ASCEND-MIBSNMP-MIB

All MIBs › ASCEND-MIBSNMP-MIB

Category: SNMP Framework, Vendor: Ascend/Lucent

Description: Manages SNMP community strings, access control, and agent parameters on Ascend equipment.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ASCEND-MIBSNMP-MIB?

ASCEND-MIBSNMP-MIB is Ascend Communications' proprietary MIB for managing the SNMP agent itself on Ascend access/routing equipment, covering community strings, access control, and general agent parameters. Unlike most device MIBs, it exposes management-plane configuration rather than device telemetry: the objects it defines control who is allowed to query the device via SNMP and with what privileges. Its hardware/software status relevance is limited to confirming the SNMP agent's own configuration is correct, such as whether community strings and access lists are set as expected, rather than reporting on CPU, memory, or environmental sensors. It extends the standard SNMPv1 community-based security model defined in RFC 1157 with Ascend-specific configuration objects. It was deployed on Ascend MAX/Pipeline-style remote-access concentrators and routers used in dial/ISDN access networks. Network engineers evaluating or troubleshooting this functionality can download the ASCEND-MIBSNMP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ASCEND-MIBSNMP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ascend Communications remote access router/concentrator (e.g. MAX/Pipeline series)

Monitoring Examples

No sample objects were provided for this module, so a concrete polling scenario with real object names cannot be constructed; based on the module's stated purpose, a typical use would be verifying configured SNMP community strings and access-control entries match the intended management policy rather than monitoring any traffic or hardware counters.

What Can Be Monitored

SNMP community string configuration
SNMP access control list entries
SNMP agent parameter settings

Imported Objects

From ASCEND-MIB

configuration

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

IpAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
mibsnmpProfile	1.3.6.1.4.1.529.23.114
mibsnmpProfileTable	1.3.6.1.4.1.529.23.114.1		not-accessible	A list of mibsnmpProfile profile entries.
mibsnmpProfileEntry	1.3.6.1.4.1.529.23.114.1.1		not-accessible	A mibsnmpProfile entry containing objects that maps to the parameters of mibsnmpProfile profile.
INT snmpProfile_Index_o	1.3.6.1.4.1.529.23.114.1.1.1	INTEGER	read-only
INT snmpProfile_Enabled	1.3.6.1.4.1.529.23.114.1.1.2	INTEGER	read-write	When set to `no' (its default value), the unit cannot be accessed via SNMP.
STR snmpProfile_ReadCommunity	1.3.6.1.4.1.529.23.114.1.1.3	DisplayString	read-write	The SNMP community name for read access.
INT snmpProfile_ReadWriteEnabled	1.3.6.1.4.1.529.23.114.1.1.4	INTEGER	read-write	When set to `no' (its default value), the write community cannot be accessed via SNMP.
STR snmpProfile_ReadWriteCommunity	1.3.6.1.4.1.529.23.114.1.1.5	DisplayString	read-write	The SNMP community name for read/write access.
INT snmpProfile_EnforceAddressSecurity	1.3.6.1.4.1.529.23.114.1.1.6	INTEGER	read-write	When set to `no' (its default value), we will allow access to all SNMP managers that know the community string. When set to `yes', we will check the source IP address against the ones that are defined in the SNMP-MANAGER profiles before allowing access.
STR snmpProfile_Contact	1.3.6.1.4.1.529.23.114.1.1.7	DisplayString	read-write	The name of the contact for this device. SNMP readable and settable.
STR snmpProfile_Location	1.3.6.1.4.1.529.23.114.1.1.8	DisplayString	read-write	The location of this device. SNMP readable and settable.
INT snmpProfile_QueueDepth	1.3.6.1.4.1.529.23.114.1.1.9	INTEGER	read-write	The maximum number of SNMP packets waiting to be serviced. Additional packets will be dropped. When setting this value, you're trading memory resources versus SNMP retries (only when the box is busy and gets behind on servicing the SNMP packets). Zero indicates there is no limit.
INT snmpProfile_CsmModemDiag	1.3.6.1.4.1.529.23.114.1.1.10	INTEGER	read-write	When set to `no' (its default value), SNMP CSM modem card diag is disabled. A JEDEC card is required to turn on this feature.
INT snmpProfile_SnmpMessageType	1.3.6.1.4.1.529.23.114.1.1.11	INTEGER	read-write	Indicate the message type that the SNMP agent should handle.
INT snmpProfile_SecurityLevel	1.3.6.1.4.1.529.23.114.1.1.12	INTEGER	read-write	Indicate the security level of the SNMP agent. Applicable only if SNMPv3 message handling enabled
INT snmpProfile_EnableVacm	1.3.6.1.4.1.529.23.114.1.1.13	INTEGER	read-write	If set to TRUE, View Based Access Control Model (VACM) would be enabled, otherwise VACM is disabled.
INT snmpProfile_Action_o	1.3.6.1.4.1.529.23.114.1.1.14	INTEGER	read-write
INT snmpProfile_NotificationLogAgeOut	1.3.6.1.4.1.529.23.114.1.1.15	INTEGER	read-write	The number of minutes a Notification SHOULD be kept in a log before it is automatically removed. A value of 0 means no age out.
INT snmpProfile_EarlyQueueDiscard	1.3.6.1.4.1.529.23.114.1.1.16	INTEGER	read-write	If this parameter is set to yes, the system will filter and discard the requests from unauthorized host before queuing to the SNMP UDP port 161. If this parameter is set to no, the system will queue all incoming SNMP requests to SNMP layer which will discard the requests later if they are from unauthorized host.
INT snmpProfile_BitStringsAllowed	1.3.6.1.4.1.529.23.114.1.1.17	INTEGER	read-write	If enabled, TAOS agent responds to BITS data type in bit string format. If disabled, TAOS agent responds in numeric format.
INT snmpProfile_AlarmClearTableLimit	1.3.6.1.4.1.529.23.114.1.1.18	INTEGER	read-write	The maximum number of alarmCleared entries that can be held in the alarmCleared table.
mibusmUserProfile	1.3.6.1.4.1.529.23.115
mibusmUserProfileTable	1.3.6.1.4.1.529.23.115.1		not-accessible	A list of mibusmUserProfile profile entries.
mibusmUserProfileEntry	1.3.6.1.4.1.529.23.115.1.1		not-accessible	A mibusmUserProfile entry containing objects that maps to the parameters of mibusmUserProfile profile.
OCT usmUserProfile_Name	1.3.6.1.4.1.529.23.115.1.1.1	OCTET STRING	read-only	The user (principal) on whose behalf the message is being exchange.
INT usmUserProfile_ActiveEnabled	1.3.6.1.4.1.529.23.115.1.1.2	INTEGER	read-write	TRUE if this user is enabled for message exchange.
INT usmUserProfile_ReadWriteAccess	1.3.6.1.4.1.529.23.115.1.1.3	INTEGER	read-write	TRUE if this user is configured for read-write access to MIB view.
INT usmUserProfile_AuthProtocol	1.3.6.1.4.1.529.23.115.1.1.4	INTEGER	read-write	Indicate whether messages sent on behalf of this user to/from the SNMP engine can be authenticated and,if so, the type of authentication protocol to be used.
INT usmUserProfile_PrivProtocol	1.3.6.1.4.1.529.23.115.1.1.5	INTEGER	read-write	Indicate whether messages sent on behalf of this user to/from the SNMP engine can be protected by encryption and,if so, the type of privacy protocol to be used.
OCT usmUserProfile_AuthKey	1.3.6.1.4.1.529.23.115.1.1.6	OCTET STRING	read-write	The user's authkey: calculated based on password and auth protocol. This can be set using snmpAuthPass command
OCT usmUserProfile_PrivKey	1.3.6.1.4.1.529.23.115.1.1.7	OCTET STRING	read-write	The user's privacy: key calculated based on priv-password and auth protocol. This can be set using snmpPrivPass command
INT usmUserProfile_Action_o	1.3.6.1.4.1.529.23.115.1.1.8	INTEGER	read-write
mibsnmpv3TargetParamProfile	1.3.6.1.4.1.529.23.116
mibsnmpv3TargetParamProfileTable	1.3.6.1.4.1.529.23.116.1		not-accessible	A list of mibsnmpv3TargetParamProfile profile entries.
mibsnmpv3TargetParamProfileEntry	1.3.6.1.4.1.529.23.116.1.1		not-accessible	A mibsnmpv3TargetParamProfile entry containing objects that maps to the parameters of mibsnmpv3TargetParamProfile profile.
OCT snmpv3TargetParamProfile_Name	1.3.6.1.4.1.529.23.116.1.1.1	OCTET STRING	read-only	Any arbitrary, but unique identifier associated with this profile
INT snmpv3TargetParamProfile_ActiveEnabled	1.3.6.1.4.1.529.23.116.1.1.2	INTEGER	read-write	TRUE if this profile is enabled for generation of SNMP messages
INT snmpv3TargetParamProfile_MsgProcModel	1.3.6.1.4.1.529.23.116.1.1.3	INTEGER	read-write	Message processing model used when generating SNMP messages using this entry
INT snmpv3TargetParamProfile_SecurityModel	1.3.6.1.4.1.529.23.116.1.1.4	INTEGER	read-write	Security model to be used when generating SNMP messages using this entry
OCT snmpv3TargetParamProfile_SecurityName	1.3.6.1.4.1.529.23.116.1.1.5	OCTET STRING	read-write	Security name which identifies the principal on whose behalf SNMP messages will be generated using this entry. This name should be a valid snmpv3-usm-user
INT snmpv3TargetParamProfile_SecurityLevel	1.3.6.1.4.1.529.23.116.1.1.6	INTEGER	read-write	Level of security to be used when generating messages using this entry.
INT snmpv3TargetParamProfile_Action_o	1.3.6.1.4.1.529.23.116.1.1.7	INTEGER	read-write
mibsnmpv3NotifyProfile	1.3.6.1.4.1.529.23.117
mibsnmpv3NotifyProfileTable	1.3.6.1.4.1.529.23.117.1		not-accessible	A list of mibsnmpv3NotifyProfile profile entries.
mibsnmpv3NotifyProfileEntry	1.3.6.1.4.1.529.23.117.1.1		not-accessible	A mibsnmpv3NotifyProfile entry containing objects that maps to the parameters of mibsnmpv3NotifyProfile profile.
OCT snmpv3NotifyProfile_Name	1.3.6.1.4.1.529.23.117.1.1.1	OCTET STRING	read-only	Any arbitrary, but unique identifier associated with this profile
INT snmpv3NotifyProfile_ActiveEnabled	1.3.6.1.4.1.529.23.117.1.1.2	INTEGER	read-write	TRUE if this profile is enabled for generation of SNMP messages
OCT snmpv3NotifyProfile_Tag	1.3.6.1.4.1.529.23.117.1.1.3	OCTET STRING	read-write	Single tag value that is used to select entries in the snmpTargetAddrTable ( 'trap' profile). If this contains a string of zero length, no entries are selected.
INT snmpv3NotifyProfile_Type	1.3.6.1.4.1.529.23.117.1.1.4	INTEGER	read-only	Type of notification to be generated, i.e., Trap (unconfirmed class) or Inform (confirmed class). This field is for future use. Agent does not generate INFORM pdus.
INT snmpv3NotifyProfile_Action_o	1.3.6.1.4.1.529.23.117.1.1.5	INTEGER	read-write
mibsnmpManagerProfile	1.3.6.1.4.1.529.23.118
mibsnmpManagerProfileTable	1.3.6.1.4.1.529.23.118.1		not-accessible	A list of mibsnmpManagerProfile profile entries.
mibsnmpManagerProfileEntry	1.3.6.1.4.1.529.23.118.1.1		not-accessible	A mibsnmpManagerProfile entry containing objects that maps to the parameters of mibsnmpManagerProfile profile.
STR snmpManagerProfile_Name	1.3.6.1.4.1.529.23.118.1.1.1	DisplayString	read-only	The name or the ip-address in dot format of the SNMP Manager (host) to send SNMP requests to the TAOS SNMP Agent. When DNS or YP/NIS is supported this name will be used to look up the LAN address.
INT snmpManagerProfile_Active	1.3.6.1.4.1.529.23.118.1.1.2	INTEGER	read-write	TRUE if SNMP messages from a particular SNMP Manager should be processed. This implies read-access for SNMPv1.
INT snmpManagerProfile_WriteAccess	1.3.6.1.4.1.529.23.118.1.1.3	INTEGER	read-write	When set to `no' (its default value), the SNMP agent only allows read requests. When set to 'yes', the SNMP agent allows write requests in addition to read requests.
INT snmpManagerProfile_SnmpMessageType	1.3.6.1.4.1.529.23.118.1.1.4	INTEGER	read-write	Indicate the message type that the SNMP agent should allow for this SNMP Manager.
INT snmpManagerProfile_Action_o	1.3.6.1.4.1.529.23.118.1.1.5	INTEGER	read-write

RFC description

Ascend Communications vendor-private MIB for SNMP management of Ascend network equipment and access devices.

Start monitoring Ascend Communications (Lucent) MAX/Pipeline/TNT WAN access equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ASCEND-MIBSNMP-MIB

What Is ASCEND-MIBSNMP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description