| OID symbolic | OID numeric | Type | Access | Description |
|---|
| a3Com | 1.3.6.1.4.1.43 | | | |
| switchingSystemsMibs | 1.3.6.1.4.1.43.29 | | | |
| a3ComSwitchingSystemsMib | 1.3.6.1.4.1.43.29.4 | | | |
| a3ComFilterGroup | 1.3.6.1.4.1.43.29.4.20 | | | |
| a3ComFilterAddressGroup | 1.3.6.1.4.1.43.29.4.20.1 | | | |
| INT a3ComFilterAddressGroupNextAvailableIndex | 1.3.6.1.4.1.43.29.4.20.1.1 | INTEGER | read-only | The value of next available a3ComFilterAddressGroupId.
This object is used for index value to create a new
address group. |
| INT a3ComFilterAddressGroupCount | 1.3.6.1.4.1.43.29.4.20.1.2 | INTEGER | read-only | The count of defined address groups. |
| a3ComFilterAddressGroupTable | 1.3.6.1.4.1.43.29.4.20.1.3 | | not-accessible | A list of address group entries. A single
entry exists in this list for each defined
address group in the system. |
| a3ComFilterAddressGroupEntry | 1.3.6.1.4.1.43.29.4.20.1.3.1 | | not-accessible | An individual address group entry. |
| INT a3ComFilterAddressGroupId | 1.3.6.1.4.1.43.29.4.20.1.3.1.1 | INTEGER | read-only | This object uniquely identifies an address group in the
systems. Its value, successively increases starting from 0,
will change only if the system is rebooted. This object is
obtained from a3ComFilterAddressGroupNextAvailableIndex
when a new address group is created. |
| INT a3ComFilterAddressGroupMaskId | 1.3.6.1.4.1.43.29.4.20.1.3.1.2 | INTEGER | read-write | This object identifies an address group in a bridge. Each
address group has an unique mask identifier, range from 1 to 32,
associated with it in a bridge. This field has to be set in
order to create a new address group in the desired bridge(s). |
| OCT a3ComFilterAddressGroupBridgeMask | 1.3.6.1.4.1.43.29.4.20.1.3.1.3 | OCTET STRING | read-write | A mask that uniquely identifies the bridge value(s)
associated with this address group entry. For example,
0x0000 0000 0000 0003 represents the address group entry in
bridge number 1 and 2. |
| STR a3ComFilterAddressGroupName | 1.3.6.1.4.1.43.29.4.20.1.3.1.4 | DisplayString | read-write | The name of an address group. Each address group
has an unique name in a system. |
| ROW a3ComFilterAddressGroupStatus | 1.3.6.1.4.1.43.29.4.20.1.3.1.5 | RowStatus | read-write | The status column for this address group entry. This OBJECT
can be set to:
createAndGo(4)
destroy(6)
The following values may be read:
active(1)
Setting this object to createAndGo(4) will result in the agent attempt
to create and commit the row based on the contents of the objects in
the row. If all the necessary information is presented in the row and the
values are acceptible to the agent, the agent will change the status to
active(1). If there are any necessary objects are not set, the agent will
reject the creation request.
Setting this object to destroy(6) will delete the corresponding
address group and all the attributes of the table. |
| a3ComFilterAddressTable | 1.3.6.1.4.1.43.29.4.20.1.4 | | not-accessible | A list of address entries. |
| a3ComFilterAddressEntry | 1.3.6.1.4.1.43.29.4.20.1.4.1 | | not-accessible | A set of parameters for a particular address entry. |
| INT a3ComFilterAddressId | 1.3.6.1.4.1.43.29.4.20.1.4.1.1 | INTEGER | read-only | This object uniquely identifies an address group as
defined in a3ComFilterAddressGroupTable. It is obtained
from a3ComFilterAddressGroupNextAvailableIndex. |
| PHY a3ComFilterAddressAddress | 1.3.6.1.4.1.43.29.4.20.1.4.1.2 | PhysAddress | read-only | The physical address of this entry. |
| ROW a3ComFilterAddressStatus | 1.3.6.1.4.1.43.29.4.20.1.4.1.3 | RowStatus | read-write | The status column for this address group entry. This
OBJECT can be set to:
createAndGo(4)
destroy(6)
The following values may be read:
active(1)
Setting this object to createAndGo(4) will result in the agent attempt
to create and commit the row based on the contents of the objects in the row.
If all the necessary information is presented in the row and the
values are acceptible to the agent, the agent will change the status to
active(1). If there are any necessary objects are not set, the
agent will reject the creation request.
When the state of the row translates to active(1), the agent add the
corresponding address to the specified address group.
Setting this object to destroy(6) will remove the corresponding
address from the indicated address group. |
| a3ComFilterPortGroup | 1.3.6.1.4.1.43.29.4.20.2 | | | |
| INT a3ComFilterPortGroupNextAvailableIndex | 1.3.6.1.4.1.43.29.4.20.2.1 | INTEGER | read-only | The value of next available a3ComFilterPortGroupId.
This object is used for index value to create a new
port group. |
| INT a3ComFilterPortGroupCount | 1.3.6.1.4.1.43.29.4.20.2.2 | INTEGER | read-only | The count of defined port groups in the system. |
| a3ComFilterPortGroupTable | 1.3.6.1.4.1.43.29.4.20.2.3 | | not-accessible | A list of port group entries. A single
entry exists in this list for each defined
port group in the system. |
| a3ComFilterPortGroupEntry | 1.3.6.1.4.1.43.29.4.20.2.3.1 | | not-accessible | A set of parameters for an individual port
group entry. |
| INT a3ComFilterPortGroupId | 1.3.6.1.4.1.43.29.4.20.2.3.1.1 | INTEGER | read-only | This object uniquely identifies a port group in the
systems. Its value, successively increases starting from 0,
will change only if the system is rebooted. This object is
obtained from a3ComFilterPortGroupNextAvailableIndex
when a new port group is created. |
| INT a3ComFilterPortGroupMaskId | 1.3.6.1.4.1.43.29.4.20.2.3.1.2 | INTEGER | read-write | This object identifies a port group in a bridge. Each
port group has an unique mask identifier, range from 1 to 32,
associated with it in a bridge. This field has to be set in
order to create a new port group in a bridge. |
| INT a3ComFilterPortGroupBridgeNumber | 1.3.6.1.4.1.43.29.4.20.2.3.1.3 | INTEGER | read-write | The bridge index associated with this port group. |
| STR a3ComFilterPortGroupName | 1.3.6.1.4.1.43.29.4.20.2.3.1.4 | DisplayString | read-write | The name of this port group. This object has be
unique in a system. |
| ROW a3ComFilterPortGroupStatus | 1.3.6.1.4.1.43.29.4.20.2.3.1.5 | RowStatus | read-write | The status column for this port group entry. This OBJECT
can be set to:
createAndGo(4)
destroy(6)
The following values may be read:
active(1)
Setting this object to createAndGo(4) will result in the agent attempting
to create and commit the row based on the contents of the objects in the row.
If all the necessary information is presented in the row and the
values are acceptible to the agent, the agent will change the status to
active(1). If there are any necessary objects are not set, the
agent will reject the creation request.
When the state of the row translates to active(1), the agent add the
corresponding port to the specified port group.
Setting this object to destroy(6) will remove the corresponding port
group and its mask from the port group table. |
| a3ComFilterPortTable | 1.3.6.1.4.1.43.29.4.20.2.4 | | not-accessible | A list of port entries. |
| a3ComFilterPortEntry | 1.3.6.1.4.1.43.29.4.20.2.4.1 | | not-accessible | An individual port entry. |
| INT a3ComFilterPortId | 1.3.6.1.4.1.43.29.4.20.2.4.1.1 | INTEGER | read-only | This object uniquely identify an address group in the systems.
It successively increases starting from 1. This value is
obtained through a3ComFilterPortGroupNextAvailableIndex when
a new port group needs to be created. |
| A3C a3ComFilterPortType | 1.3.6.1.4.1.43.29.4.20.2.4.1.2 | A3ComFilterPortType | read-only | This indicates interface port type(s) that are currently
supported by LanPlex modules. |
| INT a3ComFilterPortPort | 1.3.6.1.4.1.43.29.4.20.2.4.1.3 | INTEGER | read-only | The port on the bridge identified by port type. |
| ROW a3ComFilterPortStatus | 1.3.6.1.4.1.43.29.4.20.2.4.1.4 | RowStatus | read-write | The status column for this port group entry.
This OBJECT can be set to:
createAndGo(4)
destroy(6)
The following values may be read:
active(1)
Setting this object to createAndGo(4) will result in the agent attempting
to create and commit the row based on the contents of the objects in the row.
If all the necessary information is presented in the row and the
values are acceptible to the agent, the agent will change the status to
active(1). If there are any necessary objects are not set, the
agent will reject the creation request.
When the state of the row translates to active(1), the agent will add
the corresponding port to the indicated port group.
Setting this object to destroy(6) will remove this port from
corresponding port group. |
| a3ComBridgeFilterGroup | 1.3.6.1.4.1.43.29.4.20.3 | | | |
| INT a3ComBridgeFilterNextAvailableIndex | 1.3.6.1.4.1.43.29.4.20.3.1 | INTEGER | read-only | The value of next available a3ComBridgeFilterId.
This object indicates filter id when a new bridge filter
is created through console or ftp download. |
| INT a3ComBridgeFilterCount | 1.3.6.1.4.1.43.29.4.20.3.2 | INTEGER | read-only | The count of stored bridge packet filter programs on the
bridge. |
| a3ComBridgeFilterTable | 1.3.6.1.4.1.43.29.4.20.3.3 | | not-accessible | The list of stored bridge packet filter programs on
bridge(s), bridge port(s) and port processing path. |
| a3ComBridgeFilterEntry | 1.3.6.1.4.1.43.29.4.20.3.3.1 | | not-accessible | The set of parameters for an individual bridge packet filter
program. |
| INT a3ComBridgeFilterId | 1.3.6.1.4.1.43.29.4.20.3.3.1.1 | INTEGER | read-only | An index that uniquely identifies a bridge filter in a system.
Its value will change only if the system is rebooted. |
| INT a3ComBridgeFilterBridgeNumber | 1.3.6.1.4.1.43.29.4.20.3.3.1.2 | INTEGER | read-only | The bridge index associated with this bridge
filter program. |
| STR a3ComBridgeFilterName | 1.3.6.1.4.1.43.29.4.20.3.3.1.3 | DisplayString | read-only | The filter name associated with this entry. |
| STR a3ComBridgeFilterProgram | 1.3.6.1.4.1.43.29.4.20.3.3.1.4 | DisplayString | read-only | The bridge filter program. |
| ROW a3ComBridgeFilterStatus | 1.3.6.1.4.1.43.29.4.20.3.3.1.5 | RowStatus | read-write | The status column for this filter definition entry.
This OBJECT can be set to:
createAndGo(4)
destroy(6)
The following values may be read:
active(1)
Creation of bridge filter programs can be performed by:
1. Using the build-in editor of the AdminConsole.
2. Using your own line on an external host, and transferring the
filter program via the AdminConsole.
3. Using the filter program creation tool on an external host, which
builds the filter and transfers it to the LANPlex using SNMP. The
transfer is accomplished using the file transfer MIB in the
LANPlex system MIB.
Setting this object to createAndGo(4) will result in the agent attempting
to create and commit the row based on the contents of the objects in the row.
If all the necessary information is presented in the row and the
values are acceptible to the agent, the agent will change the status to
active(1). If there are any necessary objects are not set, the
agent will reject the creation request.
When the state of the row translates to active(1), the agent will add
the corresponding filter to the specified packet processing
path(s) of the bridge port(s) in a bridge.
Setting this object to destroy(6) will remove all corresponding
attributes of the filter table. |
| a3ComPortFilterTable | 1.3.6.1.4.1.43.29.4.20.3.4 | | not-accessible | The list of stored bridge packet filter programs on
bridge(s), bridge port(s) and port processing path. |
| a3ComPortFilterEntry | 1.3.6.1.4.1.43.29.4.20.3.4.1 | | not-accessible | The set of parameters for an individual bridge packet filter
program. |
| INT a3ComPortFilterId | 1.3.6.1.4.1.43.29.4.20.3.4.1.1 | INTEGER | read-only | An index that uniquely identifies a bridge filter on the bridge. |
| INT a3ComPortFilterBridgeNumber | 1.3.6.1.4.1.43.29.4.20.3.4.1.2 | INTEGER | read-only | The bridge index associated with this bridge
filter program. |
| A3C a3ComPortFilterBridgePortType | 1.3.6.1.4.1.43.29.4.20.3.4.1.3 | A3ComFilterPortType | read-only | This indicates interface port type(s) that are currently
supported by LanPlex modules. |
| INT a3ComPortFilterBridgePortPort | 1.3.6.1.4.1.43.29.4.20.3.4.1.4 | INTEGER | read-only | The port on the bridge identified by this row's a3ComPortFilterBridgeNumber. |
| INT a3ComPortFilterPktProcessPath | 1.3.6.1.4.1.43.29.4.20.3.4.1.5 | INTEGER | read-write | The packet processing path to apply the filter. The value
is a bit mask defined as follows:
Mask Value Path Description
0x1 Xmit All All frames xmitted to segment
connected to the port
0x2 Xmit Multicast Multicast+broadcast frames
xmitted to the segment
connected to the port
0x4 Recv All All frame received by the
port from the segment
connected to the port
0x8 Recv Multicast Multicast+broadcast frames
received by the port from the
segement connected to the
port.
If mask value is set to 0x10, the packet filter will be loaded to
both transmit multicast and receive multicast paths. Once a bridge
filter program has been downloaded to a bridge port path, this
object can be applied to change its value. |
| ROW a3ComPortFilterStatus | 1.3.6.1.4.1.43.29.4.20.3.4.1.6 | RowStatus | read-write | The status column for this filter definition entry.
This OBJECT can be set to:
active(1)
createAndGo(4)
createAndWait(5)
destroy(6)
The following values may be read:
active(1)
notInService(2)
netReady(3).
Creation of bridge filter programs can be performed by:
1. Using the build-in editor of the AdminConsole.
2. Using your own line on an external host, and transferring the
filter program via the AdminConsole.
3. Using the filter program creation tool on an external host, which
builds the filter and transfers it to the LANPlex using SNMP. The
transfer is accomplished using the file transfer MIB in the
LANPlex system MIB.
Setting this object to active(1) is only valid when the current status
is active or notInService(2).
Setting this object to createAndGo(4) will result in the agent attempt
to create and commit the row based on the contents of the objects in the row.
If all the necessary information is presented in the row and the
values are acceptible to the agent, the agent will change the status to
active(1). If there are any necessary objects are not set, the
agent will reject the creation request.
Setting this object to createAndWait(5) will cause the agent to create
a row in this table. This object will change to notInService(2) if
all the information is present in the row and the values are
acceptible to the agent; otherwise, the agent will set the
status to notReady(3).
When the state of the row translates to active(1), the agent will add
the corresponding filter to the specified packet processing
path(s) of the bridge port(s) in a bridge.
Setting this object to destroy(6) will remove all corresponding
attributes of the filter table. |
