All MIBs › GSMP-SERVICE-MIB
Organization: Andong National University (ANU)
Last Updated: 2002-10-23
Description: GSMP-SERVICE-MIB module
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is GSMP-SERVICE-MIB?
This MIB module defines managed objects for General Switch Management Protocol (GSMP) interfaces, a control-plane protocol historically used to let an external controller manage ATM or label switches. It exposes network management service data related to GSMP sessions and interfaces between a GSMP controller and switch. Given the protocol-control nature of GSMP, its monitoring value centers on the software/protocol status of GSMP sessions, whether a controller-to-switch adjacency is established and operating correctly, rather than physical hardware sensors. GSMP itself is defined by IETF RFCs, so this MIB likely builds on those protocol definitions and may relate to underlying ATM or Ethernet interface MIBs. It is deployed on ATM switches or GSMP-controlled switching fabric elements in service provider networks using external switch controllers, as defined in the GSMP-SERVICE-MIB RFC that this module implements.
IPNetwork Monitor allows you to monitor SNMP objects defined in GSMP-SERVICE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- ATM or label switches under GSMP external controller management
- vendor-neutral, standards-based MIB, not tied to a specific manufacturer
Monitoring Examples
An administrator would poll GSMP interface/session status objects to confirm a controller has successfully established a GSMP adjacency with a given switch. Session state transitions would be monitored to detect a controller losing contact with a managed switch. Because GSMP is protocol-control oriented, any session flapping detected here would prompt investigation into underlying link or controller software issues.
What Can Be Monitored
- GSMP session/adjacency status
- controller-to-switch connection state
- GSMP interface configuration
This MIB depends on
Related MIBs
Imported Objects
From IF-MIB
| InterfaceIndex | |
| InterfaceIndexOrZero |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter64 | |
| Integer32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| Unsigned32 | |
| mib-2 | |
| zeroDotZero |
From SNMPv2-TC
| RowPointer | |
| RowStatus | |
| StorageType | |
| TEXTUAL-CONVENTION | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| gsmpServiceMIB | 1.3.6.1.2.1.9912 | This MIB contains managed object definitions for network management services in General Switch Management Protocol (GSMP) Interface. | ||
| gsmpServiceObjects | 1.3.6.1.2.1.9912.1 | |||
| gsmpSwitchConfTable | 1.3.6.1.2.1.9912.1.1 | not-accessible | This table represents the information of switch configuration. | |
| gsmpSwitchConfEntry | 1.3.6.1.2.1.9912.1.1.1 | not-accessible | The entry of this table is mapped with the each switch partition. | |
| I32 gsmpSwitchPartitionIndex | 1.3.6.1.2.1.9912.1.1.1.1 | Integer32 | not-accessible | This is unique index for an entry in the gsmpSwitchConfEntry. |
| I32 gsmpSwitchConfMtype1 | 1.3.6.1.2.1.9912.1.1.1.2 | Integer32 | read-write | In the request, this object contains the requested QoS configuration type. In the response, this object contains the accepted QoS configuration type. 0 : Indicates use of the default GSMP model 1 : Indicates use of IEEE qGSMP model 2-200 : Reserved 201-255 : Experimental |
| I32 gsmpSwitchConfMtype2 | 1.3.6.1.2.1.9912.1.1.1.3 | Integer32 | read-only | If the switch can not support the requested OoS configuration type in gsmpSwitchConfMtype1, it negotiates the QoS model with the manager by offering up to three additional MType |
| I32 gsmpSwitchConfMtype3 | 1.3.6.1.2.1.9912.1.1.1.4 | Integer32 | read-only | If the switch can not support the requested OoS configuration type in gsmpSwitchConfMtype1, it negotiates the QoS model with the manager by offering up to three additional Mtype |
| I32 gsmpSwitchConfMtype4 | 1.3.6.1.2.1.9912.1.1.1.5 | Integer32 | read-only | If the switch can not support the requested OoS configuration type in gsmpSwitchConfMtype1, it negotiates the QoS model with the manager by offering up to three additional Mtype |
| OCT gsmpSwitchConfFirmVer | 1.3.6.1.2.1.9912.1.1.1.6 | OCTET STRING | read-only | The version number of the switch control firmware installed. |
| I32 gsmpSwitchConfWindowSize | 1.3.6.1.2.1.9912.1.1.1.7 | Integer32 | read-write | The maximum number of unacknowledged request messages that may be transmitted by the controller without the possibility of loss. |
| OCT gsmpSwitchConfSwitchType | 1.3.6.1.2.1.9912.1.1.1.8 | OCTET STRING | read-only | A 16-bit value allocated by the manufacturer of the switch. When this value is combined with the OUI from the gsmpSwitchConfSwitchName, the product is uniquely identified. |
| OCT gsmpSwitchConfSwitchName | 1.3.6.1.2.1.9912.1.1.1.9 | OCTET STRING | read-only | This object is a 48-bit quantity. A 48-bit IEEE 802 MAC address, if available, may be used. |
| I32 gsmpSwitchConfMaxReservation | 1.3.6.1.2.1.9912.1.1.1.10 | Integer32 | read-only | The maximum number of reservations that the switch can support. A value of 0 indicates that the switch does not support reservations. |
| gsmpInterfaceConfTable | 1.3.6.1.2.1.9912.1.2 | not-accessible | This table represents the configuration information of a single switch port. | |
| gsmpInterfaceConfEntry | 1.3.6.1.2.1.9912.1.2.1 | not-accessible | An entry in this table represents the configuration information of a single switch port. | |
| NUM gsmpInterfaceConfIndex | 1.3.6.1.2.1.9912.1.2.1.1 | InterfaceIndexOrZero | not-accessible | This is a unique index for an entry in the gsmpInterfaceConfTable. |
| INT gsmpPortType | 1.3.6.1.2.1.9912.1.2.1.2 | INTEGER | read-only | This object represents the port type. |
| INT gsmpPortStatus | 1.3.6.1.2.1.9912.1.2.1.3 | INTEGER | read-write | This object indicates the port status. |
| INT gsmpLineType | 1.3.6.1.2.1.9912.1.2.1.4 | INTEGER | read-only | This object represents the type of physical transmission interface for this port. PortType = Unknown: other(1) PortType = MPLS: ethernetCsmacd(2), ppp(3) PortType = ATM: atm(4) PortType = FR: frameRelayService(5) |
| INT gsmpFunctionType | 1.3.6.1.2.1.9912.1.2.1.5 | INTEGER | read-write | It specifies the action to be taken by the switch. The specified action will be taken regardless of the current status of the port. |
| INT gsmpLineStatus | 1.3.6.1.2.1.9912.1.2.1.6 | INTEGER | read-write | It defines the status of the physical transmission medium connected to the port. The defined values of the Line Status field are: up(1): The line is able to both send and receive. When the line status changes to Up from either the down or test states, a new port session number MUST be generated. down(2): The line is unable either to send or receive or both. Test(3): The port or line is in a test mode, for example, power-on test. |
| I32 gsmpPriorties | 1.3.6.1.2.1.9912.1.2.1.7 | Integer32 | read-write | This object represents the number of different priority levels that this output port can assign to connections. Zero is invalid in this field. |
| I32 gsmpPhysicalSlotNumber | 1.3.6.1.2.1.9912.1.2.1.8 | Integer32 | read-only | The physical location of the slot in which the port is located. |
| I32 gsmpPhysicalPortNumber | 1.3.6.1.2.1.9912.1.2.1.9 | Integer32 | read-only | The physical location of the port within the slot in which the port is located. The Physical Port Number is not used by the GSMP protocol. It is provided to assist network management in functions such as logging, port naming, and graphical representation. |
| LAB gsmpMinLabel | 1.3.6.1.2.1.9912.1.2.1.10 | Label | read-write | The minimum label value in the range. |
| LAB gsmpMaxLabel | 1.3.6.1.2.1.9912.1.2.1.11 | Label | read-write | The maximum label value in the range. |
| U32 gsmpRemainingLabels | 1.3.6.1.2.1.9912.1.2.1.12 | Unsigned32 | read-only | The maximum number of remaining labels that could be requested for allocation on the specified port. |
| T/F gsmpConnectionReplace | 1.3.6.1.2.1.9912.1.2.1.13 | TruthValue | read-write | It indicates that a switch controller requests the switch port to support the mechanism of connection replacement. |
| I32 gsmpDuration | 1.3.6.1.2.1.9912.1.2.1.14 | Integer32 | read-write | It is the length of time in seconds, that any of the loopback states remain in operation. |
| I32 gsmpEventSequenceNumber | 1.3.6.1.2.1.9912.1.2.1.15 | Integer32 | read-only | This object represents the current value of the event sequence number of the switch port. This number is set to zero when the port is initialed. |
| BIT gsmpEventFlags | 1.3.6.1.2.1.9912.1.2.1.16 | Bits | read-write | It is used to reset the event flags. |
| BIT gsmpFlowControlFlags | 1.3.6.1.2.1.9912.1.2.1.17 | Bits | read-write | It is used to indicate whether the flow control mechanism is turned on or not. |
| U32 gsmpTransmitDataRate | 1.3.6.1.2.1.9912.1.2.1.18 | Unsigned32 | read-write | It is used to set the output data rate of the output port. cells/s for PortType = ATM bytes/s for PortType = FR bytes/s for PortType = MPLS |
| U32 gsmpReceiveDataRate | 1.3.6.1.2.1.9912.1.2.1.19 | Unsigned32 | read-write | The maximum rate of data that may arrive at the input port. cells/s for PortType = ATM bytes/s for PortType = FR bytes/s for PortType = MPLS |
| gsmpServiceTable | 1.3.6.1.2.1.9912.1.3 | not-accessible | This table represents the list of services and their associated parameters, which are supported by the switch. | |
| gsmpServiceEntry | 1.3.6.1.2.1.9912.1.3.1 | not-accessible | The entry of this table represents the list of services and their associated parameters, which are supported by the switch. | |
| I32 gsmpServiceId | 1.3.6.1.2.1.9912.1.3.1.1 | Integer32 | not-accessible | This object represents the identifier of the service supported by the switch. |
| I32 gsmpCapSetId | 1.3.6.1.2.1.9912.1.3.1.2 | Integer32 | not-accessible | A capability set contains a set of parameters that describe the QoS parameter values and traffic controls that apply to an instance of the service. |
| BIT gsmpTrafficControls | 1.3.6.1.2.1.9912.1.3.1.3 | Bits | read-only | Identifies the availability of traffic controls within the capability set. U: Usage Parameter Control D: Packet Discard I: Ingress Shaping E: Egress Shaping, Peak Rate S: Egress Traffic Shaping, Sustainable Rate V: VC Merge |
| I32 gsmpCellLossRatio | 1.3.6.1.2.1.9912.1.3.1.4 | Integer32 | read-only | It indicates the cell loss ratio parameter guaranteed by the switch for the specified service. |
| U32 gsmpCellTransferDelay | 1.3.6.1.2.1.9912.1.3.1.5 | Unsigned32 | read-only | The value of this object is expressed in units of microseconds. |
| U32 gsmpCellDelayVariation | 1.3.6.1.2.1.9912.1.3.1.6 | Unsigned32 | read-only | It represents the peak-to-peak cell delay variation. The CDV value is expressed in units of microseconds. |
| U32 gsmpFrequency | 1.3.6.1.2.1.9912.1.3.1.7 | Unsigned32 | read-only | Frequency applies to the MPLS CR-LDP service. Valid values of this object are: 0 - Very frequent 1 - Frequent 2 - Unspecified |
| gsmpPortServiceMapTable | 1.3.6.1.2.1.9912.1.4 | not-accessible | This table represents the service lists, which are supported by the specific port. | |
| gsmpPortServiceMapEntry | 1.3.6.1.2.1.9912.1.4.1 | not-accessible | The entry of this table represents the service lists, which are supported by the specific port. | |
| I32 gsmpMapServiceId | 1.3.6.1.2.1.9912.1.4.1.1 | Integer32 | read-only | This object represents the identifier of the service supported by the switch. |
| I32 gsmpMapCapSetId | 1.3.6.1.2.1.9912.1.4.1.2 | Integer32 | read-only | A capability set contains a set of parameters that describe the QoS parameter values and traffic controls that apply to an instance of the Service. |
| U32 gsmpTrafficParamIndexNext | 1.3.6.1.2.1.9912.1.5 | Unsigned32 | read-only | This object contains an appropriate value which will be used for gsmpTrafficParamIndex. |
| gsmpTrafficParamTable | 1.3.6.1.2.1.9912.1.6 | not-accessible | This table contains objects, which specify the traffic parameters of in-segments and out-segments. | |
| gsmpTrafficParamEntry | 1.3.6.1.2.1.9912.1.6.1 | not-accessible | An entry in this table represents the gsmpTrafficParam objects for one or more in or out segments. | |
| U32 gsmpTrafficParamIndex | 1.3.6.1.2.1.9912.1.6.1.1 | Unsigned32 | not-accessible | Uniquely identifies this row of this table. Note that zero represents an invalid index. |
| I32 gsmpTrafficParamMaxRate | 1.3.6.1.2.1.9912.1.6.1.2 | Integer32 | read-create | Maximum rate in kilobits/second. |
| I32 gsmpTrafficParamMeanRate | 1.3.6.1.2.1.9912.1.6.1.3 | Integer32 | read-create | Mean rate in kilobits/second. |
| U32 gsmpTrafficParamMaxBurstSize | 1.3.6.1.2.1.9912.1.6.1.4 | Unsigned32 | read-create | Maximum burst size in bytes. |
| BIT gsmpTrafficControlsFlags | 1.3.6.1.2.1.9912.1.6.1.5 | Bits | read-create | This object is used to indicate that specific traffic controls are requested for the requested connection. 0 1 2 3 4 5 6 7 +-+-+-+-+-+-+-+-+ |U|D|I|E|S|V|P|x| +-+-+-+-+-+-+-+-+ U: Usage Parameter Control D: Packet Discard I: Ingress Shaping E: Egress Shaping, Peak Rate S: Egress Traffic Shaping, Sustainable Rate V: VC Merge P: Port x: Reserved |
| ROW gsmpTrafficParamRowStatus | 1.3.6.1.2.1.9912.1.6.1.6 | RowStatus | read-create | For creating, modifying, and deleting this row. |
| STO gsmpTrafficParamStorageType | 1.3.6.1.2.1.9912.1.6.1.7 | StorageType | read-create | Defines the storage type support provided for this object by the agent. |
| gsmpInSegmentTable | 1.3.6.1.2.1.9912.1.7 | not-accessible | This table contains a description of the incoming GSMP segments and their associated parameters. | |
| gsmpInSegmentEntry | 1.3.6.1.2.1.9912.1.7.1 | not-accessible | An entry in this table represents one incoming GSMP segment. | |
| NUM gsmpInSegmentIfIndex | 1.3.6.1.2.1.9912.1.7.1.1 | InterfaceIndexOrZero | not-accessible | This is a unique index for an entry in the gsmpInSegmentTable. This value represents the interface index for the incoming GSMP interface. A value of zero represents an incoming label from the per-platform label space. |
| LAB gsmpInSegmentLabel | 1.3.6.1.2.1.9912.1.7.1.2 | Label | not-accessible | The incoming label for this segment. |
| U32 gsmpInSegmentXCIndex | 1.3.6.1.2.1.9912.1.7.1.3 | Unsigned32 | read-only | Index into gsmpXCTable which identifies which cross-connect entry this segment is part of. A value of zero indicates that this entry is not referred to by any cross-connect entry. When a cross-connect entry is created which this in-segment is a part of, this object is automatically updated to reflect the value of gsmpXCIndex of that cross-connect entry. |
| OWN gsmpInSegmentOwner | 1.3.6.1.2.1.9912.1.7.1.4 | Owner | read-only | This object denotes the entity that created and is responsible for managing this segment. |
| NUM gsmpInSegmentTrafficParamPtr | 1.3.6.1.2.1.9912.1.7.1.5 | RowPointer | read-create | This variable represents a pointer to the traffic parameter specification for this in-segment. This value may point at an entry in the gsmpTrafficParamTable to indicate which gsmpTrafficParamEntry is to be assigned to this segment. This value may optionally point at an externally defined traffic parameter specification table. |
| INT gsmpInQoSModelSelector | 1.3.6.1.2.1.9912.1.7.1.6 | INTEGER | read-create | simplePriorityModel(1): The input service selector indicates a simple priority. serviceProfileModel(2): The input service selector is an opaque service profile identifier. Service profiles can be used to indicate pre- defined differentiated service per hop behaviors. serviceModel(3): The input service selector corresponds to a service specification. When the value of this object is serviceModel(3), then a traffic parameters block is appended to this entry. armModel(4): The input service selector corresponds to an ARM service specification. ARM model is defined in qGSMP specification. |
| I32 gsmpInServiceSelector | 1.3.6.1.2.1.9912.1.7.1.7 | Integer32 | read-create | This object identifies details of the service specification being used for connection. The interpretation depends upon the gsmpInQoSModelSelector object. |
| INT gsmpInAdaptationMethodType | 1.3.6.1.2.1.9912.1.7.1.8 | INTEGER | read-create | The adaptation method is used to define the adaptation framing that may be in use when moving traffic from one port type to another port type; e.g., from a frame relay port to an ATM port. |
| ROW gsmpInSegmentRowStatus | 1.3.6.1.2.1.9912.1.7.1.9 | RowStatus | read-create | This variable is used to create, modify, and/or delete a row in this table. |
| STO gsmpInSegmentStorageType | 1.3.6.1.2.1.9912.1.7.1.10 | StorageType | read-create | This variable indicates the storage type for this object. |
| gsmpOutSegmentTable | 1.3.6.1.2.1.9912.1.8 | not-accessible | This table contains a description of the outgoing GSMP segments to a connection and their associated parameters. | |
| gsmpOutSegmentEntry | 1.3.6.1.2.1.9912.1.8.1 | not-accessible | An entry in this table represents one outgoing GSMP segment. | |
| NUM gsmpOutSegmentIfIndex | 1.3.6.1.2.1.9912.1.8.1.1 | InterfaceIndex | read-create | This is a unique index for an entry in the gsnmpOutSegmentTable. This value represents the interface index for the outgoing GSMP interface. A value of zero represents an outgoing label from the per-platform label space. |
| LAB gsmpOutSegmentLabel | 1.3.6.1.2.1.9912.1.8.1.2 | Label | read-create | The outgoing label for this segment. |
| U32 gsmpOutSegmentXCIndex | 1.3.6.1.2.1.9912.1.8.1.3 | Unsigned32 | read-only | Index into gsmpXCTable which identifies which cross-connect entry this segment is part of. A value of zero indicates that this entry is not referred to by any cross-connect entry. When a cross-connect entry is created which this out-segment is a part of, this object is automatically updated to reflect the value of gsmpXCIndex of that cross-connect entry. |
| OWN gsmpOutSegmentOwner | 1.3.6.1.2.1.9912.1.8.1.4 | Owner | read-only | This object denotes the entity that created and is responsible for managing this segment. |
| NUM gsmpOutSegmentTrafficParamPtr | 1.3.6.1.2.1.9912.1.8.1.5 | RowPointer | read-create | This variable represents a pointer to the traffic parameter specification for this out-segment. This value may point at an entry in the gsmpTrafficParamTable to indicate which gsmpTrafficParamEntry is to be assigned to this segment. This value may optionally point at an externally defined traffic parameter specification table. |
| INT gsmpOutQoSModelSelector | 1.3.6.1.2.1.9912.1.8.1.6 | INTEGER | read-create | simplePriorityModel(1): The output service selector indicates a simple priority. serviceProfileModel(2): The output service selector is an opaque service profile identifier. Service profiles can be used to indicate pre- defined differentiated service per hop behaviors. serviceModel(3): The output service selector corresponds to a service specification. When the value of this object is serviceModel(3), then a traffic parameters block is appended to this entry. armModel(4): The output service selector corresponds to an ARM service specification. ARM model is defined in qGSMP specification. |
| INT gsmpOutAdaptationMethodType | 1.3.6.1.2.1.9912.1.8.1.8 | INTEGER | read-create | The adaptation method is used to define the adaptation framing that may be in use when moving traffic from one port type to another port type; e.g., from a frame relay port to an ATM port. |
| ROW gsmpOutSegmentRowStatus | 1.3.6.1.2.1.9912.1.8.1.9 | RowStatus | read-create | This variable is used to create, modify, and/or delete a row in this table. |
| STO gsmpOutSegmentStorageType | 1.3.6.1.2.1.9912.1.8.1.10 | StorageType | read-create | This variable indicates the storage type for this object. |
| U32 gsmpXCIndexNext | 1.3.6.1.2.1.9912.1.9 | Unsigned32 | read-only | This object contains an appropriate value to be used for gsmpXCIndex when creating entries in the gsmpXCTable. |
| gsmpXCTable | 1.3.6.1.2.1.9912.1.10 | not-accessible | A connection is modeled as a cross-connect consisting of one or more incoming segments(in-segments) and/or one or more outgoing segments(out-segments) at a switch. The association or interconnection of the in-segments and out-segments is accomplished by using the gsmpXCTable. | |
| gsmpXCEntry | 1.3.6.1.2.1.9912.1.10.1 | not-accessible | A row in this table represents one cross-connect entry. | |
| U32 gsmpXCIndex | 1.3.6.1.2.1.9912.1.10.1.1 | Unsigned32 | not-accessible | Primary index for the conceptual row identifying cross-connect segments. |
| NUM gsmpXCInSegmentIfIndex | 1.3.6.1.2.1.9912.1.10.1.2 | InterfaceIndexOrZero | not-accessible | Interface index of the in-segment. |
| LAB gsmpXCInSegmentLabel | 1.3.6.1.2.1.9912.1.10.1.3 | Label | not-accessible | Incoming label. |
| NUM gsmpXCOutSegmentIfIndex | 1.3.6.1.2.1.9912.1.10.1.4 | InterfaceIndexOrZero | not-accessible | Interface index of the out-segment. |
| LAB gsmpXCOutSegmentLabel | 1.3.6.1.2.1.9912.1.10.1.5 | Label | not-accessible | Outgoing label. |
| T/F gsmpXCIsPersistent | 1.3.6.1.2.1.9912.1.10.1.6 | TruthValue | read-create | This object denotes whether or not this cross-connect entry and associated in- and out-segments should be restored automatically after failures. This value MUST be set to false in cases where this cross-connect entry was created by a signaling protocol. |
| OWN gsmpXCOwner | 1.3.6.1.2.1.9912.1.10.1.7 | Owner | read-only | It denotes the entity that created and is responsible for managing this cross-connect. |
| INT gsmpXCAdminStatus | 1.3.6.1.2.1.9912.1.10.1.8 | INTEGER | read-create | The desired operational status of this segment. up(1) = ready to pass packets testing(3) = in some test mode |
| INT gsmpXCOperStatus | 1.3.6.1.2.1.9912.1.10.1.9 | INTEGER | read-only | The actual operational status of this cross-connect. up(1) = ready to pass packets testing(3) = in some test mode unknown(4) = status cannot be determined for some reason notPresent(6) = some component is missing lowerLayerDown(7) = down due to the state of lower layer interfaces |
| INT gsmpConnectType | 1.3.6.1.2.1.9912.1.10.1.10 | INTEGER | read-create | This object is used to define connection types. |
| T/F gsmpBiDirection | 1.3.6.1.2.1.9912.1.10.1.11 | TruthValue | read-create | If this flag is true, then the connection should be established to be bi-direction. |
| ROW gsmpXCRowStatus | 1.3.6.1.2.1.9912.1.10.1.12 | RowStatus | read-create | This variable is used to create, modify, and/or delete a row in this table. |
| STO gsmpXCStorageType | 1.3.6.1.2.1.9912.1.10.1.13 | StorageType | read-only | This variable indicates the storage type for this object. |
| gsmpInterfacePerfTable | 1.3.6.1.2.1.9912.1.11 | not-accessible | This table contains objects to measure the performance of GSMP interfaces and is an AUGMENT to gsmpInterfaceConfTable. | |
| gsmpInterfacePerfEntry | 1.3.6.1.2.1.9912.1.11.1 | not-accessible | The Entry of this table contains objects to measure the performance of GSMP interfaces and is an AUGMENT to gsmpInterfaceConfTable. | |
| C64 gsmpInterfaceInFrameCount | 1.3.6.1.2.1.9912.1.11.1.1 | Counter64 | read-only | This object counts frames arriving at the input. It is relevant for label types = FR and MPLS. |
| C64 gsmpInterfaceInInvalidLabelCount | 1.3.6.1.2.1.9912.1.11.1.2 | Counter64 | read-only | This object counts frames discarded because their Label is invalid on arrival at an input port. |
| C64 gsmpInterfaceInFrameDiscardCount | 1.3.6.1.2.1.9912.1.11.1.3 | Counter64 | read-only | This object counts frames discarded due to congestion on an input port. It is relevant for label types = FR and MPLS. |
| C64 gsmpInterfaceOutFrameCount | 1.3.6.1.2.1.9912.1.11.1.4 | Counter64 | read-only | This object counts frames arriving at the output. It is relevant for label types = FR and MPLS. |
| C64 gsmpInterfaceOutFrameDiscardCount | 1.3.6.1.2.1.9912.1.11.1.5 | Counter64 | read-only | This object counts frames discarded due to congestion on an output port. It is relevant for label types = FR and MPLS. |
| gsmpLabelPerfTable | 1.3.6.1.2.1.9912.1.12 | not-accessible | This table has objects to measure the performance of connection. | |
| gsmpLabelPerfEntry | 1.3.6.1.2.1.9912.1.12.1 | not-accessible | The Entry of this table contains objects to measure the performance of GSMP label. | |
| LAB gsmpLabelIndex | 1.3.6.1.2.1.9912.1.12.1.1 | Label | not-accessible | This is a unique index for an entry in the gsmpLabelPerfTable. |
| C64 gsmpLabelInFrameCount | 1.3.6.1.2.1.9912.1.12.1.2 | Counter64 | read-only | This object counts frames arriving at the in-segment. It is relevant for label types = FR and MPLS. |
| C64 gsmpLabelInFrameDiscardCount | 1.3.6.1.2.1.9912.1.12.1.3 | Counter64 | read-only | This object counts frames discarded due to congestion on the in-segment. It is relevant for label types = FR and MPLS. |
| C64 gsmpLabelOutFrameCount | 1.3.6.1.2.1.9912.1.12.1.4 | Counter64 | read-only | This object counts frames departing from the out-segment. It is relevant for label types = FR and MPLS. |
| C64 gsmpLabelOutFrameDiscardCount | 1.3.6.1.2.1.9912.1.12.1.5 | Counter64 | read-only | This object counts frames discarded due to congestion on the out-segment. It is relevant for label types = FR and MPLS. |
RFC description
Managed object definitions for network management services in General Switch Management Protocol (GSMP) interfaces.
Start monitoring ATM and label switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.