All MIBs › ARECA-SNMP-MIB
Description: Areca private MIB for monitoring SAS RAID subsystem health, HDD status, RAID set configuration, and volume set state on Areca storage controllers
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is ARECA-SNMP-MIB?
ARECA-SNMP-MIB is Areca's private enterprise MIB for monitoring their SAS/SATA hardware RAID controller subsystems, covering vendor/model identity, firmware/boot/MBR versions, processor type and speed, and cache sizes (instruction, data, and secondary cache). It also exposes RAID set, volume set, and HDD status information for the broader storage subsystem per its short description. Monitoring emphasis is squarely on hardware and firmware status, controller CPU model/speed, cache sizes, firmware/boot/MBR version, and physical disk/RAID health, making it a core tool for spotting a failed or degraded drive or RAID set before data loss occurs. It is a standalone vendor MIB using only generic SNMPv2-SMI imports, without dependency on other storage-standard MIBs. It is deployed on Areca hardware RAID controllers in servers and storage arrays, polled by storage management tools for proactive disk/RAID health checks. Engineers can download the ARECA-SNMP-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in ARECA-SNMP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Areca SAS/SATA RAID controller
Monitoring Examples
siVendor, siModel, siSerial, siFirmVer, siBootVer, and siMbrVer let an admin confirm the exact controller model and firmware/boot/MBR versions installed, useful when validating patch compliance across a fleet of RAID controllers. siProcessor and siCpuSpeed alongside siICache, siDCache, and siSCache expose the controller's onboard compute capability, and an admin would poll the module's RAID/HDD status objects to catch a degraded RAID set or failed HDD before an array goes offline.
What Can Be Monitored
- controller vendor/model/serial
- firmware/boot/MBR version
- processor type and speed
- cache size (instruction/data/secondary)
- RAID set status
- HDD/physical disk status
This MIB depends on
Related MIBs
Imported Objects
From RFC1155-SMI
| enterprises |
From RFC1213-MIB
| DisplayString |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| Areca | 1.3.6.1.4.1.18928 | |||
| ArecaGroup1 | 1.3.6.1.4.1.18928.1 | |||
| SASRaidSubsystem | 1.3.6.1.4.1.18928.1.2 | |||
| SystemInformation | 1.3.6.1.4.1.18928.1.2.1 | |||
| STR siVendor | 1.3.6.1.4.1.18928.1.2.1.1 | DisplayString | read-only | The vendor name of raid subsystem. |
| STR siModel | 1.3.6.1.4.1.18928.1.2.1.2 | DisplayString | read-only | The model name of raid subsystem. |
| STR siSerial | 1.3.6.1.4.1.18928.1.2.1.3 | DisplayString | read-only | The serial number of raid subsystem. |
| STR siFirmVer | 1.3.6.1.4.1.18928.1.2.1.4 | DisplayString | read-only | The firmware version of raid subsystem. |
| STR siBootVer | 1.3.6.1.4.1.18928.1.2.1.5 | DisplayString | read-only | The Boot version of raid subsystem. |
| STR siMbrVer | 1.3.6.1.4.1.18928.1.2.1.6 | DisplayString | read-only | The master boot record version of raid subsystem. |
| STR siProcessor | 1.3.6.1.4.1.18928.1.2.1.7 | DisplayString | read-only | The processor name of raid subsystem. |
| INT siCpuSpeed | 1.3.6.1.4.1.18928.1.2.1.8 | INTEGER | read-only | The CPU speed (in MHZ, e.g. 400) of Raid subsystem. |
| INT siICache | 1.3.6.1.4.1.18928.1.2.1.9 | INTEGER | read-only | The CPU internal Instruction cache size (in bytes, e.g. 32768) of Raid subsystem. |
| INT siDCache | 1.3.6.1.4.1.18928.1.2.1.10 | INTEGER | read-only | The CPU interanl data cache size (in bytes, e.g. 32768) of Raid subsystem. |
| INT siSCache | 1.3.6.1.4.1.18928.1.2.1.11 | INTEGER | read-only | The CPU secondary cache size (in bytes, e.g. 32768) of Raid subsystem. |
| INT siMemory | 1.3.6.1.4.1.18928.1.2.1.12 | INTEGER | read-only | The memory size (in MB, e.g. 128) of Raid subsystem. |
| INT siMemSpeed | 1.3.6.1.4.1.18928.1.2.1.13 | INTEGER | read-only | The memory speed (in MHz) of Raid subsystem. |
| INT siEcc | 1.3.6.1.4.1.18928.1.2.1.14 | INTEGER | read-only | The sdram ECC capability of Raid subsystem (0:no ECC, 1:ECC). |
| INT siHosts | 1.3.6.1.4.1.18928.1.2.1.15 | INTEGER | read-only | The number of host channels, e.g. 2. |
| INT siRaidSets | 1.3.6.1.4.1.18928.1.2.1.16 | INTEGER | read-only | The number of RAIDSET supported, e.g. 16. |
| INT siVolumeSets | 1.3.6.1.4.1.18928.1.2.1.17 | INTEGER | read-only | The number of VOLUMESET supported, e.g. 16. |
| INT siEvents | 1.3.6.1.4.1.18928.1.2.1.18 | INTEGER | read-only | The number of events supported, e.g. 16. |
| INT siRaid6 | 1.3.6.1.4.1.18928.1.2.1.19 | INTEGER | read-only | 0:no RAID6, 1:RAID6. |
| INT siDhcp | 1.3.6.1.4.1.18928.1.2.1.20 | INTEGER | read-only | 0:disabled, 1:enabled. |
| INT siBeeper | 1.3.6.1.4.1.18928.1.2.1.21 | INTEGER | read-only | 0:disabled, 1:enabled. |
| INT siUsage | 1.3.6.1.4.1.18928.1.2.1.22 | INTEGER | read-only | 0:normal, 1:JBOD. |
| INT siRebuildRate | 1.3.6.1.4.1.18928.1.2.1.23 | INTEGER | read-only | 5,20,50,80 in %. |
| INT siBaudRate | 1.3.6.1.4.1.18928.1.2.1.24 | INTEGER | read-only | 1200,2400,4800,9600,19200,38400,57600,115200. |
| HW_Monitor | 1.3.6.1.4.1.18928.1.2.2 | |||
| ControllerBoard | 1.3.6.1.4.1.18928.1.2.2.1 | |||
| INT hwControllerBoardInstalled | 1.3.6.1.4.1.18928.1.2.2.1.1 | INTEGER | read-only | Enclosure Installed? |
| STR hwControllerBoardDescription | 1.3.6.1.4.1.18928.1.2.2.1.2 | DisplayString | read-only | Enclosure description. |
| INT hwControllerBoardNumberOfPower | 1.3.6.1.4.1.18928.1.2.2.1.3 | INTEGER | read-only | # of power supply, e.g. 2. |
| INT hwControllerBoardNumberOfVol | 1.3.6.1.4.1.18928.1.2.2.1.4 | INTEGER | read-only | # of Voltage, e.g. 2. |
| INT hwControllerBoardNumberOfFan | 1.3.6.1.4.1.18928.1.2.2.1.5 | INTEGER | read-only | # of Fan, e.g. 2. |
| INT hwControllerBoardNumberOfTemp | 1.3.6.1.4.1.18928.1.2.2.1.6 | INTEGER | read-only | # of Temperature, e.g. 2. |
| hwControllerBoardPowerTable | 1.3.6.1.4.1.18928.1.2.2.1.7 | not-accessible | A table containing Power information. | |
| hwControllerBoardPowerEntry | 1.3.6.1.4.1.18928.1.2.2.1.7.1 | not-accessible | Information about a particular current power state. | |
| INT hwControllerBoardPowerIndex | 1.3.6.1.4.1.18928.1.2.2.1.7.1.1 | INTEGER | read-only | Power index, 1..#of powers. |
| STR hwControllerBoardPowerDesc | 1.3.6.1.4.1.18928.1.2.2.1.7.1.2 | DisplayString | read-only | Power description. |
| INT hwControllerBoardPowerState | 1.3.6.1.4.1.18928.1.2.2.1.7.1.3 | INTEGER | read-only | Power state 0:failed, 1:ok. |
| hwControllerBoardVolTable | 1.3.6.1.4.1.18928.1.2.2.1.8 | not-accessible | A table containing voltage information. | |
| hwControllerBoardVolEntry | 1.3.6.1.4.1.18928.1.2.2.1.8.1 | not-accessible | Information about a particular current voltage state. | |
| INT hwControllerBoardVolIndex | 1.3.6.1.4.1.18928.1.2.2.1.8.1.1 | INTEGER | read-only | Voltage index, 1..#of voltages. |
| STR hwControllerBoardVolDesc | 1.3.6.1.4.1.18928.1.2.2.1.8.1.2 | DisplayString | read-only | Voltage description. |
| INT hwControllerBoardVolValue | 1.3.6.1.4.1.18928.1.2.2.1.8.1.3 | INTEGER | read-only | Voltage value. |
| hwControllerBoardFanTable | 1.3.6.1.4.1.18928.1.2.2.1.9 | not-accessible | A table containing Fan information. | |
| hwControllerBoardFanEntry | 1.3.6.1.4.1.18928.1.2.2.1.9.1 | not-accessible | Information about a particular current fan state. | |
| INT hwControllerBoardFanIndex | 1.3.6.1.4.1.18928.1.2.2.1.9.1.1 | INTEGER | read-only | Fan index, 1..#of fans. |
| STR hwControllerBoardFanDesc | 1.3.6.1.4.1.18928.1.2.2.1.9.1.2 | DisplayString | read-only | Fan description. |
| INT hwControllerBoardFanSpeed | 1.3.6.1.4.1.18928.1.2.2.1.9.1.3 | INTEGER | read-only | Fan speed in RPM, e.g. 3200. |
| hwControllerBoardTempTable | 1.3.6.1.4.1.18928.1.2.2.1.10 | not-accessible | A table containing temperature information. | |
| hwControllerBoardTempEntry | 1.3.6.1.4.1.18928.1.2.2.1.10.1 | not-accessible | Information about a particular current temperature state. | |
| INT hwControllerBoardTempIndex | 1.3.6.1.4.1.18928.1.2.2.1.10.1.1 | INTEGER | read-only | Temperature index, 1..#of voltages. |
| STR hwControllerBoardTempDesc | 1.3.6.1.4.1.18928.1.2.2.1.10.1.2 | DisplayString | read-only | Temperature description. |
| INT hwControllerBoardTempValue | 1.3.6.1.4.1.18928.1.2.2.1.10.1.3 | INTEGER | read-only | Temperature value. |
| HwEnclosure1 | 1.3.6.1.4.1.18928.1.2.2.2 | |||
| INT hwEnclosure01Installed | 1.3.6.1.4.1.18928.1.2.2.2.1 | INTEGER | read-only | Enclosure Installed? |
| STR hwEnclosure01Description | 1.3.6.1.4.1.18928.1.2.2.2.2 | DisplayString | read-only | Enclosure description. |
| INT hwEnclosure01NumberOfPower | 1.3.6.1.4.1.18928.1.2.2.2.3 | INTEGER | read-only | # of power supply, e.g. 2. |
| INT hwEnclosure01NumberOfVol | 1.3.6.1.4.1.18928.1.2.2.2.4 | INTEGER | read-only | # of Voltage, e.g. 2. |
| INT hwEnclosure01NumberOfFan | 1.3.6.1.4.1.18928.1.2.2.2.5 | INTEGER | read-only | # of Fan, e.g. 2. |
| INT hwEnclosure01NumberOfTemp | 1.3.6.1.4.1.18928.1.2.2.2.6 | INTEGER | read-only | # of Temperature, e.g. 2. |
| hwEnclosure01PowerTable | 1.3.6.1.4.1.18928.1.2.2.2.7 | not-accessible | A table containing Power information. | |
| hwEnclosure01PowerEntry | 1.3.6.1.4.1.18928.1.2.2.2.7.1 | not-accessible | Information about a particular current power state. | |
| INT hwEnclosure01PowerIndex | 1.3.6.1.4.1.18928.1.2.2.2.7.1.1 | INTEGER | read-only | Power index, 1..#of powers. |
| STR hwEnclosure01PowerDesc | 1.3.6.1.4.1.18928.1.2.2.2.7.1.2 | DisplayString | read-only | Power description. |
| INT hwEnclosure01PowerState | 1.3.6.1.4.1.18928.1.2.2.2.7.1.3 | INTEGER | read-only | Power state 0:failed, 1:ok. |
| hwEnclosure01VolTable | 1.3.6.1.4.1.18928.1.2.2.2.8 | not-accessible | A table containing voltage information. | |
| hwEnclosure01VolEntry | 1.3.6.1.4.1.18928.1.2.2.2.8.1 | not-accessible | Information about a particular current voltage state. | |
| INT hwEnclosure01VolIndex | 1.3.6.1.4.1.18928.1.2.2.2.8.1.1 | INTEGER | read-only | Voltage index, 1..#of voltages. |
| STR hwEnclosure01VolDesc | 1.3.6.1.4.1.18928.1.2.2.2.8.1.2 | DisplayString | read-only | Voltage description. |
| INT hwEnclosure01VolValue | 1.3.6.1.4.1.18928.1.2.2.2.8.1.3 | INTEGER | read-only | Voltage value. |
| hwEnclosure01FanTable | 1.3.6.1.4.1.18928.1.2.2.2.9 | not-accessible | A table containing Fan information. | |
| hwEnclosure01FanEntry | 1.3.6.1.4.1.18928.1.2.2.2.9.1 | not-accessible | Information about a particular current fan state. | |
| INT hwEnclosure01FanIndex | 1.3.6.1.4.1.18928.1.2.2.2.9.1.1 | INTEGER | read-only | Fan index, 1..#of fans. |
| STR hwEnclosure01FanDesc | 1.3.6.1.4.1.18928.1.2.2.2.9.1.2 | DisplayString | read-only | Fan description. |
| INT hwEnclosure01FanSpeed | 1.3.6.1.4.1.18928.1.2.2.2.9.1.3 | INTEGER | read-only | Fan speed in RPM, e.g. 3200. |
| hwEnclosure01TempTable | 1.3.6.1.4.1.18928.1.2.2.2.10 | not-accessible | A table containing temperature information. | |
| hwEnclosure01TempEntry | 1.3.6.1.4.1.18928.1.2.2.2.10.1 | not-accessible | Information about a particular current temperature state. | |
| INT hwEnclosure01TempIndex | 1.3.6.1.4.1.18928.1.2.2.2.10.1.1 | INTEGER | read-only | Temperature index, 1..#of voltages. |
| STR hwEnclosure01TempDesc | 1.3.6.1.4.1.18928.1.2.2.2.10.1.2 | DisplayString | read-only | Temperature description. |
| INT hwEnclosure01TempValue | 1.3.6.1.4.1.18928.1.2.2.2.10.1.3 | INTEGER | read-only | Temperature value. |
| HwEnclosure2 | 1.3.6.1.4.1.18928.1.2.2.3 | |||
| INT hwEnclosure02Installed | 1.3.6.1.4.1.18928.1.2.2.3.1 | INTEGER | read-only | Enclosure Installed? |
| STR hwEnclosure02Description | 1.3.6.1.4.1.18928.1.2.2.3.2 | DisplayString | read-only | Enclosure description. |
| INT hwEnclosure02NumberOfPower | 1.3.6.1.4.1.18928.1.2.2.3.3 | INTEGER | read-only | # of power supply, e.g. 2. |
| INT hwEnclosure02NumberOfVol | 1.3.6.1.4.1.18928.1.2.2.3.4 | INTEGER | read-only | # of Voltage, e.g. 2. |
| INT hwEnclosure02NumberOfFan | 1.3.6.1.4.1.18928.1.2.2.3.5 | INTEGER | read-only | # of Fan, e.g. 2. |
| INT hwEnclosure02NumberOfTemp | 1.3.6.1.4.1.18928.1.2.2.3.6 | INTEGER | read-only | # of Temperature, e.g. 2. |
| hwEnclosure02PowerTable | 1.3.6.1.4.1.18928.1.2.2.3.7 | not-accessible | A table containing Power information. | |
| hwEnclosure02PowerEntry | 1.3.6.1.4.1.18928.1.2.2.3.7.1 | not-accessible | Information about a particular current power state. | |
| INT hwEnclosure02PowerIndex | 1.3.6.1.4.1.18928.1.2.2.3.7.1.1 | INTEGER | read-only | Power index, 1..#of powers. |
| STR hwEnclosure02PowerDesc | 1.3.6.1.4.1.18928.1.2.2.3.7.1.2 | DisplayString | read-only | Power description. |
| INT hwEnclosure02PowerState | 1.3.6.1.4.1.18928.1.2.2.3.7.1.3 | INTEGER | read-only | Power state 0:failed, 1:ok. |
| hwEnclosure02VolTable | 1.3.6.1.4.1.18928.1.2.2.3.8 | not-accessible | A table containing voltage information. | |
| hwEnclosure02VolEntry | 1.3.6.1.4.1.18928.1.2.2.3.8.1 | not-accessible | Information about a particular current voltage state. | |
| INT hwEnclosure02VolIndex | 1.3.6.1.4.1.18928.1.2.2.3.8.1.1 | INTEGER | read-only | Voltage index, 1..#of voltages. |
| STR hwEnclosure02VolDesc | 1.3.6.1.4.1.18928.1.2.2.3.8.1.2 | DisplayString | read-only | Voltage description. |
| INT hwEnclosure02VolValue | 1.3.6.1.4.1.18928.1.2.2.3.8.1.3 | INTEGER | read-only | Voltage value. |
| hwEnclosure02FanTable | 1.3.6.1.4.1.18928.1.2.2.3.9 | not-accessible | A table containing Fan information. | |
| hwEnclosure02FanEntry | 1.3.6.1.4.1.18928.1.2.2.3.9.1 | not-accessible | Information about a particular current fan state. | |
| INT hwEnclosure02FanIndex | 1.3.6.1.4.1.18928.1.2.2.3.9.1.1 | INTEGER | read-only | Fan index, 1..#of fans. |
| STR hwEnclosure02FanDesc | 1.3.6.1.4.1.18928.1.2.2.3.9.1.2 | DisplayString | read-only | Fan description. |
| INT hwEnclosure02FanSpeed | 1.3.6.1.4.1.18928.1.2.2.3.9.1.3 | INTEGER | read-only | Fan speed in RPM, e.g. 3200. |
| hwEnclosure02TempTable | 1.3.6.1.4.1.18928.1.2.2.3.10 | not-accessible | A table containing temperature information. | |
| hwEnclosure02TempEntry | 1.3.6.1.4.1.18928.1.2.2.3.10.1 | not-accessible | Information about a particular current temperature state. | |
| INT hwEnclosure02TempIndex | 1.3.6.1.4.1.18928.1.2.2.3.10.1.1 | INTEGER | read-only | Temperature index, 1..#of voltages. |
| STR hwEnclosure02TempDesc | 1.3.6.1.4.1.18928.1.2.2.3.10.1.2 | DisplayString | read-only | Temperature description. |
| INT hwEnclosure02TempValue | 1.3.6.1.4.1.18928.1.2.2.3.10.1.3 | INTEGER | read-only | Temperature value. |
| HwEnclosure3 | 1.3.6.1.4.1.18928.1.2.2.4 | |||
| INT hwEnclosure03Installed | 1.3.6.1.4.1.18928.1.2.2.4.1 | INTEGER | read-only | Enclosure Installed? |
| STR hwEnclosure03Description | 1.3.6.1.4.1.18928.1.2.2.4.2 | DisplayString | read-only | Enclosure description. |
| INT hwEnclosure03NumberOfPower | 1.3.6.1.4.1.18928.1.2.2.4.3 | INTEGER | read-only | # of power supply, e.g. 2. |
| INT hwEnclosure03NumberOfVol | 1.3.6.1.4.1.18928.1.2.2.4.4 | INTEGER | read-only | # of Voltage, e.g. 2. |
| INT hwEnclosure03NumberOfFan | 1.3.6.1.4.1.18928.1.2.2.4.5 | INTEGER | read-only | # of Fan, e.g. 2. |
| INT hwEnclosure03NumberOfTemp | 1.3.6.1.4.1.18928.1.2.2.4.6 | INTEGER | read-only | # of Temperature, e.g. 2. |
| hwEnclosure03PowerTable | 1.3.6.1.4.1.18928.1.2.2.4.7 | not-accessible | A table containing Power information. | |
| hwEnclosure03PowerEntry | 1.3.6.1.4.1.18928.1.2.2.4.7.1 | not-accessible | Information about a particular current power state. | |
| INT hwEnclosure03PowerIndex | 1.3.6.1.4.1.18928.1.2.2.4.7.1.1 | INTEGER | read-only | Power index, 1..#of powers. |
| STR hwEnclosure03PowerDesc | 1.3.6.1.4.1.18928.1.2.2.4.7.1.2 | DisplayString | read-only | Power description. |
| INT hwEnclosure03PowerState | 1.3.6.1.4.1.18928.1.2.2.4.7.1.3 | INTEGER | read-only | Power state 0:failed, 1:ok. |
| hwEnclosure03VolTable | 1.3.6.1.4.1.18928.1.2.2.4.8 | not-accessible | A table containing voltage information. | |
| hwEnclosure03VolEntry | 1.3.6.1.4.1.18928.1.2.2.4.8.1 | not-accessible | Information about a particular current voltage state. | |
| INT hwEnclosure03VolIndex | 1.3.6.1.4.1.18928.1.2.2.4.8.1.1 | INTEGER | read-only | Voltage index, 1..#of voltages. |
| STR hwEnclosure03VolDesc | 1.3.6.1.4.1.18928.1.2.2.4.8.1.2 | DisplayString | read-only | Voltage description. |
| INT hwEnclosure03VolValue | 1.3.6.1.4.1.18928.1.2.2.4.8.1.3 | INTEGER | read-only | Voltage value. |
| hwEnclosure03FanTable | 1.3.6.1.4.1.18928.1.2.2.4.9 | not-accessible | A table containing Fan information. | |
| hwEnclosure03FanEntry | 1.3.6.1.4.1.18928.1.2.2.4.9.1 | not-accessible | Information about a particular current fan state. | |
| INT hwEnclosure03FanIndex | 1.3.6.1.4.1.18928.1.2.2.4.9.1.1 | INTEGER | read-only | Fan index, 1..#of fans. |
| STR hwEnclosure03FanDesc | 1.3.6.1.4.1.18928.1.2.2.4.9.1.2 | DisplayString | read-only | Fan description. |
| INT hwEnclosure03FanSpeed | 1.3.6.1.4.1.18928.1.2.2.4.9.1.3 | INTEGER | read-only | Fan speed in RPM, e.g. 3200. |
| hwEnclosure03TempTable | 1.3.6.1.4.1.18928.1.2.2.4.10 | not-accessible | A table containing temperature information. | |
| hwEnclosure03TempEntry | 1.3.6.1.4.1.18928.1.2.2.4.10.1 | not-accessible | Information about a particular current temperature state. | |
| INT hwEnclosure03TempIndex | 1.3.6.1.4.1.18928.1.2.2.4.10.1.1 | INTEGER | read-only | Temperature index, 1..#of voltages. |
| STR hwEnclosure03TempDesc | 1.3.6.1.4.1.18928.1.2.2.4.10.1.2 | DisplayString | read-only | Temperature description. |
| INT hwEnclosure03TempValue | 1.3.6.1.4.1.18928.1.2.2.4.10.1.3 | INTEGER | read-only | Temperature value. |
| HwEnclosure4 | 1.3.6.1.4.1.18928.1.2.2.5 | |||
| INT hwEnclosure04Installed | 1.3.6.1.4.1.18928.1.2.2.5.1 | INTEGER | read-only | Enclosure Installed? |
| STR hwEnclosure04Description | 1.3.6.1.4.1.18928.1.2.2.5.2 | DisplayString | read-only | Enclosure description. |
| INT hwEnclosure04NumberOfPower | 1.3.6.1.4.1.18928.1.2.2.5.3 | INTEGER | read-only | # of power supply, e.g. 2. |
| INT hwEnclosure04NumberOfVol | 1.3.6.1.4.1.18928.1.2.2.5.4 | INTEGER | read-only | # of Voltage, e.g. 2. |
| INT hwEnclosure04NumberOfFan | 1.3.6.1.4.1.18928.1.2.2.5.5 | INTEGER | read-only | # of Fan, e.g. 2. |
| INT hwEnclosure04NumberOfTemp | 1.3.6.1.4.1.18928.1.2.2.5.6 | INTEGER | read-only | # of Temperature, e.g. 2. |
| hwEnclosure04PowerTable | 1.3.6.1.4.1.18928.1.2.2.5.7 | not-accessible | A table containing Power information. | |
| hwEnclosure04PowerEntry | 1.3.6.1.4.1.18928.1.2.2.5.7.1 | not-accessible | Information about a particular current power state. | |
| INT hwEnclosure04PowerIndex | 1.3.6.1.4.1.18928.1.2.2.5.7.1.1 | INTEGER | read-only | Power index, 1..#of powers. |
| STR hwEnclosure04PowerDesc | 1.3.6.1.4.1.18928.1.2.2.5.7.1.2 | DisplayString | read-only | Power description. |
| INT hwEnclosure04PowerState | 1.3.6.1.4.1.18928.1.2.2.5.7.1.3 | INTEGER | read-only | Power state 0:failed, 1:ok. |
| hwEnclosure04VolTable | 1.3.6.1.4.1.18928.1.2.2.5.8 | not-accessible | A table containing voltage information. | |
| hwEnclosure04VolEntry | 1.3.6.1.4.1.18928.1.2.2.5.8.1 | not-accessible | Information about a particular current voltage state. | |
| INT hwEnclosure04VolIndex | 1.3.6.1.4.1.18928.1.2.2.5.8.1.1 | INTEGER | read-only | Voltage index, 1..#of voltages. |
| STR hwEnclosure04VolDesc | 1.3.6.1.4.1.18928.1.2.2.5.8.1.2 | DisplayString | read-only | Voltage description. |
| INT hwEnclosure04VolValue | 1.3.6.1.4.1.18928.1.2.2.5.8.1.3 | INTEGER | read-only | Voltage value. |
| hwEnclosure04FanTable | 1.3.6.1.4.1.18928.1.2.2.5.9 | not-accessible | A table containing Fan information. | |
| hwEnclosure04FanEntry | 1.3.6.1.4.1.18928.1.2.2.5.9.1 | not-accessible | Information about a particular current fan state. | |
| INT hwEnclosure04FanIndex | 1.3.6.1.4.1.18928.1.2.2.5.9.1.1 | INTEGER | read-only | Fan index, 1..#of fans. |
| STR hwEnclosure04FanDesc | 1.3.6.1.4.1.18928.1.2.2.5.9.1.2 | DisplayString | read-only | Fan description. |
| INT hwEnclosure04FanSpeed | 1.3.6.1.4.1.18928.1.2.2.5.9.1.3 | INTEGER | read-only | Fan speed in RPM, e.g. 3200. |
| hwEnclosure04TempTable | 1.3.6.1.4.1.18928.1.2.2.5.10 | not-accessible | A table containing temperature information. | |
| hwEnclosure04TempEntry | 1.3.6.1.4.1.18928.1.2.2.5.10.1 | not-accessible | Information about a particular current temperature state. | |
| INT hwEnclosure04TempIndex | 1.3.6.1.4.1.18928.1.2.2.5.10.1.1 | INTEGER | read-only | Temperature index, 1..#of voltages. |
| STR hwEnclosure04TempDesc | 1.3.6.1.4.1.18928.1.2.2.5.10.1.2 | DisplayString | read-only | Temperature description. |
| INT hwEnclosure04TempValue | 1.3.6.1.4.1.18928.1.2.2.5.10.1.3 | INTEGER | read-only | Temperature value. |
| HwEnclosure5 | 1.3.6.1.4.1.18928.1.2.2.6 | |||
| INT hwEnclosure05Installed | 1.3.6.1.4.1.18928.1.2.2.6.1 | INTEGER | read-only | Enclosure Installed? |
| STR hwEnclosure05Description | 1.3.6.1.4.1.18928.1.2.2.6.2 | DisplayString | read-only | Enclosure description. |
| INT hwEnclosure05NumberOfPower | 1.3.6.1.4.1.18928.1.2.2.6.3 | INTEGER | read-only | # of power supply, e.g. 2. |
| INT hwEnclosure05NumberOfVol | 1.3.6.1.4.1.18928.1.2.2.6.4 | INTEGER | read-only | # of Voltage, e.g. 2. |
| INT hwEnclosure05NumberOfFan | 1.3.6.1.4.1.18928.1.2.2.6.5 | INTEGER | read-only | # of Fan, e.g. 2. |
| INT hwEnclosure05NumberOfTemp | 1.3.6.1.4.1.18928.1.2.2.6.6 | INTEGER | read-only | # of Temperature, e.g. 2. |
| hwEnclosure05PowerTable | 1.3.6.1.4.1.18928.1.2.2.6.7 | not-accessible | A table containing Power information. | |
| hwEnclosure05PowerEntry | 1.3.6.1.4.1.18928.1.2.2.6.7.1 | not-accessible | Information about a particular current power state. | |
| INT hwEnclosure05PowerIndex | 1.3.6.1.4.1.18928.1.2.2.6.7.1.1 | INTEGER | read-only | Power index, 1..#of powers. |
| STR hwEnclosure05PowerDesc | 1.3.6.1.4.1.18928.1.2.2.6.7.1.2 | DisplayString | read-only | Power description. |
| INT hwEnclosure05PowerState | 1.3.6.1.4.1.18928.1.2.2.6.7.1.3 | INTEGER | read-only | Power state 0:failed, 1:ok. |
| hwEnclosure05VolTable | 1.3.6.1.4.1.18928.1.2.2.6.8 | not-accessible | A table containing voltage information. | |
| hwEnclosure05VolEntry | 1.3.6.1.4.1.18928.1.2.2.6.8.1 | not-accessible | Information about a particular current voltage state. | |
| INT hwEnclosure05VolIndex | 1.3.6.1.4.1.18928.1.2.2.6.8.1.1 | INTEGER | read-only | Voltage index, 1..#of voltages. |
| STR hwEnclosure05VolDesc | 1.3.6.1.4.1.18928.1.2.2.6.8.1.2 | DisplayString | read-only | Voltage description. |
| INT hwEnclosure05VolValue | 1.3.6.1.4.1.18928.1.2.2.6.8.1.3 | INTEGER | read-only | Voltage value. |
| hwEnclosure05FanTable | 1.3.6.1.4.1.18928.1.2.2.6.9 | not-accessible | A table containing Fan information. | |
| hwEnclosure05FanEntry | 1.3.6.1.4.1.18928.1.2.2.6.9.1 | not-accessible | Information about a particular current fan state. | |
| INT hwEnclosure05FanIndex | 1.3.6.1.4.1.18928.1.2.2.6.9.1.1 | INTEGER | read-only | Fan index, 1..#of fans. |
| STR hwEnclosure05FanDesc | 1.3.6.1.4.1.18928.1.2.2.6.9.1.2 | DisplayString | read-only | Fan description. |
| INT hwEnclosure05FanSpeed | 1.3.6.1.4.1.18928.1.2.2.6.9.1.3 | INTEGER | read-only | Fan speed in RPM, e.g. 3200. |
| hwEnclosure05TempTable | 1.3.6.1.4.1.18928.1.2.2.6.10 | not-accessible | A table containing temperature information. | |
| hwEnclosure05TempEntry | 1.3.6.1.4.1.18928.1.2.2.6.10.1 | not-accessible | Information about a particular current temperature state. | |
| INT hwEnclosure05TempIndex | 1.3.6.1.4.1.18928.1.2.2.6.10.1.1 | INTEGER | read-only | Temperature index, 1..#of voltages. |
| STR hwEnclosure05TempDesc | 1.3.6.1.4.1.18928.1.2.2.6.10.1.2 | DisplayString | read-only | Temperature description. |
| INT hwEnclosure05TempValue | 1.3.6.1.4.1.18928.1.2.2.6.10.1.3 | INTEGER | read-only | Temperature value. |
| HwEnclosure6 | 1.3.6.1.4.1.18928.1.2.2.7 | |||
| INT hwEnclosure06Installed | 1.3.6.1.4.1.18928.1.2.2.7.1 | INTEGER | read-only | Enclosure Installed? |
| STR hwEnclosure06Description | 1.3.6.1.4.1.18928.1.2.2.7.2 | DisplayString | read-only | Enclosure description. |
| INT hwEnclosure06NumberOfPower | 1.3.6.1.4.1.18928.1.2.2.7.3 | INTEGER | read-only | # of power supply, e.g. 2. |
| INT hwEnclosure06NumberOfVol | 1.3.6.1.4.1.18928.1.2.2.7.4 | INTEGER | read-only | # of Voltage, e.g. 2. |
| INT hwEnclosure06NumberOfFan | 1.3.6.1.4.1.18928.1.2.2.7.5 | INTEGER | read-only | # of Fan, e.g. 2. |
| INT hwEnclosure06NumberOfTemp | 1.3.6.1.4.1.18928.1.2.2.7.6 | INTEGER | read-only | # of Temperature, e.g. 2. |
| hwEnclosure06PowerTable | 1.3.6.1.4.1.18928.1.2.2.7.7 | not-accessible | A table containing Power information. | |
| hwEnclosure06PowerEntry | 1.3.6.1.4.1.18928.1.2.2.7.7.1 | not-accessible | Information about a particular current power state. | |
| INT hwEnclosure06PowerIndex | 1.3.6.1.4.1.18928.1.2.2.7.7.1.1 | INTEGER | read-only | Power index, 1..#of powers. |
| STR hwEnclosure06PowerDesc | 1.3.6.1.4.1.18928.1.2.2.7.7.1.2 | DisplayString | read-only | Power description. |
| INT hwEnclosure06PowerState | 1.3.6.1.4.1.18928.1.2.2.7.7.1.3 | INTEGER | read-only | Power state 0:failed, 1:ok. |
| hwEnclosure06VolTable | 1.3.6.1.4.1.18928.1.2.2.7.8 | not-accessible | A table containing voltage information. | |
| hwEnclosure06VolEntry | 1.3.6.1.4.1.18928.1.2.2.7.8.1 | not-accessible | Information about a particular current voltage state. | |
| INT hwEnclosure06VolIndex | 1.3.6.1.4.1.18928.1.2.2.7.8.1.1 | INTEGER | read-only | Voltage index, 1..#of voltages. |
| STR hwEnclosure06VolDesc | 1.3.6.1.4.1.18928.1.2.2.7.8.1.2 | DisplayString | read-only | Voltage description. |
| INT hwEnclosure06VolValue | 1.3.6.1.4.1.18928.1.2.2.7.8.1.3 | INTEGER | read-only | Voltage value. |
| hwEnclosure06FanTable | 1.3.6.1.4.1.18928.1.2.2.7.9 | not-accessible | A table containing Fan information. | |
| hwEnclosure06FanEntry | 1.3.6.1.4.1.18928.1.2.2.7.9.1 | not-accessible | Information about a particular current fan state. | |
| INT hwEnclosure06FanIndex | 1.3.6.1.4.1.18928.1.2.2.7.9.1.1 | INTEGER | read-only | Fan index, 1..#of fans. |
| STR hwEnclosure06FanDesc | 1.3.6.1.4.1.18928.1.2.2.7.9.1.2 | DisplayString | read-only | Fan description. |
| INT hwEnclosure06FanSpeed | 1.3.6.1.4.1.18928.1.2.2.7.9.1.3 | INTEGER | read-only | Fan speed in RPM, e.g. 3200. |
| hwEnclosure06TempTable | 1.3.6.1.4.1.18928.1.2.2.7.10 | not-accessible | A table containing temperature information. | |
| hwEnclosure06TempEntry | 1.3.6.1.4.1.18928.1.2.2.7.10.1 | not-accessible | Information about a particular current temperature state. | |
| INT hwEnclosure06TempIndex | 1.3.6.1.4.1.18928.1.2.2.7.10.1.1 | INTEGER | read-only | Temperature index, 1..#of voltages. |
| STR hwEnclosure06TempDesc | 1.3.6.1.4.1.18928.1.2.2.7.10.1.2 | DisplayString | read-only | Temperature description. |
| INT hwEnclosure06TempValue | 1.3.6.1.4.1.18928.1.2.2.7.10.1.3 | INTEGER | read-only | Temperature value. |
| HwEnclosure7 | 1.3.6.1.4.1.18928.1.2.2.8 | |||
| INT hwEnclosure07Installed | 1.3.6.1.4.1.18928.1.2.2.8.1 | INTEGER | read-only | Enclosure Installed? |
| STR hwEnclosure07Description | 1.3.6.1.4.1.18928.1.2.2.8.2 | DisplayString | read-only | Enclosure description. |
| INT hwEnclosure07NumberOfPower | 1.3.6.1.4.1.18928.1.2.2.8.3 | INTEGER | read-only | # of power supply, e.g. 2. |
| INT hwEnclosure07NumberOfVol | 1.3.6.1.4.1.18928.1.2.2.8.4 | INTEGER | read-only | # of Voltage, e.g. 2. |
| INT hwEnclosure07NumberOfFan | 1.3.6.1.4.1.18928.1.2.2.8.5 | INTEGER | read-only | # of Fan, e.g. 2. |
| INT hwEnclosure07NumberOfTemp | 1.3.6.1.4.1.18928.1.2.2.8.6 | INTEGER | read-only | # of Temperature, e.g. 2. |
| hwEnclosure07PowerTable | 1.3.6.1.4.1.18928.1.2.2.8.7 | not-accessible | A table containing Power information. | |
| hwEnclosure07PowerEntry | 1.3.6.1.4.1.18928.1.2.2.8.7.1 | not-accessible | Information about a particular current power state. | |
| INT hwEnclosure07PowerIndex | 1.3.6.1.4.1.18928.1.2.2.8.7.1.1 | INTEGER | read-only | Power index, 1..#of powers. |
| STR hwEnclosure07PowerDesc | 1.3.6.1.4.1.18928.1.2.2.8.7.1.2 | DisplayString | read-only | Power description. |
| INT hwEnclosure07PowerState | 1.3.6.1.4.1.18928.1.2.2.8.7.1.3 | INTEGER | read-only | Power state 0:failed, 1:ok. |
| hwEnclosure07VolTable | 1.3.6.1.4.1.18928.1.2.2.8.8 | not-accessible | A table containing voltage information. | |
| hwEnclosure07VolEntry | 1.3.6.1.4.1.18928.1.2.2.8.8.1 | not-accessible | Information about a particular current voltage state. | |
| INT hwEnclosure07VolIndex | 1.3.6.1.4.1.18928.1.2.2.8.8.1.1 | INTEGER | read-only | Voltage index, 1..#of voltages. |
| STR hwEnclosure07VolDesc | 1.3.6.1.4.1.18928.1.2.2.8.8.1.2 | DisplayString | read-only | Voltage description. |
| INT hwEnclosure07VolValue | 1.3.6.1.4.1.18928.1.2.2.8.8.1.3 | INTEGER | read-only | Voltage value. |
| hwEnclosure07FanTable | 1.3.6.1.4.1.18928.1.2.2.8.9 | not-accessible | A table containing Fan information. | |
| hwEnclosure07FanEntry | 1.3.6.1.4.1.18928.1.2.2.8.9.1 | not-accessible | Information about a particular current fan state. | |
| INT hwEnclosure07FanIndex | 1.3.6.1.4.1.18928.1.2.2.8.9.1.1 | INTEGER | read-only | Fan index, 1..#of fans. |
| STR hwEnclosure07FanDesc | 1.3.6.1.4.1.18928.1.2.2.8.9.1.2 | DisplayString | read-only | Fan description. |
| INT hwEnclosure07FanSpeed | 1.3.6.1.4.1.18928.1.2.2.8.9.1.3 | INTEGER | read-only | Fan speed in RPM, e.g. 3200. |
| hwEnclosure07TempTable | 1.3.6.1.4.1.18928.1.2.2.8.10 | not-accessible | A table containing temperature information. | |
| hwEnclosure07TempEntry | 1.3.6.1.4.1.18928.1.2.2.8.10.1 | not-accessible | Information about a particular current temperature state. | |
| INT hwEnclosure07TempIndex | 1.3.6.1.4.1.18928.1.2.2.8.10.1.1 | INTEGER | read-only | Temperature index, 1..#of voltages. |
| STR hwEnclosure07TempDesc | 1.3.6.1.4.1.18928.1.2.2.8.10.1.2 | DisplayString | read-only | Temperature description. |
| INT hwEnclosure07TempValue | 1.3.6.1.4.1.18928.1.2.2.8.10.1.3 | INTEGER | read-only | Temperature value. |
| HwEnclosure8 | 1.3.6.1.4.1.18928.1.2.2.9 | |||
| INT hwEnclosure08Installed | 1.3.6.1.4.1.18928.1.2.2.9.1 | INTEGER | read-only | Enclosure Installed? |
| STR hwEnclosure08Description | 1.3.6.1.4.1.18928.1.2.2.9.2 | DisplayString | read-only | Enclosure description. |
| INT hwEnclosure08NumberOfPower | 1.3.6.1.4.1.18928.1.2.2.9.3 | INTEGER | read-only | # of power supply, e.g. 2. |
| INT hwEnclosure08NumberOfVol | 1.3.6.1.4.1.18928.1.2.2.9.4 | INTEGER | read-only | # of Voltage, e.g. 2. |
| INT hwEnclosure08NumberOfFan | 1.3.6.1.4.1.18928.1.2.2.9.5 | INTEGER | read-only | # of Fan, e.g. 2. |
| INT hwEnclosure08NumberOfTemp | 1.3.6.1.4.1.18928.1.2.2.9.6 | INTEGER | read-only | # of Temperature, e.g. 2. |
| hwEnclosure08PowerTable | 1.3.6.1.4.1.18928.1.2.2.9.7 | not-accessible | A table containing Power information. | |
| hwEnclosure08PowerEntry | 1.3.6.1.4.1.18928.1.2.2.9.7.1 | not-accessible | Information about a particular current power state. | |
| INT hwEnclosure08PowerIndex | 1.3.6.1.4.1.18928.1.2.2.9.7.1.1 | INTEGER | read-only | Power index, 1..#of powers. |
| STR hwEnclosure08PowerDesc | 1.3.6.1.4.1.18928.1.2.2.9.7.1.2 | DisplayString | read-only | Power description. |
| INT hwEnclosure08PowerState | 1.3.6.1.4.1.18928.1.2.2.9.7.1.3 | INTEGER | read-only | Power state 0:failed, 1:ok. |
| hwEnclosure08VolTable | 1.3.6.1.4.1.18928.1.2.2.9.8 | not-accessible | A table containing voltage information. | |
| hwEnclosure08VolEntry | 1.3.6.1.4.1.18928.1.2.2.9.8.1 | not-accessible | Information about a particular current voltage state. | |
| INT hwEnclosure08VolIndex | 1.3.6.1.4.1.18928.1.2.2.9.8.1.1 | INTEGER | read-only | Voltage index, 1..#of voltages. |
| STR hwEnclosure08VolDesc | 1.3.6.1.4.1.18928.1.2.2.9.8.1.2 | DisplayString | read-only | Voltage description. |
| INT hwEnclosure08VolValue | 1.3.6.1.4.1.18928.1.2.2.9.8.1.3 | INTEGER | read-only | Voltage value. |
| hwEnclosure08FanTable | 1.3.6.1.4.1.18928.1.2.2.9.9 | not-accessible | A table containing Fan information. | |
| hwEnclosure08FanEntry | 1.3.6.1.4.1.18928.1.2.2.9.9.1 | not-accessible | Information about a particular current fan state. | |
| INT hwEnclosure08FanIndex | 1.3.6.1.4.1.18928.1.2.2.9.9.1.1 | INTEGER | read-only | Fan index, 1..#of fans. |
| STR hwEnclosure08FanDesc | 1.3.6.1.4.1.18928.1.2.2.9.9.1.2 | DisplayString | read-only | Fan description. |
| INT hwEnclosure08FanSpeed | 1.3.6.1.4.1.18928.1.2.2.9.9.1.3 | INTEGER | read-only | Fan speed in RPM, e.g. 3200. |
| hwEnclosure08TempTable | 1.3.6.1.4.1.18928.1.2.2.9.10 | not-accessible | A table containing temperature information. | |
| hwEnclosure08TempEntry | 1.3.6.1.4.1.18928.1.2.2.9.10.1 | not-accessible | Information about a particular current temperature state. | |
| INT hwEnclosure08TempIndex | 1.3.6.1.4.1.18928.1.2.2.9.10.1.1 | INTEGER | read-only | Temperature index, 1..#of voltages. |
| STR hwEnclosure08TempDesc | 1.3.6.1.4.1.18928.1.2.2.9.10.1.2 | DisplayString | read-only | Temperature description. |
| INT hwEnclosure08TempValue | 1.3.6.1.4.1.18928.1.2.2.9.10.1.3 | INTEGER | read-only | Temperature value. |
| HddInformation | 1.3.6.1.4.1.18928.1.2.3 | |||
| HddEnclosure1 | 1.3.6.1.4.1.18928.1.2.3.1 | |||
| INT hddEnclosure01Installed | 1.3.6.1.4.1.18928.1.2.3.1.1 | INTEGER | read-only | Enclosure Installed? |
| STR hddEnclosure01Description | 1.3.6.1.4.1.18928.1.2.3.1.2 | DisplayString | read-only | Enclosure description. |
| INT hddEnclosure01NumberOfSlot | 1.3.6.1.4.1.18928.1.2.3.1.3 | INTEGER | read-only | # of slot |
| hddEnclosure01InfoTable | 1.3.6.1.4.1.18928.1.2.3.1.4 | not-accessible | A table containing HDD information. | |
| hddEnclosure01InfoEntry | 1.3.6.1.4.1.18928.1.2.3.1.4.1 | not-accessible | Information about a particular current HDD state. | |
| INT hddEnclosure01Slots | 1.3.6.1.4.1.18928.1.2.3.1.4.1.1 | INTEGER | read-only | HDD slot#, 1..#of HDD. |
| STR hddEnclosure01Desc | 1.3.6.1.4.1.18928.1.2.3.1.4.1.2 | DisplayString | read-only | HDD description. |
| STR hddEnclosure01Name | 1.3.6.1.4.1.18928.1.2.3.1.4.1.3 | DisplayString | read-only | HDD name. |
| STR hddEnclosure01Serial | 1.3.6.1.4.1.18928.1.2.3.1.4.1.4 | DisplayString | read-only | HDD serial number. |
| STR hddEnclosure01FirmVer | 1.3.6.1.4.1.18928.1.2.3.1.4.1.5 | DisplayString | read-only | HDD firmware reversion. |
| INT hddEnclosure01Capacity | 1.3.6.1.4.1.18928.1.2.3.1.4.1.6 | INTEGER | read-only | HDD total capacity in mega byte. |
| INT hddEnclosure01Type | 1.3.6.1.4.1.18928.1.2.3.1.4.1.7 | INTEGER | read-only | HDD Type. |
| STR hddEnclosure01State | 1.3.6.1.4.1.18928.1.2.3.1.4.1.8 | DisplayString | read-only | HDD state. |
| HddEnclosure2 | 1.3.6.1.4.1.18928.1.2.3.2 | |||
| INT hddEnclosure02Installed | 1.3.6.1.4.1.18928.1.2.3.2.1 | INTEGER | read-only | Enclosure Installed? |
| STR hddEnclosure02Description | 1.3.6.1.4.1.18928.1.2.3.2.2 | DisplayString | read-only | Enclosure description. |
| INT hddEnclosure02NumberOfSlot | 1.3.6.1.4.1.18928.1.2.3.2.3 | INTEGER | read-only | # of slot. |
| hddEnclosure02InfoTable | 1.3.6.1.4.1.18928.1.2.3.2.4 | not-accessible | A table containing HDD information. | |
| hddEnclosure02InfoEntry | 1.3.6.1.4.1.18928.1.2.3.2.4.1 | not-accessible | Information about a particular current HDD state. | |
| INT hddEnclosure02Slots | 1.3.6.1.4.1.18928.1.2.3.2.4.1.1 | INTEGER | read-only | HDD slot#, 1..#of HDD. |
| STR hddEnclosure02Desc | 1.3.6.1.4.1.18928.1.2.3.2.4.1.2 | DisplayString | read-only | HDD name. |
| STR hddEnclosure02Name | 1.3.6.1.4.1.18928.1.2.3.2.4.1.3 | DisplayString | read-only | HDD name. |
| STR hddEnclosure02Serial | 1.3.6.1.4.1.18928.1.2.3.2.4.1.4 | DisplayString | read-only | HDD serial number. |
| STR hddEnclosure02FirmVer | 1.3.6.1.4.1.18928.1.2.3.2.4.1.5 | DisplayString | read-only | HDD firmware reversion. |
| INT hddEnclosure02Capacity | 1.3.6.1.4.1.18928.1.2.3.2.4.1.6 | INTEGER | read-only | HDD total capacity in mega byte. |
| INT hddEnclosure02Type | 1.3.6.1.4.1.18928.1.2.3.2.4.1.7 | INTEGER | read-only | HDD Type. |
| STR hddEnclosure02State | 1.3.6.1.4.1.18928.1.2.3.2.4.1.8 | DisplayString | read-only | HDD state. |
| HddEnclosure3 | 1.3.6.1.4.1.18928.1.2.3.3 | |||
| INT hddEnclosure03Installed | 1.3.6.1.4.1.18928.1.2.3.3.1 | INTEGER | read-only | Enclosure Installed? |
| STR hddEnclosure03Description | 1.3.6.1.4.1.18928.1.2.3.3.2 | DisplayString | read-only | Enclosure description. |
| INT hddEnclosure03NumberOfSlot | 1.3.6.1.4.1.18928.1.2.3.3.3 | INTEGER | read-only | # of slot. |
| hddEnclosure03InfoTable | 1.3.6.1.4.1.18928.1.2.3.3.4 | not-accessible | A table containing HDD information. | |
| hddEnclosure03InfoEntry | 1.3.6.1.4.1.18928.1.2.3.3.4.1 | not-accessible | Information about a particular current HDD state. | |
| INT hddEnclosure03Slots | 1.3.6.1.4.1.18928.1.2.3.3.4.1.1 | INTEGER | read-only | HDD slot#, 1..#of HDD. |
| STR hddEnclosure03Desc | 1.3.6.1.4.1.18928.1.2.3.3.4.1.2 | DisplayString | read-only | HDD name. |
| STR hddEnclosure03Name | 1.3.6.1.4.1.18928.1.2.3.3.4.1.3 | DisplayString | read-only | HDD name. |
| STR hddEnclosure03Serial | 1.3.6.1.4.1.18928.1.2.3.3.4.1.4 | DisplayString | read-only | HDD serial number. |
| STR hddEnclosure03FirmVer | 1.3.6.1.4.1.18928.1.2.3.3.4.1.5 | DisplayString | read-only | HDD firmware reversion. |
| INT hddEnclosure03Capacity | 1.3.6.1.4.1.18928.1.2.3.3.4.1.6 | INTEGER | read-only | HDD total capacity in mega byte. |
| INT hddEnclosure03Type | 1.3.6.1.4.1.18928.1.2.3.3.4.1.7 | INTEGER | read-only | HDD Type. |
| STR hddEnclosure03State | 1.3.6.1.4.1.18928.1.2.3.3.4.1.8 | DisplayString | read-only | HDD state. |
| HddEnclosure4 | 1.3.6.1.4.1.18928.1.2.3.4 | |||
| INT hddEnclosure04Installed | 1.3.6.1.4.1.18928.1.2.3.4.1 | INTEGER | read-only | Enclosure Installed? |
| STR hddEnclosure04Description | 1.3.6.1.4.1.18928.1.2.3.4.2 | DisplayString | read-only | Enclosure description. |
| INT hddEnclosure04NumberOfSlot | 1.3.6.1.4.1.18928.1.2.3.4.3 | INTEGER | read-only | # of slot. |
| hddEnclosure04InfoTable | 1.3.6.1.4.1.18928.1.2.3.4.4 | not-accessible | A table containing HDD information. | |
| hddEnclosure04InfoEntry | 1.3.6.1.4.1.18928.1.2.3.4.4.1 | not-accessible | Information about a particular current HDD state. | |
| INT hddEnclosure04Slots | 1.3.6.1.4.1.18928.1.2.3.4.4.1.1 | INTEGER | read-only | HDD slot#, 1..#of HDD. |
| STR hddEnclosure04Desc | 1.3.6.1.4.1.18928.1.2.3.4.4.1.2 | DisplayString | read-only | HDD name. |
| STR hddEnclosure04Name | 1.3.6.1.4.1.18928.1.2.3.4.4.1.3 | DisplayString | read-only | HDD name. |
| STR hddEnclosure04Serial | 1.3.6.1.4.1.18928.1.2.3.4.4.1.4 | DisplayString | read-only | HDD serial number. |
| STR hddEnclosure04FirmVer | 1.3.6.1.4.1.18928.1.2.3.4.4.1.5 | DisplayString | read-only | HDD firmware reversion. |
| INT hddEnclosure04Capacity | 1.3.6.1.4.1.18928.1.2.3.4.4.1.6 | INTEGER | read-only | HDD total capacity in mega byte. |
| INT hddEnclosure04Type | 1.3.6.1.4.1.18928.1.2.3.4.4.1.7 | INTEGER | read-only | HDD Type. |
| STR hddEnclosure04State | 1.3.6.1.4.1.18928.1.2.3.4.4.1.8 | DisplayString | read-only | HDD state. |
| HddEnclosure5 | 1.3.6.1.4.1.18928.1.2.3.5 | |||
| INT hddEnclosure05Installed | 1.3.6.1.4.1.18928.1.2.3.5.1 | INTEGER | read-only | Enclosure Installed? |
| STR hddEnclosure05Description | 1.3.6.1.4.1.18928.1.2.3.5.2 | DisplayString | read-only | Enclosure description. |
| INT hddEnclosure05NumberOfSlot | 1.3.6.1.4.1.18928.1.2.3.5.3 | INTEGER | read-only | # of slot. |
| hddEnclosure05InfoTable | 1.3.6.1.4.1.18928.1.2.3.5.4 | not-accessible | A table containing HDD information. | |
| hddEnclosure05InfoEntry | 1.3.6.1.4.1.18928.1.2.3.5.4.1 | not-accessible | Information about a particular current HDD state. | |
| INT hddEnclosure05Slots | 1.3.6.1.4.1.18928.1.2.3.5.4.1.1 | INTEGER | read-only | HDD slot#, 1..#of HDD. |
| STR hddEnclosure05Desc | 1.3.6.1.4.1.18928.1.2.3.5.4.1.2 | DisplayString | read-only | HDD name. |
| STR hddEnclosure05Name | 1.3.6.1.4.1.18928.1.2.3.5.4.1.3 | DisplayString | read-only | HDD name. |
| STR hddEnclosure05Serial | 1.3.6.1.4.1.18928.1.2.3.5.4.1.4 | DisplayString | read-only | HDD serial number. |
| STR hddEnclosure05FirmVer | 1.3.6.1.4.1.18928.1.2.3.5.4.1.5 | DisplayString | read-only | HDD firmware reversion. |
| INT hddEnclosure05Capacity | 1.3.6.1.4.1.18928.1.2.3.5.4.1.6 | INTEGER | read-only | HDD total capacity in mega byte. |
| INT hddEnclosure05Type | 1.3.6.1.4.1.18928.1.2.3.5.4.1.7 | INTEGER | read-only | HDD Type. |
| STR hddEnclosure05State | 1.3.6.1.4.1.18928.1.2.3.5.4.1.8 | DisplayString | read-only | HDD state. |
| HddEnclosure6 | 1.3.6.1.4.1.18928.1.2.3.6 | |||
| INT hddEnclosure06Installed | 1.3.6.1.4.1.18928.1.2.3.6.1 | INTEGER | read-only | Enclosure Installed? |
| STR hddEnclosure06Description | 1.3.6.1.4.1.18928.1.2.3.6.2 | DisplayString | read-only | Enclosure description. |
| INT hddEnclosure06NumberOfSlot | 1.3.6.1.4.1.18928.1.2.3.6.3 | INTEGER | read-only | # of power supply, e.g. 2. |
| hddEnclosure06InfoTable | 1.3.6.1.4.1.18928.1.2.3.6.4 | not-accessible | A table containing HDD information. | |
| hddEnclosure06InfoEntry | 1.3.6.1.4.1.18928.1.2.3.6.4.1 | not-accessible | Information about a particular current HDD state. | |
| INT hddEnclosure06Slots | 1.3.6.1.4.1.18928.1.2.3.6.4.1.1 | INTEGER | read-only | HDD slot#, 1..#of HDD. |
| STR hddEnclosure06Desc | 1.3.6.1.4.1.18928.1.2.3.6.4.1.2 | DisplayString | read-only | HDD name. |
| STR hddEnclosure06Name | 1.3.6.1.4.1.18928.1.2.3.6.4.1.3 | DisplayString | read-only | HDD name. |
| STR hddEnclosure06Serial | 1.3.6.1.4.1.18928.1.2.3.6.4.1.4 | DisplayString | read-only | HDD serial number. |
| STR hddEnclosure06FirmVer | 1.3.6.1.4.1.18928.1.2.3.6.4.1.5 | DisplayString | read-only | HDD firmware reversion. |
| INT hddEnclosure06Capacity | 1.3.6.1.4.1.18928.1.2.3.6.4.1.6 | INTEGER | read-only | HDD total capacity in mega byte. |
| INT hddEnclosure06Type | 1.3.6.1.4.1.18928.1.2.3.6.4.1.7 | INTEGER | read-only | HDD Type. |
| STR hddEnclosure06State | 1.3.6.1.4.1.18928.1.2.3.6.4.1.8 | DisplayString | read-only | HDD state. |
| HddEnclosure7 | 1.3.6.1.4.1.18928.1.2.3.7 | |||
| INT hddEnclosure07Installed | 1.3.6.1.4.1.18928.1.2.3.7.1 | INTEGER | read-only | Enclosure Installed? |
| STR hddEnclosure07Description | 1.3.6.1.4.1.18928.1.2.3.7.2 | DisplayString | read-only | Enclosure description. |
| INT hddEnclosure07NumberOfSlot | 1.3.6.1.4.1.18928.1.2.3.7.3 | INTEGER | read-only | # of power supply, e.g. 2. |
| hddEnclosure07InfoTable | 1.3.6.1.4.1.18928.1.2.3.7.4 | not-accessible | A table containing HDD information. | |
| hddEnclosure07InfoEntry | 1.3.6.1.4.1.18928.1.2.3.7.4.1 | not-accessible | Information about a particular current HDD state. | |
| INT hddEnclosure07Slots | 1.3.6.1.4.1.18928.1.2.3.7.4.1.1 | INTEGER | read-only | HDD slot#, 1..#of HDD. |
| STR hddEnclosure07Desc | 1.3.6.1.4.1.18928.1.2.3.7.4.1.2 | DisplayString | read-only | HDD name. |
| STR hddEnclosure07Name | 1.3.6.1.4.1.18928.1.2.3.7.4.1.3 | DisplayString | read-only | HDD name. |
| STR hddEnclosure07Serial | 1.3.6.1.4.1.18928.1.2.3.7.4.1.4 | DisplayString | read-only | HDD serial number. |
| STR hddEnclosure07FirmVer | 1.3.6.1.4.1.18928.1.2.3.7.4.1.5 | DisplayString | read-only | HDD firmware reversion. |
| INT hddEnclosure07Capacity | 1.3.6.1.4.1.18928.1.2.3.7.4.1.6 | INTEGER | read-only | HDD total capacity in mega byte. |
| INT hddEnclosure07Type | 1.3.6.1.4.1.18928.1.2.3.7.4.1.7 | INTEGER | read-only | HDD Type. |
| STR hddEnclosure07State | 1.3.6.1.4.1.18928.1.2.3.7.4.1.8 | DisplayString | read-only | HDD state. |
| HddEnclosure8 | 1.3.6.1.4.1.18928.1.2.3.8 | |||
| INT hddEnclosure08Installed | 1.3.6.1.4.1.18928.1.2.3.8.1 | INTEGER | read-only | Enclosure Installed? |
| STR hddEnclosure08Description | 1.3.6.1.4.1.18928.1.2.3.8.2 | DisplayString | read-only | Enclosure description. |
| INT hddEnclosure08NumberOfSlot | 1.3.6.1.4.1.18928.1.2.3.8.3 | INTEGER | read-only | # of power supply, e.g. 2. |
| hddEnclosure08InfoTable | 1.3.6.1.4.1.18928.1.2.3.8.4 | not-accessible | A table containing HDD information. | |
| hddEnclosure08InfoEntry | 1.3.6.1.4.1.18928.1.2.3.8.4.1 | not-accessible | Information about a particular current HDD state. | |
| INT hddEnclosure08Slots | 1.3.6.1.4.1.18928.1.2.3.8.4.1.1 | INTEGER | read-only | HDD slot#, 1..#of HDD. |
| STR hddEnclosure08Desc | 1.3.6.1.4.1.18928.1.2.3.8.4.1.2 | DisplayString | read-only | HDD name. |
| STR hddEnclosure08Name | 1.3.6.1.4.1.18928.1.2.3.8.4.1.3 | DisplayString | read-only | HDD name. |
| STR hddEnclosure08Serial | 1.3.6.1.4.1.18928.1.2.3.8.4.1.4 | DisplayString | read-only | HDD serial number. |
| STR hddEnclosure08FirmVer | 1.3.6.1.4.1.18928.1.2.3.8.4.1.5 | DisplayString | read-only | HDD firmware reversion. |
| INT hddEnclosure08Capacity | 1.3.6.1.4.1.18928.1.2.3.8.4.1.6 | INTEGER | read-only | HDD total capacity in mega byte. |
| INT hddEnclosure08Type | 1.3.6.1.4.1.18928.1.2.3.8.4.1.7 | INTEGER | read-only | HDD Type. |
| STR hddEnclosure08State | 1.3.6.1.4.1.18928.1.2.3.8.4.1.8 | DisplayString | read-only | HDD state. |
| RaidsetInformation | 1.3.6.1.4.1.18928.1.2.4 | |||
| raidInfoTable | 1.3.6.1.4.1.18928.1.2.4.1 | not-accessible | A table containing RaidSet information. | |
| raidInfoEntry | 1.3.6.1.4.1.18928.1.2.4.1.1 | not-accessible | Information about a particular current RaidSet state. | |
| INT raidNumber | 1.3.6.1.4.1.18928.1.2.4.1.1.1 | INTEGER | read-only | RiadSet#, 0..#raidset-1. |
| STR raidName | 1.3.6.1.4.1.18928.1.2.4.1.1.2 | DisplayString | read-only | Raid set name. |
| INT raidDisks | 1.3.6.1.4.1.18928.1.2.4.1.1.3 | INTEGER | read-only | Member disks. |
| STR raidState | 1.3.6.1.4.1.18928.1.2.4.1.1.4 | DisplayString | read-only | Raid state. |
| INT raidTotalCapacity | 1.3.6.1.4.1.18928.1.2.4.1.1.5 | INTEGER | read-only | RaidSet total capacity in MB, totla capacity. |
| INT raidFreeCapacity | 1.3.6.1.4.1.18928.1.2.4.1.1.6 | INTEGER | read-only | RaidSet free capacity in MB, totla capacity. |
| INT raidMemberDiskCapacity | 1.3.6.1.4.1.18928.1.2.4.1.1.7 | INTEGER | read-only | RaidSet member disk capacity in MB, totla capacity. |
| STR raidMemberDiskChannels | 1.3.6.1.4.1.18928.1.2.4.1.1.8 | DisplayString | read-only | Member disk channels. |
| VolumesetInformation | 1.3.6.1.4.1.18928.1.2.5 | |||
| volInfoTable | 1.3.6.1.4.1.18928.1.2.5.1 | not-accessible | A table containing VolumeSet information. | |
| volInfoEntry | 1.3.6.1.4.1.18928.1.2.5.1.1 | not-accessible | Information about a particular current VolumeSet state. | |
| INT volNumber | 1.3.6.1.4.1.18928.1.2.5.1.1.1 | INTEGER | read-only | Volume number, 0..#of volume-1. |
| STR volName | 1.3.6.1.4.1.18928.1.2.5.1.1.2 | DisplayString | read-only | Volume name. |
| STR volRaidName | 1.3.6.1.4.1.18928.1.2.5.1.1.3 | DisplayString | read-only | Raid name. |
| INT volCapacity | 1.3.6.1.4.1.18928.1.2.5.1.1.4 | INTEGER | read-only | In MB, Capacity. |
| STR volState | 1.3.6.1.4.1.18928.1.2.5.1.1.5 | DisplayString | read-only | VolumeSet state. |
| INT volProgress | 1.3.6.1.4.1.18928.1.2.5.1.1.6 | INTEGER | read-only | percentage. |
| INT volCluster | 1.3.6.1.4.1.18928.1.2.5.1.1.7 | INTEGER | read-only | Clustering, 0:no, 1:yes. |
| INT volChannel | 1.3.6.1.4.1.18928.1.2.5.1.1.8 | INTEGER | read-only | SCSI Channel,0,1. |
| INT volSCSIID | 1.3.6.1.4.1.18928.1.2.5.1.1.9 | INTEGER | read-only | SCSI ID, 0..15. |
| INT volSCSILUN | 1.3.6.1.4.1.18928.1.2.5.1.1.10 | INTEGER | read-only | SCSI LUN, 0..7. |
| STR volRaidLevel | 1.3.6.1.4.1.18928.1.2.5.1.1.11 | DisplayString | read-only | Raid Level, 0,1,3,5,6,30,50,60. |
| INT volStripes | 1.3.6.1.4.1.18928.1.2.5.1.1.12 | INTEGER | read-only | Stripe size, in bytes. |
| INT volDisks | 1.3.6.1.4.1.18928.1.2.5.1.1.13 | INTEGER | read-only | Disks. |
| INT volCache | 1.3.6.1.4.1.18928.1.2.5.1.1.14 | INTEGER | read-only | Cache enabled, 0:no, 1:yes. |
| INT volTag | 1.3.6.1.4.1.18928.1.2.5.1.1.15 | INTEGER | read-only | Tag enabled, 0:no, 1:yes. |
| STR volMaxSpeed | 1.3.6.1.4.1.18928.1.2.5.1.1.16 | DisplayString | read-only | Max speed. |
| STR volCurrentSpeed | 1.3.6.1.4.1.18928.1.2.5.1.1.17 | DisplayString | read-only | Current speed. |
| EventInformation | 1.3.6.1.4.1.18928.1.2.6 | |||
| eventInfoTable | 1.3.6.1.4.1.18928.1.2.6.1 | not-accessible | A table containing Event information. | |
| eventInfoEntry | 1.3.6.1.4.1.18928.1.2.6.1.1 | not-accessible | Information about a particular current event. | |
| INT eventNumber | 1.3.6.1.4.1.18928.1.2.6.1.1.1 | INTEGER | read-only | Event number, 0..#events-1. |
| STR eventString | 1.3.6.1.4.1.18928.1.2.6.1.1.2 | DisplayString | read-only | Event string. |
| raidSubSysTraps | 1.3.6.1.4.1.18928.1.2.7 | |||
| NTF rsCreate | 1.3.6.1.4.1.18928.1.2.7.0.128 | %s. | ||
| NTF rsDelete | 1.3.6.1.4.1.18928.1.2.7.0.129 | %s. | ||
| NTF rsExpand | 1.3.6.1.4.1.18928.1.2.7.0.130 | %s. | ||
| NTF rsRebuild | 1.3.6.1.4.1.18928.1.2.7.0.131 | %s. | ||
| NTF rsDegraded | 1.3.6.1.4.1.18928.1.2.7.0.132 | %s. | ||
| NTF rsNoEvent | 1.3.6.1.4.1.18928.1.2.7.0.133 | %s. | ||
| NTF vsInitializing | 1.3.6.1.4.1.18928.1.2.7.0.256 | %s. | ||
| NTF vsRebuilding | 1.3.6.1.4.1.18928.1.2.7.0.257 | %s. | ||
| NTF vsMigrating | 1.3.6.1.4.1.18928.1.2.7.0.258 | %s. | ||
| NTF vsChecking | 1.3.6.1.4.1.18928.1.2.7.0.259 | %s. | ||
| NTF vsCompleteInit | 1.3.6.1.4.1.18928.1.2.7.0.260 | %s. | ||
| NTF vsCompleteRebuild | 1.3.6.1.4.1.18928.1.2.7.0.261 | %s. | ||
| NTF vsCompleteMigrating | 1.3.6.1.4.1.18928.1.2.7.0.262 | %s. | ||
| NTF vsCompleteChecking | 1.3.6.1.4.1.18928.1.2.7.0.263 | %s. | ||
| NTF vsCreate | 1.3.6.1.4.1.18928.1.2.7.0.264 | %s. | ||
| NTF vsDelete | 1.3.6.1.4.1.18928.1.2.7.0.265 | %s. | ||
| NTF vsModify | 1.3.6.1.4.1.18928.1.2.7.0.266 | %s. | ||
| NTF vsDegraded | 1.3.6.1.4.1.18928.1.2.7.0.267 | %s. | ||
| NTF vsFailed | 1.3.6.1.4.1.18928.1.2.7.0.268 | %s. | ||
| NTF vsRevived | 1.3.6.1.4.1.18928.1.2.7.0.269 | %s. | ||
| NTF vsTotals | 1.3.6.1.4.1.18928.1.2.7.0.270 | %s. | ||
| NTF pdAdded | 1.3.6.1.4.1.18928.1.2.7.0.384 | %s. | ||
| NTF pdRemoved | 1.3.6.1.4.1.18928.1.2.7.0.385 | %s. | ||
| NTF pdReadError | 1.3.6.1.4.1.18928.1.2.7.0.386 | %s. | ||
| NTF pdWriteError | 1.3.6.1.4.1.18928.1.2.7.0.387 | %s. | ||
| NTF pdAtaEccError | 1.3.6.1.4.1.18928.1.2.7.0.388 | %s. | ||
| NTF pdAtaChangeMode | 1.3.6.1.4.1.18928.1.2.7.0.389 | %s. | ||
| NTF pdTimeOut | 1.3.6.1.4.1.18928.1.2.7.0.390 | %s. | ||
| NTF pdMarkFailed | 1.3.6.1.4.1.18928.1.2.7.0.391 | %s. | ||
| NTF pdPciError | 1.3.6.1.4.1.18928.1.2.7.0.392 | %s. | ||
| NTF pdSmartFailed | 1.3.6.1.4.1.18928.1.2.7.0.393 | %s. | ||
| NTF pdCreatePass | 1.3.6.1.4.1.18928.1.2.7.0.394 | %s. | ||
| NTF pdModifyPass | 1.3.6.1.4.1.18928.1.2.7.0.395 | %s. | ||
| NTF pdDeletePass | 1.3.6.1.4.1.18928.1.2.7.0.396 | %s. | ||
| NTF pdTotals | 1.3.6.1.4.1.18928.1.2.7.0.397 | %s. | ||
| NTF scsiReset | 1.3.6.1.4.1.18928.1.2.7.0.512 | %s. | ||
| NTF scsiParity | 1.3.6.1.4.1.18928.1.2.7.0.513 | %s. | ||
| NTF scsiModeChange | 1.3.6.1.4.1.18928.1.2.7.0.514 | %s. | ||
| NTF scsiTotals | 1.3.6.1.4.1.18928.1.2.7.0.515 | %s. | ||
| NTF hwSdram1BitEcc | 1.3.6.1.4.1.18928.1.2.7.0.640 | %s. | ||
| NTF hwSdramMultiBitEcc | 1.3.6.1.4.1.18928.1.2.7.0.641 | %s. | ||
| NTF hwTempController | 1.3.6.1.4.1.18928.1.2.7.0.642 | %s. | ||
| NTF hwTempBackplane | 1.3.6.1.4.1.18928.1.2.7.0.643 | %s. | ||
| NTF hwVoltage15 | 1.3.6.1.4.1.18928.1.2.7.0.644 | %s. | ||
| NTF hwVoltage3 | 1.3.6.1.4.1.18928.1.2.7.0.645 | %s. | ||
| NTF hwVoltage5 | 1.3.6.1.4.1.18928.1.2.7.0.646 | %s. | ||
| NTF hwVoltage12 | 1.3.6.1.4.1.18928.1.2.7.0.647 | %s. | ||
| NTF hwVoltage1_3 | 1.3.6.1.4.1.18928.1.2.7.0.648 | %s. | ||
| NTF hwVoltage2_5 | 1.3.6.1.4.1.18928.1.2.7.0.649 | %s. | ||
| NTF hwVoltage1_25 | 1.3.6.1.4.1.18928.1.2.7.0.650 | %s. | ||
| NTF hwPower1Failed | 1.3.6.1.4.1.18928.1.2.7.0.651 | %s. | ||
| NTF hwFan1Failed | 1.3.6.1.4.1.18928.1.2.7.0.652 | %s. | ||
| NTF hwPower2Failed | 1.3.6.1.4.1.18928.1.2.7.0.653 | %s. | ||
| NTF hwFan2Failed | 1.3.6.1.4.1.18928.1.2.7.0.654 | %s. | ||
| NTF hwPower3Failed | 1.3.6.1.4.1.18928.1.2.7.0.655 | %s. | ||
| NTF hwFan3Failed | 1.3.6.1.4.1.18928.1.2.7.0.656 | %s. | ||
| NTF hwPower4Failed | 1.3.6.1.4.1.18928.1.2.7.0.657 | %s. | ||
| NTF hwFan4Failed | 1.3.6.1.4.1.18928.1.2.7.0.658 | %s. | ||
| NTF hwUpsPowerLoss | 1.3.6.1.4.1.18928.1.2.7.0.659 | %s. | ||
| NTF hwTempController_R | 1.3.6.1.4.1.18928.1.2.7.0.660 | %s. | ||
| NTF hwTempBackplane_R | 1.3.6.1.4.1.18928.1.2.7.0.661 | %s. | ||
| NTF hwVoltage15_R | 1.3.6.1.4.1.18928.1.2.7.0.662 | %s. | ||
| NTF hwVoltage3_R | 1.3.6.1.4.1.18928.1.2.7.0.663 | %s. | ||
| NTF hwVoltage5_R | 1.3.6.1.4.1.18928.1.2.7.0.664 | %s. | ||
| NTF hwVoltage12_R | 1.3.6.1.4.1.18928.1.2.7.0.665 | %s. | ||
| NTF hwVoltage1_3_R | 1.3.6.1.4.1.18928.1.2.7.0.666 | %s. | ||
| NTF hwVoltage2_5_R | 1.3.6.1.4.1.18928.1.2.7.0.667 | %s. | ||
| NTF hwVoltage1_25_R | 1.3.6.1.4.1.18928.1.2.7.0.668 | %s. | ||
| NTF hwPower1Failed_R | 1.3.6.1.4.1.18928.1.2.7.0.669 | %s. | ||
| NTF hwFan1Failed_R | 1.3.6.1.4.1.18928.1.2.7.0.670 | %s. | ||
| NTF hwPower2Failed_R | 1.3.6.1.4.1.18928.1.2.7.0.671 | %s. | ||
| NTF hwFan2Failed_R | 1.3.6.1.4.1.18928.1.2.7.0.672 | %s. | ||
| NTF hwPower3Failed_R | 1.3.6.1.4.1.18928.1.2.7.0.673 | %s. | ||
| NTF hwFan3Failed_R | 1.3.6.1.4.1.18928.1.2.7.0.674 | %s. | ||
| NTF hwPower4Failed_R | 1.3.6.1.4.1.18928.1.2.7.0.675 | %s. | ||
| NTF hwFan4Failed_R | 1.3.6.1.4.1.18928.1.2.7.0.676 | %s. |
RFC description
MIB module for monitoring Areca SAS RAID subsystems including system information, hardware monitoring, drives, RAID sets, and events.
Start monitoring Areca SAS/SATA RAID controllers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.