ADTRAN-ATLAS890-FRONTPANEL-MIB

All MIBs › ADTRAN-ATLAS890-FRONTPANEL-MIB

Category: Vendor: ADTRAN

Description: Manages front panel display and LED status indicators on the ADTRAN ATLAS 890 multiservice access device.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ADTRAN-ATLAS890-FRONTPANEL-MIB?

ADTRAN-ATLAS890-FRONTPANEL-MIB manages the front-panel display and LED status indicators on the ADTRAN ATLAS 890 multiservice access device, a T1/E1 and multiservice WAN access platform. It exposes per-slot/per-line front-panel status objects covering channel and module line (CL/ML) status, online state, test mode, and link status as reflected on the unit's physical front panel. For monitoring, this MIB is used to check hardware-level operational status of the device's line cards/modules — whether a channel or module line is online, in test mode, or showing a link/status fault — giving a software-visible proxy for what a technician would otherwise see by looking at physical LEDs. There is no strong indication of dependency on other standard MIBs; it is a self-contained enterprise extension covering physical presentation state. It is deployed on ADTRAN ATLAS 890 access devices used for T1/E1/multiservice WAN access at branch or aggregation sites. Network engineers evaluating or troubleshooting this functionality can download the ADTRAN-ATLAS890-FRONTPANEL-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ADTRAN-ATLAS890-FRONTPANEL-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ADTRAN ATLAS 890 multiservice access device

Monitoring Examples

An administrator would poll adATLAS890FpnlCLTable entries — indexed by adATLAS890FpnlCLIndex — to read adATLAS890FpnlCLStatus, adATLAS890FpnlCLOnline, adATLAS890FpnlCLTest, and adATLAS890FpnlCLLink, and similarly poll adATLAS890FpnlMLTable for module-line status via adATLAS890FpnlMLStatus and adATLAS890FpnlMLOnline. If adATLAS890FpnlCLLink reports down while adATLAS890FpnlCLOnline still shows the channel as active, that combination flags a physical line fault on a specific channel that needs on-site attention, mirroring what a red LED on the front panel would indicate.

What Can Be Monitored

channel line online/status state
channel test mode
channel link status
module line online/status state

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

enterprises

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
adtran	1.3.6.1.4.1.664
adMgmt	1.3.6.1.4.1.664.2
adATLASmg	1.3.6.1.4.1.664.2.154
adATLAS890mg	1.3.6.1.4.1.664.2.154.6
adATLAS890Fpnl	1.3.6.1.4.1.664.2.154.6.1
adATLAS890FpnlLeds	1.3.6.1.4.1.664.2.154.6.1.1
adATLAS890FpnlContLeds	1.3.6.1.4.1.664.2.154.6.1.1.1
adATLAS890FpnlCLTable	1.3.6.1.4.1.664.2.154.6.1.1.1.1		not-accessible	The Controller LED Table.
adATLAS890FpnlCLEntry	1.3.6.1.4.1.664.2.154.6.1.1.1.1.1		not-accessible	An entry in the Controller LED Table.
INT adATLAS890FpnlCLIndex	1.3.6.1.4.1.664.2.154.6.1.1.1.1.1.1	INTEGER	read-only	This variable indicates which slot is selected on the ATLAS 890 Product. Slot 0 indicates the Active Controller. Slot 18 indicates the standy (redundant) controller. These slot numbers are unrelated to the physical slots A and B.
INT adATLAS890FpnlCLStatus	1.3.6.1.4.1.664.2.154.6.1.1.1.1.1.2	INTEGER	read-only	This variable indicates the status of the controller card located in the slot determined by the CLIndex variable. The choices for this variable are Number State Status ------ ----- ------ 1 OK Green 2 Warning Yellow 3 Error Red 4 Flash. Green Flash. Green 5 Flash. Yellow Flash. Yellow 6 Flash. Red Flash. Red 7 Off Off
INT adATLAS890FpnlCLOnline	1.3.6.1.4.1.664.2.154.6.1.1.1.1.1.3	INTEGER	read-only	This variable indicates whether the controller card located in the slot determined by the CLIndex is online or offline. The choices for this variable are Number State Status ------ ----- ------ 1 OK Green 2 Warning Yellow 3 Error Red 4 Flash. Green Flash. Green 5 Flash. Yellow Flash. Yellow 6 Flash. Red Flash. Red 7 Off Off
INT adATLAS890FpnlCLTest	1.3.6.1.4.1.664.2.154.6.1.1.1.1.1.4	INTEGER	read-only	This variable indicates whether the controller card located in the slot determined by the CLIndex is in a test mode or not. The choices for this variable are Number State Status ------ ----- ------ 1 Test in Progress Yellow 2 Flashing Flashing Yellow 3 Off Off
INT adATLAS890FpnlCLLink	1.3.6.1.4.1.664.2.154.6.1.1.1.1.1.5	INTEGER	read-only	This variable indicates the link status of the controller card located in the slot determined by the CLIndex. The choices for this variable are Number State Status ------ ----- ------ 1 Linked Green 2 Flashing??? Flashing Green 3 Off Off
adATLAS890FpnlModLeds	1.3.6.1.4.1.664.2.154.6.1.1.2
adATLAS890FpnlMLTable	1.3.6.1.4.1.664.2.154.6.1.1.2.1		not-accessible	The Module LED Table.
adATLAS890FpnlMLEntry	1.3.6.1.4.1.664.2.154.6.1.1.2.1.1		not-accessible	An entry in the Module LED Table.
INT adATLAS890FpnlMLIndex	1.3.6.1.4.1.664.2.154.6.1.1.2.1.1.1	INTEGER	read-only	This variable indicates which slot is selected on the ATLAS Product. The number of this variable is the same as the number of the slot on the ATLAS Product.
INT adATLAS890FpnlMLStatus	1.3.6.1.4.1.664.2.154.6.1.1.2.1.1.2	INTEGER	read-only	This variable indicates the status of the card located in the slot determined by the MLIndex variable. The choices for this variable are Number State Status ------ ----- ------ 1 OK Green 2 Warning Yellow 3 Error Red 4 Flash. Green Flash. Green 5 Flash. Yellow Flash. Yellow 6 Flash. Red Flash. Red 7 Off Off
INT adATLAS890FpnlMLOnline	1.3.6.1.4.1.664.2.154.6.1.1.2.1.1.3	INTEGER	read-only	This variable indicates whether the card located in the slot determined by the MLIndex is online or offline. The choices for this variable are Number State Status ------ ----- ------ 1 Online Green 2 Flashing Flashing Green 3 Offline Off
INT adATLAS890FpnlMLTest	1.3.6.1.4.1.664.2.154.6.1.1.2.1.1.4	INTEGER	read-only	This variable indicates whether the card located in the slot determined by the MLIndex is in a test mode or not. The choices for this variable are Number State Status ------ ----- ------ 1 Test in Progress Yellow 2 Flashing Flashing Yellow 3 Off Off
adATLAS890FpnlSysLeds	1.3.6.1.4.1.664.2.154.6.1.1.3
INT adATLAS890FpnlSysFansLed	1.3.6.1.4.1.664.2.154.6.1.1.3.1	INTEGER	read-only	This variable indicates the status of the Fans LED. When the Fans LED changes state, this variable also changes state. The various Fans LED states are: Number State Status ------ ----- ------ 1 OK Green 2 Failure Red 3 Warning Yellow
INT adATLAS890FpnlSysAlarm	1.3.6.1.4.1.664.2.154.6.1.1.3.2	INTEGER	read-only	This variable indicates the status of the Alarm LED. When the Alarm LED changes state, this variable also changes state. The various Alarm LED states are: Number State Status ------ ----- ------ 1 Alarm Red 2 Warning Flashing Red 3 Off Off
INT adATLAS890FpnlSysACO	1.3.6.1.4.1.664.2.154.6.1.1.3.3	INTEGER	read-only	This variable indicates the status of the ACO LED. When the ACO switch is pressed, this LED is lit. The various CSU Test states are: Number State Status ------ ----- ------ 1 Clear Yellow 2 Flash Flashing Yellow 3 Off Off

RFC description

Manages front panel hardware of ADTRAN ATLAS 890 devices including LEDs, fans, alarm relays, and external inputs.

Start monitoring ADTRAN Atlas 890 access device (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ADTRAN-ATLAS890-FRONTPANEL-MIB

What Is ADTRAN-ATLAS890-FRONTPANEL-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description