ARUBAWIRED-CIPT-MIB

All MIBs › ARUBAWIRED-CIPT-MIB

Organization: HPE/Aruba Networking Division

Last Updated: 2020-02-07

Category: Vendor: Aruba, Wireless and WLAN

Description: Aruba wired switch ArubaOS-CX IP telephony (CIPT) LLDP-MED and PoE phone management.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ARUBAWIRED-CIPT-MIB?

This is an HPE Aruba proprietary MIB (the module description notes it originates from HP client IP tracker MIBs) for ArubaOS-CX wired switches, managing Client IP Telephony (CIPT) tracking used for LLDP-MED-based IP phone discovery and PoE-powered phone management. It exposes configuration data (global, VLAN-level, and port-level CIPT settings) as well as inventory/state data about tracked IP telephony clients discovered on the switch. Its monitoring value lies in confirming which IP phones are currently detected and tracked on which switch ports and VLANs, which is useful for validating that VoIP devices are properly recognized, powered, and following expected LLDP-MED negotiation, and for spotting phones that unexpectedly drop off the tracked-client list. It builds on standard LLDP-MED and PoE concepts (IEEE 802.3af/at, 802.1AB) even though it is implemented as an Aruba/HP proprietary MIB. It is deployed on ArubaOS-CX wired access switches in enterprise networks running VoIP/IP telephony over PoE. Engineers can download the ARUBAWIRED-CIPT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ARUBAWIRED-CIPT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Aruba ArubaOS-CX wired switch

Monitoring Examples

An administrator can poll arubaWiredCiptTrackedClients alongside arubaWiredCiptPortConfig and arubaWiredCiptVlanConfig to see which IP phones are currently tracked on each switch port and VLAN, and check arubaWiredCiptGlobalConfig to confirm CIPT tracking is enabled switch-wide. A phone disappearing from arubaWiredCiptTrackedClients while remaining physically connected would suggest an LLDP-MED negotiation or PoE power problem on that port.

What Can Be Monitored

CIPT global/VLAN/port configuration
tracked IP phone clients
per-port IP telephony client presence

Imported Objects

From ARUBAWIRED-NETWORKING-OID

wndFeatures

OBJECT-IDENTITY

From IF-MIB

InterfaceIndex

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From Q-BRIDGE-MIB

VlanIndex

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

MacAddress
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
arubaWiredCiptMIB	1.3.6.1.4.1.47196.4.1.1.3.12			This MIB module contains HP proprietary client IP tracker MIBs.
arubaWiredCiptConfig	1.3.6.1.4.1.47196.4.1.1.3.12.1
arubaWiredCiptGlobalConfig	1.3.6.1.4.1.47196.4.1.1.3.12.1.1
T/F arubaWiredCiptEnable	1.3.6.1.4.1.47196.4.1.1.3.12.1.1.1	TruthValue	read-write	Indicates whether client IP tracker is enabled or disabled. By default this object will have a value of false(2).
T/F arubaWiredCiptProbeEnable	1.3.6.1.4.1.47196.4.1.1.3.12.1.1.2	TruthValue	read-write	This object is used to enable client IP tracker probing to update client IP.
arubaWiredCiptVlanConfig	1.3.6.1.4.1.47196.4.1.1.3.12.1.2
VID arubaWiredCiptVidList	1.3.6.1.4.1.47196.4.1.1.3.12.1.2.1	VidList	read-write	A list of VLANs on which client IP tracker is enabled.
arubaWiredCiptPortConfig	1.3.6.1.4.1.47196.4.1.1.3.12.1.3
arubaWiredCiptPortTable	1.3.6.1.4.1.47196.4.1.1.3.12.1.3.1		not-accessible	Per-port configuration of Client IP tracker.
arubaWiredCiptPortEntry	1.3.6.1.4.1.47196.4.1.1.3.12.1.3.1.1		not-accessible	Client IP tracker configuration information for a single port.
NUM arubaWiredCiptPortIfIndex	1.3.6.1.4.1.47196.4.1.1.3.12.1.3.1.1.1	InterfaceIndex	not-accessible	The index value that uniquely identifies the port on which the client IP tracker entry is enabled. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex.
INT arubaWiredCiptPortEnable	1.3.6.1.4.1.47196.4.1.1.3.12.1.3.1.1.2	INTEGER	read-write	This object indicates whether client IP tracker is enabled on a port or not . The default value is auto(2)
U32 arubaWiredCiptPortUpdateInterval	1.3.6.1.4.1.47196.4.1.1.3.12.1.3.1.1.3	Unsigned32	read-write	The interval in seconds at which client IP is refreshed. The default value is 1800 seconds.
U32 arubaWiredCiptPortClientLimit	1.3.6.1.4.1.47196.4.1.1.3.12.1.3.1.1.4	Unsigned32	read-write	Maximum number of clients which can be tracked on this port. 6100 max clients - 128 6200, 6300 max clients - 2048 6400 max client - 4096
arubaWiredCiptClients	1.3.6.1.4.1.47196.4.1.1.3.12.2
arubaWiredCiptTrackedClients	1.3.6.1.4.1.47196.4.1.1.3.12.2.1
arubaWiredCiptClientTable	1.3.6.1.4.1.47196.4.1.1.3.12.2.1.1		not-accessible	Client IP tracker learnt IP addresses for a client MAC.
arubaWiredCiptClientEntry	1.3.6.1.4.1.47196.4.1.1.3.12.2.1.1.1		not-accessible	Learnt IP address of a client MAC on a port.
MAC arubaWiredCiptClientMacAddress	1.3.6.1.4.1.47196.4.1.1.3.12.2.1.1.1.1	MacAddress	not-accessible	MAC address of the client whose IP is being tracked.
VLA arubaWiredCiptClientVlanId	1.3.6.1.4.1.47196.4.1.1.3.12.2.1.1.1.2	VlanIndex	not-accessible	The VLAN on which the client IP is being tracked.
U32 arubaWiredCiptClientIpIndex	1.3.6.1.4.1.47196.4.1.1.3.12.2.1.1.1.3	Unsigned32	not-accessible	The index of IP when a client being tracked has multiple IP addresses.
IPt arubaWiredCiptClientIpAddrType	1.3.6.1.4.1.47196.4.1.1.3.12.2.1.1.1.4	InetAddressType	read-only	The address type of the InetAddress variables in this table.
IP arubaWiredCiptClientIpAddress	1.3.6.1.4.1.47196.4.1.1.3.12.2.1.1.1.5	InetAddress	read-only	Tracked IP address of the client.
NUM arubaWiredCiptClientPortIfIndex	1.3.6.1.4.1.47196.4.1.1.3.12.2.1.1.1.6	InterfaceIndex	read-only	IfIndex of the port on which client IP address is being tracked.
arubaWiredCiptConformance	1.3.6.1.4.1.47196.4.1.1.3.12.3
arubaWiredCiptGroups	1.3.6.1.4.1.47196.4.1.1.3.12.3.1
arubaWiredCiptConfigGlobalGroup	1.3.6.1.4.1.47196.4.1.1.3.12.3.1.1			A collection of objects providing global configuration of client IP tracker.
arubaWiredCiptVlanConfigGroup	1.3.6.1.4.1.47196.4.1.1.3.12.3.1.2			A collection of objects providing per VLAN configuration of client IP tracker.
arubaWiredCiptPortConfigGroup	1.3.6.1.4.1.47196.4.1.1.3.12.3.1.3			A collection of objects providing per port configuration of client IP tracker.
arubaWiredCiptTrackedClientsGroup	1.3.6.1.4.1.47196.4.1.1.3.12.3.1.4			A collection of objects providing details of client whose IP address is being tracked.
arubaWiredCiptCompliances	1.3.6.1.4.1.47196.4.1.1.3.12.3.2
arubaWiredCiptCompliance	1.3.6.1.4.1.47196.4.1.1.3.12.3.2.1			The compliance statement for HP Switches with support for arubaWired client IP tracker objects.

RFC description

Client IP Tracker (CIPT) management for monitoring IP clients on HP/Aruba Wired networks.

Start monitoring Aruba (HPE) ArubaOS-CX wired switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ARUBAWIRED-CIPT-MIB

What Is ARUBAWIRED-CIPT-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description