All MIBs › APRISAXE-MIB-4RF › aprisaXETx28VLoAlarmEnabled
aprisaXETx28VLoAlarmEnabled
Module: APRISAXE-MIB-4RF
OID (symbolic): APRISAXE-MIB-4RF::aprisaXETx28VLoAlarmEnabled
OID (numeric): 1.3.6.1.4.1.14817.7.3.1.2.86.1.20.3
Node type: OBJECT-TYPE
Type: FourRFAlarmEnabled
Access: read-only
Description: Indicates whether the transmitter 28V voltage too low alarm is enabled.
What is aprisaXETx28VLoAlarmEnabled?
Indicates whether monitoring for a too-low 28V supply voltage on the transmitter is currently active. When enabled, the system will raise an alarm if the 28V rail falls below the configured threshold.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.14817.7.3.1.2.86.1.20.3 snmpwalk -v2c -c public <target> APRISAXE-MIB-4RF::aprisaXETx28VLoAlarmEnabled
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.14817.7.3.1.2.86.1.20.3.1 snmpget -v2c -c public <target> APRISAXE-MIB-4RF::aprisaXETx28VLoAlarmEnabled.1
Start monitoring 4RF Aprisa XE point-to-point microwave/radio terminal with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APRISAXE-MIB-4RF::aprisaXETx28VLoAlarmEnabled OID value, configure state conditions and alerts, and monitor any 4RF Aprisa XE point-to-point microwave/radio terminal from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.14817 | fourRFRoot | MIB-4RF |
| 1.3.6.1.4.1.14817.7 | fourRFExperimental | MIB-4RF |
| 1.3.6.1.4.1.14817.7.3 | fourRFAprisaXE | PRODUCTS-MIB-4RF |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.14817.7.3.1 | aprisaXEConfig | APRISAXE-MIB-4RF |
| 1.3.6.1.4.1.14817.7.3.1.2 | aprisaXEObjects | APRISAXE-MIB-4RF |
| 1.3.6.1.4.1.14817.7.3.1.2.86 | aprisaXELinkAlarms | APRISAXE-MIB-4RF |
| 1.3.6.1.4.1.14817.7.3.1.2.86.1 | aprisaXETransmitterAlarms | APRISAXE-MIB-4RF |
| 1.3.6.1.4.1.14817.7.3.1.2.86.1.20 | aprisaXETx28VLoAlarm | APRISAXE-MIB-4RF |
| 1.3.6.1.4.1.14817.7.3.1.2.86.1.20.3 | aprisaXETx28VLoAlarmEnabled | APRISAXE-MIB-4RF |