All MIBs › AC-PM-CONTROL-MIB
Organization: AudioCodes Ltd
Last Updated: 2009-08-25
Category: Device Management, Vendor: AudioCodes
Description: Manages performance monitoring collection intervals and threshold configuration on AudioCodes devices, controlling when and how PM data is gathered and reported.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is AC-PM-CONTROL-MIB?
AC-PM-CONTROL-MIB is a large vendor-specific MIB from AudioCodes that implements Performance Monitoring for control-plane/signaling elements on AudioCodes media gateways and session border controllers, sitting under the acPerformance branch of AUDIOCODES-TYPES-MIB. Its acPMControlConfiguration subtree sets the global monitoring interval (acPMControlConfigurationPeriodLength) and per-protocol thresholds for MEGACO, SIP, and control-protocol connection attributes, while acPMControlData holds the actual measured tables, organized by protocol family: acPMCPConnection (connection lifetime, state, command counters, retransmissions, and active-context counts for the underlying control protocol), acPMMegaco (service-change and command success/failure counters, including loopback and handover-related failures), acPMMGCP (RSIP reasons, generated DLCX/NTFY counts, and command success/failure tables), and acPMSIP (attempted, established, busy, no-answer, no-route, failed, forwarded, and fax-related call counters, plus trunk-group-level established-call tables). It depends on AUDIOCODES-TYPES-MIB for its enterprise OID anchor and on SNMP-FRAMEWORK-MIB for SnmpAdminString. It is deployed on AudioCodes VoIP gateways and SBCs to give operators SLA-relevant call-signaling health metrics, and engineers can download the AC-PM-CONTROL-MIB file to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in AC-PM-CONTROL-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- AudioCodes media gateways and session border controllers
Monitoring Examples
An operator polls acPMSIPFailCallsTable and acPMSIPNoRouteCallsTable over successive intervals to check for a rising failure rate relative to acPMSIPAttemptedCallsTable; a spike in no-route or failed calls combined with growing acPMCPConnectionStateTable retransmission counts would point to signaling instability between the gateway and its upstream SIP peer or softswitch.
What Can Be Monitored
- SIP call attempt/success/failure/busy/no-answer/no-route counters
- MEGACO/MGCP command success and failure counters
- control-protocol connection lifetime and retransmission counts
- active call-context counts
- PM interval length and per-table threshold configuration
This MIB depends on
Related MIBs
Imported Objects
From AUDIOCODES-TYPES-MIB
| acBoardMibs | OBJECT-IDENTITY |
| acGeneric | OBJECT-IDENTITY |
| acPerformance | OBJECT-IDENTITY |
| acProducts | OBJECT-IDENTITY |
| acRegistrations | OBJECT-IDENTITY |
| audioCodes | OBJECT-IDENTITY |
From RFC1155-SMI
| IpAddress |
From SNMP-FRAMEWORK-MIB
| SnmpAdminString |
From SNMPv2-SMI
| Integer32 | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 | |
| enterprises |
From SNMPv2-TC
| DateAndTime | |
| DisplayString | |
| TAddress | |
| TEXTUAL-CONVENTION |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| I32 acPMActiveContextCountAverage | 1.3.6.1.4.1.5003.10.8.2.31.5.1.3 | Integer32 | read-only | Average value with in the period time. |
| acPMActiveContextCountEntry | 1.3.6.1.4.1.5003.10.8.2.31.5.1 | not-accessible | ||
| I32 acPMActiveContextCountFullDayAverage | 1.3.6.1.4.1.5003.10.8.2.31.5.1.10 | Integer32 | read-only | The average of full 24 hours. |
| U32 acPMActiveContextCountInterval | 1.3.6.1.4.1.5003.10.8.2.31.5.1.1 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| I32 acPMActiveContextCountMax | 1.3.6.1.4.1.5003.10.8.2.31.5.1.4 | Integer32 | read-only | Maximum value with in the period time. |
| I32 acPMActiveContextCountMin | 1.3.6.1.4.1.5003.10.8.2.31.5.1.5 | Integer32 | read-only | Minimum value with in the period time. |
| acPMActiveContextCountTable | 1.3.6.1.4.1.5003.10.8.2.31.5 | not-accessible | Number of active contexts | |
| I32 acPMActiveContextCountTimeAboveHighThreshold | 1.3.6.1.4.1.5003.10.8.2.31.5.1.9 | Integer32 | read-only | Percent of interval time for which gauge is between what were determined as the low and high thresholds. |
| I32 acPMActiveContextCountTimeBelowLowThreshold | 1.3.6.1.4.1.5003.10.8.2.31.5.1.7 | Integer32 | read-only | Percent of interval time for which gauge is below what was determined as the low threshold. |
| I32 acPMActiveContextCountTimeBetweenThresholds | 1.3.6.1.4.1.5003.10.8.2.31.5.1.8 | Integer32 | read-only | Percent of interval time for which gauge is above what was determined as the high threshold. |
| I32 acPMActiveContextCountTotal | 1.3.6.1.4.1.5003.10.8.2.31.5.1.11 | Integer32 | read-only | Total since last reset. |
| G32 acPMActiveContextCountVal | 1.3.6.1.4.1.5003.10.8.2.31.5.1.2 | Gauge32 | read-only | Value of gauge or counter. |
| C32 acPMActiveContextCountVolume | 1.3.6.1.4.1.5003.10.8.2.31.5.1.6 | Counter32 | read-only | Activity volume. |
| acPMControl | 1.3.6.1.4.1.5003.10.8 | The AC-PM-Control MIB offers performance monitoring For the Control related elements in Audiocodes' devices. The Configuration sub-tree is for configuring the interval Period length for the entire AC-PM-Control MIB, and the different tables' thresholds. The Data sub-tree presents the tables of monitored elements. Note - for the entire MIB the value (-1) means the value Asked for is either not supported or currently not relevant (this is for when values asked for are for intervals not yet recorded. | ||
| acPMControlConfiguration | 1.3.6.1.4.1.5003.10.8.1 | |||
| U32 acPMControlConfigurationPeriodLength | 1.3.6.1.4.1.5003.10.8.1.1 | Unsigned32 | read-write | Length of monitoring intervals for entire MIB. Time is in minutes. Access: Instant. |
| INT acPMControlConfigurationResetTotalCounters | 1.3.6.1.4.1.5003.10.8.1.2 | INTEGER | read-write | Total-Counters Reset. To reset the total counters, set the value of this object to resetTotalCounters(2). Access: Instant. |
| acPMControlData | 1.3.6.1.4.1.5003.10.8.2 | |||
| U32 acPMControlDataAcPMControlTimeFromStartOfInterval | 1.3.6.1.4.1.5003.10.8.2.1 | Unsigned32 | read-only | The time in seconds since the start of the current interval. MIB specific. |
| I32 acPMCPCallAttemptsPerSecAverage | 1.3.6.1.4.1.5003.10.8.2.31.10.1.3 | Integer32 | read-only | Average value with in the period time. |
| acPMCPCallAttemptsPerSecEntry | 1.3.6.1.4.1.5003.10.8.2.31.10.1 | not-accessible | ||
| U32 acPMCPCallAttemptsPerSecInterval | 1.3.6.1.4.1.5003.10.8.2.31.10.1.1 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| I32 acPMCPCallAttemptsPerSecMax | 1.3.6.1.4.1.5003.10.8.2.31.10.1.4 | Integer32 | read-only | Maximum value with in the period time. |
| I32 acPMCPCallAttemptsPerSecMin | 1.3.6.1.4.1.5003.10.8.2.31.10.1.5 | Integer32 | read-only | Minimum value with in the period time. |
| acPMCPCallAttemptsPerSecTable | 1.3.6.1.4.1.5003.10.8.2.31.10 | not-accessible | Number of Call attempts (successful and unsuccessful) for second | |
| G32 acPMCPCallAttemptsPerSecVal | 1.3.6.1.4.1.5003.10.8.2.31.10.1.2 | Gauge32 | read-only | Value of gauge or counter. |
| C32 acPMCPCallAttemptsPerSecVolume | 1.3.6.1.4.1.5003.10.8.2.31.10.1.6 | Counter32 | read-only | Activity volume. |
| INT acPMCPCmdFailureCountCommandType | 1.3.6.1.4.1.5003.10.8.2.41.3.1.1 | INTEGER | not-accessible | Command type: 0=add, 1=move, 2=modify, 3=subtract, 4=SC, 5=AuditValue, 6=AuditCapabilities, 7=Notify. |
| acPMCPCmdFailureCountEntry | 1.3.6.1.4.1.5003.10.8.2.41.3.1 | not-accessible | ||
| U32 acPMCPCmdFailureCountInterval | 1.3.6.1.4.1.5003.10.8.2.41.3.1.2 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| acPMCPCmdFailureCountTable | 1.3.6.1.4.1.5003.10.8.2.41.3 | not-accessible | Number of failing commands, per command type. Index: 0=add, 1=move, 2=modify, 3=subtract, 4=SC, 5=AuditValue, 6=AuditCapabilities, 7=Notify | |
| I32 acPMCPCmdFailureCountTotal | 1.3.6.1.4.1.5003.10.8.2.41.3.1.4 | Integer32 | read-only | Total since last reset. |
| G32 acPMCPCmdFailureCountVal | 1.3.6.1.4.1.5003.10.8.2.41.3.1.3 | Gauge32 | read-only | Value of gauge or counter. |
| I32 acPMcpCmdProcessTimeAverage | 1.3.6.1.4.1.5003.10.8.2.31.8.1.3 | Integer32 | read-only | Average value with in the period time. |
| acPMcpCmdProcessTimeEntry | 1.3.6.1.4.1.5003.10.8.2.31.8.1 | not-accessible | ||
| I32 acPMcpCmdProcessTimeFullDayAverage | 1.3.6.1.4.1.5003.10.8.2.31.8.1.10 | Integer32 | read-only | The average of full 24 hours. |
| U32 acPMcpCmdProcessTimeInterval | 1.3.6.1.4.1.5003.10.8.2.31.8.1.1 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| I32 acPMcpCmdProcessTimeMax | 1.3.6.1.4.1.5003.10.8.2.31.8.1.4 | Integer32 | read-only | Maximum value with in the period time. |
| I32 acPMcpCmdProcessTimeMin | 1.3.6.1.4.1.5003.10.8.2.31.8.1.5 | Integer32 | read-only | Minimum value with in the period time. |
| acPMcpCmdProcessTimeTable | 1.3.6.1.4.1.5003.10.8.2.31.8 | not-accessible | Processing time (in Microseconds), per command type. | |
| I32 acPMcpCmdProcessTimeTimeAboveHighThreshold | 1.3.6.1.4.1.5003.10.8.2.31.8.1.9 | Integer32 | read-only | Percent of interval time for which gauge is between what were determined as the low and high thresholds. |
| I32 acPMcpCmdProcessTimeTimeBelowLowThreshold | 1.3.6.1.4.1.5003.10.8.2.31.8.1.7 | Integer32 | read-only | Percent of interval time for which gauge is below what was determined as the low threshold. |
| I32 acPMcpCmdProcessTimeTimeBetweenThresholds | 1.3.6.1.4.1.5003.10.8.2.31.8.1.8 | Integer32 | read-only | Percent of interval time for which gauge is above what was determined as the high threshold. |
| I32 acPMcpCmdProcessTimeTotal | 1.3.6.1.4.1.5003.10.8.2.31.8.1.11 | Integer32 | read-only | Total since last reset. |
| G32 acPMcpCmdProcessTimeVal | 1.3.6.1.4.1.5003.10.8.2.31.8.1.2 | Gauge32 | read-only | Value of gauge or counter. |
| C32 acPMcpCmdProcessTimeVolume | 1.3.6.1.4.1.5003.10.8.2.31.8.1.6 | Counter32 | read-only | Activity volume. |
| INT acPMCPCmdSuccessCountCommandType | 1.3.6.1.4.1.5003.10.8.2.41.2.1.1 | INTEGER | not-accessible | Command type: 0=add, 1=move, 2=modify, 3=subtract, 4=SC, 5=AuditValue, 6=AuditCapabilities, 7=Notify. |
| acPMCPCmdSuccessCountEntry | 1.3.6.1.4.1.5003.10.8.2.41.2.1 | not-accessible | ||
| U32 acPMCPCmdSuccessCountInterval | 1.3.6.1.4.1.5003.10.8.2.41.2.1.2 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| acPMCPCmdSuccessCountTable | 1.3.6.1.4.1.5003.10.8.2.41.2 | not-accessible | Number of successful commands, per command type. Index: 0=add, 1=move, 2=modify, 3=subtract, 4=SC, 5=AuditValue, 6=AuditCapabilities, 7=Notify | |
| I32 acPMCPCmdSuccessCountTotal | 1.3.6.1.4.1.5003.10.8.2.41.2.1.4 | Integer32 | read-only | Total since last reset. |
| G32 acPMCPCmdSuccessCountVal | 1.3.6.1.4.1.5003.10.8.2.41.2.1.3 | Gauge32 | read-only | Value of gauge or counter. |
| INT acPMCPCommandCounterDirection | 1.3.6.1.4.1.5003.10.8.2.31.3.1.1 | INTEGER | not-accessible | Direction index. 0 - transmit 1 - receive. |
| acPMCPCommandCounterEntry | 1.3.6.1.4.1.5003.10.8.2.31.3.1 | not-accessible | ||
| U32 acPMCPCommandCounterInterval | 1.3.6.1.4.1.5003.10.8.2.31.3.1.2 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| acPMCPCommandCounterTable | 1.3.6.1.4.1.5003.10.8.2.31.3 | not-accessible | MGC command/response counters. Index: 0=sent commands, 1=received commands | |
| I32 acPMCPCommandCounterTotal | 1.3.6.1.4.1.5003.10.8.2.31.3.1.4 | Integer32 | read-only | Total since last reset. |
| C32 acPMCPCommandCounterVal | 1.3.6.1.4.1.5003.10.8.2.31.3.1.3 | Counter32 | read-only | Value of gauge or counter. |
| INT acPMCPCommandFailureCountCommandType | 1.3.6.1.4.1.5003.10.8.2.31.7.1.1 | INTEGER | not-accessible | Command type: 0=add, 1=move, 2=modify, 3=subtract, 4=SC, 5=AuditValue, 6=AuditCapabilities, 7=Notify. |
| acPMCPCommandFailureCountEntry | 1.3.6.1.4.1.5003.10.8.2.31.7.1 | not-accessible | ||
| U32 acPMCPCommandFailureCountInterval | 1.3.6.1.4.1.5003.10.8.2.31.7.1.2 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| acPMCPCommandFailureCountTable | 1.3.6.1.4.1.5003.10.8.2.31.7 | not-accessible | Number of failing commands, per command type. Index: 0=add, 1=move, 2=modify, 3=subtract, 4=SC, 5=AuditValue, 6=AuditCapabilities, 7=Notify | |
| I32 acPMCPCommandFailureCountTotal | 1.3.6.1.4.1.5003.10.8.2.31.7.1.4 | Integer32 | read-only | Total since last reset. |
| G32 acPMCPCommandFailureCountVal | 1.3.6.1.4.1.5003.10.8.2.31.7.1.3 | Gauge32 | read-only | Value of gauge or counter. |
| INT acPMCPCommandSuccessCountCommandType | 1.3.6.1.4.1.5003.10.8.2.31.6.1.1 | INTEGER | not-accessible | Command type: 0=add, 1=move, 2=modify, 3=subtract, 4=SC, 5=AuditValue, 6=AuditCapabilities, 7=Notify. |
| acPMCPCommandSuccessCountEntry | 1.3.6.1.4.1.5003.10.8.2.31.6.1 | not-accessible | ||
| U32 acPMCPCommandSuccessCountInterval | 1.3.6.1.4.1.5003.10.8.2.31.6.1.2 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| acPMCPCommandSuccessCountTable | 1.3.6.1.4.1.5003.10.8.2.31.6 | not-accessible | Number of successful commands, per command type. Index: 0=add, 1=move, 2=modify, 3=subtract, 4=SC, 5=AuditValue, 6=AuditCapabilities, 7=Notify | |
| I32 acPMCPCommandSuccessCountTotal | 1.3.6.1.4.1.5003.10.8.2.31.6.1.4 | Integer32 | read-only | Total since last reset. |
| G32 acPMCPCommandSuccessCountVal | 1.3.6.1.4.1.5003.10.8.2.31.6.1.3 | Gauge32 | read-only | Value of gauge or counter. |
| acPMCPConnection | 1.3.6.1.4.1.5003.10.8.2.31 | |||
| acPMCPConnectionAttributes | 1.3.6.1.4.1.5003.10.8.1.32 | |||
| U32 acPMCPConnectionAttributesActiveContextCountHighThreshold | 1.3.6.1.4.1.5003.10.8.1.32.9 | Unsigned32 | read-write | High threshold. Access: Instant. |
| U32 acPMCPConnectionAttributesActiveContextCountLowThreshold | 1.3.6.1.4.1.5003.10.8.1.32.10 | Unsigned32 | read-write | Low threshold. Access: Instant. |
| U32 acPMCPConnectionAttributesCommandCounterHighThreshold | 1.3.6.1.4.1.5003.10.8.1.32.5 | Unsigned32 | read-write | High threshold. Access: Instant. |
| U32 acPMCPConnectionAttributesCommandCounterLowThreshold | 1.3.6.1.4.1.5003.10.8.1.32.6 | Unsigned32 | read-write | Low threshold. Access: Instant. |
| U32 acPMCPConnectionAttributesCommandFailureCountHighThreshold | 1.3.6.1.4.1.5003.10.8.1.32.13 | Unsigned32 | read-write | High threshold. Access: Instant. |
| U32 acPMCPConnectionAttributesCommandFailureCountLowThreshold | 1.3.6.1.4.1.5003.10.8.1.32.14 | Unsigned32 | read-write | Low threshold. Access: Instant. |
| U32 acPMCPConnectionAttributesCommandProcessTimeHighThreshold | 1.3.6.1.4.1.5003.10.8.1.32.15 | Unsigned32 | read-write | High threshold. Access: Instant. |
| U32 acPMCPConnectionAttributesCommandProcessTimeLowThreshold | 1.3.6.1.4.1.5003.10.8.1.32.16 | Unsigned32 | read-write | Low threshold. Access: Instant. |
| U32 acPMCPConnectionAttributesCommandSuccessCountHighThreshold | 1.3.6.1.4.1.5003.10.8.1.32.11 | Unsigned32 | read-write | High threshold. Access: Instant. |
| U32 acPMCPConnectionAttributesCommandSuccessCountLowThreshold | 1.3.6.1.4.1.5003.10.8.1.32.12 | Unsigned32 | read-write | Low threshold. Access: Instant. |
| U32 acPMCPConnectionAttributesLifetimeHighThreshold | 1.3.6.1.4.1.5003.10.8.1.32.1 | Unsigned32 | read-write | High threshold. Access: Instant. |
| U32 acPMCPConnectionAttributesLifetimeLowThreshold | 1.3.6.1.4.1.5003.10.8.1.32.2 | Unsigned32 | read-write | Low threshold. Access: Instant. |
| U32 acPMCPConnectionAttributesRetransmissionCountHighThreshold | 1.3.6.1.4.1.5003.10.8.1.32.7 | Unsigned32 | read-write | High threshold. Access: Instant. |
| U32 acPMCPConnectionAttributesRetransmissionCountLowThreshold | 1.3.6.1.4.1.5003.10.8.1.32.8 | Unsigned32 | read-write | Low threshold. Access: Instant. |
| U32 acPMCPConnectionAttributesStateHighThreshold | 1.3.6.1.4.1.5003.10.8.1.32.3 | Unsigned32 | read-write | High threshold. Access: Instant. |
| U32 acPMCPConnectionAttributesStateLowThreshold | 1.3.6.1.4.1.5003.10.8.1.32.4 | Unsigned32 | read-write | Low threshold. Access: Instant. |
| U32 acPMCPConnectionAttributesTransactionProcessTimerHighThreshold | 1.3.6.1.4.1.5003.10.8.1.32.17 | Unsigned32 | read-write | High threshold. Access: Instant. |
| U32 acPMCPConnectionAttributesTransactionProcessTimerLowThreshold | 1.3.6.1.4.1.5003.10.8.1.32.18 | Unsigned32 | read-write | Low threshold. Access: Instant. |
| I32 acPMCPConnectionLifetimeAverage | 1.3.6.1.4.1.5003.10.8.2.31.1.1.3 | Integer32 | read-only | Average value with in the period time. |
| acPMCPConnectionLifetimeEntry | 1.3.6.1.4.1.5003.10.8.2.31.1.1 | not-accessible | ||
| I32 acPMCPConnectionLifetimeFullDayAverage | 1.3.6.1.4.1.5003.10.8.2.31.1.1.10 | Integer32 | read-only | The average of full 24 hours. |
| U32 acPMCPConnectionLifetimeInterval | 1.3.6.1.4.1.5003.10.8.2.31.1.1.1 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last 3 - Two before last 4 - Three before last. |
| I32 acPMCPConnectionLifetimeMax | 1.3.6.1.4.1.5003.10.8.2.31.1.1.4 | Integer32 | read-only | Maximum value with in the period time. |
| I32 acPMCPConnectionLifetimeMin | 1.3.6.1.4.1.5003.10.8.2.31.1.1.5 | Integer32 | read-only | Minimum value with in the period time. |
| acPMCPConnectionLifetimeTable | 1.3.6.1.4.1.5003.10.8.2.31.1 | not-accessible | Connection lifetime in seconds. | |
| I32 acPMCPConnectionLifetimeTimeAboveHighThreshold | 1.3.6.1.4.1.5003.10.8.2.31.1.1.9 | Integer32 | read-only | Percent of interval time for which gauge is between what were determined as the low and high thresholds. |
| I32 acPMCPConnectionLifetimeTimeBelowLowThreshold | 1.3.6.1.4.1.5003.10.8.2.31.1.1.7 | Integer32 | read-only | Percent of interval time for which gauge is below what was determined as the low threshold. |
| I32 acPMCPConnectionLifetimeTimeBetweenThresholds | 1.3.6.1.4.1.5003.10.8.2.31.1.1.8 | Integer32 | read-only | Percent of interval time for which gauge is above what was determined as the high threshold. |
| I32 acPMCPConnectionLifetimeTotal | 1.3.6.1.4.1.5003.10.8.2.31.1.1.11 | Integer32 | read-only | Total since last reset. |
| G32 acPMCPConnectionLifetimeVal | 1.3.6.1.4.1.5003.10.8.2.31.1.1.2 | Gauge32 | read-only | Value of gauge or counter. |
| C32 acPMCPConnectionLifetimeVolume | 1.3.6.1.4.1.5003.10.8.2.31.1.1.6 | Counter32 | read-only | Activity volume. |
| I32 acPMCPConnectionStateActiveTime | 1.3.6.1.4.1.5003.10.8.2.31.2.1.3 | Integer32 | read-only | Percent of interval time for which gauge is between what were determined as the low and high thresholds. |
| G32 acPMCPConnectionStateChanges | 1.3.6.1.4.1.5003.10.8.2.31.2.1.2 | Gauge32 | read-only | Activity volume. |
| acPMCPConnectionStateEntry | 1.3.6.1.4.1.5003.10.8.2.31.2.1 | not-accessible | ||
| U32 acPMCPConnectionStateInterval | 1.3.6.1.4.1.5003.10.8.2.31.2.1.1 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| acPMCPConnectionStateTable | 1.3.6.1.4.1.5003.10.8.2.31.2 | not-accessible | MGC connection activity indicator. | |
| INT acPMCPRetransmissionCountDirection | 1.3.6.1.4.1.5003.10.8.2.31.4.1.1 | INTEGER | not-accessible | Direction index. 0 - transmit 1 - receive. |
| acPMCPRetransmissionCountEntry | 1.3.6.1.4.1.5003.10.8.2.31.4.1 | not-accessible | ||
| U32 acPMCPRetransmissionCountInterval | 1.3.6.1.4.1.5003.10.8.2.31.4.1.2 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| acPMCPRetransmissionCountTable | 1.3.6.1.4.1.5003.10.8.2.31.4 | not-accessible | Number of transaction retransmissions. The first direction (tx(0)) counts the transactions sent from the board, while the second direction (rx(1)) counts the incoming retransmissions. | |
| I32 acPMCPRetransmissionCountTotal | 1.3.6.1.4.1.5003.10.8.2.31.4.1.4 | Integer32 | read-only | Total since last reset. |
| G32 acPMCPRetransmissionCountVal | 1.3.6.1.4.1.5003.10.8.2.31.4.1.3 | Gauge32 | read-only | Value of gauge or counter. |
| I32 acPMcpTransactionProcessTimerAverage | 1.3.6.1.4.1.5003.10.8.2.31.9.1.3 | Integer32 | read-only | Average value with in the period time. |
| acPMcpTransactionProcessTimerEntry | 1.3.6.1.4.1.5003.10.8.2.31.9.1 | not-accessible | ||
| I32 acPMcpTransactionProcessTimerFullDayAverage | 1.3.6.1.4.1.5003.10.8.2.31.9.1.10 | Integer32 | read-only | The average of full 24 hours. |
| U32 acPMcpTransactionProcessTimerInterval | 1.3.6.1.4.1.5003.10.8.2.31.9.1.1 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| I32 acPMcpTransactionProcessTimerMax | 1.3.6.1.4.1.5003.10.8.2.31.9.1.4 | Integer32 | read-only | Maximum value with in the period time. |
| I32 acPMcpTransactionProcessTimerMin | 1.3.6.1.4.1.5003.10.8.2.31.9.1.5 | Integer32 | read-only | Minimum value with in the period time. |
| acPMcpTransactionProcessTimerTable | 1.3.6.1.4.1.5003.10.8.2.31.9 | not-accessible | Processing time (in Microseconds), For transaction request. | |
| I32 acPMcpTransactionProcessTimerTimeAboveHighThreshold | 1.3.6.1.4.1.5003.10.8.2.31.9.1.9 | Integer32 | read-only | Percent of interval time for which gauge is between what were determined as the low and high thresholds. |
| I32 acPMcpTransactionProcessTimerTimeBelowLowThreshold | 1.3.6.1.4.1.5003.10.8.2.31.9.1.7 | Integer32 | read-only | Percent of interval time for which gauge is below what was determined as the low threshold. |
| I32 acPMcpTransactionProcessTimerTimeBetweenThresholds | 1.3.6.1.4.1.5003.10.8.2.31.9.1.8 | Integer32 | read-only | Percent of interval time for which gauge is above what was determined as the high threshold. |
| I32 acPMcpTransactionProcessTimerTotal | 1.3.6.1.4.1.5003.10.8.2.31.9.1.11 | Integer32 | read-only | Total since last reset. |
| G32 acPMcpTransactionProcessTimerVal | 1.3.6.1.4.1.5003.10.8.2.31.9.1.2 | Gauge32 | read-only | Value of gauge or counter. |
| C32 acPMcpTransactionProcessTimerVolume | 1.3.6.1.4.1.5003.10.8.2.31.9.1.6 | Counter32 | read-only | Activity volume. |
| acPMcpUMTSHandOverCountEntry | 1.3.6.1.4.1.5003.10.8.2.41.4.1 | not-accessible | ||
| U32 acPMcpUMTSHandOverCountInterval | 1.3.6.1.4.1.5003.10.8.2.41.4.1.1 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| acPMcpUMTSHandOverCountTable | 1.3.6.1.4.1.5003.10.8.2.41.4 | not-accessible | Number of active channels per trunk (index: trunk number). | |
| G32 acPMcpUMTSHandOverCountVal | 1.3.6.1.4.1.5003.10.8.2.41.4.1.2 | Gauge32 | read-only | Value of gauge or counter. |
| acPMMegaco | 1.3.6.1.4.1.5003.10.8.2.41 | |||
| acPMMegacoAddFailureCountEntry | 1.3.6.1.4.1.5003.10.8.2.41.5.1 | not-accessible | ||
| U32 acPMMegacoAddFailureCountInterval | 1.3.6.1.4.1.5003.10.8.2.41.5.1.1 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| acPMMegacoAddFailureCountTable | 1.3.6.1.4.1.5003.10.8.2.41.5 | not-accessible | Number of Megaco failures for Add | |
| G32 acPMMegacoAddFailureCountVal | 1.3.6.1.4.1.5003.10.8.2.41.5.1.2 | Gauge32 | read-only | Value of gauge or counter. |
| acPMMegacoAttributes | 1.3.6.1.4.1.5003.10.8.1.33 | |||
| U32 acPMMegacoAttributesCmdFailureCountHighThreshold | 1.3.6.1.4.1.5003.10.8.1.33.5 | Unsigned32 | read-write | High threshold. Access: Instant. |
| U32 acPMMegacoAttributesCmdFailureCountLowThreshold | 1.3.6.1.4.1.5003.10.8.1.33.6 | Unsigned32 | read-write | Low threshold. Access: Instant. |
| U32 acPMMegacoAttributesCmdSuccessCountHighThreshold | 1.3.6.1.4.1.5003.10.8.1.33.3 | Unsigned32 | read-write | High threshold. Access: Instant. |
| U32 acPMMegacoAttributesCmdSuccessCountLowThreshold | 1.3.6.1.4.1.5003.10.8.1.33.4 | Unsigned32 | read-write | Low threshold. Access: Instant. |
| U32 acPMMegacoAttributesServiceChangeCountHighThreshold | 1.3.6.1.4.1.5003.10.8.1.33.1 | Unsigned32 | read-write | High threshold. Access: Instant. |
| U32 acPMMegacoAttributesServiceChangeCountLowThreshold | 1.3.6.1.4.1.5003.10.8.1.33.2 | Unsigned32 | read-write | Low threshold. Access: Instant. |
| acPMMegacoFailedAddWithLoopbackEntry | 1.3.6.1.4.1.5003.10.8.2.41.8.1 | not-accessible | ||
| U32 acPMMegacoFailedAddWithLoopbackInterval | 1.3.6.1.4.1.5003.10.8.2.41.8.1.1 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| acPMMegacoFailedAddWithLoopbackTable | 1.3.6.1.4.1.5003.10.8.2.41.8 | not-accessible | Number of failed Megaco Add commands with loopback. | |
| G32 acPMMegacoFailedAddWithLoopbackVal | 1.3.6.1.4.1.5003.10.8.2.41.8.1.2 | Gauge32 | read-only | Value of gauge or counter. |
| acPMMegacoModifyFailureCountEntry | 1.3.6.1.4.1.5003.10.8.2.41.6.1 | not-accessible | ||
| U32 acPMMegacoModifyFailureCountInterval | 1.3.6.1.4.1.5003.10.8.2.41.6.1.1 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| acPMMegacoModifyFailureCountTable | 1.3.6.1.4.1.5003.10.8.2.41.6 | not-accessible | Number of Megaco failures for Modify | |
| G32 acPMMegacoModifyFailureCountVal | 1.3.6.1.4.1.5003.10.8.2.41.6.1.2 | Gauge32 | read-only | Value of gauge or counter. |
| acPMMegacoOutgoingCommandFailureCountEntry | 1.3.6.1.4.1.5003.10.8.2.41.10.1 | not-accessible | ||
| U32 acPMMegacoOutgoingCommandFailureCountInterval | 1.3.6.1.4.1.5003.10.8.2.41.10.1.1 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| acPMMegacoOutgoingCommandFailureCountTable | 1.3.6.1.4.1.5003.10.8.2.41.10 | not-accessible | Number of failed Megaco outgoing commands . | |
| G32 acPMMegacoOutgoingCommandFailureCountVal | 1.3.6.1.4.1.5003.10.8.2.41.10.1.2 | Gauge32 | read-only | Value of gauge or counter. |
| acPMMegacoOutgoingCommandSuccessCountEntry | 1.3.6.1.4.1.5003.10.8.2.41.9.1 | not-accessible | ||
| U32 acPMMegacoOutgoingCommandSuccessCountInterval | 1.3.6.1.4.1.5003.10.8.2.41.9.1.1 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| acPMMegacoOutgoingCommandSuccessCountTable | 1.3.6.1.4.1.5003.10.8.2.41.9 | not-accessible | Number of successful Megaco outgoing commands. | |
| G32 acPMMegacoOutgoingCommandSuccessCountVal | 1.3.6.1.4.1.5003.10.8.2.41.9.1.2 | Gauge32 | read-only | Value of gauge or counter. |
| acPMMegacoServiceChangeCountEntry | 1.3.6.1.4.1.5003.10.8.2.41.1.1 | not-accessible | ||
| U32 acPMMegacoServiceChangeCountInterval | 1.3.6.1.4.1.5003.10.8.2.41.1.1.2 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| INT acPMMegacoServiceChangeCountMethod | 1.3.6.1.4.1.5003.10.8.2.41.1.1.1 | INTEGER | not-accessible | Method: 0=FailOver, 1=Forced, 2=Graceful, 3=Restart, 4=Disconnected, 5=Handoff. |
| acPMMegacoServiceChangeCountTable | 1.3.6.1.4.1.5003.10.8.2.41.1 | not-accessible | Number of service changes, per method. Index: 0=FailOver, 1=Forced, 2=Graceful, 3=Restart, 4=Disconnected, 5=Handoff | |
| G32 acPMMegacoServiceChangeCountVal | 1.3.6.1.4.1.5003.10.8.2.41.1.1.3 | Gauge32 | read-only | Value of gauge or counter. |
| acPMMegacoSuccessfulAddWithLoopbackEntry | 1.3.6.1.4.1.5003.10.8.2.41.7.1 | not-accessible | ||
| U32 acPMMegacoSuccessfulAddWithLoopbackInterval | 1.3.6.1.4.1.5003.10.8.2.41.7.1.1 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| acPMMegacoSuccessfulAddWithLoopbackTable | 1.3.6.1.4.1.5003.10.8.2.41.7 | not-accessible | Number of successful Megaco Add commands with loopback. | |
| G32 acPMMegacoSuccessfulAddWithLoopbackVal | 1.3.6.1.4.1.5003.10.8.2.41.7.1.2 | Gauge32 | read-only | Value of gauge or counter. |
| acPMMGCP | 1.3.6.1.4.1.5003.10.8.2.51 | |||
| INT acPMMGCPCommandFailureCountCommandType | 1.3.6.1.4.1.5003.10.8.2.51.4.1.1 | INTEGER | not-accessible | Command type:EPCF (0),CRCX (1),MDCX (2),DLCX (3),RQNT (4),NTFY (5),AUEP(6),AUCX (7),RSIP(8). |
| acPMMGCPCommandFailureCountEntry | 1.3.6.1.4.1.5003.10.8.2.51.4.1 | not-accessible | ||
| U32 acPMMGCPCommandFailureCountInterval | 1.3.6.1.4.1.5003.10.8.2.51.4.1.2 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| acPMMGCPCommandFailureCountTable | 1.3.6.1.4.1.5003.10.8.2.51.4 | not-accessible | Number of failing commands, per command type. Index: EPCF (0),CRCX (1),MDCX (2),DLCX (3),RQNT (4),NTFY (5),AUEP(6),AUCX (7),RSIP(8). | |
| I32 acPMMGCPCommandFailureCountTotal | 1.3.6.1.4.1.5003.10.8.2.51.4.1.4 | Integer32 | read-only | Total since last reset. |
| G32 acPMMGCPCommandFailureCountVal | 1.3.6.1.4.1.5003.10.8.2.51.4.1.3 | Gauge32 | read-only | Value of gauge or counter. |
| INT acPMMGCPCommandSuccessCountCommandType | 1.3.6.1.4.1.5003.10.8.2.51.3.1.1 | INTEGER | not-accessible | Command type:EPCF (0),CRCX (1),MDCX (2),DLCX (3),RQNT (4),NTFY (5),AUEP(6),AUCX (7),RSIP(8). |
| acPMMGCPCommandSuccessCountEntry | 1.3.6.1.4.1.5003.10.8.2.51.3.1 | not-accessible | ||
| U32 acPMMGCPCommandSuccessCountInterval | 1.3.6.1.4.1.5003.10.8.2.51.3.1.2 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| acPMMGCPCommandSuccessCountTable | 1.3.6.1.4.1.5003.10.8.2.51.3 | not-accessible | Number of successful commands, per command type. Index: EPCF (0),CRCX (1),MDCX (2),DLCX (3),RQNT (4),NTFY (5),AUEP(6),AUCX (7),RSIP(8). | |
| I32 acPMMGCPCommandSuccessCountTotal | 1.3.6.1.4.1.5003.10.8.2.51.3.1.4 | Integer32 | read-only | Total since last reset. |
| G32 acPMMGCPCommandSuccessCountVal | 1.3.6.1.4.1.5003.10.8.2.51.3.1.3 | Gauge32 | read-only | Value of gauge or counter. |
| acPMMGCPFailedCRCXResponsesEntry | 1.3.6.1.4.1.5003.10.8.2.51.10.1 | not-accessible | ||
| U32 acPMMGCPFailedCRCXResponsesInterval | 1.3.6.1.4.1.5003.10.8.2.51.10.1.2 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| INT acPMMGCPFailedCRCXResponsesReasonCode | 1.3.6.1.4.1.5003.10.8.2.51.10.1.1 | INTEGER | not-accessible | Reason code Index. The Numbers at the values are as in the RFC. |
| acPMMGCPFailedCRCXResponsesTable | 1.3.6.1.4.1.5003.10.8.2.51.10 | not-accessible | Number of failed responses to CRCX commands, per reason code. | |
| C32 acPMMGCPFailedCRCXResponsesVal | 1.3.6.1.4.1.5003.10.8.2.51.10.1.3 | Counter32 | read-only | Value of gauge or counter. |
| acPMMGCPFailedLoopbackCRCXEntry | 1.3.6.1.4.1.5003.10.8.2.51.6.1 | not-accessible | ||
| U32 acPMMGCPFailedLoopbackCRCXInterval | 1.3.6.1.4.1.5003.10.8.2.51.6.1.1 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| acPMMGCPFailedLoopbackCRCXTable | 1.3.6.1.4.1.5003.10.8.2.51.6 | not-accessible | ||
| C32 acPMMGCPFailedLoopbackCRCXVal | 1.3.6.1.4.1.5003.10.8.2.51.6.1.2 | Counter32 | read-only | Value of gauge or counter. |
| acPMMGCPFailedMDCXResponsesEntry | 1.3.6.1.4.1.5003.10.8.2.51.11.1 | not-accessible | ||
| U32 acPMMGCPFailedMDCXResponsesInterval | 1.3.6.1.4.1.5003.10.8.2.51.11.1.2 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| INT acPMMGCPFailedMDCXResponsesReasonCode | 1.3.6.1.4.1.5003.10.8.2.51.11.1.1 | INTEGER | not-accessible | Reason code Index. The Numbers at the values are as in the RFC. |
| acPMMGCPFailedMDCXResponsesTable | 1.3.6.1.4.1.5003.10.8.2.51.11 | not-accessible | Number of failed responses to CRCX commands, per reason code. | |
| C32 acPMMGCPFailedMDCXResponsesVal | 1.3.6.1.4.1.5003.10.8.2.51.11.1.3 | Counter32 | read-only | Value of gauge or counter. |
| acPMMGCPFailedNTFYResponsesEntry | 1.3.6.1.4.1.5003.10.8.2.51.8.1 | not-accessible | ||
| U32 acPMMGCPFailedNTFYResponsesInterval | 1.3.6.1.4.1.5003.10.8.2.51.8.1.1 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| acPMMGCPFailedNTFYResponsesTable | 1.3.6.1.4.1.5003.10.8.2.51.8 | not-accessible | ||
| C32 acPMMGCPFailedNTFYResponsesVal | 1.3.6.1.4.1.5003.10.8.2.51.8.1.2 | Counter32 | read-only | Value of gauge or counter. |
| acPMMGCPFailedRSIPResponsesEntry | 1.3.6.1.4.1.5003.10.8.2.51.9.1 | not-accessible | ||
| U32 acPMMGCPFailedRSIPResponsesInterval | 1.3.6.1.4.1.5003.10.8.2.51.9.1.1 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| acPMMGCPFailedRSIPResponsesTable | 1.3.6.1.4.1.5003.10.8.2.51.9 | not-accessible | ||
| C32 acPMMGCPFailedRSIPResponsesVal | 1.3.6.1.4.1.5003.10.8.2.51.9.1.2 | Counter32 | read-only | Value of gauge or counter. |
| acPMMGCPGeneratedDLCXEntry | 1.3.6.1.4.1.5003.10.8.2.51.2.1 | not-accessible | ||
| U32 acPMMGCPGeneratedDLCXInterval | 1.3.6.1.4.1.5003.10.8.2.51.2.1.1 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| acPMMGCPGeneratedDLCXPerReasonCodeEntry | 1.3.6.1.4.1.5003.10.8.2.51.12.1 | not-accessible | ||
| U32 acPMMGCPGeneratedDLCXPerReasonCodeInterval | 1.3.6.1.4.1.5003.10.8.2.51.12.1.2 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| INT acPMMGCPGeneratedDLCXPerReasonCodeReasonCode | 1.3.6.1.4.1.5003.10.8.2.51.12.1.1 | INTEGER | not-accessible | Reason code Index. The Numbers at the values are as in the RFC. |
| acPMMGCPGeneratedDLCXPerReasonCodeTable | 1.3.6.1.4.1.5003.10.8.2.51.12 | not-accessible | Number of gateway-generated DLCX commands per reason code. when you choose 0 its 900(ENDPOINT_MALFUNCTIONING) and so on. | |
| C32 acPMMGCPGeneratedDLCXPerReasonCodeVal | 1.3.6.1.4.1.5003.10.8.2.51.12.1.3 | Counter32 | read-only | Value of gauge or counter. |
| acPMMGCPGeneratedDLCXTable | 1.3.6.1.4.1.5003.10.8.2.51.2 | not-accessible | This parameter counts the number of gateway-generated DLCX commands (as opposed to DLCX commands received from the call-agent). | |
| C32 acPMMGCPGeneratedDLCXVal | 1.3.6.1.4.1.5003.10.8.2.51.2.1.2 | Counter32 | read-only | Value of gauge or counter. |
| acPMMGCPGeneratedNTFYEntry | 1.3.6.1.4.1.5003.10.8.2.51.7.1 | not-accessible | ||
| U32 acPMMGCPGeneratedNTFYInterval | 1.3.6.1.4.1.5003.10.8.2.51.7.1.1 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| acPMMGCPGeneratedNTFYTable | 1.3.6.1.4.1.5003.10.8.2.51.7 | not-accessible | ||
| C32 acPMMGCPGeneratedNTFYVal | 1.3.6.1.4.1.5003.10.8.2.51.7.1.2 | Counter32 | read-only | Value of gauge or counter. |
| acPMMGCPLoopbackCRCXEntry | 1.3.6.1.4.1.5003.10.8.2.51.5.1 | not-accessible | ||
| U32 acPMMGCPLoopbackCRCXInterval | 1.3.6.1.4.1.5003.10.8.2.51.5.1.1 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| acPMMGCPLoopbackCRCXTable | 1.3.6.1.4.1.5003.10.8.2.51.5 | not-accessible | ||
| C32 acPMMGCPLoopbackCRCXVal | 1.3.6.1.4.1.5003.10.8.2.51.5.1.2 | Counter32 | read-only | Value of gauge or counter. |
| acPMMGCPRsipReasonCountEntry | 1.3.6.1.4.1.5003.10.8.2.51.1.1 | not-accessible | ||
| U32 acPMMGCPRsipReasonCountInterval | 1.3.6.1.4.1.5003.10.8.2.51.1.1.2 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| INT acPMMGCPRsipReasonCountReasonCode | 1.3.6.1.4.1.5003.10.8.2.51.1.1.1 | INTEGER | not-accessible | Reason code. Index: 0=Restart, 1=Forced, 2=Disconnected, 3=KeepAlive, 4=Graceful, 5=CancelGraceful, 6=ResetBoard, 7=NonVoice. |
| acPMMGCPRsipReasonCountTable | 1.3.6.1.4.1.5003.10.8.2.51.1 | not-accessible | Number of RSIPs, per reason code. | |
| C32 acPMMGCPRsipReasonCountVal | 1.3.6.1.4.1.5003.10.8.2.51.1.1.3 | Counter32 | read-only | Value of gauge or counter. |
| acPMSIP | 1.3.6.1.4.1.5003.10.8.2.52 | |||
| INT acPMSIPAttemptedCallsDirection | 1.3.6.1.4.1.5003.10.8.2.52.1.1.1 | INTEGER | not-accessible | Direction index - TEL2IP(0), IP2TEL(1). |
| acPMSIPAttemptedCallsEntry | 1.3.6.1.4.1.5003.10.8.2.52.1.1 | not-accessible | ||
| U32 acPMSIPAttemptedCallsInterval | 1.3.6.1.4.1.5003.10.8.2.52.1.1.2 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| acPMSIPAttemptedCallsTable | 1.3.6.1.4.1.5003.10.8.2.52.1 | not-accessible | Number of attempted calls (Index 0 for TEL2IP and Index 1 for IP2TEL) | |
| C32 acPMSIPAttemptedCallsVal | 1.3.6.1.4.1.5003.10.8.2.52.1.1.3 | Counter32 | read-only | Value of gauge or counter. |
| acPMSipAttributes | 1.3.6.1.4.1.5003.10.8.1.34 | |||
| U32 acPMSipAttributesCallDurationHighThreshold | 1.3.6.1.4.1.5003.10.8.1.34.1 | Unsigned32 | read-write | Low threshold. Access: Instant. |
| U32 acPMSipAttributesCallDurationLowThreshold | 1.3.6.1.4.1.5003.10.8.1.34.2 | Unsigned32 | read-write | Low threshold. Access: Instant. |
| INT acPMSIPBusyCallsDirection | 1.3.6.1.4.1.5003.10.8.2.52.4.1.1 | INTEGER | not-accessible | Direction index - TEL2IP(0), IP2TEL(1). |
| acPMSIPBusyCallsEntry | 1.3.6.1.4.1.5003.10.8.2.52.4.1 | not-accessible | ||
| U32 acPMSIPBusyCallsInterval | 1.3.6.1.4.1.5003.10.8.2.52.4.1.2 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| acPMSIPBusyCallsTable | 1.3.6.1.4.1.5003.10.8.2.52.4 | not-accessible | Number of busy calls (Index 0 for TEL2IP and Index 1 for IP2TEL) | |
| C32 acPMSIPBusyCallsVal | 1.3.6.1.4.1.5003.10.8.2.52.4.1.3 | Counter32 | read-only | Value of gauge or counter. |
| I32 acPMSIPCallDurationAverage | 1.3.6.1.4.1.5003.10.8.2.52.2.1.4 | Integer32 | read-only | Average value with in the period time. |
| INT acPMSIPCallDurationDirection | 1.3.6.1.4.1.5003.10.8.2.52.2.1.1 | INTEGER | not-accessible | Direction index - TEL2IP(0), IP2TEL(1). |
| acPMSIPCallDurationEntry | 1.3.6.1.4.1.5003.10.8.2.52.2.1 | not-accessible | ||
| I32 acPMSIPCallDurationFullDayAverage | 1.3.6.1.4.1.5003.10.8.2.52.2.1.11 | Integer32 | read-only | The average of full 24 hours. |
| U32 acPMSIPCallDurationInterval | 1.3.6.1.4.1.5003.10.8.2.52.2.1.2 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| I32 acPMSIPCallDurationMax | 1.3.6.1.4.1.5003.10.8.2.52.2.1.5 | Integer32 | read-only | Maximum value with in the period time. |
| I32 acPMSIPCallDurationMin | 1.3.6.1.4.1.5003.10.8.2.52.2.1.6 | Integer32 | read-only | Minimum value with in the period time. |
| acPMSIPCallDurationTable | 1.3.6.1.4.1.5003.10.8.2.52.2 | not-accessible | Call Duration (Index 0 for Tel2IP and Index 1 for IP2Tel);The Total preprty gives the sum of all calls duration, while the Value property is for the last call only | |
| I32 acPMSIPCallDurationTimeAboveHighThreshold | 1.3.6.1.4.1.5003.10.8.2.52.2.1.10 | Integer32 | read-only | Percent of interval time for which gauge is between what were determined as the low and high thresholds. |
| I32 acPMSIPCallDurationTimeBelowLowThreshold | 1.3.6.1.4.1.5003.10.8.2.52.2.1.8 | Integer32 | read-only | Percent of interval time for which gauge is below what was determined as the low threshold. |
| I32 acPMSIPCallDurationTimeBetweenThresholds | 1.3.6.1.4.1.5003.10.8.2.52.2.1.9 | Integer32 | read-only | Percent of interval time for which gauge is above what was determined as the high threshold. |
| I32 acPMSIPCallDurationTotal | 1.3.6.1.4.1.5003.10.8.2.52.2.1.12 | Integer32 | read-only | Total since last reset. |
| G32 acPMSIPCallDurationVal | 1.3.6.1.4.1.5003.10.8.2.52.2.1.3 | Gauge32 | read-only | Value of gauge or counter. |
| C32 acPMSIPCallDurationVolume | 1.3.6.1.4.1.5003.10.8.2.52.2.1.7 | Counter32 | read-only | Activity volume. |
| INT acPMSIPEstablishedCallsDirection | 1.3.6.1.4.1.5003.10.8.2.52.8.1.1 | INTEGER | not-accessible | Direction index - TEL2IP(0), IP2TEL(1). |
| acPMSIPEstablishedCallsEntry | 1.3.6.1.4.1.5003.10.8.2.52.8.1 | not-accessible | ||
| U32 acPMSIPEstablishedCallsInterval | 1.3.6.1.4.1.5003.10.8.2.52.8.1.2 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| acPMSIPEstablishedCallsTable | 1.3.6.1.4.1.5003.10.8.2.52.8 | not-accessible | Number of established calls (Index 0 for TEL2IP and Index 1 for IP2TEL) | |
| C32 acPMSIPEstablishedCallsVal | 1.3.6.1.4.1.5003.10.8.2.52.8.1.3 | Counter32 | read-only | Value of gauge or counter. |
| INT acPMSIPFailCallsDirection | 1.3.6.1.4.1.5003.10.8.2.52.7.1.1 | INTEGER | not-accessible | Direction index - TEL2IP(0), IP2TEL(1). |
| acPMSIPFailCallsEntry | 1.3.6.1.4.1.5003.10.8.2.52.7.1 | not-accessible | ||
| U32 acPMSIPFailCallsInterval | 1.3.6.1.4.1.5003.10.8.2.52.7.1.2 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| acPMSIPFailCallsTable | 1.3.6.1.4.1.5003.10.8.2.52.7 | not-accessible | Number of calls that failed because of other reasons (Index 0 for TEL2IP and Index 1 for IP2TEL) | |
| C32 acPMSIPFailCallsVal | 1.3.6.1.4.1.5003.10.8.2.52.7.1.3 | Counter32 | read-only | Value of gauge or counter. |
| INT acPMSIPFaxAttemptedCallsDirection | 1.3.6.1.4.1.5003.10.8.2.52.9.1.1 | INTEGER | not-accessible | Direction index - TEL2IP(0), IP2TEL(1). |
| acPMSIPFaxAttemptedCallsEntry | 1.3.6.1.4.1.5003.10.8.2.52.9.1 | not-accessible | ||
| U32 acPMSIPFaxAttemptedCallsInterval | 1.3.6.1.4.1.5003.10.8.2.52.9.1.2 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| acPMSIPFaxAttemptedCallsTable | 1.3.6.1.4.1.5003.10.8.2.52.9 | not-accessible | Number of attempted fax calls (Index 0 for TEL2IP and Index 1 for IP2TEL) | |
| C32 acPMSIPFaxAttemptedCallsVal | 1.3.6.1.4.1.5003.10.8.2.52.9.1.3 | Counter32 | read-only | Value of gauge or counter. |
| INT acPMSIPFaxSuccessCallsDirection | 1.3.6.1.4.1.5003.10.8.2.52.10.1.1 | INTEGER | not-accessible | Direction index - TEL2IP(0), IP2TEL(1). |
| acPMSIPFaxSuccessCallsEntry | 1.3.6.1.4.1.5003.10.8.2.52.10.1 | not-accessible | ||
| U32 acPMSIPFaxSuccessCallsInterval | 1.3.6.1.4.1.5003.10.8.2.52.10.1.2 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| acPMSIPFaxSuccessCallsTable | 1.3.6.1.4.1.5003.10.8.2.52.10 | not-accessible | Number of success fax calls (Index 0 for TEL2IP and Index 1 for IP2TEL) | |
| C32 acPMSIPFaxSuccessCallsVal | 1.3.6.1.4.1.5003.10.8.2.52.10.1.3 | Counter32 | read-only | Value of gauge or counter. |
| INT acPMSIPForwardedCallsDirection | 1.3.6.1.4.1.5003.10.8.2.52.11.1.1 | INTEGER | not-accessible | Direction index - TEL2IP(0), IP2TEL(1). |
| acPMSIPForwardedCallsEntry | 1.3.6.1.4.1.5003.10.8.2.52.11.1 | not-accessible | ||
| U32 acPMSIPForwardedCallsInterval | 1.3.6.1.4.1.5003.10.8.2.52.11.1.2 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| acPMSIPForwardedCallsTable | 1.3.6.1.4.1.5003.10.8.2.52.11 | not-accessible | Number of calls released due to forwarding (Index 0 for TEL2IP and Index 1 for IP2TEL) | |
| C32 acPMSIPForwardedCallsVal | 1.3.6.1.4.1.5003.10.8.2.52.11.1.3 | Counter32 | read-only | Value of gauge or counter. |
| acPMSIPIP2TelTrunkEstablishedCallsEntry | 1.3.6.1.4.1.5003.10.8.2.52.14.1 | not-accessible | ||
| U32 acPMSIPIP2TelTrunkEstablishedCallsInterval | 1.3.6.1.4.1.5003.10.8.2.52.14.1.2 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| acPMSIPIP2TelTrunkEstablishedCallsTable | 1.3.6.1.4.1.5003.10.8.2.52.14 | not-accessible | Number of IP2Tel established calls per trunk. | |
| U32 acPMSIPIP2TelTrunkEstablishedCallsTrunkNum | 1.3.6.1.4.1.5003.10.8.2.52.14.1.1 | Unsigned32 | not-accessible | Trunk number. 0 is the first trunk. |
| C32 acPMSIPIP2TelTrunkEstablishedCallsVal | 1.3.6.1.4.1.5003.10.8.2.52.14.1.3 | Counter32 | read-only | Value of gauge or counter. |
| acPMSIPIP2TelTrunkGroupEstablishedCallsEntry | 1.3.6.1.4.1.5003.10.8.2.52.16.1 | not-accessible | ||
| U32 acPMSIPIP2TelTrunkGroupEstablishedCallsGroupNum | 1.3.6.1.4.1.5003.10.8.2.52.16.1.1 | Unsigned32 | not-accessible | Trunk Group number. 0 is the first trunk group. |
| U32 acPMSIPIP2TelTrunkGroupEstablishedCallsInterval | 1.3.6.1.4.1.5003.10.8.2.52.16.1.2 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| acPMSIPIP2TelTrunkGroupEstablishedCallsTable | 1.3.6.1.4.1.5003.10.8.2.52.16 | not-accessible | Number of IP2Tel established calls per trunk group. | |
| C32 acPMSIPIP2TelTrunkGroupEstablishedCallsVal | 1.3.6.1.4.1.5003.10.8.2.52.16.1.3 | Counter32 | read-only | Value of gauge or counter. |
| INT acPMSIPNoAnswerCallsDirection | 1.3.6.1.4.1.5003.10.8.2.52.5.1.1 | INTEGER | not-accessible | Direction index - TEL2IP(0), IP2TEL(1). |
| acPMSIPNoAnswerCallsEntry | 1.3.6.1.4.1.5003.10.8.2.52.5.1 | not-accessible | ||
| U32 acPMSIPNoAnswerCallsInterval | 1.3.6.1.4.1.5003.10.8.2.52.5.1.2 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| acPMSIPNoAnswerCallsTable | 1.3.6.1.4.1.5003.10.8.2.52.5 | not-accessible | Number of no answer calls (Index 0 for TEL2IP and Index 1 for IP2TEL) | |
| C32 acPMSIPNoAnswerCallsVal | 1.3.6.1.4.1.5003.10.8.2.52.5.1.3 | Counter32 | read-only | Value of gauge or counter. |
| INT acPMSIPNoMatchCallsDirection | 1.3.6.1.4.1.5003.10.8.2.52.3.1.1 | INTEGER | not-accessible | Direction index - TEL2IP(0), IP2TEL(1). |
| acPMSIPNoMatchCallsEntry | 1.3.6.1.4.1.5003.10.8.2.52.3.1 | not-accessible | ||
| U32 acPMSIPNoMatchCallsInterval | 1.3.6.1.4.1.5003.10.8.2.52.3.1.2 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| acPMSIPNoMatchCallsTable | 1.3.6.1.4.1.5003.10.8.2.52.3 | not-accessible | Number of no match calls (Index 0 for TEL2IP and Index 1 for IP2TEL) | |
| C32 acPMSIPNoMatchCallsVal | 1.3.6.1.4.1.5003.10.8.2.52.3.1.3 | Counter32 | read-only | Value of gauge or counter. |
| INT acPMSIPNoResourcesCallsDirection | 1.3.6.1.4.1.5003.10.8.2.52.12.1.1 | INTEGER | not-accessible | Direction index - TEL2IP(0), IP2TEL(1). |
| acPMSIPNoResourcesCallsEntry | 1.3.6.1.4.1.5003.10.8.2.52.12.1 | not-accessible | ||
| U32 acPMSIPNoResourcesCallsInterval | 1.3.6.1.4.1.5003.10.8.2.52.12.1.2 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| acPMSIPNoResourcesCallsTable | 1.3.6.1.4.1.5003.10.8.2.52.12 | not-accessible | Number of calls released because of no resources (Index 0 for TEL2IP and Index 1 for IP2TEL) | |
| C32 acPMSIPNoResourcesCallsVal | 1.3.6.1.4.1.5003.10.8.2.52.12.1.3 | Counter32 | read-only | Value of gauge or counter. |
| INT acPMSIPNoRouteCallsDirection | 1.3.6.1.4.1.5003.10.8.2.52.6.1.1 | INTEGER | not-accessible | Direction index - TEL2IP(0), IP2TEL(1). |
| acPMSIPNoRouteCallsEntry | 1.3.6.1.4.1.5003.10.8.2.52.6.1 | not-accessible | ||
| U32 acPMSIPNoRouteCallsInterval | 1.3.6.1.4.1.5003.10.8.2.52.6.1.2 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| acPMSIPNoRouteCallsTable | 1.3.6.1.4.1.5003.10.8.2.52.6 | not-accessible | Number of no route calls (Index 0 for TEL2IP and Index 1 for IP2TEL) | |
| C32 acPMSIPNoRouteCallsVal | 1.3.6.1.4.1.5003.10.8.2.52.6.1.3 | Counter32 | read-only | Value of gauge or counter. |
| acPMSIPTel2IPTrunkEstablishedCallsEntry | 1.3.6.1.4.1.5003.10.8.2.52.13.1 | not-accessible | ||
| U32 acPMSIPTel2IPTrunkEstablishedCallsInterval | 1.3.6.1.4.1.5003.10.8.2.52.13.1.2 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| acPMSIPTel2IPTrunkEstablishedCallsTable | 1.3.6.1.4.1.5003.10.8.2.52.13 | not-accessible | Number of Tel2IP established calls per trunk. | |
| U32 acPMSIPTel2IPTrunkEstablishedCallsTrunkNum | 1.3.6.1.4.1.5003.10.8.2.52.13.1.1 | Unsigned32 | not-accessible | Trunk number. 0 is the first trunk. |
| C32 acPMSIPTel2IPTrunkEstablishedCallsVal | 1.3.6.1.4.1.5003.10.8.2.52.13.1.3 | Counter32 | read-only | Value of gauge or counter. |
| acPMSIPTel2IPTrunkGroupEstablishedCallsEntry | 1.3.6.1.4.1.5003.10.8.2.52.15.1 | not-accessible | ||
| U32 acPMSIPTel2IPTrunkGroupEstablishedCallsGroupNum | 1.3.6.1.4.1.5003.10.8.2.52.15.1.1 | Unsigned32 | not-accessible | Trunk Group number. 0 is the first trunk group. |
| U32 acPMSIPTel2IPTrunkGroupEstablishedCallsInterval | 1.3.6.1.4.1.5003.10.8.2.52.15.1.2 | Unsigned32 | not-accessible | Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last. |
| acPMSIPTel2IPTrunkGroupEstablishedCallsTable | 1.3.6.1.4.1.5003.10.8.2.52.15 | not-accessible | Number of Tel2IP established calls per trunk group. | |
| C32 acPMSIPTel2IPTrunkGroupEstablishedCallsVal | 1.3.6.1.4.1.5003.10.8.2.52.15.1.3 | Counter32 | read-only | Value of gauge or counter. |
RFC description
Provides performance monitoring and control for Audiocodes devices, with configurable monitoring intervals and thresholds.
Start monitoring AudioCodes Mediant-series gateways/SBCs with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.