-- COPYRIGHT NOTICE
-- Copyright (c) Alteon WebSystems, Inc. 2001
-- All rights reserved
-- 
-- HISTORY
-- $Log: tigonBwm.mib $
-- Revision genie_rekha/8 2001/05/25 00:11:10 rekha
-- 	Removed 'other' from enumerations.
-- 
-- Revision genie_rekha/6 2001/05/01 18:18:06 rekha
-- 	Fixed CR11426: Modified policy buffer limit range to 8192-128000.
-- 
-- Revision genie_rekha/4 2001/05/01 00:27:35 rekha
-- 	Fixed CR11422: Remove incorrect range for contract and policy
-- 	tables. The range for these tables should be obtained via the 
-- 	respective MaxEnt MIB objects.
-- 
-- Revision genie_rekha/2 2001/02/08 18:18:02 rekha
-- 	As part of the code cleanup split the Tigon MIB into smaller
-- 	modules. Instead of altswitch.mib these 5 new modules should be
-- 	used.
-- 
-- $EndLog$
-- 
-- Version 10.0.x
--
ALTEON-TS-BWM-MIB DEFINITIONS ::= BEGIN

IMPORTS
    IpAddress, Counter, Gauge 
        FROM RFC1155-SMI
    OBJECT-TYPE
        FROM RFC-1212
    DisplayString
        FROM RFC1213-MIB
    switch 
        FROM ALTEON-ROOT-MIB
    stats, information, operCmds
        FROM ALTEON-TIGON-SWITCH-MIB;

-- Bandwidth Management Group

bwm               OBJECT IDENTIFIER ::= { switch 17 }

bwmGeneralConfig  OBJECT IDENTIFIER ::= { bwm 1 }
bwmPolicyConfig   OBJECT IDENTIFIER ::= { bwm 2 }
bwmContractConfig OBJECT IDENTIFIER ::= { bwm 3 }

bwmStats          OBJECT IDENTIFIER ::= { stats  15 }

bwmCurCfgGenState OBJECT-TYPE
    SYNTAX INTEGER {
	on(2),
	off(3)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The state of BWM in the current configuration block."
    ::= { bwmGeneralConfig 1 }

bwmNewCfgGenState OBJECT-TYPE
    SYNTAX INTEGER {
	on(2),
	off(3)
	}
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The state of BWM in the new configuration block."
    ::= { bwmGeneralConfig 2 }

bwmCurCfgGenEnforcePolicy OBJECT-TYPE
    SYNTAX INTEGER {
	enabled(2),
	disabled(3)
	}
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The state of BWM enforce policy in the current configuration block."
    ::= { bwmGeneralConfig 3 }

bwmNewCfgGenEnforcePolicy OBJECT-TYPE
    SYNTAX INTEGER {
	enabled(2),
	disabled(3)
	}
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The state of BWM enforce policy in the new configuration block."
    ::= { bwmGeneralConfig 4 }

bwmCurCfgGenSmtpUser OBJECT-TYPE
    SYNTAX DisplayString (SIZE(0..127))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The SMTP user name for BWM in the current configuration block."
    ::= { bwmGeneralConfig 5 }
 
bwmNewCfgGenSmtpUser OBJECT-TYPE
    SYNTAX DisplayString (SIZE(0..127))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The SMTP user name for BWM in the new configuration block."
    ::= { bwmGeneralConfig 6 }
 
bwmPolicyTableMaxEnt OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The maximum number of rows in the BWM policy configuration table."
    ::= { bwmPolicyConfig 1 }

bwmCurCfgPolicyTable OBJECT-TYPE
    SYNTAX SEQUENCE OF BwmCurCfgPolicyTableEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The table of BWM traffic policy configuration."
    ::= { bwmPolicyConfig 2 }
 
bwmCurCfgPolicyTableEntry OBJECT-TYPE
    SYNTAX BwmCurCfgPolicyTableEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A row in the BWM traffic policy configuration table."
    INDEX { bwmCurCfgPolicyIndx }
    ::= { bwmCurCfgPolicyTable 1 }
 
BwmCurCfgPolicyTableEntry ::= SEQUENCE {
    bwmCurCfgPolicyIndx       INTEGER,
    bwmCurCfgPolicyTosIn      INTEGER,
    bwmCurCfgPolicyTosOut     INTEGER,
    bwmCurCfgPolicyHard       DisplayString,
    bwmCurCfgPolicySoft       DisplayString,
    bwmCurCfgPolicyResv       DisplayString,
    bwmCurCfgPolicyBuffer     INTEGER
    }
 
bwmCurCfgPolicyIndx OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The index of the row in BWM traffic policy configurations table."
    ::= { bwmCurCfgPolicyTableEntry 1 }
 
bwmCurCfgPolicyTosIn OBJECT-TYPE
    SYNTAX INTEGER (0..255)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This is IP TOS in the profile state of the traffic policy"
    ::= { bwmCurCfgPolicyTableEntry 2 }

bwmCurCfgPolicyTosOut OBJECT-TYPE
    SYNTAX INTEGER (0..255)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This is IP TOS out of profile state of the traffic policy"
    ::= { bwmCurCfgPolicyTableEntry 3 }

bwmCurCfgPolicyHard OBJECT-TYPE
    SYNTAX DisplayString (SIZE(0..5))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The hard speed limit for the traffic policy."
    ::= { bwmCurCfgPolicyTableEntry 4 }
 
bwmCurCfgPolicySoft OBJECT-TYPE
    SYNTAX DisplayString (SIZE(0..5))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The soft speed limit for the traffic policy."
    ::= { bwmCurCfgPolicyTableEntry 5 }
 
bwmCurCfgPolicyResv OBJECT-TYPE
    SYNTAX DisplayString (SIZE(0..5))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The reservation speed limit for the traffic policy."
    ::= { bwmCurCfgPolicyTableEntry 6 }
 
bwmCurCfgPolicyBuffer OBJECT-TYPE
    SYNTAX INTEGER (8192..128000)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The buffer limit for the traffic policy."
    ::= { bwmCurCfgPolicyTableEntry 7 }
 
bwmNewCfgPolicyTable OBJECT-TYPE
    SYNTAX SEQUENCE OF BwmNewCfgPolicyTableEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The table of BWM traffi policy configuration."
    ::= { bwmPolicyConfig 3 }
 
bwmNewCfgPolicyTableEntry OBJECT-TYPE
    SYNTAX BwmNewCfgPolicyTableEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A row in the BWM traffic policy configuration table."
    INDEX   { bwmNewCfgPolicyIndx }
    ::= { bwmNewCfgPolicyTable 1 }
 
BwmNewCfgPolicyTableEntry ::= SEQUENCE {
    bwmNewCfgPolicyIndx       INTEGER,
    bwmNewCfgPolicyTosIn      INTEGER,
    bwmNewCfgPolicyTosOut     INTEGER,
    bwmNewCfgPolicyHard       DisplayString,
    bwmNewCfgPolicySoft       DisplayString,
    bwmNewCfgPolicyResv       DisplayString,
    bwmNewCfgPolicyBuffer     INTEGER,
    bwmNewCfgPolicyDelete     INTEGER
    }

bwmNewCfgPolicyIndx OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The index of the row in BWM traffic policy configurations table."
    ::= { bwmNewCfgPolicyTableEntry 1 }
 
bwmNewCfgPolicyTosIn OBJECT-TYPE
    SYNTAX INTEGER (0..255)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This is IP TOS in the profile state of the traffic policy"
    ::= { bwmNewCfgPolicyTableEntry 2 }

bwmNewCfgPolicyTosOut OBJECT-TYPE
    SYNTAX INTEGER (0..255)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This is IP TOS out of profile state of the traffic policy"
    ::= { bwmNewCfgPolicyTableEntry 3 }

bwmNewCfgPolicyHard OBJECT-TYPE
    SYNTAX DisplayString (SIZE(0..5)) 
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The hard speed limit for the traffic policy."
    ::= { bwmNewCfgPolicyTableEntry 4 }
 
bwmNewCfgPolicySoft OBJECT-TYPE
    SYNTAX DisplayString (SIZE(0..5))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The soft speed limit for the traffic policy."
    ::= { bwmNewCfgPolicyTableEntry 5 }
 
bwmNewCfgPolicyResv OBJECT-TYPE
    SYNTAX DisplayString (SIZE(0..5))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The reservation speed limit for the traffic policy."
    ::= { bwmNewCfgPolicyTableEntry 6 }
 
bwmNewCfgPolicyBuffer OBJECT-TYPE
    SYNTAX INTEGER (8192..128000)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The buffer limit for the traffic policy."
    ::= { bwmNewCfgPolicyTableEntry 7 }
 
bwmNewCfgPolicyDelete OBJECT-TYPE
    SYNTAX INTEGER { 
        other(1),
        delete(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "When set to the value of 2 (delete), the entire row
	 is deleted. When read, other(1) is returned. Setting the value
	 to anything other than 2(delete) has no effect on the state
	 of the row."
    ::= { bwmNewCfgPolicyTableEntry 8 }

-- BWM Contract Config Table
 
bwmContractTableMaxEnt OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The maximum number of rows in the BWM contract configuration table."
    ::= { bwmContractConfig 1 }
 
bwmCurCfgContractTable OBJECT-TYPE
    SYNTAX SEQUENCE OF BwmContractCurCfgTableEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The table of BWM traffic contract configuration."
    ::= { bwmContractConfig 2 }
 
bwmCurCfgContractTableEntry OBJECT-TYPE
    SYNTAX BwmContractCurCfgTableEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A row in the BWM traffic contract configuration table."
    INDEX   { bwmCurCfgContractIndx }
    ::= { bwmCurCfgContractTable 1 }
 
BwmContractCurCfgTableEntry ::= SEQUENCE {
    bwmCurCfgContractIndx       INTEGER,
    bwmCurCfgContractName       DisplayString,
    bwmCurCfgContractState      INTEGER,
    bwmCurCfgContractPolicy     INTEGER,
    bwmCurCfgContractPrec	INTEGER,
    bwmCurCfgContractUseTos	INTEGER,
    bwmCurCfgContractHistory    INTEGER
    }
 
bwmCurCfgContractIndx OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The index of the row in BWM traffic contract configurations table."
    ::= { bwmCurCfgContractTableEntry 1 }
 
bwmCurCfgContractName   OBJECT-TYPE
    SYNTAX DisplayString (SIZE(0..15))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The traffic contract name."
    ::= { bwmCurCfgContractTableEntry 2 }
 
bwmCurCfgContractState OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(2),
        disabled(3)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This is the state of the traffic contract."
    ::= { bwmCurCfgContractTableEntry 3 }
 
bwmCurCfgContractPolicy OBJECT-TYPE
    SYNTAX INTEGER (1..64)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This is policy number of the traffic contract"
    ::= { bwmCurCfgContractTableEntry 4 }
 
bwmCurCfgContractPrec OBJECT-TYPE
    SYNTAX INTEGER (1..255)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The precedence value of the traffic contract"
    ::= { bwmCurCfgContractTableEntry 5 }
 
bwmCurCfgContractUseTos OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(2),
        disabled(3)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Enable/disable the TOS overwrite of the traffic contract."
    ::= { bwmCurCfgContractTableEntry 6 }
 
bwmCurCfgContractHistory OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(2),
        disabled(3)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Enable/disable save contract statistics on the TFTP server
	 of the traffic contract."
    ::= { bwmCurCfgContractTableEntry 7 }
 
bwmNewCfgContractTable OBJECT-TYPE
    SYNTAX SEQUENCE OF BwmContractNewCfgTableEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The table of BWM traffic contract configuration."
    ::= { bwmContractConfig 3 }
 
bwmNewCfgContractTableEntry OBJECT-TYPE
    SYNTAX BwmContractNewCfgTableEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A row in the BWM traffic contract configuration table."
    INDEX { bwmNewCfgContractIndx }
    ::= { bwmNewCfgContractTable 1 }
 
BwmContractNewCfgTableEntry ::= SEQUENCE {
    bwmNewCfgContractIndx       INTEGER,
    bwmNewCfgContractName       DisplayString,
    bwmNewCfgContractState      INTEGER,
    bwmNewCfgContractPolicy     INTEGER,
    bwmNewCfgContractDelete     INTEGER,
    bwmNewCfgContractPrec	INTEGER,
    bwmNewCfgContractUseTos	INTEGER,
    bwmNewCfgContractHistory    INTEGER
    }
 
bwmNewCfgContractIndx OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The index of the row in BWM traffic contract configuration table."
    ::= { bwmNewCfgContractTableEntry 1 }

bwmNewCfgContractName   OBJECT-TYPE
    SYNTAX DisplayString (SIZE(0..16))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The traffic contract name."
    ::= { bwmNewCfgContractTableEntry 2 }
 
bwmNewCfgContractState OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(2),
        disabled(3)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This is the state of the traffic contract."
    ::= { bwmNewCfgContractTableEntry 3 }
 
bwmNewCfgContractPolicy OBJECT-TYPE
    SYNTAX INTEGER (1..64)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This is policy number of the traffic contract"
    ::= { bwmNewCfgContractTableEntry 4 }
 
bwmNewCfgContractDelete OBJECT-TYPE
    SYNTAX INTEGER  {
        other(1),
        delete(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "When set to the value of 2 (delete), the entire row
         is deleted. When read, other(1) is returned. Setting the value
         to anything other than 2(delete) has no effect on the state
         of the row."
    ::= { bwmNewCfgContractTableEntry 5 }
 
bwmNewCfgContractPrec OBJECT-TYPE
    SYNTAX INTEGER (1..255)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The precedence value of the traffic contract"
    ::= { bwmNewCfgContractTableEntry 6 }
 
bwmNewCfgContractUseTos OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(2),
        disabled(3)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Enable/disable the TOS overwrite of the traffic contract."
    ::= { bwmNewCfgContractTableEntry 7 }
 
bwmNewCfgContractHistory OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(2),
        disabled(3)
    }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Enable/disable save contract statistics on the TFTP server of the 
         traffic contract."
    ::= { bwmNewCfgContractTableEntry 8 }
 
-- Statistics

-- BWM Traffic Contract Statistics Table
 
bwmStatTcTable  OBJECT-TYPE
    SYNTAX SEQUENCE OF BwmStatTcEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The table of Bandwidth Management Traffic Contract statistics." 
    ::= { bwmStats 1 }
 
bwmStatTcEntry OBJECT-TYPE
    SYNTAX BwmStatTcEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A row in the BWM traffic contract table."
    INDEX { bwmStatTcContractIndex }
    ::= { bwmStatTcTable 1 }

BwmStatTcEntry ::= SEQUENCE {
    bwmStatTcContractIndex     INTEGER,
    bwmStatTcName              DisplayString,
    bwmStatTcOutoct            Counter,
    bwmStatTcOutdisoct         Counter,
    bwmStatTcBufferUsed        Counter,
    bwmStatTcBufferMax         Counter
    }
 
bwmStatTcContractIndex OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The contract queue number for which the statistics apply."
    ::= { bwmStatTcEntry 1 }
 
bwmStatTcName OBJECT-TYPE
    SYNTAX DisplayString (SIZE(0..15))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The name of the traffic contract queue."
    ::= { bwmStatTcEntry 2 }
 
bwmStatTcOutoct OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of octets sent out from the traffic contract queue."
    ::= { bwmStatTcEntry 3 }
 
bwmStatTcOutdisoct OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of octets dropped from the traffic contract queue."
    ::= { bwmStatTcEntry 4 }
 
bwmStatTcBufferUsed OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of buffers used by the traffic contract queue."
    ::= { bwmStatTcEntry 5 }
 
bwmStatTcBufferMax OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of buffers assigned to the traffic contract queue."
    ::= { bwmStatTcEntry 6 }
 
-- BWM Traffic Contract Rate Statistics Table
 
bwmStatTcrTable  OBJECT-TYPE
    SYNTAX SEQUENCE OF BwmStatTcrEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The table of Bandwidth Management Traffic Contract Rate statistics."
    ::= { bwmStats 2 }
 
bwmStatTcrEntry OBJECT-TYPE
    SYNTAX BwmStatTcrEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A row in the BWM traffic contract rate table."
    INDEX { bwmStatTcrContractIndex }
    ::= { bwmStatTcrTable 1 }
 
BwmStatTcrEntry ::= SEQUENCE {
    bwmStatTcrContractIndex     INTEGER,
    bwmStatTcrName              DisplayString,
    bwmStatTcrRate              INTEGER,
    bwmStatTcrOutoct            Counter,
    bwmStatTcrOutdisoct         Counter,
    bwmStatTcrBufferUsed        Counter,
    bwmStatTcrBufferMax         Counter
    }
 
bwmStatTcrContractIndex OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The contract queue number for which the statistics apply."
    ::= { bwmStatTcrEntry 1 }
 
bwmStatTcrName OBJECT-TYPE
    SYNTAX DisplayString (SIZE(0..15))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The name of the traffic contract queue."
    ::= { bwmStatTcrEntry 2 }
 
bwmStatTcrRate OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The rate of octets sent out from the traffic contract queue."
    ::= { bwmStatTcrEntry 3 }
 
bwmStatTcrOutoct OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The of octets sent out from the traffic contract queue."
    ::= { bwmStatTcrEntry 4 }
 
bwmStatTcrOutdisoct OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of octets dropped from the traffic contract queue."
    ::= { bwmStatTcrEntry 5 }

bwmStatTcrBufferUsed OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of buffers used by the traffic contract queue."
    ::= { bwmStatTcrEntry 6 }
 
bwmStatTcrBufferMax OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of buffers assigned to the traffic contract queue."
    ::= { bwmStatTcrEntry 7 }

-- BWM Switch Port Traffic Contract Statistics Table
 
bwmStatSpTcTable  OBJECT-TYPE
    SYNTAX SEQUENCE OF BwmStatSpTcEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The table of BWM Switch Port Traffic Contract statistics."
    ::= { bwmStats 3 }
 
bwmStatSpTcEntry OBJECT-TYPE
    SYNTAX BwmStatSpTcEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
         "A row in the BWM SP traffic contract table."
    INDEX   { bwmStatSpTcPortIndex, bwmStatSpTcContractIndex }
    ::= { bwmStatSpTcTable 1 }
 
BwmStatSpTcEntry ::= SEQUENCE {
    bwmStatSpTcPortIndex          INTEGER,
    bwmStatSpTcContractIndex      INTEGER,
    bwmStatSpTcName               DisplayString,
    bwmStatSpTcOutoct             Counter,
    bwmStatSpTcOutdisoct          Counter,
    bwmStatSpTcBufferUsed         Counter,
    bwmStatSpTcBufferMax          Counter
    }
 
bwmStatSpTcPortIndex OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The Switch Port number for which the statistics apply."
    ::= { bwmStatSpTcEntry 1 }
 
bwmStatSpTcContractIndex OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The contract queue number for which the statistics apply."
    ::= { bwmStatSpTcEntry 2 }
 
bwmStatSpTcName OBJECT-TYPE
    SYNTAX DisplayString (SIZE(0..15))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The name of the traffic contract queue."
    ::= { bwmStatSpTcEntry 3 }
 
bwmStatSpTcOutoct OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of octets sent out from the traffic contract queue."
    ::= { bwmStatSpTcEntry 4 }
 
bwmStatSpTcOutdisoct OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of octets dropped from the traffic contract queue."
    ::= { bwmStatSpTcEntry 5 }
 
bwmStatSpTcBufferUsed OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of buffers used by the traffic contract queue."
    ::= { bwmStatSpTcEntry 6 }
 
bwmStatSpTcBufferMax OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of buffers assigned to the traffic contract queue."
    ::= { bwmStatSpTcEntry 7 }
 
-- BWM Switch Port Traffic Contract Rate Statistics Table
 
bwmStatSpTcrTable  OBJECT-TYPE
    SYNTAX SEQUENCE OF BwmStatSpTcrEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The table of Bandwidth Management Switch Port Traffic Contract Rate 
         statistics."
    ::= { bwmStats 4 }
 
bwmStatSpTcrEntry OBJECT-TYPE
    SYNTAX BwmStatSpTcrEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A row in the BWM traffic contract rate table."
    INDEX { bwmStatSpTcrPortIndex, bwmStatSpTcrContractIndex }
    ::= { bwmStatSpTcrTable 1 }
 
BwmStatSpTcrEntry ::= SEQUENCE {
    bwmStatSpTcrPortIndex          INTEGER,
    bwmStatSpTcrContractIndex      INTEGER,
    bwmStatSpTcrName               DisplayString,
    bwmStatSpTcrRate               INTEGER,
    bwmStatSpTcrOutoct             Counter,
    bwmStatSpTcrOutdisoct          Counter,
    bwmStatSpTcrBufferUsed         Counter,
    bwmStatSpTcrBufferMax          Counter
    }
 
bwmStatSpTcrPortIndex OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The switch port number for which the statistics apply."
    ::= { bwmStatSpTcrEntry 1 }
 
bwmStatSpTcrContractIndex OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The contract queue number for which the statistics apply."
    ::= { bwmStatSpTcrEntry 2 }
 
bwmStatSpTcrName OBJECT-TYPE
    SYNTAX DisplayString (SIZE(0..15))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The name of the traffic contract queue."
    ::= { bwmStatSpTcrEntry 3 }
 
bwmStatSpTcrRate OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The rate of octets sent out from the traffic contract queue."
    ::= { bwmStatSpTcrEntry 4 }
 
bwmStatSpTcrOutoct OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The of octets sent out from the traffic contract queue."
    ::= { bwmStatSpTcrEntry 5 }
 
bwmStatSpTcrOutdisoct OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of octets dropped from the traffic contract queue."
    ::= { bwmStatSpTcrEntry 6 }
 
bwmStatSpTcrBufferUsed OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of buffers used by the traffic contract queue."
    ::= { bwmStatSpTcrEntry 7 }
 
bwmStatSpTcrBufferMax OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of buffers assigned to the traffic contract queue."
    ::= { bwmStatSpTcrEntry 8 }

-- Bandwidth Management - Operational Commands
  
bwmOper           OBJECT IDENTIFIER ::= { operCmds 2 }

bwmOperSendSMTP OBJECT-TYPE
    SYNTAX INTEGER {
	other(1),
	send(2)
	}
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This is an action object to send BWM history to SMTP server. 
         other(1) is returned when read."
    ::= { bwmOper 1 }

END