APRISAXE-EVENTS-4RF

All MIBs › APRISAXE-EVENTS-4RF

Organization: www.4rf.com

Last Updated: 2007-04-30

Category: 4RF Aprisa Radio Backhaul

Description: Defines trap and event notification objects for 4RF Aprisa XE point-to-point radio links.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is APRISAXE-EVENTS-4RF?

APRISAXE-EVENTS-4RF is 4RF's Event MIB defining trap and notification objects for alarms and hardware card events on their Aprisa XE point-to-point microwave/radio link products. It exposes alarm status, severity, value, and threshold, plus per-slot card expected-vs-installed presence, status, and port data. Its monitoring emphasis is strongly hardware-fault oriented, using card presence mismatches, per-slot/port card status, and threshold-breach alarms to detect radio hardware faults in near real time via traps. It is a companion event/trap module to the main APRISAXE-MIB-4RF and shares textual conventions from APRISAXE-TC-4RF. It is deployed on point-to-point wireless backhaul links in utility, oil and gas, or telecom networks, where trap-driven alarm monitoring is critical for remote unmanned radio sites. Engineers can download the APRISAXE-EVENTS-4RF file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in APRISAXE-EVENTS-4RF. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

4RF Aprisa XE point-to-point radio/microwave terminal

Monitoring Examples

aprisaXEEventAlarmStatus, aprisaXEEventAlarmSeverity, and aprisaXEEventAlarmThreshold together let an NMS raise a critical alert when a radio parameter crosses its configured threshold. aprisaXEEventCardExpected versus aprisaXEEventCardInstalled per aprisaXEEventCardSlot reveals a card that has been removed or failed compared to what should be installed, and aprisaXEEventCardStatus/aprisaXEEventCardPort pinpoint which port on which card raised the fault.

What Can Be Monitored

alarm status/severity
alarm value vs threshold
expected vs installed card presence
card status per slot/port
MIB/characterisation status

Imported Objects

From APRISAXE-MIB-4RF

aprisaXEEvents	OBJECT-IDENTITY
aprisaXEObjects	OBJECT-IDENTITY

From APRISAXE-TC-4RF

AprisaXEAlarmType
AprisaXECardType
AprisaXEDataStatus
AprisaXEPortNumber
AprisaXESlotNumber

From COMMON-TC-4RF

FourRFAlarmEnabled
FourRFAlarmPresent
FourRFAlarmSeverity
FourRFAlarmStatus
FourRFHardwareVersion
FourRFImageVersion

From MIB-4RF

fourRFModules

OBJECT-IDENTITY

From PRODUCTS-MIB-4RF

fourRFAprisaXE

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
aprisaXE4RFEventModule	1.3.6.1.4.1.14817.2.7			Event MIB for the AprisaXE project
aprisaXEEventValues	1.3.6.1.4.1.14817.7.3.1.2.1000
FOU aprisaXEEventAlarmStatus	1.3.6.1.4.1.14817.7.3.1.2.1000.1	FourRFAlarmPresent	accessible-for-notify	The status of an alarm event.
FOU aprisaXEEventAlarmSeverity	1.3.6.1.4.1.14817.7.3.1.2.1000.2	FourRFAlarmSeverity	accessible-for-notify	The severity of the alarm.
I32 aprisaXEEventAlarmValue	1.3.6.1.4.1.14817.7.3.1.2.1000.3	Integer32	accessible-for-notify	Indicatesthe current value.
I32 aprisaXEEventAlarmThreshold	1.3.6.1.4.1.14817.7.3.1.2.1000.4	Integer32	accessible-for-notify	Indicates the level at which the alarm was set.
APR aprisaXEEventAlarmType	1.3.6.1.4.1.14817.7.3.1.2.1000.5	AprisaXEAlarmType	accessible-for-notify	The alarm type.
APR aprisaXEEventCardExpected	1.3.6.1.4.1.14817.7.3.1.2.1000.6	AprisaXECardType	accessible-for-notify	The type of MUX card expected in a slot.
APR aprisaXEEventCardInstalled	1.3.6.1.4.1.14817.7.3.1.2.1000.7	AprisaXECardType	accessible-for-notify	The type of MUX card found in a slot.
APR aprisaXEEventCardSlot	1.3.6.1.4.1.14817.7.3.1.2.1000.8	AprisaXESlotNumber	accessible-for-notify	The slot containing the unexpected card.
FOU aprisaXEEventCardStatus	1.3.6.1.4.1.14817.7.3.1.2.1000.9	FourRFAlarmPresent	accessible-for-notify	Indicates whether the alarm is present or has been cleared.
APR aprisaXEEventCardPort	1.3.6.1.4.1.14817.7.3.1.2.1000.10	AprisaXEPortNumber	accessible-for-notify	The port reporting the event.
APR aprisaXEEventCharacterisationStatus	1.3.6.1.4.1.14817.7.3.1.2.1000.15	AprisaXEDataStatus	accessible-for-notify	Indicates whether the characterisation is valid or invalid.
APR aprisaXEEventMibStatus	1.3.6.1.4.1.14817.7.3.1.2.1000.16	AprisaXEDataStatus	accessible-for-notify	Indicates whether the MIB is valid or invalid.
aprisaXELinkAlarmsEvents	1.3.6.1.4.1.14817.7.3.1.3.1			The events for the link alarms.
aprisaXELinkAlarmsEventsV2	1.3.6.1.4.1.14817.7.3.1.3.1.0			The SNMPv2 events for the link alarms.
NTF aprisaXEThresholdAlarmEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.1			Event indicating a change in state of a threshold alarm. It will be sent whenever the status of the alarm changes from noAlarm to alarmPresent and vice versa.
NTF aprisaXERxSynthOutOfLockAlarmEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.10			Event indicating a change in state of the Rx synthesizer out of lock alarm. It will be sent whenever the status of the alarm changes from noAlarm to alarmPresent and vice versa.
NTF aprisaXEAlarmRxCDataEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.11			Event indicating a change in state of the receiver characterisation data alarm.
NTF aprisaXEAlarmRx12VStatusEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.12			Event indicating a change in state of the Rx synthesizer out of lock alarm. It will be sent whenever the status of the alarm changes from noAlarm to alarmPresent and vice versa.
NTF aprisaXEAlarmRxOffEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.13			Event indicating a change in state of receiver, when it is turned on or off. It will be sent whenever the status of the alarm changes from noAlarm to alarmPresent and vice versa.
NTF aprisaXEAlarmRxBadMibEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.14			Event indicating a change in state of the receiver MIB data alarm.
NTF aprisaXEAlarmTxCDataEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.20			Event indicating a change in state of the transmitter characterisation data alarm.
NTF aprisaXEAlarmTxSynthOutOfLockEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.21			Event indicating a change in state of the transmitter synthesiser out of lock alarm.
NTF aprisaXEAlarmTx28VStatusEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.22			Event indicating a change in state of the transmitter 28V supply status alarm.
NTF aprisaXEAlarmTx11VStatusEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.23			Event indicating a change in state of the transmitter 11V supply status alarm.
NTF aprisaXEAlarmTx5VStatusEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.24			Event indicating a change in state of the transmitter 5V digital supply status alarm.
NTF aprisaXEAlarmTxAmplifierBalanceEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.25			Event indicating a change in state of the transmitter amplifier balance status alarm.
NTF aprisaXEAlarmTxBadMibEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.26			Event indicating a change in state of the transmitter MIB data alarm.
NTF aprisaXEAlarmTxNeg5VStatusEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.27			Event indicating a change in state of the transmitter Negative 5V digital supply status alarm.
NTF aprisaXEModemSyncEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.30			Event indicating a change in state of the modem lock.
NTF aprisaXEModemTDMAlignmentEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.31			Event indicating a change in state of the modem TDM alignment.
NTF aprisaXEModemDemodAlignmentEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.32			Event indicating a change in state of the modem demodulator alignment.
NTF aprisaXEModemRefAStatusEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.33			Event indicating a change in state of the Ref A clock.
NTF aprisaXEModemRefBStatusEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.34			Event indicating a change in state of the Ref B clock.
NTF aprisaXEModemUCEPresentEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.35			Event indicating the presence of uncorrectable errors.
NTF aprisaXEQuadE1LOSEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.40			Event indicating a change in LOS state for a port.
NTF aprisaXEQuadE1AISEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.41			Event indicating a change in AIS state for a port.
NTF aprisaXEQuadE1RAIEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.42			Event indicating a change in RAI state for a port.
NTF aprisaXEQuadE1RMAIEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.43			Event indicating a change in RMAI state for a port.
NTF aprisaXEQuadE1TS16AISEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.44			Event indicating a change in TS16AIS state for a port.
NTF aprisaXEQuadE1TS16LOSEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.45			Event indicating a change in TS16LOS state for a port.
NTF aprisaXEQuadE1LOFEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.46			Event indicating a change in loss of frame state for a port.
NTF aprisaXEFXOCodecOvldEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.50			Event indicating a change in Codec Ovld state for a port.
NTF aprisaXEFXOBillToneOvldEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.51			Event indicating a change in Billing Tone Ovld state for a port.
NTF aprisaXEFXOCurrentOvldEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.52			Event indicating a change in Current Ovld state for a port.
NTF aprisaXEFXOUnplugEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.53			Event indicating a change in Unplug state for a port.
NTF aprisaXEFXSCalibrateErrorEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.60			Event indicating a common mode error during Pro-SLIC initialisation.
NTF aprisaXEFXSDCDCErrorEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.61			Event indicating a DC-DC converter error during Pro-SLIC initialisation
NTF aprisaXEFXSCASLockEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.62			Event indicating the FPGA has not locked onto a CAS frame.
NTF aprisaXEHSSTDMLockEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.70			Event indicating an HSS TDM Lock error.
NTF aprisaXEHSS32MHzResetEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.71			Event indicating a 32MHz clock reset error.
NTF aprisaXEHSSTDMResetEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.72			Event indicating a TDM reset error.
NTF aprisaXEHSSPatternLossEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.73			Event indicating a Pattern Loss error.
NTF aprisaXEHSSRxFifoFullEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.74			Event indicating an Rx FIFO Full error.
NTF aprisaXEHSSRxFifoEmptyEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.75			Event indicating an Rx FIFO Empty error.
NTF aprisaXEHSSTxFifoFullEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.76			Event indicating a Tx FIFO Full error.
NTF aprisaXEHSSTxFifoEmptyEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.77			Event indicating a Tx FIFO Empty error.
NTF aprisaXEHSSRxClockValidEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.78			Event indicating an Rx Clock Valid error.
NTF aprisaXEHSSTxClockValidEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.79			Event indicating a Tx Clock Valid error.
NTF aprisaXEV24ControlLineLossEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.80			Event indicating V24 control line aren't in sync.
NTF aprisaXEUnexpectedCardEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.100			Event indicating an mismatch between the MIB and the installed MUX cards. The radio will not operate correctly if the MIB and MUX cards do not match.
NTF aprisaXECLKSyncEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.110			Event indicating a change in state of the clock sync state.
NTF aprisaXENetClkConfigEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.111			Event indicating a change in state of the network clock config.
NTF aprisaXECharacterisationEEFailEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.120			Event indicating a failed read of characterisation data from EEPROM.
NTF aprisaXEMibEEFailEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.121			Event indicating a failed read of mib data from EEPROM.
NTF aprisaXEMhsbSwitchToStandbyEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.130			Event indicating a Monitored Hot Standby switch to Standby Event.
NTF aprisaXEAlternateImageTableEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.131			Event indicating an Alternate Image Table Event.
NTF aprisaXEDefaultImageTableEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.132			Event indicating a Default Image Table Event.
NTF aprisaXEUploadFailEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.133			Event indicating the failure of the previous upload.
NTF aprisaXEPscDemuxAlignmentEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.140			Event indicating a change in state of the PSC Demux alignment .
NTF aprisaXEPscTDMAlignmentEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.141			Event indicating a change in state of the PSC TDM alignment.
NTF aprisaXEPscMuxAlignmentErrorEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.142			Event indicating if the TDM mux loses alignment to the TDM bus.
NTF aprisaXEPscCompanionTxFailEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.143			Event indicating that the HRSD Companion transmitter has failed.
NTF aprisaXEPscSoftwareOverrideEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.144			Event indicating a software override of the PSC Mode Switch.
NTF aprisaXEPscInvalidSwitchValueEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.145			Event indicating that the PSC Mode Switch value is invalid.
NTF aprisaXEDualE1LOSEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.150			Event indicating a change in LOS state for a port.
NTF aprisaXEDualE1AISEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.151			Event indicating a change in AIS state for a port.
NTF aprisaXESingleE1LOSEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.160			Event indicating a change in LOS state for a port.
NTF aprisaXESingleE1AISEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.161			Event indicating a change in AIS state for a port.
NTF aprisaXEHrsdCompareOidEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.170			Event indicating that an OID failed its comparison check.
NTF aprisaXEHrsdCompanionLostEvent	1.3.6.1.4.1.14817.7.3.1.3.1.0.171			Event indicating that the HRSD Companion Heartbeat is lost.

RFC description

Event and alarm notifications for AprisaXE telecommunications equipment by 4RF Communications.

Start monitoring 4RF Aprisa XE point-to-point microwave/radio terminal with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download APRISAXE-EVENTS-4RF

What Is APRISAXE-EVENTS-4RF?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

RFC description