All MIBs › AVAYA-WLAN-MOB-SW-MIB
Organization: Avaya
Last Updated: 2010-06-09
Category: Vendor: Avaya, Wireless and WLAN
Description: Manages Avaya WLAN mobility switch fabric, covering AP tunnel establishment and client roaming across mobility domains.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is AVAYA-WLAN-MOB-SW-MIB?
AVAYA-WLAN-MOB-SW-MIB is an Avaya proprietary MIB (built on the SynOptics-heritage SYNOPTICS-ROOT-MIB) configuring wireless mobility (Layer 3 roaming) on Avaya WLAN mobility switches. Its VLAN table records name, local VLAN ID, Layer-3-mobility enable, weight, tracking, scope, wireless-controller-validated flag, admin-mapped state, active flag, and row status, while global objects cover VLAN periodic-advertisement interval, VMM (Virtual Mobility Manager) max retransmits, keepalive interval/retries, transaction max retransmits, local device ID, statistics-reset action/status, controller address, and mobility/access-tunnel counts. As a configuration/status MIB it lets an administrator confirm a mobility VLAN's Layer 3 roaming settings and watch active tunnel counts. It is deployed on Avaya WLAN mobility switches. Engineers can download the AVAYA-WLAN-MOB-SW-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in AVAYA-WLAN-MOB-SW-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Avaya WLAN mobility switches
Monitoring Examples
An administrator checks avWlanMobAgentVlanL3Mobility to confirm Layer 3 roaming is enabled for a mobility VLAN before troubleshooting a client that loses connectivity while roaming between subnets on an Avaya WLAN switch.
What Can Be Monitored
- mobility VLAN configuration and tunnel counts
This MIB depends on
Related MIBs
Imported Objects
From HCNUM-TC
| CounterBasedGauge64 |
From INET-ADDRESS-MIB
| InetAddress | |
| InetAddressType | |
| InetPortNumber |
From Q-BRIDGE-MIB
| PortList | |
| VlanIdOrNone |
From SNMP-FRAMEWORK-MIB
| SnmpAdminString |
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| Integer32 | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| MacAddress | |
| RowStatus | |
| TruthValue |
From SYNOPTICS-ROOT-MIB
| avayaWlanMibs | OBJECT-IDENTITY |
How to Use in IPNetwork Monitor
Example using avWlanMobSwNumMobilityTunnels OID:
Select an Avaya WLAN mobility switch (legacy) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type avWlanMobSwNumMobilityTunnels into the Find box to locate it in the OID tree, then select it and click OK. The current number of Mobility tunnels establisted on this switch. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| avayaWlanMobSwMib | 1.3.6.1.4.1.45.7.10 | Avaya WLAN Mobility Switch MIB Copyright 2010 Avaya, Inc. All rights reserved. This Avaya SNMP Management Information Base Specification (Specification) embodies Avaya's confidential and proprietary intellectual property. Avaya retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS,' and Avaya makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. | ||
| avWlanMobAgentObjects | 1.3.6.1.4.1.45.7.10.1.1 | |||
| T/F avWlanMobAgentVlanActive | 1.3.6.1.4.1.45.7.10.1.1.1.1.9 | TruthValue | read-only | Indicates whether the LVID mapping is in 'Active' state. For mapping to be 'Active', the following conditions have to be satisfied: - Mobility VLAN has to be received from (validated by) WC. - LVID element has to be mapped a value other than 0. - LVID has to represent a valid local VLAN on this switch. |
| T/F avWlanMobAgentVlanAdminMapped | 1.3.6.1.4.1.45.7.10.1.1.1.1.8 | TruthValue | read-only | Indicates whether the LVID mapping for this entry was set by admin or auto-assigned by the switch itself. Has no meaning if the LVID value is 0 |
| avWlanMobAgentVlanEntry | 1.3.6.1.4.1.45.7.10.1.1.1.1 | not-accessible | Configuration settings for a mobility VLAN. | |
| INT avWlanMobAgentVlanL3Mobility | 1.3.6.1.4.1.45.7.10.1.1.1.1.3 | INTEGER | read-create | This object indicates the L3 mobility mode for the VLAN. The meaning of the values is: none(1) - L3 mobility is not enabled for this VLAN (L2 mobility is supported, which is the default behaviour when a VLAN is mapped). server(2) - L3 mobility is enabled for this VLAN, and this switch can act as a server for this mobility VLAN. The rest of the parameters for the VLAN are valid. client(3) - L3 mobility is enabled for this VLAN, and this switch is configured as a static client for this VLAN. All ports in the mapped Local VLAN will be remotely connected to this mobility VLAN. |
| VLA avWlanMobAgentVlanLVID | 1.3.6.1.4.1.45.7.10.1.1.1.1.2 | VlanIdOrNone | read-create | The local VLAN ID. This maps the global VLAN to a locally defined VLAN. |
| STR avWlanMobAgentVlanName | 1.3.6.1.4.1.45.7.10.1.1.1.1.1 | SnmpAdminString | not-accessible | This object uniquely identifies a mobility VLAN. |
| ROW avWlanMobAgentVlanRowStatus | 1.3.6.1.4.1.45.7.10.1.1.1.1.10 | RowStatus | read-create | This variable is used to create or delete entries in the table. Only the entries manually added offline that have not (yet) been 'validated' by the managing Controller can be deleted from this table. |
| INT avWlanMobAgentVlanScope | 1.3.6.1.4.1.45.7.10.1.1.1.1.6 | INTEGER | read-create | for future use |
| avWlanMobAgentVlanTable | 1.3.6.1.4.1.45.7.10.1.1.1 | not-accessible | This is the configuration table for mobility VLANs. | |
| POR avWlanMobAgentVlanTrack | 1.3.6.1.4.1.45.7.10.1.1.1.1.5 | PortList | read-create | The objects specifies a list of ports whose status will be tracked to determine the priority used to elect the VLAN server for this VLAN. This list must be a subset of the member ports of the local VLAN mapped to this mobility VLAN. The default value for this object is the complete set of member ports of the local VLAN. |
| T/F avWlanMobAgentVlanWcValidated | 1.3.6.1.4.1.45.7.10.1.1.1.1.7 | TruthValue | read-only | Indicates whether the Mobility VLAN name for this entry was received from (and thus validated by) the managing controller. Mostly useful for validating mappings that were manually added offline before the switch associated to the controller. |
| U32 avWlanMobAgentVlanWeight | 1.3.6.1.4.1.45.7.10.1.1.1.1.4 | Unsigned32 | read-create | This object specifies a weight value to be used to compute the priority used to determine the winning server amongst a number of switches configured as server for this VLAN. |
| avWlanMobPeerVlansAdvertisedEntry | 1.3.6.1.4.1.45.7.10.1.4.1 | not-accessible | A mobility vlan advertised by a peer mobility switch. | |
| MAC avWlanMobPeerVlansAdvertisedId | 1.3.6.1.4.1.45.7.10.1.4.1.1 | MacAddress | not-accessible | The MAC address that uniquely identifies the peer mobility switch. |
| U32 avWlanMobPeerVlansAdvertisedPriority | 1.3.6.1.4.1.45.7.10.1.4.1.3 | Unsigned32 | read-only | This object indicates the priority of the advertised mobility VLAN. |
| avWlanMobPeerVlansAdvertisedTable | 1.3.6.1.4.1.45.7.10.1.4 | not-accessible | This table contains a list of the Mobility VLANs that are advertised by each peer Mobility Switch with which the local mobility switch has established a mobility tunnel. | |
| STR avWlanMobPeerVlansAdvertisedVlanName | 1.3.6.1.4.1.45.7.10.1.4.1.2 | SnmpAdminString | not-accessible | This object indicates the name of the advertised mobility VLAN. |
| INT avWlanMobSwAllStatisticsReset | 1.3.6.1.4.1.45.7.10.1.2.7 | INTEGER | read-write | When we set this object to reset, all the statistics for every tunnel will be cleared. Read on this object will always return none. |
| INT avWlanMobSwAllStatisticsResetStatus | 1.3.6.1.4.1.45.7.10.1.2.8 | INTEGER | read-only | This object indicates the current status of the switch statistics reset request. Default value is not started. |
| IP avWlanMobSwControllerAddr | 1.3.6.1.4.1.45.7.10.1.9.1.3 | InetAddress | read-create | The internet address of the configured Controller IP address. The type of address contained in this object is indicated by the corresponding instance of avWlanMobSwControllerAddrType. |
| IPt avWlanMobSwControllerAddrType | 1.3.6.1.4.1.45.7.10.1.9.1.2 | InetAddressType | read-create | The type of internet address contained in the corresponding instance of avWlanMobSwControllerAddr. Currently only ipv4(1) and ipv6(2) are allowed. |
| avWlanMobSwControllerEntry | 1.3.6.1.4.1.45.7.10.1.9.1 | not-accessible | Entry containing configuration information for a particular Controller. | |
| I32 avWlanMobSwControllerId | 1.3.6.1.4.1.45.7.10.1.9.1.1 | Integer32 | not-accessible | Index into the table. |
| ROW avWlanMobSwControllerRowStatus | 1.3.6.1.4.1.45.7.10.1.9.1.4 | RowStatus | read-create | This variable is used to create or delete entries in the table. |
| avWlanMobSwControllerTable | 1.3.6.1.4.1.45.7.10.1.9 | not-accessible | The table defines System IPs of the Controllers for this switch. The controllers are used in the round robin fashion. | |
| IP avWlanMobSwCtrlAddr | 1.3.6.1.4.1.45.7.10.1.2.10 | InetAddress | read-only | The System internet address of the controller that is managing this mobility switch. The type of address contained in this object is indicated by the corresponding instance of avWlanMobSwCtrlAddrType. |
| IPt avWlanMobSwCtrlAddrType | 1.3.6.1.4.1.45.7.10.1.2.9 | InetAddressType | read-only | The type of internet address contained in the corresponding instance of avWlanMobSwCtrlAddr. Currently only ipv4(1) and ipv6(2) are allowed. |
| IP avWlanMobSwDeviceAddr | 1.3.6.1.4.1.45.7.10.1.3.1.4 | InetAddress | read-only | The address of the peer mobility switch or access point. The type of address is indicated by the corresponding instance of avWlanMobSwDeviceAddrType. |
| IPt avWlanMobSwDeviceAddrType | 1.3.6.1.4.1.45.7.10.1.3.1.3 | InetAddressType | read-only | This object indicates the type of internet address in the corresponding instance of avWlanMobSwDeviceAddr. Currently, only the values ipv4(1) and ipv6(2) are allowed. |
| avWlanMobSwDeviceEntry | 1.3.6.1.4.1.45.7.10.1.3.1 | not-accessible | A peer mobility switch or an access point. | |
| MAC avWlanMobSwDeviceId | 1.3.6.1.4.1.45.7.10.1.3.1.2 | MacAddress | not-accessible | The MAC address that uniquely identifies the peer mobility switch or access point on the other side of the tunnel. |
| I32 avWlanMobSwDeviceInterfaceId | 1.3.6.1.4.1.45.7.10.1.3.1.8 | Integer32 | read-only | Used to display Logical Port for the tunnel. |
| INE avWlanMobSwDeviceLocalUdpPort | 1.3.6.1.4.1.45.7.10.1.3.1.7 | InetPortNumber | read-only | Indicates the local UDP port through which the current Mobility Tunnel(or Resiliency Tunnel) or Access Tunnel is connected. |
| INT avWlanMobSwDeviceStatus | 1.3.6.1.4.1.45.7.10.1.3.1.6 | INTEGER | read-only | Indicates the status of the mobility tunnel connection to this peer mobility switch, or the access tunnel to this access point. |
| avWlanMobSwDeviceTable | 1.3.6.1.4.1.45.7.10.1.3 | not-accessible | Despite the somewhat misleading name, this table contains status entries of the Access and Mobility tunnels that are established at the local switch. | |
| INT avWlanMobSwDeviceType | 1.3.6.1.4.1.45.7.10.1.3.1.1 | INTEGER | not-accessible | The tunnel type. |
| INE avWlanMobSwDeviceUdpPort | 1.3.6.1.4.1.45.7.10.1.3.1.5 | InetPortNumber | read-only | Indicates the UDP port which the peer mobility switch or access point will use for control protocol communication with the local switch. |
| avWlanMobSwFdbEntry | 1.3.6.1.4.1.45.7.10.1.10.1 | not-accessible | Information about a specific unicast MAC address for which the mobility switch has forwarding information. | |
| INT avWlanMobSwFdbFlushAction | 1.3.6.1.4.1.45.7.10.1.10.1.11 | INTEGER | read-write | When this object is set to flush(2), the FDB entry learned by mobility switch will be flushed. Read on this object will always return none(1). |
| INT avWlanMobSwFdbGlobalFlushAction | 1.3.6.1.4.1.45.7.10.1.2.14 | INTEGER | read-write | When we set this object to flushAll(2), all the FDB entries learned by mobility switch will be flushed. Read on this object will always return none. |
| INT avWlanMobSwFdbGlobalFlushActionStatus | 1.3.6.1.4.1.45.7.10.1.2.15 | INTEGER | read-only | This object indicates the current status of flushing all fdb entries learned by the mobility swithc request. Default value is not started. |
| I32 avWlanMobSwFdbInterfaceId | 1.3.6.1.4.1.45.7.10.1.10.1.10 | Integer32 | read-only | Used to display Logical Port for the tunnel. |
| INE avWlanMobSwFdbLocalEndpointUdpPort | 1.3.6.1.4.1.45.7.10.1.10.1.9 | InetPortNumber | read-only | Indicates the UDP port used by the local end point of the tunnel. |
| MAC avWlanMobSwFdbMacAddress | 1.3.6.1.4.1.45.7.10.1.10.1.2 | MacAddress | not-accessible | A unicast MAC address for which the mobility switch has forwarding and/or filtering information. |
| IP avWlanMobSwFdbRemoteEndpointAddr | 1.3.6.1.4.1.45.7.10.1.10.1.7 | InetAddress | read-only | The address of the remote end point(mobility switch or access point). The type of address is indicated by the corresponding instance of avWlanMobSwRemoteEndPointAddrType. |
| IPt avWlanMobSwFdbRemoteEndpointAddrType | 1.3.6.1.4.1.45.7.10.1.10.1.6 | InetAddressType | read-only | This object indicates the type of internet address of the FDB entry's remote end point . |
| MAC avWlanMobSwFdbRemoteEndpointId | 1.3.6.1.4.1.45.7.10.1.10.1.5 | MacAddress | read-only | The MAC address of the FDB entry's remote end point. |
| INE avWlanMobSwFdbRemoteEndpointUdpPort | 1.3.6.1.4.1.45.7.10.1.10.1.8 | InetPortNumber | read-only | Indicates the UDP port used by the remote end point of the tunnel. |
| avWlanMobSwFdbTable | 1.3.6.1.4.1.45.7.10.1.10 | not-accessible | This table contains FDB entries for wireless traffic. | |
| INT avWlanMobSwFdbTunnelType | 1.3.6.1.4.1.45.7.10.1.10.1.4 | INTEGER | read-only | This indicates the type of the tunnel the entry is learned on |
| INT avWlanMobSwFdbType | 1.3.6.1.4.1.45.7.10.1.10.1.3 | INTEGER | read-only | This object indicates the type of this entry other(1) - invalid(2) - learned(3) - self(4) - static(5) - |
| VLA avWlanMobSwFdbVlanId | 1.3.6.1.4.1.45.7.10.1.10.1.1 | VlanIdOrNone | not-accessible | Local VLAN ID |
| U32 avWlanMobSwKeepAliveInterval | 1.3.6.1.4.1.45.7.10.1.2.3 | Unsigned32 | read-write | Keep alive interval. |
| U32 avWlanMobSwKeepAliveNumRetries | 1.3.6.1.4.1.45.7.10.1.2.4 | Unsigned32 | read-write | Kepp alive number of retries. |
| MAC avWlanMobSwLocalDeviceId | 1.3.6.1.4.1.45.7.10.1.2.6 | MacAddress | read-only | This object contains the MAC address that uniquely identifies the local mobility switch. This value is what is used to identify this switch in peer switches and controllers, and is used as an index value in various MIBs to identify entries that pertain to the local switch. |
| C32 avWlanMobSwNumAccessTunnels | 1.3.6.1.4.1.45.7.10.1.2.12 | Counter32 | read-only | The current number of Access tunnels establisted on this switch. |
| C32 avWlanMobSwNumMobilityTunnelsEx | 1.3.6.1.4.1.45.7.10.1.2.11 | Counter32 | read-only | The current number of Mobility tunnels establisted on this switch. |
| C32 avWlanMobSwNumResPeerAccessTunnels | 1.3.6.1.4.1.45.7.10.1.2.13 | Counter32 | read-only | The current number of Access tunnels establisted on this switch that are managed by its resiliency peer. Initially intended for switches running as SMLT pairs. |
| avWlanMobSwObjects | 1.3.6.1.4.1.45.7.10.1 | |||
| INT avWlanMobSwPurgeInactiveMaps | 1.3.6.1.4.1.45.7.10.1.2.16 | INTEGER | read-write | Setting this object would purge all the inactive mappings from the mobility agent vlan table (avWlanMobAgentVlanTable) ie entries whose value of avWlanMobAgentVlanActive is False. Read from this field always returns none (1). |
| avWlanMobSwScalars | 1.3.6.1.4.1.45.7.10.1.2 | |||
| U32 avWlanMobSwTransMaxRetransmits | 1.3.6.1.4.1.45.7.10.1.2.5 | Unsigned32 | read-write | Trans max retransmits. |
| C64 avWlanMobSwTunnelEgressBcast | 1.3.6.1.4.1.45.7.10.1.8.1.21 | Counter64 | read-only | Broadcast packets egressing on the tunnel. |
| NUM avWlanMobSwTunnelEgressDataRate | 1.3.6.1.4.1.45.7.10.1.8.1.35 | CounterBasedGauge64 | read-only | Data rate of egress traffic over the past second. |
| C64 avWlanMobSwTunnelEgressDropped | 1.3.6.1.4.1.45.7.10.1.8.1.24 | Counter64 | read-only | Total packets dropped on the egress due to e.g. rate limiting or vlan filtering. |
| C64 avWlanMobSwTunnelEgressError | 1.3.6.1.4.1.45.7.10.1.8.1.23 | Counter64 | read-only | Total packets with errors sent on tunnel. |
| C64 avWlanMobSwTunnelEgressFragments | 1.3.6.1.4.1.45.7.10.1.8.1.32 | Counter64 | read-only | Total number of CAPWAP fragments transmitted. |
| C64 avWlanMobSwTunnelEgressKeepAliveReq | 1.3.6.1.4.1.45.7.10.1.8.1.33 | Counter64 | read-only | Total keep alive requests transmitted from this tunnel. |
| C64 avWlanMobSwTunnelEgressKeepAliveRsp | 1.3.6.1.4.1.45.7.10.1.8.1.34 | Counter64 | read-only | Total keep alive responses transmitted from this tunnel. |
| C64 avWlanMobSwTunnelEgressMcast | 1.3.6.1.4.1.45.7.10.1.8.1.20 | Counter64 | read-only | Multicast packets egressing on the tunnel. |
| C64 avWlanMobSwTunnelEgressOctets | 1.3.6.1.4.1.45.7.10.1.8.1.22 | Counter64 | read-only | Total octets egressing on the tunnel. |
| C64 avWlanMobSwTunnelEgressPkts | 1.3.6.1.4.1.45.7.10.1.8.1.19 | Counter64 | read-only | Total packets egressing on the tunnel. |
| C64 avWlanMobSwTunnelEgressPkts1024to1518 | 1.3.6.1.4.1.45.7.10.1.8.1.30 | Counter64 | read-only | Total 1024 byte to 1518 byte packets egressing on the tunnel. |
| C64 avWlanMobSwTunnelEgressPkts128to255 | 1.3.6.1.4.1.45.7.10.1.8.1.27 | Counter64 | read-only | Total 128 byte to 255 byte packets egressing on the tunnel. |
| C64 avWlanMobSwTunnelEgressPkts1522to9216 | 1.3.6.1.4.1.45.7.10.1.8.1.31 | Counter64 | read-only | Jumbo frame egressing on the tunnel. |
| C64 avWlanMobSwTunnelEgressPkts256to511 | 1.3.6.1.4.1.45.7.10.1.8.1.28 | Counter64 | read-only | Total 256 byte to 511 byte packets egressing on the tunnel. |
| C64 avWlanMobSwTunnelEgressPkts512to1023 | 1.3.6.1.4.1.45.7.10.1.8.1.29 | Counter64 | read-only | Total 512 byte to 1023 byte packets egressing on the tunnel. |
| C64 avWlanMobSwTunnelEgressPkts64 | 1.3.6.1.4.1.45.7.10.1.8.1.25 | Counter64 | read-only | Total 64 byte packets egressing on the tunnel. |
| C64 avWlanMobSwTunnelEgressPkts65to127 | 1.3.6.1.4.1.45.7.10.1.8.1.26 | Counter64 | read-only | Total 65 byte to 127 byte packets egressing on the tunnel. |
| C64 avWlanMobSwTunnelIngressBcast | 1.3.6.1.4.1.45.7.10.1.8.1.3 | Counter64 | read-only | Broadcasts recvd on the tunnel. |
| NUM avWlanMobSwTunnelIngressDataRate | 1.3.6.1.4.1.45.7.10.1.8.1.18 | CounterBasedGauge64 | read-only | Data rate of ingress traffic over the past second. |
| C64 avWlanMobSwTunnelIngressDropped | 1.3.6.1.4.1.45.7.10.1.8.1.6 | Counter64 | read-only | Total packets that were dropped by ingress processing - e.g. incorrect vlan or WDP disabled or rate limited. |
| C64 avWlanMobSwTunnelIngressError | 1.3.6.1.4.1.45.7.10.1.8.1.5 | Counter64 | read-only | Total packets with errors recvd on tunnel. |
| C64 avWlanMobSwTunnelIngressFragments | 1.3.6.1.4.1.45.7.10.1.8.1.14 | Counter64 | read-only | Total CAPWAP fragments ingressing on the tunnel. |
| C64 avWlanMobSwTunnelIngressFragmentsDrop | 1.3.6.1.4.1.45.7.10.1.8.1.15 | Counter64 | read-only | Total number of CAPWAP fragments dropped because they could not be re-assembled. |
| C64 avWlanMobSwTunnelIngressKeepAliveReq | 1.3.6.1.4.1.45.7.10.1.8.1.16 | Counter64 | read-only | Total keep alive requests received on this tunnel. |
| C64 avWlanMobSwTunnelIngressKeepAliveRsp | 1.3.6.1.4.1.45.7.10.1.8.1.17 | Counter64 | read-only | Total keep alive responses received on this tunnel. |
| C64 avWlanMobSwTunnelIngressMcast | 1.3.6.1.4.1.45.7.10.1.8.1.2 | Counter64 | read-only | Multicast packets recvd on the tunnel. |
| C64 avWlanMobSwTunnelIngressOctets | 1.3.6.1.4.1.45.7.10.1.8.1.4 | Counter64 | read-only | Total octets recvd on the tunnel. |
| C64 avWlanMobSwTunnelIngressPkts | 1.3.6.1.4.1.45.7.10.1.8.1.1 | Counter64 | read-only | Total packets received on the tunnel. |
| C64 avWlanMobSwTunnelIngressPkts1024to1518 | 1.3.6.1.4.1.45.7.10.1.8.1.12 | Counter64 | read-only | Total number of 1024 byte to 1518 byte packets recvd. |
| C64 avWlanMobSwTunnelIngressPkts128to255 | 1.3.6.1.4.1.45.7.10.1.8.1.9 | Counter64 | read-only | Total number of 128 byte to 255 byte packets recvd. |
| C64 avWlanMobSwTunnelIngressPkts1522to9216 | 1.3.6.1.4.1.45.7.10.1.8.1.13 | Counter64 | read-only | Jumbo frames ingressing on the tunnel. |
| C64 avWlanMobSwTunnelIngressPkts256to511 | 1.3.6.1.4.1.45.7.10.1.8.1.10 | Counter64 | read-only | Total number of 256 byte to 511 byte packets recvd. |
| C64 avWlanMobSwTunnelIngressPkts512to1023 | 1.3.6.1.4.1.45.7.10.1.8.1.11 | Counter64 | read-only | Total number of 512 byte to 1023 byte packets recvd. |
| C64 avWlanMobSwTunnelIngressPkts64 | 1.3.6.1.4.1.45.7.10.1.8.1.7 | Counter64 | read-only | Total number of 64 byte packets received on tunnel. |
| C64 avWlanMobSwTunnelIngressPkts65to127 | 1.3.6.1.4.1.45.7.10.1.8.1.8 | Counter64 | read-only | Total number of 65 byte to 127 byte packets received on the tunnel. |
| I32 avWlanMobSwTunnelInterfaceId | 1.3.6.1.4.1.45.7.10.1.8.1.39 | Integer32 | read-only | Used to display Logical Port for the tunnel. |
| IP avWlanMobSwTunnelIpAddress | 1.3.6.1.4.1.45.7.10.1.8.1.38 | InetAddress | read-only | This object contains the IP address that will be used to display Wireless LAN switch tunnel. |
| IPt avWlanMobSwTunnelIpAddressType | 1.3.6.1.4.1.45.7.10.1.8.1.37 | InetAddressType | read-only | This object indicates the type of internet address in the corresponding instance of rcWlanMobSwTunnelIPAddress. Currently, only the values ipv4(1) and ipv6(2) are allowed. |
| INT avWlanMobSwTunnelResetStats | 1.3.6.1.4.1.45.7.10.1.8.1.36 | INTEGER | read-write | This is an action object. When this object is set to reset(2), statistics for the tunnel will be cleared. Read on this object always returns none(1). |
| avWlanMobSwTunnelStatisticsEntry | 1.3.6.1.4.1.45.7.10.1.8.1 | not-accessible | Each entry in this table contain statistics available for each mobility/access tunnel established at the switch. | |
| avWlanMobSwTunnelStatisticsTable | 1.3.6.1.4.1.45.7.10.1.8 | not-accessible | This table contains statistics for each mobility/access tunnel. | |
| U32 avWlanMobSwVLANPeriodicAdvInterval | 1.3.6.1.4.1.45.7.10.1.2.1 | Unsigned32 | read-write | Period for sending VLAN advertisements. |
| U32 avWlanMobSwVMMMaxRetransmits | 1.3.6.1.4.1.45.7.10.1.2.2 | Unsigned32 | read-write | VMM max retransmits. |
| MAC avWlanMobTunnelStatsDeviceId | 1.3.6.1.4.1.45.7.10.1.7.1.1 | MacAddress | not-accessible | This object identifies the peer mobility switch to which this tunnel is connected. |
| C64 avWlanMobTunnelStatsEgressBcast | 1.3.6.1.4.1.45.7.10.1.7.1.22 | Counter64 | read-only | Broadcast packets egressing on the tunnel. |
| NUM avWlanMobTunnelStatsEgressDataRate | 1.3.6.1.4.1.45.7.10.1.7.1.36 | CounterBasedGauge64 | read-only | Data rate of egress traffic over the past second. |
| C64 avWlanMobTunnelStatsEgressDropped | 1.3.6.1.4.1.45.7.10.1.7.1.25 | Counter64 | read-only | Total packets dropped on the egress due to e.g. rate limiting or vlan filtering. |
| C64 avWlanMobTunnelStatsEgressError | 1.3.6.1.4.1.45.7.10.1.7.1.24 | Counter64 | read-only | Total packets with errors sent on tunnel. |
| C64 avWlanMobTunnelStatsEgressFragments | 1.3.6.1.4.1.45.7.10.1.7.1.33 | Counter64 | read-only | Total number of CAPWAP fragments transmitted. |
| C64 avWlanMobTunnelStatsEgressKeepAliveReq | 1.3.6.1.4.1.45.7.10.1.7.1.34 | Counter64 | read-only | Total keep alive requests transmitted from this tunnel. |
| C64 avWlanMobTunnelStatsEgressKeepAliveRsp | 1.3.6.1.4.1.45.7.10.1.7.1.35 | Counter64 | read-only | Total keep alive responses transmitted from this tunnel. |
| C64 avWlanMobTunnelStatsEgressMcast | 1.3.6.1.4.1.45.7.10.1.7.1.21 | Counter64 | read-only | Multicast packets egressing on the tunnel. |
| C64 avWlanMobTunnelStatsEgressOctets | 1.3.6.1.4.1.45.7.10.1.7.1.23 | Counter64 | read-only | Total octets egressing on the tunnel. |
| C64 avWlanMobTunnelStatsEgressPkts | 1.3.6.1.4.1.45.7.10.1.7.1.20 | Counter64 | read-only | Total packets egressing on the tunnel. |
| C64 avWlanMobTunnelStatsEgressPkts1024to1518 | 1.3.6.1.4.1.45.7.10.1.7.1.31 | Counter64 | read-only | Total 1024 byte to 1518 byte packets egressing on the tunnel. |
| C64 avWlanMobTunnelStatsEgressPkts128to255 | 1.3.6.1.4.1.45.7.10.1.7.1.28 | Counter64 | read-only | Total 128 byte to 255 byte packets egressing on the tunnel. |
| C64 avWlanMobTunnelStatsEgressPkts1522to9216 | 1.3.6.1.4.1.45.7.10.1.7.1.32 | Counter64 | read-only | Jumbo frame egressing on the tunnel. |
| C64 avWlanMobTunnelStatsEgressPkts256to511 | 1.3.6.1.4.1.45.7.10.1.7.1.29 | Counter64 | read-only | Total 256 byte to 511 byte packets egressing on the tunnel. |
| C64 avWlanMobTunnelStatsEgressPkts512to1023 | 1.3.6.1.4.1.45.7.10.1.7.1.30 | Counter64 | read-only | Total 512 byte to 1023 byte packets egressing on the tunnel. |
| C64 avWlanMobTunnelStatsEgressPkts64 | 1.3.6.1.4.1.45.7.10.1.7.1.26 | Counter64 | read-only | Total 64 byte packets egressing on the tunnel. |
| C64 avWlanMobTunnelStatsEgressPkts65to127 | 1.3.6.1.4.1.45.7.10.1.7.1.27 | Counter64 | read-only | Total 65 byte to 127 byte packets egressing on the tunnel. |
| avWlanMobTunnelStatsEntry | 1.3.6.1.4.1.45.7.10.1.7.1 | not-accessible | mobility/access tunnel statistics | |
| C64 avWlanMobTunnelStatsIngressBcast | 1.3.6.1.4.1.45.7.10.1.7.1.4 | Counter64 | read-only | Broadcasts recvd on the tunnel. |
| NUM avWlanMobTunnelStatsIngressDataRate | 1.3.6.1.4.1.45.7.10.1.7.1.19 | CounterBasedGauge64 | read-only | Data rate of ingress traffic over the past second. |
| C64 avWlanMobTunnelStatsIngressDropped | 1.3.6.1.4.1.45.7.10.1.7.1.7 | Counter64 | read-only | Total packets that were dropped by ingress processing - e.g. incorrect vlan or WDP disabled or rate limited. |
| C64 avWlanMobTunnelStatsIngressError | 1.3.6.1.4.1.45.7.10.1.7.1.6 | Counter64 | read-only | Total packets with errors recvd on tunnel. |
| C64 avWlanMobTunnelStatsIngressFragments | 1.3.6.1.4.1.45.7.10.1.7.1.15 | Counter64 | read-only | Total CAPWAP fragments ingressing on the tunnel. |
| C64 avWlanMobTunnelStatsIngressFragmentsDrop | 1.3.6.1.4.1.45.7.10.1.7.1.16 | Counter64 | read-only | Total number of CAPWAP fragments dropped because they could not be re-assembled. |
| C64 avWlanMobTunnelStatsIngressKeepAliveReq | 1.3.6.1.4.1.45.7.10.1.7.1.17 | Counter64 | read-only | Total keep alive requests received on this tunnel. |
| C64 avWlanMobTunnelStatsIngressKeepAliveRsp | 1.3.6.1.4.1.45.7.10.1.7.1.18 | Counter64 | read-only | Total keep alive responses received on this tunnel. |
| C64 avWlanMobTunnelStatsIngressMcast | 1.3.6.1.4.1.45.7.10.1.7.1.3 | Counter64 | read-only | Multicast packets recvd on the tunnel. |
| C64 avWlanMobTunnelStatsIngressOctets | 1.3.6.1.4.1.45.7.10.1.7.1.5 | Counter64 | read-only | Total octets recvd on the tunnel. |
| C64 avWlanMobTunnelStatsIngressPkts | 1.3.6.1.4.1.45.7.10.1.7.1.2 | Counter64 | read-only | Total packets received on the tunnel. |
| C64 avWlanMobTunnelStatsIngressPkts1024to1518 | 1.3.6.1.4.1.45.7.10.1.7.1.13 | Counter64 | read-only | Total number of 1024 byte to 1518 byte packets recvd. |
| C64 avWlanMobTunnelStatsIngressPkts128to255 | 1.3.6.1.4.1.45.7.10.1.7.1.10 | Counter64 | read-only | Total number of 128 byte to 255 byte packets recvd. |
| C64 avWlanMobTunnelStatsIngressPkts1522to9216 | 1.3.6.1.4.1.45.7.10.1.7.1.14 | Counter64 | read-only | Jumbo frames ingressing on the tunnel. |
| C64 avWlanMobTunnelStatsIngressPkts256to511 | 1.3.6.1.4.1.45.7.10.1.7.1.11 | Counter64 | read-only | Total number of 256 byte to 511 byte packets recvd. |
| C64 avWlanMobTunnelStatsIngressPkts512to1023 | 1.3.6.1.4.1.45.7.10.1.7.1.12 | Counter64 | read-only | Total number of 512 byte to 1023 byte packets recvd. |
| C64 avWlanMobTunnelStatsIngressPkts64 | 1.3.6.1.4.1.45.7.10.1.7.1.8 | Counter64 | read-only | Total number of 64 byte packets received on tunnel. |
| C64 avWlanMobTunnelStatsIngressPkts65to127 | 1.3.6.1.4.1.45.7.10.1.7.1.9 | Counter64 | read-only | Total number of 65 byte to 127 byte packets received on the tunnel. |
| INT avWlanMobTunnelStatsReset | 1.3.6.1.4.1.45.7.10.1.7.1.37 | INTEGER | read-write | This is an action object. When this object is set to reset(2), statistics for the tunnel will be cleared. Read on this object always returns none(1). |
| avWlanMobTunnelStatsTable | 1.3.6.1.4.1.45.7.10.1.7 | not-accessible | This table contains statistics for each mobility tunnel. | |
| avWlanMobVlanPeerAdvertiserEntry | 1.3.6.1.4.1.45.7.10.1.6.1 | not-accessible | A mobility switch that is advertising a particular mobility vlan. | |
| MAC avWlanMobVlanPeerAdvertiserId | 1.3.6.1.4.1.45.7.10.1.6.1.2 | MacAddress | not-accessible | This object identifies a peer mobility switch that is advertising this mobility vlan. Note that the internet address and status of this peer can be retrieved from the corresponding entry in the avWlanMobSwDeviceTable. |
| U32 avWlanMobVlanPeerAdvertiserPriority | 1.3.6.1.4.1.45.7.10.1.6.1.3 | Unsigned32 | read-only | This object indicates the priority of the VLAN. |
| avWlanMobVlanPeerAdvertiserTable | 1.3.6.1.4.1.45.7.10.1.6 | not-accessible | This table contains a list of all peer mobility switches that are advertising each mobility vlan. | |
| STR avWlanMobVlanPeerAdvertiserVlanName | 1.3.6.1.4.1.45.7.10.1.6.1.1 | SnmpAdminString | not-accessible | This object identifies the mobility vlan. |
| avWlanMobVlanServerEntry | 1.3.6.1.4.1.45.7.10.1.5.1 | not-accessible | A mobility vlan advertised by a peer mobility switch. | |
| MAC avWlanMobVlanServerId | 1.3.6.1.4.1.45.7.10.1.5.1.2 | MacAddress | read-only | This object identifies the currently selected server for this mobility vlan. Note that the internet address and status of this server can be retrieved from the corresponding entry in the avWlanMobSwDeviceTable. |
| U32 avWlanMobVlanServerPriority | 1.3.6.1.4.1.45.7.10.1.5.1.3 | Unsigned32 | read-only | This object indicates the priority of the VLAN. |
| avWlanMobVlanServerTable | 1.3.6.1.4.1.45.7.10.1.5 | not-accessible | This table contains the currently selected server for each mobility vlan. | |
| STR avWlanMobVlanServerVlanName | 1.3.6.1.4.1.45.7.10.1.5.1.1 | SnmpAdminString | not-accessible | This object identifies the mobility vlan. |
RFC description
Manages Avaya WLAN mobility switch configuration and VLAN mobility for wireless networks.
Start monitoring Avaya WLAN mobility switches (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.