| OID symbolic | OID numeric | Type | Access | Description |
|---|
| atNtp | 1.3.6.1.4.1.207.8.4.4.4.502 | | | This MIB file contains definitions of managed objects
for the Allied Telesis Network Time Protocol configuration. |
| INT atNtpPeerIndexNext | 1.3.6.1.4.1.207.8.4.4.4.502.6 | INTEGER | read-only | This object represents the next available value for
the object 'atNtpPeerIndex'.
For creation of a new entry in the 'atNtpPeerTable',
a management application should read this object,
get the value and use the same. |
| atNtpPeerTable | 1.3.6.1.4.1.207.8.4.4.4.502.7 | | not-accessible | This table contains information on the Network Time
Protocol (NTP) peers' configurations in the system. |
| atNtpPeerEntry | 1.3.6.1.4.1.207.8.4.4.4.502.7.1 | | not-accessible | A conceptual entry in atNtpPeerTable. |
| INT atNtpPeerIndex | 1.3.6.1.4.1.207.8.4.4.4.502.7.1.1 | INTEGER | not-accessible | This object represents the index corresponding to
a particular NTP server or peer configuration in
the system.
For creation of a new entry, the value of this object
should be same as that of the value of
'atNtpPeerIndexNext' object. If this is not
the case, then the entry creation will fail. |
| STR atNtpPeerNameAddr | 1.3.6.1.4.1.207.8.4.4.4.502.7.1.2 | DisplayString | read-write | This object represents host name, or the IP address,
of the NTP peer.
This object is a current object for row creation.
When a new row is created, this object is set with
a default value '0.0.0.0', and the management
application should change it to a desired value by
a SET operation. |
| INT atNtpPeerMode | 1.3.6.1.4.1.207.8.4.4.4.502.7.1.3 | INTEGER | read-write | This object represents the mode of the peer.
It's value is coded as follows:
server(1),
peer(2) |
| INT atNtpPeerPreference | 1.3.6.1.4.1.207.8.4.4.4.502.7.1.4 | INTEGER | read-write | This object specifies whether this peer is the
preferred one over the others.
It's value is encoded as follows:
0 - unknown
1 - not preferred
2 - preferred
When the value of this object is 'not preferred',
NTP chooses the peer with which to synchronize the
time on the local system. If this object is set to
'preferred', NTP will choose the corresponding peer to
synchronize the time with. |
| INT atNtpPeerVersion | 1.3.6.1.4.1.207.8.4.4.4.502.7.1.5 | INTEGER | read-write | This object represents the NTP version the peer
supports. It's value is encoded as follows:
0 - unknown
1 - version 1
2 - version 2
3 - version 3
4 - version 4 |
| U32 atNtpPeerKeyNumber | 1.3.6.1.4.1.207.8.4.4.4.502.7.1.6 | Unsigned32 | read-write | This object represents the authentication key number. |
| ROW atNtpPeerRowStatus | 1.3.6.1.4.1.207.8.4.4.4.502.7.1.7 | RowStatus | read-create | The status of this row.
The reading of this object should have a value of
'active(1)'.
For creation of new entry, a management application
should set this object with value 'createAndGo(4)',
and using the same value as that got from reading
object 'atNtpPeerIndexNext', as the index for
the new entry.
When an entry is created, the object 'atNtpPeerNameAddr'
in the entry is set with a default value '0.0.0.0'.
The management application should change it to
a desired value with a SET operation.
The management application may need to take
additional SET operations to set values for other
objects, to ensure they have desired values.
For deletion of entry, a management application
should set this object with value 'destroy(6)'.
Once an entry is deleted, other entries in the table
which have bigger index than the deleted one, will
be indexed again. Therefore a management
application can effectively delete multiple entries
by repeating the SET operation using the same index. |
| atNtpAssociationTable | 1.3.6.1.4.1.207.8.4.4.4.502.10 | | not-accessible | This table contains NTP association information. |
| atNtpAssociationEntry | 1.3.6.1.4.1.207.8.4.4.4.502.10.1 | | not-accessible | An conceptual entry in atNtpAssociationTable. |
| I32 atNtpAssociationIndex | 1.3.6.1.4.1.207.8.4.4.4.502.10.1.1 | Integer32 | not-accessible | This object represents the index corresponding to
a particular NTP association. |
| STR atNtpAssociationPeerAddr | 1.3.6.1.4.1.207.8.4.4.4.502.10.1.2 | DisplayString | read-only | This object represents the peer's IP address or host
name. |
| STR atNtpAssocaitionStatus | 1.3.6.1.4.1.207.8.4.4.4.502.10.1.3 | DisplayString | read-only | This object indicates the association's status.
It's value is defined as follows:
master(synced),
master(unsynced),
selected,
candidate,
configured,
unknown. |
| STR atNtpAssociationConfigured | 1.3.6.1.4.1.207.8.4.4.4.502.10.1.4 | DisplayString | read-only | This object indicates whether the association
is from configuration or not. It's value can be
either 'configured' or 'dynamic'. |
| STR atNtpAssociationRefClkAddr | 1.3.6.1.4.1.207.8.4.4.4.502.10.1.5 | DisplayString | read-only | This object indicates the IP address for the
reference clock. |
| I32 atNtpAssociationStratum | 1.3.6.1.4.1.207.8.4.4.4.502.10.1.6 | Integer32 | read-only | This object indicates the stratum of the peer clock. |
| I32 atNtpAssociationPoll | 1.3.6.1.4.1.207.8.4.4.4.502.10.1.7 | Integer32 | read-only | This object indicates the time between NTP requests
from the device to the server. |
| I32 atNtpAssociationReach | 1.3.6.1.4.1.207.8.4.4.4.502.10.1.8 | Integer32 | read-only | This object indicates the reachability status of
the peer. |
| STR atNtpAssociationDelay | 1.3.6.1.4.1.207.8.4.4.4.502.10.1.9 | DisplayString | read-only | This object indicates the round trip delay between
the device and the server. |
| STR atNtpAssociationOffset | 1.3.6.1.4.1.207.8.4.4.4.502.10.1.10 | DisplayString | read-only | This object indicates the difference between
the device clock and the server clock. |
| STR atNtpAssociationDisp | 1.3.6.1.4.1.207.8.4.4.4.502.10.1.11 | DisplayString | read-only | This object indicates the lowest measure of
error associated with peer offset based on delay,
in seconds. |
| atNtpStatus | 1.3.6.1.4.1.207.8.4.4.4.502.11 | | | |
| T/F atNtpSysClockSync | 1.3.6.1.4.1.207.8.4.4.4.502.11.1 | TruthValue | read-only | This object indicates whether the system clock
is synchronized. |
| I32 atNtpSysStratum | 1.3.6.1.4.1.207.8.4.4.4.502.11.2 | Integer32 | read-only | This object represents the stratum of the local clock. |
| STR atNtpSysReference | 1.3.6.1.4.1.207.8.4.4.4.502.11.3 | DisplayString | read-only | This object represents the current synchronization
source. |
| I32 atNtpSysFrequency | 1.3.6.1.4.1.207.8.4.4.4.502.11.4 | Integer32 | read-only | This object represents the actual clock frequency.
source. |
| I32 atNtpSysPrecision | 1.3.6.1.4.1.207.8.4.4.4.502.11.5 | Integer32 | read-only | Signed integer indicating the precision of the system clock,
in seconds to the nearest power of two. The value is rounded
to the next larger power of two; for instance, a 50-Hz(20 ms)
or 60-Hz (16.67 ms) power-frequency clock would be assigned
the value -5 (31.25 ms), while a 1000-Hz (1 ms) crystal-controlled
clock would be assigned the value -9 (1.95 ms). |
| OCT atNtpSysRefTime | 1.3.6.1.4.1.207.8.4.4.4.502.11.6 | OCTET STRING | read-only | This object indicates the local time when the
local clock was last updated. If the local clock
has never been synchronized, the value is zero |
| I32 atNtpSysClkOffset | 1.3.6.1.4.1.207.8.4.4.4.502.11.7 | Integer32 | read-only | This object indicates the offset of the local clock
relative to the server clock, in milliseconds. |
| I32 atNtpSysRootDelay | 1.3.6.1.4.1.207.8.4.4.4.502.11.8 | Integer32 | read-only | This object indicats the total round-trip delay
in milliseconds, to the primary reference source
at the root of the synchronization subnet. |
| I32 atNtpSysRootDisp | 1.3.6.1.4.1.207.8.4.4.4.502.11.9 | Integer32 | read-only | This object indicates the maximum error in
milliseconds, relative to the primary reference
source at the root of the synchronization
subnet. |
