B IP Address - segment 2
STR g3ipserverSecIP3	1.3.6.1.4.1.6889.2.8.1.108.6.1.20	DisplayString	read-only	An object containing the IPSI B IP Address - segment 3
STR g3ipserverSecIP4	1.3.6.1.4.1.6889.2.8.1.108.6.1.21	DisplayString	read-only	An object containing the IPSI B IP Address - segment 4
STR g3ipserverSecIPPort	1.3.6.1.4.1.6889.2.8.1.108.6.1.22	DisplayString	read-only	An object containing the IPSI B IP port number
STR g3ipserverSecServState	1.3.6.1.4.1.6889.2.8.1.108.6.1.23	DisplayString	read-only	An object containing the IPSI B Service State
STR g3ipserverSecCntlState	1.3.6.1.4.1.6889.2.8.1.108.6.1.24	DisplayString	read-only	An object containing the IPSI B Control State
STR g3ipserverSecStHealth	1.3.6.1.4.1.6889.2.8.1.108.6.1.25	DisplayString	read-only	An object containing the IPSI B State Of Health
STR g3ipserverCallCntl802	1.3.6.1.4.1.6889.2.8.1.108.6.1.26	DisplayString	read-only	An object containing the call control (signaling) 802.1p value for the IPSI board. Default is 6, with a range of 0 to 7.
STR g3ipserverCallCntlDiff	1.3.6.1.4.1.6889.2.8.1.108.6.1.27	DisplayString	read-only	An object containing the call control (signaling) DiffServ value for the IPSI board. Default is 40, with a range of 0 to 63.
g3regipstat	1.3.6.1.4.1.6889.2.8.1.109
INT g3regipstatTage	1.3.6.1.4.1.6889.2.8.1.109.1	INTEGER	read-only	The number of timeticks since the registered ip stations data was last extracted from the switch by the Proxy Agent. This object along with the g3regipstatintvl object allows the Network Manager to determine the validity of the registered ip stations data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3regipstatTintvl	1.3.6.1.4.1.6889.2.8.1.109.2	INTEGER	read-write	An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these registered ip stations data objects is received by the agent it uses the g3regipstatage and g3regipstatintvl objects to determine whether it should refresh the cached regipstatTable. If g3regipstatstmp + g3regipstatintvl is less than the current value of the sysUpTime object then the agent refreshes the regipstatTable cache. In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3regipstatTdelay	1.3.6.1.4.1.6889.2.8.1.109.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3regipstatTretrieve	1.3.6.1.4.1.6889.2.8.1.109.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
GAU g3regipstatTcount	1.3.6.1.4.1.6889.2.8.1.109.5	Gauge	read-only	A Gauge object containing the number of data records in the cache.
g3regipstatTable	1.3.6.1.4.1.6889.2.8.1.109.6		not-accessible	A list of g3regipstat entries.
g3regipstatEntry	1.3.6.1.4.1.6889.2.8.1.109.6.1		not-accessible	A g3regipstat entry containing objects of the g3regipstat information sent by the switch.
STR g3regipstatExtension	1.3.6.1.4.1.6889.2.8.1.109.6.1.1	DisplayString	read-only	An object containing the registered IP station extension.
g3callratedata	1.3.6.1.4.1.6889.2.8.1.110
INT g3callratedataTage	1.3.6.1.4.1.6889.2.8.1.110.1	INTEGER	read-only	The number of timeticks since the call rate data was last extracted from the switch by the Proxy Agent. This object along with the g3callratedataTintvl object allows the Network Manager to determine the validity of the call rate data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3callratedataTintvl	1.3.6.1.4.1.6889.2.8.1.110.2	INTEGER	read-write	An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these call rate data objects is received by the agent it uses the g3callratedataTage and g3callratedataTintvl objects to determine whether it should refresh the cached callratedataTable. If g3callratedataTstmp + g3callratedataTintvl is less than the current value of the sysUpTime object then the agent refreshes the callratedataTable cache.In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3callratedataTdelay	1.3.6.1.4.1.6889.2.8.1.110.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3callratedataTretrieve	1.3.6.1.4.1.6889.2.8.1.110.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
INT g3callratedataRunYear	1.3.6.1.4.1.6889.2.8.1.110.5	INTEGER	read-only	An object containing the Year the command was executed
INT g3callratedataRunMonth	1.3.6.1.4.1.6889.2.8.1.110.6	INTEGER	read-only	An object containing the Month the command was executed
INT g3callratedataRunDay	1.3.6.1.4.1.6889.2.8.1.110.7	INTEGER	read-only	An object containing the Day the command was executed
INT g3callratedataRunHour	1.3.6.1.4.1.6889.2.8.1.110.8	INTEGER	read-only	An object containing the Hour the command was executed
STR g3callratedataMeasHour	1.3.6.1.4.1.6889.2.8.1.110.9	DisplayString	read-only	An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded
STR g3callratedataNumCalls	1.3.6.1.4.1.6889.2.8.1.110.10	DisplayString	read-only	The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour.
STR g3callratedataBsyIntHr	1.3.6.1.4.1.6889.2.8.1.110.11	DisplayString	read-only	An object containing
STR g3callratedataBsyIntMn	1.3.6.1.4.1.6889.2.8.1.110.12	DisplayString	read-only	An object containing
STR g3callratedataBsyIntSc	1.3.6.1.4.1.6889.2.8.1.110.13	DisplayString	read-only	An object containing
STR g3callratedataBsyCalCmpl	1.3.6.1.4.1.6889.2.8.1.110.14	DisplayString	read-only	An object containing the total number of calls completed in the listed busy interval.
STR g3callratedataMeasHour2	1.3.6.1.4.1.6889.2.8.1.110.15	DisplayString	read-only	An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded.
STR g3callratedataNumCallsToday	1.3.6.1.4.1.6889.2.8.1.110.16	DisplayString	read-only	The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour
STR g3callratedataBsyIntHrToday	1.3.6.1.4.1.6889.2.8.1.110.17	DisplayString	read-only	An object containing today's busiest hour.This is the hour with the largest number of completed calls
STR g3callratedataBsyIntMnToday	1.3.6.1.4.1.6889.2.8.1.110.18	DisplayString	read-only	An object containing the minute field of today's busiest hour
STR g3callratedataBsyIntScToday	1.3.6.1.4.1.6889.2.8.1.110.19	DisplayString	read-only	An object containing the second field of today's busiest hour
STR g3callratedataBsyCalCmplToday	1.3.6.1.4.1.6889.2.8.1.110.20	DisplayString	read-only	An object containing the total number of calls completed in the listed busy interval
STR g3callratedataMeasHour3	1.3.6.1.4.1.6889.2.8.1.110.21	DisplayString	read-only	An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded
STR g3callratedataNumCallsToday1	1.3.6.1.4.1.6889.2.8.1.110.22	DisplayString	read-only	The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour
STR g3callratedataBsyIntTodayHr	1.3.6.1.4.1.6889.2.8.1.110.23	DisplayString	read-only	An object containing the hour field of the hour with the busiest 36-second interval for today
STR g3callratedataBsyIntTodayMn	1.3.6.1.4.1.6889.2.8.1.110.24	DisplayString	read-only	An object containing the minute field of the hour with the busiest 36-second interval for today
STR g3callratedataBsyIntTodaySc	1.3.6.1.4.1.6889.2.8.1.110.25	DisplayString	read-only	An object containing the second field of the hour with the busiest 36-second interval for today
STR g3callratedataBsyCalCmplToday2	1.3.6.1.4.1.6889.2.8.1.110.26	DisplayString	read-only	An object containing the total number of calls completed in the listed busy interval
STR g3callratedataMeasHour4	1.3.6.1.4.1.6889.2.8.1.110.27	DisplayString	read-only	An object containing the starting time (using 24-hour clock)of the hour during which the data was recorded
STR g3callratedataNumCallsToday3	1.3.6.1.4.1.6889.2.8.1.110.28	DisplayString	read-only	The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour
STR g3callratedataBsyIntHrYesterday	1.3.6.1.4.1.6889.2.8.1.110.29	DisplayString	read-only	An object containing yesterday's busiest hour.This is the hour with the largest number of completed calls
STR g3callratedataBsyIntMnYesterday	1.3.6.1.4.1.6889.2.8.1.110.30	DisplayString	read-only	An object containing the minute field of yesterday's busiest hour
STR g3callratedataBsyIntScYesterday	1.3.6.1.4.1.6889.2.8.1.110.31	DisplayString	read-only	An object containing the second field of yesterday's busiest hour
STR g3callratedataBsyCalCmplYesterday	1.3.6.1.4.1.6889.2.8.1.110.32	DisplayString	read-only	An object containing the total number of calls completed in the listed busy interval
STR g3callratedataMeasHour5	1.3.6.1.4.1.6889.2.8.1.110.33	DisplayString	read-only	An object containing the starting time (using 24-hour clock)of the hour during which the data was recorded
STR g3callratedataNumCallsYesterday	1.3.6.1.4.1.6889.2.8.1.110.34	DisplayString	read-only	The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour
STR g3callratedataBsyIntHrYesterday2	1.3.6.1.4.1.6889.2.8.1.110.35	DisplayString	read-only	An object containing the hour field of the hour with the busiest 36-second interval for yesterday
STR g3callratedataBsyIntMnYesterday2	1.3.6.1.4.1.6889.2.8.1.110.36	DisplayString	read-only	An object containing the minute field of the hour with the busiest 36-second interval for yesterday
STR g3callratedataBsyIntScYesteday2	1.3.6.1.4.1.6889.2.8.1.110.37	DisplayString	read-only	An object containing the second field of the hour with the busiest 36-second interval for yesterday
STR g3callratedataBsyCalCmplYesterday2	1.3.6.1.4.1.6889.2.8.1.110.38	DisplayString	read-only	An object containing the total number of calls completed in the listed busy interval
g3callratevoice	1.3.6.1.4.1.6889.2.8.1.111
INT g3callratevoiceTage	1.3.6.1.4.1.6889.2.8.1.111.1	INTEGER	read-only	The number of timeticks since the call rate data was last extracted from the switch by the Proxy Agent. This object along with the g3callratevoiceTintvl object allows the Network Manager to determine the validity of the call rate data in the cache and to control when the Proxy Agent extracts the data from the switch.
INT g3callratevoiceTintvl	1.3.6.1.4.1.6889.2.8.1.111.2	INTEGER	read-write	An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent.When a GET or GET-NEXT request for these call rate data objects is received by the agent it uses the g3callratevoiceTage and g3callratevoiceTintvl objects to determine whether it should refresh the cached callratevoiceTable. If g3callratevoiceTstmp + g3callratevoiceTintvl is less than the current value of the sysUpTime object then the agent refreshes the callrayevoiceTable cache.In either case it responds to the requests it receives with the data it currently has in the cache.
INT g3callratevoiceTdelay	1.3.6.1.4.1.6889.2.8.1.111.3	INTEGER	read-only	An object containing the delay encountered in updating the cached data.
INT g3callratevoiceTretrieve	1.3.6.1.4.1.6889.2.8.1.111.4	INTEGER	read-write	An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache.
INT g3callratevoiceRunYear	1.3.6.1.4.1.6889.2.8.1.111.5	INTEGER	read-only	An object containing the Year the command was executed
INT g3callratevoiceRunMonth	1.3.6.1.4.1.6889.2.8.1.111.6	INTEGER	read-only	An object containing the Month the command was executed
INT g3callratevoiceRunDay	1.3.6.1.4.1.6889.2.8.1.111.7	INTEGER	read-only	An object containing the Day the command was executed
INT g3callratevoiceRunHour	1.3.6.1.4.1.6889.2.8.1.111.8	INTEGER	read-only	An object containing the Hour the command was executed
STR g3callratevoiceMeasHour	1.3.6.1.4.1.6889.2.8.1.111.9	DisplayString	read-only	An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded
STR g3callratevoiceNumCalls	1.3.6.1.4.1.6889.2.8.1.111.10	DisplayString	read-only	The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour.
STR g3callratevoiceBsyIntHr	1.3.6.1.4.1.6889.2.8.1.111.11	DisplayString	read-only	An object containing
STR g3callratevoiceBsyIntMn	1.3.6.1.4.1.6889.2.8.1.111.12	DisplayString	read-only	An object containing
STR g3callratevoiceBsyIntSc	1.3.6.1.4.1.6889.2.8.1.111.13	DisplayString	read-only	An object containing
STR g3callratevoiceBsyCalCmpl	1.3.6.1.4.1.6889.2.8.1.111.14	DisplayString	read-only	An object containing the total number of calls completed in the listed busy interval.

RFC description

Avaya Definity G3 switch MIB for managing telephone exchange connectivity, configuration, and health.

Start monitoring Avaya G3/Definity communications server (PBX) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download G3-AVAYA-MIB