All MIBs › AcBoard
Organization: AudioCodes Ltd
Last Updated: 2010-02--0
Category: Hardware and Environment, Telephony and VoIP, Vendor: AudioCodes
Description: Defines board and module management object types shared across AudioCodes modular gateway product lines for hardware inventory and status reporting.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is AcBoard?
AcBoard is a vendor-specific MIB from AudioCodes that defines board and module management objects shared across AudioCodes' modular voice gateway product lines, covering hardware configuration, TDM bus settings, network settings, trunk/PSTN protocol configuration, and default channel parameters. Its boardConfiguration branch includes boardTDMBusSettings (PCM companding law, TDM bus clock source/speed/type, master/slave selection), networkSettings (UDP port ranges, gateway/board IP addresses, control-protocol type, SNMP manager table, NTP settings), trunkSettings (per-trunk framing method, PSTN protocol type such as ISDN/CAS/QSIG variants, line code, D-channel/NFAS configuration, administrative state), and mGCPSettings/acDefaultChannelSettings for MGCP call-agent addressing and default voice/fax channel behavior (jitter buffer, fax relay/bypass mode, DTMF handling). Notably, nearly all objects in this MIB are marked STATUS obsolete as of the version 4.4 update, reflecting a legacy configuration model superseded by newer AudioCodes management interfaces, though the objects remain readable for legacy deployments. It has no cross-MIB dependencies beyond standard SNMPv2-SMI/TC imports and is deployed on AudioCodes modular gateway hardware (e.g., TrunkPack-VoIP boards). Engineers supporting legacy AudioCodes gateways can download the AcBoard MIB Browser-compatible file to inspect board, trunk, and channel default configuration on these systems.
IPNetwork Monitor allows you to monitor SNMP objects defined in AcBoard. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- AudioCodes modular voice gateway boards (e.g., TrunkPack-VoIP product line)
Monitoring Examples
An operator polls trunkSettingsTable (indexed by trunkId) to check protocolType and acTrunkAdminState for a given E1/T1 trunk, alongside acLedStatusColor; a trunk showing acTrunkAdminState locked(0) or acLedStatusColor red(1) would indicate the trunk is administratively disabled or reporting a hardware/line fault, disrupting voice call capacity on that trunk.
What Can Be Monitored
- TDM bus clock source and configuration
- per-trunk PSTN protocol type and administrative state
- trunk LED status color/blink rate (fault indication)
- network/SNMP manager and NTP configuration
- MGCP call-agent addressing
- default channel jitter buffer, fax, and DTMF handling settings
This MIB depends on
Related MIBs
Imported Objects
From RFC1155-SMI
| IpAddress |
From SNMPv2-SMI
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| enterprises |
From SNMPv2-TC
| DateAndTime | |
| DisplayString | |
| TAddress | |
| TEXTUAL-CONVENTION |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| NTF acActiveAlarmTableOverflow | 1.3.6.1.4.1.5003.9.10.1.21.2.0.12 | An active alarm could not be placed in the active alarm table because the table is full. This alarm will not clear. Reboot is the only way to completely clear the Active Alarm table overflow problem. Any alarm raised at this state will not be Carrier Grade compatible. Therefore, Updates will not clear the alarm before changing the bindings and re-raising alarms. The History tables remain unaffected. All Alarms raised prior to overflow will remain Carrier Grade compatible. Other alarms, raised after this alarm was raised, that are placed in the Active Alarm table will be Carrier Grade compatible. (This is for when after the alarm was raised there were some clears, clearing alarms off the Active Alarm table). | ||
| OCT acActiveFeaturesList | 1.3.6.1.4.1.5003.9.10.1.1.90.2 | OCTET STRING | read-only | List of all avtivated features. |
| NTF acAMSProcedureResult | 1.3.6.1.4.1.5003.9.10.1.21.2.0.54 | AMS procedure related information | ||
| NTF acAnalogPortGroundFaultOutOfService | 1.3.6.1.4.1.5003.9.10.1.21.2.0.76 | Raised when the MP500 FXS port is inactive due to ground fault. | ||
| NTF acAnalogPortHighTemperature | 1.3.6.1.4.1.5003.9.10.1.21.2.0.47 | Analog Port High Temperature | ||
| NTF acAnalogPortSPIOutOfService | 1.3.6.1.4.1.5003.9.10.1.21.2.0.46 | Analog port out of service | ||
| NTF acAtmPortAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.13 | ATM Port Alarm | ||
| NTF acAudioProvisioningAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.14 | This alarm is raised if the Media Server is unable to provision its audio. This could be because the Audio Provisioning System (APS) is down or there is a network problem. | ||
| acBoard | 1.3.6.1.4.1.5003.9.10.1 | AudioCodes Proprietary MIB Contains The managed objects of AudioCodes systems. Through this MIB, the User can set up the board configuration parameters, reset the board, and monitor the board's operational robustness and quality of service during run-time. This MIB has the following Groups: boardConfiguration boardInformation channelConfiguration channelStatus notifications reset boardConfiguration: When The user Get Parameter from most of sub-groups in boardConfiguration group, he gets the value that should be burned to the board after the next Remote Reset. He can Set new values to many parameters, and these values will burned to the board after the next remote Reset In the sub-group mGCPDefaultChannelSettings the parameters are the actual parameters, that will take place when opening channel. (Reset is not needed for that sub-group). BoardInformation: Contains Read-only parameters like: board name, serial number, number of channels, software version. ChannelConfiguration: Read-only Parameters to see the configuratin of each channel: voice settings, fax settings, etc. ChannelStatus: Read-only parameters about the status of channel, like: Is the channle active, is it in Silence Period, is it in Fax mode, ON/Off hook, etc. This group contains also counters: packets to DSP, errors, lost packets, underruns, etc. Notifications: In this version, the notification we have are: acEvBoardStarted, and acEvResetingBoard. The board should send these notifications to its manager that the user defined in INI file with the parameter: NMPManagerIP = (IP address). Reset: To remote reset the board, the user should set an integer value to the parameter remoteReset. Then he should get the trap acEvResettingBoard. Note: Before Reset, The current boardConfiguration parameters will be burned to the board. The user should not use INI file, if he wants these parameters to take place. To set the default values, the user should set an integer value to the parameter acSetDefaults. | ||
| NTF acBoardCallResourcesAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.8 | No free channels available | ||
| NTF acBoardConfigurationError | 1.3.6.1.4.1.5003.9.10.1.21.2.0.2 | Configuration Error | ||
| NTF acBoardControllerFailureAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.9 | The GK/Proxy not found or registration failed. internal routing table may be used for routing | ||
| NTF acBoardEthernetLinkAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.10 | Ethernet Link is down or remote Ethernet link is down and board has no communication to any other host | ||
| NTF acBoardEvBoardStarted | 1.3.6.1.4.1.5003.9.10.1.21.2.0.4 | Initialization Ended | ||
| NTF acBoardEvResettingBoard | 1.3.6.1.4.1.5003.9.10.1.21.2.0.5 | The board start Reset process - following software reset | ||
| NTF acBoardFatalError | 1.3.6.1.4.1.5003.9.10.1.21.2.0.1 | Board fatal error | ||
| INT acBoardFxsOrFxo | 1.3.6.1.4.1.5003.9.10.1.2.13 | INTEGER | read-only | Board is Fxs Or Fxo |
| acBoardMibs | 1.3.6.1.4.1.5003.9.10 | |||
| NTF acBoardOverloadAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.11 | Overload in one or some of the system's components | ||
| INT acBoardTemperature | 1.3.6.1.4.1.5003.9.10.1.2.22 | INTEGER | read-only | Temperature of the board in degrees Celsius, should not go higher then 60! |
| NTF acBoardTemperatureAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.3 | Temperature Alarm. Turned on when temperature exceeds 60 degrees Celsius, and relaxes when temperature goes under 55 again. | ||
| acBoardTrapDefinitions | 1.3.6.1.4.1.5003.9.10.1.21.2 | |||
| acBoardTrapGlobals | 1.3.6.1.4.1.5003.9.10.1.21.1 | |||
| OCT acBoardTrapGlobalsAdditionalInfo1 | 1.3.6.1.4.1.5003.9.10.1.21.1.8 | OCTET STRING | read-only | Trap additional info global field |
| OCT acBoardTrapGlobalsAdditionalInfo2 | 1.3.6.1.4.1.5003.9.10.1.21.1.9 | OCTET STRING | read-only | Trap additional info global field |
| OCT acBoardTrapGlobalsAdditionalInfo3 | 1.3.6.1.4.1.5003.9.10.1.21.1.10 | OCTET STRING | read-only | Trap additional info global field |
| DAT acBoardTrapGlobalsDateAndTime | 1.3.6.1.4.1.5003.9.10.1.21.1.11 | DateAndTime | read-only | Date and time that the trap was sent. |
| INT acBoardTrapGlobalsName | 1.3.6.1.4.1.5003.9.10.1.21.1.1 | INTEGER | read-only | trap name |
| INT acBoardTrapGlobalsProbableCause | 1.3.6.1.4.1.5003.9.10.1.21.1.7 | INTEGER | read-only | Trap probable cause - SnmpAlarmProbableCause |
| INT acBoardTrapGlobalsSeverity | 1.3.6.1.4.1.5003.9.10.1.21.1.4 | INTEGER | read-only | Trap Severity |
| OCT acBoardTrapGlobalsSource | 1.3.6.1.4.1.5003.9.10.1.21.1.3 | OCTET STRING | read-only | Trap Source - MG1/Shelf1/Board2/Trunk3 |
| OCT acBoardTrapGlobalsTextualDescription | 1.3.6.1.4.1.5003.9.10.1.21.1.2 | OCTET STRING | read-only | title of trap |
| INT acBoardTrapGlobalsType | 1.3.6.1.4.1.5003.9.10.1.21.1.6 | INTEGER | read-only | Trap type - ItuAlarmType |
| INT acBoardTrapGlobalsUniqID | 1.3.6.1.4.1.5003.9.10.1.21.1.5 | INTEGER | read-only | Trap Uniq Id - generated by AcBoard and should be uniq for the entire EMS |
| INT acCallerIDType | 1.3.6.1.4.1.5003.9.10.1.3.3.1.1.2 | INTEGER | read-only | CallerID Type. |
| OCT acCasTabeName | 1.3.6.1.4.1.5003.9.10.1.1.11.21.1.1.2 | OCTET STRING | read-only | Cas Table Name |
| INT acCasTableIndex | 1.3.6.1.4.1.5003.9.10.1.1.11.21.1.1.1 | INTEGER | read-only | Cas Table Indexd |
| acCasTables | 1.3.6.1.4.1.5003.9.10.1.1.11.21 | |||
| acCasTablesEntry | 1.3.6.1.4.1.5003.9.10.1.1.11.21.1.1 | not-accessible | ||
| acCasTablesTable | 1.3.6.1.4.1.5003.9.10.1.1.11.21.1 | not-accessible | ||
| INT acChDefaultCallerIDType | 1.3.6.1.4.1.5003.9.10.1.1.6.3 | INTEGER | read-write | The supported caller ID standard types |
| INT acChDefaultDJBufMinDelay | 1.3.6.1.4.1.5003.9.10.1.1.6.1 | INTEGER | read-write | Dynamic Jitter Buffer Minimum Delay (msec) |
| INT acChDefaultDJBufOptFactor | 1.3.6.1.4.1.5003.9.10.1.1.6.2 | INTEGER | read-write | Dynamic Jitter Buffer frame error/delay optimization. |
| INT acChDefaultDTMFDetectionPoint | 1.3.6.1.4.1.5003.9.10.1.1.6.29 | INTEGER | read-write | Defines if the detection of DTMF events is notified at the end of DTMF or at the start of DTMF. |
| INT acChDefaultDTMFTransportType | 1.3.6.1.4.1.5003.9.10.1.1.6.21 | INTEGER | read-write | 0 = Mute = erases digit from voice stream does not relay to remote. 2 = Transparent = digits remains in voice stream. 3 = RFC 2833 relay = erase digit from voice stream relay to remote using RFC 2833 syntax. The other values as seen in the Value List (1 and 7) are not supported as of version 4.4. |
| INT acChDefaultDTMFVolume | 1.3.6.1.4.1.5003.9.10.1.1.6.20 | INTEGER | read-write | DTMF generation Volume Control |
| INT acChDefaultEchoCancler | 1.3.6.1.4.1.5003.9.10.1.1.6.32 | INTEGER | read-write | Controls the activation of the Echo Canceler (refer also to 'ForceEchoOff') |
| INT acChDefaultEchoCanclerHybridLoss | 1.3.6.1.4.1.5003.9.10.1.1.6.34 | INTEGER | read-write | Sets worst case ratio between signal level transmitted to hybrid & echo level returning from hybrid. Set this per worst hybrid in the system in terms of echo return loss. Refer to acTECHybridLoss enumeration: |
| INT acChDefaultFaxModemBypassCoderType | 1.3.6.1.4.1.5003.9.10.1.1.6.17 | INTEGER | read-write | The User can set the bypass coder (according to the known coders) |
| INT acChDefaultFaxModemBypassM | 1.3.6.1.4.1.5003.9.10.1.1.6.4 | INTEGER | read-write | Number of basic frames to generating one RTP fax/modem bypass packet. |
| INT acChDefaultFaxModemRelayVolume | 1.3.6.1.4.1.5003.9.10.1.1.6.5 | INTEGER | read-write | Fax gain control. The range -18 to -3 relates to -18.5 dBm to -3.5 dBm in 1 dBm steps. |
| INT acChDefaultFaxRelayECMEnable | 1.3.6.1.4.1.5003.9.10.1.1.6.6 | INTEGER | read-write | Enables or disables the using of ECM mode during Fax Relay. |
| INT acChDefaultFaxRelayMaxRate | 1.3.6.1.4.1.5003.9.10.1.1.6.7 | INTEGER | read-write | Limits the maximum rate at which fax messages are transmitted. |
| INT acChDefaultFaxRelayRedundancyDepth | 1.3.6.1.4.1.5003.9.10.1.1.6.18 | INTEGER | read-write | Default: Fax Relay Redundancy Depth. Number of repetitions to be applied to each fax relay payload when transmitting to network. |
| INT acChDefaultFaxTransportMode | 1.3.6.1.4.1.5003.9.10.1.1.6.8 | INTEGER | read-write | Sets the Fax over IP transport method. |
| INT acChDefaultFlashHookPeriod | 1.3.6.1.4.1.5003.9.10.1.1.6.28 | INTEGER | read-write | Flash hook period. |
| INT acChDefaultInputGain | 1.3.6.1.4.1.5003.9.10.1.1.6.23 | INTEGER | read-write | PCM input gain. The range is 31 dB to +31 dB in 1 dB steps. |
| INT acChDefaultM | 1.3.6.1.4.1.5003.9.10.1.1.6.27 | INTEGER | read-write | Number of DSP payloads for generating one RTP packet |
| INT acChDefaultMFTransportType | 1.3.6.1.4.1.5003.9.10.1.1.6.22 | INTEGER | read-write | 0 = erase MFs from voice transport not relayed to remote. 2 = MFs not erased not relayed to remote. 3 = MFs are muted from the voice stream & relayed according to RFC 2833. |
| INT acChDefaultModemRelayMaxRate | 1.3.6.1.4.1.5003.9.10.1.1.6.10 | INTEGER | read-write | Default: Modem Relay Max Rate |
| INT acChDefaultModemRelayRedundancyDepth | 1.3.6.1.4.1.5003.9.10.1.1.6.9 | INTEGER | read-write | Amount of redundancy for fax relay packets |
| INT acChDefaultPacketizationPeriod | 1.3.6.1.4.1.5003.9.10.1.1.6.35 | INTEGER | read-write | Packetization Period |
| INT acChDefaultRtpIpPrecedence | 1.3.6.1.4.1.5003.9.10.1.1.6.31 | INTEGER | read-write | Sets value of the IP precedence field in the IP header for all packets generated from this channel. Follow the acTIPPrecedence enumeration. |
| INT acChDefaultRtpIpTos | 1.3.6.1.4.1.5003.9.10.1.1.6.30 | INTEGER | read-write | Sets value of IP Type Of Service field in IP header for all packets generated from this channel. Follow the acTIPTOS enumeration. |
| INT acChDefaultRTPRedundancyDepth | 1.3.6.1.4.1.5003.9.10.1.1.6.24 | INTEGER | read-write | Enables or disables generation of RFC 2198 redundancy packets. |
| INT acChDefaultSilenceSuppression | 1.3.6.1.4.1.5003.9.10.1.1.6.33 | INTEGER | read-write | Silence Suppression mode |
| INT acChDefaultT38ProtectionMode | 1.3.6.1.4.1.5003.9.10.1.1.6.19 | INTEGER | read-write | Default: T38 Protection Mode. Use Forward Error Correction (FEC) algorithm to protect T.38 fax relay stream. |
| INT acChDefaultTestMode | 1.3.6.1.4.1.5003.9.10.1.1.6.25 | INTEGER | read-write | Testing mode applied. 0 = Coder Loopback performs an encoder/decoder loopback inside DSP device. 1 = PCMLoopback loops back incoming PCM to the outgoing PCM. 2 = ToneInjection generates a 1000 Hz tone to outgoing PCM. 3 = NoLoopback sets the channel to work in normal mode. |
| INT acChDefaultUseT38orFRF11 | 1.3.6.1.4.1.5003.9.10.1.1.6.11 | INTEGER | read-write | Selects protocol to send/ receive fax relay. |
| INT acChDefaultV21ModemTransportType | 1.3.6.1.4.1.5003.9.10.1.1.6.12 | INTEGER | read-write | Sets the V.21 modem transport method (must be set to 0 = disable) |
| INT acChDefaultV22ModemTransportType | 1.3.6.1.4.1.5003.9.10.1.1.6.13 | INTEGER | read-write | Sets the V.22 modem transport method |
| INT acChDefaultV23ModemTransportType | 1.3.6.1.4.1.5003.9.10.1.1.6.14 | INTEGER | read-write | Sets the V.23 modem transport method |
| INT acChDefaultV32ModemTransportType | 1.3.6.1.4.1.5003.9.10.1.1.6.15 | INTEGER | read-write | Sets the V.32 modem transport method |
| INT acChDefaultV34ModemTransportType | 1.3.6.1.4.1.5003.9.10.1.1.6.16 | INTEGER | read-write | Sets the V.34 modem transport method |
| INT acChDefaultVoiceVolume | 1.3.6.1.4.1.5003.9.10.1.1.6.26 | INTEGER | read-write | Voice output gain control the range is -31 dB to +31 dB in 1 dB steps -32 = mute. |
| acConfigFiles | 1.3.6.1.4.1.5003.9.10.1.1.11 | |||
| INT acContrlProtocolTransportType | 1.3.6.1.4.1.5003.9.10.1.1.2.10 | INTEGER | read-write | Defines the transport type for the control: 0 - UDP, 1 - TCP (SCTP on road map). |
| INT acCPControlDiffServ | 1.3.6.1.4.1.5003.9.10.1.1.2.11 | INTEGER | read-write | Defines the value of the 'DiffServ' field in the IP header for the control session. |
| OCT acCptFile | 1.3.6.1.4.1.5003.9.10.1.1.11.3 | OCTET STRING | read-only | . |
| NTF acDChannelStatus | 1.3.6.1.4.1.5003.9.10.1.21.2.0.37 | This non alarm trap is sent when establishment, re-establishment or release of LAPD link with its peer connection occurs. The trap will be sent out with one of the following in the textual description: D-channel synchronized D-channel not-synchronized | ||
| acDefaultChannelSettings | 1.3.6.1.4.1.5003.9.10.1.1.6 | |||
| NTF acDialPlanFileReplaced | 1.3.6.1.4.1.5003.9.10.1.21.2.0.45 | dial plan file replaced notification | ||
| INT acDisableWEBConfig | 1.3.6.1.4.1.5003.9.10.1.1.2.8 | INTEGER | read-write | Enables or disables Web Configuration 0-Read & Write mode(default) 1-Read Only mode |
| NTF acDS3AISAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.67 | DS3 AIS alarm. | ||
| NTF acDS3LOFAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.68 | DS3 LOF alarm. | ||
| NTF acDS3LOSAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.69 | DS3 LOS alarm. | ||
| NTF acDS3RAIAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.66 | DS3 RAI alarm. | ||
| INT acDspType | 1.3.6.1.4.1.5003.9.10.1.2.11 | INTEGER | read-only | Dsp Type |
| INT acDspVersionTemplate | 1.3.6.1.4.1.5003.9.10.1.2.15 | INTEGER | read-only | selects the DSP load number, which defines the supported set of coders. Default=0 Each template assigns a specific version to each DSP. Each DSP version supports a set of coders and features. The number of channels supported by the DSP can also vary between DSP versions. The total number of channels supported by the board depends on the selected template. |
| INT acEnableSyslog | 1.3.6.1.4.1.5003.9.10.1.1.2.9 | INTEGER | read-write | Enable SysLog protocol log. |
| NTF acEnhancedBITStatus | 1.3.6.1.4.1.5003.9.10.1.21.2.0.18 | This trap is used to for the status of the BIT (Built In Test). The information in the trap contains board HW elements being tested and their status. The information is presented in the additional info fields. | ||
| NTF acFanTrayAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.29 | This alarm is raised when the fan tray is missing or some of the fans are faulty. If the fan tray is missing or more then X fans are faulty the severity will be Critical. If more then one and less the X fans are faulty the severity will be Major. | ||
| acFeatureKey | 1.3.6.1.4.1.5003.9.10.1.1.90 | |||
| NTF acFeatureKeyError | 1.3.6.1.4.1.5003.9.10.1.21.2.0.6 | Feature key related Error | ||
| OCT acFeatureKeyString | 1.3.6.1.4.1.5003.9.10.1.1.90.1 | OCTET STRING | read-write | Coded Key specific for board and required features. |
| INT acFirstPortDuplexMode | 1.3.6.1.4.1.5003.9.10.1.2.16 | INTEGER | read-only | full-duplex or half-duplex connection |
| INT acFirstPortSpeed | 1.3.6.1.4.1.5003.9.10.1.2.17 | INTEGER | read-only | . |
| INT acFlashVersion | 1.3.6.1.4.1.5003.9.10.1.2.12 | INTEGER | read-only | Flash [BootLoader] Version. |
| OCT acFxoCoefficients | 1.3.6.1.4.1.5003.9.10.1.1.11.2 | OCTET STRING | read-only | The FXO coefficient file name. |
| acFxs | 1.3.6.1.4.1.5003.9.10.1.1.12 | |||
| OCT acFxsCoefficients | 1.3.6.1.4.1.5003.9.10.1.1.11.1 | OCTET STRING | read-only | The FXS coefficient file name. |
| acGeneric | 1.3.6.1.4.1.5003.8 | |||
| INT acgwAdminState | 1.3.6.1.4.1.5003.9.10.1.6.3 | INTEGER | read-write | Determines the gateway's operational state. 0 - locked: Shutdown the GW In the time frame set by acgwAdminStateLockControl 1 - shuttingDown: (read only) Graceful Shutdown is being carried out 2 - unlocked: GW is in service. |
| NTF acgwAdminStateChange | 1.3.6.1.4.1.5003.9.10.1.21.2.0.7 | The administrative state of the gate way has been changed to a new state. | ||
| INT acgwAdminStateLockControl | 1.3.6.1.4.1.5003.9.10.1.6.4 | INTEGER | read-write | (in sec) time left for the graceful shutdown to complete. -1 indicates unlimited time frame. 0 indicates immediate (forced) lock. Implementing the control requires setting acgwAdminState to locked. |
| NTF acGWSASEmergencyModeAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.59 | The alarm is raised when SAS enters the Emergency Mode and then cleared when SAS enters Normal Mode again. | ||
| NTF acH248LostConnectionWithCA | 1.3.6.1.4.1.5003.9.10.1.21.2.0.44 | H248 lost connection with call agent | ||
| NTF acHASystemConfigMismatchAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.34 | This alarm is raised when the HA (High Availability) feature is active and there has been a configuration change due to which the HA system may or may not be usable. | ||
| NTF acHASystemFaultAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.33 | This alarm is raised when the HA (High Availability) feature is active and the system is NOT HA. Critical severity - 1.Wrong HW Configuration. 2. Redundant module is missing (not in slot). 3. The redundant module is non operable. Minor severity - waiting for redunadant to connect (after reset!). | ||
| NTF acHASystemSwitchOverAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.35 | This alarm is raised when the HA (High Availability) feature is active and there has been a switchover due to failure or reset in the active module. | ||
| NTF acHitlessUpdateStatus | 1.3.6.1.4.1.5003.9.10.1.21.2.0.48 | Notification trap that is sent out at the beginning and the end of a Hitless SW update. Failure during the process will also instigate the trap. Relevant to HA systems only. | ||
| NTF acHTTPDownloadResult | 1.3.6.1.4.1.5003.9.10.1.21.2.0.28 | This trap indicates the result of a recent file download (includes HTTP error code, if available). | ||
| NTF acHwFailureAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.43 | HW failure alarm. | ||
| NTF acIPv6ErrorAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.53 | Alarm trap that is sent out for IPv6 related errors. | ||
| INT acIsdnDuplicateQ931BuffMode | 1.3.6.1.4.1.5003.9.10.1.1.14.2 | INTEGER | read-write | Activates / de-activates delivery of raw Q.931 messages. This Object is obsolete and is replaces by acTrunkISDNCommonDuplicateQ931BuffMode in the acPSTN-MIB. |
| INT acIsdnGeneralCCBehavior | 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.26 | INTEGER | read-write | This is the bit-field used to determine several general ISDN behavior options. Refer to the Appendix A.8 'ISDN Flexible Behavior' in the VoPLib Reference Library User's Manual Document #: LTRT-00740. |
| INT acIsdnIncomingCallsBehavior | 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.24 | INTEGER | read-write | This is the bit-field used to determine several behavior options that influence how the ISDN Stack INCOMING calls behave. Refer to the Appendix A.8 'ISDN Flexible Behavior' in the VoPLib Reference Library User's Manual Document #: LTRT-00740. |
| INT acIsdnNfasGroupNumber | 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.27 | INTEGER | read-write | Relevant only for T1 ISDN NFAS trunks indicates the group number of the NFAS group. ;Valid NFAS group numbers are only 1 to 4, 0 indicating that this trunk is not NFAS (in this case the ISDNNFASInterfaceID and DchConfig parameters are ignored). |
| INT acIsdnNfasInterfaceId | 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.19 | INTEGER | read-write | Defines the Interface ID works with NS_EXPLICIT_INTERFACE_ID bit. Refer to the Appendix A.8 'ISDN Flexible Behavior' in the VoPLib Reference Library User's Manual Document #: LTRT-00740. |
| INT acIsdnOutgoingCallsBehavior | 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.25 | INTEGER | read-write | This is the bit-field used to determine several behavior options that influence how the ISDN Stack OUTGOING calls behave. Refer to Appendix A.8 in the 'VoPLib Reference Library User's Manual. |
| INT acIsdnQ931LayerResponseBehavior | 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.23 | INTEGER | read-write | Bit-field used to determine several behavior options, which influence how the Q.931 protocol behaves. |
| NTF acKeepAlive | 1.3.6.1.4.1.5003.9.10.1.21.2.0.16 | This trap is the NAT Traversal keep alive trap. If the STUN application in the device detects a NAT then this trap will be sent out on a regular time laps - 9/10 of the acSysSTUNBindingLifeTime object. The AdditionalInfo1 varbind has the MAC address of the device. Note that all traps are sent out from the SNMP Port (usually 161). | ||
| NTF acLDAPLostConnection | 1.3.6.1.4.1.5003.9.10.1.21.2.0.75 | Raised when there is no connection to the LDAP server. | ||
| INT acLedStatusColor | 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.17 | INTEGER | read-only | Trunk led status color |
| INT acLedStatusRate | 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.18 | INTEGER | read-only | Trunk led status blinking rate |
| INT acMaxFreeChannels | 1.3.6.1.4.1.5003.9.10.1.2.19 | INTEGER | read-only | Max of Free Channels |
| INT acMeanFreeChannels | 1.3.6.1.4.1.5003.9.10.1.2.18 | INTEGER | read-only | Mean of Free Channels |
| INT acMGControlProtocolType | 1.3.6.1.4.1.5003.9.10.1.1.2.6 | INTEGER | read-write | This parameter defines the control protocol type 0 = none, 1 = MGCP, 2 = MEGACO, 4 = H323, 8 = SIP |
| NTF acNATTraversalAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.17 | When the NAT placed in front a device is identified as a symmetric NAT - this alarm is raised. It is cleared when a non-symmetric NAT or no NAT replace the symmetric one. | ||
| IP acNTPServerIPAddress | 1.3.6.1.4.1.5003.9.10.1.1.2.22.1 | IpAddress | read-write | NTP Server IP address. |
| NTF acNTPServerStatusAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.71 | NTP server status alarm. {@}Raised when the connection to the NTP server is lost. Cleared when the connection is reestablished. {@}Unset time (as a result of no connection to NTP server) may result with functionality degradation and failure in device. | ||
| acNTPSettings | 1.3.6.1.4.1.5003.9.10.1.1.2.22 | |||
| INT acNTPUpdateInterval | 1.3.6.1.4.1.5003.9.10.1.1.2.22.3 | INTEGER | read-write | NTPupdate interval in seconds. Default is 86400 (24 hours). Not recommended to be set beyond one month (2592000 sec). |
| INT acNTPUtcOffset | 1.3.6.1.4.1.5003.9.10.1.1.2.22.2 | INTEGER | read-write | NTP time to offset in seconds. Default is 0. Range - Between -43200 ot 43200 seconds. |
| NTF acOCSPServerStatusAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.78 | raised when OCSP connection is not available. | ||
| INT acOperationalState | 1.3.6.1.4.1.5003.9.10.1.6.6 | INTEGER | read-only | The operational state of the gateway. |
| NTF acOperationalStateChange | 1.3.6.1.4.1.5003.9.10.1.21.2.0.15 | This alarm is raised if the operational state of the node goes to disabled. The alarm is cleared when the operational state of the node goes to enabled. | ||
| INT acOverrideDefaultIdleABCDPattern | 1.3.6.1.4.1.5003.9.10.1.1.1.14 | INTEGER | read-write | Description: Override Default Idle ABCD Pattern. 0 - use defaults (0xf) 1 - use IdleABCDPattern. |
| INT acOverrideDefaultIdlePCMPattern | 1.3.6.1.4.1.5003.9.10.1.1.1.13 | INTEGER | read-write | Override Default Idle PCM Pattern. 0 - use defaults (0xff-Mulaw, 0x55-Alaw) 1 - use IdlePCMPattern. |
| NTF acPEMAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.31 | This alarm is raised when the HA (High Availability) feature is active. The severity is critical if one of the PEM units is missing and major if the electric wire to one of the units is disconnected. | ||
| NTF acPerformanceMonitoringThresholdCrossing | 1.3.6.1.4.1.5003.9.10.1.21.2.0.27 | This log trap is sent out for every time the threshold of a Performance Monitored object is crossed. The severity field is 'indeterminate' when the crossing is above the threshold and 'cleared' when it goes back under the threshold. The 'source' varbind in the trap indicates the object for which the threshold is being crossed. | ||
| INT acPhysicalModCount | 1.3.6.1.4.1.5003.9.10.1.2.21 | INTEGER | read-only | . |
| INT acPMStatus | 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.16 | INTEGER | read-write | performance Monitoring Enable/Disable. |
| INT acPolarityReversalType | 1.3.6.1.4.1.5003.9.10.1.1.12.1 | INTEGER | read-write | Sets the type of the polarity reversal signal used for the network far-end answer and disconnect indications. Smooth reversal prevents negative effects as non-required ringing. |
| NTF acPowerSupplyAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.30 | This alarm is raised when the HA (High Availability) feature is active and one of the power supply units is faulty. | ||
| acProducts | 1.3.6.1.4.1.5003.9 | |||
| INT acPSTNCASTableNum | 1.3.6.1.4.1.5003.9.10.1.1.14.3 | INTEGER | read-only | Indicates how many CAS protocol configuration files are loaded, when 0 is no CAS table. It should match the number of fields. |
| INT acPSTNIuaInterfaceId | 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.22 | INTEGER | read-write | IUA trunk interface ID value |
| acPSTNParameters | 1.3.6.1.4.1.5003.9.10.1.1.14 | |||
| INT acQ931RELAYMODE | 1.3.6.1.4.1.5003.9.10.1.1.14.1 | INTEGER | read-write | ISDN level 3 mode |
| acRegistrations | 1.3.6.1.4.1.5003.7 | |||
| NTF acSAMissingAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.32 | This alarm is raised when the SA module in the M3K MG is missing. Whenthere is no SAT there are no other chassis HW related alarms. Note - relevant only for M3K. | ||
| INT acSaveConfigToSystem | 1.3.6.1.4.1.5003.9.10.1.6.5 | INTEGER | read-write | This will save all current configuration in the board onto the flash. Any digit will call on the function. NOTE: Do NOT save the configuration while voice is running - this will cause a delay. |
| INT acSetDefaults | 1.3.6.1.4.1.5003.9.10.1.6.2 | INTEGER | read-write | To set the default values, set an integer value to this parameter |
| IP acSNMPManagerIP | 1.3.6.1.4.1.5003.9.10.1.1.2.7 | IpAddress | read-write | SNMP manager server IP address |
| NTF acSonetIfHwFailureAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.42 | SONET or SDH medium Interface has failed. | ||
| NTF acSonetLineAISAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.40 | SONET Line AIS alarm. | ||
| NTF acSonetLineRDIAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.41 | SONET Line RDI alarm. | ||
| NTF acSonetPathSignalLabelMismatchAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.65 | Sonet Path Signal Label Mismatch alarm. | ||
| NTF acSonetPathSTSAISAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.62 | Sonet Path STS AIS alarm. | ||
| NTF acSonetPathSTSLOPAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.61 | Sonet Path STS LOP alarm. | ||
| NTF acSonetPathSTSRDIAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.63 | Sonet Path STS RDI alarm. | ||
| NTF acSonetPathUnequippedAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.64 | Sonet Path Unequipped alarm. | ||
| NTF acSonetSectionLOFAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.38 | SONET section Loss of Frame alarm. | ||
| NTF acSonetSectionLOSAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.39 | SONET section Loss of Signal alarm. | ||
| NTF acSS7AliasPcStateChangeAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.73 | raised when the Alias PC is in BUSY state. Cleared when it is in In-Service state. | ||
| NTF acSS7LinkBlockStateChangeAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.21 | This alarm is raised if the SS7 link becomes blocked (local or remote). The alarm is cleared when the link becomes unblocked - local AND remote. Note that this alarm will be raised for any change in the remote or local blocking status. | ||
| NTF acSS7LinkCongestionStateChangeAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.22 | This alarm is raised if the SS7 link becomes congested (local or remote). The alarm is cleared when the link becomes uncongested - local AND remote. Note that this alarm will be raised for any change in the remote or local congestion status. | ||
| INT acSS7LinkId | 1.3.6.1.4.1.5003.9.10.1.1.8.1.1.1 | INTEGER | read-write | SS7 Link Id. |
| NTF acSS7LinkInhibitStateChangeAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.20 | This alarm is raised if the SS7 link becomes inhibited (local or remote). The alarm is cleared when the link becomes uninhibited - local AND remote. Note that this alarm will be raised for any change in the remote or local inhibition status. | ||
| NTF acSS7LinkSetStateChangeAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.23 | This alarm is raised if the operational state of the SS7 linkset becomes BUSY. The alarm is cleared when the operational state of the linkset becomes IN-SERVICE or OFFLINE. | ||
| NTF acSS7LinkStateChangeAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.19 | This alarm is raised if the operational state of the SS7 link becomes XXXX. The alarm is cleared when the operational state of the link becomes XXXX. | ||
| NTF acSS7RedundancyAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.26 | Raised when the SS7 redundancy degregated. Cleared when all entities of redundancy are fully functional and in serveice. | ||
| NTF acSS7RouteSetStateChangeAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.24 | This alarm is raised if the operational state of the SS7 routeset becomes BUSY. The alarm is cleared when the operational state of the routeset becomes IN-SERVICE or OFFLINE. | ||
| acSS7Settings | 1.3.6.1.4.1.5003.9.10.1.1.8 | |||
| acSS7SettingsEntry | 1.3.6.1.4.1.5003.9.10.1.1.8.1.1 | not-accessible | ||
| acSS7SettingsTable | 1.3.6.1.4.1.5003.9.10.1.1.8.1 | not-accessible | ||
| NTF acSS7SNSetStateChangeAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.25 | This alarm is raised if the operational state of the SS7 node becomes BUSY. The alarm is cleared when the operational state of the node becomes IN-SERVICE or OFFLINE. | ||
| INT acSS7traceLevel | 1.3.6.1.4.1.5003.9.10.1.1.8.1.1.2 | INTEGER | read-write | . |
| NTF acSS7UalGroupStateChangeAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.74 | Raised when the Ual Group Asp state is not ACTIVE. Cleared when it is Active. | ||
| NTF acSSHConnectionStatus | 1.3.6.1.4.1.5003.9.10.1.21.2.0.77 | This trap indicates the result of a recent SSH connection attempt. | ||
| NTF acSWUpgradeAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.70 | Raised for SW upgrade process errors. | ||
| IP acSyslogServerIP | 1.3.6.1.4.1.5003.9.10.1.1.2.5 | IpAddress | read-write | IP address in dotted format notation, e.g., 192.10.1.255 |
| INT acSysUpTime | 1.3.6.1.4.1.5003.9.10.1.2.20 | INTEGER | read-only | Time (in Seconds) that the board is alive. |
| NTF acThreeWayConferenceOutOfResources | 1.3.6.1.4.1.5003.9.10.1.21.2.0.72 | Three way conference out of resources. | ||
| NTF acTMInconsistentRemoteAndLocalPLLStatus | 1.3.6.1.4.1.5003.9.10.1.21.2.0.56 | Inconsistent Remote And Local PLL Status | ||
| NTF acTMReferenceChange | 1.3.6.1.4.1.5003.9.10.1.21.2.0.58 | Timing manager reference Change | ||
| NTF acTMReferenceStatus | 1.3.6.1.4.1.5003.9.10.1.21.2.0.57 | Timing manager reference status | ||
| acTrap | 1.3.6.1.4.1.5003.9.10.1.21 | |||
| INT acTrunkAdminState | 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.21 | INTEGER | read-write | Trunk Administrative State |
| INT acTrunkCasTableIndex | 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.20 | INTEGER | read-write | Index of Cas Table used by this Trunk |
| NTF acTrunksAlarmFarEndLOF | 1.3.6.1.4.1.5003.9.10.1.21.2.0.52 | Loss of frame at trunk's far end. | ||
| NTF acTrunksAlarmNearEndLOF | 1.3.6.1.4.1.5003.9.10.1.21.2.0.50 | Loss of frame at trunk's near end. | ||
| NTF acTrunksAlarmNearEndLOS | 1.3.6.1.4.1.5003.9.10.1.21.2.0.49 | Loss of signal at trunk's near end. | ||
| NTF acTrunksAlarmRcvAIS | 1.3.6.1.4.1.5003.9.10.1.21.2.0.51 | Received AIS from trunk's far end. | ||
| INT acTrunkslCount | 1.3.6.1.4.1.5003.9.10.1.2.14 | INTEGER | read-only | Trunks Count. |
| NTF acUserInputAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.36 | This Alarm is raised when the input dry contact is short circuited. Cleared when the circuit is reopened. | ||
| NTF acV52InterfaceAlarm | 1.3.6.1.4.1.5003.9.10.1.21.2.0.60 | The alarm is raised for v5.2 interface errors and alarms.{@}For a detailed list of the interfaces' alarms see the acV5InterfceTable. | ||
| INT acV5InterfaceTrunkGroupId | 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.14 | INTEGER | read-only | copy from Table 8-1 in LIB manual 4.2beta |
| INT acV5LinkIdOld | 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.15 | INTEGER | read-write | copy from Table 8-1 in LIB manual 4.2beta |
| OCT acVpFile | 1.3.6.1.4.1.5003.9.10.1.1.11.4 | OCTET STRING | read-only | The name (and path) of the file containing the voice prompts |
| NTF acWeakRedundancy | 1.3.6.1.4.1.5003.9.10.1.21.2.0.55 | The system is in weak redundancy mode. Switch over is done with a reset to the board taking over. | ||
| acWEBAccess | 1.3.6.1.4.1.5003.9.10.1.1.2.23 | |||
| INT acWEBAccessAction | 1.3.6.1.4.1.5003.9.10.1.1.2.23.1.1.2 | INTEGER | read-write | WEB Access action |
| INT acWEBAccessActionResult | 1.3.6.1.4.1.5003.9.10.1.1.2.23.1.1.3 | INTEGER | read-only | WEB Access action result |
| acWEBAccessEntry | 1.3.6.1.4.1.5003.9.10.1.1.2.23.1.1 | not-accessible | ||
| INT acWEBAccessIndex | 1.3.6.1.4.1.5003.9.10.1.1.2.23.1.1.4 | INTEGER | read-only | WEB Access index |
| INT acWEBAccessRowStatus | 1.3.6.1.4.1.5003.9.10.1.1.2.23.1.1.1 | INTEGER | read-write | WEB Access row-status |
| acWEBAccessTable | 1.3.6.1.4.1.5003.9.10.1.1.2.23.1 | not-accessible | ||
| OCT acWEBAccessUserCode | 1.3.6.1.4.1.5003.9.10.1.1.2.23.1.1.6 | OCTET STRING | read-write | WEB Access user code |
| OCT acWEBAccessUserName | 1.3.6.1.4.1.5003.9.10.1.1.2.23.1.1.5 | OCTET STRING | read-write | WEB Access user name |
| INT amsAASPackagesProfile | 1.3.6.1.4.1.5003.9.10.1.1.51.10 | INTEGER | read-write | . |
| IP amsApsIpAddress | 1.3.6.1.4.1.5003.9.10.1.1.51.5 | IpAddress | read-write | Sets the destination IP to which the heartbeat packets are sent. |
| INT amsApsPort | 1.3.6.1.4.1.5003.9.10.1.1.51.6 | INTEGER | read-write | Sets the destination UDP port to which the heartbeat packets are sent. |
| aMsConfiguration | 1.3.6.1.4.1.5003.9.10.1.1.51 | |||
| INT amsNumOfAnnouncementPorts | 1.3.6.1.4.1.5003.9.10.1.1.51.4 | INTEGER | read-write | Number Of Test Trunk ports.� How many ports on the TPM are allocated to the Announcement service. |
| INT amsNumOfConferencePorts | 1.3.6.1.4.1.5003.9.10.1.1.51.1 | INTEGER | read-write | Number Of Conference ports.� How many ports on the TPM are allocated to the conferencing service. |
| INT amsNumOfLawfulInterceptPorts | 1.3.6.1.4.1.5003.9.10.1.1.51.3 | INTEGER | read-write | Number Of Test Trunk ports.� How many ports on the TPM are allocated to the Lawful Intercept service. |
| INT amsNumOfTestTrunkPorts | 1.3.6.1.4.1.5003.9.10.1.1.51.2 | INTEGER | read-write | Number Of Test Trunk ports.� How many ports on the TPM are allocated to the Test Trunk service. |
| INT amsPrimaryLanguage | 1.3.6.1.4.1.5003.9.10.1.1.51.7 | INTEGER | read-write | Primary Language |
| INT amsProfile | 1.3.6.1.4.1.5003.9.10.1.1.51.9 | INTEGER | read-write | AMS Profile Bit Mask: 1'st bit - APS Audio Enable/Disable 2'nd bit - Trunks Interface On/Off 3'td bit - Board Operation State change on ATM Port failure Enable/Disable. |
| INT amsSecondaryLanguage | 1.3.6.1.4.1.5003.9.10.1.1.51.8 | INTEGER | read-write | Secondary Language |
| INT aTMLoopBack | 1.3.6.1.4.1.5003.9.10.1.1.7.4 | INTEGER | read-write | Phy loopback. The loopback can be used for testing purposes. The loopback direction is towards the PSTN side |
| INT aTMPHYType | 1.3.6.1.4.1.5003.9.10.1.1.7.9 | INTEGER | read-write | External interface type of the board |
| aTMSettings | 1.3.6.1.4.1.5003.9.10.1.1.7 | |||
| audioCodes | 1.3.6.1.4.1.5003 | |||
| auxiliarySettings | 1.3.6.1.4.1.5003.9.10.1.1.3 | |||
| INT baseUDPPort | 1.3.6.1.4.1.5003.9.10.1.1.2.1 | INTEGER | read-write | Lower boundary of UDP ports to be used by the board. The upper boundary is BoardBaseUDPPort+10*(Number of Channels). Must be a multiple of 10. |
| boardConfiguration | 1.3.6.1.4.1.5003.9.10.1.1 | |||
| boardInformation | 1.3.6.1.4.1.5003.9.10.1.2 | |||
| IP boardIPAddr | 1.3.6.1.4.1.5003.9.10.1.1.2.3 | IpAddress | read-only | Board IP Address. in host byte order e.g. 192.10.1.2 = 0xc00a0102). Users should set the subnet mask to a valid value per the IP address. |
| OCT boardName | 1.3.6.1.4.1.5003.9.10.1.2.2 | OCTET STRING | read-only | The name fo the board |
| IP boardSubNetAddr | 1.3.6.1.4.1.5003.9.10.1.1.2.4 | IpAddress | read-only | Board SubNet Address. (in host byte order e.g. 255.255.255.0 = 0xffffff00). default =255.255.255.0. |
| INT boardTDMBusOutputPort | 1.3.6.1.4.1.5003.9.10.1.1.1.10 | INTEGER | read-write | Defines the SC/MVIP/H.100/H.110 port to be used for board's channel #0. All other channels then occupy the next timeslots sequentially |
| boardTDMBusSettings | 1.3.6.1.4.1.5003.9.10.1.1.1 | |||
| INT boardType | 1.3.6.1.4.1.5003.9.10.1.2.1 | INTEGER | read-only | The type of the Board. |
| INT bypassNIC | 1.3.6.1.4.1.5003.9.10.1.4.1.1.2 | INTEGER | read-only | Bypass NIC |
| OCT callAgentDomainName | 1.3.6.1.4.1.5003.9.10.1.1.5.3 | OCTET STRING | read-write | MGCP Call Agent domain name. |
| IP callAgentIP | 1.3.6.1.4.1.5003.9.10.1.1.5.1 | IpAddress | read-write | MGCP Call Agent IP address to be used for the initial RestartInProgress MGCP message (RSIP) (e.g., 192.10.1.255). Set to 0.0.0.0 to avoid sending RSIP. This parameter if in use overrides the Call Agent IP address provided in BootP. |
| INT callAgentPort | 1.3.6.1.4.1.5003.9.10.1.1.5.2 | INTEGER | read-write | Gate Way will use CallAgentPort as default UDP Port of MGCP Call Agent. |
| channelConfiguration | 1.3.6.1.4.1.5003.9.10.1.3 | |||
| INT channelHookState | 1.3.6.1.4.1.5003.9.10.1.4.1.1.18 | INTEGER | read-only | Channel Hook State |
| INT channelsCount | 1.3.6.1.4.1.5003.9.10.1.2.5 | INTEGER | read-only | Channel Count. |
| channelStatus | 1.3.6.1.4.1.5003.9.10.1.4 | |||
| channelStatusEntry | 1.3.6.1.4.1.5003.9.10.1.4.1.1 | not-accessible | ||
| channelStatusTable | 1.3.6.1.4.1.5003.9.10.1.4.1 | not-accessible | Data in voice SettingsTable uniquely identify a voice parameters of channel. | |
| channelTDMBusSettings | 1.3.6.1.4.1.5003.9.10.1.3.5 | |||
| channelTDMBusSettingsEntry | 1.3.6.1.4.1.5003.9.10.1.3.5.1.1 | not-accessible | ||
| channelTDMBusSettingsTable | 1.3.6.1.4.1.5003.9.10.1.3.5.1 | not-accessible | Data in channel TDM Bus Settings Table, uniquely identify TDM Bus sparameters of channel | |
| INT cID | 1.3.6.1.4.1.5003.9.10.1.3.2.1.1.1 | INTEGER | read-only | Channel ID |
| INT clockMaster | 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.2 | INTEGER | read-write | Selects the trunk clock source. When choosing acCLOCK_MASTER_OFF (= 0) the clock is recovered from the line. When choosing acCLOCK_MASTER_ON (= 1) the trunk clock source is provided by the internal/TDM bus clock source depending on the TDMBusClockSource parameter. |
| OCT cNAME | 1.3.6.1.4.1.5003.9.10.1.3.7.1.1.1 | OCTET STRING | read-only | RTP Canonical Name. Should be unique among all participants within one RTP session. Refer to RFC1890 for more information. Up to 255 characters string. (default ='ChX', X=CID). |
| INT coder | 1.3.6.1.4.1.5003.9.10.1.3.2.1.1.2 | INTEGER | read-only | Digital voice coder |
| INT cPUSpeed | 1.3.6.1.4.1.5003.9.10.1.2.6 | INTEGER | read-only | CPU Speed |
| INT dchConfig | 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.6 | INTEGER | read-write | Defines D-channel configuration. This setting is only applicable to ISDN PRI protocols that support NFAS and/or D-channel backup procedures. |
| IP defaultGatewayAddr | 1.3.6.1.4.1.5003.9.10.1.1.2.2 | IpAddress | read-only | Default Gateway Address. Board's Default Gateway IP address. (in host byte order e.g. 192.10.1.255 = 0xc00a01ff). |
| INT dePopulatedChannelsNumber | 1.3.6.1.4.1.5003.9.10.1.1.5.7 | INTEGER | read-write | This parameter can be used to enable MGCP call agent to access only subset of the on board channel bank. Set to -1 (or do not specify) to use all channels. |
| INT disablePayloadScrambling | 1.3.6.1.4.1.5003.9.10.1.1.7.10 | INTEGER | read-write | Disable/Enable Cell payload scrambling in the ATM PHY |
| INT disableSoftIPLoopback | 1.3.6.1.4.1.5003.9.10.1.3.6.1.1.2 | INTEGER | read-only | Disable Soft IP Loopback =1 in order to diable soft IP loopback. 0- Enables the hair pin connection made in case two channels on the same board are connected together. 1- Disables the hair pin connection made in case two channels on the same board are connected together. |
| dJBSettings | 1.3.6.1.4.1.5003.9.10.1.3.4 | |||
| dJBSettingsEntry | 1.3.6.1.4.1.5003.9.10.1.3.4.1.1 | not-accessible | ||
| dJBSettingsTable | 1.3.6.1.4.1.5003.9.10.1.3.4.1 | not-accessible | Data in dJB Settings Table uniquely identify jitter buffer parameters of channel. | |
| INT dJBufMinDelay | 1.3.6.1.4.1.5003.9.10.1.3.4.1.1.1 | INTEGER | read-only | [Millisec] Dynamic Jitter Buffer Minimum Delay. 0 - 150 (default =150) |
| INT dJBufOptFactor | 1.3.6.1.4.1.5003.9.10.1.3.4.1.1.2 | INTEGER | read-only | Dynamic Jitter Buffer Optimization Factor. Dynamic jitter buffer frame error/delay optimization. 0 - 12 (default =7) |
| INT dSPCount | 1.3.6.1.4.1.5003.9.10.1.2.4 | INTEGER | read-only | DSP Count |
| INT eCE | 1.3.6.1.4.1.5003.9.10.1.3.2.1.1.3 | INTEGER | read-only | Enable/Disable Echo Canceler |
| INT eCHybridLoss | 1.3.6.1.4.1.5003.9.10.1.3.2.1.1.13 | INTEGER | read-only | Echo Cancler Hybrid Loss. sets the worst case ratio between the signal level transmitted to the hybrid and the echo level returning from the hybrid. User should set this value according to the worst hybrid in the system in terms of echo return loss according to enum TECHybridLoss enumeration |
| INT eCLength | 1.3.6.1.4.1.5003.9.10.1.3.2.1.1.12 | INTEGER | read-only | Length of echo canceler tail to be used according to TECLength enumeration. Note that EC length has different length limitations for different boards. |
| INT enableDiagnostics | 1.3.6.1.4.1.5003.9.10.1.1.3.1 | INTEGER | read-write | The EnableDiagnostics checks the correct functionality of different hardware components on the board. Upon completion, the board sends EV_END_BIT which contains information on the results of the test of each hardware component. |
| OCT endPointName | 1.3.6.1.4.1.5003.9.10.1.1.5.9 | OCTET STRING | read-write | MGCP: Gateway's end point name. This is a prefix used to identify the endpoint, i.e., 'ACgw' in the following example: 'ACgw5@acl.com'. MEGACO: Prefix of the endpoint part of the termination name |
| INT enhancedFaxRelayRedundancyDepth | 1.3.6.1.4.1.5003.9.10.1.3.3.1.1.13 | INTEGER | read-only | Enhanced Fax Relay Redundancy Depth Number of repetitions to be applied to control packets when using T.38 standard. |
| INT externalClk | 1.3.6.1.4.1.5003.9.10.1.1.7.3 | INTEGER | read-write | Source clock of on the board UTOPIA bus |
| INT faxModemBypassCoderType | 1.3.6.1.4.1.5003.9.10.1.3.3.1.1.16 | INTEGER | read-only | Fax Modem Bypass Coder Type Coder to be used while performing fax/modem bypass. Usually, high bit rate coders such as G.711 and G.726/G.727 should be used. (Default = G.711 A-law). |
| INT faxModemBypassM | 1.3.6.1.4.1.5003.9.10.1.3.3.1.1.17 | INTEGER | read-only | Fax Modem Bypass M Number of 20 msec payloads to be used for generating one RTP fax/modem bypass packet. Range: 1 - Until max Tx/Rx buffer size is reached |
| INT faxModemRelayVolume | 1.3.6.1.4.1.5003.9.10.1.3.3.1.1.15 | INTEGER | read-only | Fax Modem Relay Volume Fax gain control. Range: -18 - 15 corresponding to -18.5 dBm to -3.5 dBm in 1 dB steps. The reason the range extends to 15 is for backward compatibility. (Default =6). |
| faxModemSettings | 1.3.6.1.4.1.5003.9.10.1.3.3 | |||
| faxModemSettingsEntry | 1.3.6.1.4.1.5003.9.10.1.3.3.1.1 | not-accessible | ||
| faxModemSettingsTable | 1.3.6.1.4.1.5003.9.10.1.3.3.1 | not-accessible | Data in faxModem Settings Table uniquely identify fax and modem parameters channel. | |
| INT faxRelayECMEnable | 1.3.6.1.4.1.5003.9.10.1.3.3.1.1.10 | INTEGER | read-only | Fax Relay ECM Enable Enable using ECM mode during Fax Relay. |
| INT faxRelayMaxRate | 1.3.6.1.4.1.5003.9.10.1.3.3.1.1.8 | INTEGER | read-only | Fax Relay Max Rate Limits the maximum rate at which fax messages are transmitted. Refer to acTFaxModemRelayRate enumeration. (Default =14400 bps). |
| INT faxRelayRedundancyDepth | 1.3.6.1.4.1.5003.9.10.1.3.3.1.1.12 | INTEGER | read-only | Fax Relay Redundancy Depth Number of repetitions to be applied to each fax relay payload when transmitting to network (applicable only when acTFaxModemCmdacTFaxModemSettings.T38FaxRelayProtectionMode=0). |
| INT fAXTransportType | 1.3.6.1.4.1.5003.9.10.1.3.3.1.1.1 | INTEGER | read-only | FAX Transport Type. |
| INT framingMethod | 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.3 | INTEGER | read-write | Selects the Framing method to be used for this trunk. |
| INT fXSorFXO | 1.3.6.1.4.1.5003.9.10.1.4.1.1.17 | INTEGER | read-only | returns the type phisical type of endpoint |
| OCT gateWayName | 1.3.6.1.4.1.5003.9.10.1.1.5.8 | OCTET STRING | read-write | GateWay Name |
| INT hPFE | 1.3.6.1.4.1.5003.9.10.1.3.2.1.1.6 | INTEGER | read-only | High Pass Filter Enabled of the voice coder |
| INT idleABCD | 1.3.6.1.4.1.5003.9.10.1.1.1.6 | INTEGER | read-write | ABCD (CAS) Pattern to be applied to CAS signaling bus before changed by the user or PSTN protocol. This is only relevant when using PSTN interface with CAS protocols. |
| INT idlePCMPattern | 1.3.6.1.4.1.5003.9.10.1.1.1.5 | INTEGER | read-write | PCM Pattern applied to E1/T1 timeslot (B-channel) when channel is idle. |
| INT iniFileVersion | 1.3.6.1.4.1.5003.9.10.1.2.10 | INTEGER | read-only | Ini file version. |
| INT inputGain | 1.3.6.1.4.1.5003.9.10.1.3.2.1.1.9 | INTEGER | read-only | PCM input gain sets the gain at the encoder�s input. |
| INT iPPrecedence | 1.3.6.1.4.1.5003.9.10.1.3.7.1.1.2 | INTEGER | read-only | IP Precedence. Sets the value of the IP precedence field in the IP header for all the packets to be generated from this channel. Follow the acTIPPrecedence enumeration. Valid Range: 0-7 (default =0) |
| INT iPTOS | 1.3.6.1.4.1.5003.9.10.1.3.7.1.1.3 | INTEGER | read-only | iP Type Of Service. sets the value of the IP Type Of Service field in the IP header for all the packets to be generated from this channel. acNormalServiceTOS=0, acMinimizeMonetaryCostTOS=1, acMaximizeReliabilityTOS=2, acMaximizeThroughputTOS=4, acMinimizeDelayTOS=8 (Follow the acTIPTOS enumeration). |
| INT jitterBufAccumDelay | 1.3.6.1.4.1.5003.9.10.1.4.1.1.16 | INTEGER | read-only | Jitter Buffer accumulation Delay. In packets. |
| INT jitterBufErrorCnt | 1.3.6.1.4.1.5003.9.10.1.4.1.1.11 | INTEGER | read-only | Jitter Buffer Forced Packet count |
| INT jitterBufForcedPacketAddition | 1.3.6.1.4.1.5003.9.10.1.4.1.1.13 | INTEGER | read-only | Jitter Buffer Forced Packet Addition |
| INT jitterBufForcedPacketLost | 1.3.6.1.4.1.5003.9.10.1.4.1.1.12 | INTEGER | read-only | Jitter Buffer Forced Packet Lost |
| INT jitterBufOverRunCnt | 1.3.6.1.4.1.5003.9.10.1.4.1.1.15 | INTEGER | read-only | Jitter Buffer Over-Run Counter |
| INT jitterBufUnderRunCnt | 1.3.6.1.4.1.5003.9.10.1.4.1.1.14 | INTEGER | read-only | Jitter Buffer Under-Run Counter |
| INT lineBuildOutLoss | 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.8 | INTEGER | read-write | Selects the line build out loss to be used for this trunk |
| INT lineBuildOutOverwrite | 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.9 | INTEGER | read-write | Overwrite the framer's XPM registers values (these registers control the line pulse shape). |
| INT lineBuildOutXPM0 | 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.10 | INTEGER | read-write | Controls the Framer's XPM0 register value (line pulse shape control). Applicable only when TrunkConfig.LineBuildOut.Overwrite=1.Should be used only by expert Users. |
| INT lineBuildOutXPM1 | 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.11 | INTEGER | read-write | Controls the Framer's XPM1 register value (line pulse shape control). Applicable only when TrunkConfig.LineBuildOut.Overwrite=1. Should be used only by expert Users. |
| INT lineBuildOutXPM2 | 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.12 | INTEGER | read-write | Controls the Framer's XPM2 register value (line pulse shape control). Applicable only when TrunkConfig.LineBuildOut.Overwrite=1.Should be used only by expert Users. |
| INT lineCode | 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.7 | INTEGER | read-write | Use to select line code. B8ZS or AMI for T1 spans and HDB3 or AMI for E1 spans. |
| INT localRTPPort | 1.3.6.1.4.1.5003.9.10.1.3.7.1.1.4 | INTEGER | read-only | Local RTP Port. Local UDP Port to be used for incoming RTP stream to this channel. This parameter also sets the local RTCP and local T.38 ports in offset of 1,2 from LocalRTPPort respectively. The local RTP port must be a number dividable by 10 and must reside within the following range BoardParams.BaseUDPPort-> BoardParams.BaseUDPPort +10*MAX_CID_NUM. |
| INT m | 1.3.6.1.4.1.5003.9.10.1.3.2.1.1.10 | INTEGER | read-only | This Packet Multiply Factor is the Number of 20 msec payloads (30 msec for G.723) to be used for generating one RTP packet. Range: 1 - Until max Tx/Rx buffer size is reached |
| INT masterSlaveMode | 1.3.6.1.4.1.5003.9.10.1.1.7.13 | INTEGER | read-write | Loop Emulation Mode (vmoa145) Master/Slave mode |
| OCT megacoActiveCallAgentIp | 1.3.6.1.4.1.5003.9.10.1.1.13.5 | OCTET STRING | read-only | Megaco Active Call Agent |
| INT megacoActiveCallAgentPort | 1.3.6.1.4.1.5003.9.10.1.1.13.6 | INTEGER | read-only | Megaco Active Port |
| INT megacoCallAgentId | 1.3.6.1.4.1.5003.9.10.1.1.13.7.1.1.1 | INTEGER | read-only | Megaco Call Agent Id |
| OCT megacoCallAgentIp | 1.3.6.1.4.1.5003.9.10.1.1.13.7.1.1.2 | OCTET STRING | read-write | Megaco CallAgent IP |
| INT megacoCallAgentIsUsed | 1.3.6.1.4.1.5003.9.10.1.1.13.7.1.1.4 | INTEGER | read-write | Is this index used |
| INT megacoCallAgentPort | 1.3.6.1.4.1.5003.9.10.1.1.13.7.1.1.3 | INTEGER | read-write | List of up to 10 UDP Ports of MEGACO Call Agent separated by , or ;. |
| megacoCallAgents | 1.3.6.1.4.1.5003.9.10.1.1.13.7 | |||
| megacoCallAgentsEntry | 1.3.6.1.4.1.5003.9.10.1.1.13.7.1.1 | not-accessible | ||
| megacoCallAgentsTable | 1.3.6.1.4.1.5003.9.10.1.1.13.7.1 | not-accessible | Magaco Call agents Table | |
| INT megacoCheckLegalityOfMGC | 1.3.6.1.4.1.5003.9.10.1.1.13.8 | INTEGER | read-write | This parameter specified if the MEGACO will reject commands from an MGC not in the provisioned list |
| INT megacoCurrentProfile | 1.3.6.1.4.1.5003.9.10.1.1.13.1 | INTEGER | read-write | Use this parameter to MGCP/MEGACO beheviour for specific compatibility. See user manual. |
| OCT megacoEndpointName | 1.3.6.1.4.1.5003.9.10.1.1.13.3 | OCTET STRING | read-write | Megaco Endpoint Name |
| OCT megacoGatewayName | 1.3.6.1.4.1.5003.9.10.1.1.13.2 | OCTET STRING | read-write | MGCP:Gateway's identification name towards the MGCP Call Agent. If empty Gateway name holds the IP address of the board MEGACO: Prefix of the gateway part of the termination name |
| megacoSettings | 1.3.6.1.4.1.5003.9.10.1.1.13 | |||
| OCT megacoTrunkName | 1.3.6.1.4.1.5003.9.10.1.1.13.4 | OCTET STRING | read-write | MGCP: Together with 'EndpointPrefix' field generates local endpoint name on trunk enabled gateways MEGACO: Prefix of the trunk part of the termination name |
| INT mGCPCommunicationLayerTimeout | 1.3.6.1.4.1.5003.9.10.1.1.5.10 | INTEGER | read-write | Assumed delay of the communication layer. It is used in retransmission. |
| mGCPSettings | 1.3.6.1.4.1.5003.9.10.1.1.5 | |||
| INT modemRelayMaxRate | 1.3.6.1.4.1.5003.9.10.1.3.3.1.1.9 | INTEGER | read-only | Modem Relay Max Rate Limits the maximum rate at which modem relay messages are transmitted. Refer to acTFaxModemRelayRate enumeration. (Default =14400 bps). |
| INT modemRelayRedundancyDepth | 1.3.6.1.4.1.5003.9.10.1.3.3.1.1.14 | INTEGER | read-only | Modem Relay Redundancy Depth Number of repetitions to be applied to each modem relay payload when transmitting to network. |
| INT multyPhy | 1.3.6.1.4.1.5003.9.10.1.1.7.6 | INTEGER | read-write | UTOPIA interface SinglePhy or MultiPhy mode |
| networkSettings | 1.3.6.1.4.1.5003.9.10.1.1.2 | |||
| notifications | 1.3.6.1.4.1.5003.9.10.1.5 | |||
| INT packetsToDSPCnt | 1.3.6.1.4.1.5003.9.10.1.4.1.1.10 | INTEGER | read-only | Jitter Buffer Error Counter |
| INT pCMLawSelect | 1.3.6.1.4.1.5003.9.10.1.1.1.1 | INTEGER | read-write | Selects the type of PCM companding law in input/output TDM bus (TDM bus is defined using the TDMBusType parameter). |
| INT pendingIdle | 1.3.6.1.4.1.5003.9.10.1.4.1.1.3 | INTEGER | read-only | Pending Idle |
| INT pFE | 1.3.6.1.4.1.5003.9.10.1.3.2.1.1.5 | INTEGER | read-only | Post Filter Enable of the voice coder |
| INT pHYClkSource | 1.3.6.1.4.1.5003.9.10.1.1.7.11 | INTEGER | read-write | OC3 Tx clock source |
| INT protocolType | 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.4 | INTEGER | read-write | Protocol Type. Sets the PSTN protocol to be used for this trunk. The protocol type parameter defines the interface and the specific telephony protocol. Each protocol defines the following: 1. E1 or T1 physical line configuration. 2. Fixed connection of the relevant time-slots, which are the Trunks' B-channels, mapping to the 60 (128 for TrunkPack�-VoIP/400) DSP channels. This limitation is about to change in versions higher than 3.4. 3. Layer 3 specific telephony protocol or transparent mode of operation. Currently only identical configurations (protocol type, framing method, etc.) for the two trunks are supported.(see at the TrunkPack�-VoIP User Manual for available protocols families) relevant only when TDMBusType=FRAMERS. |
| IP redundantAgentIP | 1.3.6.1.4.1.5003.9.10.1.1.5.4 | IpAddress | read-write | Redundant MGCP call agent IP address for initial RestartInProgress MGCP message (RSIP) e.g. 192.10.1.255. Set to 0 to avoid sending RSIP. |
| INT redundantAgentPort | 1.3.6.1.4.1.5003.9.10.1.1.5.5 | INTEGER | read-write | UDP Port of Redundant MGCP call agent. |
| OCT redundantCallAgentDomainName | 1.3.6.1.4.1.5003.9.10.1.1.5.6 | OCTET STRING | read-write | Redundant MGCP Call Agent Domain name |
| INT remoteReset | 1.3.6.1.4.1.5003.9.10.1.6.1 | INTEGER | read-write | remote Reset. To remote reset the board, set an integer value to this parameter. Note: Before Reset, The current boardConfiguration parameters will be burned to the board. |
| INT remoteResetControl | 1.3.6.1.4.1.5003.9.10.1.6.7 | INTEGER | read-write | Determine the remote reset action 1 - burn staged load image, if any, and config to flash, perform a reset, and load from flash 2 - perform a reset, and load from flash (staged load image, if any, and config is not burned to flash) 3 - perform a reset, and load from bootp/tftp (staged load image, if any, and config burn is not needed) * - an error is returned for any other value Note: The staged load image is an image of a cmp file that was previously loaded to a area in RAM via an HTTP upload |
| IP remoteRTPAddr | 1.3.6.1.4.1.5003.9.10.1.3.7.1.1.5 | IpAddress | read-only | Remote RTP Address |
| INT remoteRTPPort | 1.3.6.1.4.1.5003.9.10.1.3.7.1.1.6 | INTEGER | read-only | IP/UDP Address of the remote endpoint RTP port |
| IP remoteT38Addr | 1.3.6.1.4.1.5003.9.10.1.3.7.1.1.7 | IpAddress | read-only | remote T38 Address |
| INT remoteT38Port | 1.3.6.1.4.1.5003.9.10.1.3.7.1.1.8 | INTEGER | read-only | IP/UDP Address of the remote endpoint T.38 port |
| reset | 1.3.6.1.4.1.5003.9.10.1.6 | |||
| INT rTCPMeanTxInterval | 1.3.6.1.4.1.5003.9.10.1.3.7.1.1.9 | INTEGER | read-only | RTCP Mean Tx Interval. Mean interval [msec] between channel's RTCP reports. |
| INT rTPActive | 1.3.6.1.4.1.5003.9.10.1.4.1.1.1 | INTEGER | read-only | RTP Active |
| INT rTPRedundancyDepth | 1.3.6.1.4.1.5003.9.10.1.3.2.1.1.11 | INTEGER | read-only | RTP Redundancy Depth. Number of repetitions to be applied to each RTP payload when transmitting to network. apply redundancy sequence per RFC2198. Valid range: Disable redundancy packets generation = 0. Enable generation of RFC2198 redundancy packets = 1. |
| rTPRTCPSettings | 1.3.6.1.4.1.5003.9.10.1.3.7 | |||
| rTPRTCPSettingsEntry | 1.3.6.1.4.1.5003.9.10.1.3.7.1.1 | not-accessible | ||
| rTPRTCPSettingsTable | 1.3.6.1.4.1.5003.9.10.1.3.7.1 | not-accessible | Data in RTP-RTCP Table, uniquely identify RTP-RTCP sparameters of channel. | |
| INT rxDTMFPeriod | 1.3.6.1.4.1.5003.9.10.1.4.1.1.9 | INTEGER | read-only | Rx DTMF Period |
| INT rxFaxMode | 1.3.6.1.4.1.5003.9.10.1.4.1.1.7 | INTEGER | read-only | Rx Fax Mode |
| INT rxRTPPayloadType | 1.3.6.1.4.1.5003.9.10.1.3.7.1.1.10 | INTEGER | read-only | Rx RTP Payload Type -1 = use the default coder RTP payload type for incoming voice packets. -2 = allow any RTP payload type for incoming packets. Otherwise, = sets the RTP payload type to be used for incoming voice packets (this will override the default RTP payload type defined for each coder). Valid Range: -1/-2 or any unoccupied RTPPT in the range 0-127 . (default =-1). |
| INT rxSilencePeriod | 1.3.6.1.4.1.5003.9.10.1.4.1.1.5 | INTEGER | read-only | Rx Silence Period |
| INT sAALLink0VCI | 1.3.6.1.4.1.5003.9.10.1.1.7.18 | INTEGER | read-write | VCI of the 1st SAAL link (number 0) |
| INT sAALLink0VPI | 1.3.6.1.4.1.5003.9.10.1.1.7.17 | INTEGER | read-write | VPI of the 1st SAAL link (number 0) |
| INT sAALLink1VCI | 1.3.6.1.4.1.5003.9.10.1.1.7.20 | INTEGER | read-write | VCI of the 1st SAAL link (number 1) |
| INT sAALLink1VPI | 1.3.6.1.4.1.5003.9.10.1.1.7.19 | INTEGER | read-write | VPI of the 2nd SAAL link (number 1) |
| INT sCE | 1.3.6.1.4.1.5003.9.10.1.3.2.1.1.4 | INTEGER | read-only | Enable/Disable Silence Compresion mechanism |
| INT sendIdleCASUponLinkFail | 1.3.6.1.4.1.5003.9.10.1.1.7.12 | INTEGER | read-write | This I.366.2 allows sending a special idle CAS packet which signals that the other side has a failure |
| INT serialNum | 1.3.6.1.4.1.5003.9.10.1.2.3 | INTEGER | read-only | serial number of board. |
| INT slavePhyNum | 1.3.6.1.4.1.5003.9.10.1.1.7.7 | INTEGER | read-write | Provides the slave number for this device (board) in the UTOPIA system bus (Applies to slave mode only) |
| INT slotNumber | 1.3.6.1.4.1.5003.9.10.1.2.9 | INTEGER | read-only | Slot number |
| INT snmpManagerIndex | 1.3.6.1.4.1.5003.9.10.1.1.2.21.1.1.1 | INTEGER | read-only | Snmp Manager Index |
| IP snmpManagerIp | 1.3.6.1.4.1.5003.9.10.1.1.2.21.1.1.3 | IpAddress | read-write | IP address of default SNMP manager in dotted notation format: xxx.xxx.xxx.xxx. SNMP traps are sent to this manager. |
| INT snmpManagerIsUsed | 1.3.6.1.4.1.5003.9.10.1.1.2.21.1.1.2 | INTEGER | read-write | Enable the SNMP Manager to recieve traps. |
| snmpManagers | 1.3.6.1.4.1.5003.9.10.1.1.2.21 | |||
| snmpManagersEntry | 1.3.6.1.4.1.5003.9.10.1.1.2.21.1.1 | not-accessible | ||
| snmpManagersTable | 1.3.6.1.4.1.5003.9.10.1.1.2.21.1 | not-accessible | Snmp Managers Table | |
| INT snmpManagerTrapPort | 1.3.6.1.4.1.5003.9.10.1.1.2.21.1.1.4 | INTEGER | read-write | Sets the trap ports to be used by the different managers. |
| INT snmpManagerTrapSendingEnable | 1.3.6.1.4.1.5003.9.10.1.1.2.21.1.1.5 | INTEGER | read-write | Enable the SNMP Manager to recieve traps. |
| OCT softwareVersion | 1.3.6.1.4.1.5003.9.10.1.2.7 | OCTET STRING | read-only | TrunkPack Software Version |
| supplementary | 1.3.6.1.4.1.5003.9.10.1.1.99 | |||
| OCT supplementaryField | 1.3.6.1.4.1.5003.9.10.1.1.99.1 | OCTET STRING | read-write | Flexible INI file line. |
| INT t38FaxRelayProtectionMode | 1.3.6.1.4.1.5003.9.10.1.3.3.1.1.11 | INTEGER | read-only | T38 Fax Relay Protection Mode Use Forward Error Correction (FEC) algorithm to protect T.38 fax relay stream. |
| INT tDMBusClockSource | 1.3.6.1.4.1.5003.9.10.1.1.1.2 | INTEGER | read-write | Selects the clock source on which the board synchronizes |
| INT tDMBusEnableFallBack | 1.3.6.1.4.1.5003.9.10.1.1.1.3 | INTEGER | read-write | Enable/Disable clock fallback. The Fall Back clock is determined by BSPTDMBusFallbackClock |
| INT tDMBusInputChannel | 1.3.6.1.4.1.5003.9.10.1.3.5.1.1.2 | INTEGER | read-only | TDM Bus Input Channel. Together with TDMBusInputPort, defines the TDM bus timeslot to be used as input for this channel. Note that the valid region for this parameter varies according to the TDMBusSpeed. When using TDMBusType=acFramers, this parameter selects the incoming B-channel (in this case the valid region is 0-31). |
| INT tDMBusInputPort | 1.3.6.1.4.1.5003.9.10.1.3.5.1.1.1 | INTEGER | read-only | TDM Bus Input Port. Together with TDMBusInputChannel, defines the TDM bus timeslot to be used as input for this channel. Note that the valid region for this parameter varies according to the type of TDM bus used. When using TDMBusType=acFramers this parameter selects the trunkID, in which the incoming B-channel resides. 0-127. |
| INT tDMBusLocalReference | 1.3.6.1.4.1.5003.9.10.1.1.1.4 | INTEGER | read-write | When ClockSource is set to acH110BusClockSource_Network this parameter selects the TrunkID to be used as the clock synchronization source of the board. When using H.110/H.100 bus this parameter also selects the trunk which is used as the clock source for the NETREF clock generation (in this case ClockSource might not be set to acH110BusClockSource_Network). |
| INT tDMBusMasterSlaveSelection | 1.3.6.1.4.1.5003.9.10.1.1.1.7 | INTEGER | read-write | Set SC/MVIP/H.110 to either: Master mode (the board is the clock source for the TDM bus) or Slave mode (some other board in the system must supply the clock to the TDM bus). |
| INT tDMBusNetRefSpeed | 1.3.6.1.4.1.5003.9.10.1.1.1.8 | INTEGER | read-write | Determine the NetRef frequency (for both generation and synchronization). |
| INT tDMBusOutputChannel | 1.3.6.1.4.1.5003.9.10.1.3.5.1.1.5 | INTEGER | read-only | TDM Bus Output Channel. Together with TDMBusOutputPort, defines the TDM bus timeslot to be used as output for this channel. Note that the valid region for this parameter varies according to the TDMBusSpeed. When using TDMBusType=acFramers, this parameter is ignored. |
| INT tDMBusOutputDisable | 1.3.6.1.4.1.5003.9.10.1.3.5.1.1.3 | INTEGER | read-only | TDM Bus Output Disable. 0: Places TDM bus output timeslot in tri-state mode. Ignored in case of PSTN interface. 1: Enables TDM bus output timeslot. Ignored in case of PSTN interface. |
| INT tDMBusOutputPort | 1.3.6.1.4.1.5003.9.10.1.3.5.1.1.4 | INTEGER | read-only | TDM Bus Output Port. Together with TDMBusOutputChannel, defines the TDM bus timeslot to be used as output for this channel. Note that the valid region for this parameter varies according to the type of TDM bus used. When this parameter is set to 0xff=255 the boardwise setting (set in acOpenBoard()) will be used. When using TDMBusType=acFramers, this parameter is ignored. 0-31 or 255. |
| INT tDMBusOutputStartingChannel | 1.3.6.1.4.1.5003.9.10.1.1.1.9 | INTEGER | read-write | Defines the outgoing TDM Timeslot of the first channel (ChannelId=0). The remaining channels are organized sequentially. |
| INT tDMBusSpeed | 1.3.6.1.4.1.5003.9.10.1.1.1.11 | INTEGER | read-write | Selects the TDM Bus Speed. Speed is set according to the Bus Type. The following are allowed speeds for each bus type: SC = 0/2/3 H.110/H.100 = 3 MVIP = 0 |
| INT tDMBusType | 1.3.6.1.4.1.5003.9.10.1.1.1.12 | INTEGER | read-write | Selects the TDM bus interface to be used (only one TDM bus interface can be enabled at one time although more than one can physically exist on the board). |
| INT terminationSide | 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.5 | INTEGER | read-write | For ISDN only. select the ISDN Termination side (layer 2) |
| INT testMode | 1.3.6.1.4.1.5003.9.10.1.3.2.1.1.7 | INTEGER | read-only | Testing mode to be applied. Valid Range:CoderLoopback will perform an encoder-decoder loopback inside the DSP device, PCMLoopback will loopback the incoming PCM to the outgoing PCM, ToneInjection will generate a1000 Hz tone to outgoing PCM and NoLoopback will set the channel to work in a normal mode. Refer to TTestCode enumeration (default =3= NoLoopBack). |
| INT tPNCPVCI | 1.3.6.1.4.1.5003.9.10.1.1.7.16 | INTEGER | read-write | VCI used for transferring TPNCP command over AAL5 transport layer |
| INT tPNCPVPI | 1.3.6.1.4.1.5003.9.10.1.1.7.15 | INTEGER | read-write | VPI used for transferring TPNCP command over AAL5 transport layer |
| INT traceLevel | 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.13 | INTEGER | read-write | Defines the Protocol Trace level |
| transportSettings | 1.3.6.1.4.1.5003.9.10.1.3.6 | |||
| transportSettingsEntry | 1.3.6.1.4.1.5003.9.10.1.3.6.1.1 | not-accessible | ||
| transportSettingsTable | 1.3.6.1.4.1.5003.9.10.1.3.6.1 | not-accessible | Data in Transport Table, uniquely identify Transport sparameters of channel. | |
| INT trunkId | 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.1 | INTEGER | read-only | Trunk ID at board in which the call is taking place |
| OCT trunkPackSoftwareDate | 1.3.6.1.4.1.5003.9.10.1.2.8 | OCTET STRING | read-only | TrunkPack Software Date |
| trunkSettings | 1.3.6.1.4.1.5003.9.10.1.1.4 | |||
| trunkSettingsEntry | 1.3.6.1.4.1.5003.9.10.1.1.4.1.1 | not-accessible | ||
| trunkSettingsTable | 1.3.6.1.4.1.5003.9.10.1.1.4.1 | not-accessible | Trunks Table | |
| INT txDTMFPeriod | 1.3.6.1.4.1.5003.9.10.1.4.1.1.8 | INTEGER | read-only | Tx DTMF Period |
| INT txFaxMode | 1.3.6.1.4.1.5003.9.10.1.4.1.1.6 | INTEGER | read-only | Tx Fax Mode |
| INT txRTPPayloadType | 1.3.6.1.4.1.5003.9.10.1.3.7.1.1.11 | INTEGER | read-only | Tx RTP Payload Type -1 = use the default coder RTP payload type for incoming voice packets. -2 = allow any RTP payload type for incoming packets. Otherwise, = sets the RTP payload type to be used for incoming voice packets (this will override the default RTP payload type defined for each coder). Valid Range: -1/-2 or any unoccupied RTPPT in the range 0-127. (default =-1). |
| INT txSilencePeriod | 1.3.6.1.4.1.5003.9.10.1.4.1.1.4 | INTEGER | read-only | Tx Silence Period |
| INT uniDirectionalRTP | 1.3.6.1.4.1.5003.9.10.1.3.6.1.1.3 | INTEGER | read-only | uni Directional RTP. enables one sided RTP stream - according to niDirectionalRTPMode. enables the User to set the channel to work with unidirectional RTP streams. When UniDirectionalRTP is set to acRTPTxOnly, the receiver part of the channel will be disabled, and only the transmitter (encoder) will work. When UniDirectionalRTP is set to acRTPRxOnly, the transmitter part of the channel will be disabled, and only the receiver (decoder) will work. When UniDirectionalRTP is set to acRTPTxRx, both sides will be enabled. Users should note that when configuring a session between two endpoints, some of the channel configuration parameters must be identical on both sides. Such parameters are the voice coder type, the Fax/Modem transport type and bypass coders. All other configuration parameters are independent. |
| INT useNIorPCI | 1.3.6.1.4.1.5003.9.10.1.3.6.1.1.1 | INTEGER | read-only | Description: Use NI or PCI interface. =1 if channel will use NI interface, =0 if PCI interface. 0- PCI interface: Compressed traffic will be sent/received through the PCI interface. 1- NI interface: RTP-RTCP packets sent/received to/from on board Ethernet interface. (default=1). |
| INT useT38orFRF11 | 1.3.6.1.4.1.5003.9.10.1.3.3.1.1.18 | INTEGER | read-only | Use T38 or FRF11 Use T.38 protocol or proprietary FRF.11 syntax, to send/receive fax relay. |
| INT utopiaBus16 | 1.3.6.1.4.1.5003.9.10.1.1.7.8 | INTEGER | read-write | UTOPIA interface mode of bus width |
| INT utopiaSlave | 1.3.6.1.4.1.5003.9.10.1.1.7.5 | INTEGER | read-write | UTOPIA interface mode of bus arbitration |
| INT v21ModemTransportType | 1.3.6.1.4.1.5003.9.10.1.3.3.1.1.3 | INTEGER | read-only | V21 Modem Transpor tType. |
| INT v22ModemTransportType | 1.3.6.1.4.1.5003.9.10.1.3.3.1.1.4 | INTEGER | read-only | V22 Modem Transpor tType. |
| INT v23ModemTransportType | 1.3.6.1.4.1.5003.9.10.1.3.3.1.1.5 | INTEGER | read-only | V23 Modem Transpor tType. |
| INT v32ModemTransportType | 1.3.6.1.4.1.5003.9.10.1.3.3.1.1.6 | INTEGER | read-only | V32 Modem Transpor tType. |
| INT v34ModemTransportType | 1.3.6.1.4.1.5003.9.10.1.3.3.1.1.7 | INTEGER | read-only | V34 Modem Transpor tType. |
| INT vccProfile | 1.3.6.1.4.1.5003.9.10.1.1.7.14 | INTEGER | read-write | Determine the required combination of Board's maximal number of VCC and maximal number of channels per VCC |
| INT vCMask | 1.3.6.1.4.1.5003.9.10.1.1.7.2 | INTEGER | read-write | VC masking bits used for address resolution |
| voiceSettings | 1.3.6.1.4.1.5003.9.10.1.3.2 | |||
| voiceSettingsEntry | 1.3.6.1.4.1.5003.9.10.1.3.2.1.1 | not-accessible | ||
| voiceSettingsTable | 1.3.6.1.4.1.5003.9.10.1.3.2.1 | not-accessible | Data in voice SettingsTable uniquely identify a voice parameters of channel. | |
| INT voiceVolume | 1.3.6.1.4.1.5003.9.10.1.3.2.1.1.8 | INTEGER | read-only | Voice Volume sets the voice decoder�s output gain Range: 0-63 corresponding to -31 dB to +31 dB in 1 dB steps |
| INT vPMask | 1.3.6.1.4.1.5003.9.10.1.1.7.1 | INTEGER | read-write | VP masking bits used for address resolution |
RFC description
Manages AudioCodes board configuration, monitoring, and remote reset operations. Provides channel status, QoS metrics, and DSP statistics.
Start monitoring AudioCodes media/VoIP gateways with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.