ASCEND-SRVC-MGMT-MIB

All MIBs › ASCEND-SRVC-MGMT-MIB

Category: Device Management, Vendor: Ascend/Lucent

Description: Manages service profiles and subscriber service definitions on Ascend access equipment.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ASCEND-SRVC-MGMT-MIB?

ASCEND-SRVC-MGMT-MIB is an Ascend Communications (later Lucent) proprietary MIB managing DNIS (Dialed Number Identification Service) global policy on Ascend MAX 400x/600x-series remote-access equipment. Its objects cover a global DNIS-management enable flag (governing whether DNIS policy is centrally managed via SNMP versus per-profile local configuration) and a DNIS table recording phone number, status, accepted/dropped call counts, an action object, and a status-timeout. As a configuration/status MIB it lets an administrator confirm whether centralized DNIS management is active and watch accepted/dropped call counts per DNIS number. It is deployed on Ascend (Lucent) MAX 400x/600x remote-access equipment. Engineers can download the ASCEND-SRVC-MGMT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ASCEND-SRVC-MGMT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ascend (Lucent) MAX 400x/600x remote-access equipment

Monitoring Examples

An administrator checks dnisGlobalCallsDropped for a specific DNIS number to catch a dial-in service experiencing an unusual rate of rejected incoming calls on an Ascend MAX access server.

What Can Be Monitored

DNIS accepted/dropped call counts and global management state

Imported Objects

From ASCEND-MIB

srvcMgmtGroup

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
TimeTicks

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
dnisMgmt	1.3.6.1.4.1.529.26.1
INT dnisMgmtGlobalEnabled	1.3.6.1.4.1.529.26.1.1	INTEGER	read-write	This is to enable the DNIS global management. If the 'dnisGlobalEnabled' is set to true then the DNIS management is controlled by the policy set up on the Network Management station to manage the resource plant as a whole. If the 'dnisGlobalEnabled' is set to false, then the DNIS limitation is controlled by the policy set up in the local profile under Ethernet->Mod Config->DNIS options. Note that this option only exist on the MAX 400x/600x Series. As for TNT all incoming calls will be accepted.
INT dnisMgmtGlobalNumEntries	1.3.6.1.4.1.529.26.1.2	INTEGER	read-only	The number of entries present in the dnisGlobalTable.
TIK dnisMgmtGlobalLastChange	1.3.6.1.4.1.529.26.1.3	TimeTicks	read-only	The value of sysUpTime at the time of the last creation or deletion of an entry in the dnisMgmtGlobalTable. If the number of entries has been unchanged since the last re-initialization of the local network management subsystem, then this object contains a zero value.
dnisMgmtGlobalTable	1.3.6.1.4.1.529.26.1.4		not-accessible	This table contains one entry for each DNIS that has connected with a NAS.
dnisMgmtGlobalEntry	1.3.6.1.4.1.529.26.1.4.1		not-accessible	An entry in the DNIS Management global table.
INT dnisGlobalIndex	1.3.6.1.4.1.529.26.1.4.1.1	INTEGER	read-only	An unique value, greater than zero, for each DNIS phone number. The value ranges from 1 to 'dnisMgmtGlobalNumEntries' and identifies which DNIS phone number is associated with. It is recommended that the value are assigned continuously starting from 1. The value must remain constant at least from one re-intialization of the entity's network management system to the next re-intialization. Note: This attribute is no longer used as an index in this table. It always returns 1.
STR dnisGlobalPhoneNumber	1.3.6.1.4.1.529.26.1.4.1.2	DisplayString	read-only	4 to 24 digits number. The DNIS is the phone number dialed to access to the hunt group. This number is extracted from incoming calls or from dnisGlobalActioni. Note that if this number contains characters other than digits, the agent returns error.
INT dnisGlobalStatus	1.3.6.1.4.1.529.26.1.4.1.3	INTEGER	read-write	The status of this DNIS phone number. When set to enabled, calls on this DNIS will be answered. When set to disabled, calls will be dropped and the fast busy signal will be generated. Applied only when the dnisMgmtGlobalEnabled is set to true(1).
CTR dnisGlobalCallsAccepted	1.3.6.1.4.1.529.26.1.4.1.4	Counter	read-only	The number of calls that has been accepted by this DNIS.
CTR dnisGlobalCallsDropped	1.3.6.1.4.1.529.26.1.4.1.5	Counter	read-only	The number of calls that has been dropped by this DNIS.
INT dnisGlobalAction	1.3.6.1.4.1.529.26.1.4.1.6	INTEGER	read-write	To add/delete an entry (row) in the dnisGlobalTable.
TIK dnisGlobalStatusTimeout	1.3.6.1.4.1.529.26.1.4.1.7	TimeTicks	read-write	This timeout is applied to the dnis if its dnisGlobalStatus is set to disabled(2). After the timeout expires, this dnis changes its dnisGlobalStatus to enabled(1). This timeout may be set at any time, even if the previous one has not yet expired. If this timeout is not set by user at the time dnisGlobalStatus set to disabled(2), it is set to its default value. Note: When being read, this attribute shows the time interval remaining till expiration.

RFC description

Manages Ascend DNIS service policies and resource allocation for class of service provisioning.

Start monitoring Ascend (Lucent) MAX 400x/600x remote-access equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ASCEND-SRVC-MGMT-MIB

What Is ASCEND-SRVC-MGMT-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description