DES1228B1ME-L3MGMT-MIB

All MIBs › DES1228B1ME-L3MGMT-MIB

Organization: D-Link, Inc.

Last Updated: 2009-11-07

Category: Routing Protocols, Vendor: D-Link

Description: Manages L3 routing and IP management features for D-Link DES-1228B1ME smart switch.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DES1228B1ME-L3MGMT-MIB?

DES1228B1ME-L3MGMT-MIB is a D-Link vendor MIB providing Layer 3 network management structure for the D-Link DES-1228B1ME smart switch, part of D-Link's small/medium business switch line. It defines the enterprise object tree for exposing IP routing and Layer 3 management data on this specific switch model. Because it is a management-structure MIB with no populated sample objects visible here, it is used for monitoring the software configuration status of L3 features (IP interfaces, static routes) on the switch alongside standard interface and system health objects from MIB-II. It is built as a proprietary enterprise extension layered on top of standard MIB-II and typically alongside a companion L2 management MIB for the same switch. It is deployed on D-Link DES-1228B1ME desktop/rack smart switches in small business or branch office network environments. Engineers can download the DES1228B1ME-L3MGMT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in DES1228B1ME-L3MGMT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

D-Link DES-1228B1ME smart switch

Monitoring Examples

An administrator managing a DES-1228B1ME would poll the L3 management tree defined here alongside standard ifTable entries to confirm IP interface addressing and routing configuration are correctly applied on the switch. Since the switch is a smart switch with limited L3 capability, monitoring typically focuses on confirming the management VLAN's IP interface is reachable and that any configured static routes remain present after a reboot. This MIB would be polled together with the switch's L2 MIB and MIB-II system group to build a full picture of switch health and configuration.

What Can Be Monitored

IP interface configuration
L3 routing/static route status
management VLAN reachability
switch system status (via MIB-II)

Imported Objects

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
PhysAddress
RowStatus
TEXTUAL-CONVENTION
TimeStamp
TruthValue

From SWPRIMGMT-DES1228ME-MIB

des1228MEv2

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
swL3MgmtMIB	1.3.6.1.4.1.171.11.116.2.3			The Structure of Layer 3 Network Management Information for enterprise.
swL3DevMgmt	1.3.6.1.4.1.171.11.116.2.3.1
swL3IpMgmt	1.3.6.1.4.1.171.11.116.2.3.2
swL3IpCtrlMgmt	1.3.6.1.4.1.171.11.116.2.3.2.1
swL3IpCtrlTable	1.3.6.1.4.1.171.11.116.2.3.2.1.3		not-accessible	This table contains IP interface information.
swL3IpCtrlEntry	1.3.6.1.4.1.171.11.116.2.3.2.1.3.1		not-accessible	A list of information about a specific IP interface.
STR swL3IpCtrlInterfaceName	1.3.6.1.4.1.171.11.116.2.3.2.1.3.1.1	DisplayString	read-only	This object indicates the name of the IP interface.
ADR swL3IpCtrlIpv6LinkLocalAddress	1.3.6.1.4.1.171.11.116.2.3.2.1.3.1.14	Ipv6Address	read-only	The IPv6 link local address for this interface.
INT swL3IpCtrlIpv6LinkLocalPrefixLen	1.3.6.1.4.1.171.11.116.2.3.2.1.3.1.15	INTEGER	read-only	The IPv6 prefix length for this IPv6 link local address.
INT swL3IpCtrlIpv6LinkLocalAutoState	1.3.6.1.4.1.171.11.116.2.3.2.1.3.1.17	INTEGER	read-write	The state of the IPv6 link local auto.
INT swL3IpCtrlIpDhcpOption12State	1.3.6.1.4.1.171.11.116.2.3.2.1.3.1.22	INTEGER	read-write	Enable or disable insertion of option 12 in the DHCPDISCOVER and DHCPREQUEST message.
STR swL3IpCtrlIpDhcpOption12HostName	1.3.6.1.4.1.171.11.116.2.3.2.1.3.1.23	DisplayString	read-write	Specify the host name to be inserted in the DHCPDISCOVER and DHCPREQUEST message. The specified host name must start with a letter, end with a letter or digit, and have only letters, digits, and hyphen as interior characters; the maximal length is 63. By default, the host name is empty. When set an empty host name, means to clear the host name setting and use the default value to encode option 12.
swL3Ipv6CtrlTable	1.3.6.1.4.1.171.11.116.2.3.2.1.4		not-accessible	This table contains IPv6 information of an IP interface.
swL3Ipv6CtrlEntry	1.3.6.1.4.1.171.11.116.2.3.2.1.4.1		not-accessible	A list of IPv6 information about a specific IP interface.
STR swL3Ipv6CtrlInterfaceName	1.3.6.1.4.1.171.11.116.2.3.2.1.4.1.1	DisplayString	read-only	This object indicates the name of the IP interface.
INT swL3Ipv6CtrlMaxReassmblySize	1.3.6.1.4.1.171.11.116.2.3.2.1.4.1.2	INTEGER	read-only	Maximum Reassembly Size of the IP interface.
U32 swL3Ipv6CtrlNsRetransTimer	1.3.6.1.4.1.171.11.116.2.3.2.1.4.1.3	Unsigned32	read-write	Neighbor solicitation's retransmit timer. The unit is set in milliseconds.
swL3Ipv6AddressCtrlTable	1.3.6.1.4.1.171.11.116.2.3.2.1.5		not-accessible	This table contains IPv6 address information for each IP interface.
swL3Ipv6AddressCtrlEntry	1.3.6.1.4.1.171.11.116.2.3.2.1.5.1		not-accessible	A list of information about a specific IPv6 address.
STR swL3Ipv6AddressCtrlInterfaceName	1.3.6.1.4.1.171.11.116.2.3.2.1.5.1.1	DisplayString	read-only	This object indicates the name of the IP interface.
ADR swL3Ipv6Address	1.3.6.1.4.1.171.11.116.2.3.2.1.5.1.2	Ipv6Address	read-only	Specify the IPv6 address.
INT swL3Ipv6AddressCtrlPrefixLen	1.3.6.1.4.1.171.11.116.2.3.2.1.5.1.3	INTEGER	read-only	Indicates the prefix length of this IPv6 address.
ROW swL3Ipv6AddressCtrlState	1.3.6.1.4.1.171.11.116.2.3.2.1.5.1.8	RowStatus	read-create	This variable displays the status of the entry. The status is used for creating, modifying, and deleting instances of the objects in this table.
INT swL3IpCtrlAllIpIfState	1.3.6.1.4.1.171.11.116.2.3.2.1.7	INTEGER	read-write	This object indicates all interface function state of the device.

RFC description

Manages Layer 3 network configuration on D-Link DES1228 switches including IP, IPv6, and DHCP settings.

Start monitoring D-Link smart switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DES1228B1ME-L3MGMT-MIB

What Is DES1228B1ME-L3MGMT-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description