All MIBs › SIM-MIB
Organization: DVB Simulcrypt Technical Group
Last Updated: 1997-07-02
Category: DVB and Broadcast
Description: Manages DVB simulcrypt SIM server configuration, key exchange, and entitlement management system.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is SIM-MIB?
SIM-MIB is the standard DVB Simulcrypt Technical Group MIB configuring DVB Simulcrypt CAS (Conditional Access System) interfaces, specifically ECMG (Entitlement Control Message Generator) connections used to scramble pay-TV broadcasts. Its objects cover software/MIB/private-MIB/agent version, an ECMG table (index, IP address, TCP port, Super_CAS_ID, channel count, CW (Control Word) parity requests, errors, target CP signal, CA MIB reference), and a channel sub-table (ID, SCS IP/port, stream count, CW-PRs, errors, Super_CAS_ID, format). As a configuration/status MIB it lets a broadcast engineer confirm ECMG connectivity and error counts for a DVB Simulcrypt CAS deployment. It is deployed on DVB Simulcrypt Conditional Access System (CAS) equipment. Engineers can download the SIM-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in SIM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- DVB Simulcrypt Conditional Access System (CAS) equipment
Monitoring Examples
A broadcast engineer checks simEcmgErrs and simEcmgCwPrs to confirm ECMG connection health for scrambling a DVB pay-TV channel under Simulcrypt.
What Can Be Monitored
- ECMG connection status and control-word error counts
This MIB depends on
Imported Objects
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 | |
| enterprises |
From SNMPv2-TC
| DisplayString | |
| RowStatus | |
| TEXTUAL-CONVENTION |
How to Use in IPNetwork Monitor
Example using simEcmgChannels OID:
Select a DVB Simulcrypt Conditional Access System (CAS) equipment (ECMG connectivity/error-count status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type simEcmgChannels into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The total number of channels this ECMG is currently maintaining. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| simMIB | 1.3.6.1.4.1.2696.1.1 | The MIB module for defining DVB Simulcrypt Conditional Access System configuration information. | ||
| simMIBObjects | 1.3.6.1.4.1.2696.1.1.1 | |||
| simIdent | 1.3.6.1.4.1.2696.1.1.1.1 | |||
| STR simSofwareVersion | 1.3.6.1.4.1.2696.1.1.1.1.1 | DisplayString | read-only | This contains a display string that defines the current version of the software for this unit. |
| STR simMIBVersion | 1.3.6.1.4.1.2696.1.1.1.1.2 | DisplayString | read-only | This contains a display string that defines the current version of the MIB. |
| STR simMIBPrivateVersion | 1.3.6.1.4.1.2696.1.1.1.1.3 | DisplayString | read-only | This contains a display string that defines the current private version of the MIB. |
| STR simAgentVersion | 1.3.6.1.4.1.2696.1.1.1.1.4 | DisplayString | read-only | This contains a display string that defines the current version of the agent. |
| simECMG | 1.3.6.1.4.1.2696.1.1.1.2 | |||
| simEcmgTable | 1.3.6.1.4.1.2696.1.1.1.2.1 | not-accessible | This table specifies the IP addresses and Port numbers of ECM Generators to be used by headend managers to configure SCSs. This table is to be used in ECM Generators and ECM Generator proxies. | |
| simEcmgEntry | 1.3.6.1.4.1.2696.1.1.1.2.1.1 | not-accessible | Information about a single table entry. Depending on whether this is an ECMG agent or ECMG proxy agent different table entries can be omitted. | |
| INT simEcmgIndex | 1.3.6.1.4.1.2696.1.1.1.2.1.1.1 | INTEGER | read-only | The ECM Generator Table unique index. |
| IP simEcmgIpAddress | 1.3.6.1.4.1.2696.1.1.1.2.1.1.2 | IpAddress | read-only | IP address of the host of the ECMG. |
| INT simEcmgTcpPort | 1.3.6.1.4.1.2696.1.1.1.2.1.1.3 | INTEGER | read-only | TCP port of the ECMG. |
| SUP simEcmgSuCasId | 1.3.6.1.4.1.2696.1.1.1.2.1.1.4 | SuperCasId | read-only | The Super_VAS_ID is formed by concatenation of the CA_system_id (16 bit) and the CA_subsystem_ID (16 bit). It defines uniquely a set of ECMGs for a given SCS. |
| C32 simEcmgChannelsEx | 1.3.6.1.4.1.2696.1.1.1.2.1.1.5 | Counter32 | read-only | The total number of channels this ECMG is currently maintaining. |
| C32 simEcmgCwPrs | 1.3.6.1.4.1.2696.1.1.1.2.1.1.6 | Counter32 | read-only | The total number of CW provisioning requests received by this ECMG. |
| C32 simEcmgErrs | 1.3.6.1.4.1.2696.1.1.1.2.1.1.7 | Counter32 | read-only | The total number of communications errors for this ECMG. |
| INT simEcmgTargetCpsig | 1.3.6.1.4.1.2696.1.1.1.2.1.1.8 | INTEGER | read-only | The index into the C(P)SIG table identifying the C(P)SIG associated with this ECMG. |
| OID simEcmgCaMib | 1.3.6.1.4.1.2696.1.1.1.2.1.1.9 | OBJECT IDENTIFIER | read-only | The pointer to a provider proprietary MIB (like ifSpecific in the interfaces group of MIB II. |
| simEcmgCTable | 1.3.6.1.4.1.2696.1.1.1.2.2 | not-accessible | This table specifies information relating to ECMG/SCS channels including the IP addresses and Port numbers of SCSs communicating with the ECMG Generators. | |
| simEcmgCEntry | 1.3.6.1.4.1.2696.1.1.1.2.2.1 | not-accessible | Information about a single table entry. Depending on whether this is an ECMG agent or ECMG proxy agent different table entries can be omitted. | |
| ECM simEcmgChannelId | 1.3.6.1.4.1.2696.1.1.1.2.2.1.1 | ECMGChannelId | read-only | The ECMG/SCS Channel identifier. |
| IP simEcmgCScsIpAddress | 1.3.6.1.4.1.2696.1.1.1.2.2.1.2 | IpAddress | read-only | IP address of the SCS. |
| INT simEcmgCScsTcpPort | 1.3.6.1.4.1.2696.1.1.1.2.2.1.3 | INTEGER | read-only | TCP port of the SCS. |
| C32 simEcmgCStreams | 1.3.6.1.4.1.2696.1.1.1.2.2.1.4 | Counter32 | read-only | The total number of streams this ECMG is currently maintaining on this channel. |
| C32 simEcmgCCwPrs | 1.3.6.1.4.1.2696.1.1.1.2.2.1.5 | Counter32 | read-only | The total number of CW provisioning requests received by this ECMG on this channel. |
| C32 simEcmgCErrs | 1.3.6.1.4.1.2696.1.1.1.2.2.1.6 | Counter32 | read-only | The total number of communications errors for this ECMG on this channel. |
| ECM simEcmgCSuCasId | 1.3.6.1.4.1.2696.1.1.1.2.2.1.7 | ECMGCSuCasId | read-only | The SuperCASId of the current Channel. |
| SEC simEcmgFormat | 1.3.6.1.4.1.2696.1.1.1.2.2.1.8 | SectionTSPktFlag | read-only | Format of datagrams : section or TS Packet. |
| ECM simACDelayStart | 1.3.6.1.4.1.2696.1.1.1.2.2.1.9 | ECMGDelayValue | read-only | Value of AC_Delay_Start parameter in ECMG protocol, imposed by CAS. |
| ECM simACDelayStop | 1.3.6.1.4.1.2696.1.1.1.2.2.1.10 | ECMGDelayValue | read-only | Value of AC_Delay_Stop parameter in ECMG protocol, imposed by CAS. |
| ECM simDelayStart | 1.3.6.1.4.1.2696.1.1.1.2.2.1.11 | ECMGDelayValue | read-only | Value of Delay_Start parameter in ECMG protocol, imposed by CAS. |
| ECM simDelayStop | 1.3.6.1.4.1.2696.1.1.1.2.2.1.12 | ECMGDelayValue | read-only | Value of Delay_Stop parameter in ECMG protocol, imposed by CAS. |
| ECM simTransitionDelayStart | 1.3.6.1.4.1.2696.1.1.1.2.2.1.13 | ECMGDelayValue | read-only | Value of Transition_Delay_Start parameter in ECMG protocol, imposed by CAS. |
| ECM simTransitionDelayStop | 1.3.6.1.4.1.2696.1.1.1.2.2.1.14 | ECMGDelayValue | read-only | Value of Transition_Delay_Stop parameter in ECMG protocol, imposed by CAS. |
| INT simECMRepPeriod | 1.3.6.1.4.1.2696.1.1.1.2.2.1.15 | INTEGER | read-only | Repeating period of ECM defined by CAS and applied by SCS. |
| C32 simMaxStreams | 1.3.6.1.4.1.2696.1.1.1.2.2.1.16 | Counter32 | read-only | Max number of streams supported by the ECMG. |
| INT simMinCPDuration | 1.3.6.1.4.1.2696.1.1.1.2.2.1.17 | INTEGER | read-only | Min crypto-period length supported by the ECMG. |
| C32 simLeadCW | 1.3.6.1.4.1.2696.1.1.1.2.2.1.18 | Counter32 | read-only | Number of CW the ecmg needs in advance. |
| C32 simCWPerMsg | 1.3.6.1.4.1.2696.1.1.1.2.2.1.19 | Counter32 | read-only | Number of CW the ecmg needs in each ECM request. |
| INT simMaxCompTime | 1.3.6.1.4.1.2696.1.1.1.2.2.1.20 | INTEGER | read-only | Max delay supported by the ECMG for providing an ECM. |
| simEcmgSTable | 1.3.6.1.4.1.2696.1.1.1.2.3 | not-accessible | This table specifies information relating to ECMG/SCS streams. | |
| simEcmgSEntry | 1.3.6.1.4.1.2696.1.1.1.2.3.1 | not-accessible | Information about a single table entry. Depending on whether this is an ECMG agent or ECMG proxy agent different table entries can be omitted. | |
| STR simEcmgStreamId | 1.3.6.1.4.1.2696.1.1.1.2.3.1.1 | StreamId | read-only | The ECMG/SCS Stream identifier. |
| FLO simEcmgEcmId | 1.3.6.1.4.1.2696.1.1.1.2.3.1.2 | FlowId | read-only | The unique ECM flow identifier. |
| U32 simEcmgSLastCp | 1.3.6.1.4.1.2696.1.1.1.2.3.1.3 | Unsigned32 | read-only | The number of the crypto-period last processed on this stream. |
| C32 simEcmgSCwPrs | 1.3.6.1.4.1.2696.1.1.1.2.3.1.4 | Counter32 | read-only | The total number of CW provisioning requests received by this ECMG on this stream. |
| C32 simEcmgSErrs | 1.3.6.1.4.1.2696.1.1.1.2.3.1.5 | Counter32 | read-only | The total number of communications errors for this ECMG on this stream. |
| simEMMG | 1.3.6.1.4.1.2696.1.1.1.3 | |||
| simEmOrPdTable | 1.3.6.1.4.1.2696.1.1.1.3.1 | not-accessible | This table defines the EMMG or PDG interfaces to the MUX and is to be used in EMMGs/PDGs and optionally the multiplexer. | |
| simEmOrPdEntry | 1.3.6.1.4.1.2696.1.1.1.3.1.1 | not-accessible | Information about a single table entry. Depending on whether this is an EMMG/PDG or multiplexer agent different table entries can be omitted. | |
| INT simEmOrPdIndex | 1.3.6.1.4.1.2696.1.1.1.3.1.1.1 | INTEGER | read-only | Unique index into the EMMG or PDG table. |
| EMM simEmOrPdDataType | 1.3.6.1.4.1.2696.1.1.1.3.1.1.2 | EMMGDataType | read-only | Data_type: Type of data handled by this EMMG/PDG. |
| SUP simEmOrPdClientId | 1.3.6.1.4.1.2696.1.1.1.3.1.1.3 | SuperCasId | read-only | Client_ID: The Client_ID is a 32-bit identifier. It shall identify uniquely an EMMG/PDG across all the EMMGs/PDGs connected to a given MUX. To facilitate uniqueness of this value, the following rules apply: * In the case of EMMs or other CA related data, the two first bytes of the client_id should be equal to the two bytes of the corresponding CA_system_ID. * In other cases a value allocated by DVB for this purpose should be used. |
| EMM simEmOrPdCommCapability | 1.3.6.1.4.1.2696.1.1.1.3.1.1.4 | EMMGCommCapability | read-only | Communication capability between EMMG/PDG and the multiplexer. Currently TCP or UDP or both. |
| C32 simEmOrPdErrs | 1.3.6.1.4.1.2696.1.1.1.3.1.1.5 | Counter32 | read-only | The total number of communications errors for this EMMG/PDG. |
| INT simEmOrPdTargetCpsig | 1.3.6.1.4.1.2696.1.1.1.3.1.1.6 | INTEGER | read-create | The index into the C(P)SIG table identifying the C(P)SIG associated with this EMMG/PDG. |
| OID simEmOrPdCaMib | 1.3.6.1.4.1.2696.1.1.1.3.1.1.7 | OBJECT IDENTIFIER | read-create | Pointer to a vendor proprietary extension to the EMMG/PDG MIB group. |
| simEmOrPdLapTable | 1.3.6.1.4.1.2696.1.1.1.3.2 | not-accessible | This table is used for configuration of EMM/PD Generators. | |
| simEmOrPdLapEntry | 1.3.6.1.4.1.2696.1.1.1.3.2.1 | not-accessible | Information about a single table entry. | |
| INT simEmOrPdLapIndex | 1.3.6.1.4.1.2696.1.1.1.3.2.1.1 | INTEGER | read-only | Unique Logical Access Point (LAP) identifier. |
| ADM simEmOrPdLapAdminState | 1.3.6.1.4.1.2696.1.1.1.3.2.1.2 | AdministrativeState | read-create | Used by an authorized manager to lock a conceptual row for exclusive write and create access. |
| EMM simEmOrPdLapCommType | 1.3.6.1.4.1.2696.1.1.1.3.2.1.3 | EMMGCommType | read-create | Type of communication between EMMG/PDG and the multiplexer. Currently TCP or UDP. |
| IP simEmOrPdLapMuxIpAddress | 1.3.6.1.4.1.2696.1.1.1.3.2.1.4 | IpAddress | read-create | IP address of the multiplexer for EMMG/PDG TCP communication. |
| INT simEmOrPdLapMuxPort | 1.3.6.1.4.1.2696.1.1.1.3.2.1.5 | INTEGER | read-create | Port number (TCP) of the multiplexer for EMMG/PDG TCP communication. |
| ROW simEmOrPdLapStatus | 1.3.6.1.4.1.2696.1.1.1.3.2.1.6 | RowStatus | read-create | Used for table row creation management. |
| IP simEmOrPdLapMuxUIpAddress | 1.3.6.1.4.1.2696.1.1.1.3.2.1.7 | IpAddress | read-create | IP address of the multiplexer for EMMG/PDG UDP communication. |
| INT simEmOrPdLapMuxUPort | 1.3.6.1.4.1.2696.1.1.1.3.2.1.8 | INTEGER | read-create | Port number (UDP) of the multiplexer for EMMG/PDG UDP communication. |
| simEmOrPdLapGTable | 1.3.6.1.4.1.2696.1.1.1.3.3 | not-accessible | This table is used for configuration of EMM/PD Generators. | |
| simEmOrPdLapGEntry | 1.3.6.1.4.1.2696.1.1.1.3.3.1 | not-accessible | Information about a single table entry. | |
| INT simEmOrPdLapGroup | 1.3.6.1.4.1.2696.1.1.1.3.3.1.1 | INTEGER | read-only | Logical Access Point (LAP) group. |
| ADM simEmOrPdLapGAdminState | 1.3.6.1.4.1.2696.1.1.1.3.3.1.2 | AdministrativeState | read-create | Used by an authorized manager to lock a conceptual row for exclusive write and create access. |
| ROW simEmOrPdLapGStatus | 1.3.6.1.4.1.2696.1.1.1.3.3.1.3 | RowStatus | read-create | Used for table row creation management. |
| simEmOrPdCTable | 1.3.6.1.4.1.2696.1.1.1.3.4 | not-accessible | This table is used for monitoring of channels between Muxes and EMMGs/PDGs. | |
| simEmOrPdCEntry | 1.3.6.1.4.1.2696.1.1.1.3.4.1 | not-accessible | Information about a single table entry. | |
| EMM simEmOrPdChannelId | 1.3.6.1.4.1.2696.1.1.1.3.4.1.1 | EMMGChannelId | read-only | Data_channel_ID: This identifier uniquely identifies a EMM/Private Data channel within a client_ID. |
| EMM simEmOrPdCommType | 1.3.6.1.4.1.2696.1.1.1.3.4.1.2 | EMMGCommType | read-create | Communications type: TCP or UDP. |
| IP simEmOrPdCIpAddress | 1.3.6.1.4.1.2696.1.1.1.3.4.1.3 | IpAddress | read-only | IP address of the host of the EMMG or PDG. |
| INT simEmOrPdCPort | 1.3.6.1.4.1.2696.1.1.1.3.4.1.4 | INTEGER | read-only | Port number *TCP or UDP of the EMMG or PDG. |
| C32 simEmOrPdCErrs | 1.3.6.1.4.1.2696.1.1.1.3.4.1.5 | Counter32 | read-only | The total number of communications errors on this channel. |
| SEC simEmOrPdCFormat | 1.3.6.1.4.1.2696.1.1.1.3.4.1.6 | SectionTSPktFlag | read-only | Format of datagrams : section or TS Packet. |
| IP simEmOrPdCUIpAddress | 1.3.6.1.4.1.2696.1.1.1.3.4.1.7 | IpAddress | read-only | IP address of the host of the EMMG or PDG for UDP. |
| INT simEmOrPdCUPort | 1.3.6.1.4.1.2696.1.1.1.3.4.1.8 | INTEGER | read-only | Port number (UDP) of the EMMG or PDG. |
| simEmOrPdSTable | 1.3.6.1.4.1.2696.1.1.1.3.5 | not-accessible | This table is used for monitoring of streams between Muxes and EMMGs/PDGs. | |
| simEmOrPdSEntry | 1.3.6.1.4.1.2696.1.1.1.3.5.1 | not-accessible | Information about a single table entry. | |
| FLO simEmOrPdDataId | 1.3.6.1.4.1.2696.1.1.1.3.5.1.1 | FlowId | read-create | DataID: This identifier uniquely identifies a EMM/Private Data stream. |
| EMM simEmOrPdSChannelId | 1.3.6.1.4.1.2696.1.1.1.3.5.1.2 | EMMGChannelId | read-create | Channel identifier. |
| U32 simEmOrPdBwidth | 1.3.6.1.4.1.2696.1.1.1.3.5.1.3 | Unsigned32 | read-create | Negotiated Bandwidth. |
| STR simEmOrPdStreamId | 1.3.6.1.4.1.2696.1.1.1.3.5.1.4 | StreamId | read-only | Data_stream_ID: This identifier uniquely identifies a EMM/Private Data stream within a channel. |
| C32 simEmOrPdSErrs | 1.3.6.1.4.1.2696.1.1.1.3.5.1.5 | Counter32 | read-only | The total number of communications errors on this stream. |
| C32 simEmOrPdSBytes | 1.3.6.1.4.1.2696.1.1.1.3.5.1.6 | Counter32 | read-only | The total number of bytes sent by this EMMG/PDG on this stream. |
| U32 simEmOrPdSReqBwidth | 1.3.6.1.4.1.2696.1.1.1.3.5.1.7 | Unsigned32 | read-create | Bandwidth as requested by CAS. |
| simCPSI | 1.3.6.1.4.1.2696.1.1.1.4 | |||
| simCpsigTable | 1.3.6.1.4.1.2696.1.1.1.4.1 | not-accessible | This table defines the C(P)SIG) interfaces to the Mux and is to be used in the C(P)SIG and optionally the multiplexer. | |
| simCpsigEntry | 1.3.6.1.4.1.2696.1.1.1.4.1.1 | not-accessible | Information about a single table entry. Depending on whether this is an EMMG/PDG or multiplexer agent different table entries can be omitted. | |
| INT simCpsigIndex | 1.3.6.1.4.1.2696.1.1.1.4.1.1.1 | INTEGER | read-only | Unique index into the Cpsig table. |
| SUP simCpsigSuperCasId | 1.3.6.1.4.1.2696.1.1.1.4.1.1.2 | SuperCasId | read-only | super_CAS_id |
| C32 simCpsigErrs | 1.3.6.1.4.1.2696.1.1.1.4.1.1.3 | Counter32 | read-only | The total number of communication errors for this C(P)SIG). |
| C32 simCpsigChannels | 1.3.6.1.4.1.2696.1.1.1.4.1.1.4 | Counter32 | read-only | The total number of channels for this C(P)SIG). |
| IP simCpsigCpsigIpAddress | 1.3.6.1.4.1.2696.1.1.1.4.1.1.5 | IpAddress | read-only | The IP Address of the C(P)SIG). |
| INT simCpsigCpsigPort | 1.3.6.1.4.1.2696.1.1.1.4.1.1.6 | INTEGER | read-only | The TCP port number of the C(P)SIG). |
| OID simCpsigCaMib | 1.3.6.1.4.1.2696.1.1.1.4.1.1.7 | OBJECT IDENTIFIER | read-only | Pointer to a vendor proprietary extension to the C(P)SIG) MIB group. |
| simCpsigCTable | 1.3.6.1.4.1.2696.1.1.1.4.2 | not-accessible | This table is used for monitoring of channels between (P)SIGs and C(P)SIGs. | |
| simCpsigCEntry | 1.3.6.1.4.1.2696.1.1.1.4.2.1 | not-accessible | Information about a single table entry. | |
| INT simCpsigChannelId | 1.3.6.1.4.1.2696.1.1.1.4.2.1.1 | INTEGER | read-only | ChannelId identifies the C(P)SIG channel. |
| IP simCpsigPsigIpAddress | 1.3.6.1.4.1.2696.1.1.1.4.2.1.2 | IpAddress | read-only | IP address of the host of the (P)SIG. |
| INT simCpsigPsigPort | 1.3.6.1.4.1.2696.1.1.1.4.2.1.3 | INTEGER | read-only | TCP Port number of the (P)SIG. |
| C32 simCpsigCErrs | 1.3.6.1.4.1.2696.1.1.1.4.2.1.4 | Counter32 | read-only | The total number of communication errors on this channel. |
| C32 simCpsigCTstrms | 1.3.6.1.4.1.2696.1.1.1.4.2.1.5 | Counter32 | read-only | The total number of transport streams on this channel. |
| C32 simCpsigCSstrms | 1.3.6.1.4.1.2696.1.1.1.4.2.1.6 | Counter32 | read-only | The total number of service streams on this channel. |
| simCpsigStreamTable | 1.3.6.1.4.1.2696.1.1.1.4.3 | not-accessible | This table is used for monitoring of streams between Muxes and C(P)SIG)s. | |
| simCpsigStreamEntry | 1.3.6.1.4.1.2696.1.1.1.4.3.1 | not-accessible | Information about a single table entry. | |
| INT simCpsigStreamId | 1.3.6.1.4.1.2696.1.1.1.4.3.1.1 | INTEGER | not-accessible | This identifier uniquely identifies a C(P)SIG) stream |
| INT simCpsigStreamTStreamId | 1.3.6.1.4.1.2696.1.1.1.4.3.1.2 | INTEGER | read-only | This identifier uniquely identifies a C(P)SIG transport stream |
| INT simCpsigStreamNid | 1.3.6.1.4.1.2696.1.1.1.4.3.1.3 | INTEGER | read-only | This identifier uniquely identifies the network id associated with the stream |
| INT simCpsigStreamOnid | 1.3.6.1.4.1.2696.1.1.1.4.3.1.4 | INTEGER | read-only | This identifier uniquely identifies the original network id associated with the stream |
| INT simCpsigStreamMaxCompTime | 1.3.6.1.4.1.2696.1.1.1.4.3.1.5 | INTEGER | read-only | Max Computation time by the C(P)SIG. |
| TRI simCpsigStreamTriggerEnable | 1.3.6.1.4.1.2696.1.1.1.4.3.1.6 | TriggerType | read-only | Triggers enabled by the C(P)SIG. |
| TRI simCpsigStreamLastTrigger | 1.3.6.1.4.1.2696.1.1.1.4.3.1.7 | TriggerType | read-only | Last trigger processed by the C(P)SIG. |
| INT simCpsigStreamLastEventId | 1.3.6.1.4.1.2696.1.1.1.4.3.1.8 | INTEGER | read-only | Last event id processed by the C(P)SIG. |
| INT simCpsigStreamLastServiceId | 1.3.6.1.4.1.2696.1.1.1.4.3.1.9 | INTEGER | read-only | Last service id processed by the C(P)SIG. |
| INT simCpsigStreamLastEsId | 1.3.6.1.4.1.2696.1.1.1.4.3.1.10 | INTEGER | read-only | Last elementary stream id processed by the C(P)SIG. |
| INT simCpsigStreamLastEcmPid | 1.3.6.1.4.1.2696.1.1.1.4.3.1.11 | INTEGER | read-only | Last ECM pid processed by the C(P)SIG. |
| C32 simCpsigStreamErrs | 1.3.6.1.4.1.2696.1.1.1.4.3.1.12 | Counter32 | read-only | The total number of communication errors on this stream. |
| C32 simCpsigStreamBytes | 1.3.6.1.4.1.2696.1.1.1.4.3.1.13 | Counter32 | read-only | The total number of bytes sent by this EMMG/PDG on this stream. |
| simPSI | 1.3.6.1.4.1.2696.1.1.1.5 | |||
| simPsigTable | 1.3.6.1.4.1.2696.1.1.1.5.1 | not-accessible | This table advertises the (P)SIG configuration information. | |
| simPsigEntry | 1.3.6.1.4.1.2696.1.1.1.5.1.1 | not-accessible | Information about a single table entry. | |
| INT simPsigIndex | 1.3.6.1.4.1.2696.1.1.1.5.1.1.1 | INTEGER | read-only | The unique index into the table. |
| PSI simPsigType | 1.3.6.1.4.1.2696.1.1.1.5.1.1.2 | PsigType | read-only | Psig type |
| TRI simPsigTriggerSupport | 1.3.6.1.4.1.2696.1.1.1.5.1.1.3 | TriggerType | read-only | Identifies which trigger types the PSIG supports. |
| INT simPsigNetworkId | 1.3.6.1.4.1.2696.1.1.1.5.1.1.4 | INTEGER | read-only | Network identifier. |
| INT simPsigONetworkId | 1.3.6.1.4.1.2696.1.1.1.5.1.1.5 | INTEGER | read-only | Original Network identifier. |
| INT simPsigTransStreamId | 1.3.6.1.4.1.2696.1.1.1.5.1.1.6 | INTEGER | read-only | Transport Stream identifier. |
| OCT simPsigTSServices | 1.3.6.1.4.1.2696.1.1.1.5.1.1.7 | OCTET STRING | read-only | List of service identifies on the transport stream. |
| simPsigConfigTable | 1.3.6.1.4.1.2696.1.1.1.5.2 | not-accessible | This table configures the (P)SIG/(C)PSIG communication. | |
| simPsigConfigEntry | 1.3.6.1.4.1.2696.1.1.1.5.2.1 | not-accessible | Information about a single table entry. | |
| INT simPsigConfigIndex | 1.3.6.1.4.1.2696.1.1.1.5.2.1.1 | INTEGER | not-accessible | The unique index into the table. |
| ADM simPsigConfigAdminState | 1.3.6.1.4.1.2696.1.1.1.5.2.1.2 | AdministrativeState | read-create | Used by an authorized manager to lock a conceptual row for exclusive write and create access. |
| PSI simPsigConfigCpsigType | 1.3.6.1.4.1.2696.1.1.1.5.2.1.3 | PsigType | read-create | C(P)SIG type. |
| SUP simPsigConfigCustCasId | 1.3.6.1.4.1.2696.1.1.1.5.2.1.4 | SuperCasId | read-create | Custom CAS Identifier. |
| INT simPsigConfigMaxCompTime | 1.3.6.1.4.1.2696.1.1.1.5.2.1.5 | INTEGER | read-create | Maximum Computing Time. |
| INT simPsigConfigServiceId | 1.3.6.1.4.1.2696.1.1.1.5.2.1.6 | INTEGER | read-create | Service identifier. |
| TRI simPsigConfigTriggerEnable | 1.3.6.1.4.1.2696.1.1.1.5.2.1.7 | TriggerType | read-create | Trigger types enabled. |
| CAD simPsigConfigCADInsMode | 1.3.6.1.4.1.2696.1.1.1.5.2.1.8 | CaDescInsMode | read-create | Conditional Access Descriptor Insert mode. |
| ROW simPsigConfigEntryStatus | 1.3.6.1.4.1.2696.1.1.1.5.2.1.9 | RowStatus | read-create | Used for table row creation management. |
| simPsigEcmTrTable | 1.3.6.1.4.1.2696.1.1.1.5.3 | not-accessible | This table contains all the active ECM Triggers. | |
| simPsigEcmTrEntry | 1.3.6.1.4.1.2696.1.1.1.5.3.1 | not-accessible | Information about a single table entry. | |
| INT simPsigEcmTrIndex | 1.3.6.1.4.1.2696.1.1.1.5.3.1.1 | INTEGER | not-accessible | The trigger index. |
| INT simPsigEcmTrNetworkId | 1.3.6.1.4.1.2696.1.1.1.5.3.1.2 | INTEGER | read-create | The Network Identifier. |
| INT simPsigEcmTrONetworkId | 1.3.6.1.4.1.2696.1.1.1.5.3.1.3 | INTEGER | read-create | The Original Network Identifier. |
| INT simPsigEcmTrTransStreamId | 1.3.6.1.4.1.2696.1.1.1.5.3.1.4 | INTEGER | read-create | Transport Stream Identifier. |
| INT simPsigEcmTrServiceId | 1.3.6.1.4.1.2696.1.1.1.5.3.1.5 | INTEGER | read-create | Service Identifier. |
| INT simPsigEcmTrEsId | 1.3.6.1.4.1.2696.1.1.1.5.3.1.6 | INTEGER | read-create | Elementary Stream Identifier. |
| ECM simPsigEcmTrType | 1.3.6.1.4.1.2696.1.1.1.5.3.1.7 | ECMTriggerType | read-create | ECM Trigger Type. |
| SUP simPsigEcmTrSuCasId | 1.3.6.1.4.1.2696.1.1.1.5.3.1.8 | SuperCasId | read-create | ECM Client Identifier. |
| FLO simPsigEcmTrEcmId | 1.3.6.1.4.1.2696.1.1.1.5.3.1.9 | FlowId | read-create | ECM Stream Identifier. |
| INT simPsigEcmTrEcmPid | 1.3.6.1.4.1.2696.1.1.1.5.3.1.10 | INTEGER | read-create | ECM PID |
| OCT simPsigEcmTrAccessCriteria | 1.3.6.1.4.1.2696.1.1.1.5.3.1.11 | OCTET STRING | read-create | Access criteria. |
| simPsigFlowTrTable | 1.3.6.1.4.1.2696.1.1.1.5.4 | not-accessible | This table contains all the active Flow Triggers. | |
| simPsigFlowTrEntry | 1.3.6.1.4.1.2696.1.1.1.5.4.1 | not-accessible | Information about a single table entry. | |
| INT simPsigFlowTrIndex | 1.3.6.1.4.1.2696.1.1.1.5.4.1.1 | INTEGER | read-create | The trigger index. |
| FLO simPsigFlowTrType | 1.3.6.1.4.1.2696.1.1.1.5.4.1.2 | FlowType | read-create | Flow Type. |
| SUP simPsigFlowTrSuCasId | 1.3.6.1.4.1.2696.1.1.1.5.4.1.3 | SuperCasId | read-create | Flow Super CAS identifier. |
| FLO simPsigFlowTrFlowId | 1.3.6.1.4.1.2696.1.1.1.5.4.1.4 | FlowId | read-create | Flow Stream Identifier. |
| INT simPsigFlowTrFlowPID | 1.3.6.1.4.1.2696.1.1.1.5.4.1.5 | INTEGER | read-create | Flow PID |
| simPsigEvntTrTable | 1.3.6.1.4.1.2696.1.1.1.5.5 | not-accessible | This table contains all the active EVNT Triggers. | |
| simPsigEvntTrEntry | 1.3.6.1.4.1.2696.1.1.1.5.5.1 | not-accessible | Information about a single table entry. | |
| INT simPsigEvntTrIndex | 1.3.6.1.4.1.2696.1.1.1.5.5.1.1 | INTEGER | not-accessible | The event trigger index. |
| INT simPsigEvntTrNetworkId | 1.3.6.1.4.1.2696.1.1.1.5.5.1.2 | INTEGER | read-create | The Network Identifier. |
| INT simPsigEvntTrONetworkId | 1.3.6.1.4.1.2696.1.1.1.5.5.1.3 | INTEGER | read-create | The Original Network Identifier. |
| INT simPsigEvntTrTransStreamId | 1.3.6.1.4.1.2696.1.1.1.5.5.1.4 | INTEGER | read-create | Transport Stream Identifier. |
| INT simPsigEvntTrServiceId | 1.3.6.1.4.1.2696.1.1.1.5.5.1.5 | INTEGER | read-create | Event trigger service identifier. |
| INT simPsigEvntTrEventId | 1.3.6.1.4.1.2696.1.1.1.5.5.1.6 | INTEGER | read-create | Event Identifier. |
| OCT simPsigEvntTrStartTime | 1.3.6.1.4.1.2696.1.1.1.5.5.1.7 | OCTET STRING | read-create | Event start time. |
| OCT simPsigEvntTrDuration | 1.3.6.1.4.1.2696.1.1.1.5.5.1.8 | OCTET STRING | read-create | Event duration. |
| OCT simPsigEvntTrPrivateData | 1.3.6.1.4.1.2696.1.1.1.5.5.1.9 | OCTET STRING | read-create | EVNT Channel Identifier. |
| simPsigDescInsTable | 1.3.6.1.4.1.2696.1.1.1.5.6 | not-accessible | This table contains all the information related to descriptor insertion. | |
| simPsigDescInsEntry | 1.3.6.1.4.1.2696.1.1.1.5.6.1 | not-accessible | Information about a single table entry. | |
| INT simPsigDescInsIndex | 1.3.6.1.4.1.2696.1.1.1.5.6.1.1 | INTEGER | read-create | The unique index into the table. |
| ADM simPsigDescInsAdminState | 1.3.6.1.4.1.2696.1.1.1.5.6.1.2 | AdministrativeState | read-create | Used by an authorized manager to lock a conceptual row for exclusive write and create access. |
| INT simPsigDescInsTrIndex | 1.3.6.1.4.1.2696.1.1.1.5.6.1.3 | INTEGER | read-create | The unique index into the corresponding trigger table. |
| TRI simPsigDescInsTrType | 1.3.6.1.4.1.2696.1.1.1.5.6.1.4 | TriggerType | read-create | The type of the trigger that caused this descriptor insert. |
| INS simPsigDescInsLocationId | 1.3.6.1.4.1.2696.1.1.1.5.6.1.5 | InsertLocation | read-create | The type of target table for insertion. |
| INT simPsigDescInsNetworkId | 1.3.6.1.4.1.2696.1.1.1.5.6.1.6 | INTEGER | read-create | The Network Identifier. |
| INT simPsigDescInsONetworkId | 1.3.6.1.4.1.2696.1.1.1.5.6.1.7 | INTEGER | read-create | The Original Network Identifier. |
| INT simPsigDescInsTransStreamId | 1.3.6.1.4.1.2696.1.1.1.5.6.1.8 | INTEGER | read-create | Transport Stream Identifier. |
| INT simPsigDescInsServiceId | 1.3.6.1.4.1.2696.1.1.1.5.6.1.9 | INTEGER | read-create | Service Identifier. |
| INT simPsigDescInsElmStreamId | 1.3.6.1.4.1.2696.1.1.1.5.6.1.10 | INTEGER | read-create | Elementary stream identifier. |
| INT simPsigDescInsBouquetId | 1.3.6.1.4.1.2696.1.1.1.5.6.1.11 | INTEGER | read-create | Event trigger bouquet identifier. |
| INT simPsigDescInsEventId | 1.3.6.1.4.1.2696.1.1.1.5.6.1.12 | INTEGER | read-create | EVNT Identifier. |
| INT simPsigDescInsONetworkId2loop | 1.3.6.1.4.1.2696.1.1.1.5.6.1.13 | INTEGER | read-create | The Original Network Identifier second loop. |
| INT simPsigDescInsNetworkIdOther | 1.3.6.1.4.1.2696.1.1.1.5.6.1.14 | INTEGER | read-create | The Network Identifier other. |
| INT simPsigDescInsTransStreamId2OrO | 1.3.6.1.4.1.2696.1.1.1.5.6.1.15 | INTEGER | read-create | Transport Stream Identifier second loop or other. |
| DEL simPsigDescInsDelayType | 1.3.6.1.4.1.2696.1.1.1.5.6.1.16 | DelayType | read-create | Delay type, immediate or synchronized. |
| OCT simPsigDescInsDelay | 1.3.6.1.4.1.2696.1.1.1.5.6.1.17 | OCTET STRING | read-create | Insert delay |
| INT simPsigDescPrivDataSpfier | 1.3.6.1.4.1.2696.1.1.1.5.6.1.18 | INTEGER | read-create | Private data specifier |
| ROW simPsigDescInsEntryStatus | 1.3.6.1.4.1.2696.1.1.1.5.6.1.19 | RowStatus | read-create | Other transport stream identifiers. |
| simPsigDescInsDescTable | 1.3.6.1.4.1.2696.1.1.1.5.7 | not-accessible | This table contains all the descriptors to be inserted. | |
| simPsigDescInsDescEntry | 1.3.6.1.4.1.2696.1.1.1.5.7.1 | not-accessible | Information about a single table entry. | |
| INT simPsigDescInsDescIndex | 1.3.6.1.4.1.2696.1.1.1.5.7.1.1 | INTEGER | read-create | The unique index into the table. |
| ADM simPsigDescInsDescAdminState | 1.3.6.1.4.1.2696.1.1.1.5.7.1.2 | AdministrativeState | read-create | Used by an authorized manager to lock a conceptual row for exclusive write and create access. |
| OCT simPsigDescInsDescriptor | 1.3.6.1.4.1.2696.1.1.1.5.7.1.3 | OCTET STRING | read-create | The descriptor to be inserted. |
| DES simPsigDescInsDescriptorStatus | 1.3.6.1.4.1.2696.1.1.1.5.7.1.4 | DescriptorStatus | read-create | The insertion status of the descriptor. |
| ROW simPsigDescInsDescEntryStatus | 1.3.6.1.4.1.2696.1.1.1.5.7.1.5 | RowStatus | read-create | Other transport stream identifiers. |
| simPsigTblProvTable | 1.3.6.1.4.1.2696.1.1.1.5.8 | not-accessible | This table is the interface to obtaining all PSI/SI information. | |
| simPsigTblProvEntry | 1.3.6.1.4.1.2696.1.1.1.5.8.1 | not-accessible | Information about a single table entry. | |
| INT simPsigTblProvIndex | 1.3.6.1.4.1.2696.1.1.1.5.8.1.1 | INTEGER | read-only | The unique index into the table. |
| PRO simPsigTblProvTableId | 1.3.6.1.4.1.2696.1.1.1.5.8.1.2 | ProvTableId | read-only | The table identifier of the table. |
| INT simPsigTblNetworkId | 1.3.6.1.4.1.2696.1.1.1.5.8.1.3 | INTEGER | read-create | The Network Identifier. |
| INT simPsigTblONetworkId | 1.3.6.1.4.1.2696.1.1.1.5.8.1.4 | INTEGER | read-create | The Original Network Identifier. |
| INT simPsigTblTransStreamId | 1.3.6.1.4.1.2696.1.1.1.5.8.1.5 | INTEGER | read-create | Transport Stream Identifier. |
| INT simPsigTblServiceId | 1.3.6.1.4.1.2696.1.1.1.5.8.1.6 | INTEGER | read-create | Service Identifier. |
| INT simPsigTblBouquetId | 1.3.6.1.4.1.2696.1.1.1.5.8.1.7 | INTEGER | read-create | Event trigger bouquet identifier. |
| INT simPsigTblEventId | 1.3.6.1.4.1.2696.1.1.1.5.8.1.8 | INTEGER | read-create | Event Identifier |
| INT simPsigTblONetworkId2loop | 1.3.6.1.4.1.2696.1.1.1.5.8.1.9 | INTEGER | read-create | The Original Network Identifier second loop. |
| INT simPsigTblNetworkIdOther | 1.3.6.1.4.1.2696.1.1.1.5.8.1.10 | INTEGER | read-create | The Network Identifier other. |
| INT simPsigTblTransStreamId2OrO | 1.3.6.1.4.1.2696.1.1.1.5.8.1.11 | INTEGER | read-create | Transport Stream Identifier second loop or other. |
| INT simPsigTblSegmentNr | 1.3.6.1.4.1.2696.1.1.1.5.8.1.12 | INTEGER | read-create | Segment Number |
| OCT simPsigTblProvPart | 1.3.6.1.4.1.2696.1.1.1.5.8.1.13 | OCTET STRING | read-create | Event Identifier |
| INT simPsigTblProvPartNumber | 1.3.6.1.4.1.2696.1.1.1.5.8.1.14 | INTEGER | read-create | Each table is subdivided into parts for SNMP transport if necessary. The part number identifies the table part of this entry. |
| simPsigPIDProvTable | 1.3.6.1.4.1.2696.1.1.1.5.9 | not-accessible | This is the PID provisioning table. | |
| simPsigPIDProvEntry | 1.3.6.1.4.1.2696.1.1.1.5.9.1 | not-accessible | Information about a single table entry. | |
| FLO simPsigPIDProvFlowType | 1.3.6.1.4.1.2696.1.1.1.5.9.1.1 | FlowType | read-only | Flow Type. |
| SUP simPsigPIDProvSuCasId | 1.3.6.1.4.1.2696.1.1.1.5.9.1.2 | SuperCasId | read-only | Flow Super CAS identifier. |
| FLO simPsigPIDProvFlowId | 1.3.6.1.4.1.2696.1.1.1.5.9.1.3 | FlowId | read-only | Flow Stream Identifier. |
| INT simPsigPIDProvFlowPID | 1.3.6.1.4.1.2696.1.1.1.5.9.1.4 | INTEGER | read-only | Flow PID |
| simPsigPdTrTable | 1.3.6.1.4.1.2696.1.1.1.5.10 | not-accessible | This table contains all the active Private Data Triggers. | |
| simPsigPdTrEntry | 1.3.6.1.4.1.2696.1.1.1.5.10.1 | not-accessible | Information about a single table entry. | |
| INT simPsigPdTrIndex | 1.3.6.1.4.1.2696.1.1.1.5.10.1.1 | INTEGER | not-accessible | The trigger index. |
| INT simPsigPdTrNetworkId | 1.3.6.1.4.1.2696.1.1.1.5.10.1.2 | INTEGER | read-create | The Network Identifier. |
| INT simPsigPdTrONetworkId | 1.3.6.1.4.1.2696.1.1.1.5.10.1.3 | INTEGER | read-create | The Original Network Identifier. |
| INT simPsigPdTrTransStreamId | 1.3.6.1.4.1.2696.1.1.1.5.10.1.4 | INTEGER | read-create | Transport Stream Identifier. |
| INT simPsigPdTrServiceId | 1.3.6.1.4.1.2696.1.1.1.5.10.1.5 | INTEGER | read-create | Service Identifier. |
| INT simPsigPdTrEsId | 1.3.6.1.4.1.2696.1.1.1.5.10.1.6 | INTEGER | read-create | Elementary Stream Identifier. |
| ECM simPsigPdTrType | 1.3.6.1.4.1.2696.1.1.1.5.10.1.7 | ECMTriggerType | read-create | ECM Trigger Type. |
| SUP simPsigPdTrSuCasId | 1.3.6.1.4.1.2696.1.1.1.5.10.1.8 | SuperCasId | read-create | ECM Client Identifier. |
| FLO simPsigPdTrPdId | 1.3.6.1.4.1.2696.1.1.1.5.10.1.9 | FlowId | read-create | ECM Stream Identifier. |
| INT simPsigPdTrPdPid | 1.3.6.1.4.1.2696.1.1.1.5.10.1.10 | INTEGER | read-create | ECM PID |
| INT simPsigPdTrPdStreamType | 1.3.6.1.4.1.2696.1.1.1.5.10.1.11 | INTEGER | read-create | Stream type of Private Data Stream |
| OCT simPsigPdTrPrivateData | 1.3.6.1.4.1.2696.1.1.1.5.10.1.12 | OCTET STRING | read-create | Private Data string. |
| simMIBConformance | 1.3.6.1.4.1.2696.1.1.2 | |||
| simCompliances | 1.3.6.1.4.1.2696.1.1.2.1 | |||
| simEcmgCompliance | 1.3.6.1.4.1.2696.1.1.2.1.1 | The compliance statement for SNMP Entities which host or represent ECMGs | ||
| simEmOrPdCompliance | 1.3.6.1.4.1.2696.1.1.2.1.2 | The compliance statement for SNMP Entities which host or represent EMMGs or PDGs | ||
| simCpsigCompliance | 1.3.6.1.4.1.2696.1.1.2.1.3 | The compliance statement for SNMP Entities which host or represent C(P)SIG)s | ||
| simPsigCompliance | 1.3.6.1.4.1.2696.1.1.2.1.4 | The compliance statement for SNMP Entities which host or represent (P)SIG)s | ||
| simGroups | 1.3.6.1.4.1.2696.1.1.2.2 | |||
| simIdentGroup | 1.3.6.1.4.1.2696.1.1.2.2.1 | A collection of objects providing software configuration infomation. | ||
| simEcmgGroup | 1.3.6.1.4.1.2696.1.1.2.2.2 | A collection of objects providing ECMG infomation. | ||
| simEmOrPdGroup | 1.3.6.1.4.1.2696.1.1.2.2.3 | A collection of objects providing EMMG/PDG infomation. | ||
| simEmOrPdLapGGroup | 1.3.6.1.4.1.2696.1.1.2.2.4 | A collection of objects providing LAPG infomation. | ||
| simCpsigGroup | 1.3.6.1.4.1.2696.1.1.2.2.5 | A collection of objects providing C(P)SIG) infomation. | ||
| simPsigGroup | 1.3.6.1.4.1.2696.1.1.2.2.6 | A collection of objects providing (P)SIG) infomation. |
RFC description
DVB Simulcrypt Conditional Access System configuration information for broadcast encryption.
Start monitoring DVB Simulcrypt Conditional Access System (CAS) equipment (ECMG connectivity/error-count status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.