APRISAXE-MIB-4RF

All MIBs › APRISAXE-MIB-4RF

Organization: www.4rf.com

Last Updated: 2007-04-30

Category: 4RF Aprisa Radio Backhaul

Description: Covers configuration settings and operational status for 4RF Aprisa XE narrowband IP radio modem systems.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is APRISAXE-MIB-4RF?

APRISAXE-MIB-4RF is the main MIB for 4RF's Aprisa XE narrowband IP radio/modem terminals, defining configuration and operational status of the radio terminal itself. It exposes RF parameters (channel width, RSSI, modulation state), clock source/reference, bandwidth allocation and loopback settings, alarm status (overall, receive, transmit), and hardware identity such as motherboard serial number. Its monitoring value spans link-quality performance (RSSI, modulation state) and hardware/software status (alarm fields, serial number, provisioned bandwidth), letting operators judge both link health and terminal condition. It relies on textual conventions from APRISAXE-TC-4RF and pairs with APRISAXE-EVENTS-4RF for trap notifications. It is deployed on fixed point-to-point or point-to-multipoint wireless links for SCADA/telemetry backhaul in utility and industrial networks, often at remote unattended sites. Engineers can download the APRISAXE-MIB-4RF file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in APRISAXE-MIB-4RF. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

4RF Aprisa XE narrowband IP radio/modem terminal

Monitoring Examples

aprisaXETerminalRSSI and aprisaXETerminalModulationState let an operator gauge current radio link quality and detect a fade event or modulation fallback under poor conditions. aprisaXETerminalAlarmStatus, aprisaXETerminalRxAlarmStatus, and aprisaXETerminalTxAlarmStatus reveal whether the receive or transmit path specifically is in an alarm condition, while aprisaXEMotherboardSerialNumber supports hardware inventory and aprisaXETerminalAllocatedBandwidth versus aprisaXETerminalLoopbackBandwidth confirms the terminal is running at provisioned capacity rather than in test loopback mode.

What Can Be Monitored

RSSI (signal strength)
modulation state
Rx/Tx alarm status
clock source/reference
allocated bandwidth
motherboard serial number

Imported Objects

From APRISAXE-TC-4RF

AprisaXE2WireSignalState
AprisaXE4WInputLevel
AprisaXE4WOutputLevel
AprisaXE4WRxGain
AprisaXE4WTxGain
AprisaXEAdcVoltage
AprisaXEAdpcmCompression
AprisaXEAlarmMapping
AprisaXEAlarmOutput
AprisaXEAlarmPolarity
AprisaXEAlarmSource
AprisaXEAlarmType
AprisaXECCActivationStatus
AprisaXECardType
AprisaXEChannelControlType
AprisaXEConnectionID
AprisaXEDataStatus
AprisaXEDbValue
AprisaXEDefaultAction
AprisaXEEthernetFrameRate
AprisaXEEthernetGroup
AprisaXEEthernetGrouping
AprisaXEEthernetPortNumber
AprisaXEEthernetPortPriority
AprisaXEEthernetPrioQueueMapping
AprisaXEEthernetPrioQueueScheduling
AprisaXEFXOCountry
AprisaXEFXOInputLevel
AprisaXEFXOOutputLevel
AprisaXEFXSInputLevel
AprisaXEFXSOutputLevel
AprisaXEFXSPMLevel
AprisaXEFXSPathMute
AprisaXEHardwareVersion
AprisaXEHssSerialMode
AprisaXEIQData
AprisaXEInterfaceCnxnType
AprisaXEPSCActiveRadio
AprisaXEPSCActiveTx
AprisaXEPcmLaw
AprisaXEPcmMode
AprisaXEPortNumber
AprisaXEQuadJetConnectionType
AprisaXEQuadJetLineEncoding
AprisaXEQuadJetLoopbacks
AprisaXEQuadJetMultiframeEnable
AprisaXEQuadJetTrafficType
AprisaXEQuadJetWaveFormShapers
AprisaXESerialEquipmentMode
AprisaXESignalState
AprisaXESlotNumber
AprisaXETdmBus
AprisaXETdmPortType

From COMMON-TC-4RF

FourRFAlarmEnabled
FourRFAlarmPresent
FourRFAlarmSeverity
FourRFAlarmStatus
FourRFChannelWidth
FourRFClockSource
FourRFErrorCounter
FourRFFanStatus
FourRFFrequency
FourRFHardwareVersion
FourRFImageVersion
FourRFLoopback
FourRFMHSBCommand
FourRFMHSBStatus
FourRFModulationType
FourRFNetworkClockSelect
FourRFNetworkClockStatus
FourRFProcessResultType
FourRFRSSI
FourRFRfBand
FourRFSNR
FourRFSerialNumber
FourRFTemperature
FourRFTxPower

From MIB-4RF

fourRFModules

OBJECT-IDENTITY

From PRODUCTS-MIB-4RF

fourRFAprisaXE

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
TEXTUAL-CONVENTION

How to Use in IPNetwork Monitor

Example using aprisaXETxPacketCount OID:

Select an 4RF Aprisa XE point-to-point microwave/radio terminal as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type aprisaXETxPacketCount into the Find box to locate it in the OID tree, then select it and click OK. The terminal transmitted ethernet packet count (to link). On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
APR aprisaXE4WireAdpcmCompression	1.3.6.1.4.1.14817.7.3.1.2.110.1.5	AprisaXEAdpcmCompression	read-write	ADPCM compression 16, 24, 32, 64 kbps or none.
APR aprisaXE4WireConnectionID	1.3.6.1.4.1.14817.7.3.1.2.110.1.1	AprisaXEConnectionID	read-write	Associated cross-connect Backplane Connection ID.
APR aprisaXE4WireEInvert	1.3.6.1.4.1.14817.7.3.1.2.110.1.8	AprisaXESignalState	read-write	Controls E on each channel for NORMAL or INVERT polarity.
APR aprisaXE4WireInputLevel	1.3.6.1.4.1.14817.7.3.1.2.110.1.12	AprisaXE4WInputLevel	read-write	Input Level -14.0 dBr to +4.0 dBr in half dB steps.
FOU aprisaXE4WireLoopback	1.3.6.1.4.1.14817.7.3.1.2.110.1.4	FourRFLoopback	read-write	Loopback control on or off for channels.
APR aprisaXE4WireMInvert	1.3.6.1.4.1.14817.7.3.1.2.110.1.9	AprisaXESignalState	read-write	Controls M on each channel for NORMAL or INVERT polarity.
APR aprisaXE4WireOutputLevel	1.3.6.1.4.1.14817.7.3.1.2.110.1.13	AprisaXE4WOutputLevel	read-write	Output Level -14.0 dBr to +4.0 dBr in 0.5 dB steps.
APR aprisaXE4WirePcmLaw	1.3.6.1.4.1.14817.7.3.1.2.121.1.2	AprisaXEPcmLaw	read-write	Sets A-law or u-law.
aprisaXE4WirePortControlTable	1.3.6.1.4.1.14817.7.3.1.2.110		not-accessible	Status and Control table for 4Wire.
aprisaXE4WirePortControlTableEntry	1.3.6.1.4.1.14817.7.3.1.2.110.1		not-accessible	Entries for 4wire table.
APR aprisaXE4WirePortIndex	1.3.6.1.4.1.14817.7.3.1.2.110.1.3	AprisaXEPortNumber	read-only	Channel index for 4 Wire Control Status table.
APR aprisaXE4WireRxGain	1.3.6.1.4.1.14817.7.3.1.2.110.1.6	AprisaXE4WRxGain	read-write	Rx gain +4 dB to -14 dB in 0.5 dB steps.
INT aprisaXE4WireSignalling	1.3.6.1.4.1.14817.7.3.1.2.110.1.10	INTEGER	read-write	Enables or disables E&M signalling for the port.
APR aprisaXE4WireSignallingConnectionID	1.3.6.1.4.1.14817.7.3.1.2.110.1.11	AprisaXEConnectionID	read-write	Associated signalling cross-connect Backplane Connection ID.
APR aprisaXE4WireSlotIndex	1.3.6.1.4.1.14817.7.3.1.2.110.1.2	AprisaXESlotNumber	read-only	Slot index for 4wire Status Control table.
APR aprisaXE4WireStatusControlSlotIndex	1.3.6.1.4.1.14817.7.3.1.2.121.1.1	AprisaXESlotNumber	read-only	Index for table.
aprisaXE4WireStatusControlTable	1.3.6.1.4.1.14817.7.3.1.2.121		not-accessible	Overall card control and status.
aprisaXE4WireStatusControlTableEntry	1.3.6.1.4.1.14817.7.3.1.2.121.1		not-accessible	Status control entries.
APR aprisaXE4WireTxGain	1.3.6.1.4.1.14817.7.3.1.2.110.1.7	AprisaXE4WTxGain	read-write	Tx gain +14 dB to -4 dB in half dB steps.
I32 aprisaXEAggregateBackplaneID	1.3.6.1.4.1.14817.7.3.1.2.160.1.1	Integer32	read-only	Backplane Connection identifier.
aprisaXEAggregateConnectionTable	1.3.6.1.4.1.14817.7.3.1.2.160		not-accessible	Table of Aggregated backplane connections used for interfaces with further cross-connection capability.
aprisaXEAggregateConnectionTableEntry	1.3.6.1.4.1.14817.7.3.1.2.160.1		not-accessible
aprisaXEAggregateControl	1.3.6.1.4.1.14817.7.3.1.2.170
INT aprisaXEAggregateControlBackplaneID	1.3.6.1.4.1.14817.7.3.1.2.170.1	INTEGER	read-write	The backplane ID to add or delete.
INT aprisaXEAggregateControlCommand	1.3.6.1.4.1.14817.7.3.1.2.170.6	INTEGER	read-write	Command to send to act upon the rows in the Aggregate Connection table.
INT aprisaXEAggregateControlInterfaceID	1.3.6.1.4.1.14817.7.3.1.2.170.2	INTEGER	read-write	Aggregate connection identifier.
INT aprisaXEAggregateControlLength	1.3.6.1.4.1.14817.7.3.1.2.170.4	INTEGER	read-write	Number of bits required for this interface connection.
INT aprisaXEAggregateControlOffset	1.3.6.1.4.1.14817.7.3.1.2.170.5	INTEGER	read-write	Offset into the aggregate connection where this interface connection is placed.
INT aprisaXEAggregateControlStartBitPos	1.3.6.1.4.1.14817.7.3.1.2.170.3	INTEGER	read-write	Start bit position of the data coming into the cross-connection device (SWITI) for this interface connection.
APR aprisaXEAggregateE1Port	1.3.6.1.4.1.14817.7.3.1.2.160.1.6	AprisaXEPortNumber	read-only	Port number associated with this connection.
I32 aprisaXEAggregateInterfaceID	1.3.6.1.4.1.14817.7.3.1.2.160.1.2	Integer32	read-only
INT aprisaXEAggregateLength	1.3.6.1.4.1.14817.7.3.1.2.160.1.4	INTEGER	read-only	Number of bits required for this interface connection.
INT aprisaXEAggregateOffset	1.3.6.1.4.1.14817.7.3.1.2.160.1.5	INTEGER	read-only	Offset into the aggregate connection where this interface connection is placed.
INT aprisaXEAggregateStartBitPos	1.3.6.1.4.1.14817.7.3.1.2.160.1.3	INTEGER	read-only	Start bit position of the data coming into the cross-connection device (SWITI) for this interface connection.
aprisaXEAlarmControl	1.3.6.1.4.1.14817.7.3.1.2.32
aprisaXEAlarmControlGroup	1.3.6.1.4.1.14817.7.3.1.1.32			The AprisaXE alarm control group.
aprisaXEAlarmEntry	1.3.6.1.4.1.14817.7.3.1.2.26.1		not-accessible	The table entry index specification, just the alarm index.
INT aprisaXEAlarmHistoryCommand	1.3.6.1.4.1.14817.7.3.1.2.32.1	INTEGER	read-write	Allows the alarm history table to be cleared.
aprisaXEAlarmHistoryEntry	1.3.6.1.4.1.14817.7.3.1.2.31.1		not-accessible	The table entry index specification, just the alarm index.
INT aprisaXEAlarmHistoryIndex	1.3.6.1.4.1.14817.7.3.1.2.31.1.1	INTEGER	read-only	The index into the alarm history table.
APR aprisaXEAlarmHistoryPort	1.3.6.1.4.1.14817.7.3.1.2.31.1.4	AprisaXEPortNumber	read-only	The source port of the alarm.
FOU aprisaXEAlarmHistoryPresent	1.3.6.1.4.1.14817.7.3.1.2.31.1.7	FourRFAlarmPresent	read-only	Indicates whether the alarm is present or not.
FOU aprisaXEAlarmHistorySeverity	1.3.6.1.4.1.14817.7.3.1.2.31.1.5	FourRFAlarmSeverity	read-only	The severity of the alarm.
APR aprisaXEAlarmHistorySlot	1.3.6.1.4.1.14817.7.3.1.2.31.1.2	AprisaXESlotNumber	read-only	The number of the slot generating the alarm.
APR aprisaXEAlarmHistorySource	1.3.6.1.4.1.14817.7.3.1.2.31.1.3	AprisaXEAlarmSource	read-only	The source of the alarm, a card type or external.
aprisaXEAlarmHistoryTable	1.3.6.1.4.1.14817.7.3.1.2.31		not-accessible	This table stores a history of the alarms as they become active and cleared.
STR aprisaXEAlarmHistoryTime	1.3.6.1.4.1.14817.7.3.1.2.31.1.8	DisplayString	read-only	The time that the alarm state change occurred.
APR aprisaXEAlarmHistoryType	1.3.6.1.4.1.14817.7.3.1.2.31.1.6	AprisaXEAlarmType	read-only	The type of the alarm.
INT aprisaXEAlarmIndex	1.3.6.1.4.1.14817.7.3.1.2.26.1.1	INTEGER	read-only	The index into the alarm table.
APR aprisaXEAlarmPort	1.3.6.1.4.1.14817.7.3.1.2.26.1.4	AprisaXEPortNumber	read-only	The source port of the alarm.
FOU aprisaXEAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.26.1.5	FourRFAlarmSeverity	read-only	The severity of the alarm.
APR aprisaXEAlarmSlot	1.3.6.1.4.1.14817.7.3.1.2.26.1.2	AprisaXESlotNumber	read-only	The number of the slot generating the alarm.
APR aprisaXEAlarmSource	1.3.6.1.4.1.14817.7.3.1.2.26.1.3	AprisaXEAlarmSource	read-only	The source of the alarm, a card type or external.
aprisaXEAlarmTable	1.3.6.1.4.1.14817.7.3.1.2.26		not-accessible	This table stores the currently active alarms. Up to 500 separate alarms will be stored in the table.
STR aprisaXEAlarmTime	1.3.6.1.4.1.14817.7.3.1.2.26.1.7	DisplayString	read-only	The time that the alarm occurred.
APR aprisaXEAlarmType	1.3.6.1.4.1.14817.7.3.1.2.26.1.6	AprisaXEAlarmType	read-only	The type of the alarm.
APR aprisaXEBackplaneConnectionID	1.3.6.1.4.1.14817.7.3.1.2.150.1.1	AprisaXEConnectionID	read-write	Handle to associate circuits with backplane connections.
aprisaXEBackplaneConnectionTable	1.3.6.1.4.1.14817.7.3.1.2.150		not-accessible	Table of AprisaXE Cross connections.
aprisaXEBackplaneConnectionTableEntry	1.3.6.1.4.1.14817.7.3.1.2.150.1		not-accessible	Table entries define a circuit carried ove a TDM bus.
aprisaXEBackplaneControl	1.3.6.1.4.1.14817.7.3.1.2.180
INT aprisaXEBackplaneControlCommand	1.3.6.1.4.1.14817.7.3.1.2.180.6	INTEGER	read-write	Command to send to act upon rows in the Backplane Connection table.
APR aprisaXEBackplaneControlConnectionID	1.3.6.1.4.1.14817.7.3.1.2.180.1	AprisaXEConnectionID	read-write	The Backplane Connection ID to add or delete.
NUM aprisaXEBackplaneControlInterface	1.3.6.1.4.1.14817.7.3.1.2.180.5	AprisaXEInterfaceCnxnType	read-write	The type of circuit this backplane connection is carrying.
INT aprisaXEBackplaneControlLength	1.3.6.1.4.1.14817.7.3.1.2.180.4	INTEGER	read-write	Number of bits to place on the backplane TDM bus (0 - 2048).
INT aprisaXEBackplaneControlStartBitPos	1.3.6.1.4.1.14817.7.3.1.2.180.3	INTEGER	read-write	Start bit position on the associated TDM bus (0 - 2047).
APR aprisaXEBackplaneControlTdmBus	1.3.6.1.4.1.14817.7.3.1.2.180.2	AprisaXETdmBus	read-write	TDM Bus to switch: busA - busD.
NUM aprisaXEBackplaneInterface	1.3.6.1.4.1.14817.7.3.1.2.150.1.5	AprisaXEInterfaceCnxnType	read-write	The type of circuit this backplane connection is carrying.
INT aprisaXEBackplaneLength	1.3.6.1.4.1.14817.7.3.1.2.150.1.4	INTEGER	read-write	Number of bits to place on the backplane TDM bus (0 - 2047).
INT aprisaXEBackplaneStartBitPos	1.3.6.1.4.1.14817.7.3.1.2.150.1.3	INTEGER	read-write	Start bit position on the associated TDM bus (0 - 2047).
APR aprisaXEBackplaneTdmBus	1.3.6.1.4.1.14817.7.3.1.2.150.1.2	AprisaXETdmBus	read-write	TDM Bus to switch: busA - busD.
STR aprisaXEBERExponent	1.3.6.1.4.1.14817.7.3.1.2.6.10	DisplayString	read-only	The exponent of the Bit Error Rate for the terminal.
aprisaXEBoardEntry	1.3.6.1.4.1.14817.7.3.1.2.66.1		not-accessible	Slot Information.
APR aprisaXEBoardFirmwareVersion	1.3.6.1.4.1.14817.7.3.1.2.66.1.5	AprisaXEHardwareVersion	read-only	Field indicating the firmware version for the board in the slot.
APR aprisaXEBoardHardwareVersion	1.3.6.1.4.1.14817.7.3.1.2.66.1.4	AprisaXEHardwareVersion	read-only	Field indicating the hardware version for the board in the slot.
APR aprisaXEBoardHSCNumber	1.3.6.1.4.1.14817.7.3.1.2.66.1.6	AprisaXEHardwareVersion	read-only	Field indicating the hardware software configuration number for the board in the slot.
FOU aprisaXEBoardSerialNumber	1.3.6.1.4.1.14817.7.3.1.2.66.1.7	FourRFSerialNumber	read-only	Field indicating the module serial number for the card in the slot.
APR aprisaXEBoardSlot	1.3.6.1.4.1.14817.7.3.1.2.66.1.1	AprisaXESlotNumber	read-only	The slot number in which the board resides, the physical slots are numbered from zero to ten and mapped to one to eleven in the MIB. The motherboard is therefore in physical slot 0 but MIB slot 1.
aprisaXEBoardTable	1.3.6.1.4.1.14817.7.3.1.2.66		not-accessible	This table stores the basic information for the plugin slots.
APR aprisaXEBoardType	1.3.6.1.4.1.14817.7.3.1.2.66.1.2	AprisaXECardType	read-only	The type of the board in the slot. The types are as follows: - none : there is no card in the slot - modem : this card will be fitted in physical slot 0 - transmitter : the transmitter card, this will be in physical slot 9 - receiver : the receiver card, this will be in physical slot 10 - quadJET : e1/t1 4 port card
APR aprisaXECCActivationStatus	1.3.6.1.4.1.14817.7.3.1.2.202.1.2	AprisaXECCActivationStatus	read-only	Cross-connect activation status i.e activated, failed or currently busy activating.
APR aprisaXECCActivationStatusSlotIndex	1.3.6.1.4.1.14817.7.3.1.2.202.1.1	AprisaXESlotNumber	read-only	Slot index for CC Activation Status table.
aprisaXECCActivationStatusTable	1.3.6.1.4.1.14817.7.3.1.2.202		not-accessible	CC Activation status table.
aprisaXECCActivationStatusTableEntry	1.3.6.1.4.1.14817.7.3.1.2.202.1		not-accessible	Entries for CC Activation status table.
aprisaXEConfig	1.3.6.1.4.1.14817.7.3.1			The root of the OID sub-tree for the AprisaXE product configuration.
NUM aprisaXECorrectableErrorCount	1.3.6.1.4.1.14817.7.3.1.2.6.1	FourRFErrorCounter	read-only	The terminal correctable error count.
aprisaXECrossConnectControl	1.3.6.1.4.1.14817.7.3.1.2.200
INT aprisaXECrossConnectControlCommand	1.3.6.1.4.1.14817.7.3.1.2.200.1	INTEGER	read-write	Command to send to delete all current cross-connections or to activate a new set of cross-connections.
APR aprisaXEDefaultEthernetGrouping	1.3.6.1.4.1.14817.7.3.1.2.98.5	AprisaXEDefaultAction	read-write	Indicates when Ethernet Grouping settings must be reset to default values.
APR aprisaXEDefaultEthernetQos	1.3.6.1.4.1.14817.7.3.1.2.98.6	AprisaXEDefaultAction	read-write	Indicates when Ethernet Grouping settings must be reset to default values.
FOU aprisaXEDualJetAISAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.221.1.5	FourRFAlarmEnabled	read-only	AIS alarm enabled or disabled.
FOU aprisaXEDualJetAISAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.221.1.4	FourRFAlarmSeverity	read-only	AIS alarm severity.
FOU aprisaXEDualJetAISAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.221.1.3	FourRFAlarmStatus	read-only	AIS alarm status.
aprisaXEDualJetBoardEntry	1.3.6.1.4.1.14817.7.3.1.2.220.1		not-accessible	Dual E1 configuration details.
aprisaXEDualJetBoardTable	1.3.6.1.4.1.14817.7.3.1.2.220		not-accessible	Table of Dual E1 card specific configuration details.
APR aprisaXEDualJetBoardTableIndex	1.3.6.1.4.1.14817.7.3.1.2.220.1.1	AprisaXESlotNumber	read-only	Dual E1 board indexed by slot.
FOU aprisaXEDualJetClockSource	1.3.6.1.4.1.14817.7.3.1.2.222.1.7	FourRFNetworkClockSelect	read-write	Controls whether the port drives the clock soure or not.
aprisaXEDualJetIFConfigEntry	1.3.6.1.4.1.14817.7.3.1.2.222.1		not-accessible	Dual JET config data.
APR aprisaXEDualJetIFConfigPortIndex	1.3.6.1.4.1.14817.7.3.1.2.222.1.2	AprisaXEPortNumber	read-only	Index to the port table based on port number.
APR aprisaXEDualJetIFConfigSlotIndex	1.3.6.1.4.1.14817.7.3.1.2.222.1.1	AprisaXESlotNumber	read-only	Index to the port table based on port number.
aprisaXEDualJetIFConfigTable	1.3.6.1.4.1.14817.7.3.1.2.222		not-accessible	Switch data table which describes the allocation of user data on to the TDM busses.
APR aprisaXEDualJetLineEncoding	1.3.6.1.4.1.14817.7.3.1.2.222.1.5	AprisaXEQuadJetLineEncoding	read-write	Controls the line encoding, the default is HDB3 for E1, B8ZS for T1.
APR aprisaXEDualJetLineRadioLoopback	1.3.6.1.4.1.14817.7.3.1.2.222.1.8	AprisaXEQuadJetLoopbacks	read-write	This indicates the E1 loopback setting on a port; OFF, Line or Radio Facing.
FOU aprisaXEDualJetLoopback	1.3.6.1.4.1.14817.7.3.1.2.222.1.4	FourRFLoopback	read-write	Controls the traffic loopback on a Dual JET port.
FOU aprisaXEDualJetLOSAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.221.1.8	FourRFAlarmEnabled	read-only	LOS alarm enabled or disabled.
FOU aprisaXEDualJetLOSAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.221.1.7	FourRFAlarmSeverity	read-only	LOS alarm severity.
FOU aprisaXEDualJetLOSAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.221.1.6	FourRFAlarmStatus	read-only	LOS alarm status.
APR aprisaXEDualJetPcmMode	1.3.6.1.4.1.14817.7.3.1.2.222.1.6	AprisaXEPcmMode	read-write	Controls the PCM mode, PCM31 or PCM30C.
aprisaXEDualJetPortEntry	1.3.6.1.4.1.14817.7.3.1.2.221.1		not-accessible	Dual E1 port alarms.
aprisaXEDualJetPortTable	1.3.6.1.4.1.14817.7.3.1.2.221		not-accessible	Table based on slot and port of DualJet cards alarms.
APR aprisaXEDualJetPortTablePort	1.3.6.1.4.1.14817.7.3.1.2.221.1.2	AprisaXEPortNumber	read-only	Port table index based on port number.
APR aprisaXEDualJetPortTableSlot	1.3.6.1.4.1.14817.7.3.1.2.221.1.1	AprisaXESlotNumber	read-only	Port table index based on slot number.
APR aprisaXEDualJetTrafficType	1.3.6.1.4.1.14817.7.3.1.2.222.1.3	AprisaXEQuadJetTrafficType	read-write	Controls the traffic type on a Dual JET port.
APR aprisaXEDualJetTxWaveFormShaper	1.3.6.1.4.1.14817.7.3.1.2.222.1.9	AprisaXEQuadJetWaveFormShapers	read-write	This indicates the T1 Tx Waveform Shaper for a port; 0~133 ft, 133~266 ft, 266~399 ft, 399~533 ft, 533~655 ft.
INT aprisaXEErrorCounterCommand	1.3.6.1.4.1.14817.7.3.1.2.6.7	INTEGER	read-write	Forces reset, freeze or unfreeze the error counters.
C32 aprisaXEErroredSeconds	1.3.6.1.4.1.14817.7.3.1.2.6.9	Counter32	read-only	The number of Errored Seconds for the terminal.
C32 aprisaXEErrorFreeSeconds	1.3.6.1.4.1.14817.7.3.1.2.6.8	Counter32	read-only	The number of Error Free Seconds for the terminal.
APR aprisaXEEthernetActivationStatus	1.3.6.1.4.1.14817.7.3.1.2.200.3	AprisaXECCActivationStatus	read-only	Ethernet activation status i.e activated, failed or currently busy activating.
INT aprisaXEEthernetAutonegotiationStatus	1.3.6.1.4.1.14817.7.3.1.2.96.1.2	INTEGER	read-only	The status of the port auto-negotiation.
U32 aprisaXEEthernetBandwidth	1.3.6.1.4.1.14817.7.3.1.2.95.1	Unsigned32	read-write	This controls the bandwidth allocated to ethernet in kbps, the minimum block is 8kbps, values will be rounded up to the nearest 8kbps.
aprisaXEEthernetConfiguration	1.3.6.1.4.1.14817.7.3.1.2.95
APR aprisaXEEthernetCustomerConnectionID	1.3.6.1.4.1.14817.7.3.1.2.95.3	AprisaXEConnectionID	read-write	Backplane connection ID for Customer bandwidth.
INT aprisaXEEthernetDuplexMode	1.3.6.1.4.1.14817.7.3.1.2.96.1.7	INTEGER	read-only	The current port duplex mode.
APR aprisaXEEthernetGroup	1.3.6.1.4.1.14817.7.3.1.2.97.1.2	AprisaXEEthernetGroup	read-write	The Ethernet Group of which this port is a member.
APR aprisaXEEthernetGrouping	1.3.6.1.4.1.14817.7.3.1.2.98.1	AprisaXEEthernetGrouping	read-write	Indicates whether Ethernet grouping (VLANs) is enabled or disabled.
APR aprisaXEEthernetIngressRate	1.3.6.1.4.1.14817.7.3.1.2.97.1.3	AprisaXEEthernetFrameRate	read-write	The ingress frame rate limit for this port.
INT aprisaXEEthernetJabberStatus	1.3.6.1.4.1.14817.7.3.1.2.96.1.5	INTEGER	read-only	Has jabber been detected on the port?.
INT aprisaXEEthernetLinkStatus	1.3.6.1.4.1.14817.7.3.1.2.96.1.4	INTEGER	read-only	The status of the port link.
U32 aprisaXEEthernetManagementBandwidth	1.3.6.1.4.1.14817.7.3.1.2.95.2	Unsigned32	read-write	This controls the bandwidth available to management traffic, a minimum of 8kbps is required. Values will be rounded up to the nearest 8kbps.
APR aprisaXEEthernetManagementGroup	1.3.6.1.4.1.14817.7.3.1.2.98.2	AprisaXEEthernetGroup	read-only	The Ethernet Group for management.
APR aprisaXEEthernetPBCConnectionID	1.3.6.1.4.1.14817.7.3.1.2.95.4	AprisaXEConnectionID	read-write	Backplane connection ID for Private Back Channel management bandwidth.
aprisaXEEthernetPortEntry	1.3.6.1.4.1.14817.7.3.1.2.96.1		not-accessible	Ethernet port status and configuration.
INT aprisaXEEthernetPortIndex	1.3.6.1.4.1.14817.7.3.1.2.96.1.1	INTEGER	read-only	The port index, there are four ports on the hub.
APR aprisaXEEthernetPortNum	1.3.6.1.4.1.14817.7.3.1.2.97.1.1	AprisaXEEthernetPortNumber	read-only	The port number, there are four ports on the hub.
APR aprisaXEEthernetPortPriority	1.3.6.1.4.1.14817.7.3.1.2.97.1.4	AprisaXEEthernetPortPriority	read-write	Indicates the bandwidth allocated to this port.
aprisaXEEthernetPortTable	1.3.6.1.4.1.14817.7.3.1.2.96		not-accessible	Table used to control and monitor basic ethernet features on the 4-port hub.
APR aprisaXEEthernetPrioQueueMapping	1.3.6.1.4.1.14817.7.3.1.2.98.4	AprisaXEEthernetPrioQueueMapping	read-write	Indicates the IEEE 802.1 Ethernet priority queue mapping scheme (either standard or cisco).
APR aprisaXEEthernetPrioQueueScheduling	1.3.6.1.4.1.14817.7.3.1.2.98.3	AprisaXEEthernetPrioQueueScheduling	read-write	Indicates Ethernet priority queue scheduling scheme (either strict or weighted).
INT aprisaXEEthernetRemoteFaultStatus	1.3.6.1.4.1.14817.7.3.1.2.96.1.3	INTEGER	read-only	The status of the port remote fault detection.
INT aprisaXEEthernetSpeed	1.3.6.1.4.1.14817.7.3.1.2.96.1.6	INTEGER	read-only	The current port speed, 10 or 100 Mbps.
aprisaXEEthernetTable	1.3.6.1.4.1.14817.7.3.1.2.97		not-accessible	Table used to display and configure Ethernet settings.
aprisaXEEthernetTableEntry	1.3.6.1.4.1.14817.7.3.1.2.97.1		not-accessible	Individual Ethernet port settings.
aprisaXEEthernetVlanQosSettings	1.3.6.1.4.1.14817.7.3.1.2.98
aprisaXEEvents	1.3.6.1.4.1.14817.7.3.1.3			The root of the OID sub-tree for the AprisaXE product events.
aprisaXEEventsV2	1.3.6.1.4.1.14817.7.3.1.3.0			The AprisaXE product events, ensures SNMPv1 compatibility.
APR aprisaXEExpectedBoardType	1.3.6.1.4.1.14817.7.3.1.2.66.1.3	AprisaXECardType	read-write	The type of the board expected in the slot. The types are as follows: - none : there is no card in the slot - modem : this card will be fitted in physical slot 0 - transmitter : the transmitter card, this will be in physical slot 9 - receiver : the receiver card, this will be in physical slot 10 - quadJET : e1/t1 4 port card
aprisaXEExternalAlarm1	1.3.6.1.4.1.14817.7.3.1.2.11.1
STR aprisaXEExternalAlarm1Description	1.3.6.1.4.1.14817.7.3.1.2.11.1.5	DisplayString	read-write	A description (user defined) for the external alarm.
FOU aprisaXEExternalAlarm1Enabled	1.3.6.1.4.1.14817.7.3.1.2.11.1.3	FourRFAlarmEnabled	read-write	Indicates whether the first external alarm input is enabled. If not changes to the input will be ignored. By default the alarm is enabled.
aprisaXEExternalAlarm1Group	1.3.6.1.4.1.14817.7.3.1.1.11			The AprisaXE first external alarm input group.
APR aprisaXEExternalAlarm1Mapping	1.3.6.1.4.1.14817.7.3.1.2.11.1.4	AprisaXEAlarmMapping	read-write	This defines how the first external alarm input is mapped to the remote alarms.
FOU aprisaXEExternalAlarm1Severity	1.3.6.1.4.1.14817.7.3.1.2.11.1.2	FourRFAlarmSeverity	read-write	The severity of the first external alarm input.
FOU aprisaXEExternalAlarm1Status	1.3.6.1.4.1.14817.7.3.1.2.11.1.1	FourRFAlarmStatus	read-only	The status of the first external alarm input.
aprisaXEExternalAlarm2	1.3.6.1.4.1.14817.7.3.1.2.11.2
STR aprisaXEExternalAlarm2Description	1.3.6.1.4.1.14817.7.3.1.2.11.2.5	DisplayString	read-write	A description (user defined) for the external alarm.
FOU aprisaXEExternalAlarm2Enabled	1.3.6.1.4.1.14817.7.3.1.2.11.2.3	FourRFAlarmEnabled	read-write	Indicates whether the second external alarm input is enabled. If not changes to the input will be ignored. By default the alarm is enabled.
aprisaXEExternalAlarm2Group	1.3.6.1.4.1.14817.7.3.1.1.16			The AprisaXE second external alarm input group.
APR aprisaXEExternalAlarm2Mapping	1.3.6.1.4.1.14817.7.3.1.2.11.2.4	AprisaXEAlarmMapping	read-write	This defines how the second external alarm input is mapped to the remote alarms.
FOU aprisaXEExternalAlarm2Severity	1.3.6.1.4.1.14817.7.3.1.2.11.2.2	FourRFAlarmSeverity	read-write	The severity of the second external alarm input.
FOU aprisaXEExternalAlarm2Status	1.3.6.1.4.1.14817.7.3.1.2.11.2.1	FourRFAlarmStatus	read-only	The status of the second external alarm input.
aprisaXEExternalAlarmOutputFour	1.3.6.1.4.1.14817.7.3.1.2.11.8
aprisaXEExternalAlarmOutputFourGroup	1.3.6.1.4.1.14817.7.3.1.1.15			The AprisaXE fourth external alarm output group.
APR aprisaXEExternalAlarmOutputFourMapping	1.3.6.1.4.1.14817.7.3.1.2.11.8.2	AprisaXEAlarmMapping	read-write	This defines how the fourth external alarm output is mapped to the alarms.
FOU aprisaXEExternalAlarmOutputFourStatus	1.3.6.1.4.1.14817.7.3.1.2.11.8.1	FourRFAlarmStatus	read-only	The status of the fourth external alarm output.
aprisaXEExternalAlarmOutputOne	1.3.6.1.4.1.14817.7.3.1.2.11.5
aprisaXEExternalAlarmOutputOneGroup	1.3.6.1.4.1.14817.7.3.1.1.12			The AprisaXE first external alarm output group.
APR aprisaXEExternalAlarmOutputOneMapping	1.3.6.1.4.1.14817.7.3.1.2.11.5.2	AprisaXEAlarmMapping	read-write	This defines how the first external alarm output is mapped to the alarms.
FOU aprisaXEExternalAlarmOutputOneStatus	1.3.6.1.4.1.14817.7.3.1.2.11.5.1	FourRFAlarmStatus	read-only	The status of the first external alarm output.
INT aprisaXEExternalAlarmOutputPolarity	1.3.6.1.4.1.14817.7.3.1.2.11.4	INTEGER	read-write	Indicates the polarity used to indicate the presence of an alarm at an external alarm output, this may be different from the input polarity.
aprisaXEExternalAlarmOutputThree	1.3.6.1.4.1.14817.7.3.1.2.11.7
aprisaXEExternalAlarmOutputThreeGroup	1.3.6.1.4.1.14817.7.3.1.1.14			The AprisaXE third external alarm output group.
APR aprisaXEExternalAlarmOutputThreeMapping	1.3.6.1.4.1.14817.7.3.1.2.11.7.2	AprisaXEAlarmMapping	read-write	This defines how the third external alarm output is mapped to the alarms.
FOU aprisaXEExternalAlarmOutputThreeStatus	1.3.6.1.4.1.14817.7.3.1.2.11.7.1	FourRFAlarmStatus	read-only	The status of the third external alarm output.
aprisaXEExternalAlarmOutputTwo	1.3.6.1.4.1.14817.7.3.1.2.11.6
aprisaXEExternalAlarmOutputTwoGroup	1.3.6.1.4.1.14817.7.3.1.1.13			The AprisaXE second external alarm output group.
APR aprisaXEExternalAlarmOutputTwoMapping	1.3.6.1.4.1.14817.7.3.1.2.11.6.2	AprisaXEAlarmMapping	read-write	This defines how the second external alarm output is mapped to the alarms.
FOU aprisaXEExternalAlarmOutputTwoStatus	1.3.6.1.4.1.14817.7.3.1.2.11.6.1	FourRFAlarmStatus	read-only	The status of the second external alarm output.
APR aprisaXEExternalAlarmPolarity	1.3.6.1.4.1.14817.7.3.1.2.11.3	AprisaXEAlarmPolarity	read-write	Indicates the polarity used to indicate the presence of an alarm at an external alarm input.
aprisaXEExternalAlarms	1.3.6.1.4.1.14817.7.3.1.2.11
aprisaXEExternalAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.17			The AprisaXE general external alarm details group.
FOU aprisaXEFan1Status	1.3.6.1.4.1.14817.7.3.1.2.21.1	FourRFFanStatus	read-only	The status of the fan one.
FOU aprisaXEFan2Status	1.3.6.1.4.1.14817.7.3.1.2.21.2	FourRFFanStatus	read-only	The status of the fan two.
INT aprisaXEFanEnable	1.3.6.1.4.1.14817.7.3.1.2.21.3	INTEGER	read-write	Turn the fans on or off.
aprisaXEFanGroup	1.3.6.1.4.1.14817.7.3.1.1.26			The AprisaXE fan status group.
aprisaXEFans	1.3.6.1.4.1.14817.7.3.1.2.21
aprisaXEForwardPowerHiAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.1
I32 aprisaXEForwardPowerHiAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.1.5	Integer32	read-only	Indicates the level at which the forward power alarm will be cleared.
FOU aprisaXEForwardPowerHiAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.1.3	FourRFAlarmEnabled	read-only	Indicates whether the forward power too high alarm is enabled.
FOU aprisaXEForwardPowerHiAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.1.2	FourRFAlarmSeverity	read-only	The severity of the forward power too high alarm.
aprisaXEForwardPowerHiAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.56			The AprisaXE forward power too high alarm group.
FOU aprisaXEForwardPowerHiAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.1.1	FourRFAlarmStatus	read-only	The status of the forward power too high alarm.
I32 aprisaXEForwardPowerHiAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.1.4	Integer32	read-only	Indicates the level at which the forward power too high alarm will be set.
aprisaXEForwardPowerLoAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.2
I32 aprisaXEForwardPowerLoAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.2.5	Integer32	read-only	Indicates the level at which the forward power too low alarm will be cleared.
FOU aprisaXEForwardPowerLoAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.2.3	FourRFAlarmEnabled	read-only	Indicates whether the forward power too low alarm is enabled.
FOU aprisaXEForwardPowerLoAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.2.2	FourRFAlarmSeverity	read-only	The severity of the forward power too low alarm.
aprisaXEForwardPowerLoAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.61			The AprisaXE forward power low alarm group.
FOU aprisaXEForwardPowerLoAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.2.1	FourRFAlarmStatus	read-only	The status of the forward power too low alarm.
I32 aprisaXEForwardPowerLoAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.2.4	Integer32	read-only	Indicates the level at which the forward power too low alarm will be set.
APR aprisaXEFXOABitFault	1.3.6.1.4.1.14817.7.3.1.2.140.1.16	AprisaXE2WireSignalState	read-write	Set the CAS A fault bit to Transparent Normal, Transparent Inverted, Forced Normal or Forced Inverted.
APR aprisaXEFXOABitOffHook	1.3.6.1.4.1.14817.7.3.1.2.140.1.21	AprisaXE2WireSignalState	read-write	Set the CAS A off hook bit to Transparent Normal, Transparent Inverted, Forced Normal or Forced Inverted.
APR aprisaXEFXOAdpcmCompression	1.3.6.1.4.1.14817.7.3.1.2.130.1.4	AprisaXEAdpcmCompression	read-write	ADPCM compression 16, 24, 32, 64 kbps or none.
APR aprisaXEFXOBBitRing	1.3.6.1.4.1.14817.7.3.1.2.140.1.17	AprisaXE2WireSignalState	read-write	Set the CAS B ring bit to Transparent Normal, Transparent Inverted, Forced Normal or Forced Inverted.
INT aprisaXEFXOCasMode	1.3.6.1.4.1.14817.7.3.1.2.140.1.5	INTEGER	read-write	Set the CAS mode to XE,SE or 4Wire compatible.
APR aprisaXEFXOCasSignal	1.3.6.1.4.1.14817.7.3.1.2.140.1.6	AprisaXESignalState	read-write	Set the CAS signal to normal or invert.
APR aprisaXEFXOCBitBilling	1.3.6.1.4.1.14817.7.3.1.2.140.1.18	AprisaXE2WireSignalState	read-write	Set the CAS C billing bit to Transparent Normal, Transparent Inverted, Forced Normal or Forced Inverted.
APR aprisaXEFXOConnectionID	1.3.6.1.4.1.14817.7.3.1.2.130.1.7	AprisaXEConnectionID	read-write	Associated cross-connect Backplane Connection ID.
APR aprisaXEFXOControlSlotIndex	1.3.6.1.4.1.14817.7.3.1.2.140.1.1	AprisaXESlotNumber	read-only	Slot index for FXO Control table.
aprisaXEFXOControlTable	1.3.6.1.4.1.14817.7.3.1.2.140		not-accessible	Control table for FXO.
aprisaXEFXOControlTableEntry	1.3.6.1.4.1.14817.7.3.1.2.140.1		not-accessible	Entries for FXO table.
APR aprisaXEFXODBitReversals	1.3.6.1.4.1.14817.7.3.1.2.140.1.19	AprisaXE2WireSignalState	read-write	Set the CAS D reversals bit to Transparent Normal, Transparent Inverted, Forced Normal or Forced Inverted.
INT aprisaXEFXOEchoCanceller	1.3.6.1.4.1.14817.7.3.1.2.140.1.20	INTEGER	read-write	Set the echo canceller to off, on or auto. The reserved values are for internal use only and cannot be set via SNMP.
APR aprisaXEFXOInputLevel	1.3.6.1.4.1.14817.7.3.1.2.130.1.9	AprisaXEFXOInputLevel	read-write	Input Level -10.0 dBr to +1.0 dBr in half dB steps.
INT aprisaXEFXOLineImpedance	1.3.6.1.4.1.14817.7.3.1.2.140.1.14	INTEGER	read-write	Set the line impedance to 600 Ohms, 900 Ohms, 600 Ohms + 2.16 uF, 900 Ohms + 2.16 uF, TN12 - 220 Ohms + (820 Ohms \|\| 120 nF), TBR21 - 270 Ohms + (750 Ohms \|\| 150 nF), BT3 - 370 Ohms + (620 Ohms \|\| 310 nF), BT Network - 320 Ohms + (1050 Ohms \|\| 210 nF), China - 200 Ohms + (680 Ohms \|\| 100 nF)
INT aprisaXEFXOLineReversal	1.3.6.1.4.1.14817.7.3.1.2.140.1.15	INTEGER	read-write	Set the line reversal on/off.
FOU aprisaXEFXOLoopback	1.3.6.1.4.1.14817.7.3.1.2.130.1.3	FourRFLoopback	read-write	Loopback control on or off for ports.
INT aprisaXEFXOLoopCurrentLimit	1.3.6.1.4.1.14817.7.3.1.2.140.1.11	INTEGER	read-write	Set the loop current limiter to off or on.
INT aprisaXEFXOMinLoopCurrent	1.3.6.1.4.1.14817.7.3.1.2.140.1.12	INTEGER	read-write	Set the min loop current to low, medium or high.
INT aprisaXEFXOOnHookSpeed	1.3.6.1.4.1.14817.7.3.1.2.140.1.8	INTEGER	read-write	Set the on hook speed to fast, medium or slow.
APR aprisaXEFXOOutputLevel	1.3.6.1.4.1.14817.7.3.1.2.130.1.10	AprisaXEFXOOutputLevel	read-write	Output Level -10.0 dBr to +1.0 dBr in 0.5 dB steps.
APR aprisaXEFXOPCMLaw	1.3.6.1.4.1.14817.7.3.1.2.140.1.7	AprisaXEPcmLaw	read-write	Set the PCM law to A-law or u-law.
APR aprisaXEFXOPortControlSlotIndex	1.3.6.1.4.1.14817.7.3.1.2.130.1.1	AprisaXESlotNumber	read-only	Slot index for FXO Control table.
aprisaXEFXOPortControlTable	1.3.6.1.4.1.14817.7.3.1.2.130		not-accessible	Port Control table for FXO.
aprisaXEFXOPortControlTableEntry	1.3.6.1.4.1.14817.7.3.1.2.130.1		not-accessible	Entries for FXO table.
APR aprisaXEFXOPortIndex	1.3.6.1.4.1.14817.7.3.1.2.130.1.2	AprisaXEPortNumber	read-only	Port index for FXO Control table.
INT aprisaXEFXORingerImpedance	1.3.6.1.4.1.14817.7.3.1.2.140.1.9	INTEGER	read-write	Set the ringer impedance to high or synthesized.
INT aprisaXEFXORingerThreshold	1.3.6.1.4.1.14817.7.3.1.2.140.1.10	INTEGER	read-write	Set the ringer threshold to low, medium or high.
INT aprisaXEFXORxGain	1.3.6.1.4.1.14817.7.3.1.2.130.1.5	INTEGER	read-write	Rx gain -10 dB to 10 dB in 0.5 dB steps.
APR aprisaXEFXOSignallingConnectionID	1.3.6.1.4.1.14817.7.3.1.2.130.1.8	AprisaXEConnectionID	read-write	Associated signalling cross-connect Backplane Connection ID.
INT aprisaXEFXOSPMBandwidth	1.3.6.1.4.1.14817.7.3.1.2.140.1.2	INTEGER	read-write	Set the spm detector bandwidth to 1.5%, 3.5%, 5.5% or 7.5%.
INT aprisaXEFXOSPMFrequency	1.3.6.1.4.1.14817.7.3.1.2.140.1.3	INTEGER	read-write	Set the spm detector frequency to 12kHz or 16kHz.
APR aprisaXEFXOSPMLevel	1.3.6.1.4.1.14817.7.3.1.2.140.1.4	AprisaXEFXSPMLevel	read-write	Set the spm detector level 0 to 27 dB.
INT aprisaXEFXOTipRingVoltage	1.3.6.1.4.1.14817.7.3.1.2.140.1.13	INTEGER	read-write	Set the tip ring voltage to low, medium or high.
INT aprisaXEFXOTxGain	1.3.6.1.4.1.14817.7.3.1.2.130.1.6	INTEGER	read-write	Tx gain -10 dB to 10 dB in half dB steps.
APR aprisaXEFXSABitFault	1.3.6.1.4.1.14817.7.3.1.2.195.1.15	AprisaXE2WireSignalState	read-write	Set the CAS A fault bit to Transparent Normal, Transparent Inverted, Forced Normal or Forced Inverted.
APR aprisaXEFXSABitOffHook	1.3.6.1.4.1.14817.7.3.1.2.195.1.20	AprisaXE2WireSignalState	read-write	Set the CAS A off hook bit to Transparent Normal, Transparent Inverted, Forced Normal or Forced Inverted.
APR aprisaXEFXSAdpcmCompression	1.3.6.1.4.1.14817.7.3.1.2.190.1.4	AprisaXEAdpcmCompression	read-write	ADPCM compression 16, 24, 32, 64 kbps or none.
APR aprisaXEFXSBBitRing	1.3.6.1.4.1.14817.7.3.1.2.195.1.16	AprisaXE2WireSignalState	read-write	Set the CAS B ring bit to Transparent Normal, Transparent Inverted, Forced Normal or Forced Inverted.
INT aprisaXEFXSBillingToneAmplitude	1.3.6.1.4.1.14817.7.3.1.2.195.1.5	INTEGER	read-write	Set the billing tone generator amplitude to 400mV, 300mV, 250mV, 200mV, 150mV, 100mV or 50mV. Note, that software release 7.3.x only supports 400mV, 300mV, 200mV and 100mV.
INT aprisaXEFXSBillingToneDecay	1.3.6.1.4.1.14817.7.3.1.2.195.1.6	INTEGER	read-write	Set the billing tone generator attack decay ramp to 0.2ms, 0.5ms, 1ms, 2ms, 5ms, 10ms or 20ms.
INT aprisaXEFXSBillingToneFrequency	1.3.6.1.4.1.14817.7.3.1.2.195.1.4	INTEGER	read-write	Set the billing tone generator frequency to 12kHz or 16kHz.
INT aprisaXEFXSCalibrate	1.3.6.1.4.1.14817.7.3.1.2.195.1.14	INTEGER	read-write	Recalibrate the card yes/no.
INT aprisaXEFXSCasMode	1.3.6.1.4.1.14817.7.3.1.2.195.1.10	INTEGER	read-write	Set the CAS mode to XE,SE or 4Wire compatible.
APR aprisaXEFXSCasSignal	1.3.6.1.4.1.14817.7.3.1.2.195.1.11	AprisaXESignalState	read-write	Set the CAS signal to normal or invert.
APR aprisaXEFXSCBitBilling	1.3.6.1.4.1.14817.7.3.1.2.195.1.17	AprisaXE2WireSignalState	read-write	Set the CAS C billing bit to Transparent Normal, Transparent Inverted, Forced Normal or Forced Inverted.
APR aprisaXEFXSConnectionID	1.3.6.1.4.1.14817.7.3.1.2.190.1.7	AprisaXEConnectionID	read-write	Associated cross-connect Backplane Connection ID.
APR aprisaXEFXSControlSlotIndex	1.3.6.1.4.1.14817.7.3.1.2.195.1.1	AprisaXESlotNumber	read-only	Slot index for FXS Control table.
aprisaXEFXSControlTable	1.3.6.1.4.1.14817.7.3.1.2.195		not-accessible	Control table for FXS.
aprisaXEFXSControlTableEntry	1.3.6.1.4.1.14817.7.3.1.2.195.1		not-accessible	Entries for FXS table.
APR aprisaXEFXSDBitReversals	1.3.6.1.4.1.14817.7.3.1.2.195.1.18	AprisaXE2WireSignalState	read-write	Set the CAS D reversals bit to Transparent Normal, Transparent Inverted, Forced Normal or Forced Inverted.
INT aprisaXEFXSEchoCanceller	1.3.6.1.4.1.14817.7.3.1.2.195.1.3	INTEGER	read-write	Set the echo canceller to on or off.
APR aprisaXEFXSInputLevel	1.3.6.1.4.1.14817.7.3.1.2.190.1.9	AprisaXEFXSInputLevel	read-write	Input Level -9.0 dBr to +3.0 dBr in half dB steps.
INT aprisaXEFXSLineImpedance	1.3.6.1.4.1.14817.7.3.1.2.195.1.9	INTEGER	read-write	Set the subscriber line impedance to 600 Ohms, 900 Ohms, 600 Ohms + 2.16 uF, 900 Ohms + 2.16 uF, TN12 - 220 Ohms + (820 Ohms \|\| 120 nF), TBR21 - 270 Ohms + (750 Ohms \|\| 150 nF), BT3 - 370 Ohms + (620 Ohms \|\| 310 nF)
INT aprisaXEFXSLineReversal	1.3.6.1.4.1.14817.7.3.1.2.195.1.13	INTEGER	read-write	Set the line reversal on/off.
FOU aprisaXEFXSLoopback	1.3.6.1.4.1.14817.7.3.1.2.190.1.3	FourRFLoopback	read-write	Loopback control on or off for ports.
INT aprisaXEFXSLoopParameters	1.3.6.1.4.1.14817.7.3.1.2.195.1.19	INTEGER	read-write	Set the loop parameters to 'default' or 'Telkom SA Limited'.
APR aprisaXEFXSOutputLevel	1.3.6.1.4.1.14817.7.3.1.2.190.1.10	AprisaXEFXSOutputLevel	read-write	Output Level -9.5 dBr to +2.5 dBr in 0.5 dB steps.
APR aprisaXEFXSPathMute	1.3.6.1.4.1.14817.7.3.1.2.190.1.11	AprisaXEFXSPathMute	read-write	Applies DFXS Mute Function - No Mute, Mute Rx or Mute Tx.
APR aprisaXEFXSPCMLaw	1.3.6.1.4.1.14817.7.3.1.2.195.1.2	AprisaXEPcmLaw	read-write	Set the PCM law to A-law or u-law.
APR aprisaXEFXSPortControlSlotIndex	1.3.6.1.4.1.14817.7.3.1.2.190.1.1	AprisaXESlotNumber	read-only	Slot index for FXS Control table.
aprisaXEFXSPortControlTable	1.3.6.1.4.1.14817.7.3.1.2.190		not-accessible	Port Control table for FXS.
aprisaXEFXSPortControlTableEntry	1.3.6.1.4.1.14817.7.3.1.2.190.1		not-accessible	Entries for FXS table.
APR aprisaXEFXSPortIndex	1.3.6.1.4.1.14817.7.3.1.2.190.1.2	AprisaXEPortNumber	read-only	Port index for FXS Control table.
INT aprisaXEFXSRingerAmplitude	1.3.6.1.4.1.14817.7.3.1.2.195.1.8	INTEGER	read-write	Set the ringer amplitude to 40 V RMS, 45 V RMS, 50 V RMS, 55 V RMS or 60 V RMS.
INT aprisaXEFXSRingerFrequency	1.3.6.1.4.1.14817.7.3.1.2.195.1.7	INTEGER	read-write	Set the ringer frequency to 17Hz, 25Hz or 50Hz.
INT aprisaXEFXSRxGain	1.3.6.1.4.1.14817.7.3.1.2.190.1.5	INTEGER	read-write	Rx gain -9.5 dB to +3 dB in 0.5 dB steps.
APR aprisaXEFXSSignallingConnectionID	1.3.6.1.4.1.14817.7.3.1.2.190.1.8	AprisaXEConnectionID	read-write	Associated signalling cross-connect Backplane Connection ID.
INT aprisaXEFXSTransHybridBalance	1.3.6.1.4.1.14817.7.3.1.2.195.1.12	INTEGER	read-write	Set the trans hybrid balance to 4.08dB, 2.5dB, 1.16dB, 0dB, -1.02dB, -1.94dB, -2.77dB, Off
INT aprisaXEFXSTxGain	1.3.6.1.4.1.14817.7.3.1.2.190.1.6	INTEGER	read-write	Tx gain -3 dB to 9.5 dB in 0.5 dB steps.
aprisaXEGroups	1.3.6.1.4.1.14817.7.3.1.1			The root of the OID sub-tree for the AprisaXE object groups.
aprisaXEHSDParameterCompare	1.3.6.1.4.1.14817.7.3.1.2.235
INT aprisaXEHSDParameterCompareChecking	1.3.6.1.4.1.14817.7.3.1.2.235.2	INTEGER	read-write	Enables/disables HSD paramter compare checking between Radio A and Radio B
aprisaXEHSDParameterCompareGroup	1.3.6.1.4.1.14817.7.3.1.1.305			The AprisaXE HSD Parameter Comparison group.
FOU aprisaXEHSDParameterMismatch	1.3.6.1.4.1.14817.7.3.1.2.235.1	FourRFAlarmStatus	read-only	If there is a parameter (OID) mismatch between Radio A and Radio B
INT aprisaXEHSSCarrierDetectMode	1.3.6.1.4.1.14817.7.3.1.2.207.1.11	INTEGER	read-write	Select 1 of 4 DCD modes.
INT aprisaXEHSSClockSelection	1.3.6.1.4.1.14817.7.3.1.2.207.1.12	INTEGER	read-write	Select the clock mode internal to the HSS traffic path.
APR aprisaXEHSSConnectionID	1.3.6.1.4.1.14817.7.3.1.2.207.1.2	AprisaXEConnectionID	read-write	Backplane Connection ID for data connection.
APR aprisaXEHSSControlSlotIndex	1.3.6.1.4.1.14817.7.3.1.2.207.1.1	AprisaXESlotNumber	read-only	Slot index for HSS Control Table.
aprisaXEHSSControlTable	1.3.6.1.4.1.14817.7.3.1.2.207		not-accessible	Control table for HSS.
aprisaXEHSSControlTableEntry	1.3.6.1.4.1.14817.7.3.1.2.207.1		not-accessible	Entries for HSS table.
INT aprisaXEHSSDataReadyMode	1.3.6.1.4.1.14817.7.3.1.2.207.1.10	INTEGER	read-write	Select 1 of 8 DSR/DTR modes.
APR aprisaXEHSSEquipmentMode	1.3.6.1.4.1.14817.7.3.1.2.207.1.4	AprisaXESerialEquipmentMode	read-only	Terminal Equipment mode, DCE or DTE, this is a direct reflection of the equipment mode based on the type of cable currently connected. The value is not defined if no cable is attached.
FOU aprisaXEHSSLoopback	1.3.6.1.4.1.14817.7.3.1.2.207.1.5	FourRFLoopback	read-write	Interface loopback control.
FOU aprisaXEHSSNetworkClockSource	1.3.6.1.4.1.14817.7.3.1.2.207.1.6	FourRFNetworkClockSelect	read-write	Controls whether the port drive the clock source or not.
INT aprisaXEHSSSendHandshakingMode	1.3.6.1.4.1.14817.7.3.1.2.207.1.9	INTEGER	read-write	Select 1 of 8 RTS/CTS modes of operation.
INT aprisaXEHSSSerialBaudRate	1.3.6.1.4.1.14817.7.3.1.2.207.1.7	INTEGER	read-write	Serial Baud rate where 1 = 8kbps and 256 = 2Mbps.
APR aprisaXEHSSSerialMode	1.3.6.1.4.1.14817.7.3.1.2.207.1.14	AprisaXEHssSerialMode	read-only	Indicates the type of serial interface cable is connected to the HSS port.
APR aprisaXEHSSSignallingID	1.3.6.1.4.1.14817.7.3.1.2.207.1.3	AprisaXEConnectionID	read-write	Backplane connection ID for signalling/control connection.
INT aprisaXEHSSV110BaudRate	1.3.6.1.4.1.14817.7.3.1.2.207.1.8	INTEGER	read-write	V110 baud rate.
INT aprisaXEHSSXTxCEnabled	1.3.6.1.4.1.14817.7.3.1.2.207.1.13	INTEGER	read-write	Select whether XTxC generation is enabled or disabled for the port. The default is enabled.
FOU aprisaXEInterfaceAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.100.1.3	FourRFAlarmStatus	read-only	Indicates the current alarm status for the interface.
APR aprisaXEInterfaceIndex	1.3.6.1.4.1.14817.7.3.1.2.100.1.1	AprisaXESlotNumber	read-only	The slot containing the interface card, slots 0 to 8 (AUX or A-H) inclusive may contain interface cards.
U32 aprisaXEInterfacePort1Bandwidth	1.3.6.1.4.1.14817.7.3.1.2.100.1.4	Unsigned32	read-only	Indicates the bandwidth allocated to port 1.
U32 aprisaXEInterfacePort2Bandwidth	1.3.6.1.4.1.14817.7.3.1.2.100.1.5	Unsigned32	read-only	Indicates the bandwidth allocated to port 2.
U32 aprisaXEInterfacePort3Bandwidth	1.3.6.1.4.1.14817.7.3.1.2.100.1.6	Unsigned32	read-only	Indicates the bandwidth allocated to port 3.
U32 aprisaXEInterfacePort4Bandwidth	1.3.6.1.4.1.14817.7.3.1.2.100.1.7	Unsigned32	read-only	Indicates the bandwidth allocated to port 4.
aprisaXEInterfaceTable	1.3.6.1.4.1.14817.7.3.1.2.100		not-accessible	Table used to monitor the current interface status.
aprisaXEInterfaceTableEntry	1.3.6.1.4.1.14817.7.3.1.2.100.1		not-accessible	Interface bandwidth and status.
APR aprisaXEInterfaceType	1.3.6.1.4.1.14817.7.3.1.2.100.1.2	AprisaXECardType	read-only	Indicates the type of interface card.
aprisaXELinkAlarms	1.3.6.1.4.1.14817.7.3.1.2.86
APR aprisaXEMajorRemoteAlarmOutput	1.3.6.1.4.1.14817.7.3.1.2.16.2	AprisaXEAlarmOutput	read-write	This defines how the remote major alarm is mapped to the external alarm outputs.
FOU aprisaXEMajorRemoteAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.16.1	FourRFAlarmStatus	read-only	The status of the remote major alarm.
aprisaXEMHSB	1.3.6.1.4.1.14817.7.3.1.2.19
FOU aprisaXEMHSBCommand	1.3.6.1.4.1.14817.7.3.1.2.19.3	FourRFMHSBCommand	read-write	Commands to apply while in MHSB mode.
INT aprisaXEMHSBEnable	1.3.6.1.4.1.14817.7.3.1.2.19.2	INTEGER	read-write	Set the terminal into Monitored Hot Standby Mode.
aprisaXEMHSBGroup	1.3.6.1.4.1.14817.7.3.1.1.23			The aprisaXE MHSB group.
FOU aprisaXEMHSBStatus	1.3.6.1.4.1.14817.7.3.1.2.19.1	FourRFMHSBStatus	read-only	The state of an MHSB configured terminal.
FOU aprisaXEMHSBSwitchoverStatus	1.3.6.1.4.1.14817.7.3.1.2.19.5	FourRFAlarmStatus	read-only	Status of the alarm reflecting if a switchover has occurred.
INT aprisaXEMHSBTerminalSelect	1.3.6.1.4.1.14817.7.3.1.2.19.4	INTEGER	read-write	Configure terminal as terminal A or terminal B of an MHSB pair.
APR aprisaXEMinorRemoteAlarmOutput	1.3.6.1.4.1.14817.7.3.1.2.16.11	AprisaXEAlarmOutput	read-write	This defines how the remote minor alarm is mapped to the external alarm outputs.
FOU aprisaXEMinorRemoteAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.16.10	FourRFAlarmStatus	read-only	The status of the remote minor alarm.
aprisaXEModem	1.3.6.1.4.1.14817.7.3.1.2.61
aprisaXEModemAlarms	1.3.6.1.4.1.14817.7.3.1.2.86.10
INT aprisaXEModemConfigVersion	1.3.6.1.4.1.14817.7.3.1.2.61.11	INTEGER	read-only	Modem Configuration file version.
FOU aprisaXEModemDemodAligmentStatus	1.3.6.1.4.1.14817.7.3.1.2.61.1	FourRFAlarmStatus	read-only	Status of the demodulator alignment.
INT aprisaXEModemFreqOffsetEnable	1.3.6.1.4.1.14817.7.3.1.2.61.8	INTEGER	read-write	Turn the Modulator frequency offset of 50kHz on or off.
aprisaXEModemGroup	1.3.6.1.4.1.14817.7.3.1.1.53			The AprisaXE Modem settings group.
INT aprisaXEModemInterleaverEnable	1.3.6.1.4.1.14817.7.3.1.2.61.9	INTEGER	read-write	Interleaver being used on the modem. Trade off between link latency and FEC performance.
APR aprisaXEModemIQData	1.3.6.1.4.1.14817.7.3.1.2.61.6	AprisaXEIQData	read-only	A list of I/Q data pairs, this is a sequence of byes values the first byte is an I value, the second a Q value.
INT aprisaXEModemQPSKCoding	1.3.6.1.4.1.14817.7.3.1.2.61.10	INTEGER	read-write	Encoding and Decoding being used for QPSK. Can be either Gray coded or non Gray coded.
FOU aprisaXEModemRefAStatus	1.3.6.1.4.1.14817.7.3.1.2.61.3	FourRFAlarmStatus	read-only	Status of the REFa clock.
FOU aprisaXEModemRefBStatus	1.3.6.1.4.1.14817.7.3.1.2.61.4	FourRFAlarmStatus	read-only	Status of the REFb clock.
FOU aprisaXEModemSNR	1.3.6.1.4.1.14817.7.3.1.2.6.3	FourRFSNR	read-only	The modem signal to noise ratio.
aprisaXEModemSyncAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.10.1
FOU aprisaXEModemSyncAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.10.1.3	FourRFAlarmEnabled	read-only	Indicates whether the loss of modem sync alarm is enabled.
FOU aprisaXEModemSyncAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.10.1.2	FourRFAlarmSeverity	read-only	The severity of the loss of modem sync alarm.
FOU aprisaXEModemSyncAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.10.1.1	FourRFAlarmStatus	read-only	The status of the loss of modem sync alarm.
FOU aprisaXEModemSyncStatus	1.3.6.1.4.1.14817.7.3.1.2.61.7	FourRFAlarmStatus	read-only	Status of the link lock.
FOU aprisaXEModemTdmAligmentStatus	1.3.6.1.4.1.14817.7.3.1.2.61.2	FourRFAlarmStatus	read-only	Status of the TDM alignment.
NUM aprisaXEModemUncorrectableBlockCount	1.3.6.1.4.1.14817.7.3.1.2.61.5	FourRFErrorCounter	read-only	Count of uncorrectable blocks since last read.
INT aprisaXEMotherboardExtendedModeCapable	1.3.6.1.4.1.14817.7.3.1.2.200.2	INTEGER	read-only	Allows the cross connect application to determine whether to stripe cross connections or not.
FOU aprisaXEMotherboardSerialNumber	1.3.6.1.4.1.14817.7.3.1.2.1.13	FourRFSerialNumber	read-only	The unique serial number for the motherboard.
aprisaXEObjects	1.3.6.1.4.1.14817.7.3.1.2			The root of the OID sub-tree for the AprisaXE product objects.
aprisaXEPerformance	1.3.6.1.4.1.14817.7.3.1.2.6
aprisaXEPerformanceGroup	1.3.6.1.4.1.14817.7.3.1.1.6			The AprisaXE terminal performance group.
APR aprisaXEPSCActiveRadio	1.3.6.1.4.1.14817.7.3.1.2.230.1.2	AprisaXEPSCActiveRadio	read-write	Indicates the reception mode of the PSC.
APR aprisaXEPSCActiveTx	1.3.6.1.4.1.14817.7.3.1.2.230.1.3	AprisaXEPSCActiveTx	read-only	Indicates the currently active transmitter.
APR aprisaXEPSCControlSlotIndex	1.3.6.1.4.1.14817.7.3.1.2.230.1.1	AprisaXESlotNumber	read-only	Slot index for PSC Control Table.
aprisaXEPSCControlTable	1.3.6.1.4.1.14817.7.3.1.2.230		not-accessible	Control table for PSC.
aprisaXEPSCControlTableEntry	1.3.6.1.4.1.14817.7.3.1.2.230.1		not-accessible	Entries for PSC table.
FOU aprisaXEPSCDemodAlignmentStatusPIC	1.3.6.1.4.1.14817.7.3.1.2.230.1.5	FourRFAlarmStatus	read-only	Status of the demodulator alignment on the PIC.
FOU aprisaXEPSCDemodAlignmentStatusPSC	1.3.6.1.4.1.14817.7.3.1.2.230.1.4	FourRFAlarmStatus	read-only	Status of the demodulator alignment on the PSC.
STR aprisaXEPscRadioABERExponent	1.3.6.1.4.1.14817.7.3.1.2.6.18	DisplayString	read-only	The exponent of the Bit Error Rate for the terminal.
C32 aprisaXEPscRadioAErroredSeconds	1.3.6.1.4.1.14817.7.3.1.2.6.17	Counter32	read-only	The number of Errored Seconds for the terminal.
C32 aprisaXEPscRadioAErrorFreeSeconds	1.3.6.1.4.1.14817.7.3.1.2.6.16	Counter32	read-only	The number of Error Free Seconds for the terminal.
NUM aprisaXEPscRadioAUncorrectableErrorCount	1.3.6.1.4.1.14817.7.3.1.2.6.15	FourRFErrorCounter	read-only	The terminal uncorrectable error count.
STR aprisaXEPscRadioBBERExponent	1.3.6.1.4.1.14817.7.3.1.2.6.22	DisplayString	read-only	The exponent of the Bit Error Rate for the terminal.
C32 aprisaXEPscRadioBErroredSeconds	1.3.6.1.4.1.14817.7.3.1.2.6.21	Counter32	read-only	The number of Errored Seconds for the terminal.
C32 aprisaXEPscRadioBErrorFreeSeconds	1.3.6.1.4.1.14817.7.3.1.2.6.20	Counter32	read-only	The number of Error Free Seconds for the terminal.
NUM aprisaXEPscRadioBUncorrectableErrorCount	1.3.6.1.4.1.14817.7.3.1.2.6.19	FourRFErrorCounter	read-only	The terminal uncorrectable error count.
STR aprisaXEPscSysBERExponent	1.3.6.1.4.1.14817.7.3.1.2.6.14	DisplayString	read-only	The exponent of the Bit Error Rate for the terminal.
C32 aprisaXEPscSysErroredSeconds	1.3.6.1.4.1.14817.7.3.1.2.6.13	Counter32	read-only	The number of Errored Seconds for the terminal.
C32 aprisaXEPscSysErrorFreeSeconds	1.3.6.1.4.1.14817.7.3.1.2.6.12	Counter32	read-only	The number of Error Free Seconds for the terminal.
STR aprisaXEPscSysUncorrectableErrorCount	1.3.6.1.4.1.14817.7.3.1.2.6.11	DisplayString	read-only	The terminal uncorrectable error count.
FOU aprisaXEQuadJetAISAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.88.1.8	FourRFAlarmEnabled	read-only	AIS alarm enabled or disabled.
FOU aprisaXEQuadJetAISAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.88.1.7	FourRFAlarmSeverity	read-only	AIS alarm severity.
FOU aprisaXEQuadJetAISAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.88.1.6	FourRFAlarmStatus	read-only	AIS alarm status.
aprisaXEQuadJetBoardEntry	1.3.6.1.4.1.14817.7.3.1.2.87.1		not-accessible	Quad E1 configuration details.
aprisaXEQuadJetBoardTable	1.3.6.1.4.1.14817.7.3.1.2.87		not-accessible	Table of Quad E1 card specific configuration details.
APR aprisaXEQuadJetBoardTableIndex	1.3.6.1.4.1.14817.7.3.1.2.87.1.1	AprisaXESlotNumber	read-only	Quad E1 board indexed by slot.
FOU aprisaXEQuadJetClockSource	1.3.6.1.4.1.14817.7.3.1.2.90.1.7	FourRFNetworkClockSelect	read-write	Controls whether the port drives the clock soure or not.
I32 aprisaXEQuadJetCRC4AlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.88.1.28	Integer32	read-only	CRC4 Threshold at which alarm clears.
FOU aprisaXEQuadJetCRC4AlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.88.1.26	FourRFAlarmEnabled	read-only	CRC4 alarm enabled or disabled.
FOU aprisaXEQuadJetCRC4AlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.88.1.25	FourRFAlarmSeverity	read-only	CRC4 alarm severity.
FOU aprisaXEQuadJetCRC4AlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.88.1.24	FourRFAlarmStatus	read-only	CRC4 alarm status.
I32 aprisaXEQuadJetCRC4AlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.88.1.27	Integer32	read-only	CRC4 Threshold value for counter to alarm at.
aprisaXEQuadJetIFConfigEntry	1.3.6.1.4.1.14817.7.3.1.2.90.1		not-accessible	Quad JET config data.
APR aprisaXEQuadJetIFConfigPortIndex	1.3.6.1.4.1.14817.7.3.1.2.90.1.2	AprisaXEPortNumber	read-only	Index to the port table based on port number.
APR aprisaXEQuadJetIFConfigSlotIndex	1.3.6.1.4.1.14817.7.3.1.2.90.1.1	AprisaXESlotNumber	read-only	Index to the port table based on port number.
aprisaXEQuadJetIFConfigTable	1.3.6.1.4.1.14817.7.3.1.2.90		not-accessible	Switch data table which describes the allocation of user data on to the TDM busses.
APR aprisaXEQuadJetIFConnectionAggregateID	1.3.6.1.4.1.14817.7.3.1.2.91.1.2	AprisaXEConnectionID	read-only	Aggregate ID, 0 if an unframed connection.
aprisaXEQuadJetIFConnectionControl	1.3.6.1.4.1.14817.7.3.1.2.93
INT aprisaXEQuadJetIFConnectionControlCommand	1.3.6.1.4.1.14817.7.3.1.2.93.6	INTEGER	read-write	Command to send to act upon the rows in the QuedJet Interface Connection table.
APR aprisaXEQuadJetIFConnectionControlE1Port	1.3.6.1.4.1.14817.7.3.1.2.93.4	AprisaXEPortNumber	read-write	Port number associated with this connection.
APR aprisaXEQuadJetIFConnectionControlSlot	1.3.6.1.4.1.14817.7.3.1.2.93.3	AprisaXESlotNumber	read-write	Slot number that this card is in.
APR aprisaXEQuadJetIFConnectionControlType	1.3.6.1.4.1.14817.7.3.1.2.93.5	AprisaXEQuadJetConnectionType	read-write	Indicates whether the connection is for data or CAS signalling.
APR aprisaXEQuadJetIFConnectionE1Port	1.3.6.1.4.1.14817.7.3.1.2.91.1.4	AprisaXEPortNumber	read-only	Port number associated with this connection.
APR aprisaXEQuadJetIFConnectionID	1.3.6.1.4.1.14817.7.3.1.2.91.1.1	AprisaXEConnectionID	read-only	Backplane Connection ID.
APR aprisaXEQuadJetIFConnectionSlot	1.3.6.1.4.1.14817.7.3.1.2.91.1.3	AprisaXESlotNumber	read-only	Slot number that this card is in.
aprisaXEQuadJetIFConnectionTable	1.3.6.1.4.1.14817.7.3.1.2.91		not-accessible	Interface connection table which holds all the cross connect information for the E1 card.
aprisaXEQuadJetIFConnectionTableEntry	1.3.6.1.4.1.14817.7.3.1.2.91.1		not-accessible	Quad JET cross connection data.
APR aprisaXEQuadJetIFConnectionType	1.3.6.1.4.1.14817.7.3.1.2.91.1.5	AprisaXEQuadJetConnectionType	read-only	Indicates whether the connection is for data or CAS signalling.
APR aprisaXEQuadJetIFControlAggregateID	1.3.6.1.4.1.14817.7.3.1.2.93.2	AprisaXEConnectionID	read-write	Aggregate Connection ID.
APR aprisaXEQuadJetIFControlConnectionID	1.3.6.1.4.1.14817.7.3.1.2.93.1	AprisaXEConnectionID	read-write	Backplane Connection ID.
APR aprisaXEQuadJetLineEncoding	1.3.6.1.4.1.14817.7.3.1.2.90.1.5	AprisaXEQuadJetLineEncoding	read-write	Controls the line encoding, the default is HDB3 for E1, B8ZS for T1.
APR aprisaXEQuadJetLineRadioLoopback	1.3.6.1.4.1.14817.7.3.1.2.90.1.8	AprisaXEQuadJetLoopbacks	read-write	This indicates the E1 loopback setting on a port; OFF, Line or Radio Facing.
FOU aprisaXEQuadJetLOFAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.88.1.5	FourRFAlarmEnabled	read-only	Red alarm enabled or disabled.
FOU aprisaXEQuadJetLOFAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.88.1.4	FourRFAlarmSeverity	read-only	Red alarm severity.
FOU aprisaXEQuadJetLOFAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.88.1.3	FourRFAlarmStatus	read-only	Red alarm status.
FOU aprisaXEQuadJetLoopback	1.3.6.1.4.1.14817.7.3.1.2.90.1.4	FourRFLoopback	read-write	Controls the traffic loopback on a Quad JET port.
FOU aprisaXEQuadJetLOSAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.88.1.23	FourRFAlarmEnabled	read-only	LOS alarm enabled or disabled.
FOU aprisaXEQuadJetLOSAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.88.1.22	FourRFAlarmSeverity	read-only	LOS alarm severity.
FOU aprisaXEQuadJetLOSAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.88.1.21	FourRFAlarmStatus	read-only	LOS alarm status.
APR aprisaXEQuadJetMultiframeEnable	1.3.6.1.4.1.14817.7.3.1.2.90.1.10	AprisaXEQuadJetMultiframeEnable	read-write	Indicates whether support is enabled for transport of T1 SF and ESF multiframe sync for a port.
APR aprisaXEQuadJetPcmMode	1.3.6.1.4.1.14817.7.3.1.2.90.1.6	AprisaXEPcmMode	read-write	Controls the PCM mode, PCM31 or PCM30C.
aprisaXEQuadJetPortEntry	1.3.6.1.4.1.14817.7.3.1.2.88.1		not-accessible	Quad E1 port alarms.
aprisaXEQuadJetPortTable	1.3.6.1.4.1.14817.7.3.1.2.88		not-accessible	Table based on slot and port of QuadJet cards alarms.
APR aprisaXEQuadJetPortTablePort	1.3.6.1.4.1.14817.7.3.1.2.88.1.2	AprisaXEPortNumber	read-only	Port table index based on port number.
APR aprisaXEQuadJetPortTableSlot	1.3.6.1.4.1.14817.7.3.1.2.88.1.1	AprisaXESlotNumber	read-only	Port table index based on slot number.
FOU aprisaXEQuadJetRAIAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.88.1.11	FourRFAlarmEnabled	read-only	RAI alarm enabled or disabled.
FOU aprisaXEQuadJetRAIAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.88.1.10	FourRFAlarmSeverity	read-only	RAI alarm severity.
FOU aprisaXEQuadJetRAIAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.88.1.9	FourRFAlarmStatus	read-only	RAI alarm status.
FOU aprisaXEQuadJetRMAIAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.88.1.14	FourRFAlarmEnabled	read-only	RMAI alarm enabled or disabled.
FOU aprisaXEQuadJetRMAIAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.88.1.13	FourRFAlarmSeverity	read-only	RMAI alarm severity.
FOU aprisaXEQuadJetRMAIAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.88.1.12	FourRFAlarmStatus	read-only	RMAI alarm status.
APR aprisaXEQuadJetTrafficType	1.3.6.1.4.1.14817.7.3.1.2.90.1.3	AprisaXEQuadJetTrafficType	read-write	Controls the traffic type on a Quad JET port.
FOU aprisaXEQuadJetTS16AISAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.88.1.17	FourRFAlarmEnabled	read-only	TS16 AIS alarm enabled or disabled.
FOU aprisaXEQuadJetTS16AISAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.88.1.16	FourRFAlarmSeverity	read-only	TS16 AIS alarm severity.
FOU aprisaXEQuadJetTS16AISAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.88.1.15	FourRFAlarmStatus	read-only	TS16 AIS alarm status.
FOU aprisaXEQuadJetTS16LOSAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.88.1.20	FourRFAlarmEnabled	read-only	TS16 LOS alarm enabled or disabled.
FOU aprisaXEQuadJetTS16LOSAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.88.1.19	FourRFAlarmSeverity	read-only	TS16 LOS alarm severity.
FOU aprisaXEQuadJetTS16LOSAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.88.1.18	FourRFAlarmStatus	read-only	TS16 LOS alarm status.
APR aprisaXEQuadJetTxWaveFormShaper	1.3.6.1.4.1.14817.7.3.1.2.90.1.9	AprisaXEQuadJetWaveFormShapers	read-write	This indicates the T1 Tx Waveform Shaper for a port; 0~133 ft, 133~266 ft, 266~399 ft, 399~533 ft, 533~655 ft.
aprisaXEReceiver	1.3.6.1.4.1.14817.7.3.1.2.51
FOU aprisaXEReceiver12VPowerStatus	1.3.6.1.4.1.14817.7.3.1.2.51.4	FourRFAlarmStatus	read-only	The status of the Receiver 12V power supply.
APR aprisaXEReceiver3V3Supply	1.3.6.1.4.1.14817.7.3.1.2.51.14	AprisaXEAdcVoltage	read-only	The 3.3V supply rail value, this should only be accessible in engineering mode.
APR aprisaXEReceiver5VSupply	1.3.6.1.4.1.14817.7.3.1.2.51.11	AprisaXEAdcVoltage	read-only	The 5V supply rail value, this should only be accessible in engineering mode.
APR aprisaXEReceiver9VSupply	1.3.6.1.4.1.14817.7.3.1.2.51.10	AprisaXEAdcVoltage	read-only	The 9V supply rail value, this should only be accessible in engineering mode.
APR aprisaXEReceiverADCChEight	1.3.6.1.4.1.14817.7.3.1.2.51.29	AprisaXEAdcVoltage	read-only	The RX adc ch eight voltage.
APR aprisaXEReceiverADCChFive	1.3.6.1.4.1.14817.7.3.1.2.51.26	AprisaXEAdcVoltage	read-only	The RX adc ch five voltage.
APR aprisaXEReceiverADCChFour	1.3.6.1.4.1.14817.7.3.1.2.51.25	AprisaXEAdcVoltage	read-only	The RX adc ch four voltage.
APR aprisaXEReceiverADCChNine	1.3.6.1.4.1.14817.7.3.1.2.51.30	AprisaXEAdcVoltage	read-only	The RX adc ch nine voltage.
APR aprisaXEReceiverADCChOne	1.3.6.1.4.1.14817.7.3.1.2.51.22	AprisaXEAdcVoltage	read-only	The RX adc ch one voltage.
APR aprisaXEReceiverADCChSeven	1.3.6.1.4.1.14817.7.3.1.2.51.28	AprisaXEAdcVoltage	read-only	The RX adc ch seven voltage.
APR aprisaXEReceiverADCChSix	1.3.6.1.4.1.14817.7.3.1.2.51.27	AprisaXEAdcVoltage	read-only	The RX adc ch six voltage.
APR aprisaXEReceiverADCChTen	1.3.6.1.4.1.14817.7.3.1.2.51.31	AprisaXEAdcVoltage	read-only	The RX adc ch ten voltage.
APR aprisaXEReceiverADCChThree	1.3.6.1.4.1.14817.7.3.1.2.51.24	AprisaXEAdcVoltage	read-only	The RX adc ch three voltage.
APR aprisaXEReceiverADCChTwo	1.3.6.1.4.1.14817.7.3.1.2.51.23	AprisaXEAdcVoltage	read-only	The RX adc ch two voltage.
APR aprisaXEReceiverADCChZero	1.3.6.1.4.1.14817.7.3.1.2.51.21	AprisaXEAdcVoltage	read-only	The RX adc ch zero voltage.
aprisaXEReceiverAlarms	1.3.6.1.4.1.14817.7.3.1.2.86.6
APR aprisaXEReceiverCharacterisationDataStatus	1.3.6.1.4.1.14817.7.3.1.2.51.16	AprisaXEDataStatus	read-only	The status of the receiver characterisation data.
INT aprisaXEReceiverCommand	1.3.6.1.4.1.14817.7.3.1.2.51.2	INTEGER	read-write	Commands used to control the receiver, currently the receiver can be switched on and off and the loopback option switched on and off.
APR aprisaXEReceiverDacTest	1.3.6.1.4.1.14817.7.3.1.2.51.15	AprisaXEAdcVoltage	read-only	The DacTest value, this should only be accessible in engineering mode.
FOU aprisaXEReceiverFrequency	1.3.6.1.4.1.14817.7.3.1.2.51.5	FourRFFrequency	read-write	The terminal transmit frequency in MHz. The possible bands are: 330 to 400 MHz (300 MHz) 400 to 470 MHz (400 MHz) 1350 to 1550 MHz (1400 MHz) The frequency value should be supplied in Hz.
APR aprisaXEReceiverMibDataStatus	1.3.6.1.4.1.14817.7.3.1.2.51.20	AprisaXEDataStatus	read-only	The status of the receiver MIB data.
APR aprisaXEReceiverModemAGC	1.3.6.1.4.1.14817.7.3.1.2.51.12	AprisaXEAdcVoltage	read-only	The modem AGC, this should only be accessible in engineering mode.
APR aprisaXEReceiverNeg1V5Supply	1.3.6.1.4.1.14817.7.3.1.2.51.13	AprisaXEAdcVoltage	read-only	The -1.5V supply rail value, this should only be accessible in engineering mode.
STR aprisaXEReceiverOperationalDataVersion	1.3.6.1.4.1.14817.7.3.1.2.51.37	DisplayString	read-only	The version of the operational data of the receiver.
FOU aprisaXEReceiverRfLoopback	1.3.6.1.4.1.14817.7.3.1.2.51.18	FourRFLoopback	read-write	Enables and disabled RF loopback.
U32 aprisaXEReceiverRfLoopbackTimeout	1.3.6.1.4.1.14817.7.3.1.2.51.19	Unsigned32	read-write	The number of seconds after which RF loopback should timeout.
FOU aprisaXEReceiverRSSI	1.3.6.1.4.1.14817.7.3.1.2.51.6	FourRFRSSI	read-only	The characterised RSSI Voltage.
I32 aprisaXEReceiverRSSIThres16QAMLowerOn	1.3.6.1.4.1.14817.7.3.1.2.51.33	Integer32	read-write	The 16QAM Lower ON RSSI Threshold.
I32 aprisaXEReceiverRSSIThres32QAMLowerOn	1.3.6.1.4.1.14817.7.3.1.2.51.34	Integer32	read-write	The 32QAM Lower ON RSSI Threshold.
I32 aprisaXEReceiverRSSIThres64QAMLowerOn	1.3.6.1.4.1.14817.7.3.1.2.51.35	Integer32	read-write	The 64QAM Lower ON RSSI Threshold.
I32 aprisaXEReceiverRSSIThresQPSKLowerOn	1.3.6.1.4.1.14817.7.3.1.2.51.32	Integer32	read-write	The QPSK Lower ON RSSI Threshold.
FOU aprisaXEReceiverSerialNumber	1.3.6.1.4.1.14817.7.3.1.2.51.17	FourRFSerialNumber	read-only	The unique module serial number for the receiver.
INT aprisaXEReceiverStatus	1.3.6.1.4.1.14817.7.3.1.2.51.1	INTEGER	read-only	Status of the receiver, currently the receiver can be On/Off and the loopback can be On/Off.
INT aprisaXEReceiverSwCompatibility	1.3.6.1.4.1.14817.7.3.1.2.51.38	INTEGER	read-only	The receiver software compatibility number.
FOU aprisaXEReceiverSynthesiserStatus	1.3.6.1.4.1.14817.7.3.1.2.51.3	FourRFAlarmStatus	read-only	The status of the receiver synthesiser.
INT aprisaXEReceiverSynthFileVersion	1.3.6.1.4.1.14817.7.3.1.2.51.36	INTEGER	read-only	The version of the Synth File loaded from the filesystem.
FOU aprisaXEReceiverTemperature	1.3.6.1.4.1.14817.7.3.1.2.51.8	FourRFTemperature	read-only	The temperature value, this should only be accessible in engineering mode.
APR aprisaXEReceiverVTune	1.3.6.1.4.1.14817.7.3.1.2.51.9	AprisaXEAdcVoltage	read-only	The voltage output from RX synth value, this should only be accessible in engineering mode.
aprisaXERemoteAlarmGroup	1.3.6.1.4.1.14817.7.3.1.1.21			The AprisaXE remote alarm status group. This group has been replaced by the now mappable external alarm output OIDs aprisaXEExternalAlarmOutputXXXGroup.
aprisaXERemoteAlarms	1.3.6.1.4.1.14817.7.3.1.2.16
aprisaXEReturnLossHiAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.22
I32 aprisaXEReturnLossHiAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.22.5	Integer32	read-write	Indicates the level at which the return loss alarm will be cleared.
FOU aprisaXEReturnLossHiAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.22.3	FourRFAlarmEnabled	read-only	Indicates whether the return loss out of limits alarm is enabled.
FOU aprisaXEReturnLossHiAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.22.2	FourRFAlarmSeverity	read-only	The severity of the return loss out of limits alarm.
aprisaXEReturnLossHiAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.152			The AprisaXE reverse power too high alarm group.
FOU aprisaXEReturnLossHiAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.22.1	FourRFAlarmStatus	read-only	The status of the return loss out of limits alarm.
I32 aprisaXEReturnLossHiAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.22.4	Integer32	read-write	Indicates the level at which the return loss alarm will be set.
aprisaXEReversePowerHiAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.3
I32 aprisaXEReversePowerHiAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.3.5	Integer32	read-only	Indicates the level at which the reverse power alarm will be cleared.
FOU aprisaXEReversePowerHiAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.3.3	FourRFAlarmEnabled	read-only	Indicates whether the reverse power out of limits alarm is enabled.
FOU aprisaXEReversePowerHiAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.3.2	FourRFAlarmSeverity	read-only	The severity of the reverse power out of limits alarm.
aprisaXEReversePowerHiAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.66			The AprisaXE reverse power too high alarm group.
FOU aprisaXEReversePowerHiAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.3.1	FourRFAlarmStatus	read-only	The status of the reverse power out of limits alarm.
I32 aprisaXEReversePowerHiAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.3.4	Integer32	read-only	Indicates the level at which the reverse power alarm will be set.
aprisaXEReversePowerLoAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.4
I32 aprisaXEReversePowerLoAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.4.5	Integer32	read-only	Indicates the level at which the reverse power alarm will be cleared.
FOU aprisaXEReversePowerLoAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.4.3	FourRFAlarmEnabled	read-only	Indicates whether the reverse power out of limits alarm is enabled.
FOU aprisaXEReversePowerLoAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.4.2	FourRFAlarmSeverity	read-only	The severity of the reverse power out of limits alarm.
aprisaXEReversePowerLoAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.71			The AprisaXE reverse power too low alarm group.
FOU aprisaXEReversePowerLoAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.4.1	FourRFAlarmStatus	read-only	The status of the reverse power out of limits alarm.
I32 aprisaXEReversePowerLoAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.4.4	Integer32	read-only	Indicates the level at which the reverse power alarm will be set.
aprisaXERx12VAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.6.3
FOU aprisaXERx12VAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.6.3.3	FourRFAlarmEnabled	read-only	Indicates whether the 12V supply alarm is enabled.
FOU aprisaXERx12VAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.6.3.2	FourRFAlarmSeverity	read-only	The severity of the 12V supply aprisaXERxVtuneLoAlarmalarm.
aprisaXERx12VAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.166			The AprisaXE 12V supply alarm group.
FOU aprisaXERx12VAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.6.3.1	FourRFAlarmStatus	read-only	The status of the 12V supply alarm.
aprisaXERx3V3HiAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.6.4
I32 aprisaXERx3V3HiAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.4.5	Integer32	read-only	Indicates the level at which the 3.3V supply high will be cleared.
FOU aprisaXERx3V3HiAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.6.4.3	FourRFAlarmEnabled	read-only	Indicates whether the 3.3V supply high alarm is enabled.
FOU aprisaXERx3V3HiAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.6.4.2	FourRFAlarmSeverity	read-only	The severity of the 3.3V supply high alarm.
aprisaXERx3V3HiAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.171			The AprisaXE 3.3V supply high alarm group.
FOU aprisaXERx3V3HiAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.6.4.1	FourRFAlarmStatus	read-only	The status of the 3.3V supply high alarm.
I32 aprisaXERx3V3HiAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.4.4	Integer32	read-only	Indicates the level at which the 3.3V supply high alarm will be set.
aprisaXERx3V3LoAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.6.5
I32 aprisaXERx3V3LoAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.5.5	Integer32	read-only	Indicates the level at which the 3.3V supply low will be cleared.
FOU aprisaXERx3V3LoAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.6.5.3	FourRFAlarmEnabled	read-only	Indicates whether the 3.3V supply low alarm is enabled.
FOU aprisaXERx3V3LoAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.6.5.2	FourRFAlarmSeverity	read-only	The severity of the 3.3V supply low alarm.
aprisaXERx3V3LoAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.176			The AprisaXE 3.3V supply low alarm group.
FOU aprisaXERx3V3LoAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.6.5.1	FourRFAlarmStatus	read-only	The status of the 3.3V supply low alarm.
I32 aprisaXERx3V3LoAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.5.4	Integer32	read-only	Indicates the level at which the 3.3V supply low alarm will be set.
aprisaXERx5VHiAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.6.6
I32 aprisaXERx5VHiAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.6.5	Integer32	read-only	Indicates the level at which the 5V supply High will be cleared.
FOU aprisaXERx5VHiAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.6.6.3	FourRFAlarmEnabled	read-only	Indicates whether the 5V supply High alarm is enabled.
FOU aprisaXERx5VHiAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.6.6.2	FourRFAlarmSeverity	read-only	The severity of the 5V supply High alarm.
aprisaXERx5VHiAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.181			The AprisaXE 5V supply High alarm group.
FOU aprisaXERx5VHiAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.6.6.1	FourRFAlarmStatus	read-only	The status of the 5V supply High alarm.
I32 aprisaXERx5VHiAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.6.4	Integer32	read-only	Indicates the level at which the 5V supply High alarm will be set.
aprisaXERx5VLoAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.6.7
I32 aprisaXERx5VLoAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.7.5	Integer32	read-only	Indicates the level at which the 5V supply low will be cleared.
FOU aprisaXERx5VLoAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.6.7.3	FourRFAlarmEnabled	read-only	Indicates whether the 5V supply low alarm is enabled.
FOU aprisaXERx5VLoAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.6.7.2	FourRFAlarmSeverity	read-only	The severity of the 5V supply low alarm.
aprisaXERx5VLoAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.186			The AprisaXE 5V supply low alarm group.
FOU aprisaXERx5VLoAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.6.7.1	FourRFAlarmStatus	read-only	The status of the 5V supply low alarm.
I32 aprisaXERx5VLoAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.7.4	Integer32	read-only	Indicates the level at which the 5V supply low alarm will be set.
aprisaXERx9VHiAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.6.8
I32 aprisaXERx9VHiAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.8.5	Integer32	read-only	Indicates the level at which the 9V supply High will be cleared.
FOU aprisaXERx9VHiAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.6.8.3	FourRFAlarmEnabled	read-only	Indicates whether the 9V supply High alarm is enabled.
FOU aprisaXERx9VHiAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.6.8.2	FourRFAlarmSeverity	read-only	The severity of the 9V supply High alarm.
aprisaXERx9VHiAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.191			The AprisaXE 9V supply High alarm group.
FOU aprisaXERx9VHiAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.6.8.1	FourRFAlarmStatus	read-only	The status of the 9V supply High alarm.
I32 aprisaXERx9VHiAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.8.4	Integer32	read-only	Indicates the level at which the 9V supply High alarm will be set.
aprisaXERx9VLoAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.6.9
I32 aprisaXERx9VLoAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.9.5	Integer32	read-only	Indicates the level at which the 9V supply low will be cleared.
FOU aprisaXERx9VLoAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.6.9.3	FourRFAlarmEnabled	read-only	Indicates whether the 9V supply low alarm is enabled.
FOU aprisaXERx9VLoAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.6.9.2	FourRFAlarmSeverity	read-only	The severity of the 9V supply low alarm.
aprisaXERx9VLoAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.196			The AprisaXE 9V supply low alarm group.
FOU aprisaXERx9VLoAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.6.9.1	FourRFAlarmStatus	read-only	The status of the 9V supply low alarm.
I32 aprisaXERx9VLoAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.9.4	Integer32	read-only	Indicates the level at which the 9V supply low alarm will be set.
aprisaXERxADCChEightHiAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.6.35
I32 aprisaXERxADCChEightHiAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.35.6	Integer32	read-only	Indicates the level at which the receiver ADC Ch Eight voltage too high will be cleared.
FOU aprisaXERxADCChEightHiAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.6.35.4	FourRFAlarmEnabled	read-only	Indicates whether the receiver ADC Ch Eight voltage too high alarm is enabled.
STR aprisaXERxADCChEightHiAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.6.35.1	DisplayString	read-only	The name of the receiver ADC Ch Eight voltage too high alarm.
FOU aprisaXERxADCChEightHiAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.6.35.3	FourRFAlarmSeverity	read-only	The severity of the receiver ADC Ch Eight voltage too high alarm.
aprisaXERxADCChEightHiAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.291			The aprisaXERx receiver ADC Ch Eight voltage too high alarm group.
FOU aprisaXERxADCChEightHiAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.6.35.2	FourRFAlarmStatus	read-only	The status of the receiver ADC Ch Eight voltage too high alarm.
I32 aprisaXERxADCChEightHiAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.35.5	Integer32	read-only	Indicates the level at which the receiver ADC Ch Eight voltage too high alarm will be set.
aprisaXERxADCChEightLoAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.6.36
I32 aprisaXERxADCChEightLoAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.36.6	Integer32	read-only	Indicates the level at wLoch the receiver ADC Ch Eight voltage too low will be cleared.
FOU aprisaXERxADCChEightLoAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.6.36.4	FourRFAlarmEnabled	read-only	Indicates whether the receiver ADC Ch Eight voltage too low alarm is enabled.
STR aprisaXERxADCChEightLoAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.6.36.1	DisplayString	read-only	The name of the receiver ADC Ch Eight voltage too low alarm.
FOU aprisaXERxADCChEightLoAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.6.36.3	FourRFAlarmSeverity	read-only	The severity of the receiver ADC Ch Eight voltage too low alarm.
aprisaXERxADCChEightLoAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.292			The aprisaXERx receiver ADC Ch Eight voltage too High alarm group.
FOU aprisaXERxADCChEightLoAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.6.36.2	FourRFAlarmStatus	read-only	The status of the receiver ADC Ch Eight voltage too low alarm.
I32 aprisaXERxADCChEightLoAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.36.5	Integer32	read-only	Indicates the level at wLoch the receiver ADC Ch Eight voltage too low alarm will be set.
aprisaXERxADCChFiveHiAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.6.29
I32 aprisaXERxADCChFiveHiAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.29.6	Integer32	read-only	Indicates the level at which the receiver ADC Ch Five voltage too high will be cleared.
FOU aprisaXERxADCChFiveHiAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.6.29.4	FourRFAlarmEnabled	read-only	Indicates whether the receiver ADC Ch Five voltage too high alarm is enabled.
STR aprisaXERxADCChFiveHiAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.6.29.1	DisplayString	read-only	The name of the receiver ADC Ch Five voltage too high alarm.
FOU aprisaXERxADCChFiveHiAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.6.29.3	FourRFAlarmSeverity	read-only	The severity of the receiver ADC Ch Five voltage too high alarm.
aprisaXERxADCChFiveHiAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.285			The aprisaXERx receiver ADC Ch Five voltage too high alarm group.
FOU aprisaXERxADCChFiveHiAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.6.29.2	FourRFAlarmStatus	read-only	The status of the receiver ADC Ch Five voltage too high alarm.
I32 aprisaXERxADCChFiveHiAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.29.5	Integer32	read-only	Indicates the level at which the receiver ADC Ch Five voltage too high alarm will be set.
aprisaXERxADCChFiveLoAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.6.30
I32 aprisaXERxADCChFiveLoAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.30.6	Integer32	read-only	Indicates the level at wLoch the receiver ADC Ch Five voltage too low will be cleared.
FOU aprisaXERxADCChFiveLoAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.6.30.4	FourRFAlarmEnabled	read-only	Indicates whether the receiver ADC Ch Five voltage too low alarm is enabled.
STR aprisaXERxADCChFiveLoAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.6.30.1	DisplayString	read-only	The name of the receiver ADC Ch Five voltage too low alarm.
FOU aprisaXERxADCChFiveLoAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.6.30.3	FourRFAlarmSeverity	read-only	The severity of the receiver ADC Ch Five voltage too low alarm.
aprisaXERxADCChFiveLoAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.286			The aprisaXERx receiver ADC Ch Five voltage too High alarm group.
FOU aprisaXERxADCChFiveLoAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.6.30.2	FourRFAlarmStatus	read-only	The status of the receiver ADC Ch Five voltage too low alarm.
I32 aprisaXERxADCChFiveLoAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.30.5	Integer32	read-only	Indicates the level at wLoch the receiver ADC Ch Five voltage too low alarm will be set.
aprisaXERxADCChFourHiAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.6.27
I32 aprisaXERxADCChFourHiAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.27.6	Integer32	read-only	Indicates the level at which the receiver ADC Ch Four voltage too high will be cleared.
FOU aprisaXERxADCChFourHiAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.6.27.4	FourRFAlarmEnabled	read-only	Indicates whether the receiver ADC Ch Four voltage too high alarm is enabled.
STR aprisaXERxADCChFourHiAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.6.27.1	DisplayString	read-only	The name of the receiver ADC Ch Four voltage too high alarm.
FOU aprisaXERxADCChFourHiAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.6.27.3	FourRFAlarmSeverity	read-only	The severity of the receiver ADC Ch Four voltage too high alarm.
aprisaXERxADCChFourHiAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.283			The aprisaXERx receiver ADC Ch Four voltage too high alarm group.
FOU aprisaXERxADCChFourHiAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.6.27.2	FourRFAlarmStatus	read-only	The status of the receiver ADC Ch Four voltage too high alarm.
I32 aprisaXERxADCChFourHiAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.27.5	Integer32	read-only	Indicates the level at which the receiver ADC Ch Four voltage too high alarm will be set.
aprisaXERxADCChFourLoAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.6.28
I32 aprisaXERxADCChFourLoAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.28.6	Integer32	read-only	Indicates the level at wLoch the receiver ADC Ch Four voltage too low will be cleared.
FOU aprisaXERxADCChFourLoAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.6.28.4	FourRFAlarmEnabled	read-only	Indicates whether the receiver ADC Ch Four voltage too low alarm is enabled.
STR aprisaXERxADCChFourLoAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.6.28.1	DisplayString	read-only	The name of the receiver ADC Ch Four voltage too low alarm.
FOU aprisaXERxADCChFourLoAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.6.28.3	FourRFAlarmSeverity	read-only	The severity of the receiver ADC Ch Four voltage too low alarm.
aprisaXERxADCChFourLoAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.284			The aprisaXERx receiver ADC Ch Four voltage too High alarm group.
FOU aprisaXERxADCChFourLoAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.6.28.2	FourRFAlarmStatus	read-only	The status of the receiver ADC Ch Four voltage too low alarm.
I32 aprisaXERxADCChFourLoAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.28.5	Integer32	read-only	Indicates the level at wLoch the receiver ADC Ch Four voltage too low alarm will be set.
aprisaXERxADCChNineHiAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.6.37
I32 aprisaXERxADCChNineHiAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.37.6	Integer32	read-only	Indicates the level at which the receiver ADC Ch Nine voltage too high will be cleared.
FOU aprisaXERxADCChNineHiAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.6.37.4	FourRFAlarmEnabled	read-only	Indicates whether the receiver ADC Ch Nine voltage too high alarm is enabled.
STR aprisaXERxADCChNineHiAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.6.37.1	DisplayString	read-only	The name of the receiver ADC Ch Nine voltage too high alarm.
FOU aprisaXERxADCChNineHiAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.6.37.3	FourRFAlarmSeverity	read-only	The severity of the receiver ADC Ch Nine voltage too high alarm.
aprisaXERxADCChNineHiAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.293			The aprisaXERx receiver ADC Ch Nine voltage too high alarm group.
FOU aprisaXERxADCChNineHiAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.6.37.2	FourRFAlarmStatus	read-only	The status of the receiver ADC Ch Nine voltage too high alarm.
I32 aprisaXERxADCChNineHiAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.37.5	Integer32	read-only	Indicates the level at which the receiver ADC Ch Nine voltage too high alarm will be set.
aprisaXERxADCChNineLoAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.6.38
I32 aprisaXERxADCChNineLoAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.38.6	Integer32	read-only	Indicates the level at wLoch the receiver ADC Ch Nine voltage too low will be cleared.
FOU aprisaXERxADCChNineLoAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.6.38.4	FourRFAlarmEnabled	read-only	Indicates whether the receiver ADC Ch Nine voltage too low alarm is enabled.
STR aprisaXERxADCChNineLoAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.6.38.1	DisplayString	read-only	The name of the receiver ADC Ch Nine voltage too low alarm.
FOU aprisaXERxADCChNineLoAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.6.38.3	FourRFAlarmSeverity	read-only	The severity of the receiver ADC Ch Nine voltage too low alarm.
aprisaXERxADCChNineLoAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.294			The aprisaXERx receiver ADC Ch Nine voltage too High alarm group.
FOU aprisaXERxADCChNineLoAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.6.38.2	FourRFAlarmStatus	read-only	The status of the receiver ADC Ch Nine voltage too low alarm.
I32 aprisaXERxADCChNineLoAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.38.5	Integer32	read-only	Indicates the level at wLoch the receiver ADC Ch Nine voltage too low alarm will be set.
aprisaXERxADCChOneHiAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.6.21
I32 aprisaXERxADCChOneHiAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.21.6	Integer32	read-only	Indicates the level at which the receiver ADC Ch One voltage too high will be cleared.
FOU aprisaXERxADCChOneHiAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.6.21.4	FourRFAlarmEnabled	read-only	Indicates whether the receiver ADC Ch One voltage too high alarm is enabled.
STR aprisaXERxADCChOneHiAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.6.21.1	DisplayString	read-only	The name of the receiver ADC Ch One voltage too high alarm.
FOU aprisaXERxADCChOneHiAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.6.21.3	FourRFAlarmSeverity	read-only	The severity of the receiver ADC Ch One voltage too high alarm.
aprisaXERxADCChOneHiAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.277			The aprisaXERx receiver ADC Ch One voltage too high alarm group.
FOU aprisaXERxADCChOneHiAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.6.21.2	FourRFAlarmStatus	read-only	The status of the receiver ADC Ch One voltage too high alarm.
I32 aprisaXERxADCChOneHiAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.21.5	Integer32	read-only	Indicates the level at which the receiver ADC Ch One voltage too high alarm will be set.
aprisaXERxADCChOneLoAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.6.22
I32 aprisaXERxADCChOneLoAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.22.6	Integer32	read-only	Indicates the level at wLoch the receiver ADC Ch One voltage too low will be cleared.
FOU aprisaXERxADCChOneLoAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.6.22.4	FourRFAlarmEnabled	read-only	Indicates whether the receiver ADC Ch One voltage too low alarm is enabled.
STR aprisaXERxADCChOneLoAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.6.22.1	DisplayString	read-only	The name of the receiver ADC Ch One voltage too low alarm.
FOU aprisaXERxADCChOneLoAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.6.22.3	FourRFAlarmSeverity	read-only	The severity of the receiver ADC Ch One voltage too low alarm.
aprisaXERxADCChOneLoAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.278			The aprisaXERx receiver ADC Ch One voltage too High alarm group.
FOU aprisaXERxADCChOneLoAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.6.22.2	FourRFAlarmStatus	read-only	The status of the receiver ADC Ch One voltage too low alarm.
I32 aprisaXERxADCChOneLoAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.22.5	Integer32	read-only	Indicates the level at wLoch the receiver ADC Ch One voltage too low alarm will be set.
aprisaXERxADCChSevenHiAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.6.33
I32 aprisaXERxADCChSevenHiAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.33.6	Integer32	read-only	Indicates the level at which the receiver ADC Ch Seven voltage too high will be cleared.
FOU aprisaXERxADCChSevenHiAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.6.33.4	FourRFAlarmEnabled	read-only	Indicates whether the receiver ADC Ch Seven voltage too high alarm is enabled.
STR aprisaXERxADCChSevenHiAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.6.33.1	DisplayString	read-only	The name of the receiver ADC Ch Seven voltage too high alarm.
FOU aprisaXERxADCChSevenHiAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.6.33.3	FourRFAlarmSeverity	read-only	The severity of the receiver ADC Ch Seven voltage too high alarm.
aprisaXERxADCChSevenHiAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.289			The aprisaXERx receiver ADC Ch Seven voltage too high alarm group.
FOU aprisaXERxADCChSevenHiAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.6.33.2	FourRFAlarmStatus	read-only	The status of the receiver ADC Ch Seven voltage too high alarm.
I32 aprisaXERxADCChSevenHiAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.33.5	Integer32	read-only	Indicates the level at which the receiver ADC Ch Seven voltage too high alarm will be set.
aprisaXERxADCChSevenLoAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.6.34
I32 aprisaXERxADCChSevenLoAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.34.6	Integer32	read-only	Indicates the level at wLoch the receiver ADC Ch Seven voltage too low will be cleared.
FOU aprisaXERxADCChSevenLoAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.6.34.4	FourRFAlarmEnabled	read-only	Indicates whether the receiver ADC Ch Seven voltage too low alarm is enabled.
STR aprisaXERxADCChSevenLoAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.6.34.1	DisplayString	read-only	The name of the receiver ADC Ch Seven voltage too low alarm.
FOU aprisaXERxADCChSevenLoAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.6.34.3	FourRFAlarmSeverity	read-only	The severity of the receiver ADC Ch Seven voltage too low alarm.
aprisaXERxADCChSevenLoAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.290			The aprisaXERx receiver ADC Ch Seven voltage too High alarm group.
FOU aprisaXERxADCChSevenLoAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.6.34.2	FourRFAlarmStatus	read-only	The status of the receiver ADC Ch Seven voltage too low alarm.
I32 aprisaXERxADCChSevenLoAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.34.5	Integer32	read-only	Indicates the level at wLoch the receiver ADC Ch Seven voltage too low alarm will be set.
aprisaXERxADCChSixHiAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.6.31
I32 aprisaXERxADCChSixHiAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.31.6	Integer32	read-only	Indicates the level at which the receiver ADC Ch Six voltage too high will be cleared.
FOU aprisaXERxADCChSixHiAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.6.31.4	FourRFAlarmEnabled	read-only	Indicates whether the receiver ADC Ch Six voltage too high alarm is enabled.
STR aprisaXERxADCChSixHiAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.6.31.1	DisplayString	read-only	The name of the receiver ADC Ch Six voltage too high alarm.
FOU aprisaXERxADCChSixHiAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.6.31.3	FourRFAlarmSeverity	read-only	The severity of the receiver ADC Ch Six voltage too high alarm.
aprisaXERxADCChSixHiAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.287			The aprisaXERx receiver ADC Ch Six voltage too high alarm group.
FOU aprisaXERxADCChSixHiAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.6.31.2	FourRFAlarmStatus	read-only	The status of the receiver ADC Ch Six voltage too high alarm.
I32 aprisaXERxADCChSixHiAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.31.5	Integer32	read-only	Indicates the level at which the receiver ADC Ch Six voltage too high alarm will be set.
aprisaXERxADCChSixLoAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.6.32
I32 aprisaXERxADCChSixLoAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.32.6	Integer32	read-only	Indicates the level at wLoch the receiver ADC Ch Six voltage too low will be cleared.
FOU aprisaXERxADCChSixLoAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.6.32.4	FourRFAlarmEnabled	read-only	Indicates whether the receiver ADC Ch Six voltage too low alarm is enabled.
STR aprisaXERxADCChSixLoAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.6.32.1	DisplayString	read-only	The name of the receiver ADC Ch Six voltage too low alarm.
FOU aprisaXERxADCChSixLoAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.6.32.3	FourRFAlarmSeverity	read-only	The severity of the receiver ADC Ch Six voltage too low alarm.
aprisaXERxADCChSixLoAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.288			The aprisaXERx receiver ADC Ch Six voltage too High alarm group.
FOU aprisaXERxADCChSixLoAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.6.32.2	FourRFAlarmStatus	read-only	The status of the receiver ADC Ch Six voltage too low alarm.
I32 aprisaXERxADCChSixLoAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.32.5	Integer32	read-only	Indicates the level at wLoch the receiver ADC Ch Six voltage too low alarm will be set.
aprisaXERxADCChTenHiAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.6.39
I32 aprisaXERxADCChTenHiAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.39.6	Integer32	read-only	Indicates the level at which the receiver ADC Ch Ten voltage too high will be cleared.
FOU aprisaXERxADCChTenHiAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.6.39.4	FourRFAlarmEnabled	read-only	Indicates whether the receiver ADC Ch Ten voltage too high alarm is enabled.
STR aprisaXERxADCChTenHiAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.6.39.1	DisplayString	read-only	The name of the receiver ADC Ch Ten voltage too high alarm.
FOU aprisaXERxADCChTenHiAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.6.39.3	FourRFAlarmSeverity	read-only	The severity of the receiver ADC Ch Ten voltage too high alarm.
aprisaXERxADCChTenHiAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.295			The aprisaXERx receiver ADC Ch Ten voltage too high alarm group.
FOU aprisaXERxADCChTenHiAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.6.39.2	FourRFAlarmStatus	read-only	The status of the receiver ADC Ch Ten voltage too high alarm.
I32 aprisaXERxADCChTenHiAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.39.5	Integer32	read-only	Indicates the level at which the receiver ADC Ch Ten voltage too high alarm will be set.
aprisaXERxADCChTenLoAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.6.40
I32 aprisaXERxADCChTenLoAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.40.6	Integer32	read-only	Indicates the level at wLoch the receiver ADC Ch Ten voltage too low will be cleared.
FOU aprisaXERxADCChTenLoAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.6.40.4	FourRFAlarmEnabled	read-only	Indicates whether the receiver ADC Ch Ten voltage too low alarm is enabled.
STR aprisaXERxADCChTenLoAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.6.40.1	DisplayString	read-only	The name of the receiver ADC Ch Ten voltage too low alarm.
FOU aprisaXERxADCChTenLoAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.6.40.3	FourRFAlarmSeverity	read-only	The severity of the receiver ADC Ch Ten voltage too low alarm.
aprisaXERxADCChTenLoAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.296			The aprisaXERx receiver ADC Ch Ten voltage too High alarm group.
FOU aprisaXERxADCChTenLoAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.6.40.2	FourRFAlarmStatus	read-only	The status of the receiver ADC Ch Ten voltage too low alarm.
I32 aprisaXERxADCChTenLoAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.40.5	Integer32	read-only	Indicates the level at wLoch the receiver ADC Ch Ten voltage too low alarm will be set.
aprisaXERxADCChThreeHiAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.6.25
I32 aprisaXERxADCChThreeHiAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.25.6	Integer32	read-only	Indicates the level at which the receiver ADC Ch Three voltage too high will be cleared.
FOU aprisaXERxADCChThreeHiAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.6.25.4	FourRFAlarmEnabled	read-only	Indicates whether the receiver ADC Ch Three voltage too high alarm is enabled.
STR aprisaXERxADCChThreeHiAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.6.25.1	DisplayString	read-only	The name of the receiver ADC Ch Three voltage too high alarm.
FOU aprisaXERxADCChThreeHiAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.6.25.3	FourRFAlarmSeverity	read-only	The severity of the receiver ADC Ch Three voltage too high alarm.
aprisaXERxADCChThreeHiAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.281			The aprisaXERx receiver ADC Ch Three voltage too high alarm group.
FOU aprisaXERxADCChThreeHiAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.6.25.2	FourRFAlarmStatus	read-only	The status of the receiver ADC Ch Three voltage too high alarm.
I32 aprisaXERxADCChThreeHiAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.25.5	Integer32	read-only	Indicates the level at which the receiver ADC Ch Three voltage too high alarm will be set.
aprisaXERxADCChThreeLoAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.6.26
I32 aprisaXERxADCChThreeLoAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.26.6	Integer32	read-only	Indicates the level at wLoch the receiver ADC Ch Three voltage too low will be cleared.
FOU aprisaXERxADCChThreeLoAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.6.26.4	FourRFAlarmEnabled	read-only	Indicates whether the receiver ADC Ch Three voltage too low alarm is enabled.
STR aprisaXERxADCChThreeLoAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.6.26.1	DisplayString	read-only	The name of the receiver ADC Ch Three voltage too low alarm.
FOU aprisaXERxADCChThreeLoAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.6.26.3	FourRFAlarmSeverity	read-only	The severity of the receiver ADC Ch Three voltage too low alarm.
aprisaXERxADCChThreeLoAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.282			The aprisaXERx receiver ADC Ch Three voltage too High alarm group.
FOU aprisaXERxADCChThreeLoAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.6.26.2	FourRFAlarmStatus	read-only	The status of the receiver ADC Ch Three voltage too low alarm.
I32 aprisaXERxADCChThreeLoAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.26.5	Integer32	read-only	Indicates the level at wLoch the receiver ADC Ch Three voltage too low alarm will be set.
aprisaXERxADCChTwoHiAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.6.23
I32 aprisaXERxADCChTwoHiAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.23.6	Integer32	read-only	Indicates the level at which the receiver ADC Ch Two voltage too high will be cleared.
FOU aprisaXERxADCChTwoHiAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.6.23.4	FourRFAlarmEnabled	read-only	Indicates whether the receiver ADC Ch Two voltage too high alarm is enabled.
STR aprisaXERxADCChTwoHiAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.6.23.1	DisplayString	read-only	The name of the receiver ADC Ch Two voltage too high alarm.
FOU aprisaXERxADCChTwoHiAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.6.23.3	FourRFAlarmSeverity	read-only	The severity of the receiver ADC Ch Two voltage too high alarm.
aprisaXERxADCChTwoHiAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.279			The aprisaXERx receiver ADC Ch Two voltage too high alarm group.
FOU aprisaXERxADCChTwoHiAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.6.23.2	FourRFAlarmStatus	read-only	The status of the receiver ADC Ch Two voltage too high alarm.
I32 aprisaXERxADCChTwoHiAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.23.5	Integer32	read-only	Indicates the level at which the receiver ADC Ch Two voltage too high alarm will be set.
aprisaXERxADCChTwoLoAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.6.24
I32 aprisaXERxADCChTwoLoAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.24.6	Integer32	read-only	Indicates the level at wLoch the receiver ADC Ch Two voltage too low will be cleared.
FOU aprisaXERxADCChTwoLoAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.6.24.4	FourRFAlarmEnabled	read-only	Indicates whether the receiver ADC Ch Two voltage too low alarm is enabled.
STR aprisaXERxADCChTwoLoAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.6.24.1	DisplayString	read-only	The name of the receiver ADC Ch Two voltage too low alarm.
FOU aprisaXERxADCChTwoLoAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.6.24.3	FourRFAlarmSeverity	read-only	The severity of the receiver ADC Ch Two voltage too low alarm.
aprisaXERxADCChTwoLoAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.280			The aprisaXERx receiver ADC Ch Two voltage too High alarm group.
FOU aprisaXERxADCChTwoLoAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.6.24.2	FourRFAlarmStatus	read-only	The status of the receiver ADC Ch Two voltage too low alarm.
I32 aprisaXERxADCChTwoLoAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.24.5	Integer32	read-only	Indicates the level at wLoch the receiver ADC Ch Two voltage too low alarm will be set.
aprisaXERxADCChZeroHiAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.6.19
I32 aprisaXERxADCChZeroHiAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.19.6	Integer32	read-only	Indicates the level at which the receiver ADC Ch Zero voltage too high will be cleared.
FOU aprisaXERxADCChZeroHiAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.6.19.4	FourRFAlarmEnabled	read-only	Indicates whether the receiver ADC Ch Zero voltage too high alarm is enabled.
STR aprisaXERxADCChZeroHiAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.6.19.1	DisplayString	read-only	The name of the receiver ADC Ch Zero voltage too high alarm.
FOU aprisaXERxADCChZeroHiAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.6.19.3	FourRFAlarmSeverity	read-only	The severity of the receiver ADC Ch Zero voltage too high alarm.
aprisaXERxADCChZeroHiAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.275			The aprisaXERx receiver ADC Ch Zero voltage too high alarm group.
FOU aprisaXERxADCChZeroHiAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.6.19.2	FourRFAlarmStatus	read-only	The status of the receiver ADC Ch Zero voltage too high alarm.
I32 aprisaXERxADCChZeroHiAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.19.5	Integer32	read-only	Indicates the level at which the receiver ADC Ch Zero voltage too high alarm will be set.
aprisaXERxADCChZeroLoAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.6.20
I32 aprisaXERxADCChZeroLoAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.20.6	Integer32	read-only	Indicates the level at wLoch the receiver ADC Ch Zero voltage too low will be cleared.
FOU aprisaXERxADCChZeroLoAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.6.20.4	FourRFAlarmEnabled	read-only	Indicates whether the receiver ADC Ch Zero voltage too low alarm is enabled.
STR aprisaXERxADCChZeroLoAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.6.20.1	DisplayString	read-only	The name of the receiver ADC Ch Zero voltage too low alarm.
FOU aprisaXERxADCChZeroLoAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.6.20.3	FourRFAlarmSeverity	read-only	The severity of the receiver ADC Ch Zero voltage too low alarm.
aprisaXERxADCChZeroLoAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.276			The aprisaXERx receiver ADC Ch Zero voltage too High alarm group.
FOU aprisaXERxADCChZeroLoAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.6.20.2	FourRFAlarmStatus	read-only	The status of the receiver ADC Ch Zero voltage too low alarm.
I32 aprisaXERxADCChZeroLoAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.20.5	Integer32	read-only	Indicates the level at wLoch the receiver ADC Ch Zero voltage too low alarm will be set.
aprisaXERxAgcHiAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.6.12
I32 aprisaXERxAgcHiAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.12.5	Integer32	read-only	Indicates the level at which the AGC high will be cleared.
FOU aprisaXERxAgcHiAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.6.12.3	FourRFAlarmEnabled	read-only	Indicates whether the AGC high alarm is enabled.
FOU aprisaXERxAgcHiAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.6.12.2	FourRFAlarmSeverity	read-only	The severity of the AGC high alarm.
aprisaXERxAgcHiAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.211			The AprisaXE AGC high alarm group.
FOU aprisaXERxAgcHiAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.6.12.1	FourRFAlarmStatus	read-only	The status of the AGC high alarm.
I32 aprisaXERxAgcHiAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.12.4	Integer32	read-only	Indicates the level at which the AGC high alarm will be set.
aprisaXERxAgcLoAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.6.13
I32 aprisaXERxAgcLoAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.13.5	Integer32	read-only	Indicates the level at which the AGC low will be cleared.
FOU aprisaXERxAgcLoAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.6.13.3	FourRFAlarmEnabled	read-only	Indicates whether the AGC low alarm is enabled.
FOU aprisaXERxAgcLoAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.6.13.2	FourRFAlarmSeverity	read-only	The severity of the AGC low alarm.
aprisaXERxAgcLoAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.216			The AprisaXE AGC low alarm group.
FOU aprisaXERxAgcLoAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.6.13.1	FourRFAlarmStatus	read-only	The status of the AGC low alarm.
I32 aprisaXERxAgcLoAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.13.4	Integer32	read-only	Indicates the level at which the AGC low alarm will be set.
aprisaXERxEEAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.6.18
FOU aprisaXERxEEAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.6.18.3	FourRFAlarmEnabled	read-only	Indicates whether the EEPROM alarm is enabled.
FOU aprisaXERxEEAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.6.18.2	FourRFAlarmSeverity	read-only	The severity of the EEPROM alarm.
aprisaXERxEEAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.241			The AprisaXE EEPROM alarm group.
FOU aprisaXERxEEAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.6.18.1	FourRFAlarmStatus	read-only	The status of the EEPROM alarm.
aprisaXERxNeg1V5HiAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.6.10
I32 aprisaXERxNeg1V5HiAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.10.5	Integer32	read-only	Indicates the level at which the Neg 1.5V supply High will be cleared.
FOU aprisaXERxNeg1V5HiAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.6.10.3	FourRFAlarmEnabled	read-only	Indicates whether the Neg 1.5V supply High alarm is enabled.
FOU aprisaXERxNeg1V5HiAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.6.10.2	FourRFAlarmSeverity	read-only	The severity of the Neg 1.5V supply High alarm.
aprisaXERxNeg1V5HiAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.201			The AprisaXE Neg 1.5V supply High alarm group.
FOU aprisaXERxNeg1V5HiAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.6.10.1	FourRFAlarmStatus	read-only	The status of the Neg 1.5V supply High alarm.
I32 aprisaXERxNeg1V5HiAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.10.4	Integer32	read-only	Indicates the level at which the Neg 1.5V supply High alarm will be set.
aprisaXERxNeg1V5LoAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.6.11
I32 aprisaXERxNeg1V5LoAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.11.5	Integer32	read-only	Indicates the level at which the Neg 1.5V supply low will be cleared.
FOU aprisaXERxNeg1V5LoAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.6.11.3	FourRFAlarmEnabled	read-only	Indicates whether the Neg 1.5V supply low alarm is enabled.
FOU aprisaXERxNeg1V5LoAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.6.11.2	FourRFAlarmSeverity	read-only	The severity of the Neg 1.5V supply low alarm.
aprisaXERxNeg1V5LoAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.206			The AprisaXE Neg 1.5V supply low alarm group.
FOU aprisaXERxNeg1V5LoAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.6.11.1	FourRFAlarmStatus	read-only	The status of the Neg 1.5V supply low alarm.
I32 aprisaXERxNeg1V5LoAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.11.4	Integer32	read-only	Indicates the level at which the Neg 1.5V supply low alarm will be set.
C32 aprisaXERxPacketCount	1.3.6.1.4.1.14817.7.3.1.2.6.5	Counter32	read-only	The terminal received ethernet packet count (from link).
C32 aprisaXERxPacketErrorCount	1.3.6.1.4.1.14817.7.3.1.2.6.6	Counter32	read-only	The terminal received ethernet packet error count (from link).
aprisaXERxRssiHiAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.6.14
I32 aprisaXERxRssiHiAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.14.5	Integer32	read-only	Indicates the level at which the RSSI High will be cleared.
FOU aprisaXERxRssiHiAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.6.14.3	FourRFAlarmEnabled	read-only	Indicates whether the RSSI High alarm is enabled.
FOU aprisaXERxRssiHiAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.6.14.2	FourRFAlarmSeverity	read-only	The severity of the RSSI High alarm.
aprisaXERxRssiHiAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.221			The AprisaXE RSSI High alarm group.
FOU aprisaXERxRssiHiAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.6.14.1	FourRFAlarmStatus	read-only	The status of the RSSI High alarm.
I32 aprisaXERxRssiHiAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.14.4	Integer32	read-only	Indicates the level at which the RSSI High alarm will be set.
aprisaXERxRssiLoAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.6.15
I32 aprisaXERxRssiLoAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.15.5	Integer32	read-only	Indicates the level at which the RSSI low will be cleared.
FOU aprisaXERxRssiLoAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.6.15.3	FourRFAlarmEnabled	read-only	Indicates whether the RSSI low alarm is enabled.
FOU aprisaXERxRssiLoAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.6.15.2	FourRFAlarmSeverity	read-only	The severity of the RSSI low alarm.
aprisaXERxRssiLoAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.226			The AprisaXE RSSI low alarm group.
FOU aprisaXERxRssiLoAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.6.15.1	FourRFAlarmStatus	read-only	The status of the RSSI low alarm.
I32 aprisaXERxRssiLoAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.15.4	Integer32	read-only	Indicates the level at which the RSSI low alarm will be set.
aprisaXERxSynthOutOfLockAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.6.1
FOU aprisaXERxSynthOutOfLockAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.6.1.3	FourRFAlarmEnabled	read-only	Indicates whether the Synth out of lock alarm is enabled.
FOU aprisaXERxSynthOutOfLockAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.6.1.2	FourRFAlarmSeverity	read-only	The severity of the Synth out of lock alarm.
aprisaXERxSynthOutOfLockAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.161			The AprisaXE Synth out of lock alarm group.
FOU aprisaXERxSynthOutOfLockAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.6.1.1	FourRFAlarmStatus	read-only	The status of the Synth out of lock alarm.
aprisaXERxVtuneHiAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.6.16
I32 aprisaXERxVtuneHiAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.16.5	Integer32	read-only	Indicates the level at which the Vtune High will be cleared.
FOU aprisaXERxVtuneHiAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.6.16.3	FourRFAlarmEnabled	read-only	Indicates whether the Vtune High alarm is enabled.
FOU aprisaXERxVtuneHiAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.6.16.2	FourRFAlarmSeverity	read-only	The severity of the Vtune High alarm.
aprisaXERxVtuneHiAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.231			The AprisaXE Vtune High alarm group.
FOU aprisaXERxVtuneHiAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.6.16.1	FourRFAlarmStatus	read-only	The status of the Vtune High alarm.
I32 aprisaXERxVtuneHiAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.16.4	Integer32	read-only	Indicates the level at which the Vtune High alarm will be set.
aprisaXERxVtuneLoAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.6.17
I32 aprisaXERxVtuneLoAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.17.5	Integer32	read-only	Indicates the level at which the Vtune low will be cleared.
FOU aprisaXERxVtuneLoAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.6.17.3	FourRFAlarmEnabled	read-only	Indicates whether the Vtune low alarm is enabled.
FOU aprisaXERxVtuneLoAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.6.17.2	FourRFAlarmSeverity	read-only	The severity of the Vtune low alarm.
aprisaXERxVtuneLoAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.236			The AprisaXE Vtune low alarm group.
FOU aprisaXERxVtuneLoAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.6.17.1	FourRFAlarmStatus	read-only	The status of the Vtune low alarm.
I32 aprisaXERxVtuneLoAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.6.17.4	Integer32	read-only	Indicates the level at which the Vtune low alarm will be set.
FOU aprisaXESingleJetAISAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.226.1.5	FourRFAlarmEnabled	read-only	AIS alarm enabled or disabled.
FOU aprisaXESingleJetAISAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.226.1.4	FourRFAlarmSeverity	read-only	AIS alarm severity.
FOU aprisaXESingleJetAISAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.226.1.3	FourRFAlarmStatus	read-only	AIS alarm status.
aprisaXESingleJetBoardEntry	1.3.6.1.4.1.14817.7.3.1.2.225.1		not-accessible	Single E1 configuration details.
aprisaXESingleJetBoardTable	1.3.6.1.4.1.14817.7.3.1.2.225		not-accessible	Table of Single E1 card specific configuration details.
APR aprisaXESingleJetBoardTableIndex	1.3.6.1.4.1.14817.7.3.1.2.225.1.1	AprisaXESlotNumber	read-only	Single E1 board indexed by slot.
FOU aprisaXESingleJetClockSource	1.3.6.1.4.1.14817.7.3.1.2.227.1.7	FourRFNetworkClockSelect	read-write	Controls whether the port drives the clock soure or not.
aprisaXESingleJetIFConfigEntry	1.3.6.1.4.1.14817.7.3.1.2.227.1		not-accessible	Single JET config data.
APR aprisaXESingleJetIFConfigPortIndex	1.3.6.1.4.1.14817.7.3.1.2.227.1.2	AprisaXEPortNumber	read-only	Index to the port table based on port number.
APR aprisaXESingleJetIFConfigSlotIndex	1.3.6.1.4.1.14817.7.3.1.2.227.1.1	AprisaXESlotNumber	read-only	Index to the port table based on port number.
aprisaXESingleJetIFConfigTable	1.3.6.1.4.1.14817.7.3.1.2.227		not-accessible	Switch data table which describes the allocation of user data on to the TDM busses.
APR aprisaXESingleJetLineEncoding	1.3.6.1.4.1.14817.7.3.1.2.227.1.5	AprisaXEQuadJetLineEncoding	read-write	Controls the line encoding, the default is HDB3 for E1, B8ZS for T1.
APR aprisaXESingleJetLineRadioLoopback	1.3.6.1.4.1.14817.7.3.1.2.227.1.8	AprisaXEQuadJetLoopbacks	read-write	This indicates the E1 loopback setting on a port; OFF, Line or Radio Facing.
FOU aprisaXESingleJetLoopback	1.3.6.1.4.1.14817.7.3.1.2.227.1.4	FourRFLoopback	read-write	Controls the traffic loopback on a Single JET port.
FOU aprisaXESingleJetLOSAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.226.1.8	FourRFAlarmEnabled	read-only	LOS alarm enabled or disabled.
FOU aprisaXESingleJetLOSAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.226.1.7	FourRFAlarmSeverity	read-only	LOS alarm severity.
FOU aprisaXESingleJetLOSAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.226.1.6	FourRFAlarmStatus	read-only	LOS alarm status.
APR aprisaXESingleJetPcmMode	1.3.6.1.4.1.14817.7.3.1.2.227.1.6	AprisaXEPcmMode	read-write	Controls the PCM mode, PCM31 or PCM30C.
aprisaXESingleJetPortEntry	1.3.6.1.4.1.14817.7.3.1.2.226.1		not-accessible	Single E1 port alarms.
aprisaXESingleJetPortTable	1.3.6.1.4.1.14817.7.3.1.2.226		not-accessible	Table based on slot and port of SingleJet cards alarms.
APR aprisaXESingleJetPortTablePort	1.3.6.1.4.1.14817.7.3.1.2.226.1.2	AprisaXEPortNumber	read-only	Port table index based on port number.
APR aprisaXESingleJetPortTableSlot	1.3.6.1.4.1.14817.7.3.1.2.226.1.1	AprisaXESlotNumber	read-only	Port table index based on slot number.
APR aprisaXESingleJetTrafficType	1.3.6.1.4.1.14817.7.3.1.2.227.1.3	AprisaXEQuadJetTrafficType	read-write	Controls the traffic type on a Single JET port.
APR aprisaXESingleJetTxWaveFormShaper	1.3.6.1.4.1.14817.7.3.1.2.227.1.9	AprisaXEQuadJetWaveFormShapers	read-write	This indicates the T1 Tx Waveform Shaper for a port; 0~133 ft, 133~266 ft, 266~399 ft, 399~533 ft, 533~655 ft.
INT aprisaXESoftwareUpgradeCommand	1.3.6.1.4.1.14817.7.3.1.2.300.2	INTEGER	read-write	Command used to instigate a software upgrade.
aprisaXESoftwareUpgradeControl	1.3.6.1.4.1.14817.7.3.1.2.300
aprisaXESoftwareUpgradeControlGroup	1.3.6.1.4.1.14817.7.3.1.1.300			The Aprisa XE software upgrade group.
FOU aprisaXESoftwareUpgradeResult	1.3.6.1.4.1.14817.7.3.1.2.300.3	FourRFProcessResultType	read-only	Status of a software upgrade, this will have to be polled to follow the upload progress.
STR aprisaXESoftwareUpgradeVersion	1.3.6.1.4.1.14817.7.3.1.2.300.1	DisplayString	read-write	New software version details of the form x_y_z.
aprisaXETerminal	1.3.6.1.4.1.14817.7.3.1.2.1
FOU aprisaXETerminalAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.1.9	FourRFAlarmStatus	read-only	The terminal alarm status, this reflects the overall status of the terminal. This will match the colour of the front panel control LED. The states used are noAlarm, minorAlarm and majorAlarm.
U32 aprisaXETerminalAllocatedBandwidth	1.3.6.1.4.1.14817.7.3.1.2.1.14	Unsigned32	read-only	This returns the total bandwidth allocated over the link in kbps.
U32 aprisaXETerminalBandwidth	1.3.6.1.4.1.14817.7.3.1.2.1.12	Unsigned32	read-only	This returns the total bandwidth available over the link in kbps.
U32 aprisaXETerminalBootloaderDataVersion	1.3.6.1.4.1.14817.7.3.1.2.1.22	Unsigned32	read-only	This indicates the data version of the shared data field in the bootloader.
INT aprisaXETerminalClockReference	1.3.6.1.4.1.14817.7.3.1.2.1.7	INTEGER	read-write	The terminal clock reference configuration: automatic - manual -
FOU aprisaXETerminalClockSource	1.3.6.1.4.1.14817.7.3.1.2.1.8	FourRFClockSource	read-write	The terminal clock source configuration: network - clocking is recovered from the synchronous network to which the terminal is connected. link - clocking is recovered from the remote end of the link. internal - the clock is generated internally. The clock reference must be in manual mode for this to take effect.
INT aprisaXETerminalEquipmentType	1.3.6.1.4.1.14817.7.3.1.2.1.24	INTEGER	read-only	This indicates what type of equipment the terminal is.
aprisaXETerminalGroup	1.3.6.1.4.1.14817.7.3.1.1.1			The AprisaXE terminal settings group.
INT aprisaXETerminalImageAlarmClear	1.3.6.1.4.1.14817.7.3.1.2.1.20	INTEGER	read-write	Indicates whether the terminal startup sequence is complete.
U32 aprisaXETerminalLoopbackBandwidth	1.3.6.1.4.1.14817.7.3.1.2.1.15	Unsigned32	read-only	This returns the total loopback bandwidth allocated in kbps.
FOU aprisaXETerminalModulationState	1.3.6.1.4.1.14817.7.3.1.2.1.6	FourRFModulationType	read-write	The terminal modulation state.
INT aprisaXETerminalMuxStatus	1.3.6.1.4.1.14817.7.3.1.2.1.21	INTEGER	read-only	This indicates if the terminal is operating in Mux mode.
INT aprisaXETerminalNetworkClockCommand	1.3.6.1.4.1.14817.7.3.1.2.1.18	INTEGER	read-write	Forces a change in the active network clock.
FOU aprisaXETerminalNetworkClockPrimaryStatus	1.3.6.1.4.1.14817.7.3.1.2.1.16	FourRFNetworkClockStatus	read-only	This returns the status of the network clock primary source.
FOU aprisaXETerminalNetworkClockSecondaryStatus	1.3.6.1.4.1.14817.7.3.1.2.1.17	FourRFNetworkClockStatus	read-only	This returns the status of the network clock secondary source.
FOU aprisaXETerminalRfChannelWidth	1.3.6.1.4.1.14817.7.3.1.2.1.4	FourRFChannelWidth	read-write	The terminal RF channel width, the options are: 20kHz, 25kHz, 50kHz, 75kHz, 100kHz, 125kHz, 150kHz, 200kHz, 250kHz, 400kHz, 500kHz, 800kHz, 1MHz, 1.25MHz, 1.75MHz, 2MHz, 3.5MHz, 7MHz
FOU aprisaXETerminalRSSI	1.3.6.1.4.1.14817.7.3.1.2.1.5	FourRFRSSI	read-only	The terminal RSSI in dBm.
FOU aprisaXETerminalRxAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.1.10	FourRFAlarmStatus	read-only	The terminal alarm status, this reflects the overall RX status of the terminal. This will match the colour of the front panel RX LED. The states used are noAlarm, minorAlarm and majorAlarm.
INT aprisaXETerminalStartupComplete	1.3.6.1.4.1.14817.7.3.1.2.1.19	INTEGER	read-only	Indicates whether the terminal startup sequence is complete.
FOU aprisaXETerminalTxAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.1.11	FourRFAlarmStatus	read-only	The terminal alarm status, this reflects the overall TX status of the terminal. This will match the colour of the front panel TX LED. The states used are noAlarm, minorAlarm and majorAlarm.
INT aprisaXETerminalUploadFailAlarmClear	1.3.6.1.4.1.14817.7.3.1.2.1.23	INTEGER	read-write	Used to clear a current Upload Failure Alarm.
aprisaXETestObjects	1.3.6.1.4.1.14817.7.3.1.4			The root of the OID sub-tree for the AprisaXE test objects.
aprisaXETransmitter	1.3.6.1.4.1.14817.7.3.1.2.36
FOU aprisaXETransmitter11VPowerStatus	1.3.6.1.4.1.14817.7.3.1.2.36.5	FourRFAlarmStatus	read-only	The status of the transmitter 11V power supply.
APR aprisaXETransmitter11VSupply	1.3.6.1.4.1.14817.7.3.1.2.36.15	AprisaXEAdcVoltage	read-only	The 11V supply rail value in millivolts.
FOU aprisaXETransmitter28VPowerStatus	1.3.6.1.4.1.14817.7.3.1.2.36.6	FourRFAlarmStatus	read-only	The status of the transmitter 28V power supply.
APR aprisaXETransmitter28VSupply	1.3.6.1.4.1.14817.7.3.1.2.36.14	AprisaXEAdcVoltage	read-only	The 28V supply rail value in millivolts.
APR aprisaXETransmitter5VDigitalSupply	1.3.6.1.4.1.14817.7.3.1.2.36.16	AprisaXEAdcVoltage	read-only	The 5V digital supply rail value in millivolts.
FOU aprisaXETransmitter5VPowerStatus	1.3.6.1.4.1.14817.7.3.1.2.36.4	FourRFAlarmStatus	read-only	The status of the transmitter 5V power supply.
APR aprisaXETransmitter7VSupply	1.3.6.1.4.1.14817.7.3.1.2.36.17	AprisaXEAdcVoltage	read-only	The 7V RF supply rail value in millivolts.
APR aprisaXETransmitter9VSupply	1.3.6.1.4.1.14817.7.3.1.2.36.18	AprisaXEAdcVoltage	read-only	The 9V supply synthesiser rail value in millivolts.
APR aprisaXETransmitterADCChEight	1.3.6.1.4.1.14817.7.3.1.2.36.31	AprisaXEAdcVoltage	read-only	The TX adc ch eight voltage.
APR aprisaXETransmitterADCChEleven	1.3.6.1.4.1.14817.7.3.1.2.36.34	AprisaXEAdcVoltage	read-only	The TX adc ch eleven voltage.
APR aprisaXETransmitterADCChFive	1.3.6.1.4.1.14817.7.3.1.2.36.28	AprisaXEAdcVoltage	read-only	The TX adc ch five voltage.
APR aprisaXETransmitterADCChFour	1.3.6.1.4.1.14817.7.3.1.2.36.27	AprisaXEAdcVoltage	read-only	The TX adc ch four voltage.
APR aprisaXETransmitterADCChNine	1.3.6.1.4.1.14817.7.3.1.2.36.32	AprisaXEAdcVoltage	read-only	The TX adc ch nine voltage.
APR aprisaXETransmitterADCChOne	1.3.6.1.4.1.14817.7.3.1.2.36.24	AprisaXEAdcVoltage	read-only	The TX adc ch one voltage.
APR aprisaXETransmitterADCChSeven	1.3.6.1.4.1.14817.7.3.1.2.36.30	AprisaXEAdcVoltage	read-only	The TX adc ch seven voltage.
APR aprisaXETransmitterADCChSix	1.3.6.1.4.1.14817.7.3.1.2.36.29	AprisaXEAdcVoltage	read-only	The TX adc ch six voltage.
APR aprisaXETransmitterADCChTen	1.3.6.1.4.1.14817.7.3.1.2.36.33	AprisaXEAdcVoltage	read-only	The TX adc ch ten voltage.
APR aprisaXETransmitterADCChThree	1.3.6.1.4.1.14817.7.3.1.2.36.26	AprisaXEAdcVoltage	read-only	The TX adc ch three voltage.
APR aprisaXETransmitterADCChTwo	1.3.6.1.4.1.14817.7.3.1.2.36.25	AprisaXEAdcVoltage	read-only	The TX adc ch two voltage.
APR aprisaXETransmitterADCChZero	1.3.6.1.4.1.14817.7.3.1.2.36.23	AprisaXEAdcVoltage	read-only	The TX adc ch zero voltage.
APR aprisaXETransmitterAGC	1.3.6.1.4.1.14817.7.3.1.2.36.9	AprisaXEAdcVoltage	read-only	The Automatic Gain Control value in millivolts.
aprisaXETransmitterAlarms	1.3.6.1.4.1.14817.7.3.1.2.86.1
FOU aprisaXETransmitterAmplifierBalanceStatus	1.3.6.1.4.1.14817.7.3.1.2.36.36	FourRFAlarmStatus	read-only	The status of the transmitter Balanced Power Amplifier.
APR aprisaXETransmitterCharacterisationDataStatus	1.3.6.1.4.1.14817.7.3.1.2.36.19	AprisaXEDataStatus	read-only	The status of the transmitter characterisation data.
INT aprisaXETransmitterCommand	1.3.6.1.4.1.14817.7.3.1.2.36.2	INTEGER	read-write	Commands used to control the transmitter, currently the transmitter can be switched on and off. No other commands are defined.
APR aprisaXETransmitterForwardPower	1.3.6.1.4.1.14817.7.3.1.2.36.10	AprisaXEAdcVoltage	read-only	The forward power measurement value in millivolts.
FOU aprisaXETransmitterFrequency	1.3.6.1.4.1.14817.7.3.1.2.36.7	FourRFFrequency	read-write	The terminal transmit frequency in MHz. The possible bands are: 330 to 400 MHz (300 MHz) 400 to 470 MHz (400 MHz) 1350 to 1550 MHz (1400 MHz) The frequency value should be supplied in Hz.
aprisaXETransmitterGroup	1.3.6.1.4.1.14817.7.3.1.1.36			The AprisaXE transmitter settings group.
APR aprisaXETransmitterMibDataStatus	1.3.6.1.4.1.14817.7.3.1.2.36.22	AprisaXEDataStatus	read-only	The status of the transmitter MIB data.
FOU aprisaXETransmitterNeg5VPowerStatus	1.3.6.1.4.1.14817.7.3.1.2.36.35	FourRFAlarmStatus	read-only	The status of the transmitter Negative 5V power supply.
STR aprisaXETransmitterOperationalDataVersion	1.3.6.1.4.1.14817.7.3.1.2.36.39	DisplayString	read-only	The version of the operational data for the transmitter.
FOU aprisaXETransmitterPower	1.3.6.1.4.1.14817.7.3.1.2.36.8	FourRFTxPower	read-write	The TX power value, the value should be entered in dB.
APR aprisaXETransmitterReturnLoss	1.3.6.1.4.1.14817.7.3.1.2.36.21	AprisaXEDbValue	read-only	The return loss for the transmitter.
APR aprisaXETransmitterReversePower	1.3.6.1.4.1.14817.7.3.1.2.36.11	AprisaXEAdcVoltage	read-only	The reverse power value in millivolts.
FOU aprisaXETransmitterSerialNumber	1.3.6.1.4.1.14817.7.3.1.2.36.20	FourRFSerialNumber	read-only	The unique module serial number for the transmitter.
INT aprisaXETransmitterStatus	1.3.6.1.4.1.14817.7.3.1.2.36.1	INTEGER	read-only	Indicates whether the transmitter is currently on or off.
INT aprisaXETransmitterSwCompatibility	1.3.6.1.4.1.14817.7.3.1.2.36.40	INTEGER	read-only	The transmitter software compatibility number.
FOU aprisaXETransmitterSynthesiserStatus	1.3.6.1.4.1.14817.7.3.1.2.36.3	FourRFAlarmStatus	read-only	The status of the transmitter synthesiser.
INT aprisaXETransmitterSynthFileVersion	1.3.6.1.4.1.14817.7.3.1.2.36.38	INTEGER	read-only	The version of the Synth File loaded from the filesystem.
INT aprisaXETransmitterTcxoAdjustment	1.3.6.1.4.1.14817.7.3.1.2.36.37	INTEGER	read-write	The TX TCXO adjustment to be made by the customer, to tune the TCXO. This is a shift in DAC steps.
FOU aprisaXETransmitterTemperature	1.3.6.1.4.1.14817.7.3.1.2.36.12	FourRFTemperature	read-only	The temperature value in degrees Celcius.
APR aprisaXETransmitterVTune	1.3.6.1.4.1.14817.7.3.1.2.36.13	AprisaXEAdcVoltage	read-only	The voltage output from TX synth.
aprisaXETReceiverGroup	1.3.6.1.4.1.14817.7.3.1.1.46			The AprisaXE Receiver settings group.
aprisaXETx11VHiAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.17
I32 aprisaXETx11VHiAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.17.5	Integer32	read-only	Indicates the level at which the transmitter 11V voltage too high will be cleared.
FOU aprisaXETx11VHiAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.17.3	FourRFAlarmEnabled	read-only	Indicates whether the transmitter 11V voltage too high alarm is enabled.
FOU aprisaXETx11VHiAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.17.2	FourRFAlarmSeverity	read-only	The severity of the transmitter 11V voltage too high alarm.
aprisaXETx11VHiAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.136			The AprisaXE transmitter 11V voltage too high alarm group.
FOU aprisaXETx11VHiAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.17.1	FourRFAlarmStatus	read-only	The status of the transmitter 11V voltage too high alarm.
I32 aprisaXETx11VHiAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.17.4	Integer32	read-only	Indicates the level at which the transmitter 11V voltage too high alarm will be set.
aprisaXETx11VLoAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.18
I32 aprisaXETx11VLoAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.18.5	Integer32	read-only	Indicates the level at which the transmitter 11V voltage too low will be cleared.
FOU aprisaXETx11VLoAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.18.3	FourRFAlarmEnabled	read-only	Indicates whether the transmitter 11V voltage too low alarm is enabled.
FOU aprisaXETx11VLoAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.18.2	FourRFAlarmSeverity	read-only	The severity of the transmitter 11V voltage too low alarm.
aprisaXETx11VLoAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.141			The AprisaXE transmitter 11V voltage too low alarm group.
FOU aprisaXETx11VLoAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.18.1	FourRFAlarmStatus	read-only	The status of the transmitter 11V voltage too low alarm.
I32 aprisaXETx11VLoAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.18.4	Integer32	read-only	Indicates the level at which the transmitter 11V voltage too low alarm will be set.
aprisaXETx28VHiAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.19
I32 aprisaXETx28VHiAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.19.5	Integer32	read-only	Indicates the level at which the transmitter 28V voltage too high will be cleared.
FOU aprisaXETx28VHiAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.19.3	FourRFAlarmEnabled	read-only	Indicates whether the transmitter 28V voltage too high alarm is enabled.
FOU aprisaXETx28VHiAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.19.2	FourRFAlarmSeverity	read-only	The severity of the transmitter 28V voltage too high alarm.
aprisaXETx28VHiAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.146			The AprisaXE transmitter 28V voltage too high alarm group.
FOU aprisaXETx28VHiAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.19.1	FourRFAlarmStatus	read-only	The status of the transmitter 28V voltage too high alarm.
I32 aprisaXETx28VHiAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.19.4	Integer32	read-only	Indicates the level at which the transmitter 28V voltage too high alarm will be set.
aprisaXETx28VLoAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.20
I32 aprisaXETx28VLoAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.20.5	Integer32	read-only	Indicates the level at which the transmitter 28V voltage too low will be cleared.
FOU aprisaXETx28VLoAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.20.3	FourRFAlarmEnabled	read-only	Indicates whether the transmitter 28V voltage too low alarm is enabled.
FOU aprisaXETx28VLoAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.20.2	FourRFAlarmSeverity	read-only	The severity of the transmitter 28V voltage too low alarm.
aprisaXETx28VLoAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.151			The AprisaXE transmitter 28V voltage too low alarm group.
FOU aprisaXETx28VLoAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.20.1	FourRFAlarmStatus	read-only	The status of the transmitter 28V voltage too low alarm.
I32 aprisaXETx28VLoAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.20.4	Integer32	read-only	Indicates the level at which the transmitter 28V voltage too low alarm will be set.
aprisaXETx5VDigHiAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.11
I32 aprisaXETx5VDigHiAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.11.5	Integer32	read-only	Indicates the level at which the transmitter 5V digital voltage too high will be cleared.
FOU aprisaXETx5VDigHiAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.11.3	FourRFAlarmEnabled	read-only	Indicates whether the transmitter 5V digital voltage too high alarm is enabled.
FOU aprisaXETx5VDigHiAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.11.2	FourRFAlarmSeverity	read-only	The severity of the transmitter 5V digital voltage too high alarm.
aprisaXETx5VDigHiAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.106			The AprisaXE transmitter 5V digital voltage too high alarm group.
FOU aprisaXETx5VDigHiAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.11.1	FourRFAlarmStatus	read-only	The status of the transmitter 5V digital voltage too high alarm.
I32 aprisaXETx5VDigHiAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.11.4	Integer32	read-only	Indicates the level at which the transmitter 5V digital voltage too high alarm will be set.
aprisaXETx5VDigLoAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.12
I32 aprisaXETx5VDigLoAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.12.5	Integer32	read-only	Indicates the level at which the transmitter 5V digital voltage too low will be cleared.
FOU aprisaXETx5VDigLoAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.12.3	FourRFAlarmEnabled	read-only	Indicates whether the transmitter 5V digital voltage too low alarm is enabled.
FOU aprisaXETx5VDigLoAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.12.2	FourRFAlarmSeverity	read-only	The severity of the transmitter 5V digital voltage too low alarm.
aprisaXETx5VDigLoAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.111			The AprisaXE transmitter 5V digital voltage too low alarm group.
FOU aprisaXETx5VDigLoAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.12.1	FourRFAlarmStatus	read-only	The status of the transmitter 5V digital voltage too low alarm.
I32 aprisaXETx5VDigLoAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.12.4	Integer32	read-only	Indicates the level at which the transmitter 5V digital voltage too low alarm will be set.
aprisaXETx7VRfHiAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.13
I32 aprisaXETx7VRfHiAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.13.5	Integer32	read-only	Indicates the level at which the transmitter 7V RF voltage too high will be cleared.
FOU aprisaXETx7VRfHiAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.13.3	FourRFAlarmEnabled	read-only	Indicates whether the transmitter 7V RF voltage too high alarm is enabled.
FOU aprisaXETx7VRfHiAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.13.2	FourRFAlarmSeverity	read-only	The severity of the transmitter 7V RF voltage too high alarm.
aprisaXETx7VRfHiAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.116			The AprisaXE transmitter 7V RF voltage too high alarm group.
FOU aprisaXETx7VRfHiAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.13.1	FourRFAlarmStatus	read-only	The status of the transmitter 7V RF voltage too high alarm.
I32 aprisaXETx7VRfHiAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.13.4	Integer32	read-only	Indicates the level at which the transmitter 7V RF voltage too high alarm will be set.
aprisaXETx7VRfLoAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.14
I32 aprisaXETx7VRfLoAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.14.5	Integer32	read-only	Indicates the level at which the transmitter 7V RF voltage too low will be cleared.
FOU aprisaXETx7VRfLoAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.14.3	FourRFAlarmEnabled	read-only	Indicates whether the transmitter 7V RF voltage too low alarm is enabled.
FOU aprisaXETx7VRfLoAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.14.2	FourRFAlarmSeverity	read-only	The severity of the transmitter 7V RF voltage too low alarm.
aprisaXETx7VRfLoAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.121			The AprisaXE transmitter 7V RF voltage too low alarm group.
FOU aprisaXETx7VRfLoAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.14.1	FourRFAlarmStatus	read-only	The status of the transmitter 7V RF voltage too low alarm.
I32 aprisaXETx7VRfLoAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.14.4	Integer32	read-only	Indicates the level at which the transmitter 7V RF voltage too low alarm will be set.
aprisaXETx9VHiAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.15
I32 aprisaXETx9VHiAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.15.5	Integer32	read-only	Indicates the level at which the transmitter 9V voltage too high will be cleared.
FOU aprisaXETx9VHiAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.15.3	FourRFAlarmEnabled	read-only	Indicates whether the transmitter 9V voltage too high alarm is enabled.
FOU aprisaXETx9VHiAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.15.2	FourRFAlarmSeverity	read-only	The severity of the transmitter 9V voltage too high alarm.
aprisaXETx9VHiAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.126			The AprisaXE transmitter 9V voltage too high alarm group.
FOU aprisaXETx9VHiAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.15.1	FourRFAlarmStatus	read-only	The status of the transmitter 9V voltage too high alarm.
I32 aprisaXETx9VHiAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.15.4	Integer32	read-only	Indicates the level at which the transmitter 9V voltage too high alarm will be set.
aprisaXETx9VLoAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.16
I32 aprisaXETx9VLoAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.16.5	Integer32	read-only	Indicates the level at which the transmitter 9V voltage too low will be cleared.
FOU aprisaXETx9VLoAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.16.3	FourRFAlarmEnabled	read-only	Indicates whether the transmitter 9V voltage too low alarm is enabled.
FOU aprisaXETx9VLoAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.16.2	FourRFAlarmSeverity	read-only	The severity of the transmitter 9V voltage too low alarm.
aprisaXETx9VLoAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.131			The AprisaXE transmitter 9V voltage too low alarm group.
FOU aprisaXETx9VLoAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.16.1	FourRFAlarmStatus	read-only	The status of the transmitter 9V voltage too low alarm.
I32 aprisaXETx9VLoAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.16.4	Integer32	read-only	Indicates the level at which the transmitter 9V voltage too low alarm will be set.
aprisaXETxADCChEightHiAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.39
I32 aprisaXETxADCChEightHiAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.39.6	Integer32	read-only	Indicates the level at which the transmitter ADC Ch Eight voltage too high will be cleared.
FOU aprisaXETxADCChEightHiAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.39.4	FourRFAlarmEnabled	read-only	Indicates whether the transmitter ADC Ch Eight voltage too high alarm is enabled.
STR aprisaXETxADCChEightHiAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.1.39.1	DisplayString	read-only	The name of the transmitter ADC Ch Eight voltage too high alarm.
FOU aprisaXETxADCChEightHiAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.39.3	FourRFAlarmSeverity	read-only	The severity of the transmitter ADC Ch Eight voltage too high alarm.
aprisaXETxADCChEightHiAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.266			The aprisaXETx transmitter ADC Ch Eight voltage too high alarm group.
FOU aprisaXETxADCChEightHiAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.39.2	FourRFAlarmStatus	read-only	The status of the transmitter ADC Ch Eight voltage too high alarm.
I32 aprisaXETxADCChEightHiAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.39.5	Integer32	read-only	Indicates the level at which the transmitter ADC Ch Eight voltage too high alarm will be set.
aprisaXETxADCChEightLoAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.40
I32 aprisaXETxADCChEightLoAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.40.6	Integer32	read-only	Indicates the level at wLoch the transmitter ADC Ch Eight voltage too low will be cleared.
FOU aprisaXETxADCChEightLoAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.40.4	FourRFAlarmEnabled	read-only	Indicates whether the transmitter ADC Ch Eight voltage too low alarm is enabled.
STR aprisaXETxADCChEightLoAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.1.40.1	DisplayString	read-only	The name of the transmitter ADC Ch Eight voltage too low alarm.
FOU aprisaXETxADCChEightLoAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.40.3	FourRFAlarmSeverity	read-only	The severity of the transmitter ADC Ch Eight voltage too low alarm.
aprisaXETxADCChEightLoAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.267			The aprisaXETx transmitter ADC Ch Eight voltage too High alarm group.
FOU aprisaXETxADCChEightLoAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.40.2	FourRFAlarmStatus	read-only	The status of the transmitter ADC Ch Eight voltage too low alarm.
I32 aprisaXETxADCChEightLoAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.40.5	Integer32	read-only	Indicates the level at wLoch the transmitter ADC Ch Eight voltage too low alarm will be set.
aprisaXETxADCChElevenHiAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.45
I32 aprisaXETxADCChElevenHiAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.45.6	Integer32	read-only	Indicates the level at which the transmitter ADC Ch Eleven voltage too high will be cleared.
FOU aprisaXETxADCChElevenHiAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.45.4	FourRFAlarmEnabled	read-only	Indicates whether the transmitter ADC Ch Eleven voltage too high alarm is enabled.
STR aprisaXETxADCChElevenHiAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.1.45.1	DisplayString	read-only	The name of the transmitter ADC Ch Eleven voltage too high alarm.
FOU aprisaXETxADCChElevenHiAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.45.3	FourRFAlarmSeverity	read-only	The severity of the transmitter ADC Ch Eleven voltage too high alarm.
aprisaXETxADCChElevenHiAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.272			The aprisaXETx transmitter ADC Ch Eleven voltage too high alarm group.
FOU aprisaXETxADCChElevenHiAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.45.2	FourRFAlarmStatus	read-only	The status of the transmitter ADC Ch Eleven voltage too high alarm.
I32 aprisaXETxADCChElevenHiAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.45.5	Integer32	read-only	Indicates the level at which the transmitter ADC Ch Eleven voltage too high alarm will be set.
aprisaXETxADCChElevenLoAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.46
I32 aprisaXETxADCChElevenLoAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.46.6	Integer32	read-only	Indicates the level at wLoch the transmitter ADC Ch Eleven voltage too low will be cleared.
FOU aprisaXETxADCChElevenLoAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.46.4	FourRFAlarmEnabled	read-only	Indicates whether the transmitter ADC Ch Eleven voltage too low alarm is enabled.
STR aprisaXETxADCChElevenLoAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.1.46.1	DisplayString	read-only	The name of the transmitter ADC Ch Eleven voltage too low alarm.
FOU aprisaXETxADCChElevenLoAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.46.3	FourRFAlarmSeverity	read-only	The severity of the transmitter ADC Ch Eleven voltage too low alarm.
aprisaXETxADCChElevenLoAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.273			The aprisaXETx transmitter ADC Ch Eleven voltage too High alarm group.
FOU aprisaXETxADCChElevenLoAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.46.2	FourRFAlarmStatus	read-only	The status of the transmitter ADC Ch Eleven voltage too low alarm.
I32 aprisaXETxADCChElevenLoAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.46.5	Integer32	read-only	Indicates the level at wLoch the transmitter ADC Ch Eleven voltage too low alarm will be set.
aprisaXETxADCChFiveHiAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.33
I32 aprisaXETxADCChFiveHiAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.33.6	Integer32	read-only	Indicates the level at which the transmitter ADC Ch Five voltage too high will be cleared.
FOU aprisaXETxADCChFiveHiAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.33.4	FourRFAlarmEnabled	read-only	Indicates whether the transmitter ADC Ch Five voltage too high alarm is enabled.
STR aprisaXETxADCChFiveHiAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.1.33.1	DisplayString	read-only	The name of the transmitter ADC Ch Five voltage too high alarm.
FOU aprisaXETxADCChFiveHiAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.33.3	FourRFAlarmSeverity	read-only	The severity of the transmitter ADC Ch Five voltage too high alarm.
aprisaXETxADCChFiveHiAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.260			The aprisaXETx transmitter ADC Ch Five voltage too high alarm group.
FOU aprisaXETxADCChFiveHiAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.33.2	FourRFAlarmStatus	read-only	The status of the transmitter ADC Ch Five voltage too high alarm.
I32 aprisaXETxADCChFiveHiAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.33.5	Integer32	read-only	Indicates the level at which the transmitter ADC Ch Five voltage too high alarm will be set.
aprisaXETxADCChFiveLoAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.34
I32 aprisaXETxADCChFiveLoAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.34.6	Integer32	read-only	Indicates the level at wLoch the transmitter ADC Ch Five voltage too low will be cleared.
FOU aprisaXETxADCChFiveLoAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.34.4	FourRFAlarmEnabled	read-only	Indicates whether the transmitter ADC Ch Five voltage too low alarm is enabled.
STR aprisaXETxADCChFiveLoAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.1.34.1	DisplayString	read-only	The name of the transmitter ADC Ch Five voltage too low alarm.
FOU aprisaXETxADCChFiveLoAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.34.3	FourRFAlarmSeverity	read-only	The severity of the transmitter ADC Ch Five voltage too low alarm.
aprisaXETxADCChFiveLoAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.261			The aprisaXETx transmitter ADC Ch Five voltage too High alarm group.
FOU aprisaXETxADCChFiveLoAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.34.2	FourRFAlarmStatus	read-only	The status of the transmitter ADC Ch Five voltage too low alarm.
I32 aprisaXETxADCChFiveLoAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.34.5	Integer32	read-only	Indicates the level at wLoch the transmitter ADC Ch Five voltage too low alarm will be set.
aprisaXETxADCChFourHiAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.31
I32 aprisaXETxADCChFourHiAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.31.6	Integer32	read-only	Indicates the level at which the transmitter ADC Ch Four voltage too high will be cleared.
FOU aprisaXETxADCChFourHiAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.31.4	FourRFAlarmEnabled	read-only	Indicates whether the transmitter ADC Ch Four voltage too high alarm is enabled.
STR aprisaXETxADCChFourHiAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.1.31.1	DisplayString	read-only	The name of the transmitter ADC Ch Four voltage too high alarm.
FOU aprisaXETxADCChFourHiAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.31.3	FourRFAlarmSeverity	read-only	The severity of the transmitter ADC Ch Four voltage too high alarm.
aprisaXETxADCChFourHiAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.258			The aprisaXETx transmitter ADC Ch Four voltage too high alarm group.
FOU aprisaXETxADCChFourHiAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.31.2	FourRFAlarmStatus	read-only	The status of the transmitter ADC Ch Four voltage too high alarm.
I32 aprisaXETxADCChFourHiAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.31.5	Integer32	read-only	Indicates the level at which the transmitter ADC Ch Four voltage too high alarm will be set.
aprisaXETxADCChFourLoAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.32
I32 aprisaXETxADCChFourLoAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.32.6	Integer32	read-only	Indicates the level at wLoch the transmitter ADC Ch Four voltage too low will be cleared.
FOU aprisaXETxADCChFourLoAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.32.4	FourRFAlarmEnabled	read-only	Indicates whether the transmitter ADC Ch Four voltage too low alarm is enabled.
STR aprisaXETxADCChFourLoAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.1.32.1	DisplayString	read-only	The name of the transmitter ADC Ch Four voltage too low alarm.
FOU aprisaXETxADCChFourLoAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.32.3	FourRFAlarmSeverity	read-only	The severity of the transmitter ADC Ch Four voltage too low alarm.
aprisaXETxADCChFourLoAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.259			The aprisaXETx transmitter ADC Ch Four voltage too High alarm group.
FOU aprisaXETxADCChFourLoAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.32.2	FourRFAlarmStatus	read-only	The status of the transmitter ADC Ch Four voltage too low alarm.
I32 aprisaXETxADCChFourLoAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.32.5	Integer32	read-only	Indicates the level at wLoch the transmitter ADC Ch Four voltage too low alarm will be set.
aprisaXETxADCChNineHiAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.41
I32 aprisaXETxADCChNineHiAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.41.6	Integer32	read-only	Indicates the level at which the transmitter ADC Ch Nine voltage too high will be cleared.
FOU aprisaXETxADCChNineHiAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.41.4	FourRFAlarmEnabled	read-only	Indicates whether the transmitter ADC Ch Nine voltage too high alarm is enabled.
STR aprisaXETxADCChNineHiAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.1.41.1	DisplayString	read-only	The name of the transmitter ADC Ch Nine voltage too high alarm.
FOU aprisaXETxADCChNineHiAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.41.3	FourRFAlarmSeverity	read-only	The severity of the transmitter ADC Ch Nine voltage too high alarm.
aprisaXETxADCChNineHiAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.268			The aprisaXETx transmitter ADC Ch Nine voltage too high alarm group.
FOU aprisaXETxADCChNineHiAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.41.2	FourRFAlarmStatus	read-only	The status of the transmitter ADC Ch Nine voltage too high alarm.
I32 aprisaXETxADCChNineHiAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.41.5	Integer32	read-only	Indicates the level at which the transmitter ADC Ch Nine voltage too high alarm will be set.
aprisaXETxADCChNineLoAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.42
I32 aprisaXETxADCChNineLoAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.42.6	Integer32	read-only	Indicates the level at wLoch the transmitter ADC Ch Nine voltage too low will be cleared.
FOU aprisaXETxADCChNineLoAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.42.4	FourRFAlarmEnabled	read-only	Indicates whether the transmitter ADC Ch Nine voltage too low alarm is enabled.
STR aprisaXETxADCChNineLoAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.1.42.1	DisplayString	read-only	The name of the transmitter ADC Ch Nine voltage too low alarm.
FOU aprisaXETxADCChNineLoAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.42.3	FourRFAlarmSeverity	read-only	The severity of the transmitter ADC Ch Nine voltage too low alarm.
aprisaXETxADCChNineLoAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.269			The aprisaXETx transmitter ADC Ch Nine voltage too High alarm group.
FOU aprisaXETxADCChNineLoAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.42.2	FourRFAlarmStatus	read-only	The status of the transmitter ADC Ch Nine voltage too low alarm.
I32 aprisaXETxADCChNineLoAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.42.5	Integer32	read-only	Indicates the level at wLoch the transmitter ADC Ch Nine voltage too low alarm will be set.
aprisaXETxADCChOneHiAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.25
I32 aprisaXETxADCChOneHiAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.25.6	Integer32	read-only	Indicates the level at which the transmitter ADC Ch One voltage too high will be cleared.
FOU aprisaXETxADCChOneHiAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.25.4	FourRFAlarmEnabled	read-only	Indicates whether the transmitter ADC Ch One voltage too high alarm is enabled.
STR aprisaXETxADCChOneHiAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.1.25.1	DisplayString	read-only	The name of the transmitter ADC Ch One voltage too high alarm.
FOU aprisaXETxADCChOneHiAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.25.3	FourRFAlarmSeverity	read-only	The severity of the transmitter ADC Ch One voltage too high alarm.
aprisaXETxADCChOneHiAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.252			The aprisaXETx transmitter ADC Ch One voltage too high alarm group.
FOU aprisaXETxADCChOneHiAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.25.2	FourRFAlarmStatus	read-only	The status of the transmitter ADC Ch One voltage too high alarm.
I32 aprisaXETxADCChOneHiAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.25.5	Integer32	read-only	Indicates the level at which the transmitter ADC Ch One voltage too high alarm will be set.
aprisaXETxADCChOneLoAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.26
I32 aprisaXETxADCChOneLoAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.26.6	Integer32	read-only	Indicates the level at wLoch the transmitter ADC Ch One voltage too low will be cleared.
FOU aprisaXETxADCChOneLoAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.26.4	FourRFAlarmEnabled	read-only	Indicates whether the transmitter ADC Ch One voltage too low alarm is enabled.
STR aprisaXETxADCChOneLoAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.1.26.1	DisplayString	read-only	The name of the transmitter ADC Ch One voltage too low alarm.
FOU aprisaXETxADCChOneLoAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.26.3	FourRFAlarmSeverity	read-only	The severity of the transmitter ADC Ch One voltage too low alarm.
aprisaXETxADCChOneLoAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.253			The aprisaXETx transmitter ADC Ch One voltage too High alarm group.
FOU aprisaXETxADCChOneLoAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.26.2	FourRFAlarmStatus	read-only	The status of the transmitter ADC Ch One voltage too low alarm.
I32 aprisaXETxADCChOneLoAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.26.5	Integer32	read-only	Indicates the level at wLoch the transmitter ADC Ch One voltage too low alarm will be set.
aprisaXETxADCChSevenHiAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.37
I32 aprisaXETxADCChSevenHiAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.37.6	Integer32	read-only	Indicates the level at which the transmitter ADC Ch Seven voltage too high will be cleared.
FOU aprisaXETxADCChSevenHiAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.37.4	FourRFAlarmEnabled	read-only	Indicates whether the transmitter ADC Ch Seven voltage too high alarm is enabled.
STR aprisaXETxADCChSevenHiAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.1.37.1	DisplayString	read-only	The name of the transmitter ADC Ch Seven voltage too high alarm.
FOU aprisaXETxADCChSevenHiAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.37.3	FourRFAlarmSeverity	read-only	The severity of the transmitter ADC Ch Seven voltage too high alarm.
aprisaXETxADCChSevenHiAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.264			The aprisaXETx transmitter ADC Ch Seven voltage too high alarm group.
FOU aprisaXETxADCChSevenHiAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.37.2	FourRFAlarmStatus	read-only	The status of the transmitter ADC Ch Seven voltage too high alarm.
I32 aprisaXETxADCChSevenHiAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.37.5	Integer32	read-only	Indicates the level at which the transmitter ADC Ch Seven voltage too high alarm will be set.
aprisaXETxADCChSevenLoAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.38
I32 aprisaXETxADCChSevenLoAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.38.6	Integer32	read-only	Indicates the level at wLoch the transmitter ADC Ch Seven voltage too low will be cleared.
FOU aprisaXETxADCChSevenLoAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.38.4	FourRFAlarmEnabled	read-only	Indicates whether the transmitter ADC Ch Seven voltage too low alarm is enabled.
STR aprisaXETxADCChSevenLoAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.1.38.1	DisplayString	read-only	The name of the transmitter ADC Ch Seven voltage too low alarm.
FOU aprisaXETxADCChSevenLoAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.38.3	FourRFAlarmSeverity	read-only	The severity of the transmitter ADC Ch Seven voltage too low alarm.
aprisaXETxADCChSevenLoAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.265			The aprisaXETx transmitter ADC Ch Seven voltage too High alarm group.
FOU aprisaXETxADCChSevenLoAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.38.2	FourRFAlarmStatus	read-only	The status of the transmitter ADC Ch Seven voltage too low alarm.
I32 aprisaXETxADCChSevenLoAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.38.5	Integer32	read-only	Indicates the level at wLoch the transmitter ADC Ch Seven voltage too low alarm will be set.
aprisaXETxADCChSixHiAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.35
I32 aprisaXETxADCChSixHiAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.35.6	Integer32	read-only	Indicates the level at which the transmitter ADC Ch Six voltage too high will be cleared.
FOU aprisaXETxADCChSixHiAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.35.4	FourRFAlarmEnabled	read-only	Indicates whether the transmitter ADC Ch Six voltage too high alarm is enabled.
STR aprisaXETxADCChSixHiAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.1.35.1	DisplayString	read-only	The name of the transmitter ADC Ch Six voltage too high alarm.
FOU aprisaXETxADCChSixHiAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.35.3	FourRFAlarmSeverity	read-only	The severity of the transmitter ADC Ch Six voltage too high alarm.
aprisaXETxADCChSixHiAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.262			The aprisaXETx transmitter ADC Ch Six voltage too high alarm group.
FOU aprisaXETxADCChSixHiAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.35.2	FourRFAlarmStatus	read-only	The status of the transmitter ADC Ch Six voltage too high alarm.
I32 aprisaXETxADCChSixHiAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.35.5	Integer32	read-only	Indicates the level at which the transmitter ADC Ch Six voltage too high alarm will be set.
aprisaXETxADCChSixLoAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.36
I32 aprisaXETxADCChSixLoAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.36.6	Integer32	read-only	Indicates the level at wLoch the transmitter ADC Ch Six voltage too low will be cleared.
FOU aprisaXETxADCChSixLoAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.36.4	FourRFAlarmEnabled	read-only	Indicates whether the transmitter ADC Ch Six voltage too low alarm is enabled.
STR aprisaXETxADCChSixLoAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.1.36.1	DisplayString	read-only	The name of the transmitter ADC Ch Six voltage too low alarm.
FOU aprisaXETxADCChSixLoAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.36.3	FourRFAlarmSeverity	read-only	The severity of the transmitter ADC Ch Six voltage too low alarm.
aprisaXETxADCChSixLoAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.263			The aprisaXETx transmitter ADC Ch Six voltage too High alarm group.
FOU aprisaXETxADCChSixLoAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.36.2	FourRFAlarmStatus	read-only	The status of the transmitter ADC Ch Six voltage too low alarm.
I32 aprisaXETxADCChSixLoAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.36.5	Integer32	read-only	Indicates the level at wLoch the transmitter ADC Ch Six voltage too low alarm will be set.
aprisaXETxADCChTenHiAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.43
I32 aprisaXETxADCChTenHiAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.43.6	Integer32	read-only	Indicates the level at which the transmitter ADC Ch Ten voltage too high will be cleared.
FOU aprisaXETxADCChTenHiAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.43.4	FourRFAlarmEnabled	read-only	Indicates whether the transmitter ADC Ch Ten voltage too high alarm is enabled.
STR aprisaXETxADCChTenHiAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.1.43.1	DisplayString	read-only	The name of the transmitter ADC Ch Ten voltage too high alarm.
FOU aprisaXETxADCChTenHiAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.43.3	FourRFAlarmSeverity	read-only	The severity of the transmitter ADC Ch Ten voltage too high alarm.
aprisaXETxADCChTenHiAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.270			The aprisaXETx transmitter ADC Ch Ten voltage too high alarm group.
FOU aprisaXETxADCChTenHiAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.43.2	FourRFAlarmStatus	read-only	The status of the transmitter ADC Ch Ten voltage too high alarm.
I32 aprisaXETxADCChTenHiAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.43.5	Integer32	read-only	Indicates the level at which the transmitter ADC Ch Ten voltage too high alarm will be set.
aprisaXETxADCChTenLoAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.44
I32 aprisaXETxADCChTenLoAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.44.6	Integer32	read-only	Indicates the level at wLoch the transmitter ADC Ch Ten voltage too low will be cleared.
FOU aprisaXETxADCChTenLoAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.44.4	FourRFAlarmEnabled	read-only	Indicates whether the transmitter ADC Ch Ten voltage too low alarm is enabled.
STR aprisaXETxADCChTenLoAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.1.44.1	DisplayString	read-only	The name of the transmitter ADC Ch Ten voltage too low alarm.
FOU aprisaXETxADCChTenLoAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.44.3	FourRFAlarmSeverity	read-only	The severity of the transmitter ADC Ch Ten voltage too low alarm.
aprisaXETxADCChTenLoAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.271			The aprisaXETx transmitter ADC Ch Ten voltage too High alarm group.
FOU aprisaXETxADCChTenLoAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.44.2	FourRFAlarmStatus	read-only	The status of the transmitter ADC Ch Ten voltage too low alarm.
I32 aprisaXETxADCChTenLoAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.44.5	Integer32	read-only	Indicates the level at wLoch the transmitter ADC Ch Ten voltage too low alarm will be set.
aprisaXETxADCChThreeHiAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.29
I32 aprisaXETxADCChThreeHiAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.29.6	Integer32	read-only	Indicates the level at which the transmitter ADC Ch Three voltage too high will be cleared.
FOU aprisaXETxADCChThreeHiAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.29.4	FourRFAlarmEnabled	read-only	Indicates whether the transmitter ADC Ch Three voltage too high alarm is enabled.
STR aprisaXETxADCChThreeHiAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.1.29.1	DisplayString	read-only	The name of the transmitter ADC Ch Three voltage too high alarm.
FOU aprisaXETxADCChThreeHiAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.29.3	FourRFAlarmSeverity	read-only	The severity of the transmitter ADC Ch Three voltage too high alarm.
aprisaXETxADCChThreeHiAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.256			The aprisaXETx transmitter ADC Ch Three voltage too high alarm group.
FOU aprisaXETxADCChThreeHiAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.29.2	FourRFAlarmStatus	read-only	The status of the transmitter ADC Ch Three voltage too high alarm.
I32 aprisaXETxADCChThreeHiAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.29.5	Integer32	read-only	Indicates the level at which the transmitter ADC Ch Three voltage too high alarm will be set.
aprisaXETxADCChThreeLoAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.30
I32 aprisaXETxADCChThreeLoAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.30.6	Integer32	read-only	Indicates the level at wLoch the transmitter ADC Ch Three voltage too low will be cleared.
FOU aprisaXETxADCChThreeLoAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.30.4	FourRFAlarmEnabled	read-only	Indicates whether the transmitter ADC Ch Three voltage too low alarm is enabled.
STR aprisaXETxADCChThreeLoAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.1.30.1	DisplayString	read-only	The name of the transmitter ADC Ch Three voltage too low alarm.
FOU aprisaXETxADCChThreeLoAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.30.3	FourRFAlarmSeverity	read-only	The severity of the transmitter ADC Ch Three voltage too low alarm.
aprisaXETxADCChThreeLoAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.257			The aprisaXETx transmitter ADC Ch Three voltage too High alarm group.
FOU aprisaXETxADCChThreeLoAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.30.2	FourRFAlarmStatus	read-only	The status of the transmitter ADC Ch Three voltage too low alarm.
I32 aprisaXETxADCChThreeLoAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.30.5	Integer32	read-only	Indicates the level at wLoch the transmitter ADC Ch Three voltage too low alarm will be set.
aprisaXETxADCChTwoHiAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.27
I32 aprisaXETxADCChTwoHiAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.27.6	Integer32	read-only	Indicates the level at which the transmitter ADC Ch Two voltage too high will be cleared.
FOU aprisaXETxADCChTwoHiAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.27.4	FourRFAlarmEnabled	read-only	Indicates whether the transmitter ADC Ch Two voltage too high alarm is enabled.
STR aprisaXETxADCChTwoHiAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.1.27.1	DisplayString	read-only	The name of the transmitter ADC Ch Two voltage too high alarm.
FOU aprisaXETxADCChTwoHiAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.27.3	FourRFAlarmSeverity	read-only	The severity of the transmitter ADC Ch Two voltage too high alarm.
aprisaXETxADCChTwoHiAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.254			The aprisaXETx transmitter ADC Ch Two voltage too high alarm group.
FOU aprisaXETxADCChTwoHiAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.27.2	FourRFAlarmStatus	read-only	The status of the transmitter ADC Ch Two voltage too high alarm.
I32 aprisaXETxADCChTwoHiAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.27.5	Integer32	read-only	Indicates the level at which the transmitter ADC Ch Two voltage too high alarm will be set.
aprisaXETxADCChTwoLoAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.28
I32 aprisaXETxADCChTwoLoAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.28.6	Integer32	read-only	Indicates the level at wLoch the transmitter ADC Ch Two voltage too low will be cleared.
FOU aprisaXETxADCChTwoLoAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.28.4	FourRFAlarmEnabled	read-only	Indicates whether the transmitter ADC Ch Two voltage too low alarm is enabled.
STR aprisaXETxADCChTwoLoAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.1.28.1	DisplayString	read-only	The name of the transmitter ADC Ch Two voltage too low alarm.
FOU aprisaXETxADCChTwoLoAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.28.3	FourRFAlarmSeverity	read-only	The severity of the transmitter ADC Ch Two voltage too low alarm.
aprisaXETxADCChTwoLoAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.255			The aprisaXETx transmitter ADC Ch Two voltage too High alarm group.
FOU aprisaXETxADCChTwoLoAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.28.2	FourRFAlarmStatus	read-only	The status of the transmitter ADC Ch Two voltage too low alarm.
I32 aprisaXETxADCChTwoLoAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.28.5	Integer32	read-only	Indicates the level at wLoch the transmitter ADC Ch Two voltage too low alarm will be set.
aprisaXETxADCChZeroHiAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.23
I32 aprisaXETxADCChZeroHiAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.23.6	Integer32	read-only	Indicates the level at which the transmitter ADC Ch Zero voltage too high will be cleared.
FOU aprisaXETxADCChZeroHiAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.23.4	FourRFAlarmEnabled	read-only	Indicates whether the transmitter ADC Ch Zero voltage too high alarm is enabled.
STR aprisaXETxADCChZeroHiAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.1.23.1	DisplayString	read-only	The name of the transmitter ADC Ch Zero voltage too high alarm.
FOU aprisaXETxADCChZeroHiAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.23.3	FourRFAlarmSeverity	read-only	The severity of the transmitter ADC Ch Zero voltage too high alarm.
aprisaXETxADCChZeroHiAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.250			The aprisaXETx transmitter ADC Ch Zero voltage too high alarm group.
FOU aprisaXETxADCChZeroHiAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.23.2	FourRFAlarmStatus	read-only	The status of the transmitter ADC Ch Zero voltage too high alarm.
I32 aprisaXETxADCChZeroHiAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.23.5	Integer32	read-only	Indicates the level at which the transmitter ADC Ch Zero voltage too high alarm will be set.
aprisaXETxADCChZeroLoAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.24
I32 aprisaXETxADCChZeroLoAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.24.6	Integer32	read-only	Indicates the level at wLoch the transmitter ADC Ch Zero voltage too low will be cleared.
FOU aprisaXETxADCChZeroLoAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.24.4	FourRFAlarmEnabled	read-only	Indicates whether the transmitter ADC Ch Zero voltage too low alarm is enabled.
STR aprisaXETxADCChZeroLoAlarmName	1.3.6.1.4.1.14817.7.3.1.2.86.1.24.1	DisplayString	read-only	The name of the transmitter ADC Ch Zero voltage too low alarm.
FOU aprisaXETxADCChZeroLoAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.24.3	FourRFAlarmSeverity	read-only	The severity of the transmitter ADC Ch Zero voltage too low alarm.
aprisaXETxADCChZeroLoAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.251			The aprisaXETx transmitter ADC Ch Zero voltage too High alarm group.
FOU aprisaXETxADCChZeroLoAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.24.2	FourRFAlarmStatus	read-only	The status of the transmitter ADC Ch Zero voltage too low alarm.
I32 aprisaXETxADCChZeroLoAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.24.5	Integer32	read-only	Indicates the level at wLoch the transmitter ADC Ch Zero voltage too low alarm will be set.
aprisaXETxAgcHiAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.7
I32 aprisaXETxAgcHiAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.7.5	Integer32	read-only	Indicates the level at which the transmitter AGC too high will be cleared.
FOU aprisaXETxAgcHiAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.7.3	FourRFAlarmEnabled	read-only	Indicates whether the transmitter AGC too high alarm is enabled.
FOU aprisaXETxAgcHiAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.7.2	FourRFAlarmSeverity	read-only	The severity of the transmitter AGC too high alarm.
aprisaXETxAgcHiAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.86			The AprisaXE transmitter AGC too high alarm group.
FOU aprisaXETxAgcHiAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.7.1	FourRFAlarmStatus	read-only	The status of the transmitter AGC too high alarm.
I32 aprisaXETxAgcHiAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.7.4	Integer32	read-only	Indicates the level at which the transmitter AGC too high alarm will be set.
aprisaXETxAgcLoAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.8
I32 aprisaXETxAgcLoAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.8.5	Integer32	read-only	Indicates the level at which the transmitter AGC too low will be cleared.
FOU aprisaXETxAgcLoAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.8.3	FourRFAlarmEnabled	read-only	Indicates whether the transmitter AGC too low alarm is enabled.
FOU aprisaXETxAgcLoAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.8.2	FourRFAlarmSeverity	read-only	The severity of the transmitter AGC too low alarm.
aprisaXETxAgcLoAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.91			The AprisaXE transmitter AGC too low alarm group.
FOU aprisaXETxAgcLoAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.8.1	FourRFAlarmStatus	read-only	The status of the transmitter AGC too low alarm.
I32 aprisaXETxAgcLoAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.8.4	Integer32	read-only	Indicates the level at which the transmitter AGC too low alarm will be set.
C32 aprisaXETxPacketCountEx	1.3.6.1.4.1.14817.7.3.1.2.6.4	Counter32	read-only	The terminal transmitted ethernet packet count (to link).
aprisaXETxPaTempAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.5
I32 aprisaXETxPaTempAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.5.5	Integer32	read-only	Indicates the level at which the transmitter temperature too high will be cleared.
FOU aprisaXETxPaTempAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.5.3	FourRFAlarmEnabled	read-only	Indicates whether the transmitter temperature too high alarm is enabled.
FOU aprisaXETxPaTempAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.5.2	FourRFAlarmSeverity	read-only	The severity of the transmitter temperature too high alarm.
aprisaXETxPaTempAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.76			The AprisaXE transmitter temperature too high alarm group.
FOU aprisaXETxPaTempAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.5.1	FourRFAlarmStatus	read-only	The status of the transmitter temperature too high alarm.
I32 aprisaXETxPaTempAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.5.4	Integer32	read-only	Indicates the level at which the transmitter temperature too high alarm will be set.
aprisaXETxPaTempWarnAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.6
I32 aprisaXETxPaTempWarnAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.6.5	Integer32	read-only	Indicates the level at which the transmitter temperature warning will be cleared.
FOU aprisaXETxPaTempWarnAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.6.3	FourRFAlarmEnabled	read-only	Indicates whether the transmitter temperature warning alarm is enabled.
FOU aprisaXETxPaTempWarnAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.6.2	FourRFAlarmSeverity	read-only	The severity of the transmitter temperature warning alarm.
aprisaXETxPaTempWarnAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.81			The AprisaXE transmitter temperature warning alarm group.
FOU aprisaXETxPaTempWarnAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.6.1	FourRFAlarmStatus	read-only	The status of the transmitter temperature warning alarm.
I32 aprisaXETxPaTempWarnAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.6.4	Integer32	read-only	Indicates the level at which the transmitter temperature warning alarm will be set.
aprisaXETxSynthOutOfLockAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.21
FOU aprisaXETxSynthOutOfLockAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.21.3	FourRFAlarmEnabled	read-only	Indicates whether the TX synth out of lock alarm is enabled.
FOU aprisaXETxSynthOutOfLockAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.21.2	FourRFAlarmSeverity	read-only	The severity of the TX synth out of lock alarm.
aprisaXETxSynthOutOfLockAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.153			The AprisaXE TX Synth out of lock alarm group.
FOU aprisaXETxSynthOutOfLockAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.21.1	FourRFAlarmStatus	read-only	The status of the TX synth out of lock alarm.
aprisaXETxVtuneHiAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.9
I32 aprisaXETxVtuneHiAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.9.5	Integer32	read-only	Indicates the level at which the transmitter VTUNE too high will be cleared.
FOU aprisaXETxVtuneHiAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.9.3	FourRFAlarmEnabled	read-only	Indicates whether the transmitter VTUNE too high alarm is enabled.
FOU aprisaXETxVtuneHiAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.9.2	FourRFAlarmSeverity	read-only	The severity of the transmitter VTUNE too high alarm.
aprisaXETxVtuneHiAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.96			The AprisaXE transmitter VTUNE too high alarm group.
FOU aprisaXETxVtuneHiAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.9.1	FourRFAlarmStatus	read-only	The status of the transmitter VTUNE too high alarm.
I32 aprisaXETxVtuneHiAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.9.4	Integer32	read-only	Indicates the level at which the transmitter VTUNE too high alarm will be set.
aprisaXETxVtuneLoAlarm	1.3.6.1.4.1.14817.7.3.1.2.86.1.10
I32 aprisaXETxVtuneLoAlarmClearThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.10.5	Integer32	read-only	Indicates the level at which the transmitter VTUNE too low will be cleared.
FOU aprisaXETxVtuneLoAlarmEnabled	1.3.6.1.4.1.14817.7.3.1.2.86.1.10.3	FourRFAlarmEnabled	read-only	Indicates whether the transmitter VTUNE too low alarm is enabled.
FOU aprisaXETxVtuneLoAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.86.1.10.2	FourRFAlarmSeverity	read-only	The severity of the transmitter VTUNE too low alarm.
aprisaXETxVtuneLoAlarmsGroup	1.3.6.1.4.1.14817.7.3.1.1.101			The AprisaXE transmitter VTUNE too low alarm group.
FOU aprisaXETxVtuneLoAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.86.1.10.1	FourRFAlarmStatus	read-only	The status of the transmitter VTUNE too low alarm.
I32 aprisaXETxVtuneLoAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.86.1.10.4	Integer32	read-only	Indicates the level at which the transmitter VTUNE too low alarm will be set.
NUM aprisaXEUncorrectableErrorCount	1.3.6.1.4.1.14817.7.3.1.2.6.2	FourRFErrorCounter	read-only	The terminal uncorrectable error count.
INT aprisaXEV24BaudRate	1.3.6.1.4.1.14817.7.3.1.2.210.1.3	INTEGER	read-write	Baud Rate from 300 baud to 115200 baud.
APR aprisaXEV24ConnectionID	1.3.6.1.4.1.14817.7.3.1.2.210.1.8	AprisaXEConnectionID	read-write	Associated cross-connect Backplane Connection ID.
INT aprisaXEV24DataBits	1.3.6.1.4.1.14817.7.3.1.2.210.1.5	INTEGER	read-write	No of data bits used, 7 or 8.
FOU aprisaXEV24Loopback	1.3.6.1.4.1.14817.7.3.1.2.210.1.4	FourRFLoopback	read-write	Loopback control on or off for ports.
INT aprisaXEV24ParityBits	1.3.6.1.4.1.14817.7.3.1.2.210.1.7	INTEGER	read-write	No of parity bits used, 0 or 1.
APR aprisaXEV24PortControlSlotIndex	1.3.6.1.4.1.14817.7.3.1.2.210.1.1	AprisaXESlotNumber	read-only	Slot index for V24 Control table.
aprisaXEV24PortControlTable	1.3.6.1.4.1.14817.7.3.1.2.210		not-accessible	Port Control table for V24.
aprisaXEV24PortControlTableEntry	1.3.6.1.4.1.14817.7.3.1.2.210.1		not-accessible	Entries for V24 table.
APR aprisaXEV24PortIndex	1.3.6.1.4.1.14817.7.3.1.2.210.1.2	AprisaXEPortNumber	read-only	Port index for V24 Control table.
INT aprisaXEV24StopBits	1.3.6.1.4.1.14817.7.3.1.2.210.1.6	INTEGER	read-write	No of stop bits used, 1 or 2.
fourRFAprisaXEModule	1.3.6.1.4.1.14817.2.5			MIB for the AprisaXE project

RFC description

Manages configuration and status of 4RF Aprisa XE narrowband IP radio modem systems.

Start monitoring 4RF Aprisa XE point-to-point microwave/radio terminal with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download APRISAXE-MIB-4RF