ASCEND-MIBBRITE-MIB

All MIBs › ASCEND-MIBBRITE-MIB

Category: Network Interfaces, Vendor: Ascend/Lucent

Description: Manages ISDN BRITE (Basic Rate ISDN Terminal Equipment) interfaces on Ascend access equipment.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ASCEND-MIBBRITE-MIB?

ASCEND-MIBBRITE-MIB is an Ascend proprietary MIB for BRITE (Basic Rate ISDN Terminal Equipment) interface cards used on Ascend remote-access equipment for ISDN BRI connectivity. It exposes configuration and status for ISDN BRI ports, including channel and line state. Its monitoring value is fault/status detection for dial-up and ISDN backup links: confirming B-channel/D-channel and line status so operators know ISDN capacity is available for incoming calls and can spot a port stuck out of service. It parallels concepts found in standard ISDN and DS0-related MIBs. It was deployed on legacy Ascend remote-access concentrators/routers offering ISDN dial access, and archived copies remain useful today as an ASCEND-MIBBRITE-MIB download for engineers maintaining these legacy platforms.

IPNetwork Monitor allows you to monitor SNMP objects defined in ASCEND-MIBBRITE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ascend ISDN remote-access/dial-up equipment

Monitoring Examples

No sample objects were captured for this module. Based on its purpose, it would expose a per-BRI-port status object covering channel and line state, which an operator polls to confirm ISDN lines are up and channels are available for dial calls, and to catch a port reporting a failed or out-of-service condition.

What Can Be Monitored

ISDN BRI port operational status
B-channel/D-channel state
line/call status

Imported Objects

From ASCEND-MIB

configuration

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

IpAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
mibbRINetworkProfile	1.3.6.1.4.1.529.23.63
mibbRINetworkProfileTable	1.3.6.1.4.1.529.23.63.1		not-accessible	A list of mibbRINetworkProfile profile entries.
mibbRINetworkProfileEntry	1.3.6.1.4.1.529.23.63.1.1		not-accessible	A mibbRINetworkProfile entry containing objects that maps to the parameters of mibbRINetworkProfile profile.
INT bRINetworkProfile_Shelf_o	1.3.6.1.4.1.529.23.63.1.1.1	INTEGER	read-only
INT bRINetworkProfile_Slot_o	1.3.6.1.4.1.529.23.63.1.1.2	INTEGER	read-only
INT bRINetworkProfile_Item_o	1.3.6.1.4.1.529.23.63.1.1.3	INTEGER	read-only
INT bRINetworkProfile_ProfileNumber	1.3.6.1.4.1.529.23.63.1.1.4	INTEGER	read-write	If it is a stored profile, the number of the profile (1..MAX_NETWORK_PROFILES). If it is the current profile, the number of the stored profile from which it was loaded, or zero if it has never been loaded.
STR bRINetworkProfile_Name	1.3.6.1.4.1.529.23.63.1.1.5	DisplayString	read-write	The null terminated ascii string that the user gave to this particular profile.
INT bRINetworkProfile_PhysicalAddress_Shelf	1.3.6.1.4.1.529.23.63.1.1.6	INTEGER	read-write	The number of the shelf that the addressed physical device resides on.
INT bRINetworkProfile_PhysicalAddress_Slot	1.3.6.1.4.1.529.23.63.1.1.7	INTEGER	read-write	The number of the slot that the addressed physical device resides on.
INT bRINetworkProfile_PhysicalAddress_ItemNumber	1.3.6.1.4.1.529.23.63.1.1.8	INTEGER	read-write	A number that specifies an addressable entity within the context of shelf and slot.
INT bRINetworkProfile_SwitchType	1.3.6.1.4.1.529.23.63.1.1.9	INTEGER	read-write	The physical CO switch that the BRI's come from.
INT bRINetworkProfile_AnsVoiceCall	1.3.6.1.4.1.529.23.63.1.1.10	INTEGER	read-write	When setting this field to no. the pipeline will not answer Voice call even if the call is destinated for us
INT bRINetworkProfile_ConcatNailedLines	1.3.6.1.4.1.529.23.63.1.1.11	INTEGER	read-write	When setting this field to no, BRI leased lines are concatenated, when yes, the B channels are concatenated (SUPER128)
INT bRINetworkProfile_BriAnalogEncode	1.3.6.1.4.1.529.23.63.1.1.12	INTEGER	read-write	Sets the encoding standard for digitized analog data to either u-Law or A-Law for BRI. The Defaults is to encode according to BRI switchType, this option is to override.
INT bRINetworkProfile_Action_o	1.3.6.1.4.1.529.23.63.1.1.13	INTEGER	read-write
mibbRINetworkProfile_LineInterfaceTable	1.3.6.1.4.1.529.23.63.2		not-accessible	A list of mibbRINetworkProfile__line_interface profile entries.
mibbRINetworkProfile_LineInterfaceEntry	1.3.6.1.4.1.529.23.63.2.1		not-accessible	A mibbRINetworkProfile__line_interface entry containing objects that maps to the parameters of mibbRINetworkProfile__line_interface profile.
INT bRINetworkProfile_LineInterface_Shelf_o	1.3.6.1.4.1.529.23.63.2.1.1	INTEGER	read-only
INT bRINetworkProfile_LineInterface_Slot_o	1.3.6.1.4.1.529.23.63.2.1.2	INTEGER	read-only
INT bRINetworkProfile_LineInterface_Item_o	1.3.6.1.4.1.529.23.63.2.1.3	INTEGER	read-only
INT bRINetworkProfile_LineInterface_Index_o	1.3.6.1.4.1.529.23.63.2.1.4	INTEGER	read-only
INT bRINetworkProfile_LineInterface_Enabled	1.3.6.1.4.1.529.23.63.2.1.5	INTEGER	read-write	Boolean that is TRUE if this interface is part of the set used for this network set, or FALSE otherwise.
STR bRINetworkProfile_LineInterface_AnswerNumber1	1.3.6.1.4.1.529.23.63.2.1.6	DisplayString	read-write	Phone numbers to match when routing by incoming phone number.
STR bRINetworkProfile_LineInterface_AnswerNumber2	1.3.6.1.4.1.529.23.63.2.1.7	DisplayString	read-write	Phone numbers to match when routing by incoming phone number.
INT bRINetworkProfile_LineInterface_ClockSource	1.3.6.1.4.1.529.23.63.2.1.8	INTEGER	read-write	Boolean that is TRUE if this interface can be used as the netclock source.
INT bRINetworkProfile_LineInterface_IdslBandwidth	1.3.6.1.4.1.529.23.63.2.1.9	INTEGER	read-write	Configure IDSL subscriber bandwidth available.
INT bRINetworkProfile_LineInterface_Gr303Crv	1.3.6.1.4.1.529.23.63.2.1.10	INTEGER	read-write	GR-303 CRV associated with this line
INT bRINetworkProfile_LineInterface_Gr303InterfaceGroup	1.3.6.1.4.1.529.23.63.2.1.11	INTEGER	read-write	GR-303 interface group associated with this line
INT bRINetworkProfile_LineInterface_IgnoreLineup	1.3.6.1.4.1.529.23.63.2.1.12	INTEGER	read-write	Ignore line up value for this port.
mibbRINetworkProfile_LineInterface_ChannelConfigTable	1.3.6.1.4.1.529.23.63.3		not-accessible	A list of mibbRINetworkProfile__line_interface__channel_config profile entries.
mibbRINetworkProfile_LineInterface_ChannelConfigEntry	1.3.6.1.4.1.529.23.63.3.1		not-accessible	A mibbRINetworkProfile__line_interface__channel_config entry containing objects that maps to the parameters of mibbRINetworkProfile__line_interface__channel_config profile.
INT bRINetworkProfile_LineInterface_ChannelConfig_Shelf_o	1.3.6.1.4.1.529.23.63.3.1.1	INTEGER	read-only
INT bRINetworkProfile_LineInterface_ChannelConfig_Slot_o	1.3.6.1.4.1.529.23.63.3.1.2	INTEGER	read-only
INT bRINetworkProfile_LineInterface_ChannelConfig_Item_o	1.3.6.1.4.1.529.23.63.3.1.3	INTEGER	read-only
INT bRINetworkProfile_LineInterface_ChannelConfig_Index_o	1.3.6.1.4.1.529.23.63.3.1.4	INTEGER	read-only
INT bRINetworkProfile_LineInterface_ChannelConfig_Index1_o	1.3.6.1.4.1.529.23.63.3.1.5	INTEGER	read-only
INT bRINetworkProfile_LineInterface_ChannelConfig_ChannelUsage	1.3.6.1.4.1.529.23.63.3.1.6	INTEGER	read-write	Usage of the b-channel.
INT bRINetworkProfile_LineInterface_ChannelConfig_NailedGroup	1.3.6.1.4.1.529.23.63.3.1.7	INTEGER	read-write	A number that identifies the set of channels that makes up a nailed group.

RFC description

Ascend Communications enterprise MIB module providing SNMP management and monitoring objects for Ascend networking equipment.

Start monitoring Ascend Communications (Lucent) MAX/Pipeline/TNT WAN access equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ASCEND-MIBBRITE-MIB

What Is ASCEND-MIBBRITE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description