All MIBs › ASCEND-MIBATMP-MIB › atmpProfile_MtuLimit
atmpProfile_MtuLimit
Module: ASCEND-MIBATMP-MIB
OID (symbolic): ASCEND-MIBATMP-MIB::atmpProfile_MtuLimit
OID (numeric): 1.3.6.1.4.1.529.23.42.1.1.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The maximum IP packet size that can be transmitted to a remote agent without performing pre-fragmentation. The value 0 disables this feature. If enabled, the smallest size the system will use is 68, even if a smaller size is specified. This is to comply with the minimum IP packet size requirement per RFC 791.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.529.23.42.1.1.10 snmpwalk -v2c -c public <target> ASCEND-MIBATMP-MIB::atmpProfile_MtuLimit
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.529.23.42.1.1.10.1 snmpget -v2c -c public <target> ASCEND-MIBATMP-MIB::atmpProfile_MtuLimit.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.529.23.42.1.1.10.1 i <value>
Start monitoring Ascend Communications (Lucent) MAX/Pipeline/TNT WAN access equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ASCEND-MIBATMP-MIB::atmpProfile_MtuLimit OID value, configure state conditions and alerts, and monitor any Ascend Communications (Lucent) MAX/Pipeline/TNT WAN access equipment (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.529 | ascend | ASCEND-MIB |
| 1.3.6.1.4.1.529.23 | configuration | ASCEND-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.529.23.42 | mibatmpProfile | ASCEND-MIBATMP-MIB |
| 1.3.6.1.4.1.529.23.42.1 | mibatmpProfileTable | ASCEND-MIBATMP-MIB |
| 1.3.6.1.4.1.529.23.42.1.1 | mibatmpProfileEntry | ASCEND-MIBATMP-MIB |
| 1.3.6.1.4.1.529.23.42.1.1.10 | atmpProfile_MtuLimit | ASCEND-MIBATMP-MIB |