All MIBs › AC-PM-MEDIA-MIB
Organization: AudioCodes Ltd
Last Updated: 2009-02-11
Category: Telephony and VoIP, Vendor: AudioCodes
Description: Supplies media stream (RTP/RTCP) performance statistics for AudioCodes gateways, including jitter, packet loss, and estimated MOS scores.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is AC-PM-MEDIA-MIB?
AC-PM-MEDIA-MIB is an AudioCodes module providing performance monitoring statistics for media (RTP/RTCP) streams on AudioCodes voice/media gateways. Per its description, it is split into a Configuration subtree controlling the measurement interval length and per-table alarm thresholds, and a Data subtree presenting the actual monitored elements' statistics, such as jitter, packet loss, and MOS score estimates. This MIB is a clear performance/quality monitoring tool for VoIP media: it lets an operator track call-quality-affecting metrics over configurable intervals and receive a defined sentinel value of -1 when a measurement isn't yet available or applicable, helping distinguish no-data-yet from a genuine zero reading. It is specific to AudioCodes' Performance Monitoring (PM) MIB family and likely used alongside related AC-PM-* MIBs covering other subsystems. It is deployed on AudioCodes media gateways/session border controllers in VoIP and unified communications environments to ensure voice quality, and administrators can download the AC-PM-MEDIA-MIB file to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in AC-PM-MEDIA-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- AudioCodes media gateway/session border controller
Monitoring Examples
No specific object names were provided in the sample data, but based on the module description, an operator would configure the measurement interval and thresholds in the Configuration subtree, then poll the Data subtree's per-stream tables for jitter, packet loss percentage, and estimated MOS score. A MOS score dropping below an acceptable threshold, or a -1 sentinel persisting past the expected interval, would indicate a media quality problem or a stream not yet measured.
What Can Be Monitored
- RTP/RTCP jitter
- packet loss
- estimated MOS score
- measurement interval configuration
- per-table alarm thresholds
This MIB depends on
Related MIBs
Imported Objects
From AUDIOCODES-TYPES-MIB
| acBoardMibs | OBJECT-IDENTITY |
| acGeneric | OBJECT-IDENTITY |
| acPerformance | OBJECT-IDENTITY |
| acProducts | OBJECT-IDENTITY |
| acRegistrations | OBJECT-IDENTITY |
| audioCodes | OBJECT-IDENTITY |
From RFC1155-SMI
| IpAddress |
From SNMP-FRAMEWORK-MIB
| SnmpAdminString |
From SNMPv2-SMI
| Counter32 | |
| Gauge32 | |
| Integer32 | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 | |
| enterprises |
From SNMPv2-TC
| DateAndTime | |
| DisplayString | |
| TAddress | |
| TEXTUAL-CONVENTION |
How to Use in IPNetwork Monitor
Example using acPMDSPUtilVolume OID:
Select an AudioCodes Mediant-series gateways/SBC as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type acPMDSPUtilVolume into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the activity volume. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| acPMMedia | 1.3.6.1.4.1.5003.10.7 | The AC-PM-Media MIB offers performance monitoring For the Media related elements in Audiocodes' devices. The Configuration sub-tree is for configuring the interval Period length for the entire AC-PM-Media MIB, and the different tables' thresholds. The Data sub-tree presents the tables of monitored elements. Note - for the entire MIB the value (-1) means the value Asked for is either not supported or currently not relevant (this is for when values asked for are for intervals not yet recorded. | ||
| acPMMediaConfiguration | 1.3.6.1.4.1.5003.10.7.1 | |||
| U32 acPMMediaConfigurationPeriodLength | 1.3.6.1.4.1.5003.10.7.1.1 | Unsigned32 | read-write | Length of monitoring intervals for entire MIB. Time is in minutes. Access: Instant. |
| INT acPMMediaConfigurationResetTotalCounters | 1.3.6.1.4.1.5003.10.7.1.2 | INTEGER | read-write | Total-Counters Reset. To reset the total counters, set the value of this object to resetTotalCounters(2). Access: Instant. |
| acPMDSPAttributes | 1.3.6.1.4.1.5003.10.7.1.31 | |||
| U32 acPMDSPAttributesDSPUtilHighThreshold | 1.3.6.1.4.1.5003.10.7.1.31.1 | Unsigned32 | read-write | High threshold. Access: Instant. |
| U32 acPMDSPAttributesDSPUtilLowThreshold | 1.3.6.1.4.1.5003.10.7.1.31.2 | Unsigned32 | read-write | Low threshold. Access: Instant. |
| acPMCodersAttributes | 1.3.6.1.4.1.5003.10.7.1.32 | |||
| U32 acPMCodersAttributesChannelsPerCoderHighThreshold | 1.3.6.1.4.1.5003.10.7.1.32.1 | Unsigned32 | read-write | High threshold. Access: Instant. |
| U32 acPMCodersAttributesChannelsPerCoderLowThreshold | 1.3.6.1.4.1.5003.10.7.1.32.2 | Unsigned32 | read-write | Low threshold. Access: Instant. |
| acPMNetworkingAttributes | 1.3.6.1.4.1.5003.10.7.1.33 | |||
| U32 acPMNetworkingAttributesPacketDelayHighThreshold | 1.3.6.1.4.1.5003.10.7.1.33.1 | Unsigned32 | read-write | High threshold. Access: Instant. |
| U32 acPMNetworkingAttributesPacketDelayLowThreshold | 1.3.6.1.4.1.5003.10.7.1.33.2 | Unsigned32 | read-write | Low threshold. Access: Instant. |
| U32 acPMNetworkingAttributesPacketJitterHighThreshold | 1.3.6.1.4.1.5003.10.7.1.33.3 | Unsigned32 | read-write | High threshold. Access: Instant. |
| U32 acPMNetworkingAttributesPacketJitterLowThreshold | 1.3.6.1.4.1.5003.10.7.1.33.4 | Unsigned32 | read-write | Low threshold. Access: Instant. |
| U32 acPMNetworkingAttributesRTPBytesTxHighThreshold | 1.3.6.1.4.1.5003.10.7.1.33.5 | Unsigned32 | read-write | High threshold. Access: Instant. |
| U32 acPMNetworkingAttributesRTPBytesTxLowThreshold | 1.3.6.1.4.1.5003.10.7.1.33.6 | Unsigned32 | read-write | Low threshold. Access: Instant. |
| U32 acPMNetworkingAttributesRTPBytesRxHighThreshold | 1.3.6.1.4.1.5003.10.7.1.33.7 | Unsigned32 | read-write | High threshold. Access: Instant. |
| U32 acPMNetworkingAttributesRTPBytesRxLowThreshold | 1.3.6.1.4.1.5003.10.7.1.33.8 | Unsigned32 | read-write | Low threshold. Access: Instant. |
| U32 acPMNetworkingAttributesRTPPacketsTxHighThreshold | 1.3.6.1.4.1.5003.10.7.1.33.9 | Unsigned32 | read-write | High threshold. Access: Instant. |
| U32 acPMNetworkingAttributesRTPPacketsTxLowThreshold | 1.3.6.1.4.1.5003.10.7.1.33.10 | Unsigned32 | read-write | Low threshold. Access: Instant. |
| U32 acPMNetworkingAttributesRTPPacketsRxHighThreshold | 1.3.6.1.4.1.5003.10.7.1.33.11 | Unsigned32 | read-write | High threshold. Access: Instant. |
| U32 acPMNetworkingAttributesRTPPacketsRxLowThreshold | 1.3.6.1.4.1.5003.10.7.1.33.12 | Unsigned32 | read-write | Low threshold. Access: Instant. |
| U32 acPMNetworkingAttributesRTPPacketLossRxHighThreshold | 1.3.6.1.4.1.5003.10.7.1.33.13 | Unsigned32 | read-write | High threshold. Access: Instant. |
| U32 acPMNetworkingAttributesRTPPacketLossRxLowThreshold | 1.3.6.1.4.1.5003.10.7.1.33.14 | Unsigned32 | read-write | Low threshold. Access: Instant. |
| U32 acPMNetworkingAttributesRTPPacketLossTxHighThreshold | 1.3.6.1.4.1.5003.10.7.1.33.15 | Unsigned32 | read-write | High threshold. Access: Instant. |
| U32 acPMNetworkingAttributesRTPPacketLossTxLowThreshold | 1.3.6.1.4.1.5003.10.7.1.33.16 | Unsigned32 | read-write | Low threshold. Access: Instant. |
| U32 acPMNetworkingAttributesModuleRTPPacketLossRxHighThreshold | 1.3.6.1.4.1.5003.10.7.1.33.17 | Unsigned32 | read-write | High threshold. Access: Instant. |
| U32 acPMNetworkingAttributesModuleRTPPacketLossRxLowThreshold | 1.3.6.1.4.1.5003.10.7.1.33.18 | Unsigned32 | read-write | Low threshold. Access: Instant. |
| U32 acPMNetworkingAttributesModuleRTPPacketLossTxHighThreshold | 1.3.6.1.4.1.5003.10.7.1.33.19 | Unsigned32 | read-write | High threshold. Access: Instant. |
| U32 acPMNetworkingAttributesModuleRTPPacketLossTxLowThreshold | 1.3.6.1.4.1.5003.10.7.1.33.20 | Unsigned32 | read-write | Low threshold. Access: Instant. |
| acPMMediaNetworkingAggregatedAttributes | 1.3.6.1.4.1.5003.10.7.1.33.21 | |||
| U32 acPMMediaNetworkingAggregatedAttributesPacketDelayHighThreshold | 1.3.6.1.4.1.5003.10.7.1.33.21.1 | Unsigned32 | read-write | High threshold. Access: Instant. |
| U32 acPMMediaNetworkingAggregatedAttributesPacketDelayLowThreshold | 1.3.6.1.4.1.5003.10.7.1.33.21.2 | Unsigned32 | read-write | Low threshold. Access: Instant. |
| U32 acPMMediaNetworkingAggregatedAttributesPacketJitterHighThreshold | 1.3.6.1.4.1.5003.10.7.1.33.21.3 | Unsigned32 | read-write | High threshold. Access: Instant. |
| U32 acPMMediaNetworkingAggregatedAttributesPacketJitterLowThreshold | 1.3.6.1.4.1.5003.10.7.1.33.21.4 | Unsigned32 | read-write | Low threshold. Access: Instant. |
| U32 acPMMediaNetworkingAggregatedAttributesRTPBytesTxHighThreshold | 1.3.6.1.4.1.5003.10.7.1.33.21.5 | Unsigned32 | read-write | High threshold. Access: Instant. |
| U32 acPMMediaNetworkingAggregatedAttributesRTPBytesTxLowThreshold | 1.3.6.1.4.1.5003.10.7.1.33.21.6 | Unsigned32 | read-write | Low threshold. Access: Instant. |
| U32 acPMMediaNetworkingAggregatedAttributesRTPBytesRxHighThreshold | 1.3.6.1.4.1.5003.10.7.1.33.21.7 | Unsigned32 | read-write | High threshold. Access: Instant. |
| U32 acPMMediaNetworkingAggregatedAttributesRTPBytesRxLowThreshold | 1.3.6.1.4.1.5003.10.7.1.33.21.8 | Unsigned32 | read-write | Low threshold. Access: Instant. |
| U32 acPMMediaNetworkingAggregatedAttributesRTPPacketsTxHighThreshold | 1.3.6.1.4.1.5003.10.7.1.33.21.9 | Unsigned32 | read-write | High threshold. Access: Instant. |
| U32 acPMMediaNetworkingAggregatedAttributesRTPPacketsTxLowThreshold | 1.3.6.1.4.1.5003.10.7.1.33.21.10 | Unsigned32 | read-write | Low threshold. Access: Instant. |
| U32 acPMMediaNetworkingAggregatedAttributesRTPPacketsRxHighThreshold | 1.3.6.1.4.1.5003.10.7.1.33.21.11 | Unsigned32 | read-write | High threshold. Access: Instant. |
| U32 acPMMediaNetworkingAggregatedAttributesRTPPacketsRxLowThreshold | 1.3.6.1.4.1.5003.10.7.1.33.21.12 | Unsigned32 | read-write | Low threshold. Access: Instant. |
| acPMMediaChannelUtilizationAttr | 1.3.6.1.4.1.5003.10.7.1.34 | |||
| U32 acPMMediaChannelUtilizationAttrFaxChannelsHighThreshold | 1.3.6.1.4.1.5003.10.7.1.34.1 | Unsigned32 | read-write | High threshold. Access: Instant. |
| U32 acPMMediaChannelUtilizationAttrFaxChannelsLowThreshold | 1.3.6.1.4.1.5003.10.7.1.34.2 | Unsigned32 | read-write | Low threshold. Access: Instant. |
| U32 acPMMediaChannelUtilizationAttrModemChannelsHighThreshold | 1.3.6.1.4.1.5003.10.7.1.34.3 | Unsigned32 | read-write | High threshold. Access: Instant. |
| U32 acPMMediaChannelUtilizationAttrModemChannelsLowThreshold | 1.3.6.1.4.1.5003.10.7.1.34.4 | Unsigned32 | read-write | Low threshold. Access: Instant. |
| U32 acPMMediaChannelUtilizationAttrTDM2IPChannelsHighThreshold | 1.3.6.1.4.1.5003.10.7.1.34.5 | Unsigned32 | read-write | High threshold. Access: Instant. |
| U32 acPMMediaChannelUtilizationAttrTDM2IPChannelsLowThreshold | 1.3.6.1.4.1.5003.10.7.1.34.6 | Unsigned32 | read-write | Low threshold. Access: Instant. |
| U32 acPMMediaChannelUtilizationAttrRTPStreamsHighThreshold | 1.3.6.1.4.1.5003.10.7.1.34.7 | Unsigned32 | read-write | High threshold. Access: Instant. |
| U32 acPMMediaChannelUtilizationAttrRTPStreamsLowThreshold | 1.3.6.1.4.1.5003.10.7.1.34.8 | Unsigned32 | read-write | Low threshold. Access: Instant. |
| U32 acPMMediaChannelUtilizationAttrSRTPStreamsHighThreshold | 1.3.6.1.4.1.5003.10.7.1.34.9 | Unsigned32 | read-write | High threshold. Access: Instant. |
| U32 acPMMediaChannelUtilizationAttrSRTPStreamsLowThreshold | 1.3.6.1.4.1.5003.10.7.1.34.10 | Unsigned32 | read-write | Low threshold. Access: Instant. |
| U32 acPMMediaChannelUtilizationAttrMulticastRegisChanHighThreshold | 1.3.6.1.4.1.5003.10.7.1.34.11 | Unsigned32 | read-write | High threshold. Access: Instant. |
| U32 acPMMediaChannelUtilizationAttrMulticastRegisChanLowThreshold | 1.3.6.1.4.1.5003.10.7.1.34.12 | Unsigned32 | read-write | Low threshold. Access: Instant. |
| U32 acPMMediaChannelUtilizationAttrModemRelayHighThreshold | 1.3.6.1.4.1.5003.10.7.1.34.13 | Unsigned32 | read-write | High threshold. Access: Instant. |
| U32 acPMMediaChannelUtilizationAttrModemRelayLowThreshold | 1.3.6.1.4.1.5003.10.7.1.34.14 | Unsigned32 | read-write | Low threshold. Access: Instant. |
| acPMMediaData | 1.3.6.1.4.1.5003.10.7.2 | |||
| U32 acPMMediaDataAcPMMediaTimeFromStartOfInterval | 1.3.6.1.4.1.5003.10.7.2.1 | Unsigned32 | read-only | The time in seconds since the start of the current interval. MIB specific. |
| acPMDSPUtilTable | 1.3.6.1.4.1.5003.10.7.2.21 | not-accessible | Number of active DSP channels. | |
| acPMDSPUtilEntry | 1.3.6.1.4.1.5003.10.7.2.21.1 | not-accessible | ||
| U32 acPMDSPUtilInterval | 1.3.6.1.4.1.5003.10.7.2.21.1.1 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| G32 acPMDSPUtilVal | 1.3.6.1.4.1.5003.10.7.2.21.1.2 | Gauge32 | read-only | Value of gauge or counter. |
| I32 acPMDSPUtilAverage | 1.3.6.1.4.1.5003.10.7.2.21.1.3 | Integer32 | read-only | Average value with in the period time. |
| I32 acPMDSPUtilMax | 1.3.6.1.4.1.5003.10.7.2.21.1.4 | Integer32 | read-only | Maximum value with in the period time. |
| I32 acPMDSPUtilMin | 1.3.6.1.4.1.5003.10.7.2.21.1.5 | Integer32 | read-only | Minimum value with in the period time. |
| C32 acPMDSPUtilVolumeEx | 1.3.6.1.4.1.5003.10.7.2.21.1.6 | Counter32 | read-only | Activity volume. |
| I32 acPMDSPUtilTimeBelowLowThreshold | 1.3.6.1.4.1.5003.10.7.2.21.1.7 | Integer32 | read-only | Percent of interval time for which gauge is below what was determined as the low threshold. |
| I32 acPMDSPUtilTimeBetweenThresholds | 1.3.6.1.4.1.5003.10.7.2.21.1.8 | Integer32 | read-only | Percent of interval time for which gauge is above what was determined as the high threshold. |
| I32 acPMDSPUtilTimeAboveHighThreshold | 1.3.6.1.4.1.5003.10.7.2.21.1.9 | Integer32 | read-only | Percent of interval time for which gauge is between what were determined as the low and high thresholds. |
| I32 acPMDSPUtilFullDayAverage | 1.3.6.1.4.1.5003.10.7.2.21.1.10 | Integer32 | read-only | The average of full 24 hours. |
| acPMChannelsPerCoderTable | 1.3.6.1.4.1.5003.10.7.2.22 | not-accessible | Number of active channels per coder. Index: 0=G711, 1=G723, 2=G728, 3=G729a, 4=G729e, 5=AMR | |
| acPMChannelsPerCoderEntry | 1.3.6.1.4.1.5003.10.7.2.22.1 | not-accessible | ||
| INT acPMChannelsPerCoderCoders | 1.3.6.1.4.1.5003.10.7.2.22.1.1 | INTEGER | not-accessible | Coder. 0=G711, 1=G723, 2=G728, 3=G729a, 4=G729e, 5=AMR, 6=G729EV, 7=EG711, 8=EVRC. |
| U32 acPMChannelsPerCoderInterval | 1.3.6.1.4.1.5003.10.7.2.22.1.2 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| G32 acPMChannelsPerCoderVal | 1.3.6.1.4.1.5003.10.7.2.22.1.3 | Gauge32 | read-only | Value of gauge or counter. |
| I32 acPMChannelsPerCoderAverage | 1.3.6.1.4.1.5003.10.7.2.22.1.4 | Integer32 | read-only | Average value with in the period time. |
| I32 acPMChannelsPerCoderMax | 1.3.6.1.4.1.5003.10.7.2.22.1.5 | Integer32 | read-only | Maximum value with in the period time. |
| I32 acPMChannelsPerCoderMin | 1.3.6.1.4.1.5003.10.7.2.22.1.6 | Integer32 | read-only | Minimum value with in the period time. |
| C32 acPMChannelsPerCoderVolume | 1.3.6.1.4.1.5003.10.7.2.22.1.7 | Counter32 | read-only | Activity volume. |
| I32 acPMChannelsPerCoderTimeBelowLowThreshold | 1.3.6.1.4.1.5003.10.7.2.22.1.8 | Integer32 | read-only | Percent of interval time for which gauge is below what was determined as the low threshold. |
| I32 acPMChannelsPerCoderTimeBetweenThresholds | 1.3.6.1.4.1.5003.10.7.2.22.1.9 | Integer32 | read-only | Percent of interval time for which gauge is above what was determined as the high threshold. |
| I32 acPMChannelsPerCoderTimeAboveHighThreshold | 1.3.6.1.4.1.5003.10.7.2.22.1.10 | Integer32 | read-only | Percent of interval time for which gauge is between what were determined as the low and high thresholds. |
| I32 acPMChannelsPerCoderFullDayAverage | 1.3.6.1.4.1.5003.10.7.2.22.1.11 | Integer32 | read-only | The average of full 24 hours. |
| acPMRobustDiscardTable | 1.3.6.1.4.1.5003.10.7.2.23 | not-accessible | Number of packets discarded by the robust RTP filter. | |
| acPMRobustDiscardEntry | 1.3.6.1.4.1.5003.10.7.2.23.1 | not-accessible | ||
| U32 acPMRobustDiscardInterval | 1.3.6.1.4.1.5003.10.7.2.23.1.1 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| C32 acPMRobustDiscardVal | 1.3.6.1.4.1.5003.10.7.2.23.1.2 | Counter32 | read-only | Value of gauge or counter. |
| acPMMediaNetworking | 1.3.6.1.4.1.5003.10.7.2.31 | |||
| acPMPacketDelayTable | 1.3.6.1.4.1.5003.10.7.2.31.1 | not-accessible | Packet delay in RTCP data, per trunk. | |
| acPMPacketDelayEntry | 1.3.6.1.4.1.5003.10.7.2.31.1.1 | not-accessible | ||
| U32 acPMPacketDelayTrunkNum | 1.3.6.1.4.1.5003.10.7.2.31.1.1.1 | Unsigned32 | not-accessible | Trunk number. 0 is the first trunk. |
| U32 acPMPacketDelayInterval | 1.3.6.1.4.1.5003.10.7.2.31.1.1.2 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| G32 acPMPacketDelayVal | 1.3.6.1.4.1.5003.10.7.2.31.1.1.3 | Gauge32 | read-only | Value of gauge or counter. |
| I32 acPMPacketDelayAverage | 1.3.6.1.4.1.5003.10.7.2.31.1.1.4 | Integer32 | read-only | Average value with in the period time. |
| I32 acPMPacketDelayMax | 1.3.6.1.4.1.5003.10.7.2.31.1.1.5 | Integer32 | read-only | Maximum value with in the period time. |
| I32 acPMPacketDelayMin | 1.3.6.1.4.1.5003.10.7.2.31.1.1.6 | Integer32 | read-only | Minimum value with in the period time. |
| C32 acPMPacketDelayVolume | 1.3.6.1.4.1.5003.10.7.2.31.1.1.7 | Counter32 | read-only | Activity volume. |
| I32 acPMPacketDelayTimeBelowLowThreshold | 1.3.6.1.4.1.5003.10.7.2.31.1.1.8 | Integer32 | read-only | Percent of interval time for which gauge is below what was determined as the low threshold. |
| I32 acPMPacketDelayTimeBetweenThresholds | 1.3.6.1.4.1.5003.10.7.2.31.1.1.9 | Integer32 | read-only | Percent of interval time for which gauge is above what was determined as the high threshold. |
| I32 acPMPacketDelayTimeAboveHighThreshold | 1.3.6.1.4.1.5003.10.7.2.31.1.1.10 | Integer32 | read-only | Percent of interval time for which gauge is between what were determined as the low and high thresholds. |
| I32 acPMPacketDelayFullDayAverage | 1.3.6.1.4.1.5003.10.7.2.31.1.1.11 | Integer32 | read-only | The average of full 24 hours. |
| acPMPacketJitterTable | 1.3.6.1.4.1.5003.10.7.2.31.2 | not-accessible | Packet jitter in RTCP data, per trunk. | |
| acPMPacketJitterEntry | 1.3.6.1.4.1.5003.10.7.2.31.2.1 | not-accessible | ||
| U32 acPMPacketJitterTrunkNum | 1.3.6.1.4.1.5003.10.7.2.31.2.1.1 | Unsigned32 | not-accessible | Trunk number. 0 is the first trunk. |
| U32 acPMPacketJitterInterval | 1.3.6.1.4.1.5003.10.7.2.31.2.1.2 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| G32 acPMPacketJitterVal | 1.3.6.1.4.1.5003.10.7.2.31.2.1.3 | Gauge32 | read-only | Value of gauge or counter. |
| I32 acPMPacketJitterAverage | 1.3.6.1.4.1.5003.10.7.2.31.2.1.4 | Integer32 | read-only | Average value with in the period time. |
| I32 acPMPacketJitterMax | 1.3.6.1.4.1.5003.10.7.2.31.2.1.5 | Integer32 | read-only | Maximum value with in the period time. |
| I32 acPMPacketJitterMin | 1.3.6.1.4.1.5003.10.7.2.31.2.1.6 | Integer32 | read-only | Minimum value with in the period time. |
| C32 acPMPacketJitterVolume | 1.3.6.1.4.1.5003.10.7.2.31.2.1.7 | Counter32 | read-only | Activity volume. |
| I32 acPMPacketJitterTimeBelowLowThreshold | 1.3.6.1.4.1.5003.10.7.2.31.2.1.8 | Integer32 | read-only | Percent of interval time for which gauge is below what was determined as the low threshold. |
| I32 acPMPacketJitterTimeBetweenThresholds | 1.3.6.1.4.1.5003.10.7.2.31.2.1.9 | Integer32 | read-only | Percent of interval time for which gauge is above what was determined as the high threshold. |
| I32 acPMPacketJitterTimeAboveHighThreshold | 1.3.6.1.4.1.5003.10.7.2.31.2.1.10 | Integer32 | read-only | Percent of interval time for which gauge is between what were determined as the low and high thresholds. |
| I32 acPMPacketJitterFullDayAverage | 1.3.6.1.4.1.5003.10.7.2.31.2.1.11 | Integer32 | read-only | The average of full 24 hours. |
| acPMRTPBytesTxTable | 1.3.6.1.4.1.5003.10.7.2.31.3 | not-accessible | RTP bytes sent in RTCP data, per trunk. | |
| acPMRTPBytesTxEntry | 1.3.6.1.4.1.5003.10.7.2.31.3.1 | not-accessible | ||
| U32 acPMRTPBytesTxTrunkNum | 1.3.6.1.4.1.5003.10.7.2.31.3.1.1 | Unsigned32 | not-accessible | Trunk number. 0 is the first trunk. |
| U32 acPMRTPBytesTxInterval | 1.3.6.1.4.1.5003.10.7.2.31.3.1.2 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| G32 acPMRTPBytesTxVal | 1.3.6.1.4.1.5003.10.7.2.31.3.1.3 | Gauge32 | read-only | Value of gauge or counter. |
| I32 acPMRTPBytesTxAverage | 1.3.6.1.4.1.5003.10.7.2.31.3.1.4 | Integer32 | read-only | Average value with in the period time. |
| I32 acPMRTPBytesTxMax | 1.3.6.1.4.1.5003.10.7.2.31.3.1.5 | Integer32 | read-only | Maximum value with in the period time. |
| I32 acPMRTPBytesTxMin | 1.3.6.1.4.1.5003.10.7.2.31.3.1.6 | Integer32 | read-only | Minimum value with in the period time. |
| C32 acPMRTPBytesTxVolume | 1.3.6.1.4.1.5003.10.7.2.31.3.1.7 | Counter32 | read-only | Activity volume. |
| I32 acPMRTPBytesTxTimeBelowLowThreshold | 1.3.6.1.4.1.5003.10.7.2.31.3.1.8 | Integer32 | read-only | Percent of interval time for which counter is below what was determined as the low threshold. |
| I32 acPMRTPBytesTxTimeBetweenThresholds | 1.3.6.1.4.1.5003.10.7.2.31.3.1.9 | Integer32 | read-only | Percent of interval time for which counter is above what was determined as the high threshold. |
| I32 acPMRTPBytesTxTimeAboveHighThreshold | 1.3.6.1.4.1.5003.10.7.2.31.3.1.10 | Integer32 | read-only | Percent of interval time for which counter is between what were determined as the low and high thresholds. |
| I32 acPMRTPBytesTxFullDayAverage | 1.3.6.1.4.1.5003.10.7.2.31.3.1.11 | Integer32 | read-only | The average of full 24 hours. |
| acPMRTPBytesRxTable | 1.3.6.1.4.1.5003.10.7.2.31.4 | not-accessible | RTP bytes received in RTCP data, per trunk. | |
| acPMRTPBytesRxEntry | 1.3.6.1.4.1.5003.10.7.2.31.4.1 | not-accessible | ||
| U32 acPMRTPBytesRxTrunkNum | 1.3.6.1.4.1.5003.10.7.2.31.4.1.1 | Unsigned32 | not-accessible | Trunk number. 0 is the first trunk. |
| U32 acPMRTPBytesRxInterval | 1.3.6.1.4.1.5003.10.7.2.31.4.1.2 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| G32 acPMRTPBytesRxVal | 1.3.6.1.4.1.5003.10.7.2.31.4.1.3 | Gauge32 | read-only | Value of gauge or counter. |
| I32 acPMRTPBytesRxAverage | 1.3.6.1.4.1.5003.10.7.2.31.4.1.4 | Integer32 | read-only | Average value with in the period time. |
| I32 acPMRTPBytesRxMax | 1.3.6.1.4.1.5003.10.7.2.31.4.1.5 | Integer32 | read-only | Maximum value with in the period time. |
| I32 acPMRTPBytesRxMin | 1.3.6.1.4.1.5003.10.7.2.31.4.1.6 | Integer32 | read-only | Minimum value with in the period time. |
| C32 acPMRTPBytesRxVolume | 1.3.6.1.4.1.5003.10.7.2.31.4.1.7 | Counter32 | read-only | Activity volume. |
| I32 acPMRTPBytesRxTimeBelowLowThreshold | 1.3.6.1.4.1.5003.10.7.2.31.4.1.8 | Integer32 | read-only | Percent of interval time for which counter is below what was determined as the low threshold. |
| I32 acPMRTPBytesRxTimeBetweenThresholds | 1.3.6.1.4.1.5003.10.7.2.31.4.1.9 | Integer32 | read-only | Percent of interval time for which counter is above what was determined as the high threshold. |
| I32 acPMRTPBytesRxTimeAboveHighThreshold | 1.3.6.1.4.1.5003.10.7.2.31.4.1.10 | Integer32 | read-only | Percent of interval time for which counter is between what were determined as the low and high thresholds. |
| I32 acPMRTPBytesRxFullDayAverage | 1.3.6.1.4.1.5003.10.7.2.31.4.1.11 | Integer32 | read-only | The average of full 24 hours. |
| acPMRTPPacketsTxTable | 1.3.6.1.4.1.5003.10.7.2.31.5 | not-accessible | RTP packets sent in RTCP data, per trunk. | |
| acPMRTPPacketsTxEntry | 1.3.6.1.4.1.5003.10.7.2.31.5.1 | not-accessible | ||
| U32 acPMRTPPacketsTxTrunkNum | 1.3.6.1.4.1.5003.10.7.2.31.5.1.1 | Unsigned32 | not-accessible | Trunk number. 0 is the first trunk. |
| U32 acPMRTPPacketsTxInterval | 1.3.6.1.4.1.5003.10.7.2.31.5.1.2 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| G32 acPMRTPPacketsTxVal | 1.3.6.1.4.1.5003.10.7.2.31.5.1.3 | Gauge32 | read-only | Value of gauge or counter. |
| I32 acPMRTPPacketsTxAverage | 1.3.6.1.4.1.5003.10.7.2.31.5.1.4 | Integer32 | read-only | Average value with in the period time. |
| I32 acPMRTPPacketsTxMax | 1.3.6.1.4.1.5003.10.7.2.31.5.1.5 | Integer32 | read-only | Maximum value with in the period time. |
| I32 acPMRTPPacketsTxMin | 1.3.6.1.4.1.5003.10.7.2.31.5.1.6 | Integer32 | read-only | Minimum value with in the period time. |
| C32 acPMRTPPacketsTxVolume | 1.3.6.1.4.1.5003.10.7.2.31.5.1.7 | Counter32 | read-only | Activity volume. |
| I32 acPMRTPPacketsTxTimeBelowLowThreshold | 1.3.6.1.4.1.5003.10.7.2.31.5.1.8 | Integer32 | read-only | Percent of interval time for which counter is below what was determined as the low threshold. |
| I32 acPMRTPPacketsTxTimeBetweenThresholds | 1.3.6.1.4.1.5003.10.7.2.31.5.1.9 | Integer32 | read-only | Percent of interval time for which counter is above what was determined as the high threshold. |
| I32 acPMRTPPacketsTxTimeAboveHighThreshold | 1.3.6.1.4.1.5003.10.7.2.31.5.1.10 | Integer32 | read-only | Percent of interval time for which counter is between what were determined as the low and high thresholds. |
| I32 acPMRTPPacketsTxFullDayAverage | 1.3.6.1.4.1.5003.10.7.2.31.5.1.11 | Integer32 | read-only | The average of full 24 hours. |
| I32 acPMRTPPacketsTxTotal | 1.3.6.1.4.1.5003.10.7.2.31.5.1.12 | Integer32 | read-only | Total since last reset. |
| acPMRTPPacketsRxTable | 1.3.6.1.4.1.5003.10.7.2.31.6 | not-accessible | RTP packets received in RTCP data, per trunk. | |
| acPMRTPPacketsRxEntry | 1.3.6.1.4.1.5003.10.7.2.31.6.1 | not-accessible | ||
| U32 acPMRTPPacketsRxTrunkNum | 1.3.6.1.4.1.5003.10.7.2.31.6.1.1 | Unsigned32 | not-accessible | Trunk number. 0 is the first trunk. |
| U32 acPMRTPPacketsRxInterval | 1.3.6.1.4.1.5003.10.7.2.31.6.1.2 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| G32 acPMRTPPacketsRxVal | 1.3.6.1.4.1.5003.10.7.2.31.6.1.3 | Gauge32 | read-only | Value of gauge or counter. |
| I32 acPMRTPPacketsRxAverage | 1.3.6.1.4.1.5003.10.7.2.31.6.1.4 | Integer32 | read-only | Average value with in the period time. |
| I32 acPMRTPPacketsRxMax | 1.3.6.1.4.1.5003.10.7.2.31.6.1.5 | Integer32 | read-only | Maximum value with in the period time. |
| I32 acPMRTPPacketsRxMin | 1.3.6.1.4.1.5003.10.7.2.31.6.1.6 | Integer32 | read-only | Minimum value with in the period time. |
| C32 acPMRTPPacketsRxVolume | 1.3.6.1.4.1.5003.10.7.2.31.6.1.7 | Counter32 | read-only | Activity volume. |
| I32 acPMRTPPacketsRxTimeBelowLowThreshold | 1.3.6.1.4.1.5003.10.7.2.31.6.1.8 | Integer32 | read-only | Percent of interval time for which counter is below what was determined as the low threshold. |
| I32 acPMRTPPacketsRxTimeBetweenThresholds | 1.3.6.1.4.1.5003.10.7.2.31.6.1.9 | Integer32 | read-only | Percent of interval time for which counter is above what was determined as the high threshold. |
| I32 acPMRTPPacketsRxTimeAboveHighThreshold | 1.3.6.1.4.1.5003.10.7.2.31.6.1.10 | Integer32 | read-only | Percent of interval time for which counter is between what were determined as the low and high thresholds. |
| I32 acPMRTPPacketsRxFullDayAverage | 1.3.6.1.4.1.5003.10.7.2.31.6.1.11 | Integer32 | read-only | The average of full 24 hours. |
| I32 acPMRTPPacketsRxTotal | 1.3.6.1.4.1.5003.10.7.2.31.6.1.12 | Integer32 | read-only | Total since last reset. |
| acPMRTPPacketLossRxTable | 1.3.6.1.4.1.5003.10.7.2.31.7 | not-accessible | RTP packet loss reported in outgoing RTCP data, per trunk. | |
| acPMRTPPacketLossRxEntry | 1.3.6.1.4.1.5003.10.7.2.31.7.1 | not-accessible | ||
| U32 acPMRTPPacketLossRxTrunkNum | 1.3.6.1.4.1.5003.10.7.2.31.7.1.1 | Unsigned32 | not-accessible | Trunk number. 0 is the first trunk. |
| U32 acPMRTPPacketLossRxInterval | 1.3.6.1.4.1.5003.10.7.2.31.7.1.2 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| G32 acPMRTPPacketLossRxVal | 1.3.6.1.4.1.5003.10.7.2.31.7.1.3 | Gauge32 | read-only | Value of gauge or counter. |
| I32 acPMRTPPacketLossRxAverage | 1.3.6.1.4.1.5003.10.7.2.31.7.1.4 | Integer32 | read-only | Average value with in the period time. |
| I32 acPMRTPPacketLossRxMax | 1.3.6.1.4.1.5003.10.7.2.31.7.1.5 | Integer32 | read-only | Maximum value with in the period time. |
| I32 acPMRTPPacketLossRxMin | 1.3.6.1.4.1.5003.10.7.2.31.7.1.6 | Integer32 | read-only | Minimum value with in the period time. |
| C32 acPMRTPPacketLossRxVolume | 1.3.6.1.4.1.5003.10.7.2.31.7.1.7 | Counter32 | read-only | Activity volume. |
| I32 acPMRTPPacketLossRxTimeBelowLowThreshold | 1.3.6.1.4.1.5003.10.7.2.31.7.1.8 | Integer32 | read-only | Percent of interval time for which gauge is below what was determined as the low threshold. |
| I32 acPMRTPPacketLossRxTimeBetweenThresholds | 1.3.6.1.4.1.5003.10.7.2.31.7.1.9 | Integer32 | read-only | Percent of interval time for which gauge is above what was determined as the high threshold. |
| I32 acPMRTPPacketLossRxTimeAboveHighThreshold | 1.3.6.1.4.1.5003.10.7.2.31.7.1.10 | Integer32 | read-only | Percent of interval time for which gauge is between what were determined as the low and high thresholds. |
| I32 acPMRTPPacketLossRxFullDayAverage | 1.3.6.1.4.1.5003.10.7.2.31.7.1.11 | Integer32 | read-only | The average of full 24 hours. |
| acPMRTPPacketLossTxTable | 1.3.6.1.4.1.5003.10.7.2.31.8 | not-accessible | RTP packet loss reported in incoming RTCP data, per trunk. | |
| acPMRTPPacketLossTxEntry | 1.3.6.1.4.1.5003.10.7.2.31.8.1 | not-accessible | ||
| U32 acPMRTPPacketLossTxTrunkNum | 1.3.6.1.4.1.5003.10.7.2.31.8.1.1 | Unsigned32 | not-accessible | Trunk number. 0 is the first trunk. |
| U32 acPMRTPPacketLossTxInterval | 1.3.6.1.4.1.5003.10.7.2.31.8.1.2 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| G32 acPMRTPPacketLossTxVal | 1.3.6.1.4.1.5003.10.7.2.31.8.1.3 | Gauge32 | read-only | Value of gauge or counter. |
| I32 acPMRTPPacketLossTxAverage | 1.3.6.1.4.1.5003.10.7.2.31.8.1.4 | Integer32 | read-only | Average value with in the period time. |
| I32 acPMRTPPacketLossTxMax | 1.3.6.1.4.1.5003.10.7.2.31.8.1.5 | Integer32 | read-only | Maximum value with in the period time. |
| I32 acPMRTPPacketLossTxMin | 1.3.6.1.4.1.5003.10.7.2.31.8.1.6 | Integer32 | read-only | Minimum value with in the period time. |
| C32 acPMRTPPacketLossTxVolume | 1.3.6.1.4.1.5003.10.7.2.31.8.1.7 | Counter32 | read-only | Activity volume. |
| I32 acPMRTPPacketLossTxTimeBelowLowThreshold | 1.3.6.1.4.1.5003.10.7.2.31.8.1.8 | Integer32 | read-only | Percent of interval time for which gauge is below what was determined as the low threshold. |
| I32 acPMRTPPacketLossTxTimeBetweenThresholds | 1.3.6.1.4.1.5003.10.7.2.31.8.1.9 | Integer32 | read-only | Percent of interval time for which gauge is above what was determined as the high threshold. |
| I32 acPMRTPPacketLossTxTimeAboveHighThreshold | 1.3.6.1.4.1.5003.10.7.2.31.8.1.10 | Integer32 | read-only | Percent of interval time for which gauge is between what were determined as the low and high thresholds. |
| I32 acPMRTPPacketLossTxFullDayAverage | 1.3.6.1.4.1.5003.10.7.2.31.8.1.11 | Integer32 | read-only | The average of full 24 hours. |
| acPMModuleRTPPacketLossRxTable | 1.3.6.1.4.1.5003.10.7.2.31.9 | not-accessible | RTP packet loss reported in incoming RTCP data, per entire module. | |
| acPMModuleRTPPacketLossRxEntry | 1.3.6.1.4.1.5003.10.7.2.31.9.1 | not-accessible | ||
| U32 acPMModuleRTPPacketLossRxInterval | 1.3.6.1.4.1.5003.10.7.2.31.9.1.1 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| I32 acPMModuleRTPPacketLossRxAverage | 1.3.6.1.4.1.5003.10.7.2.31.9.1.2 | Integer32 | read-only | Average value with in the period time. |
| I32 acPMModuleRTPPacketLossRxMax | 1.3.6.1.4.1.5003.10.7.2.31.9.1.3 | Integer32 | read-only | Maximum value with in the period time. |
| I32 acPMModuleRTPPacketLossRxMin | 1.3.6.1.4.1.5003.10.7.2.31.9.1.4 | Integer32 | read-only | Minimum value with in the period time. |
| C32 acPMModuleRTPPacketLossRxVolume | 1.3.6.1.4.1.5003.10.7.2.31.9.1.5 | Counter32 | read-only | Activity volume. |
| I32 acPMModuleRTPPacketLossRxTimeBelowLowThreshold | 1.3.6.1.4.1.5003.10.7.2.31.9.1.6 | Integer32 | read-only | Percent of interval time for which gauge is below what was determined as the low threshold. |
| I32 acPMModuleRTPPacketLossRxTimeBetweenThresholds | 1.3.6.1.4.1.5003.10.7.2.31.9.1.7 | Integer32 | read-only | Percent of interval time for which gauge is above what was determined as the high threshold. |
| I32 acPMModuleRTPPacketLossRxTimeAboveHighThreshold | 1.3.6.1.4.1.5003.10.7.2.31.9.1.8 | Integer32 | read-only | Percent of interval time for which gauge is between what were determined as the low and high thresholds. |
| I32 acPMModuleRTPPacketLossRxFullDayAverage | 1.3.6.1.4.1.5003.10.7.2.31.9.1.9 | Integer32 | read-only | The average of full 24 hours. |
| I32 acPMModuleRTPPacketLossRxTotal | 1.3.6.1.4.1.5003.10.7.2.31.9.1.10 | Integer32 | read-only | Total since last reset. |
| acPMModuleRTPPacketLossTxTable | 1.3.6.1.4.1.5003.10.7.2.31.10 | not-accessible | RTP packet loss reported in outging RTCP data, per entire module. | |
| acPMModuleRTPPacketLossTxEntry | 1.3.6.1.4.1.5003.10.7.2.31.10.1 | not-accessible | ||
| U32 acPMModuleRTPPacketLossTxInterval | 1.3.6.1.4.1.5003.10.7.2.31.10.1.1 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| I32 acPMModuleRTPPacketLossTxAverage | 1.3.6.1.4.1.5003.10.7.2.31.10.1.2 | Integer32 | read-only | Average value with in the period time. |
| I32 acPMModuleRTPPacketLossTxMax | 1.3.6.1.4.1.5003.10.7.2.31.10.1.3 | Integer32 | read-only | Maximum value with in the period time. |
| I32 acPMModuleRTPPacketLossTxMin | 1.3.6.1.4.1.5003.10.7.2.31.10.1.4 | Integer32 | read-only | Minimum value with in the period time. |
| C32 acPMModuleRTPPacketLossTxVolume | 1.3.6.1.4.1.5003.10.7.2.31.10.1.5 | Counter32 | read-only | Activity volume. |
| I32 acPMModuleRTPPacketLossTxTimeBelowLowThreshold | 1.3.6.1.4.1.5003.10.7.2.31.10.1.6 | Integer32 | read-only | Percent of interval time for which gauge is below what was determined as the low threshold. |
| I32 acPMModuleRTPPacketLossTxTimeBetweenThresholds | 1.3.6.1.4.1.5003.10.7.2.31.10.1.7 | Integer32 | read-only | Percent of interval time for which gauge is above what was determined as the high threshold. |
| I32 acPMModuleRTPPacketLossTxTimeAboveHighThreshold | 1.3.6.1.4.1.5003.10.7.2.31.10.1.8 | Integer32 | read-only | Percent of interval time for which gauge is between what were determined as the low and high thresholds. |
| I32 acPMModuleRTPPacketLossTxFullDayAverage | 1.3.6.1.4.1.5003.10.7.2.31.10.1.9 | Integer32 | read-only | The average of full 24 hours. |
| I32 acPMModuleRTPPacketLossTxTotal | 1.3.6.1.4.1.5003.10.7.2.31.10.1.10 | Integer32 | read-only | Total since last reset. |
| acPMMediaNetworkingAggregated | 1.3.6.1.4.1.5003.10.7.2.31.21 | |||
| acPMModulePacketDelayTable | 1.3.6.1.4.1.5003.10.7.2.31.21.1 | not-accessible | Packet delay in RTCP data. This counter is collected for the entire TPM module, and includes TDM-IP and IP-IP calls. | |
| acPMModulePacketDelayEntry | 1.3.6.1.4.1.5003.10.7.2.31.21.1.1 | not-accessible | ||
| U32 acPMModulePacketDelayInterval | 1.3.6.1.4.1.5003.10.7.2.31.21.1.1.1 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| G32 acPMModulePacketDelayVal | 1.3.6.1.4.1.5003.10.7.2.31.21.1.1.2 | Gauge32 | read-only | Value of gauge or counter. |
| I32 acPMModulePacketDelayAverage | 1.3.6.1.4.1.5003.10.7.2.31.21.1.1.3 | Integer32 | read-only | Average value with in the period time. |
| I32 acPMModulePacketDelayMax | 1.3.6.1.4.1.5003.10.7.2.31.21.1.1.4 | Integer32 | read-only | Maximum value with in the period time. |
| I32 acPMModulePacketDelayMin | 1.3.6.1.4.1.5003.10.7.2.31.21.1.1.5 | Integer32 | read-only | Minimum value with in the period time. |
| I32 acPMModulePacketDelayTimeBelowLowThreshold | 1.3.6.1.4.1.5003.10.7.2.31.21.1.1.6 | Integer32 | read-only | Percent of interval time for which gauge is below what was determined as the low threshold. |
| I32 acPMModulePacketDelayTimeBetweenThresholds | 1.3.6.1.4.1.5003.10.7.2.31.21.1.1.7 | Integer32 | read-only | Percent of interval time for which gauge is above what was determined as the high threshold. |
| I32 acPMModulePacketDelayTimeAboveHighThreshold | 1.3.6.1.4.1.5003.10.7.2.31.21.1.1.8 | Integer32 | read-only | Percent of interval time for which gauge is between what were determined as the low and high thresholds. |
| I32 acPMModulePacketDelayFullDayAverage | 1.3.6.1.4.1.5003.10.7.2.31.21.1.1.9 | Integer32 | read-only | The average of full 24 hours. |
| C32 acPMModulePacketDelayVolume | 1.3.6.1.4.1.5003.10.7.2.31.21.1.1.10 | Counter32 | read-only | Activity volume. |
| acPMModulePacketJitterTable | 1.3.6.1.4.1.5003.10.7.2.31.21.2 | not-accessible | Packet jitter in RTCP data. This counter is collected for the entire TPM module, and includes TDM-IP and IP-IP calls. | |
| acPMModulePacketJitterEntry | 1.3.6.1.4.1.5003.10.7.2.31.21.2.1 | not-accessible | ||
| U32 acPMModulePacketJitterInterval | 1.3.6.1.4.1.5003.10.7.2.31.21.2.1.1 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| G32 acPMModulePacketJitterVal | 1.3.6.1.4.1.5003.10.7.2.31.21.2.1.2 | Gauge32 | read-only | Value of gauge or counter. |
| I32 acPMModulePacketJitterAverage | 1.3.6.1.4.1.5003.10.7.2.31.21.2.1.3 | Integer32 | read-only | Average value with in the period time. |
| I32 acPMModulePacketJitterMax | 1.3.6.1.4.1.5003.10.7.2.31.21.2.1.4 | Integer32 | read-only | Maximum value with in the period time. |
| I32 acPMModulePacketJitterMin | 1.3.6.1.4.1.5003.10.7.2.31.21.2.1.5 | Integer32 | read-only | Minimum value with in the period time. |
| I32 acPMModulePacketJitterTimeBelowLowThreshold | 1.3.6.1.4.1.5003.10.7.2.31.21.2.1.6 | Integer32 | read-only | Percent of interval time for which gauge is below what was determined as the low threshold. |
| I32 acPMModulePacketJitterTimeBetweenThresholds | 1.3.6.1.4.1.5003.10.7.2.31.21.2.1.7 | Integer32 | read-only | Percent of interval time for which gauge is above what was determined as the high threshold. |
| I32 acPMModulePacketJitterTimeAboveHighThreshold | 1.3.6.1.4.1.5003.10.7.2.31.21.2.1.8 | Integer32 | read-only | Percent of interval time for which gauge is between what were determined as the low and high thresholds. |
| I32 acPMModulePacketJitterFullDayAverage | 1.3.6.1.4.1.5003.10.7.2.31.21.2.1.9 | Integer32 | read-only | The average of full 24 hours. |
| C32 acPMModulePacketJitterVolume | 1.3.6.1.4.1.5003.10.7.2.31.21.2.1.10 | Counter32 | read-only | Activity volume. |
| acPMModuleRTPBytesTxTable | 1.3.6.1.4.1.5003.10.7.2.31.21.3 | not-accessible | RTP bytes sent in RTCP data, per entire module. | |
| acPMModuleRTPBytesTxEntry | 1.3.6.1.4.1.5003.10.7.2.31.21.3.1 | not-accessible | ||
| U32 acPMModuleRTPBytesTxInterval | 1.3.6.1.4.1.5003.10.7.2.31.21.3.1.1 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| I32 acPMModuleRTPBytesTxAverage | 1.3.6.1.4.1.5003.10.7.2.31.21.3.1.2 | Integer32 | read-only | Average value with in the period time. |
| I32 acPMModuleRTPBytesTxMax | 1.3.6.1.4.1.5003.10.7.2.31.21.3.1.3 | Integer32 | read-only | Maximum value with in the period time. |
| I32 acPMModuleRTPBytesTxMin | 1.3.6.1.4.1.5003.10.7.2.31.21.3.1.4 | Integer32 | read-only | Minimum value with in the period time. |
| I32 acPMModuleRTPBytesTxTimeBelowLowThreshold | 1.3.6.1.4.1.5003.10.7.2.31.21.3.1.5 | Integer32 | read-only | Percent of interval time for which gauge is below what was determined as the low threshold. |
| I32 acPMModuleRTPBytesTxTimeBetweenThresholds | 1.3.6.1.4.1.5003.10.7.2.31.21.3.1.6 | Integer32 | read-only | Percent of interval time for which gauge is above what was determined as the high threshold. |
| I32 acPMModuleRTPBytesTxTimeAboveHighThreshold | 1.3.6.1.4.1.5003.10.7.2.31.21.3.1.7 | Integer32 | read-only | Percent of interval time for which gauge is between what were determined as the low and high thresholds. |
| I32 acPMModuleRTPBytesTxFullDayAverage | 1.3.6.1.4.1.5003.10.7.2.31.21.3.1.8 | Integer32 | read-only | The average of full 24 hours. |
| C32 acPMModuleRTPBytesTxVolume | 1.3.6.1.4.1.5003.10.7.2.31.21.3.1.9 | Counter32 | read-only | Activity volume. |
| acPMModuleRTPBytesRxTable | 1.3.6.1.4.1.5003.10.7.2.31.21.4 | not-accessible | RTP bytes received in RTCP data, per entire module. | |
| acPMModuleRTPBytesRxEntry | 1.3.6.1.4.1.5003.10.7.2.31.21.4.1 | not-accessible | ||
| U32 acPMModuleRTPBytesRxInterval | 1.3.6.1.4.1.5003.10.7.2.31.21.4.1.1 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| I32 acPMModuleRTPBytesRxAverage | 1.3.6.1.4.1.5003.10.7.2.31.21.4.1.2 | Integer32 | read-only | Average value with in the period time. |
| I32 acPMModuleRTPBytesRxMax | 1.3.6.1.4.1.5003.10.7.2.31.21.4.1.3 | Integer32 | read-only | Maximum value with in the period time. |
| I32 acPMModuleRTPBytesRxMin | 1.3.6.1.4.1.5003.10.7.2.31.21.4.1.4 | Integer32 | read-only | Minimum value with in the period time. |
| I32 acPMModuleRTPBytesRxTimeBelowLowThreshold | 1.3.6.1.4.1.5003.10.7.2.31.21.4.1.5 | Integer32 | read-only | Percent of interval time for which gauge is below what was determined as the low threshold. |
| I32 acPMModuleRTPBytesRxTimeBetweenThresholds | 1.3.6.1.4.1.5003.10.7.2.31.21.4.1.6 | Integer32 | read-only | Percent of interval time for which gauge is above what was determined as the high threshold. |
| I32 acPMModuleRTPBytesRxTimeAboveHighThreshold | 1.3.6.1.4.1.5003.10.7.2.31.21.4.1.7 | Integer32 | read-only | Percent of interval time for which gauge is between what were determined as the low and high thresholds. |
| I32 acPMModuleRTPBytesRxFullDayAverage | 1.3.6.1.4.1.5003.10.7.2.31.21.4.1.8 | Integer32 | read-only | The average of full 24 hours. |
| C32 acPMModuleRTPBytesRxVolume | 1.3.6.1.4.1.5003.10.7.2.31.21.4.1.9 | Counter32 | read-only | Activity volume. |
| acPMModuleRTPPacketsTxTable | 1.3.6.1.4.1.5003.10.7.2.31.21.5 | not-accessible | RTP packets sent in RTCP data, per entire module. | |
| acPMModuleRTPPacketsTxEntry | 1.3.6.1.4.1.5003.10.7.2.31.21.5.1 | not-accessible | ||
| U32 acPMModuleRTPPacketsTxInterval | 1.3.6.1.4.1.5003.10.7.2.31.21.5.1.1 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| I32 acPMModuleRTPPacketsTxAverage | 1.3.6.1.4.1.5003.10.7.2.31.21.5.1.2 | Integer32 | read-only | Average value with in the period time. |
| I32 acPMModuleRTPPacketsTxMax | 1.3.6.1.4.1.5003.10.7.2.31.21.5.1.3 | Integer32 | read-only | Maximum value with in the period time. |
| I32 acPMModuleRTPPacketsTxMin | 1.3.6.1.4.1.5003.10.7.2.31.21.5.1.4 | Integer32 | read-only | Minimum value with in the period time. |
| I32 acPMModuleRTPPacketsTxTimeBelowLowThreshold | 1.3.6.1.4.1.5003.10.7.2.31.21.5.1.5 | Integer32 | read-only | Percent of interval time for which gauge is below what was determined as the low threshold. |
| I32 acPMModuleRTPPacketsTxTimeBetweenThresholds | 1.3.6.1.4.1.5003.10.7.2.31.21.5.1.6 | Integer32 | read-only | Percent of interval time for which gauge is above what was determined as the high threshold. |
| I32 acPMModuleRTPPacketsTxTimeAboveHighThreshold | 1.3.6.1.4.1.5003.10.7.2.31.21.5.1.7 | Integer32 | read-only | Percent of interval time for which gauge is between what were determined as the low and high thresholds. |
| I32 acPMModuleRTPPacketsTxFullDayAverage | 1.3.6.1.4.1.5003.10.7.2.31.21.5.1.8 | Integer32 | read-only | The average of full 24 hours. |
| I32 acPMModuleRTPPacketsTxTotal | 1.3.6.1.4.1.5003.10.7.2.31.21.5.1.9 | Integer32 | read-only | Total since last reset. |
| C32 acPMModuleRTPPacketsTxVolume | 1.3.6.1.4.1.5003.10.7.2.31.21.5.1.10 | Counter32 | read-only | Activity volume. |
| acPMModuleRTPPacketsRxTable | 1.3.6.1.4.1.5003.10.7.2.31.21.6 | not-accessible | RTP packets received in RTCP data, per entire module. | |
| acPMModuleRTPPacketsRxEntry | 1.3.6.1.4.1.5003.10.7.2.31.21.6.1 | not-accessible | ||
| U32 acPMModuleRTPPacketsRxInterval | 1.3.6.1.4.1.5003.10.7.2.31.21.6.1.1 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| I32 acPMModuleRTPPacketsRxAverage | 1.3.6.1.4.1.5003.10.7.2.31.21.6.1.2 | Integer32 | read-only | Average value with in the period time. |
| I32 acPMModuleRTPPacketsRxMax | 1.3.6.1.4.1.5003.10.7.2.31.21.6.1.3 | Integer32 | read-only | Maximum value with in the period time. |
| I32 acPMModuleRTPPacketsRxMin | 1.3.6.1.4.1.5003.10.7.2.31.21.6.1.4 | Integer32 | read-only | Minimum value with in the period time. |
| I32 acPMModuleRTPPacketsRxTimeBelowLowThreshold | 1.3.6.1.4.1.5003.10.7.2.31.21.6.1.5 | Integer32 | read-only | Percent of interval time for which gauge is below what was determined as the low threshold. |
| I32 acPMModuleRTPPacketsRxTimeBetweenThresholds | 1.3.6.1.4.1.5003.10.7.2.31.21.6.1.6 | Integer32 | read-only | Percent of interval time for which gauge is above what was determined as the high threshold. |
| I32 acPMModuleRTPPacketsRxTimeAboveHighThreshold | 1.3.6.1.4.1.5003.10.7.2.31.21.6.1.7 | Integer32 | read-only | Percent of interval time for which gauge is between what were determined as the low and high thresholds. |
| I32 acPMModuleRTPPacketsRxFullDayAverage | 1.3.6.1.4.1.5003.10.7.2.31.21.6.1.8 | Integer32 | read-only | The average of full 24 hours. |
| I32 acPMModuleRTPPacketsRxTotal | 1.3.6.1.4.1.5003.10.7.2.31.21.6.1.9 | Integer32 | read-only | Total since last reset. |
| C32 acPMModuleRTPPacketsRxVolume | 1.3.6.1.4.1.5003.10.7.2.31.21.6.1.10 | Counter32 | read-only | Activity volume. |
| acPMChannelUtilization | 1.3.6.1.4.1.5003.10.7.2.41 | |||
| acPMFaxChannelsTable | 1.3.6.1.4.1.5003.10.7.2.41.1 | not-accessible | Total number of active fax channels. | |
| acPMFaxChannelsEntry | 1.3.6.1.4.1.5003.10.7.2.41.1.1 | not-accessible | ||
| U32 acPMFaxChannelsInterval | 1.3.6.1.4.1.5003.10.7.2.41.1.1.1 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| G32 acPMFaxChannelsVal | 1.3.6.1.4.1.5003.10.7.2.41.1.1.2 | Gauge32 | read-only | Value of gauge or counter. |
| I32 acPMFaxChannelsAverage | 1.3.6.1.4.1.5003.10.7.2.41.1.1.3 | Integer32 | read-only | Average value with in the period time. |
| I32 acPMFaxChannelsMax | 1.3.6.1.4.1.5003.10.7.2.41.1.1.4 | Integer32 | read-only | Maximum value with in the period time. |
| I32 acPMFaxChannelsMin | 1.3.6.1.4.1.5003.10.7.2.41.1.1.5 | Integer32 | read-only | Minimum value with in the period time. |
| I32 acPMFaxChannelsTimeBelowLowThreshold | 1.3.6.1.4.1.5003.10.7.2.41.1.1.6 | Integer32 | read-only | Percent of interval time for which gauge is below what was determined as the low threshold. |
| I32 acPMFaxChannelsTimeBetweenThresholds | 1.3.6.1.4.1.5003.10.7.2.41.1.1.7 | Integer32 | read-only | Percent of interval time for which gauge is above what was determined as the high threshold. |
| I32 acPMFaxChannelsTimeAboveHighThreshold | 1.3.6.1.4.1.5003.10.7.2.41.1.1.8 | Integer32 | read-only | Percent of interval time for which gauge is between what were determined as the low and high thresholds. |
| I32 acPMFaxChannelsFullDayAverage | 1.3.6.1.4.1.5003.10.7.2.41.1.1.9 | Integer32 | read-only | The average of full 24 hours. |
| C32 acPMFaxChannelsVolume | 1.3.6.1.4.1.5003.10.7.2.41.1.1.10 | Counter32 | read-only | Activity volume. |
| acPMModemChannelsTable | 1.3.6.1.4.1.5003.10.7.2.41.2 | not-accessible | Total number of active modem channels. | |
| acPMModemChannelsEntry | 1.3.6.1.4.1.5003.10.7.2.41.2.1 | not-accessible | ||
| U32 acPMModemChannelsInterval | 1.3.6.1.4.1.5003.10.7.2.41.2.1.1 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| G32 acPMModemChannelsVal | 1.3.6.1.4.1.5003.10.7.2.41.2.1.2 | Gauge32 | read-only | Value of gauge or counter. |
| I32 acPMModemChannelsAverage | 1.3.6.1.4.1.5003.10.7.2.41.2.1.3 | Integer32 | read-only | Average value within the period time. |
| I32 acPMModemChannelsMax | 1.3.6.1.4.1.5003.10.7.2.41.2.1.4 | Integer32 | read-only | Maximum value within the period time. |
| I32 acPMModemChannelsMin | 1.3.6.1.4.1.5003.10.7.2.41.2.1.5 | Integer32 | read-only | Minimum value within the period time. |
| I32 acPMModemChannelsTimeBelowLowThreshold | 1.3.6.1.4.1.5003.10.7.2.41.2.1.6 | Integer32 | read-only | Percent of interval time for which gauge is below what was determined as the low threshold. |
| I32 acPMModemChannelsTimeBetweenThresholds | 1.3.6.1.4.1.5003.10.7.2.41.2.1.7 | Integer32 | read-only | Percent of interval time for which gauge is above what was determined as the high threshold. |
| I32 acPMModemChannelsTimeAboveHighThreshold | 1.3.6.1.4.1.5003.10.7.2.41.2.1.8 | Integer32 | read-only | Percent of interval time for which gauge is between what were determined as the low and high thresholds. |
| I32 acPMModemChannelsFullDayAverage | 1.3.6.1.4.1.5003.10.7.2.41.2.1.9 | Integer32 | read-only | The average of full 24 hours. |
| acPMTdm2IpChannelsTable | 1.3.6.1.4.1.5003.10.7.2.41.3 | not-accessible | Total number of active TDM-to-IP channels. | |
| acPMTdm2IpChannelsEntry | 1.3.6.1.4.1.5003.10.7.2.41.3.1 | not-accessible | ||
| U32 acPMTdm2IpChannelsInterval | 1.3.6.1.4.1.5003.10.7.2.41.3.1.1 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| G32 acPMTdm2IpChannelsVal | 1.3.6.1.4.1.5003.10.7.2.41.3.1.2 | Gauge32 | read-only | Value of gauge or counter. |
| I32 acPMTdm2IpChannelsAverage | 1.3.6.1.4.1.5003.10.7.2.41.3.1.3 | Integer32 | read-only | Average value within the period time. |
| I32 acPMTdm2IpChannelsMax | 1.3.6.1.4.1.5003.10.7.2.41.3.1.4 | Integer32 | read-only | Maximum value within the period time. |
| I32 acPMTdm2IpChannelsMin | 1.3.6.1.4.1.5003.10.7.2.41.3.1.5 | Integer32 | read-only | Minimum value within the period time. |
| C32 acPMTdm2IpChannelsVolume | 1.3.6.1.4.1.5003.10.7.2.41.3.1.6 | Counter32 | read-only | Activity volume. |
| I32 acPMTdm2IpChannelsTimeBelowLowThreshold | 1.3.6.1.4.1.5003.10.7.2.41.3.1.7 | Integer32 | read-only | Percent of interval time for which gauge is below what was determined as the low threshold. |
| I32 acPMTdm2IpChannelsTimeBetweenThresholds | 1.3.6.1.4.1.5003.10.7.2.41.3.1.8 | Integer32 | read-only | Percent of interval time for which gauge is above what was determined as the high threshold. |
| I32 acPMTdm2IpChannelsTimeAboveHighThreshold | 1.3.6.1.4.1.5003.10.7.2.41.3.1.9 | Integer32 | read-only | Percent of interval time for which gauge is between what were determined as the low and high thresholds. |
| I32 acPMTdm2IpChannelsFullDayAverage | 1.3.6.1.4.1.5003.10.7.2.41.3.1.10 | Integer32 | read-only | The average of full 24 hours. |
| acPMRTPStreamsTable | 1.3.6.1.4.1.5003.10.7.2.41.4 | not-accessible | Total number of active RTP streams. | |
| acPMRTPStreamsEntry | 1.3.6.1.4.1.5003.10.7.2.41.4.1 | not-accessible | ||
| U32 acPMRTPStreamsInterval | 1.3.6.1.4.1.5003.10.7.2.41.4.1.1 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| G32 acPMRTPStreamsVal | 1.3.6.1.4.1.5003.10.7.2.41.4.1.2 | Gauge32 | read-only | Value of gauge or counter. |
| I32 acPMRTPStreamsAverage | 1.3.6.1.4.1.5003.10.7.2.41.4.1.3 | Integer32 | read-only | Average value within the period time. |
| I32 acPMRTPStreamsMax | 1.3.6.1.4.1.5003.10.7.2.41.4.1.4 | Integer32 | read-only | Maximum value within the period time. |
| I32 acPMRTPStreamsMin | 1.3.6.1.4.1.5003.10.7.2.41.4.1.5 | Integer32 | read-only | Minimum value within the period time. |
| C32 acPMRTPStreamsVolume | 1.3.6.1.4.1.5003.10.7.2.41.4.1.6 | Counter32 | read-only | Activity volume. |
| I32 acPMRTPStreamsTimeBelowLowThreshold | 1.3.6.1.4.1.5003.10.7.2.41.4.1.7 | Integer32 | read-only | Percent of interval time for which gauge is below what was determined as the low threshold. |
| I32 acPMRTPStreamsTimeBetweenThresholds | 1.3.6.1.4.1.5003.10.7.2.41.4.1.8 | Integer32 | read-only | Percent of interval time for which gauge is above what was determined as the high threshold. |
| I32 acPMRTPStreamsTimeAboveHighThreshold | 1.3.6.1.4.1.5003.10.7.2.41.4.1.9 | Integer32 | read-only | Percent of interval time for which gauge is between what were determined as the low and high thresholds. |
| I32 acPMRTPStreamsFullDayAverage | 1.3.6.1.4.1.5003.10.7.2.41.4.1.10 | Integer32 | read-only | The average of full 24 hours. |
| acPMSRTPStreamsTable | 1.3.6.1.4.1.5003.10.7.2.41.5 | not-accessible | Total number of active SRTP streams. | |
| acPMSRTPStreamsEntry | 1.3.6.1.4.1.5003.10.7.2.41.5.1 | not-accessible | ||
| U32 acPMSRTPStreamsInterval | 1.3.6.1.4.1.5003.10.7.2.41.5.1.1 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| G32 acPMSRTPStreamsVal | 1.3.6.1.4.1.5003.10.7.2.41.5.1.2 | Gauge32 | read-only | Value of gauge or counter. |
| I32 acPMSRTPStreamsAverage | 1.3.6.1.4.1.5003.10.7.2.41.5.1.3 | Integer32 | read-only | Average value within the period time. |
| I32 acPMSRTPStreamsMax | 1.3.6.1.4.1.5003.10.7.2.41.5.1.4 | Integer32 | read-only | Maximum value within the period time. |
| I32 acPMSRTPStreamsMin | 1.3.6.1.4.1.5003.10.7.2.41.5.1.5 | Integer32 | read-only | Minimum value within the period time. |
| C32 acPMSRTPStreamsVolume | 1.3.6.1.4.1.5003.10.7.2.41.5.1.6 | Counter32 | read-only | Activity volume. |
| I32 acPMSRTPStreamsTimeBelowLowThreshold | 1.3.6.1.4.1.5003.10.7.2.41.5.1.7 | Integer32 | read-only | Percent of interval time for which gauge is below what was determined as the low threshold. |
| I32 acPMSRTPStreamsTimeBetweenThresholds | 1.3.6.1.4.1.5003.10.7.2.41.5.1.8 | Integer32 | read-only | Percent of interval time for which gauge is above what was determined as the high threshold. |
| I32 acPMSRTPStreamsTimeAboveHighThreshold | 1.3.6.1.4.1.5003.10.7.2.41.5.1.9 | Integer32 | read-only | Percent of interval time for which gauge is between what were determined as the low and high thresholds. |
| I32 acPMSRTPStreamsFullDayAverage | 1.3.6.1.4.1.5003.10.7.2.41.5.1.10 | Integer32 | read-only | The average of full 24 hours. |
| acPMMulticastRegisteredChannelsTable | 1.3.6.1.4.1.5003.10.7.2.41.6 | not-accessible | Total number of active channels connected to a multicast source. | |
| acPMMulticastRegisteredChannelsEntry | 1.3.6.1.4.1.5003.10.7.2.41.6.1 | not-accessible | ||
| U32 acPMMulticastRegisteredChannelsInterval | 1.3.6.1.4.1.5003.10.7.2.41.6.1.1 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| G32 acPMMulticastRegisteredChannelsVal | 1.3.6.1.4.1.5003.10.7.2.41.6.1.2 | Gauge32 | read-only | Value of gauge or counter. |
| I32 acPMMulticastRegisteredChannelsAverage | 1.3.6.1.4.1.5003.10.7.2.41.6.1.3 | Integer32 | read-only | Average value within the period time. |
| I32 acPMMulticastRegisteredChannelsMax | 1.3.6.1.4.1.5003.10.7.2.41.6.1.4 | Integer32 | read-only | Maximum value within the period time. |
| I32 acPMMulticastRegisteredChannelsMin | 1.3.6.1.4.1.5003.10.7.2.41.6.1.5 | Integer32 | read-only | Minimum value within the period time. |
| C32 acPMMulticastRegisteredChannelsVolume | 1.3.6.1.4.1.5003.10.7.2.41.6.1.6 | Counter32 | read-only | Activity volume. |
| I32 acPMMulticastRegisteredChannelsTimeBelowLowThreshold | 1.3.6.1.4.1.5003.10.7.2.41.6.1.7 | Integer32 | read-only | Percent of interval time for which gauge is below what was determined as the low threshold. |
| I32 acPMMulticastRegisteredChannelsTimeBetweenThresholds | 1.3.6.1.4.1.5003.10.7.2.41.6.1.8 | Integer32 | read-only | Percent of interval time for which gauge is above what was determined as the high threshold. |
| I32 acPMMulticastRegisteredChannelsTimeAboveHighThreshold | 1.3.6.1.4.1.5003.10.7.2.41.6.1.9 | Integer32 | read-only | Percent of interval time for which gauge is between what were determined as the low and high thresholds. |
| I32 acPMMulticastRegisteredChannelsFullDayAverage | 1.3.6.1.4.1.5003.10.7.2.41.6.1.10 | Integer32 | read-only | The average of full 24 hours. |
| acPMModemRelayActiveChannelsTable | 1.3.6.1.4.1.5003.10.7.2.41.7 | not-accessible | Number of active modem relay (V150.1) channels. | |
| acPMModemRelayActiveChannelsEntry | 1.3.6.1.4.1.5003.10.7.2.41.7.1 | not-accessible | ||
| U32 acPMModemRelayActiveChannelsInterval | 1.3.6.1.4.1.5003.10.7.2.41.7.1.1 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| G32 acPMModemRelayActiveChannelsVal | 1.3.6.1.4.1.5003.10.7.2.41.7.1.2 | Gauge32 | read-only | Value of gauge or counter. |
| I32 acPMModemRelayActiveChannelsAverage | 1.3.6.1.4.1.5003.10.7.2.41.7.1.3 | Integer32 | read-only | Average value within the period time. |
| I32 acPMModemRelayActiveChannelsMax | 1.3.6.1.4.1.5003.10.7.2.41.7.1.4 | Integer32 | read-only | Maximum value within the period time. |
| I32 acPMModemRelayActiveChannelsMin | 1.3.6.1.4.1.5003.10.7.2.41.7.1.5 | Integer32 | read-only | Minimum value within the period time. |
| C32 acPMModemRelayActiveChannelsVolume | 1.3.6.1.4.1.5003.10.7.2.41.7.1.6 | Counter32 | read-only | Activity volume. |
| I32 acPMModemRelayActiveChannelsTimeBelowLowThreshold | 1.3.6.1.4.1.5003.10.7.2.41.7.1.7 | Integer32 | read-only | Percent of interval time for which gauge is below what was determined as the low threshold. |
| I32 acPMModemRelayActiveChannelsTimeBetweenThresholds | 1.3.6.1.4.1.5003.10.7.2.41.7.1.8 | Integer32 | read-only | Percent of interval time for which gauge is above what was determined as the high threshold. |
| I32 acPMModemRelayActiveChannelsTimeAboveHighThreshold | 1.3.6.1.4.1.5003.10.7.2.41.7.1.9 | Integer32 | read-only | Percent of interval time for which gauge is between what were determined as the low and high thresholds. |
| I32 acPMModemRelayActiveChannelsFullDayAverage | 1.3.6.1.4.1.5003.10.7.2.41.7.1.10 | Integer32 | read-only | The average of full 24 hours. |
| acPMStreamingCache | 1.3.6.1.4.1.5003.10.7.2.42 | |||
| acPMStreamingCacheHitRateTable | 1.3.6.1.4.1.5003.10.7.2.42.1 | not-accessible | Hit count rate of streaming cache | |
| acPMStreamingCacheHitRateEntry | 1.3.6.1.4.1.5003.10.7.2.42.1.1 | not-accessible | ||
| U32 acPMStreamingCacheHitRateInterval | 1.3.6.1.4.1.5003.10.7.2.42.1.1.1 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| I32 acPMStreamingCacheHitRateAverage | 1.3.6.1.4.1.5003.10.7.2.42.1.1.2 | Integer32 | read-only | Average value within the period time. |
| I32 acPMStreamingCacheHitRateMax | 1.3.6.1.4.1.5003.10.7.2.42.1.1.3 | Integer32 | read-only | Maximum value within the period time. |
| I32 acPMStreamingCacheHitRateMin | 1.3.6.1.4.1.5003.10.7.2.42.1.1.4 | Integer32 | read-only | Minimum value within the period time. |
| C32 acPMStreamingCacheHitRateVolume | 1.3.6.1.4.1.5003.10.7.2.42.1.1.5 | Counter32 | read-only | Activity volume. |
| I32 acPMStreamingCacheHitRateTimeBelowLowThreshold | 1.3.6.1.4.1.5003.10.7.2.42.1.1.6 | Integer32 | read-only | Percent of interval time for which gauge is below what was determined as the low threshold. |
| I32 acPMStreamingCacheHitRateTimeBetweenThresholds | 1.3.6.1.4.1.5003.10.7.2.42.1.1.7 | Integer32 | read-only | Percent of interval time for which gauge is above what was determined as the high threshold. |
| I32 acPMStreamingCacheHitRateTimeAboveHighThreshold | 1.3.6.1.4.1.5003.10.7.2.42.1.1.8 | Integer32 | read-only | Percent of interval time for which gauge is between what were determined as the low and high thresholds. |
| I32 acPMStreamingCacheHitRateFullDayAverage | 1.3.6.1.4.1.5003.10.7.2.42.1.1.9 | Integer32 | read-only | The average of full 24 hours. |
| acPMStreamingCacheMissRateTable | 1.3.6.1.4.1.5003.10.7.2.42.2 | not-accessible | Miss count rate of streaming cache | |
| acPMStreamingCacheMissRateEntry | 1.3.6.1.4.1.5003.10.7.2.42.2.1 | not-accessible | ||
| U32 acPMStreamingCacheMissRateInterval | 1.3.6.1.4.1.5003.10.7.2.42.2.1.1 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| I32 acPMStreamingCacheMissRateAverage | 1.3.6.1.4.1.5003.10.7.2.42.2.1.2 | Integer32 | read-only | Average value within the period time. |
| I32 acPMStreamingCacheMissRateMax | 1.3.6.1.4.1.5003.10.7.2.42.2.1.3 | Integer32 | read-only | Maximum value within the period time. |
| I32 acPMStreamingCacheMissRateMin | 1.3.6.1.4.1.5003.10.7.2.42.2.1.4 | Integer32 | read-only | Minimum value within the period time. |
| C32 acPMStreamingCacheMissRateVolume | 1.3.6.1.4.1.5003.10.7.2.42.2.1.5 | Counter32 | read-only | Activity volume. |
| I32 acPMStreamingCacheMissRateTimeBelowLowThreshold | 1.3.6.1.4.1.5003.10.7.2.42.2.1.6 | Integer32 | read-only | Percent of interval time for which gauge is below what was determined as the low threshold. |
| I32 acPMStreamingCacheMissRateTimeBetweenThresholds | 1.3.6.1.4.1.5003.10.7.2.42.2.1.7 | Integer32 | read-only | Percent of interval time for which gauge is above what was determined as the high threshold. |
| I32 acPMStreamingCacheMissRateTimeAboveHighThreshold | 1.3.6.1.4.1.5003.10.7.2.42.2.1.8 | Integer32 | read-only | Percent of interval time for which gauge is between what were determined as the low and high thresholds. |
| I32 acPMStreamingCacheMissRateFullDayAverage | 1.3.6.1.4.1.5003.10.7.2.42.2.1.9 | Integer32 | read-only | The average of full 24 hours. |
| acPMStreamingCacheServerRequestsRateTable | 1.3.6.1.4.1.5003.10.7.2.42.3 | not-accessible | Server requests count rate of streaming cache | |
| acPMStreamingCacheServerRequestsRateEntry | 1.3.6.1.4.1.5003.10.7.2.42.3.1 | not-accessible | ||
| U32 acPMStreamingCacheServerRequestsRateInterval | 1.3.6.1.4.1.5003.10.7.2.42.3.1.1 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| I32 acPMStreamingCacheServerRequestsRateAverage | 1.3.6.1.4.1.5003.10.7.2.42.3.1.2 | Integer32 | read-only | Average value within the period time. |
| I32 acPMStreamingCacheServerRequestsRateMax | 1.3.6.1.4.1.5003.10.7.2.42.3.1.3 | Integer32 | read-only | Maximum value within the period time. |
| I32 acPMStreamingCacheServerRequestsRateMin | 1.3.6.1.4.1.5003.10.7.2.42.3.1.4 | Integer32 | read-only | Minimum value within the period time. |
| C32 acPMStreamingCacheServerRequestsRateVolume | 1.3.6.1.4.1.5003.10.7.2.42.3.1.5 | Counter32 | read-only | Activity volume. |
| I32 acPMStreamingCacheServerRequestsRateTimeBelowLowThreshold | 1.3.6.1.4.1.5003.10.7.2.42.3.1.6 | Integer32 | read-only | Percent of interval time for which gauge is below what was determined as the low threshold. |
| I32 acPMStreamingCacheServerRequestsRateTimeBetweenThresholds | 1.3.6.1.4.1.5003.10.7.2.42.3.1.7 | Integer32 | read-only | Percent of interval time for which gauge is above what was determined as the high threshold. |
| I32 acPMStreamingCacheServerRequestsRateTimeAboveHighThreshold | 1.3.6.1.4.1.5003.10.7.2.42.3.1.8 | Integer32 | read-only | Percent of interval time for which gauge is between what were determined as the low and high thresholds. |
| I32 acPMStreamingCacheServerRequestsRateFullDayAverage | 1.3.6.1.4.1.5003.10.7.2.42.3.1.9 | Integer32 | read-only | The average of full 24 hours. |
RFC description
Provides performance monitoring statistics for media (RTP/RTCP) streams on AudioCodes gateways, including jitter, packet loss, and MOS score estimates.
Start monitoring AudioCodes Mediant-series gateways/SBCs with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.