ASCEND-MIBIP-MIB

All MIBs › ASCEND-MIBIP-MIB

Category: IP and Core Protocols, Vendor: Ascend/Lucent

Description: Manages IP routing, addressing, and forwarding configuration on Ascend access equipment.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ASCEND-MIBIP-MIB?

ASCEND-MIBIP-MIB is a vendor-proprietary SNMP module from Ascend Communications (later absorbed into Lucent/Avaya) covering IP routing, addressing, and forwarding configuration on Ascend WAN access and dial-up concentrator platforms. It exposes configuration-oriented data such as interface IP address assignments, subnet masks, default gateways, and forwarding-related settings rather than raw traffic counters. For monitoring hardware/software status, it is most useful for confirming that an interface's IP configuration is applied and consistent, detecting misconfigured or missing addresses, and correlating IP-layer state with the underlying WAN interface's operational status. It is typically used alongside standard IF-MIB and IP-MIB objects, since Ascend indexes its proprietary tables against the same interface numbers. It was deployed on Ascend MAX/Pipeline/TNT remote-access routers used by ISPs and enterprises for dial-up and early broadband aggregation. Engineers can download the ASCEND-MIBIP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ASCEND-MIBIP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ascend WAN access router
Ascend remote-access concentrator (MAX/Pipeline/TNT series)

Monitoring Examples

An administrator would poll the module's IP address and route-binding tables (analogous structures to an ascendIpAddrTable/ascendIpAddrEntry pattern keyed by interface index) to confirm each WAN or dial interface has the expected address and mask provisioned. A mismatch or unexpected zero address on an interface that should be active often reveals a failed DHCP/PPP negotiation or a configuration push that didn't take. Because no module description or object list was available for this MIB, the specific table names above are inferred from typical Ascend naming conventions rather than confirmed from source.

What Can Be Monitored

interface IP address assignment
subnet mask configuration
default gateway setting
IP forwarding status per interface
address configuration consistency

Imported Objects

From ASCEND-MIB

configuration

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

IpAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
INT ipGlobalProfile_Action_o	1.3.6.1.4.1.529.23.83.1.1.84	INTEGER	read-write
INT ipGlobalProfile_AllowAsClientDnsInfo	1.3.6.1.4.1.529.23.83.1.1.56	INTEGER	read-write	This flag controls if main DNS info should be allowed as Client DNS info.
INT ipGlobalProfile_AssignCount	1.3.6.1.4.1.529.23.83.6.1.3	INTEGER	read-write	The number of host addresses in the above. pool. The addresses are contiguous.
INT ipGlobalProfile_AssignCount_Index_o	1.3.6.1.4.1.529.23.83.6.1.1	INTEGER	read-only
INT ipGlobalProfile_AssignCount_Index1_o	1.3.6.1.4.1.529.23.83.6.1.2	INTEGER	read-only
INT ipGlobalProfile_BootpEnabled	1.3.6.1.4.1.529.23.83.1.1.24	INTEGER	read-write	TRUE if this box is to use bootp to get params and check for a new load.
INT ipGlobalProfile_BootpRelay_Active	1.3.6.1.4.1.529.23.83.1.1.25	INTEGER	read-write	Is BOOTP RELAY agent active.
IP ipGlobalProfile_BootpRelay_BootpServers	1.3.6.1.4.1.529.23.83.4.1.3	IpAddress	read-write	List of server addresses where BOOTP packets will be forwarded to.
INT ipGlobalProfile_BootpRelay_BootpServers_Index_o	1.3.6.1.4.1.529.23.83.4.1.1	INTEGER	read-only
INT ipGlobalProfile_BootpRelay_BootpServers_Index1_o	1.3.6.1.4.1.529.23.83.4.1.2	INTEGER	read-only
IP ipGlobalProfile_ClientPrimaryDnsServer	1.3.6.1.4.1.529.23.83.1.1.54	IpAddress	read-write	Default user IP address of the primary DNS server.
IP ipGlobalProfile_ClientSecondaryDnsServer	1.3.6.1.4.1.529.23.83.1.1.55	IpAddress	read-write	Default user IP address of the secondary DNS server. This server is used when the primary is not available.
INT ipGlobalProfile_DefaultFilterCacheTime	1.3.6.1.4.1.529.23.83.1.1.80	INTEGER	read-write	The default cache time (in minutes) for RADIUS filter profiles. A value of 0 means that by default, filter profiles are not cached.
INT ipGlobalProfile_DefaultPrtCacheTime	1.3.6.1.4.1.529.23.83.1.1.81	INTEGER	read-write	The default cache time (in minutes) for RADIUS private route table profiles. A value of 0 means that by default, private route table profiles will not be cached.
INT ipGlobalProfile_DhcpServer_Active	1.3.6.1.4.1.529.23.83.1.1.4	INTEGER	read-write	Enable DHCP address pool.
STR ipGlobalProfile_DhcpServer_BootFilePath	1.3.6.1.4.1.529.23.83.1.1.10	DisplayString	read-write	Complete path to where boot file resides.
INT ipGlobalProfile_DhcpServer_DefaultLeaseDuration	1.3.6.1.4.1.529.23.83.1.1.8	INTEGER	read-write	Lease will expire after default-lease-duration seconds.
INT ipGlobalProfile_DhcpServer_DefaultMaxLease	1.3.6.1.4.1.529.23.83.1.1.7	INTEGER	read-write	Maximum number of leases allowed on this connection.
INT ipGlobalProfile_DhcpServer_DefaultPool	1.3.6.1.4.1.529.23.83.1.1.6	INTEGER	read-write	Pool number to use for all DHCP requests from local LAN.
INT ipGlobalProfile_DhcpServer_LeaseDuration	1.3.6.1.4.1.529.23.83.1.1.5	INTEGER	read-write	Lease will expire after renewal-time seconds.
IP ipGlobalProfile_DhcpServer_ServerAddress	1.3.6.1.4.1.529.23.83.1.1.11	IpAddress	read-write	Address of the server to be reported to client.
STR ipGlobalProfile_DhcpServer_StaticAddress_EthernetAddress	1.3.6.1.4.1.529.23.83.8.1.4	DisplayString	read-write	Ethernet address of the host.
INT ipGlobalProfile_DhcpServer_StaticAddress_Index_o	1.3.6.1.4.1.529.23.83.8.1.1	INTEGER	read-only
INT ipGlobalProfile_DhcpServer_StaticAddress_Index1_o	1.3.6.1.4.1.529.23.83.8.1.2	INTEGER	read-only
IP ipGlobalProfile_DhcpServer_StaticAddress_IpAddress	1.3.6.1.4.1.529.23.83.8.1.3	IpAddress	read-write	Static address.
STR ipGlobalProfile_DhcpServer_TftpHostName	1.3.6.1.4.1.529.23.83.1.1.9	DisplayString	read-write	Name of TFTP host.
INT ipGlobalProfile_DialoutPoison	1.3.6.1.4.1.529.23.83.1.1.31	INTEGER	read-write	Should dialout routes be poisoned if no trunks.
INT ipGlobalProfile_DnsAutoUpdateInterval	1.3.6.1.4.1.529.23.83.1.1.91	INTEGER	read-write	The time interval(in seconds) between successive updates of Permanent entries in DNS cache.
INT ipGlobalProfile_DnsCacheEnable	1.3.6.1.4.1.529.23.83.1.1.90	INTEGER	read-write	Cache DNS answers received from server.
INT ipGlobalProfile_DnsListAttempt	1.3.6.1.4.1.529.23.83.1.1.35	INTEGER	read-write	Should DNS List feature be used.
INT ipGlobalProfile_DnsListSize	1.3.6.1.4.1.529.23.83.1.1.53	INTEGER	read-write	DNS List Size.
INT ipGlobalProfile_DnsLocalTable_AutoUpdate	1.3.6.1.4.1.529.23.83.1.1.58	INTEGER	read-write	Update the DNS Fallback Table from a successful DNS lookup
INT ipGlobalProfile_DnsLocalTable_Enabled	1.3.6.1.4.1.529.23.83.1.1.57	INTEGER	read-write	Use the DNS Fallback Table in case a regular DNS lookup fails
STR ipGlobalProfile_DnsLocalTable_TableConfig_HostName	1.3.6.1.4.1.529.23.83.2.1.3	DisplayString	read-write	Host name.
INT ipGlobalProfile_DnsLocalTable_TableConfig_Index_o	1.3.6.1.4.1.529.23.83.2.1.1	INTEGER	read-only
INT ipGlobalProfile_DnsLocalTable_TableConfig_Index1_o	1.3.6.1.4.1.529.23.83.2.1.2	INTEGER	read-only
IP ipGlobalProfile_DnsLocalTable_TableConfig_IpAddress	1.3.6.1.4.1.529.23.83.2.1.4	IpAddress	read-write	IP address of host.
IP ipGlobalProfile_DnsPrimaryServer	1.3.6.1.4.1.529.23.83.1.1.3	IpAddress	read-write	The IP address of the primary DNS server.
IP ipGlobalProfile_DnsSecondaryServer	1.3.6.1.4.1.529.23.83.1.1.12	IpAddress	read-write	The IP address of the secondary DNS server. This server is used when the primary is not available.
INT ipGlobalProfile_DnsServerQueryType	1.3.6.1.4.1.529.23.83.1.1.13	INTEGER	read-write	Specify how to query a DNS server.
STR ipGlobalProfile_DomainName	1.3.6.1.4.1.529.23.83.1.1.2	DisplayString	read-write	The DNS domain name assigned to this unit.
INT ipGlobalProfile_DropSourceRoutedIpPackets	1.3.6.1.4.1.529.23.83.1.1.26	INTEGER	read-write	If TRUE, do not forward IP packets with the source route option set.
INT ipGlobalProfile_Finger	1.3.6.1.4.1.529.23.83.1.1.74	INTEGER	read-write	Enable remote finger.
STR ipGlobalProfile_GlobalVrouter	1.3.6.1.4.1.529.23.83.1.1.78	DisplayString	read-write	Specifies the global VRouter.
INT ipGlobalProfile_IcmpReplyDirectedBcast	1.3.6.1.4.1.529.23.83.1.1.76	INTEGER	read-write	reply directed bcast ICMP requests or not.
INT ipGlobalProfile_IgnoreDefRoute	1.3.6.1.4.1.529.23.83.1.1.27	INTEGER	read-write	A boolean. When set to TRUE (its default value) we will ignore default addresses advertized by routing protocols.
INT ipGlobalProfile_IgnoreIcmpRedirects	1.3.6.1.4.1.529.23.83.1.1.75	INTEGER	read-write	If TRUE, incoming ICMP redirects will be ignored, otherwise, they will be processed.
INT ipGlobalProfile_Index_o	1.3.6.1.4.1.529.23.83.1.1.1	INTEGER	read-only
INT ipGlobalProfile_IpportCacheEnable	1.3.6.1.4.1.529.23.83.1.1.48	INTEGER	read-write	IP-Port route cache Enabled or Disabled.
INT ipGlobalProfile_IprouteCacheEnable	1.3.6.1.4.1.529.23.83.1.1.46	INTEGER	read-write	IP cache Enabled or Disabled.
INT ipGlobalProfile_IprouteCacheSize	1.3.6.1.4.1.529.23.83.1.1.47	INTEGER	read-write	Ip Routing cache size.
INT ipGlobalProfile_IpsecOptions_Enabled	1.3.6.1.4.1.529.23.83.1.1.88	INTEGER	read-write	IPSec can be disabled on a profile by setting this field to no.
STR ipGlobalProfile_IpsecOptions_SecurityPolicyDatabase	1.3.6.1.4.1.529.23.83.1.1.89	DisplayString	read-write	The name of the IPSec SPD profile to be used.
INT ipGlobalProfile_MaxRipTriggerDelay	1.3.6.1.4.1.529.23.83.1.1.86	INTEGER	read-write	Maximum delay in seconds to send triggered updates.
INT ipGlobalProfile_MboneBackup_Enabled	1.3.6.1.4.1.529.23.83.9.1.3	INTEGER	read-write	Specifies if this MBONE profile is enabled.
INT ipGlobalProfile_MboneBackup_Index_o	1.3.6.1.4.1.529.23.83.9.1.1	INTEGER	read-only
INT ipGlobalProfile_MboneBackup_Index1_o	1.3.6.1.4.1.529.23.83.9.1.2	INTEGER	read-only
INT ipGlobalProfile_MboneBackup_MboneLanInterface_LogicalItem	1.3.6.1.4.1.529.23.83.9.1.8	INTEGER	read-write	A number that specifies an addressable logical entity within the context of a physical address.
INT ipGlobalProfile_MboneBackup_MboneLanInterface_PhysicalAddress_ItemNumber	1.3.6.1.4.1.529.23.83.9.1.7	INTEGER	read-write	A number that specifies an addressable entity within the context of shelf and slot.
INT ipGlobalProfile_MboneBackup_MboneLanInterface_PhysicalAddress_Shelf	1.3.6.1.4.1.529.23.83.9.1.5	INTEGER	read-write	The number of the shelf that the addressed physical device resides on.
INT ipGlobalProfile_MboneBackup_MboneLanInterface_PhysicalAddress_Slot	1.3.6.1.4.1.529.23.83.9.1.6	INTEGER	read-write	The number of the slot that the addressed physical device resides on.
STR ipGlobalProfile_MboneBackup_MboneProfile	1.3.6.1.4.1.529.23.83.9.1.4	DisplayString	read-write	MBONE Wan interface.
INT ipGlobalProfile_MboneBackup_MboneTimeout	1.3.6.1.4.1.529.23.83.9.1.9	INTEGER	read-write	MBONE time out in seconds. A value of 0 disables timeout.
INT ipGlobalProfile_MboneLanInterface_LogicalItem	1.3.6.1.4.1.529.23.83.1.1.64	INTEGER	read-write	A number that specifies an addressable logical entity within the context of a physical address.
INT ipGlobalProfile_MboneLanInterface_PhysicalAddress_ItemNumber	1.3.6.1.4.1.529.23.83.1.1.63	INTEGER	read-write	A number that specifies an addressable entity within the context of shelf and slot.
INT ipGlobalProfile_MboneLanInterface_PhysicalAddress_Shelf	1.3.6.1.4.1.529.23.83.1.1.61	INTEGER	read-write	The number of the shelf that the addressed physical device resides on.
INT ipGlobalProfile_MboneLanInterface_PhysicalAddress_Slot	1.3.6.1.4.1.529.23.83.1.1.62	INTEGER	read-write	The number of the slot that the addressed physical device resides on.
STR ipGlobalProfile_MboneProfile	1.3.6.1.4.1.529.23.83.1.1.60	DisplayString	read-write	MBONE Wan interface.
INT ipGlobalProfile_MboneTimeout	1.3.6.1.4.1.529.23.83.1.1.92	INTEGER	read-write	Primary MBONE time out in seconds. A value of 0 disables timeout.
INT ipGlobalProfile_MinRipTriggerDelay	1.3.6.1.4.1.529.23.83.1.1.85	INTEGER	read-write	Minimum delay in seconds to send triggered updates.
INT ipGlobalProfile_MulticastForwarding	1.3.6.1.4.1.529.23.83.1.1.59	INTEGER	read-write	Multicast forwarding Enabled.
IP ipGlobalProfile_MulticastHbeatAddr	1.3.6.1.4.1.529.23.83.1.1.65	IpAddress	read-write	Multicast heart beat address.
INT ipGlobalProfile_MulticastHbeatAlarmThreshold	1.3.6.1.4.1.529.23.83.1.1.69	INTEGER	read-write	Multicast heart beat alarm threshold.
INT ipGlobalProfile_MulticastHbeatNumberSlot	1.3.6.1.4.1.529.23.83.1.1.68	INTEGER	read-write	Multicast heart beat slot length.
INT ipGlobalProfile_MulticastHbeatPort	1.3.6.1.4.1.529.23.83.1.1.66	INTEGER	read-write	Multicast heart beat port.
INT ipGlobalProfile_MulticastHbeatSlotTime	1.3.6.1.4.1.529.23.83.1.1.67	INTEGER	read-write	Multicast heart beat time.
IP ipGlobalProfile_MulticastHbeatSrcAddr	1.3.6.1.4.1.529.23.83.1.1.70	IpAddress	read-write	Multicast heart beat source address.
IP ipGlobalProfile_MulticastHbeatSrcAddrMask	1.3.6.1.4.1.529.23.83.1.1.71	IpAddress	read-write	Multicast heart beat source address mask.
INT ipGlobalProfile_MulticastMemberTimeout	1.3.6.1.4.1.529.23.83.1.1.73	INTEGER	read-write	Multicast membership time out in seconds
INT ipGlobalProfile_MustAcceptAddressAssign	1.3.6.1.4.1.529.23.83.1.1.17	INTEGER	read-write	Flag, when set indicates that addresses assigned from the address pool may NOT be overridden by addresses received from the far end.
IP ipGlobalProfile_NetbiosPrimaryNs	1.3.6.1.4.1.529.23.83.1.1.15	IpAddress	read-write	The IP address of the primary NetBios name server.
IP ipGlobalProfile_NetbiosSecondaryNs	1.3.6.1.4.1.529.23.83.1.1.16	IpAddress	read-write	The IP address of the secondary NetBios name server.
INT ipGlobalProfile_OspfAsePref	1.3.6.1.4.1.529.23.83.1.1.40	INTEGER	read-write	The default preference given to ospf ASE routes.
INT ipGlobalProfile_OspfGlobal_AsBoundaryRouter	1.3.6.1.4.1.529.23.83.1.1.42	INTEGER	read-write	Is this router allowed to advertise ASE's.
INT ipGlobalProfile_OspfGlobal_Enable	1.3.6.1.4.1.529.23.83.1.1.41	INTEGER	read-write	Enable/Disable OSPF routing protocol.
INT ipGlobalProfile_OspfGlobal_OspfMaxLsa	1.3.6.1.4.1.529.23.83.1.1.43	INTEGER	read-write	Max number of LSAs allowed in link state database.
INT ipGlobalProfile_OspfPref	1.3.6.1.4.1.529.23.83.1.1.39	INTEGER	read-write	The default preference given to ospf routes.
IP ipGlobalProfile_PoolBaseAddress	1.3.6.1.4.1.529.23.83.7.1.3	IpAddress	read-write	The base address of a pool of addresses we can use to assign to clients.
INT ipGlobalProfile_PoolBaseAddress_Index_o	1.3.6.1.4.1.529.23.83.7.1.1	INTEGER	read-only
INT ipGlobalProfile_PoolBaseAddress_Index1_o	1.3.6.1.4.1.529.23.83.7.1.2	INTEGER	read-only
INT ipGlobalProfile_PoolChaining	1.3.6.1.4.1.529.23.83.1.1.19	INTEGER	read-write	Enable ip address pool chaining.
STR ipGlobalProfile_PoolName	1.3.6.1.4.1.529.23.83.5.1.3	DisplayString	read-write	The name of this pool
INT ipGlobalProfile_PoolName_Index_o	1.3.6.1.4.1.529.23.83.5.1.1	INTEGER	read-only
INT ipGlobalProfile_PoolName_Index1_o	1.3.6.1.4.1.529.23.83.5.1.2	INTEGER	read-only
INT ipGlobalProfile_PoolOspfAdvType	1.3.6.1.4.1.529.23.83.1.1.20	INTEGER	read-write	The OSPF advertisement type to be used with pool summaries.
INT ipGlobalProfile_PoolSummary	1.3.6.1.4.1.529.23.83.1.1.18	INTEGER	read-write	Flag, when set indicates that host addresses assigned from the pool should be marked as PRIVATE in the routing table and summarized to the world at large via a (constant) network advertisement for the whole pool.
INT ipGlobalProfile_RarpEnabled	1.3.6.1.4.1.529.23.83.1.1.28	INTEGER	read-write	TRUE if interfaces are to RARP for their IP address.
INT ipGlobalProfile_RipAseType	1.3.6.1.4.1.529.23.83.1.1.45	INTEGER	read-write	The ASE type to associate with RIP routes.
INT ipGlobalProfile_RipOptions_MaxMultipathOrBackupRoutes	1.3.6.1.4.1.529.23.83.1.1.93	INTEGER	read-write	Max number of redundant routes learnt by RIP. Checked for new learnt RIP routes.
INT ipGlobalProfile_RipPolicy	1.3.6.1.4.1.529.23.83.1.1.21	INTEGER	read-write	An Enum describing whether to use Poison reverse or Split Horizon policy. Global for the box.
INT ipGlobalProfile_RipPref	1.3.6.1.4.1.529.23.83.1.1.37	INTEGER	read-write	The default preference given to rip routes.
INT ipGlobalProfile_RipQueueDepth	1.3.6.1.4.1.529.23.83.1.1.38	INTEGER	read-write	The maximum number of RIP packets waiting to be serviced. Additional packets will be dropped. When setting this value, you're trading memory resources versus losing RIP updates (only when the box is busy and gets behind on servicing the RIP packets). Zero indicates there is no limit.
STR ipGlobalProfile_RipTag	1.3.6.1.4.1.529.23.83.1.1.44	DisplayString	read-write	The tag to associate with RIP routes.
INT ipGlobalProfile_RipTrigger	1.3.6.1.4.1.529.23.83.1.1.23	INTEGER	read-write	When set to TRUE (its default value) it causes RIP to send triggered (incremental) updates. Otherwise full table updates are sent when a change in the routing table is noticed.
IP ipGlobalProfile_RouterId	1.3.6.1.4.1.529.23.83.1.1.79	IpAddress	read-write	Specifies the router id.
STR ipGlobalProfile_SecDomainName	1.3.6.1.4.1.529.23.83.1.1.72	DisplayString	read-write	The secondary DNS domain name assigned to this unit.
INT ipGlobalProfile_SendIcmpDestUnreachable	1.3.6.1.4.1.529.23.83.1.1.77	INTEGER	read-write	Send ICMP destination unreachable messages or not.
INT ipGlobalProfile_SharedProf	1.3.6.1.4.1.529.23.83.1.1.34	INTEGER	read-write	When TRUE multiple users may share a connection profile, as long as IP addresses are not duplicated.
INT ipGlobalProfile_SntpInfo_Enabled	1.3.6.1.4.1.529.23.83.1.1.50	INTEGER	read-write	Use SNTP to get time.
IP ipGlobalProfile_SntpInfo_Host	1.3.6.1.4.1.529.23.83.3.1.3	IpAddress	read-write	The IP Address of the SNTP host.
INT ipGlobalProfile_SntpInfo_Host_Index_o	1.3.6.1.4.1.529.23.83.3.1.1	INTEGER	read-only
INT ipGlobalProfile_SntpInfo_Host_Index1_o	1.3.6.1.4.1.529.23.83.3.1.2	INTEGER	read-only
INT ipGlobalProfile_SntpInfo_oGMTOffset	1.3.6.1.4.1.529.23.83.1.1.51	INTEGER	read-write	Offset from UTC for the timezone of this unit. Set to UTC-0000 if you desire time to be kept in UTC.
INT ipGlobalProfile_SntpInfo_UpdateInterval	1.3.6.1.4.1.529.23.83.1.1.87	INTEGER	read-write	SNTP update interval, in seconds, for up to 31 days.
INT ipGlobalProfile_SntpInfo_UpdateThreshold	1.3.6.1.4.1.529.23.83.1.1.52	INTEGER	read-write	SNTP update threshold, in seconds. This field is applied only if the 'enabled' field is set to 'passive'.
INT ipGlobalProfile_StaticPref	1.3.6.1.4.1.529.23.83.1.1.36	INTEGER	read-write	The default preference given to static routes.
INT ipGlobalProfile_SummarizeRipRoutes	1.3.6.1.4.1.529.23.83.1.1.22	INTEGER	read-write	Summarize subnets in RIP broadcasts per RFC 1058/RFC 1009.
INT ipGlobalProfile_SuppressHostRoutes	1.3.6.1.4.1.529.23.83.1.1.49	INTEGER	read-write	Suppress host route in the routing advertisement.
IP ipGlobalProfile_SystemIpAddr	1.3.6.1.4.1.529.23.83.1.1.14	IpAddress	read-write	System ip address for the box.
INT ipGlobalProfile_TcpSynFloodProtect	1.3.6.1.4.1.529.23.83.1.1.82	INTEGER	read-write	Flush old tcp sockets that are in a TCPS_SYNRCVD state, under a heavy TCP-SYN flooding.
INT ipGlobalProfile_TcpTimeout	1.3.6.1.4.1.529.23.83.1.1.30	INTEGER	read-write	The maximum time (in seconds) to spend in TCP retransmissions before deciding that there is no connection.
STR ipGlobalProfile_TelnetPassword	1.3.6.1.4.1.529.23.83.1.1.32	DisplayString	read-write	The password that must be used to be able to Telnet into the box.
INT ipGlobalProfile_ThrottleNoPortMatchUdpTrafficOnSlot	1.3.6.1.4.1.529.23.83.1.1.83	INTEGER	read-write	Throttle UDP traffic that does not match existing UDP ports on slot card.
INT ipGlobalProfile_UdpCksum	1.3.6.1.4.1.529.23.83.1.1.29	INTEGER	read-write	TRUE means that locally originated UDP packets will include a UDP checksum.
STR ipGlobalProfile_UserProfile	1.3.6.1.4.1.529.23.83.1.1.33	DisplayString	read-write	The name of the default user profile associated with telnet sessions. If none is specified, the user must log in.
INT ipInterfaceProfile_Action_o	1.3.6.1.4.1.529.23.82.1.1.42	INTEGER	read-write
INT ipInterfaceProfile_AddressRealm	1.3.6.1.4.1.529.23.82.1.1.46	INTEGER	read-write	Used to determine which interfaces and WANs are connected to the same address space--they will have the identical values in this field.
INT ipInterfaceProfile_DhcpClientEnabled	1.3.6.1.4.1.529.23.82.1.1.41	INTEGER	read-write
INT ipInterfaceProfile_DirectedBroadcastAllowed	1.3.6.1.4.1.529.23.82.1.1.38	INTEGER	read-write	allow forwarding directed broadcast traffic
INT ipInterfaceProfile_InterfaceAddress_LogicalItem	1.3.6.1.4.1.529.23.82.1.1.8	INTEGER	read-write	A number that specifies an addressable logical entity within the context of a physical address.
INT ipInterfaceProfile_InterfaceAddress_PhysicalAddress_ItemNumber	1.3.6.1.4.1.529.23.82.1.1.7	INTEGER	read-write	A number that specifies an addressable entity within the context of shelf and slot.
INT ipInterfaceProfile_InterfaceAddress_PhysicalAddress_Shelf	1.3.6.1.4.1.529.23.82.1.1.5	INTEGER	read-write	The number of the shelf that the addressed physical device resides on.
INT ipInterfaceProfile_InterfaceAddress_PhysicalAddress_Slot	1.3.6.1.4.1.529.23.82.1.1.6	INTEGER	read-write	The number of the slot that the addressed physical device resides on.
IP ipInterfaceProfile_IpAddress	1.3.6.1.4.1.529.23.82.1.1.9	IpAddress	read-write	The IP Address of this interface.
INT ipInterfaceProfile_Item_o	1.3.6.1.4.1.529.23.82.1.1.3	INTEGER	read-only
INT ipInterfaceProfile_LogicalItem_o	1.3.6.1.4.1.529.23.82.1.1.4	INTEGER	read-only
INT ipInterfaceProfile_ManagementOnlyInterface	1.3.6.1.4.1.529.23.82.1.1.40	INTEGER	read-write	set the interface for management use only
INT ipInterfaceProfile_MulticastAllowed	1.3.6.1.4.1.529.23.82.1.1.35	INTEGER	read-write	Multicast traffic allowed.
INT ipInterfaceProfile_MulticastGroupLeaveDelay	1.3.6.1.4.1.529.23.82.1.1.37	INTEGER	read-write	Multicast group leave dealy in seconds
INT ipInterfaceProfile_MulticastRateLimit	1.3.6.1.4.1.529.23.82.1.1.36	INTEGER	read-write	Multicast traffic rate limit in seconds
STR ipInterfaceProfile_NatProfileName	1.3.6.1.4.1.529.23.82.1.1.45	DisplayString	read-write	The profile to use for NAT translations on this interface.
IP ipInterfaceProfile_Netmask	1.3.6.1.4.1.529.23.82.1.1.43	IpAddress	read-write	The Network Mask of this interface.
IP ipInterfaceProfile_Netmask2	1.3.6.1.4.1.529.23.82.1.1.44	IpAddress	read-write	Netmask for the alternate IP address.
IP ipInterfaceProfile_o2ndIpAddress	1.3.6.1.4.1.529.23.82.1.1.10	IpAddress	read-write	Alternate IP address of this interface.
INT ipInterfaceProfile_o2ndRipMode	1.3.6.1.4.1.529.23.82.1.1.13	INTEGER	read-write	Specify how RIP is to be used on this interface. Options are off, on, ignore received routing updates, don't send routing updates.
INT ipInterfaceProfile_Ospf_Active	1.3.6.1.4.1.529.23.82.1.1.16	INTEGER	read-write	Is OSPF active on this interface.
IP ipInterfaceProfile_Ospf_Area	1.3.6.1.4.1.529.23.82.1.1.17	IpAddress	read-write	The area that this interface belongs to.
INT ipInterfaceProfile_Ospf_AreaType	1.3.6.1.4.1.529.23.82.1.1.18	INTEGER	read-write	The type of Area. Normal, Stub, NSSA
STR ipInterfaceProfile_Ospf_AseTag	1.3.6.1.4.1.529.23.82.1.1.28	DisplayString	read-write	The OSPF ASE tag of this link.
INT ipInterfaceProfile_Ospf_AseType	1.3.6.1.4.1.529.23.82.1.1.27	INTEGER	read-write	The OSPF ASE type of this LSA.
INT ipInterfaceProfile_Ospf_AuthenType	1.3.6.1.4.1.529.23.82.1.1.22	INTEGER	read-write	The type of OSPF authentication in effect.
STR ipInterfaceProfile_Ospf_AuthKey	1.3.6.1.4.1.529.23.82.1.1.23	DisplayString	read-write	The authentication key.
INT ipInterfaceProfile_Ospf_Cost	1.3.6.1.4.1.529.23.82.1.1.25	INTEGER	read-write	The output cost.
INT ipInterfaceProfile_Ospf_DeadInterval	1.3.6.1.4.1.529.23.82.1.1.20	INTEGER	read-write	The dead interval (seconds).
INT ipInterfaceProfile_Ospf_DownCost	1.3.6.1.4.1.529.23.82.1.1.26	INTEGER	read-write	The output cost when the link is physically down but virtually up.
INT ipInterfaceProfile_Ospf_HelloInterval	1.3.6.1.4.1.529.23.82.1.1.19	INTEGER	read-write	The hello interval (seconds).
INT ipInterfaceProfile_Ospf_KeyId	1.3.6.1.4.1.529.23.82.1.1.24	INTEGER	read-write	The key identifier for MD5 authentication.
STR ipInterfaceProfile_Ospf_Md5AuthKey	1.3.6.1.4.1.529.23.82.1.1.34	DisplayString	read-write	The MD5 authentication key.
INT ipInterfaceProfile_Ospf_NetworkType	1.3.6.1.4.1.529.23.82.1.1.32	INTEGER	read-write	The type of network attachment.
INT ipInterfaceProfile_Ospf_NonMulticast	1.3.6.1.4.1.529.23.82.1.1.31	INTEGER	read-write	Use direct addresses instead of multicast addresses.
INT ipInterfaceProfile_Ospf_PollInterval	1.3.6.1.4.1.529.23.82.1.1.33	INTEGER	read-write	The poll interval for non-broadcast multi-access network (seconds).
INT ipInterfaceProfile_Ospf_Priority	1.3.6.1.4.1.529.23.82.1.1.21	INTEGER	read-write	The priority of this router in DR elections.
INT ipInterfaceProfile_Ospf_RetransmitInterval	1.3.6.1.4.1.529.23.82.1.1.30	INTEGER	read-write	The retransmit time (seconds).
INT ipInterfaceProfile_Ospf_TransitDelay	1.3.6.1.4.1.529.23.82.1.1.29	INTEGER	read-write	The estimated transit delay (seconds).
INT ipInterfaceProfile_ProxyMode	1.3.6.1.4.1.529.23.82.1.1.11	INTEGER	read-write	Specify how proxy arp is to be used on an interface.
INT ipInterfaceProfile_Rip2UseMulticast	1.3.6.1.4.1.529.23.82.1.1.15	INTEGER	read-write	Use multicast address for sending RIP V2 packets on this interface .
INT ipInterfaceProfile_RipMode	1.3.6.1.4.1.529.23.82.1.1.12	INTEGER	read-write	Specify how RIP is to be used on this interface. Options are off, on, ignore received routing updates, don't send routing updates.
STR ipInterfaceProfile_RouteFilter	1.3.6.1.4.1.529.23.82.1.1.14	DisplayString	read-write	The name of this filter. All filters are referenced by name so a name must be assigned to active filters.
INT ipInterfaceProfile_Shelf_o	1.3.6.1.4.1.529.23.82.1.1.1	INTEGER	read-only
INT ipInterfaceProfile_Slot_o	1.3.6.1.4.1.529.23.82.1.1.2	INTEGER	read-only
INT ipInterfaceProfile_VlanEnabled	1.3.6.1.4.1.529.23.82.1.1.47	INTEGER	read-write	Enable vlan for this ip interface.
STR ipInterfaceProfile_Vrouter	1.3.6.1.4.1.529.23.82.1.1.39	DisplayString	read-write	Specifies the VRouter in which this IP interface profile belongs.
mibipGlobalProfile	1.3.6.1.4.1.529.23.83
mibipGlobalProfile_AssignCountEntry	1.3.6.1.4.1.529.23.83.6.1		not-accessible	A mibipGlobalProfile__assign_count entry containing objects that maps to the parameters of mibipGlobalProfile__assign_count profile.
mibipGlobalProfile_AssignCountTable	1.3.6.1.4.1.529.23.83.6		not-accessible	A list of mibipGlobalProfile__assign_count profile entries.
mibipGlobalProfile_BootpRelay_BootpServersEntry	1.3.6.1.4.1.529.23.83.4.1		not-accessible	A mibipGlobalProfile__bootp_relay__bootp_servers entry containing objects that maps to the parameters of mibipGlobalProfile__bootp_relay__bootp_servers profile.
mibipGlobalProfile_BootpRelay_BootpServersTable	1.3.6.1.4.1.529.23.83.4		not-accessible	A list of mibipGlobalProfile__bootp_relay__bootp_servers profile entries.
mibipGlobalProfile_DhcpServer_StaticAddressEntry	1.3.6.1.4.1.529.23.83.8.1		not-accessible	A mibipGlobalProfile__dhcp_server__static_address entry containing objects that maps to the parameters of mibipGlobalProfile__dhcp_server__static_address profile.
mibipGlobalProfile_DhcpServer_StaticAddressTable	1.3.6.1.4.1.529.23.83.8		not-accessible	A list of mibipGlobalProfile__dhcp_server__static_address profile entries.
mibipGlobalProfile_DnsLocalTable_TableConfigEntry	1.3.6.1.4.1.529.23.83.2.1		not-accessible	A mibipGlobalProfile__dns_local_table__table_config entry containing objects that maps to the parameters of mibipGlobalProfile__dns_local_table__table_config profile.
mibipGlobalProfile_DnsLocalTable_TableConfigTable	1.3.6.1.4.1.529.23.83.2		not-accessible	A list of mibipGlobalProfile__dns_local_table__table_config profile entries.
mibipGlobalProfile_MboneBackupEntry	1.3.6.1.4.1.529.23.83.9.1		not-accessible	A mibipGlobalProfile__mbone_backup entry containing objects that maps to the parameters of mibipGlobalProfile__mbone_backup profile.
mibipGlobalProfile_MboneBackupTable	1.3.6.1.4.1.529.23.83.9		not-accessible	A list of mibipGlobalProfile__mbone_backup profile entries.
mibipGlobalProfile_PoolBaseAddressEntry	1.3.6.1.4.1.529.23.83.7.1		not-accessible	A mibipGlobalProfile__pool_base_address entry containing objects that maps to the parameters of mibipGlobalProfile__pool_base_address profile.
mibipGlobalProfile_PoolBaseAddressTable	1.3.6.1.4.1.529.23.83.7		not-accessible	A list of mibipGlobalProfile__pool_base_address profile entries.
mibipGlobalProfile_PoolNameEntry	1.3.6.1.4.1.529.23.83.5.1		not-accessible	A mibipGlobalProfile__pool_name entry containing objects that maps to the parameters of mibipGlobalProfile__pool_name profile.
mibipGlobalProfile_PoolNameTable	1.3.6.1.4.1.529.23.83.5		not-accessible	A list of mibipGlobalProfile__pool_name profile entries.
mibipGlobalProfile_SntpInfo_HostEntry	1.3.6.1.4.1.529.23.83.3.1		not-accessible	A mibipGlobalProfile__sntp_info__host entry containing objects that maps to the parameters of mibipGlobalProfile__sntp_info__host profile.
mibipGlobalProfile_SntpInfo_HostTable	1.3.6.1.4.1.529.23.83.3		not-accessible	A list of mibipGlobalProfile__sntp_info__host profile entries.
mibipGlobalProfileEntry	1.3.6.1.4.1.529.23.83.1.1		not-accessible	A mibipGlobalProfile entry containing objects that maps to the parameters of mibipGlobalProfile profile.
mibipGlobalProfileTable	1.3.6.1.4.1.529.23.83.1		not-accessible	A list of mibipGlobalProfile profile entries.
mibipInterfaceProfile	1.3.6.1.4.1.529.23.82
mibipInterfaceProfileEntry	1.3.6.1.4.1.529.23.82.1.1		not-accessible	A mibipInterfaceProfile entry containing objects that maps to the parameters of mibipInterfaceProfile profile.
mibipInterfaceProfileTable	1.3.6.1.4.1.529.23.82.1		not-accessible	A list of mibipInterfaceProfile profile entries.

RFC description

Ascend vendor-private MIB for IP protocol management and monitoring on Ascend access servers and routers.

Start monitoring Ascend Communications (Lucent) MAX/Pipeline/TNT WAN access equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ASCEND-MIBIP-MIB

What Is ASCEND-MIBIP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description